2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
38 bool "HTC EGPIO support"
39 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
41 This driver supports the CPLD egpio chip present on
42 several HTC phones. It provides basic support for input
43 pins, output pins, and irqs.
46 tristate "HTC PASIC3 LED/DS1WM chip support"
48 This core driver provides register access for the LED/DS1WM
49 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
50 HTC Magician devices, respectively. Actual functionality is
51 handled by the leds-pasic3 and ds1wm drivers.
54 tristate "Philips UCB1400 Core driver"
57 This enables support for the Philips UCB1400 core functions.
58 The UCB1400 is an AC97 audio codec.
60 To compile this driver as a module, choose M here: the
61 module will be called ucb1400_core.
64 bool "Texas Instruments TWL4030/TPS659x0 Support"
65 depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
67 Say yes here if you have TWL4030 family chip on your board.
68 This core driver provides register access and IRQ handling
69 facilities, and registers devices for the various functions
70 so that function-specific drivers can bind to them.
72 These multi-function chips are found on many OMAP2 and OMAP3
73 boards, providing power management, RTC, GPIO, keypad, a
74 high speed USB OTG transceiver, an audio codec (on most
75 versions) and many other features.
82 bool "Support Toshiba T7L66XB"
87 Support for Toshiba Mobile IO Controller T7L66XB
90 bool "Support Toshiba TC6387XB"
95 Support for Toshiba Mobile IO Controller TC6387XB
98 bool "Support Toshiba TC6393XB"
99 depends on GPIOLIB && ARM
103 Support for Toshiba Mobile IO Controller TC6393XB
106 tristate "Support Wolfson Microelectronics WM8400"
108 Support for the Wolfson Microelecronics WM8400 PMIC and audio
109 CODEC. This driver adds provides common support for accessing
110 the device, additional drivers must be enabled in order to use
111 the functionality of the device.
116 config MFD_WM8350_CONFIG_MODE_0
118 depends on MFD_WM8350
120 config MFD_WM8350_CONFIG_MODE_1
122 depends on MFD_WM8350
124 config MFD_WM8350_CONFIG_MODE_2
126 depends on MFD_WM8350
128 config MFD_WM8350_CONFIG_MODE_3
130 depends on MFD_WM8350
132 config MFD_WM8350_I2C
133 tristate "Support Wolfson Microelectronics WM8350 with I2C"
137 The WM8350 is an integrated audio and power management
138 subsystem with watchdog and RTC functionality for embedded
139 systems. This option enables core support for the WM8350 with
140 I2C as the control interface. Additional options must be
141 selected to enable support for the functionality of the chip.
145 menu "Multimedia Capabilities Port drivers"
146 depends on ARCH_SA1100
153 tristate "Support SA11x0 MCP interface"
154 depends on ARCH_SA1100
159 tristate "Support for UCB1200 / UCB1300"
162 config MCP_UCB1200_TS
163 tristate "Touchscreen interface support"
164 depends on MCP_UCB1200 && INPUT