2 * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
9 #include <linux/slab.h>
10 #include <linux/videodev2.h>
11 #include <linux/delay.h>
12 #include <linux/module.h>
13 #include <media/v4l2-device.h>
14 #include <media/tvp5150.h>
15 #include <media/v4l2-chip-ident.h>
16 #include <media/v4l2-ctrls.h>
18 #include "tvp5150_reg.h"
20 #define TVP5150_H_MAX 720
21 #define TVP5150_V_MAX_525_60 480
22 #define TVP5150_V_MAX_OTHERS 576
23 #define TVP5150_MAX_CROP_LEFT 511
24 #define TVP5150_MAX_CROP_TOP 127
25 #define TVP5150_CROP_SHIFT 2
27 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
28 MODULE_AUTHOR("Mauro Carvalho Chehab");
29 MODULE_LICENSE("GPL");
33 module_param(debug, int, 0);
34 MODULE_PARM_DESC(debug, "Debug level (0-2)");
37 struct v4l2_subdev sd;
38 struct v4l2_ctrl_handler hdl;
39 struct v4l2_rect rect;
41 v4l2_std_id norm; /* Current set standard */
47 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
49 return container_of(sd, struct tvp5150, sd);
52 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
54 return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
57 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
59 struct i2c_client *c = v4l2_get_subdevdata(sd);
60 unsigned char buffer[1];
64 if (1 != (rc = i2c_master_send(c, buffer, 1)))
65 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
69 if (1 != (rc = i2c_master_recv(c, buffer, 1)))
70 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
72 v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
77 static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
80 struct i2c_client *c = v4l2_get_subdevdata(sd);
81 unsigned char buffer[2];
86 v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
87 if (2 != (rc = i2c_master_send(c, buffer, 2)))
88 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
91 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
92 const u8 end, int max_line)
96 while (init != (u8)(end + 1)) {
97 if ((i % max_line) == 0) {
100 printk("tvp5150: %s reg 0x%02x = ", s, init);
102 printk("%02x ", tvp5150_read(sd, init));
110 static int tvp5150_log_status(struct v4l2_subdev *sd)
112 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
113 tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
114 printk("tvp5150: Analog channel controls = 0x%02x\n",
115 tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
116 printk("tvp5150: Operation mode controls = 0x%02x\n",
117 tvp5150_read(sd, TVP5150_OP_MODE_CTL));
118 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
119 tvp5150_read(sd, TVP5150_MISC_CTL));
120 printk("tvp5150: Autoswitch mask= 0x%02x\n",
121 tvp5150_read(sd, TVP5150_AUTOSW_MSK));
122 printk("tvp5150: Color killer threshold control = 0x%02x\n",
123 tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
124 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
125 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
126 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
127 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
128 printk("tvp5150: Brightness control = 0x%02x\n",
129 tvp5150_read(sd, TVP5150_BRIGHT_CTL));
130 printk("tvp5150: Color saturation control = 0x%02x\n",
131 tvp5150_read(sd, TVP5150_SATURATION_CTL));
132 printk("tvp5150: Hue control = 0x%02x\n",
133 tvp5150_read(sd, TVP5150_HUE_CTL));
134 printk("tvp5150: Contrast control = 0x%02x\n",
135 tvp5150_read(sd, TVP5150_CONTRAST_CTL));
136 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
137 tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
138 printk("tvp5150: Configuration shared pins = 0x%02x\n",
139 tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
140 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
141 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
142 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
143 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
144 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
145 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
146 printk("tvp5150: Genlock/RTC = 0x%02x\n",
147 tvp5150_read(sd, TVP5150_GENLOCK));
148 printk("tvp5150: Horizontal sync start = 0x%02x\n",
149 tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
150 printk("tvp5150: Vertical blanking start = 0x%02x\n",
151 tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
152 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
153 tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
154 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
155 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
156 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
157 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
158 tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
159 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
160 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
161 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
162 tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
163 printk("tvp5150: Video standard = 0x%02x\n",
164 tvp5150_read(sd, TVP5150_VIDEO_STD));
165 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
166 tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
167 tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
168 printk("tvp5150: Macrovision on counter = 0x%02x\n",
169 tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
170 printk("tvp5150: Macrovision off counter = 0x%02x\n",
171 tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
172 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
173 (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
174 printk("tvp5150: Device ID = %02x%02x\n",
175 tvp5150_read(sd, TVP5150_MSB_DEV_ID),
176 tvp5150_read(sd, TVP5150_LSB_DEV_ID));
177 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
178 tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
179 tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
180 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
181 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
182 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
183 printk("tvp5150: Interrupt status register B = 0x%02x\n",
184 tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
185 printk("tvp5150: Interrupt active register B = 0x%02x\n",
186 tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
187 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
188 tvp5150_read(sd, TVP5150_STATUS_REG_1),
189 tvp5150_read(sd, TVP5150_STATUS_REG_2),
190 tvp5150_read(sd, TVP5150_STATUS_REG_3),
191 tvp5150_read(sd, TVP5150_STATUS_REG_4),
192 tvp5150_read(sd, TVP5150_STATUS_REG_5));
194 dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
195 TVP5150_TELETEXT_FIL1_END, 8);
196 dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
197 TVP5150_TELETEXT_FIL2_END, 8);
199 printk("tvp5150: Teletext filter enable = 0x%02x\n",
200 tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
201 printk("tvp5150: Interrupt status register A = 0x%02x\n",
202 tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
203 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
204 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
205 printk("tvp5150: Interrupt configuration = 0x%02x\n",
206 tvp5150_read(sd, TVP5150_INT_CONF));
207 printk("tvp5150: VDP status register = 0x%02x\n",
208 tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
209 printk("tvp5150: FIFO word count = 0x%02x\n",
210 tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
211 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
212 tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
213 printk("tvp5150: FIFO reset = 0x%02x\n",
214 tvp5150_read(sd, TVP5150_FIFO_RESET));
215 printk("tvp5150: Line number interrupt = 0x%02x\n",
216 tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
217 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
218 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
219 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
220 printk("tvp5150: FIFO output control = 0x%02x\n",
221 tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
222 printk("tvp5150: Full field enable = 0x%02x\n",
223 tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
224 printk("tvp5150: Full field mode register = 0x%02x\n",
225 tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
227 dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
228 TVP5150_CC_DATA_END, 8);
230 dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
231 TVP5150_WSS_DATA_END, 8);
233 dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
234 TVP5150_VPS_DATA_END, 8);
236 dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
237 TVP5150_VITC_DATA_END, 10);
239 dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
240 TVP5150_LINE_MODE_END, 8);
244 /****************************************************************************
246 ****************************************************************************/
248 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
251 struct tvp5150 *decoder = to_tvp5150(sd);
255 if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
258 switch (decoder->input) {
259 case TVP5150_COMPOSITE1:
262 case TVP5150_COMPOSITE0:
270 v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
271 "=> tvp5150 input=%i, opmode=%i\n",
272 decoder->input, decoder->output,
275 tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
276 tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
278 /* Svideo should enable YCrCb output and disable GPCL output
279 * For Composite and TV, it should be the reverse
281 val = tvp5150_read(sd, TVP5150_MISC_CTL);
282 if (decoder->input == TVP5150_SVIDEO)
283 val = (val & ~0x40) | 0x10;
285 val = (val & ~0x10) | 0x40;
286 tvp5150_write(sd, TVP5150_MISC_CTL, val);
289 struct i2c_reg_value {
294 /* Default values as sugested at TVP5150AM1 datasheet */
295 static const struct i2c_reg_value tvp5150_init_default[] = {
297 TVP5150_VD_IN_SRC_SEL_1,0x00
300 TVP5150_ANAL_CHL_CTL,0x15
303 TVP5150_OP_MODE_CTL,0x00
306 TVP5150_MISC_CTL,0x01
309 TVP5150_COLOR_KIL_THSH_CTL,0x10
312 TVP5150_LUMA_PROC_CTL_1,0x60
315 TVP5150_LUMA_PROC_CTL_2,0x00
318 TVP5150_BRIGHT_CTL,0x80
321 TVP5150_SATURATION_CTL,0x80
327 TVP5150_CONTRAST_CTL,0x80
330 TVP5150_DATA_RATE_SEL,0x47
333 TVP5150_LUMA_PROC_CTL_3,0x00
336 TVP5150_CONF_SHARED_PIN,0x08
339 TVP5150_ACT_VD_CROP_ST_MSB,0x00
342 TVP5150_ACT_VD_CROP_ST_LSB,0x00
345 TVP5150_ACT_VD_CROP_STP_MSB,0x00
348 TVP5150_ACT_VD_CROP_STP_LSB,0x00
354 TVP5150_HORIZ_SYNC_START,0x80
357 TVP5150_VERT_BLANKING_START,0x00
360 TVP5150_VERT_BLANKING_STOP,0x00
363 TVP5150_CHROMA_PROC_CTL_1,0x0c
366 TVP5150_CHROMA_PROC_CTL_2,0x14
369 TVP5150_INT_RESET_REG_B,0x00
372 TVP5150_INT_ENABLE_REG_B,0x00
375 TVP5150_INTT_CONFIG_REG_B,0x00
378 TVP5150_VIDEO_STD,0x00
381 TVP5150_MACROVISION_ON_CTR,0x0f
384 TVP5150_MACROVISION_OFF_CTR,0x01
387 TVP5150_TELETEXT_FIL_ENA,0x00
390 TVP5150_INT_STATUS_REG_A,0x00
393 TVP5150_INT_ENABLE_REG_A,0x00
396 TVP5150_INT_CONF,0x04
399 TVP5150_FIFO_INT_THRESHOLD,0x80
402 TVP5150_FIFO_RESET,0x00
405 TVP5150_LINE_NUMBER_INT,0x00
408 TVP5150_PIX_ALIGN_REG_LOW,0x4e
411 TVP5150_PIX_ALIGN_REG_HIGH,0x00
414 TVP5150_FIFO_OUT_CTRL,0x01
417 TVP5150_FULL_FIELD_ENA,0x00
420 TVP5150_LINE_MODE_INI,0x00
423 TVP5150_FULL_FIELD_MODE_REG,0x7f
430 /* Default values as sugested at TVP5150AM1 datasheet */
431 static const struct i2c_reg_value tvp5150_init_enable[] = {
433 TVP5150_CONF_SHARED_PIN, 2
434 },{ /* Automatic offset and AGC enabled */
435 TVP5150_ANAL_CHL_CTL, 0x15
436 },{ /* Activate YCrCb output 0x9 or 0xd ? */
437 TVP5150_MISC_CTL, 0x6f
438 },{ /* Activates video std autodetection for all standards */
439 TVP5150_AUTOSW_MSK, 0x0
440 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
441 TVP5150_DATA_RATE_SEL, 0x47
443 TVP5150_CHROMA_PROC_CTL_1, 0x0c
445 TVP5150_CHROMA_PROC_CTL_2, 0x54
446 },{ /* Non documented, but initialized on WinTV USB2 */
453 struct tvp5150_vbi_type {
454 unsigned int vbi_type;
455 unsigned int ini_line;
456 unsigned int end_line;
457 unsigned int by_field :1;
460 struct i2c_vbi_ram_value {
462 struct tvp5150_vbi_type type;
463 unsigned char values[16];
466 /* This struct have the values for each supported VBI Standard
468 tvp5150_vbi_types should follow the same order as vbi_ram_default
469 * value 0 means rom position 0x10, value 1 means rom position 0x30
470 * and so on. There are 16 possible locations from 0 to 15.
473 static struct i2c_vbi_ram_value vbi_ram_default[] =
475 /* FIXME: Current api doesn't handle all VBI types, those not
476 yet supported are placed under #if 0 */
478 {0x010, /* Teletext, SECAM, WST System A */
479 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
480 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
481 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
484 {0x030, /* Teletext, PAL, WST System B */
485 {V4L2_SLICED_TELETEXT_B,6,22,1},
486 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
487 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
490 {0x050, /* Teletext, PAL, WST System C */
491 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
492 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
493 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
495 {0x070, /* Teletext, NTSC, WST System B */
496 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
497 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
498 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
500 {0x090, /* Tetetext, NTSC NABTS System C */
501 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
502 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
503 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
505 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
506 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
507 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
508 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
510 {0x0d0, /* Closed Caption, PAL/SECAM */
511 {V4L2_SLICED_CAPTION_625,22,22,1},
512 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
513 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
516 {0x0f0, /* Closed Caption, NTSC */
517 {V4L2_SLICED_CAPTION_525,21,21,1},
518 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
519 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
521 {0x110, /* Wide Screen Signal, PAL/SECAM */
522 {V4L2_SLICED_WSS_625,23,23,1},
523 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
524 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
527 {0x130, /* Wide Screen Signal, NTSC C */
528 {V4L2_SLICED_WSS_525,20,20,1},
529 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
530 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
532 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
533 {V4l2_SLICED_VITC_625,6,22,0},
534 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
535 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
537 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
538 {V4l2_SLICED_VITC_525,10,20,0},
539 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
540 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
543 {0x190, /* Video Program System (VPS), PAL */
544 {V4L2_SLICED_VPS,16,16,0},
545 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
546 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
548 /* 0x1d0 User programmable */
554 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
555 const struct i2c_reg_value *regs)
557 while (regs->reg != 0xff) {
558 tvp5150_write(sd, regs->reg, regs->value);
564 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
565 const struct i2c_vbi_ram_value *regs)
569 /* Disable Full Field */
570 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
572 /* Before programming, Line mode should be at 0xff */
573 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
574 tvp5150_write(sd, i, 0xff);
577 while (regs->reg != (u16)-1) {
578 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
579 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
581 for (i = 0; i < 16; i++)
582 tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
589 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
590 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
591 struct v4l2_sliced_vbi_cap *cap)
593 const struct i2c_vbi_ram_value *regs = vbi_ram_default;
596 v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
597 memset(cap, 0, sizeof *cap);
599 while (regs->reg != (u16)-1 ) {
600 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
601 cap->service_lines[0][line] |= regs->type.vbi_type;
603 cap->service_set |= regs->type.vbi_type;
610 /* Set vbi processing
611 * type - one of tvp5150_vbi_types
612 * line - line to gather data
613 * fields: bit 0 field1, bit 1, field2
614 * flags (default=0xf0) is a bitmask, were set means:
615 * bit 7: enable filtering null bytes on CC
616 * bit 6: send data also to FIFO
617 * bit 5: don't allow data with errors on FIFO
618 * bit 4: enable ECC when possible
619 * pix_align = pix alignment:
623 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
624 const struct i2c_vbi_ram_value *regs,
625 unsigned int type,u8 flags, int line,
628 struct tvp5150 *decoder = to_tvp5150(sd);
629 v4l2_std_id std = decoder->norm;
633 if (std == V4L2_STD_ALL) {
634 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
636 } else if (std & V4L2_STD_625_50) {
637 /* Don't follow NTSC Line number convension */
644 while (regs->reg != (u16)-1 ) {
645 if ((type & regs->type.vbi_type) &&
646 (line>=regs->type.ini_line) &&
647 (line<=regs->type.end_line)) {
648 type=regs->type.vbi_type;
655 if (regs->reg == (u16)-1)
658 type=pos | (flags & 0xf0);
659 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
662 tvp5150_write(sd, reg, type);
666 tvp5150_write(sd, reg+1, type);
672 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
673 const struct i2c_vbi_ram_value *regs, int line)
675 struct tvp5150 *decoder = to_tvp5150(sd);
676 v4l2_std_id std = decoder->norm;
680 if (std == V4L2_STD_ALL) {
681 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
683 } else if (std & V4L2_STD_625_50) {
684 /* Don't follow NTSC Line number convension */
688 if (line < 6 || line > 27)
691 reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
693 pos = tvp5150_read(sd, reg) & 0x0f;
695 type = regs[pos].type.vbi_type;
697 pos = tvp5150_read(sd, reg + 1) & 0x0f;
699 type |= regs[pos].type.vbi_type;
704 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
706 struct tvp5150 *decoder = to_tvp5150(sd);
711 /* First tests should be against specific std */
713 if (std == V4L2_STD_ALL) {
714 fmt = VIDEO_STD_AUTO_SWITCH_BIT; /* Autodetect mode */
715 } else if (std & V4L2_STD_NTSC_443) {
716 fmt = VIDEO_STD_NTSC_4_43_BIT;
717 } else if (std & V4L2_STD_PAL_M) {
718 fmt = VIDEO_STD_PAL_M_BIT;
719 } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
720 fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
722 /* Then, test against generic ones */
723 if (std & V4L2_STD_NTSC)
724 fmt = VIDEO_STD_NTSC_MJ_BIT;
725 else if (std & V4L2_STD_PAL)
726 fmt = VIDEO_STD_PAL_BDGHIN_BIT;
727 else if (std & V4L2_STD_SECAM)
728 fmt = VIDEO_STD_SECAM_BIT;
731 v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
732 tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
736 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
738 struct tvp5150 *decoder = to_tvp5150(sd);
740 if (decoder->norm == std)
743 /* Change cropping height limits */
744 if (std & V4L2_STD_525_60)
745 decoder->rect.height = TVP5150_V_MAX_525_60;
747 decoder->rect.height = TVP5150_V_MAX_OTHERS;
750 return tvp5150_set_std(sd, std);
753 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
755 struct tvp5150 *decoder = to_tvp5150(sd);
757 /* Initializes TVP5150 to its default values */
758 tvp5150_write_inittab(sd, tvp5150_init_default);
760 /* Initializes VDP registers */
761 tvp5150_vdp_init(sd, vbi_ram_default);
763 /* Selects decoder input */
766 /* Initializes TVP5150 to stream enabled values */
767 tvp5150_write_inittab(sd, tvp5150_init_enable);
769 /* Initialize image preferences */
770 v4l2_ctrl_handler_setup(&decoder->hdl);
772 tvp5150_set_std(sd, decoder->norm);
776 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
778 struct v4l2_subdev *sd = to_sd(ctrl);
781 case V4L2_CID_BRIGHTNESS:
782 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
784 case V4L2_CID_CONTRAST:
785 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
787 case V4L2_CID_SATURATION:
788 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
791 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
797 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
799 int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
801 switch (val & 0x0F) {
803 return V4L2_STD_NTSC;
807 return V4L2_STD_PAL_M;
809 return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
811 return V4L2_STD_NTSC_443;
813 return V4L2_STD_SECAM;
815 return V4L2_STD_UNKNOWN;
819 static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
820 enum v4l2_mbus_pixelcode *code)
825 *code = V4L2_MBUS_FMT_YUYV8_2X8;
829 static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
830 struct v4l2_mbus_framefmt *f)
832 struct tvp5150 *decoder = to_tvp5150(sd);
838 tvp5150_reset(sd, 0);
840 /* Calculate height and width based on current standard */
841 if (decoder->norm == V4L2_STD_ALL)
842 std = tvp5150_read_std(sd);
846 f->width = decoder->rect.width;
847 f->height = decoder->rect.height;
849 f->code = V4L2_MBUS_FMT_YUYV8_2X8;
850 f->field = V4L2_FIELD_SEQ_TB;
851 f->colorspace = V4L2_COLORSPACE_SMPTE170M;
853 v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
858 static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
860 struct v4l2_rect rect = a->c;
861 struct tvp5150 *decoder = to_tvp5150(sd);
865 v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
866 __func__, rect.left, rect.top, rect.width, rect.height);
868 if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
871 /* tvp5150 has some special limits */
872 rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
873 rect.width = clamp(rect.width,
874 TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
875 TVP5150_H_MAX - rect.left);
876 rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
878 /* Calculate height based on current standard */
879 if (decoder->norm == V4L2_STD_ALL)
880 std = tvp5150_read_std(sd);
884 if (std & V4L2_STD_525_60)
885 hmax = TVP5150_V_MAX_525_60;
887 hmax = TVP5150_V_MAX_OTHERS;
889 rect.height = clamp(rect.height,
890 hmax - TVP5150_MAX_CROP_TOP - rect.top,
893 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
894 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
895 rect.top + rect.height - hmax);
896 tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
897 rect.left >> TVP5150_CROP_SHIFT);
898 tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
899 rect.left | (1 << TVP5150_CROP_SHIFT));
900 tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
901 (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
903 tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
904 rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
906 decoder->rect = rect;
911 static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
913 struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
915 a->c = decoder->rect;
916 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
921 static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
923 struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
926 if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
931 a->bounds.width = TVP5150_H_MAX;
933 /* Calculate height based on current standard */
934 if (decoder->norm == V4L2_STD_ALL)
935 std = tvp5150_read_std(sd);
939 if (std & V4L2_STD_525_60)
940 a->bounds.height = TVP5150_V_MAX_525_60;
942 a->bounds.height = TVP5150_V_MAX_OTHERS;
944 a->defrect = a->bounds;
945 a->pixelaspect.numerator = 1;
946 a->pixelaspect.denominator = 1;
951 /****************************************************************************
953 ****************************************************************************/
955 static int tvp5150_s_routing(struct v4l2_subdev *sd,
956 u32 input, u32 output, u32 config)
958 struct tvp5150 *decoder = to_tvp5150(sd);
960 decoder->input = input;
961 decoder->output = output;
966 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
968 /* this is for capturing 36 raw vbi lines
969 if there's a way to cut off the beginning 2 vbi lines
970 with the tvp5150 then the vbi line count could be lowered
971 to 17 lines/field again, although I couldn't find a register
972 which could do that cropping */
973 if (fmt->sample_format == V4L2_PIX_FMT_GREY)
974 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
975 if (fmt->count[0] == 18 && fmt->count[1] == 18) {
976 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
977 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
982 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
986 if (svbi->service_set != 0) {
987 for (i = 0; i <= 23; i++) {
988 svbi->service_lines[1][i] = 0;
989 svbi->service_lines[0][i] =
990 tvp5150_set_vbi(sd, vbi_ram_default,
991 svbi->service_lines[0][i], 0xf0, i, 3);
994 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
997 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
999 /* Disable Full Field */
1000 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1002 /* Disable Line modes */
1003 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1004 tvp5150_write(sd, i, 0xff);
1009 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1013 memset(svbi, 0, sizeof(*svbi));
1015 for (i = 0; i <= 23; i++) {
1016 svbi->service_lines[0][i] =
1017 tvp5150_get_vbi(sd, vbi_ram_default, i);
1018 mask |= svbi->service_lines[0][i];
1020 svbi->service_set = mask;
1024 static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
1025 struct v4l2_dbg_chip_ident *chip)
1028 struct i2c_client *client = v4l2_get_subdevdata(sd);
1030 rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 |
1031 tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
1033 return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150,
1038 #ifdef CONFIG_VIDEO_ADV_DEBUG
1039 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1041 struct i2c_client *client = v4l2_get_subdevdata(sd);
1043 if (!v4l2_chip_match_i2c_client(client, ®->match))
1045 if (!capable(CAP_SYS_ADMIN))
1047 reg->val = tvp5150_read(sd, reg->reg & 0xff);
1052 static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1054 struct i2c_client *client = v4l2_get_subdevdata(sd);
1056 if (!v4l2_chip_match_i2c_client(client, ®->match))
1058 if (!capable(CAP_SYS_ADMIN))
1060 tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1065 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1067 int status = tvp5150_read(sd, 0x88);
1069 vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1073 /* ----------------------------------------------------------------------- */
1075 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1076 .s_ctrl = tvp5150_s_ctrl,
1079 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1080 .log_status = tvp5150_log_status,
1081 .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
1082 .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
1083 .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
1084 .g_ctrl = v4l2_subdev_g_ctrl,
1085 .s_ctrl = v4l2_subdev_s_ctrl,
1086 .queryctrl = v4l2_subdev_queryctrl,
1087 .querymenu = v4l2_subdev_querymenu,
1088 .s_std = tvp5150_s_std,
1089 .reset = tvp5150_reset,
1090 .g_chip_ident = tvp5150_g_chip_ident,
1091 #ifdef CONFIG_VIDEO_ADV_DEBUG
1092 .g_register = tvp5150_g_register,
1093 .s_register = tvp5150_s_register,
1097 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1098 .g_tuner = tvp5150_g_tuner,
1101 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1102 .s_routing = tvp5150_s_routing,
1103 .enum_mbus_fmt = tvp5150_enum_mbus_fmt,
1104 .s_mbus_fmt = tvp5150_mbus_fmt,
1105 .try_mbus_fmt = tvp5150_mbus_fmt,
1106 .g_mbus_fmt = tvp5150_mbus_fmt,
1107 .s_crop = tvp5150_s_crop,
1108 .g_crop = tvp5150_g_crop,
1109 .cropcap = tvp5150_cropcap,
1112 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1113 .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1114 .g_sliced_fmt = tvp5150_g_sliced_fmt,
1115 .s_sliced_fmt = tvp5150_s_sliced_fmt,
1116 .s_raw_fmt = tvp5150_s_raw_fmt,
1119 static const struct v4l2_subdev_ops tvp5150_ops = {
1120 .core = &tvp5150_core_ops,
1121 .tuner = &tvp5150_tuner_ops,
1122 .video = &tvp5150_video_ops,
1123 .vbi = &tvp5150_vbi_ops,
1127 /****************************************************************************
1129 ****************************************************************************/
1131 static int tvp5150_probe(struct i2c_client *c,
1132 const struct i2c_device_id *id)
1134 struct tvp5150 *core;
1135 struct v4l2_subdev *sd;
1136 u8 msb_id, lsb_id, msb_rom, lsb_rom;
1138 /* Check if the adapter supports the needed features */
1139 if (!i2c_check_functionality(c->adapter,
1140 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1143 core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
1148 v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1149 v4l_info(c, "chip found @ 0x%02x (%s)\n",
1150 c->addr << 1, c->adapter->name);
1152 msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
1153 lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
1154 msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
1155 lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
1157 if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
1158 v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
1160 /* ITU-T BT.656.4 timing */
1161 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1163 if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
1164 v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
1166 v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
1168 v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
1172 core->norm = V4L2_STD_ALL; /* Default is autodetect */
1173 core->input = TVP5150_COMPOSITE1;
1176 v4l2_ctrl_handler_init(&core->hdl, 4);
1177 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1178 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1179 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1180 V4L2_CID_CONTRAST, 0, 255, 1, 128);
1181 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1182 V4L2_CID_SATURATION, 0, 255, 1, 128);
1183 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1184 V4L2_CID_HUE, -128, 127, 1, 0);
1185 sd->ctrl_handler = &core->hdl;
1186 if (core->hdl.error) {
1187 int err = core->hdl.error;
1189 v4l2_ctrl_handler_free(&core->hdl);
1193 v4l2_ctrl_handler_setup(&core->hdl);
1195 /* Default is no cropping */
1197 if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1198 core->rect.height = TVP5150_V_MAX_525_60;
1200 core->rect.height = TVP5150_V_MAX_OTHERS;
1201 core->rect.left = 0;
1202 core->rect.width = TVP5150_H_MAX;
1205 tvp5150_log_status(sd);
1209 static int tvp5150_remove(struct i2c_client *c)
1211 struct v4l2_subdev *sd = i2c_get_clientdata(c);
1212 struct tvp5150 *decoder = to_tvp5150(sd);
1214 v4l2_dbg(1, debug, sd,
1215 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1218 v4l2_device_unregister_subdev(sd);
1219 v4l2_ctrl_handler_free(&decoder->hdl);
1220 kfree(to_tvp5150(sd));
1224 /* ----------------------------------------------------------------------- */
1226 static const struct i2c_device_id tvp5150_id[] = {
1230 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1232 static struct i2c_driver tvp5150_driver = {
1234 .owner = THIS_MODULE,
1237 .probe = tvp5150_probe,
1238 .remove = tvp5150_remove,
1239 .id_table = tvp5150_id,
1242 module_i2c_driver(tvp5150_driver);