1 # SPDX-License-Identifier: GPL-2.0-only
2 config LEDS_GPIO_REGISTER
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
12 Say Y to enable Linux LED support. This allows control of supported
13 LEDs from both userspace and optionally, by kernel events (triggers).
18 tristate "LED Class Support"
20 This option enables the LED sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say Y.
23 config LEDS_CLASS_FLASH
24 tristate "LED Flash Class Support"
27 This option enables the flash LED sysfs class in /sys/class/leds.
28 It wraps LED Class and adds flash LEDs specific sysfs attributes
29 and kernel internal API to it. You'll need this to provide support
30 for the flash related features of a LED device. It can be built
33 config LEDS_CLASS_MULTICOLOR
34 tristate "LED Multicolor Class Support"
37 This option enables the multicolor LED sysfs class in /sys/class/leds.
38 It wraps LED class and adds multicolor LED specific sysfs attributes
39 and kernel internal API to it. You'll need this to provide support
40 for multicolor LEDs that are grouped together. This class is not
41 intended for single color LEDs. It can be built as a module.
43 config LEDS_BRIGHTNESS_HW_CHANGED
44 bool "LED Class brightness_hw_changed attribute support"
47 This option enables support for the brightness_hw_changed attribute
48 for LED sysfs class devices under /sys/class/leds.
50 See Documentation/ABI/testing/sysfs-class-led for details.
55 tristate "LED Support for Marvell 88PM860x PMIC"
57 depends on MFD_88PM860X
59 This option enables support for on-chip LED drivers found on Marvell
60 Semiconductor 88PM8606 PMIC.
63 tristate "LED support for Panasonic AN30259A"
64 depends on LEDS_CLASS && I2C && OF
66 This option enables support for the AN30259A 3-channel
69 To compile this driver as a module, choose M here: the module
70 will be called leds-an30259a.
73 tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
77 This driver makes the PC Engines APU1 front panel LEDs
78 accessible from userspace programs through the LED subsystem.
80 If you're looking for APU2/3, use the pcengines-apu2 driver.
81 (symbol CONFIG_PCENGINES_APU2)
83 To compile this driver as a module, choose M here: the
84 module will be called leds-apu.
87 tristate "Dell Wyse 3020 status LED support"
89 depends on (MACH_MMP3_DT && MFD_ENE_KB3930) || COMPILE_TEST
91 This driver adds support for controlling the front panel status
92 LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
95 Say Y to if your machine is a Dell Wyse 3020 thin client.
98 tristate "LED support for Awinic AW2013"
99 depends on LEDS_CLASS && I2C && OF
101 This option enables support for the AW2013 3-channel
104 To compile this driver as a module, choose M here: the module
105 will be called leds-aw2013.
108 tristate "LED Support for Broadcom BCM6328"
109 depends on LEDS_CLASS
113 This option enables support for LEDs connected to the BCM6328
114 LED HW controller accessed via MMIO registers.
117 tristate "LED Support for Broadcom BCM6358"
118 depends on LEDS_CLASS
122 This option enables support for LEDs connected to the BCM6358
123 LED HW controller accessed via MMIO registers.
126 tristate "LED Support for Motorola CPCAP"
127 depends on LEDS_CLASS
131 This option enables support for LEDs offered by Motorola's
134 config LEDS_CR0014114
135 tristate "LED Support for Crane CR0014114"
136 depends on LEDS_CLASS
140 This option enables support for CR0014114 LED Board which
141 is widely used in vending machines produced by
142 Crane Merchandising Systems.
144 To compile this driver as a module, choose M here: the module
145 will be called leds-cr0014114.
147 config LEDS_EL15203000
148 tristate "LED Support for Crane EL15203000"
149 depends on LEDS_CLASS
153 This option enables support for EL15203000 LED Board
154 (aka RED LED board) which is widely used in coffee vending
155 machines produced by Crane Merchandising Systems.
157 To compile this driver as a module, choose M here: the module
158 will be called leds-el15203000.
160 config LEDS_TURRIS_OMNIA
161 tristate "LED support for CZ.NIC's Turris Omnia"
162 depends on LEDS_CLASS_MULTICOLOR
164 depends on MACH_ARMADA_38X || COMPILE_TEST
167 This option enables basic support for the LEDs found on the front
168 side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
172 tristate "LCD Backlight driver for LM3530"
173 depends on LEDS_CLASS
176 This option enables support for the LCD backlight using
177 LM3530 ambient light sensor chip. This ALS chip can be
178 controlled manually or using PWM input or using ambient
182 tristate "LCD Backlight driver for LM3532"
184 depends on LEDS_CLASS
187 This option enables support for the LCD backlight using
188 LM3532 ambient light sensor chip. This ALS chip can be
189 controlled manually or using PWM input or using ambient
193 tristate "LED support for LM3533"
194 depends on LEDS_CLASS
195 depends on MFD_LM3533
197 This option enables support for the LEDs on National Semiconductor /
198 TI LM3533 Lighting Power chips.
200 The LEDs can be controlled directly, through PWM input, or by the
201 ambient-light-sensor interface. The chip supports
202 hardware-accelerated blinking with maximum on and off periods of 9.8
203 and 77 seconds respectively.
206 tristate "LED support for LM3642 Chip"
207 depends on LEDS_CLASS && I2C
210 This option enables support for LEDs connected to LM3642.
211 The LM3642 is a 4MHz fixed-frequency synchronous boost
212 converter plus 1.5A constant current driver for a high-current
216 tristate "LED support for LM3692x Chips"
217 depends on LEDS_CLASS && I2C && OF
220 This option enables support for the TI LM3692x family
221 of white LED string drivers used for backlighting.
224 tristate "LED Support for Locomo device"
225 depends on LEDS_CLASS
226 depends on SHARP_LOCOMO
228 This option enables support for the LEDs on Sharp Locomo.
229 Zaurus models SL-5500 and SL-5600.
231 config LEDS_MIKROTIK_RB532
232 tristate "LED Support for Mikrotik Routerboard 532"
233 depends on LEDS_CLASS
234 depends on MIKROTIK_RB532
236 This option enables support for the so called "User LED" of
237 Mikrotik's Routerboard 532.
240 tristate "LED Support for Mediatek MT6323 PMIC"
241 depends on LEDS_CLASS
242 depends on MFD_MT6397
244 This option enables support for on-chip LED drivers found on
245 Mediatek MT6323 PMIC.
248 tristate "LED Support for Soekris net48xx series Error LED"
249 depends on LEDS_CLASS
250 depends on SCx200_GPIO
252 This option enables support for the Soekris net4801 and net4826 error
256 tristate "LED Support for the WRAP series LEDs"
257 depends on LEDS_CLASS
258 depends on SCx200_GPIO
260 This option enables support for the PCEngines WRAP programmable LEDs.
262 config LEDS_COBALT_QUBE
263 tristate "LED Support for the Cobalt Qube series front LED"
264 depends on LEDS_CLASS
265 depends on MIPS_COBALT || COMPILE_TEST
267 This option enables support for the front LED on Cobalt Qube series
269 config LEDS_COBALT_RAQ
270 bool "LED Support for the Cobalt Raq series"
271 depends on LEDS_CLASS=y && (MIPS_COBALT || COMPILE_TEST)
274 This option enables support for the Cobalt Raq series LEDs.
277 tristate "LED support for SunFire servers."
278 depends on LEDS_CLASS
282 This option enables support for the Left, Middle, and Right
283 LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
285 config LEDS_IPAQ_MICRO
286 tristate "LED Support for the Compaq iPAQ h3xxx"
287 depends on LEDS_CLASS
288 depends on MFD_IPAQ_MICRO
290 Choose this option if you want to use the notification LED on
291 Compaq/HP iPAQ h3100 and h3600.
294 tristate "LED Support for the HP Jornada 6xx"
295 depends on LEDS_CLASS
298 This option enables LED support for the handheld
299 HP Jornada 620/660/680/690.
302 tristate "LED driver for PCA9532 dimmer"
303 depends on LEDS_CLASS
304 depends on I2C && INPUT
306 This option enables support for NXP pca9532
307 LED controller. It is generally only useful
310 config LEDS_PCA9532_GPIO
311 bool "Enable GPIO support for PCA9532"
312 depends on LEDS_PCA9532
315 Allow unused pins on PCA9532 to be used as gpio.
317 To use a pin as gpio pca9532_type in pca9532_platform data needs to
318 set to PCA9532_TYPE_GPIO.
321 tristate "LED Support for GPIO connected LEDs"
322 depends on LEDS_CLASS
323 depends on GPIOLIB || COMPILE_TEST
325 This option enables support for the LEDs connected to GPIO
326 outputs. To be useful the particular board must have LEDs
327 and they must be connected to the GPIO lines. The LEDs must be
328 defined as platform devices and/or OpenFirmware platform devices.
329 The code to use these bindings can be selected below.
332 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
333 depends on LEDS_CLASS
336 This option enables support for LEDs connected to the National
337 Semiconductor LP3944 Lighting Management Unit (LMU) also known as
340 To compile this driver as a module, choose M here: the
341 module will be called leds-lp3944.
344 tristate "LED Support for TI LP3952 2 channel LED driver"
345 depends on LEDS_CLASS
350 This option enables support for LEDs connected to the Texas
351 Instruments LP3952 LED driver.
353 To compile this driver as a module, choose M here: the
354 module will be called leds-lp3952.
357 tristate "LED Support for TI LP5036/30/24/18/12/09 LED driver chip"
358 depends on LEDS_CLASS && REGMAP_I2C
359 depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
361 If you say yes here you get support for the Texas Instruments
362 LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
364 To compile this driver as a module, choose M here: the
365 module will be called leds-lp50xx.
367 config LEDS_LP55XX_COMMON
368 tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
369 depends on LEDS_CLASS
370 depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
374 select FW_LOADER_USER_HELPER
376 This option supports common operations for LP5521/5523/55231/5562/8501
380 tristate "LED Support for N.S. LP5521 LED driver chip"
381 depends on LEDS_CLASS && I2C
382 depends on LEDS_LP55XX_COMMON
384 If you say yes here you get support for the National Semiconductor
385 LP5521 LED driver. It is 3 channel chip with programmable engines.
386 Driver provides direct control via LED class and interface for
387 programming the engines.
390 tristate "LED Support for TI/National LP5523/55231 LED driver chip"
391 depends on LEDS_CLASS && I2C
392 depends on LEDS_LP55XX_COMMON
394 If you say yes here you get support for TI/National Semiconductor
395 LP5523/55231 LED driver.
396 It is 9 channel chip with programmable engines.
397 Driver provides direct control via LED class and interface for
398 programming the engines.
401 tristate "LED Support for TI LP5562 LED driver chip"
402 depends on LEDS_CLASS && I2C
403 depends on LEDS_LP55XX_COMMON
405 If you say yes here you get support for TI LP5562 LED driver.
406 It is 4 channels chip with programmable engines.
407 Driver provides direct control via LED class and interface for
408 programming the engines.
411 tristate "LED Support for TI LP8501 LED driver chip"
412 depends on LEDS_CLASS && I2C
413 depends on LEDS_LP55XX_COMMON
415 If you say yes here you get support for TI LP8501 LED driver.
416 It is 9 channel chip with programmable engines.
417 Driver provides direct control via LED class and interface for
418 programming the engines.
419 It is similar as LP5523, but output power selection is available.
420 And register layout and engine program schemes are different.
423 tristate "LED support for the TI LP8788 PMIC"
424 depends on LEDS_CLASS
425 depends on MFD_LP8788
427 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
430 tristate "LED support for the TI LP8860 4 channel LED driver"
431 depends on LEDS_CLASS && I2C && OF
434 If you say yes here you get support for the TI LP8860 4 channel
436 This option enables support for the display cluster LEDs
437 on the LP8860 4 channel LED driver using the I2C communication
440 config LEDS_CLEVO_MAIL
441 tristate "Mail LED on Clevo notebook"
442 depends on LEDS_CLASS && BROKEN
443 depends on X86 && SERIO_I8042 && DMI
445 This driver makes the mail LED accessible from userspace
446 programs through the LEDs subsystem. This LED has three
447 known modes: off, blink at 0.5Hz and blink at 1Hz.
449 The driver supports two kinds of interface: using ledtrig-timer
450 or through /sys/class/leds/clevo::mail/brightness. As this LED
451 cannot change its brightness it blinks instead. The brightness
452 value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
455 This module can drive the mail LED for the following notebooks:
460 Clevo D400V/D470V (not tested, but might work)
462 Clevo M5x0N (not tested, but might work)
463 Positivo Mobile (Clevo M5x0V)
465 If your model is not listed here you can try the "nodetect"
468 To compile this driver as a module, choose M here: the
469 module will be called leds-clevo-mail.
472 tristate "LED Support for PCA955x I2C chips"
473 depends on LEDS_CLASS
476 This option enables support for LEDs connected to PCA955x
477 LED driver chips accessed via the I2C bus. Supported
478 devices include PCA9550, PCA9551, PCA9552, and PCA9553.
480 config LEDS_PCA955X_GPIO
481 bool "Enable GPIO support for PCA955X"
482 depends on LEDS_PCA955X
485 Allow unused pins on PCA955X to be used as gpio.
487 To use a pin as gpio the pin type should be set to
488 PCA955X_TYPE_GPIO in the device tree.
492 tristate "LED support for PCA963x I2C chip"
493 depends on LEDS_CLASS
496 This option enables support for LEDs connected to the PCA963x
497 LED driver chip accessed via the I2C bus. Supported
498 devices include PCA9633 and PCA9634
500 config LEDS_WM831X_STATUS
501 tristate "LED support for status LEDs on WM831x PMICs"
502 depends on LEDS_CLASS
503 depends on MFD_WM831X
505 This option enables support for the status LEDs of the WM831x
509 tristate "LED Support for WM8350 AudioPlus PMIC"
510 depends on LEDS_CLASS
511 depends on MFD_WM8350
513 This option enables support for LEDs driven by the Wolfson
514 Microelectronics WM8350 AudioPlus PMIC.
517 tristate "LED Support for DA9030/DA9034 PMIC"
518 depends on LEDS_CLASS
519 depends on PMIC_DA903X
521 This option enables support for on-chip LED drivers found
522 on Dialog Semiconductor DA9030/DA9034 PMICs.
525 tristate "Dialog DA9052/DA9053 LEDS"
526 depends on LEDS_CLASS
527 depends on PMIC_DA9052
529 This option enables support for on-chip LED drivers found
530 on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
532 config LEDS_DAC124S085
533 tristate "LED Support for DAC124S085 SPI DAC"
534 depends on LEDS_CLASS
537 This option enables support for DAC124S085 SPI DAC from NatSemi,
538 which can be used to control up to four LEDs.
541 tristate "PWM driven LED Support"
542 depends on LEDS_CLASS
545 This option enables support for pwm driven LEDs
547 config LEDS_REGULATOR
548 tristate "REGULATOR driven LED support"
549 depends on LEDS_CLASS
552 This option enables support for regulator driven LEDs.
555 tristate "LED driver for BD2802 RGB LED"
556 depends on LEDS_CLASS
559 This option enables support for BD2802GU RGB LED driver chips
560 accessed via the I2C bus.
562 config LEDS_INTEL_SS4200
563 tristate "LED driver for Intel NAS SS4200 series"
564 depends on LEDS_CLASS
565 depends on PCI && DMI
568 This option enables support for the Intel SS4200 series of
569 Network Attached Storage servers. You may control the hard
570 drive or power LEDs on the front panel. Using this driver
571 can stop the front LED from blinking after startup.
574 tristate "LED driver for LT3593 controllers"
575 depends on LEDS_CLASS
576 depends on GPIOLIB || COMPILE_TEST
578 This option enables support for LEDs driven by a Linear Technology
579 LT3593 controller. This controller uses a special one-wire pulse
580 coding protocol to set the brightness.
583 tristate "LED Support for ADP5520/ADP5501 PMIC"
584 depends on LEDS_CLASS
585 depends on PMIC_ADP5520
587 This option enables support for on-chip LED drivers found
588 on Analog Devices ADP5520/ADP5501 PMICs.
590 To compile this driver as a module, choose M here: the module will
591 be called leds-adp5520.
594 tristate "LED Support for MC13XXX PMIC"
595 depends on LEDS_CLASS
596 depends on MFD_MC13XXX
598 This option enables support for on-chip LED drivers found
599 on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
602 tristate "LED support for Network Space v2 GPIO LEDs"
603 depends on LEDS_CLASS
604 depends on MACH_KIRKWOOD || MACH_ARMADA_370 || COMPILE_TEST
607 This option enables support for the dual-GPIO LEDs found on the
608 following LaCie/Seagate boards:
610 Network Space v2 (and parents: Max, Mini)
613 n090401 (Seagate NAS 4-Bay)
616 tristate "LED support for Big Network series LEDs"
617 depends on LEDS_CLASS
618 depends on MACH_KIRKWOOD || COMPILE_TEST
622 This option enables support for LEDs found on the LaCie 2Big
623 and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
624 controlled through a GPIO extension bus.
627 tristate "LED Support for TCA6507 I2C chip"
628 depends on LEDS_CLASS && I2C
630 This option enables support for LEDs connected to TC6507
631 LED driver chips accessed via the I2C bus.
632 Driver support brightness control and hardware-assisted blinking.
635 tristate "LED driver for TLC59108 and TLC59116 controllers"
636 depends on LEDS_CLASS && I2C
639 This option enables support for Texas Instruments TLC59108
640 and TLC59116 LED controllers.
643 tristate "LED support for Maxim MAX77650 PMIC"
644 depends on LEDS_CLASS && MFD_MAX77650
646 LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
649 tristate "LED support for MAX8997 PMIC"
650 depends on LEDS_CLASS && MFD_MAX8997
652 This option enables support for on-chip LED drivers on
656 tristate "LED support for LM3554 and LM3556 chips"
657 depends on LEDS_CLASS && I2C
660 This option enables support for LEDs connected to LM3554
661 and LM3556. It includes Torch, Flash and Indicator functions.
664 tristate "LED support for the Bachmann OT200"
665 depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
667 This option enables support for the LEDs on the Bachmann OT200.
668 Say Y to enable LEDs on the Bachmann OT200.
670 config LEDS_MENF21BMC
671 tristate "LED support for the MEN 14F021P00 BMC"
672 depends on LEDS_CLASS && MFD_MENF21BMC
674 Say Y here to include support for the MEN 14F021P00 BMC LEDs.
676 This driver can also be built as a module. If so the module
677 will be called leds-menf21bmc.
679 config LEDS_IS31FL319X
680 tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
681 depends on LEDS_CLASS && I2C
684 This option enables support for LEDs connected to ISSI IS31FL319x
685 fancy LED driver chips accessed via the I2C bus.
686 Driver supports individual PWM brightness control for each channel.
688 This driver can also be built as a module. If so the module will be
689 called leds-is31fl319x.
691 config LEDS_IS31FL32XX
692 tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
693 depends on LEDS_CLASS && I2C && OF
695 Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
696 LED controllers. They are I2C devices with multiple constant-current
697 channels, each with independent 256-level PWM control.
699 config LEDS_SC27XX_BLTC
700 tristate "LED support for the SC27xx breathing light controller"
701 depends on LEDS_CLASS && MFD_SC27XX_PMIC
704 Say Y here to include support for the SC27xx breathing light controller
707 This driver can also be built as a module. If so the module will be
708 called leds-sc27xx-bltc.
710 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
713 tristate "LED support for the BlinkM I2C RGB LED"
714 depends on LEDS_CLASS
717 This option enables support for the BlinkM RGB LED connected
718 through I2C. Say Y to enable support for the BlinkM LED.
721 tristate "LED support for PowerNV Platform"
722 depends on LEDS_CLASS
723 depends on PPC_POWERNV
726 This option enables support for the system LEDs present on
727 PowerNV platforms. Say 'y' to enable this support in kernel.
728 To compile this driver as a module, choose 'm' here: the module
729 will be called leds-powernv.
732 bool "LED support for LEDs on system controllers"
733 depends on LEDS_CLASS=y
734 depends on MFD_SYSCON
737 This option enables support for the LEDs on syscon type
738 devices. This will only work with device tree enabled
742 tristate "LED Support for the Qualcomm PM8058 PMIC"
743 depends on MFD_PM8XXX
744 depends on LEDS_CLASS
746 Choose this option if you want to use the LED drivers in
747 the Qualcomm PM8058 PMIC.
750 tristate "LED support for the Mellanox boards"
751 depends on X86 && DMI
752 depends on LEDS_CLASS
754 This option enables support for the LEDs on the Mellanox
755 boards. Say Y to enable these.
758 tristate "LED support for the Mellanox switches management control"
759 depends on LEDS_CLASS
761 This option enables support for the LEDs on the Mellanox Ethernet and
762 InfiniBand switches. The driver can be activated by the platform device
763 device add call. Say Y to enable these. To compile this driver as a
764 module, choose 'M' here: the module will be called leds-mlxreg.
767 tristate "Userspace LED support"
768 depends on LEDS_CLASS
770 This option enables support for userspace LEDs. Say 'y' to enable this
771 support in kernel. To compile this driver as a module, choose 'm' here:
772 the module will be called uleds.
775 tristate "LED support for NI PXI NIC78bx devices"
776 depends on LEDS_CLASS
777 depends on X86 && ACPI
779 This option enables support for the User1 and User2 LEDs on NI
782 To compile this driver as a module, choose M here: the module
783 will be called leds-nic78bx.
786 tristate "LED support for SPI LED controller with a single byte"
787 depends on LEDS_CLASS
791 This option enables support for LED controller which use a single byte
792 for controlling the brightness. Currently the following controller is
793 supported: Ubiquiti airCube ISP microcontroller based LED controller.
795 config LEDS_TI_LMU_COMMON
796 tristate "LED driver for TI LMU"
797 depends on LEDS_CLASS
800 Say Y to enable the LED driver for TI LMU devices.
801 This supports common features between the TI LM3532, LM3631, LM3632,
802 LM3633, LM3695 and LM3697.
805 tristate "LED driver for LM3697"
806 depends on LEDS_TI_LMU_COMMON
809 Say Y to enable the LM3697 LED driver for TI LMU devices.
810 This supports the LED device LM3697.
813 tristate "LED driver for LM36274"
814 depends on LEDS_TI_LMU_COMMON
815 depends on MFD_TI_LMU
817 Say Y to enable the LM36274 LED driver for TI LMU devices.
818 This supports the LED device LM36274.
821 tristate "LED support for TI TPS6105X"
822 depends on LEDS_CLASS
824 default y if TPS6105X
826 This driver supports TPS61050/TPS61052 LED chips.
827 It is a single boost converter primarily for white LEDs and
831 tristate "LED support for SGI Octane machines"
832 depends on LEDS_CLASS
833 depends on SGI_MFD_IOC3 || COMPILE_TEST
835 This option enables support for the Red and White LEDs of
838 To compile this driver as a module, choose M here: the module
839 will be called leds-ip30.
841 config LEDS_ACER_A500
842 tristate "Power button LED support for Acer Iconia Tab A500"
843 depends on LEDS_CLASS && MFD_ACER_A500_EC
845 This option enables support for the Power Button LED of
846 Acer Iconia Tab A500.
848 source "drivers/leds/blink/Kconfig"
850 comment "Flash and Torch LED drivers"
851 source "drivers/leds/flash/Kconfig"
853 comment "RGB LED drivers"
854 source "drivers/leds/rgb/Kconfig"
856 comment "LED Triggers"
857 source "drivers/leds/trigger/Kconfig"
859 comment "Simple LED drivers"
860 source "drivers/leds/simple/Kconfig"