1 # SPDX-License-Identifier: GPL-2.0-only
6 tristate "HiSax SiemensChipSet driver support"
9 This is a driver supporting the Siemens chipset on various
10 ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
11 S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
14 HiSax is just the name of this driver, not the name of any hardware.
16 If you have a card with such a chipset, you should say Y here and
17 also to the configuration option of the driver for your particular
22 comment "D-channel protocol features"
25 bool "HiSax Support for EURO/DSS1"
27 Say Y or N according to the D-channel protocol which your local
28 telephone service company provides.
30 The call control protocol E-DSS1 is used in most European countries.
34 bool "Support for german chargeinfo"
37 If you want that the HiSax hardware driver sends messages to the
38 upper level of the isdn code on each AOCD (Advice Of Charge, During
39 the call -- transmission of the fee information during a call) and
40 on each AOCE (Advice Of Charge, at the End of the call --
41 transmission of fee information at the end of the call), say Y here.
42 This works only in Germany.
44 config HISAX_NO_SENDCOMPLETE
45 bool "Disable sending complete"
48 If you have trouble with some ugly exchanges or you live in
49 Australia select this option.
52 bool "Disable sending low layer compatibility"
55 If you have trouble with some ugly exchanges try to select this
58 config HISAX_NO_KEYPAD
59 bool "Disable keypad protocol option"
62 If you like to send special dial strings including * or # without
63 using the keypad protocol, select this option.
66 bool "HiSax Support for german 1TR6"
68 Say Y or N according to the D-channel protocol which your local
69 telephone service company provides.
71 1TR6 is an old call control protocol which was used in Germany
72 before E-DSS1 was established. Nowadays, all new lines in Germany
76 bool "HiSax Support for US NI1"
78 Enable this if you like to use ISDN in US on a NI1 basic rate
81 config HISAX_MAX_CARDS
82 int "Maximum number of cards supported by HiSax"
85 This option allows you to specify the maximum number of cards which
86 the HiSax driver will be able to handle.
88 comment "HiSax supported cards"
94 This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
97 See <file:Documentation/isdn/README.HiSax> on how to configure it
98 using the different cards, a different D-channel protocol, or
99 non-standard IRQ/port/shmem settings.
102 bool "Teles 16.3 or PNP or PCMCIA"
104 This enables HiSax support for the Teles ISDN-cards S0-16.3 the
105 Teles/Creatix PnP and the Teles PCMCIA.
107 See <file:Documentation/isdn/README.HiSax> on how to configure it
108 using the different cards, a different D-channel protocol, or
109 non-standard IRQ/port settings.
111 config HISAX_TELESPCI
113 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
115 This enables HiSax support for the Teles PCI.
116 See <file:Documentation/isdn/README.HiSax> on how to configure it.
121 This enables HiSax support for the Teles/Creatix parallel port
122 S0BOX. See <file:Documentation/isdn/README.HiSax> on how to
126 bool "AVM A1 (Fritz)"
129 This enables HiSax support for the AVM A1 (aka "Fritz").
131 See <file:Documentation/isdn/README.HiSax> on how to configure it
132 using the different cards, a different D-channel protocol, or
133 non-standard IRQ/port settings.
135 config HISAX_FRITZPCI
136 bool "AVM PnP/PCI (Fritz!PnP/PCI)"
137 depends on BROKEN || !PPC64
139 This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
140 See <file:Documentation/isdn/README.HiSax> on how to configure it.
142 config HISAX_AVM_A1_PCMCIA
143 bool "AVM A1 PCMCIA (Fritz)"
145 This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
146 See <file:Documentation/isdn/README.HiSax> on how to configure it.
151 This enables HiSax support for the Elsa Mircolink ISA cards, for the
152 Elsa Quickstep series cards and Elsa PCMCIA.
154 See <file:Documentation/isdn/README.HiSax> on how to configure it
155 using the different cards, a different D-channel protocol, or
156 non-standard IRQ/port settings.
158 config HISAX_IX1MICROR2
159 bool "ITK ix1-micro Revision 2"
162 This enables HiSax support for the ITK ix1-micro Revision 2 card.
164 See <file:Documentation/isdn/README.HiSax> on how to configure it
165 using the different cards, a different D-channel protocol, or
166 non-standard IRQ/port settings.
168 config HISAX_DIEHLDIVA
169 bool "Eicon.Diehl Diva cards"
171 This enables HiSax support for the Eicon.Diehl Diva none PRO
172 versions passive ISDN cards.
174 See <file:Documentation/isdn/README.HiSax> on how to configure it
175 using the different cards, a different D-channel protocol, or
176 non-standard IRQ/port settings.
179 bool "ASUSCOM ISA cards"
182 This enables HiSax support for the AsusCom and their OEM versions
183 passive ISDN ISA cards.
185 See <file:Documentation/isdn/README.HiSax> on how to configure it
186 using the different cards, a different D-channel protocol, or
187 non-standard IRQ/port settings.
193 This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
195 See <file:Documentation/isdn/README.HiSax> on how to configure it
196 using the different cards, a different D-channel protocol, or
197 non-standard IRQ/port settings.
200 bool "HFC-S based cards"
203 This enables HiSax support for the HFC-S 2BDS0 based cards, like
206 See <file:Documentation/isdn/README.HiSax> on how to configure it
207 using the different cards, a different D-channel protocol, or
208 non-standard IRQ/port settings.
210 config HISAX_SEDLBAUER
211 bool "Sedlbauer cards"
213 This enables HiSax support for the Sedlbauer passive ISDN cards.
215 See <file:Documentation/isdn/README.HiSax> on how to configure it
216 using the different cards, a different D-channel protocol, or
217 non-standard IRQ/port settings.
219 config HISAX_SPORTSTER
220 bool "USR Sportster internal TA"
223 This enables HiSax support for the USR Sportster internal TA card.
225 See <file:Documentation/isdn/README.HiSax> on how to configure it
226 using a different D-channel protocol, or non-standard IRQ/port
233 This enables HiSax support for the ITH MIC card.
235 See <file:Documentation/isdn/README.HiSax> on how to configure it
236 using a different D-channel protocol, or non-standard IRQ/port
241 depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
242 depends on VIRT_TO_BUS
244 This enables HiSax support for the NetJet from Traverse
247 See <file:Documentation/isdn/README.HiSax> on how to configure it
248 using a different D-channel protocol, or non-standard IRQ/port
251 config HISAX_NETJET_U
252 bool "NETspider U card"
253 depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
254 depends on VIRT_TO_BUS
256 This enables HiSax support for the Netspider U interface ISDN card
257 from Traverse Technologies.
258 See <file:Documentation/isdn/README.HiSax> on how to configure it
259 using a different D-channel protocol, or non-standard IRQ/port
263 bool "Niccy PnP/PCI card"
265 This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
267 See <file:Documentation/isdn/README.HiSax> on how to configure it
268 using a different D-channel protocol, or non-standard IRQ/port
272 bool "Siemens I-Surf card"
275 This enables HiSax support for the Siemens I-Talk/I-Surf card with
277 See <file:Documentation/isdn/README.HiSax> on how to configure it
278 using a different D-channel protocol, or non-standard IRQ/port
281 config HISAX_HSTSAPHIR
282 bool "HST Saphir card"
285 This enables HiSax support for the HST Saphir card.
287 See <file:Documentation/isdn/README.HiSax> on how to configure it
288 using a different D-channel protocol, or non-standard IRQ/port
292 bool "Telekom A4T card"
295 This enables HiSax support for the Telekom A4T card.
297 See <file:Documentation/isdn/README.HiSax> on how to configure it
298 using a different D-channel protocol, or non-standard IRQ/port
301 config HISAX_SCT_QUADRO
302 bool "Scitel Quadro card"
305 This enables HiSax support for the Scitel Quadro card.
307 See <file:Documentation/isdn/README.HiSax> on how to configure it
308 using a different D-channel protocol, or non-standard IRQ/port
314 This enables HiSax support for the Gazel cards.
316 See <file:Documentation/isdn/README.HiSax> on how to configure it
317 using a different D-channel protocol, or non-standard IRQ/port
321 bool "HFC PCI-Bus cards"
322 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
324 This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
326 For more information see under
327 <file:Documentation/isdn/README.hfc-pci>.
330 bool "Winbond W6692 based cards"
333 This enables HiSax support for Winbond W6692 based PCI ISDN cards.
335 See <file:Documentation/isdn/README.HiSax> on how to configure it
336 using a different D-channel protocol, or non-standard IRQ/port
340 bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
342 This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
343 cards. This code is not finished yet.
345 config HISAX_ENTERNOW_PCI
346 bool "Formula-n enter:now PCI card"
347 depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
349 This enables HiSax support for the Formula-n enter:now PCI
353 bool "HiSax debugging"
355 This enables debugging code in the new-style HiSax drivers, i.e.
356 the ST5481 USB driver currently.
357 If in doubt, say yes.
359 comment "HiSax PCMCIA card service modules"
361 config HISAX_SEDLBAUER_CS
362 tristate "Sedlbauer PCMCIA cards"
363 depends on PCMCIA && HISAX_SEDLBAUER
365 This enables the PCMCIA client driver for the Sedlbauer Speed Star
366 and Speed Star II cards.
369 tristate "ELSA PCMCIA MicroLink cards"
370 depends on PCMCIA && HISAX_ELSA
372 This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
375 config HISAX_AVM_A1_CS
376 tristate "AVM A1 PCMCIA cards"
377 depends on PCMCIA && ISDN_DRV_HISAX
379 This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
382 config HISAX_TELES_CS
383 tristate "TELES PCMCIA cards"
384 depends on PCMCIA && HISAX_16_3
386 This enables the PCMCIA client driver for the Teles PCMCIA cards.
388 comment "HiSax sub driver modules"
391 tristate "ST5481 USB ISDN modem"
397 This enables the driver for ST5481 based USB ISDN adapters,
398 e.g. the BeWan Gazel 128 USB
401 tristate "HFC USB based ISDN modems"
404 This enables the driver for HFC USB based ISDN modems.
407 tristate "HFC-4S/8S based ISDN cards"
409 This enables the driver for HFC-4S/8S based ISDN cards.
411 config HISAX_FRITZ_PCIPNP
412 tristate "AVM Fritz!Card PCI/PCIv2/PnP support"
415 This enables the driver for the AVM Fritz!Card PCI,
416 Fritz!Card PCI v2 and Fritz!Card PnP.
417 (the latter also needs you to select "ISA Plug and Play support"
418 from the menu "Plug and Play configuration")