KVM: SVM: Rename vmplX_ssp -> plX_ssp
[linux-2.6-block.git] / drivers / iommu / Kconfig
1 # SPDX-License-Identifier: GPL-2.0-only
2 # The IOVA library may also be used by non-IOMMU_API users
3 config IOMMU_IOVA
4         tristate
5
6 # IOMMU_API always gets selected by whoever wants it.
7 config IOMMU_API
8         bool
9
10 config IOMMUFD_DRIVER
11         bool
12         default n
13
14 menuconfig IOMMU_SUPPORT
15         bool "IOMMU Hardware Support"
16         depends on MMU
17         default y
18         help
19           Say Y here if you want to compile device drivers for IO Memory
20           Management Units into the kernel. These devices usually allow to
21           remap DMA requests and/or remap interrupts from other devices on the
22           system.
23
24 if IOMMU_SUPPORT
25
26 menu "Generic IOMMU Pagetable Support"
27
28 # Selected by the actual pagetable implementations
29 config IOMMU_IO_PGTABLE
30         bool
31
32 config IOMMU_IO_PGTABLE_LPAE
33         bool "ARMv7/v8 Long Descriptor Format"
34         select IOMMU_IO_PGTABLE
35         depends on ARM || ARM64 || COMPILE_TEST
36         depends on !GENERIC_ATOMIC64    # for cmpxchg64()
37         help
38           Enable support for the ARM long descriptor pagetable format.
39           This allocator supports 4K/2M/1G, 16K/32M and 64K/512M page
40           sizes at both stage-1 and stage-2, as well as address spaces
41           up to 48-bits in size.
42
43 config IOMMU_IO_PGTABLE_LPAE_SELFTEST
44         bool "LPAE selftests"
45         depends on IOMMU_IO_PGTABLE_LPAE
46         help
47           Enable self-tests for LPAE page table allocator. This performs
48           a series of page-table consistency checks during boot.
49
50           If unsure, say N here.
51
52 config IOMMU_IO_PGTABLE_ARMV7S
53         bool "ARMv7/v8 Short Descriptor Format"
54         select IOMMU_IO_PGTABLE
55         depends on ARM || ARM64 || COMPILE_TEST
56         help
57           Enable support for the ARM Short-descriptor pagetable format.
58           This supports 32-bit virtual and physical addresses mapped using
59           2-level tables with 4KB pages/1MB sections, and contiguous entries
60           for 64KB pages/16MB supersections if indicated by the IOMMU driver.
61
62 config IOMMU_IO_PGTABLE_ARMV7S_SELFTEST
63         bool "ARMv7s selftests"
64         depends on IOMMU_IO_PGTABLE_ARMV7S
65         help
66           Enable self-tests for ARMv7s page table allocator. This performs
67           a series of page-table consistency checks during boot.
68
69           If unsure, say N here.
70
71 config IOMMU_IO_PGTABLE_DART
72         bool "Apple DART Formats"
73         select IOMMU_IO_PGTABLE
74         depends on ARM64 || COMPILE_TEST
75         depends on !GENERIC_ATOMIC64    # for cmpxchg64()
76         help
77           Enable support for the Apple DART pagetable formats. These include
78           the t8020 and t6000/t8110 DART formats used in Apple M1/M2 family
79           SoCs.
80
81           If unsure, say N here.
82
83 endmenu
84
85 config IOMMU_DEBUGFS
86         bool "Export IOMMU internals in DebugFS"
87         depends on DEBUG_FS
88         help
89           Allows exposure of IOMMU device internals. This option enables
90           the use of debugfs by IOMMU drivers as required. Devices can,
91           at initialization time, cause the IOMMU code to create a top-level
92           debug/iommu directory, and then populate a subdirectory with
93           entries as required.
94
95 choice
96         prompt "IOMMU default domain type"
97         depends on IOMMU_API
98         default IOMMU_DEFAULT_DMA_LAZY if X86 || S390
99         default IOMMU_DEFAULT_DMA_STRICT
100         help
101           Choose the type of IOMMU domain used to manage DMA API usage by
102           device drivers. The options here typically represent different
103           levels of tradeoff between robustness/security and performance,
104           depending on the IOMMU driver. Not all IOMMUs support all options.
105           This choice can be overridden at boot via the command line, and for
106           some devices also at runtime via sysfs.
107
108           If unsure, keep the default.
109
110 config IOMMU_DEFAULT_DMA_STRICT
111         bool "Translated - Strict"
112         help
113           Trusted devices use translation to restrict their access to only
114           DMA-mapped pages, with strict TLB invalidation on unmap. Equivalent
115           to passing "iommu.passthrough=0 iommu.strict=1" on the command line.
116
117           Untrusted devices always use this mode, with an additional layer of
118           bounce-buffering such that they cannot gain access to any unrelated
119           data within a mapped page.
120
121 config IOMMU_DEFAULT_DMA_LAZY
122         bool "Translated - Lazy"
123         help
124           Trusted devices use translation to restrict their access to only
125           DMA-mapped pages, but with "lazy" batched TLB invalidation. This
126           mode allows higher performance with some IOMMUs due to reduced TLB
127           flushing, but at the cost of reduced isolation since devices may be
128           able to access memory for some time after it has been unmapped.
129           Equivalent to passing "iommu.passthrough=0 iommu.strict=0" on the
130           command line.
131
132           If this mode is not supported by the IOMMU driver, the effective
133           runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT.
134
135 config IOMMU_DEFAULT_PASSTHROUGH
136         bool "Passthrough"
137         help
138           Trusted devices are identity-mapped, giving them unrestricted access
139           to memory with minimal performance overhead. Equivalent to passing
140           "iommu.passthrough=1" (historically "iommu=pt") on the command line.
141
142           If this mode is not supported by the IOMMU driver, the effective
143           runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT.
144
145 endchoice
146
147 config OF_IOMMU
148         def_bool y
149         depends on OF && IOMMU_API
150
151 # IOMMU-agnostic DMA-mapping layer
152 config IOMMU_DMA
153         def_bool ARM64 || X86 || S390
154         select DMA_OPS
155         select IOMMU_API
156         select IOMMU_IOVA
157         select IRQ_MSI_IOMMU
158         select NEED_SG_DMA_LENGTH
159         select NEED_SG_DMA_FLAGS if SWIOTLB
160
161 # Shared Virtual Addressing
162 config IOMMU_SVA
163         select IOMMU_MM_DATA
164         bool
165
166 config FSL_PAMU
167         bool "Freescale IOMMU support"
168         depends on PCI
169         depends on PHYS_64BIT
170         depends on PPC_E500MC || (COMPILE_TEST && PPC)
171         select IOMMU_API
172         select GENERIC_ALLOCATOR
173         help
174           Freescale PAMU support. PAMU is the IOMMU present on Freescale QorIQ platforms.
175           PAMU can authorize memory access, remap the memory address, and remap I/O
176           transaction types.
177
178 # MSM IOMMU support
179 config MSM_IOMMU
180         bool "MSM IOMMU Support"
181         depends on ARM
182         depends on ARCH_MSM8X60 || ARCH_MSM8960 || COMPILE_TEST
183         select IOMMU_API
184         select IOMMU_IO_PGTABLE_ARMV7S
185         help
186           Support for the IOMMUs found on certain Qualcomm SOCs.
187           These IOMMUs allow virtualization of the address space used by most
188           cores within the multimedia subsystem.
189
190           If unsure, say N here.
191
192 source "drivers/iommu/amd/Kconfig"
193 source "drivers/iommu/intel/Kconfig"
194 source "drivers/iommu/iommufd/Kconfig"
195
196 config IRQ_REMAP
197         bool "Support for Interrupt Remapping"
198         depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
199         select DMAR_TABLE
200         help
201           Supports Interrupt remapping for IO-APIC and MSI devices.
202           To use x2apic mode in the CPU's which support x2APIC enhancements or
203           to support platforms with CPU's having > 8 bit APIC ID, say Y.
204
205 # OMAP IOMMU support
206 config OMAP_IOMMU
207         bool "OMAP IOMMU Support"
208         depends on ARCH_OMAP2PLUS || COMPILE_TEST
209         select IOMMU_API
210         help
211           The OMAP3 media platform drivers depend on iommu support,
212           if you need them say Y here.
213
214 config OMAP_IOMMU_DEBUG
215         bool "Export OMAP IOMMU internals in DebugFS"
216         depends on OMAP_IOMMU && DEBUG_FS
217         help
218           Select this to see extensive information about
219           the internal state of OMAP IOMMU in debugfs.
220
221           Say N unless you know you need this.
222
223 config ROCKCHIP_IOMMU
224         bool "Rockchip IOMMU Support"
225         depends on ARCH_ROCKCHIP || COMPILE_TEST
226         select IOMMU_API
227         select ARM_DMA_USE_IOMMU
228         help
229           Support for IOMMUs found on Rockchip rk32xx SOCs.
230           These IOMMUs allow virtualization of the address space used by most
231           cores within the multimedia subsystem.
232           Say Y here if you are using a Rockchip SoC that includes an IOMMU
233           device.
234
235 config SUN50I_IOMMU
236         bool "Allwinner H6 IOMMU Support"
237         depends on HAS_DMA
238         depends on ARCH_SUNXI || COMPILE_TEST
239         select ARM_DMA_USE_IOMMU
240         select IOMMU_API
241         help
242           Support for the IOMMU introduced in the Allwinner H6 SoCs.
243
244 config TEGRA_IOMMU_SMMU
245         bool "NVIDIA Tegra SMMU Support"
246         depends on ARCH_TEGRA
247         depends on TEGRA_AHB
248         depends on TEGRA_MC
249         select IOMMU_API
250         help
251           This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
252           SoCs (Tegra30 up to Tegra210).
253
254 config EXYNOS_IOMMU
255         bool "Exynos IOMMU Support"
256         depends on ARCH_EXYNOS || COMPILE_TEST
257         depends on !CPU_BIG_ENDIAN # revisit driver if we can enable big-endian ptes
258         select IOMMU_API
259         select ARM_DMA_USE_IOMMU
260         help
261           Support for the IOMMU (System MMU) of Samsung Exynos application
262           processor family. This enables H/W multimedia accelerators to see
263           non-linear physical memory chunks as linear memory in their
264           address space.
265
266           If unsure, say N here.
267
268 config EXYNOS_IOMMU_DEBUG
269         bool "Debugging log for Exynos IOMMU"
270         depends on EXYNOS_IOMMU
271         help
272           Select this to see the detailed log message that shows what
273           happens in the IOMMU driver.
274
275           Say N unless you need kernel log message for IOMMU debugging.
276
277 config IPMMU_VMSA
278         bool "Renesas VMSA-compatible IPMMU"
279         depends on ARCH_RENESAS || COMPILE_TEST
280         depends on ARM || ARM64 || COMPILE_TEST
281         depends on !GENERIC_ATOMIC64    # for IOMMU_IO_PGTABLE_LPAE
282         select IOMMU_API
283         select IOMMU_IO_PGTABLE_LPAE
284         select ARM_DMA_USE_IOMMU
285         help
286           Support for the Renesas VMSA-compatible IPMMU found in the R-Mobile
287           APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs.
288
289           If unsure, say N.
290
291 config SPAPR_TCE_IOMMU
292         bool "sPAPR TCE IOMMU Support"
293         depends on PPC_POWERNV || PPC_PSERIES
294         select IOMMU_API
295         help
296           Enables bits of IOMMU API required by VFIO. The iommu_ops
297           is not implemented as it is not necessary for VFIO.
298
299 config APPLE_DART
300         tristate "Apple DART IOMMU Support"
301         depends on ARCH_APPLE || COMPILE_TEST
302         depends on !GENERIC_ATOMIC64    # for IOMMU_IO_PGTABLE_DART
303         select IOMMU_API
304         select IOMMU_IO_PGTABLE_DART
305         default ARCH_APPLE
306         help
307           Support for Apple DART (Device Address Resolution Table) IOMMUs
308           found in Apple ARM SoCs like the M1.
309           This IOMMU is required for most peripherals using DMA to access
310           the main memory.
311
312           Say Y here if you are using an Apple SoC.
313
314 # ARM IOMMU support
315 config ARM_SMMU
316         tristate "ARM Ltd. System MMU (SMMU) Support"
317         depends on ARM64 || ARM || COMPILE_TEST
318         depends on !GENERIC_ATOMIC64    # for IOMMU_IO_PGTABLE_LPAE
319         select IOMMU_API
320         select IOMMU_IO_PGTABLE_LPAE
321         select ARM_DMA_USE_IOMMU if ARM
322         help
323           Support for implementations of the ARM System MMU architecture
324           versions 1 and 2.
325
326           Say Y here if your SoC includes an IOMMU device implementing
327           the ARM SMMU architecture.
328
329 config ARM_SMMU_LEGACY_DT_BINDINGS
330         bool "Support the legacy \"mmu-masters\" devicetree bindings"
331         depends on ARM_SMMU=y && OF
332         help
333           Support for the badly designed and deprecated "mmu-masters"
334           devicetree bindings. This allows some DMA masters to attach
335           to the SMMU but does not provide any support via the DMA API.
336           If you're lucky, you might be able to get VFIO up and running.
337
338           If you say Y here then you'll make me very sad. Instead, say N
339           and move your firmware to the utopian future that was 2016.
340
341 config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT
342         bool "Default to disabling bypass on ARM SMMU v1 and v2"
343         depends on ARM_SMMU
344         default y
345         help
346           Say Y here to (by default) disable bypass streams such that
347           incoming transactions from devices that are not attached to
348           an iommu domain will report an abort back to the device and
349           will not be allowed to pass through the SMMU.
350
351           Any old kernels that existed before this KConfig was
352           introduced would default to _allowing_ bypass (AKA the
353           equivalent of NO for this config).  However the default for
354           this option is YES because the old behavior is insecure.
355
356           There are few reasons to allow unmatched stream bypass, and
357           even fewer good ones.  If saying YES here breaks your board
358           you should work on fixing your board.  This KConfig option
359           is expected to be removed in the future and we'll simply
360           hardcode the bypass disable in the code.
361
362           NOTE: the kernel command line parameter
363           'arm-smmu.disable_bypass' will continue to override this
364           config.
365
366 config ARM_SMMU_QCOM
367         def_tristate y
368         depends on ARM_SMMU && ARCH_QCOM
369         select QCOM_SCM
370         help
371           When running on a Qualcomm platform that has the custom variant
372           of the ARM SMMU, this needs to be built into the SMMU driver.
373
374 config ARM_SMMU_QCOM_DEBUG
375         bool "ARM SMMU QCOM implementation defined debug support"
376         depends on ARM_SMMU_QCOM
377         help
378           Support for implementation specific debug features in ARM SMMU
379           hardware found in QTI platforms.
380
381           Say Y here to enable debug for issues such as TLB sync timeouts
382           which requires implementation defined register dumps.
383
384 config ARM_SMMU_V3
385         tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
386         depends on ARM64
387         select IOMMU_API
388         select IOMMU_IO_PGTABLE_LPAE
389         select GENERIC_MSI_IRQ
390         help
391           Support for implementations of the ARM System MMU architecture
392           version 3 providing translation support to a PCIe root complex.
393
394           Say Y here if your system includes an IOMMU device implementing
395           the ARM SMMUv3 architecture.
396
397 config ARM_SMMU_V3_SVA
398         bool "Shared Virtual Addressing support for the ARM SMMUv3"
399         depends on ARM_SMMU_V3
400         select IOMMU_SVA
401         select MMU_NOTIFIER
402         help
403           Support for sharing process address spaces with devices using the
404           SMMUv3.
405
406           Say Y here if your system supports SVA extensions such as PCIe PASID
407           and PRI.
408
409 config S390_IOMMU
410         def_bool y if S390 && PCI
411         depends on S390 && PCI
412         select IOMMU_API
413         help
414           Support for the IOMMU API for s390 PCI devices.
415
416 config MTK_IOMMU
417         tristate "MediaTek IOMMU Support"
418         depends on ARCH_MEDIATEK || COMPILE_TEST
419         select ARM_DMA_USE_IOMMU
420         select IOMMU_API
421         select IOMMU_IO_PGTABLE_ARMV7S
422         select MEMORY
423         select MTK_SMI
424         help
425           Support for the M4U on certain Mediatek SOCs. M4U is MultiMedia
426           Memory Management Unit. This option enables remapping of DMA memory
427           accesses for the multimedia subsystem.
428
429           If unsure, say N here.
430
431 config MTK_IOMMU_V1
432         tristate "MediaTek IOMMU Version 1 (M4U gen1) Support"
433         depends on ARM
434         depends on ARCH_MEDIATEK || COMPILE_TEST
435         select ARM_DMA_USE_IOMMU
436         select IOMMU_API
437         select MEMORY
438         select MTK_SMI
439         help
440           Support for the M4U on certain Mediatek SoCs. M4U generation 1 HW is
441           Multimedia Memory Managememt Unit. This option enables remapping of
442           DMA memory accesses for the multimedia subsystem.
443
444           if unsure, say N here.
445
446 config QCOM_IOMMU
447         # Note: iommu drivers cannot (yet?) be built as modules
448         bool "Qualcomm IOMMU Support"
449         depends on ARCH_QCOM || COMPILE_TEST
450         depends on !GENERIC_ATOMIC64    # for IOMMU_IO_PGTABLE_LPAE
451         select QCOM_SCM
452         select IOMMU_API
453         select IOMMU_IO_PGTABLE_LPAE
454         select ARM_DMA_USE_IOMMU
455         help
456           Support for IOMMU on certain Qualcomm SoCs.
457
458 config HYPERV_IOMMU
459         bool "Hyper-V IRQ Handling"
460         depends on HYPERV && X86
461         select IOMMU_API
462         default HYPERV
463         help
464           Stub IOMMU driver to handle IRQs to support Hyper-V Linux
465           guest and root partitions.
466
467 config VIRTIO_IOMMU
468         tristate "Virtio IOMMU driver"
469         depends on VIRTIO
470         depends on (ARM64 || X86)
471         select IOMMU_API
472         select INTERVAL_TREE
473         select ACPI_VIOT if ACPI
474         help
475           Para-virtualised IOMMU driver with virtio.
476
477           Say Y here if you intend to run this kernel as a guest.
478
479 config SPRD_IOMMU
480         tristate "Unisoc IOMMU Support"
481         depends on ARCH_SPRD || COMPILE_TEST
482         select IOMMU_API
483         help
484           Support for IOMMU on Unisoc's SoCs, this IOMMU can be used by
485           Unisoc's multimedia devices, such as display, Image codec(jpeg)
486           and a few signal processors, including VSP(video), GSP(graphic),
487           ISP(image), and CPP(camera pixel processor), etc.
488
489           Say Y here if you want to use the multimedia devices listed above.
490
491 endif # IOMMU_SUPPORT