2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
78 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
80 To compile this driver as a module, choose M here: the
81 module will be called ad7879-i2c.
83 config TOUCHSCREEN_AD7879_SPI
84 tristate "support SPI bus connection"
85 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
88 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
90 If unsure, say N (but it's safe to say "Y").
92 To compile this driver as a module, choose M here: the
93 module will be called ad7879-spi.
95 config TOUCHSCREEN_AR1021_I2C
96 tristate "Microchip AR1020/1021 i2c touchscreen"
99 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
100 controller chip in your system.
104 To compile this driver as a module, choose M here: the
105 module will be called ar1021_i2c.
107 config TOUCHSCREEN_ATMEL_MXT
108 tristate "Atmel mXT I2C Touchscreen"
112 Say Y here if you have Atmel mXT series I2C touchscreen,
113 such as AT42QT602240/ATMXT224, connected to your system.
117 To compile this driver as a module, choose M here: the
118 module will be called atmel_mxt_ts.
120 config TOUCHSCREEN_ATMEL_MXT_T37
121 bool "Support T37 Diagnostic Data"
122 depends on TOUCHSCREEN_ATMEL_MXT
123 depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
124 select VIDEOBUF2_VMALLOC
126 Say Y here if you want support to output data from the T37
127 Diagnostic Data object using a V4L device.
129 config TOUCHSCREEN_AUO_PIXCIR
130 tristate "AUO in-cell touchscreen using Pixcir ICs"
132 depends on GPIOLIB || COMPILE_TEST
134 Say Y here if you have a AUO display with in-cell touchscreen
139 To compile this driver as a module, choose M here: the
140 module will be called auo-pixcir-ts.
142 config TOUCHSCREEN_BU21013
143 tristate "BU21013 based touch panel controllers"
146 Say Y here if you have a bu21013 touchscreen connected to
151 To compile this driver as a module, choose M here: the
152 module will be called bu21013_ts.
154 config TOUCHSCREEN_CHIPONE_ICN8318
155 tristate "chipone icn8318 touchscreen controller"
156 depends on GPIOLIB || COMPILE_TEST
160 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
164 To compile this driver as a module, choose M here: the
165 module will be called chipone_icn8318.
167 config TOUCHSCREEN_CHIPONE_ICN8505
168 tristate "chipone icn8505 touchscreen controller"
169 depends on I2C && ACPI
171 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
175 To compile this driver as a module, choose M here: the
176 module will be called chipone_icn8505.
178 config TOUCHSCREEN_CY8CTMG110
179 tristate "cy8ctmg110 touchscreen"
181 depends on GPIOLIB || COMPILE_TEST
183 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
188 To compile this driver as a module, choose M here: the
189 module will be called cy8ctmg110_ts.
191 config TOUCHSCREEN_CYTTSP_CORE
192 tristate "Cypress TTSP touchscreen"
194 Say Y here if you have a touchscreen using controller from
195 the Cypress TrueTouch(tm) Standard Product family connected
196 to your system. You will also need to select appropriate
197 bus connection below.
201 To compile this driver as a module, choose M here: the
202 module will be called cyttsp_core.
204 config TOUCHSCREEN_CYTTSP_I2C
205 tristate "support I2C bus connection"
206 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
208 Say Y here if the touchscreen is connected via I2C bus.
210 To compile this driver as a module, choose M here: the
211 module will be called cyttsp_i2c.
213 config TOUCHSCREEN_CYTTSP_SPI
214 tristate "support SPI bus connection"
215 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
217 Say Y here if the touchscreen is connected via SPI bus.
219 To compile this driver as a module, choose M here: the
220 module will be called cyttsp_spi.
222 config TOUCHSCREEN_CYTTSP4_CORE
223 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
225 Core driver for Cypress TrueTouch(tm) Standard Product
226 Generation4 touchscreen controllers.
228 Say Y here if you have a Cypress Gen4 touchscreen.
232 To compile this driver as a module, choose M here.
234 config TOUCHSCREEN_CYTTSP4_I2C
235 tristate "support I2C bus connection"
236 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
238 Say Y here if the touchscreen is connected via I2C bus.
240 To compile this driver as a module, choose M here: the
241 module will be called cyttsp4_i2c.
243 config TOUCHSCREEN_CYTTSP4_SPI
244 tristate "support SPI bus connection"
245 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
247 Say Y here if the touchscreen is connected via SPI bus.
249 To compile this driver as a module, choose M here: the
250 module will be called cyttsp4_spi.
252 config TOUCHSCREEN_DA9034
253 tristate "Touchscreen support for Dialog Semiconductor DA9034"
254 depends on PMIC_DA903X
257 Say Y here to enable the support for the touchscreen found
258 on Dialog Semiconductor DA9034 PMIC.
262 To compile this driver as a module, choose M here: the
263 module will be called da9034-ts.
265 config TOUCHSCREEN_DA9052
266 tristate "Dialog DA9052/DA9053 TSI"
267 depends on PMIC_DA9052
269 Say Y here to support the touchscreen found on Dialog Semiconductor
270 DA9052-BC and DA9053-AA/Bx PMICs.
274 To compile this driver as a module, choose M here: the
275 module will be called da9052_tsi.
277 config TOUCHSCREEN_DYNAPRO
278 tristate "Dynapro serial touchscreen"
281 Say Y here if you have a Dynapro serial touchscreen connected to
286 To compile this driver as a module, choose M here: the
287 module will be called dynapro.
289 config TOUCHSCREEN_HAMPSHIRE
290 tristate "Hampshire serial touchscreen"
293 Say Y here if you have a Hampshire serial touchscreen connected to
298 To compile this driver as a module, choose M here: the
299 module will be called hampshire.
301 config TOUCHSCREEN_EETI
302 tristate "EETI touchscreen panel support"
305 Say Y here to enable support for I2C connected EETI touch panels.
307 To compile this driver as a module, choose M here: the
308 module will be called eeti_ts.
310 config TOUCHSCREEN_EGALAX
311 tristate "EETI eGalax multi-touch panel support"
314 Say Y here to enable support for I2C connected EETI
315 eGalax multi-touch panels.
317 To compile this driver as a module, choose M here: the
318 module will be called egalax_ts.
320 config TOUCHSCREEN_EGALAX_SERIAL
321 tristate "EETI eGalax serial touchscreen"
324 Say Y here to enable support for serial connected EETI
327 To compile this driver as a module, choose M here: the
328 module will be called egalax_ts_serial.
330 config TOUCHSCREEN_EXC3000
331 tristate "EETI EXC3000 multi-touch panel support"
334 Say Y here to enable support for I2C connected EETI
335 EXC3000 multi-touch panels.
337 To compile this driver as a module, choose M here: the
338 module will be called exc3000.
340 config TOUCHSCREEN_FUJITSU
341 tristate "Fujitsu serial touchscreen"
344 Say Y here if you have the Fujitsu touchscreen (such as one
345 installed in Lifebook P series laptop) connected to your
350 To compile this driver as a module, choose M here: the
351 module will be called fujitsu-ts.
353 config TOUCHSCREEN_GOODIX
354 tristate "Goodix I2C touchscreen"
356 depends on GPIOLIB || COMPILE_TEST
358 Say Y here if you have the Goodix touchscreen (such as one
359 installed in Onda v975w tablets) connected to your
360 system. It also supports 5-finger chip models, which can be
361 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
365 To compile this driver as a module, choose M here: the
366 module will be called goodix.
368 config TOUCHSCREEN_HIDEEP
369 tristate "HiDeep Touch IC"
372 Say Y here if you have a touchscreen using HiDeep.
376 To compile this driver as a module, choose M here : the
377 module will be called hideep_ts.
379 config TOUCHSCREEN_ILI210X
380 tristate "Ilitek ILI210X based touchscreen"
383 Say Y here if you have a ILI210X based touchscreen
384 controller. This driver supports models ILI2102,
385 ILI2102s, ILI2103, ILI2103s and ILI2105.
386 Such kind of chipsets can be found in Amazon Kindle Fire
391 To compile this driver as a module, choose M here: the
392 module will be called ili210x.
394 config TOUCHSCREEN_IPROC
395 tristate "IPROC touch panel driver support"
396 depends on ARCH_BCM_IPROC || COMPILE_TEST
398 Say Y here if you want to add support for the IPROC touch
399 controller to your system.
403 To compile this driver as a module, choose M here: the
404 module will be called bcm_iproc_tsc.
406 config TOUCHSCREEN_S3C2410
407 tristate "Samsung S3C2410/generic touchscreen input driver"
408 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
411 Say Y here if you have the s3c2410 touchscreen.
415 To compile this driver as a module, choose M here: the
416 module will be called s3c2410_ts.
418 config TOUCHSCREEN_S6SY761
419 tristate "Samsung S6SY761 Touchscreen driver"
422 Say Y if you have the Samsung S6SY761 driver
426 To compile this driver as module, choose M here: the
427 module will be called s6sy761.
429 config TOUCHSCREEN_GUNZE
430 tristate "Gunze AHL-51S touchscreen"
433 Say Y here if you have the Gunze AHL-51 touchscreen connected to
438 To compile this driver as a module, choose M here: the
439 module will be called gunze.
441 config TOUCHSCREEN_EKTF2127
442 tristate "Elan eKTF2127 I2C touchscreen"
445 Say Y here if you have an Elan eKTF2127 touchscreen
446 connected to your system.
450 To compile this driver as a module, choose M here: the
451 module will be called ektf2127.
453 config TOUCHSCREEN_ELAN
454 tristate "Elan eKTH I2C touchscreen"
457 Say Y here if you have an Elan eKTH I2C touchscreen
458 connected to your system.
462 To compile this driver as a module, choose M here: the
463 module will be called elants_i2c.
465 config TOUCHSCREEN_ELO
466 tristate "Elo serial touchscreens"
469 Say Y here if you have an Elo serial touchscreen connected to
474 To compile this driver as a module, choose M here: the
475 module will be called elo.
477 config TOUCHSCREEN_WACOM_W8001
478 tristate "Wacom W8001 penabled serial touchscreen"
481 Say Y here if you have an Wacom W8001 penabled serial touchscreen
482 connected to your system.
486 To compile this driver as a module, choose M here: the
487 module will be called wacom_w8001.
489 config TOUCHSCREEN_WACOM_I2C
490 tristate "Wacom Tablet support (I2C)"
493 Say Y here if you want to use the I2C version of the Wacom
498 To compile this driver as a module, choose M here: the module
499 will be called wacom_i2c.
501 config TOUCHSCREEN_LPC32XX
502 tristate "LPC32XX touchscreen controller"
503 depends on ARCH_LPC32XX
505 Say Y here if you have a LPC32XX device and want
506 to support the built-in touchscreen.
508 To compile this driver as a module, choose M here: the
509 module will be called lpc32xx_ts.
511 config TOUCHSCREEN_MAX11801
512 tristate "MAX11801 based touchscreens"
515 Say Y here if you have a MAX11801 based touchscreen
520 To compile this driver as a module, choose M here: the
521 module will be called max11801_ts.
523 config TOUCHSCREEN_MCS5000
524 tristate "MELFAS MCS-5000 touchscreen"
527 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
532 To compile this driver as a module, choose M here: the
533 module will be called mcs5000_ts.
535 config TOUCHSCREEN_MMS114
536 tristate "MELFAS MMS114 touchscreen"
539 Say Y here if you have the MELFAS MMS114 touchscreen controller
544 To compile this driver as a module, choose M here: the
545 module will be called mms114.
547 config TOUCHSCREEN_MELFAS_MIP4
548 tristate "MELFAS MIP4 Touchscreen"
551 Say Y here if you have a MELFAS MIP4 Touchscreen device.
555 To compile this driver as a module, choose M here:
556 the module will be called melfas_mip4.
558 config TOUCHSCREEN_MTOUCH
559 tristate "MicroTouch serial touchscreens"
562 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
567 To compile this driver as a module, choose M here: the
568 module will be called mtouch.
570 config TOUCHSCREEN_IMX6UL_TSC
571 tristate "Freescale i.MX6UL touchscreen controller"
572 depends on (OF && GPIOLIB) || COMPILE_TEST
574 Say Y here if you have a Freescale i.MX6UL, and want to
575 use the internal touchscreen controller.
579 To compile this driver as a module, choose M here: the
580 module will be called imx6ul_tsc.
582 config TOUCHSCREEN_INEXIO
583 tristate "iNexio serial touchscreens"
586 Say Y here if you have an iNexio serial touchscreen connected to
591 To compile this driver as a module, choose M here: the
592 module will be called inexio.
594 config TOUCHSCREEN_MK712
595 tristate "ICS MicroClock MK712 touchscreen"
597 Say Y here if you have the ICS MicroClock MK712 touchscreen
598 controller chip in your system.
602 To compile this driver as a module, choose M here: the
603 module will be called mk712.
605 config TOUCHSCREEN_HP600
606 tristate "HP Jornada 6xx touchscreen"
607 depends on SH_HP6XX && SH_ADC
609 Say Y here if you have a HP Jornada 620/660/680/690 and want to
610 support the built-in touchscreen.
612 To compile this driver as a module, choose M here: the
613 module will be called hp680_ts_input.
615 config TOUCHSCREEN_HP7XX
616 tristate "HP Jornada 7xx touchscreen"
617 depends on SA1100_JORNADA720_SSP
619 Say Y here if you have a HP Jornada 710/720/728 and want
620 to support the built-in touchscreen.
622 To compile this driver as a module, choose M here: the
623 module will be called jornada720_ts.
625 config TOUCHSCREEN_IPAQ_MICRO
626 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
627 depends on MFD_IPAQ_MICRO
629 Say Y here to enable support for the touchscreen attached to
630 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
634 To compile this driver as a module, choose M here: the
635 module will be called ipaq-micro-ts.
637 config TOUCHSCREEN_HTCPEN
638 tristate "HTC Shift X9500 touchscreen"
641 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
642 Clio / Shangrila and want to support the built-in touchscreen.
646 To compile this driver as a module, choose M here: the
647 module will be called htcpen.
649 config TOUCHSCREEN_PENMOUNT
650 tristate "Penmount serial touchscreen"
653 Say Y here if you have a Penmount serial touchscreen connected to
658 To compile this driver as a module, choose M here: the
659 module will be called penmount.
661 config TOUCHSCREEN_EDT_FT5X06
662 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
665 Say Y here if you have an EDT "Polytouch" touchscreen based
666 on the FocalTech FT5x06 family of controllers connected to
671 To compile this driver as a module, choose M here: the
672 module will be called edt-ft5x06.
674 config TOUCHSCREEN_MIGOR
675 tristate "Renesas MIGO-R touchscreen"
676 depends on (SH_MIGOR || COMPILE_TEST) && I2C
678 Say Y here to enable MIGO-R touchscreen support.
682 To compile this driver as a module, choose M here: the
683 module will be called migor_ts.
685 config TOUCHSCREEN_TOUCHRIGHT
686 tristate "Touchright serial touchscreen"
689 Say Y here if you have a Touchright serial touchscreen connected to
694 To compile this driver as a module, choose M here: the
695 module will be called touchright.
697 config TOUCHSCREEN_TOUCHWIN
698 tristate "Touchwin serial touchscreen"
701 Say Y here if you have a Touchwin serial touchscreen connected to
706 To compile this driver as a module, choose M here: the
707 module will be called touchwin.
709 config TOUCHSCREEN_TI_AM335X_TSC
710 tristate "TI Touchscreen Interface"
711 depends on MFD_TI_AM335X_TSCADC
713 Say Y here if you have 4/5/8 wire touchscreen controller
714 to be connected to the ADC controller on your TI AM335x SoC.
718 To compile this driver as a module, choose M here: the
719 module will be called ti_am335x_tsc.
721 config TOUCHSCREEN_UCB1400
722 tristate "Philips UCB1400 touchscreen"
724 depends on UCB1400_CORE
726 This enables support for the Philips UCB1400 touchscreen interface.
727 The UCB1400 is an AC97 audio codec. The touchscreen interface
728 will be initialized only after the ALSA subsystem has been
729 brought up and the UCB1400 detected. You therefore have to
730 configure ALSA support as well (either built-in or modular,
731 independently of whether this driver is itself built-in or
732 modular) for this driver to work.
734 To compile this driver as a module, choose M here: the
735 module will be called ucb1400_ts.
737 config TOUCHSCREEN_PIXCIR
738 tristate "PIXCIR I2C touchscreens"
741 Say Y here if you have a pixcir i2c touchscreen
746 To compile this driver as a module, choose M here: the
747 module will be called pixcir_i2c_ts.
749 config TOUCHSCREEN_WDT87XX_I2C
750 tristate "Weida HiTech I2C touchscreen"
753 Say Y here if you have a Weida WDT87XX I2C touchscreen
754 connected to your system.
758 To compile this driver as a module, choose M here: the
759 module will be called wdt87xx_i2c.
761 config TOUCHSCREEN_WM831X
762 tristate "Support for WM831x touchscreen controllers"
763 depends on MFD_WM831X
765 This enables support for the touchscreen controller on the WM831x
768 To compile this driver as a module, choose M here: the
769 module will be called wm831x-ts.
771 config TOUCHSCREEN_WM97XX
772 tristate "Support for WM97xx AC97 touchscreen controllers"
773 depends on AC97_BUS || AC97_BUS_NEW
775 Say Y here if you have a Wolfson Microelectronics WM97xx
776 touchscreen connected to your system. Note that this option
777 only enables core driver, you will also need to select
778 support for appropriate chip below.
782 To compile this driver as a module, choose M here: the
783 module will be called wm97xx-ts.
785 config TOUCHSCREEN_WM9705
786 bool "WM9705 Touchscreen interface support"
787 depends on TOUCHSCREEN_WM97XX
790 Say Y here to enable support for the Wolfson Microelectronics
791 WM9705 touchscreen controller.
793 config TOUCHSCREEN_WM9712
794 bool "WM9712 Touchscreen interface support"
795 depends on TOUCHSCREEN_WM97XX
798 Say Y here to enable support for the Wolfson Microelectronics
799 WM9712 touchscreen controller.
801 config TOUCHSCREEN_WM9713
802 bool "WM9713 Touchscreen interface support"
803 depends on TOUCHSCREEN_WM97XX
806 Say Y here to enable support for the Wolfson Microelectronics
807 WM9713 touchscreen controller.
809 config TOUCHSCREEN_WM97XX_MAINSTONE
810 tristate "WM97xx Mainstone/Palm accelerated touch"
811 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
813 Say Y here for support for streaming mode with WM97xx touchscreens
814 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
818 To compile this driver as a module, choose M here: the
819 module will be called mainstone-wm97xx.
821 config TOUCHSCREEN_WM97XX_ZYLONITE
822 tristate "Zylonite accelerated touch"
823 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
824 select TOUCHSCREEN_WM9713
826 Say Y here for support for streaming mode with the touchscreen
831 To compile this driver as a module, choose M here: the
832 module will be called zylonite-wm97xx.
834 config TOUCHSCREEN_USB_COMPOSITE
835 tristate "USB Touchscreen Driver"
836 depends on USB_ARCH_HAS_HCD
839 USB Touchscreen driver for:
840 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
841 - PanJit TouchSet USB
842 - 3M MicroTouch USB (EX II series)
844 - some other eTurboTouch
847 - IRTOUCHSYSTEMS/UNITOP
849 - GoTop Super_Q2/GogoPen/PenPower tablets
850 - JASTEC USB Touch Controller/DigiTech DTR-02U
851 - Zytronic controllers
852 - Elo TouchSystems 2700 IntelliTouch
853 - EasyTouch USB Touch Controller from Data Modul
854 - e2i (Mimo monitors)
856 Have a look at <http://linux.chapter7.ch/touchkit/> for
857 a usage description and the required user-space stuff.
859 To compile this driver as a module, choose M here: the
860 module will be called usbtouchscreen.
862 config TOUCHSCREEN_MXS_LRADC
863 tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
864 depends on MFD_MXS_LRADC
866 Say Y here if you have a touchscreen connected to the low-resolution
867 analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
869 To compile this driver as a module, choose M here: the module will be
872 config TOUCHSCREEN_MX25
873 tristate "Freescale i.MX25 touchscreen input driver"
874 depends on MFD_MX25_TSADC
876 Enable support for touchscreen connected to your i.MX25.
878 To compile this driver as a module, choose M here: the
879 module will be called fsl-imx25-tcq.
881 config TOUCHSCREEN_MC13783
882 tristate "Freescale MC13783 touchscreen input driver"
883 depends on MFD_MC13XXX
885 Say Y here if you have an Freescale MC13783 PMIC on your
886 board and want to use its touchscreen
890 To compile this driver as a module, choose M here: the
891 module will be called mc13783_ts.
893 config TOUCHSCREEN_USB_EGALAX
895 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
896 depends on TOUCHSCREEN_USB_COMPOSITE
898 config TOUCHSCREEN_USB_PANJIT
900 bool "PanJit device support" if EXPERT
901 depends on TOUCHSCREEN_USB_COMPOSITE
903 config TOUCHSCREEN_USB_3M
905 bool "3M/Microtouch EX II series device support" if EXPERT
906 depends on TOUCHSCREEN_USB_COMPOSITE
908 config TOUCHSCREEN_USB_ITM
910 bool "ITM device support" if EXPERT
911 depends on TOUCHSCREEN_USB_COMPOSITE
913 config TOUCHSCREEN_USB_ETURBO
915 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
916 depends on TOUCHSCREEN_USB_COMPOSITE
918 config TOUCHSCREEN_USB_GUNZE
920 bool "Gunze AHL61 device support" if EXPERT
921 depends on TOUCHSCREEN_USB_COMPOSITE
923 config TOUCHSCREEN_USB_DMC_TSC10
925 bool "DMC TSC-10/25 device support" if EXPERT
926 depends on TOUCHSCREEN_USB_COMPOSITE
928 config TOUCHSCREEN_USB_IRTOUCH
930 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
931 depends on TOUCHSCREEN_USB_COMPOSITE
933 config TOUCHSCREEN_USB_IDEALTEK
935 bool "IdealTEK URTC1000 device support" if EXPERT
936 depends on TOUCHSCREEN_USB_COMPOSITE
938 config TOUCHSCREEN_USB_GENERAL_TOUCH
940 bool "GeneralTouch Touchscreen device support" if EXPERT
941 depends on TOUCHSCREEN_USB_COMPOSITE
943 config TOUCHSCREEN_USB_GOTOP
945 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
946 depends on TOUCHSCREEN_USB_COMPOSITE
948 config TOUCHSCREEN_USB_JASTEC
950 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
951 depends on TOUCHSCREEN_USB_COMPOSITE
953 config TOUCHSCREEN_USB_ELO
955 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
956 depends on TOUCHSCREEN_USB_COMPOSITE
958 config TOUCHSCREEN_USB_E2I
960 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
961 depends on TOUCHSCREEN_USB_COMPOSITE
963 config TOUCHSCREEN_USB_ZYTRONIC
965 bool "Zytronic controller" if EXPERT
966 depends on TOUCHSCREEN_USB_COMPOSITE
968 config TOUCHSCREEN_USB_ETT_TC45USB
970 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
971 depends on TOUCHSCREEN_USB_COMPOSITE
973 config TOUCHSCREEN_USB_NEXIO
975 bool "NEXIO/iNexio device support" if EXPERT
976 depends on TOUCHSCREEN_USB_COMPOSITE
978 config TOUCHSCREEN_USB_EASYTOUCH
980 bool "EasyTouch USB Touch controller device support" if EXPERT
981 depends on TOUCHSCREEN_USB_COMPOSITE
983 Say Y here if you have an EasyTouch USB Touch controller.
986 config TOUCHSCREEN_TOUCHIT213
987 tristate "Sahara TouchIT-213 touchscreen"
990 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
994 To compile this driver as a module, choose M here: the
995 module will be called touchit213.
997 config TOUCHSCREEN_TS4800
998 tristate "TS-4800 touchscreen"
999 depends on HAS_IOMEM && OF
1000 depends on SOC_IMX51 || COMPILE_TEST
1002 select INPUT_POLLDEV
1004 Say Y here if you have a touchscreen on a TS-4800 board.
1006 On TS-4800, the touchscreen is not handled directly by Linux but by
1011 To compile this driver as a module, choose M here: the
1012 module will be called ts4800_ts.
1014 config TOUCHSCREEN_TSC_SERIO
1015 tristate "TSC-10/25/40 serial touchscreen support"
1018 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1023 To compile this driver as a module, choose M here: the
1024 module will be called tsc40.
1026 config TOUCHSCREEN_TSC200X_CORE
1029 config TOUCHSCREEN_TSC2004
1030 tristate "TSC2004 based touchscreens"
1033 select TOUCHSCREEN_TSC200X_CORE
1035 Say Y here if you have a TSC2004 based touchscreen.
1039 To compile this driver as a module, choose M here: the
1040 module will be called tsc2004.
1042 config TOUCHSCREEN_TSC2005
1043 tristate "TSC2005 based touchscreens"
1044 depends on SPI_MASTER
1046 select TOUCHSCREEN_TSC200X_CORE
1048 Say Y here if you have a TSC2005 based touchscreen.
1052 To compile this driver as a module, choose M here: the
1053 module will be called tsc2005.
1055 config TOUCHSCREEN_TSC2007
1056 tristate "TSC2007 based touchscreens"
1059 Say Y here if you have a TSC2007 based touchscreen.
1063 To compile this driver as a module, choose M here: the
1064 module will be called tsc2007.
1066 config TOUCHSCREEN_TSC2007_IIO
1067 bool "IIO interface for external ADC input and temperature"
1068 depends on TOUCHSCREEN_TSC2007
1069 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1071 Saying Y here adds an iio interface to the tsc2007 which
1072 provides values for the AUX input (used for e.g. battery
1073 or ambient light monitoring), temperature and raw input
1076 config TOUCHSCREEN_W90X900
1077 tristate "W90P910 touchscreen driver"
1078 depends on ARCH_W90X900
1080 Say Y here if you have a W90P910 based touchscreen.
1082 To compile this driver as a module, choose M here: the
1083 module will be called w90p910_ts.
1085 config TOUCHSCREEN_PCAP
1086 tristate "Motorola PCAP touchscreen"
1089 Say Y here if you have a Motorola EZX telephone and
1090 want to enable support for the built-in touchscreen.
1092 To compile this driver as a module, choose M here: the
1093 module will be called pcap_ts.
1095 config TOUCHSCREEN_RM_TS
1096 tristate "Raydium I2C Touchscreen"
1098 depends on GPIOLIB || COMPILE_TEST
1100 Say Y here if you have Raydium series I2C touchscreen,
1101 such as RM32380, connected to your system.
1105 To compile this driver as a module, choose M here: the
1106 module will be called raydium_i2c_ts.
1108 config TOUCHSCREEN_SILEAD
1109 tristate "Silead I2C touchscreen"
1112 Say Y here if you have the Silead touchscreen connected to
1117 To compile this driver as a module, choose M here: the
1118 module will be called silead.
1120 config TOUCHSCREEN_SIS_I2C
1121 tristate "SiS 9200 family I2C touchscreen"
1124 depends on GPIOLIB || COMPILE_TEST
1126 This enables support for SiS 9200 family over I2C based touchscreens.
1130 To compile this driver as a module, choose M here: the
1131 module will be called sis_i2c.
1133 config TOUCHSCREEN_ST1232
1134 tristate "Sitronix ST1232 touchscreen controllers"
1137 Say Y here if you want to support Sitronix ST1232
1138 touchscreen controller.
1142 To compile this driver as a module, choose M here: the
1143 module will be called st1232_ts.
1145 config TOUCHSCREEN_STMFTS
1146 tristate "STMicroelectronics STMFTS touchscreen"
1148 depends on LEDS_CLASS
1150 Say Y here if you want support for STMicroelectronics
1153 To compile this driver as a module, choose M here: the
1154 module will be called stmfts.
1156 config TOUCHSCREEN_STMPE
1157 tristate "STMicroelectronics STMPE touchscreens"
1158 depends on MFD_STMPE
1159 depends on (OF || COMPILE_TEST)
1161 Say Y here if you want support for STMicroelectronics
1162 STMPE touchscreen controllers.
1164 To compile this driver as a module, choose M here: the
1165 module will be called stmpe-ts.
1167 config TOUCHSCREEN_SUN4I
1168 tristate "Allwinner sun4i resistive touchscreen controller support"
1169 depends on ARCH_SUNXI || COMPILE_TEST
1171 depends on THERMAL || !THERMAL_OF
1173 This selects support for the resistive touchscreen controller
1174 found on Allwinner sunxi SoCs.
1176 To compile this driver as a module, choose M here: the
1177 module will be called sun4i-ts.
1179 config TOUCHSCREEN_SUR40
1180 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1181 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1182 depends on VIDEO_V4L2
1183 select INPUT_POLLDEV
1184 select VIDEOBUF2_DMA_SG
1186 Say Y here if you want support for the Samsung SUR40 touchscreen
1187 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1189 To compile this driver as a module, choose M here: the
1190 module will be called sur40.
1192 config TOUCHSCREEN_SURFACE3_SPI
1193 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1195 depends on GPIOLIB || COMPILE_TEST
1197 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1198 controller chip as found on the Surface 3 in your system.
1202 To compile this driver as a module, choose M here: the
1203 module will be called surface3_spi.
1205 config TOUCHSCREEN_SX8654
1206 tristate "Semtech SX8654 touchscreen"
1209 Say Y here if you have a Semtech SX8654 touchscreen controller.
1213 To compile this driver as a module, choose M here: the
1214 module will be called sx8654.
1216 config TOUCHSCREEN_TPS6507X
1217 tristate "TPS6507x based touchscreens"
1219 select INPUT_POLLDEV
1221 Say Y here if you have a TPS6507x based touchscreen
1226 To compile this driver as a module, choose M here: the
1227 module will be called tps6507x_ts.
1229 config TOUCHSCREEN_ZET6223
1230 tristate "Zeitec ZET6223 touchscreen driver"
1233 Say Y here if you have a touchscreen using Zeitec ZET6223
1237 To compile this driver as a module, choose M here: the
1238 module will be called zet6223.
1240 config TOUCHSCREEN_ZFORCE
1241 tristate "Neonode zForce infrared touchscreens"
1243 depends on GPIOLIB || COMPILE_TEST
1245 Say Y here if you have a touchscreen using the zforce
1246 infraread technology from Neonode.
1250 To compile this driver as a module, choose M here: the
1251 module will be called zforce_ts.
1253 config TOUCHSCREEN_COLIBRI_VF50
1254 tristate "Toradex Colibri on board touchscreen driver"
1255 depends on IIO && VF610_ADC
1256 depends on GPIOLIB || COMPILE_TEST
1258 Say Y here if you have a Colibri VF50 and plan to use
1259 the on-board provided 4-wire touchscreen driver.
1263 To compile this driver as a module, choose M here: the
1264 module will be called colibri_vf50_ts.
1266 config TOUCHSCREEN_ROHM_BU21023
1267 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1270 Say Y here if you have a touchscreen using ROHM BU21023/24.
1274 To compile this driver as a module, choose M here: the
1275 module will be called bu21023_ts.