drivers/input/rmi4/rmi_f11.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2011-2015 Synaptics Incorporated
   4  * Copyright (c) 2011 Unixphere
   5  */
   6
   7 #include <linux/kernel.h>
   8 #include <linux/delay.h>
   9 #include <linux/device.h>
  10 #include <linux/input.h>
  11 #include <linux/input/mt.h>
  12 #include <linux/rmi.h>
  13 #include <linux/slab.h>
  14 #include <linux/of.h>
  15 #include "rmi_driver.h"
  16 #include "rmi_2d_sensor.h"
  17
  18 #define F11_MAX_NUM_OF_FINGERS          10
  19 #define F11_MAX_NUM_OF_TOUCH_SHAPES     16
  20
  21 #define FINGER_STATE_MASK       0x03
  22
  23 #define F11_CTRL_SENSOR_MAX_X_POS_OFFSET        6
  24 #define F11_CTRL_SENSOR_MAX_Y_POS_OFFSET        8
  25
  26 #define DEFAULT_XY_MAX 9999
  27 #define DEFAULT_MAX_ABS_MT_PRESSURE 255
  28 #define DEFAULT_MAX_ABS_MT_TOUCH 15
  29 #define DEFAULT_MAX_ABS_MT_ORIENTATION 1
  30 #define DEFAULT_MIN_ABS_MT_TRACKING_ID 1
  31 #define DEFAULT_MAX_ABS_MT_TRACKING_ID 10
  32
  33 /** A note about RMI4 F11 register structure.
  34  *
  35  * The properties for
  36  * a given sensor are described by its query registers.  The number of query
  37  * registers and the layout of their contents are described by the F11 device
  38  * queries as well as the sensor query information.
  39  *
  40  * Similarly, each sensor has control registers that govern its behavior.  The
  41  * size and layout of the control registers for a given sensor can be determined
  42  * by parsing that sensors query registers.
  43  *
  44  * And in a likewise fashion, each sensor has data registers where it reports
  45  * its touch data and other interesting stuff.  The size and layout of a
  46  * sensors data registers must be determined by parsing its query registers.
  47  *
  48  * The short story is that we need to read and parse a lot of query
  49  * registers in order to determine the attributes of a sensor. Then
  50  * we need to use that data to compute the size of the control and data
  51  * registers for sensor.
  52  *
  53  * The end result is that we have a number of structs that aren't used to
  54  * directly generate the input events, but their size, location and contents
  55  * are critical to determining where the data we are interested in lives.
  56  *
  57  * At this time, the driver does not yet comprehend all possible F11
  58  * configuration options, but it should be sufficient to cover 99% of RMI4 F11
  59  * devices currently in the field.
  60  */
  61
  62 /* maximum ABS_MT_POSITION displacement (in mm) */
  63 #define DMAX 10
  64
  65 /**
  66  * @rezero - writing this to the F11 command register will cause the sensor to
  67  * calibrate to the current capacitive state.
  68  */
  69 #define RMI_F11_REZERO  0x01
  70
  71 #define RMI_F11_HAS_QUERY9              (1 << 3)
  72 #define RMI_F11_HAS_QUERY11             (1 << 4)
  73 #define RMI_F11_HAS_QUERY12             (1 << 5)
  74 #define RMI_F11_HAS_QUERY27             (1 << 6)
  75 #define RMI_F11_HAS_QUERY28             (1 << 7)
  76
  77 /** Defs for Query 1 */
  78
  79 #define RMI_F11_NR_FINGERS_MASK 0x07
  80 #define RMI_F11_HAS_REL                 (1 << 3)
  81 #define RMI_F11_HAS_ABS                 (1 << 4)
  82 #define RMI_F11_HAS_GESTURES            (1 << 5)
  83 #define RMI_F11_HAS_SENSITIVITY_ADJ     (1 << 6)
  84 #define RMI_F11_CONFIGURABLE            (1 << 7)
  85
  86 /** Defs for Query 2, 3, and 4. */
  87 #define RMI_F11_NR_ELECTRODES_MASK      0x7F
  88
  89 /** Defs for Query 5 */
  90
  91 #define RMI_F11_ABS_DATA_SIZE_MASK      0x03
  92 #define RMI_F11_HAS_ANCHORED_FINGER     (1 << 2)
  93 #define RMI_F11_HAS_ADJ_HYST            (1 << 3)
  94 #define RMI_F11_HAS_DRIBBLE             (1 << 4)
  95 #define RMI_F11_HAS_BENDING_CORRECTION  (1 << 5)
  96 #define RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION    (1 << 6)
  97 #define RMI_F11_HAS_JITTER_FILTER       (1 << 7)
  98
  99 /** Defs for Query 7 */
 100 #define RMI_F11_HAS_SINGLE_TAP                  (1 << 0)
 101 #define RMI_F11_HAS_TAP_AND_HOLD                (1 << 1)
 102 #define RMI_F11_HAS_DOUBLE_TAP                  (1 << 2)
 103 #define RMI_F11_HAS_EARLY_TAP                   (1 << 3)
 104 #define RMI_F11_HAS_FLICK                       (1 << 4)
 105 #define RMI_F11_HAS_PRESS                       (1 << 5)
 106 #define RMI_F11_HAS_PINCH                       (1 << 6)
 107 #define RMI_F11_HAS_CHIRAL                      (1 << 7)
 108
 109 /** Defs for Query 8 */
 110 #define RMI_F11_HAS_PALM_DET                    (1 << 0)
 111 #define RMI_F11_HAS_ROTATE                      (1 << 1)
 112 #define RMI_F11_HAS_TOUCH_SHAPES                (1 << 2)
 113 #define RMI_F11_HAS_SCROLL_ZONES                (1 << 3)
 114 #define RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES     (1 << 4)
 115 #define RMI_F11_HAS_MF_SCROLL                   (1 << 5)
 116 #define RMI_F11_HAS_MF_EDGE_MOTION              (1 << 6)
 117 #define RMI_F11_HAS_MF_SCROLL_INERTIA           (1 << 7)
 118
 119 /** Defs for Query 9. */
 120 #define RMI_F11_HAS_PEN                         (1 << 0)
 121 #define RMI_F11_HAS_PROXIMITY                   (1 << 1)
 122 #define RMI_F11_HAS_PALM_DET_SENSITIVITY        (1 << 2)
 123 #define RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT     (1 << 3)
 124 #define RMI_F11_HAS_TWO_PEN_THRESHOLDS          (1 << 4)
 125 #define RMI_F11_HAS_CONTACT_GEOMETRY            (1 << 5)
 126 #define RMI_F11_HAS_PEN_HOVER_DISCRIMINATION    (1 << 6)
 127 #define RMI_F11_HAS_PEN_FILTERS                 (1 << 7)
 128
 129 /** Defs for Query 10. */
 130 #define RMI_F11_NR_TOUCH_SHAPES_MASK            0x1F
 131
 132 /** Defs for Query 11 */
 133
 134 #define RMI_F11_HAS_Z_TUNING                    (1 << 0)
 135 #define RMI_F11_HAS_ALGORITHM_SELECTION         (1 << 1)
 136 #define RMI_F11_HAS_W_TUNING                    (1 << 2)
 137 #define RMI_F11_HAS_PITCH_INFO                  (1 << 3)
 138 #define RMI_F11_HAS_FINGER_SIZE                 (1 << 4)
 139 #define RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS (1 << 5)
 140 #define RMI_F11_HAS_XY_CLIP                     (1 << 6)
 141 #define RMI_F11_HAS_DRUMMING_FILTER             (1 << 7)
 142
 143 /** Defs for Query 12. */
 144
 145 #define RMI_F11_HAS_GAPLESS_FINGER              (1 << 0)
 146 #define RMI_F11_HAS_GAPLESS_FINGER_TUNING       (1 << 1)
 147 #define RMI_F11_HAS_8BIT_W                      (1 << 2)
 148 #define RMI_F11_HAS_ADJUSTABLE_MAPPING          (1 << 3)
 149 #define RMI_F11_HAS_INFO2                       (1 << 4)
 150 #define RMI_F11_HAS_PHYSICAL_PROPS              (1 << 5)
 151 #define RMI_F11_HAS_FINGER_LIMIT                (1 << 6)
 152 #define RMI_F11_HAS_LINEAR_COEFF                (1 << 7)
 153
 154 /** Defs for Query 13. */
 155
 156 #define RMI_F11_JITTER_WINDOW_MASK              0x1F
 157 #define RMI_F11_JITTER_FILTER_MASK              0x60
 158 #define RMI_F11_JITTER_FILTER_SHIFT             5
 159
 160 /** Defs for Query 14. */
 161 #define RMI_F11_LIGHT_CONTROL_MASK              0x03
 162 #define RMI_F11_IS_CLEAR                        (1 << 2)
 163 #define RMI_F11_CLICKPAD_PROPS_MASK             0x18
 164 #define RMI_F11_CLICKPAD_PROPS_SHIFT            3
 165 #define RMI_F11_MOUSE_BUTTONS_MASK              0x60
 166 #define RMI_F11_MOUSE_BUTTONS_SHIFT             5
 167 #define RMI_F11_HAS_ADVANCED_GESTURES           (1 << 7)
 168
 169 #define RMI_F11_QUERY_SIZE                      4
 170 #define RMI_F11_QUERY_GESTURE_SIZE              2
 171
 172 #define F11_LIGHT_CTL_NONE 0x00
 173 #define F11_LUXPAD         0x01
 174 #define F11_DUAL_MODE      0x02
 175
 176 #define F11_NOT_CLICKPAD     0x00
 177 #define F11_HINGED_CLICKPAD  0x01
 178 #define F11_UNIFORM_CLICKPAD 0x02
 179
 180 /**
 181  * Query registers 1 through 4 are always present.
 182  *
 183  * @nr_fingers - describes the maximum number of fingers the 2-D sensor
 184  * supports.
 185  * @has_rel - the sensor supports relative motion reporting.
 186  * @has_abs - the sensor supports absolute poition reporting.
 187  * @has_gestures - the sensor supports gesture reporting.
 188  * @has_sensitivity_adjust - the sensor supports a global sensitivity
 189  * adjustment.
 190  * @configurable - the sensor supports various configuration options.
 191  * @num_of_x_electrodes -  the maximum number of electrodes the 2-D sensor
 192  * supports on the X axis.
 193  * @num_of_y_electrodes -  the maximum number of electrodes the 2-D sensor
 194  * supports on the Y axis.
 195  * @max_electrodes - the total number of X and Y electrodes that may be
 196  * configured.
 197  *
 198  * Query 5 is present if the has_abs bit is set.
 199  *
 200  * @abs_data_size - describes the format of data reported by the absolute
 201  * data source.  Only one format (the kind used here) is supported at this
 202  * time.
 203  * @has_anchored_finger - then the sensor supports the high-precision second
 204  * finger tracking provided by the manual tracking and motion sensitivity
 205  * options.
 206  * @has_adjust_hyst - the difference between the finger release threshold and
 207  * the touch threshold.
 208  * @has_dribble - the sensor supports the generation of dribble interrupts,
 209  * which may be enabled or disabled with the dribble control bit.
 210  * @has_bending_correction - Bending related data registers 28 and 36, and
 211  * control register 52..57 are present.
 212  * @has_large_object_suppression - control register 58 and data register 28
 213  * exist.
 214  * @has_jitter_filter - query 13 and control 73..76 exist.
 215  *
 216  * Gesture information queries 7 and 8 are present if has_gestures bit is set.
 217  *
 218  * @has_single_tap - a basic single-tap gesture is supported.
 219  * @has_tap_n_hold - tap-and-hold gesture is supported.
 220  * @has_double_tap - double-tap gesture is supported.
 221  * @has_early_tap - early tap is supported and reported as soon as the finger
 222  * lifts for any tap event that could be interpreted as either a single tap
 223  * or as the first tap of a double-tap or tap-and-hold gesture.
 224  * @has_flick - flick detection is supported.
 225  * @has_press - press gesture reporting is supported.
 226  * @has_pinch - pinch gesture detection is supported.
 227  * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive
 228  * object such as a palm or a cheek touches the 2-D sensor.
 229  * @has_rotate - rotation gesture detection is supported.
 230  * @has_touch_shapes - TouchShapes are supported.  A TouchShape is a fixed
 231  * rectangular area on the sensor that behaves like a capacitive button.
 232  * @has_scroll_zones - scrolling areas near the sensor edges are supported.
 233  * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported;
 234  * if 0, then only two are supported.
 235  * @has_mf_scroll - the multifinger_scrolling bit will be set when
 236  * more than one finger is involved in a scrolling action.
 237  *
 238  * Convenience for checking bytes in the gesture info registers.  This is done
 239  * often enough that we put it here to declutter the conditionals
 240  *
 241  * @query7_nonzero - true if none of the query 7 bits are set
 242  * @query8_nonzero - true if none of the query 8 bits are set
 243  *
 244  * Query 9 is present if the has_query9 is set.
 245  *
 246  * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20
 247  * and F11_2D_Ctrl21 exist.
 248  * @has_proximity - detection of fingers near the sensor is supported and
 249  * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
 250  * @has_palm_det_sensitivity -  the sensor supports the palm detect sensitivity
 251  * feature and register F11_2D_Ctrl27 exists.
 252  * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists.
 253  * @has_contact_geometry - the sensor supports the use of contact geometry to
 254  * map absolute X and Y target positions and registers F11_2D_Data18
 255  * through F11_2D_Data27 exist.
 256  *
 257  * Touch shape info (query 10) is present if has_touch_shapes is set.
 258  *
 259  * @nr_touch_shapes - the total number of touch shapes supported.
 260  *
 261  * Query 11 is present if the has_query11 bit is set in query 0.
 262  *
 263  * @has_z_tuning - if set, the sensor supports Z tuning and registers
 264  * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
 265  * @has_algorithm_selection - controls choice of noise suppression algorithm
 266  * @has_w_tuning - the sensor supports Wx and Wy scaling and registers
 267  * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
 268  * @has_pitch_info - the X and Y pitches of the sensor electrodes can be
 269  * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
 270  * @has_finger_size -  the default finger width settings for the
 271  * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
 272  * exist.
 273  * @has_segmentation_aggressiveness - the sensor’s ability to distinguish
 274  * multiple objects close together can be configured and register F11_2D_Ctrl45
 275  * exists.
 276  * @has_XY_clip -  the inactive outside borders of the sensor can be
 277  * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
 278  * @has_drumming_filter - the sensor can be configured to distinguish
 279  * between a fast flick and a quick drumming movement and registers
 280  * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
 281  *
 282  * Query 12 is present if hasQuery12 bit is set.
 283  *
 284  * @has_gapless_finger - control registers relating to gapless finger are
 285  * present.
 286  * @has_gapless_finger_tuning - additional control and data registers relating
 287  * to gapless finger are present.
 288  * @has_8bit_w - larger W value reporting is supported.
 289  * @has_adjustable_mapping - TBD
 290  * @has_info2 - the general info query14 is present
 291  * @has_physical_props - additional queries describing the physical properties
 292  * of the sensor are present.
 293  * @has_finger_limit - indicates that F11 Ctrl 80 exists.
 294  * @has_linear_coeff - indicates that F11 Ctrl 81 exists.
 295  *
 296  * Query 13 is present if Query 5's has_jitter_filter bit is set.
 297  * @jitter_window_size - used by Design Studio 4.
 298  * @jitter_filter_type - used by Design Studio 4.
 299  *
 300  * Query 14 is present if query 12's has_general_info2 flag is set.
 301  *
 302  * @light_control - Indicates what light/led control features are present, if
 303  * any.
 304  * @is_clear - if set, this is a clear sensor (indicating direct pointing
 305  * application), otherwise it's opaque (indicating indirect pointing).
 306  * @clickpad_props - specifies if this is a clickpad, and if so what sort of
 307  * mechanism it uses
 308  * @mouse_buttons - specifies the number of mouse buttons present (if any).
 309  * @has_advanced_gestures - advanced driver gestures are supported.
 310  */
 311 struct f11_2d_sensor_queries {
 312         /* query1 */
 313         u8 nr_fingers;
 314         bool has_rel;
 315         bool has_abs;
 316         bool has_gestures;
 317         bool has_sensitivity_adjust;
 318         bool configurable;
 319
 320         /* query2 */
 321         u8 nr_x_electrodes;
 322
 323         /* query3 */
 324         u8 nr_y_electrodes;
 325
 326         /* query4 */
 327         u8 max_electrodes;
 328
 329         /* query5 */
 330         u8 abs_data_size;
 331         bool has_anchored_finger;
 332         bool has_adj_hyst;
 333         bool has_dribble;
 334         bool has_bending_correction;
 335         bool has_large_object_suppression;
 336         bool has_jitter_filter;
 337
 338         u8 f11_2d_query6;
 339
 340         /* query 7 */
 341         bool has_single_tap;
 342         bool has_tap_n_hold;
 343         bool has_double_tap;
 344         bool has_early_tap;
 345         bool has_flick;
 346         bool has_press;
 347         bool has_pinch;
 348         bool has_chiral;
 349
 350         bool query7_nonzero;
 351
 352         /* query 8 */
 353         bool has_palm_det;
 354         bool has_rotate;
 355         bool has_touch_shapes;
 356         bool has_scroll_zones;
 357         bool has_individual_scroll_zones;
 358         bool has_mf_scroll;
 359         bool has_mf_edge_motion;
 360         bool has_mf_scroll_inertia;
 361
 362         bool query8_nonzero;
 363
 364         /* Query 9 */
 365         bool has_pen;
 366         bool has_proximity;
 367         bool has_palm_det_sensitivity;
 368         bool has_suppress_on_palm_detect;
 369         bool has_two_pen_thresholds;
 370         bool has_contact_geometry;
 371         bool has_pen_hover_discrimination;
 372         bool has_pen_filters;
 373
 374         /* Query 10 */
 375         u8 nr_touch_shapes;
 376
 377         /* Query 11. */
 378         bool has_z_tuning;
 379         bool has_algorithm_selection;
 380         bool has_w_tuning;
 381         bool has_pitch_info;
 382         bool has_finger_size;
 383         bool has_segmentation_aggressiveness;
 384         bool has_XY_clip;
 385         bool has_drumming_filter;
 386
 387         /* Query 12 */
 388         bool has_gapless_finger;
 389         bool has_gapless_finger_tuning;
 390         bool has_8bit_w;
 391         bool has_adjustable_mapping;
 392         bool has_info2;
 393         bool has_physical_props;
 394         bool has_finger_limit;
 395         bool has_linear_coeff_2;
 396
 397         /* Query 13 */
 398         u8 jitter_window_size;
 399         u8 jitter_filter_type;
 400
 401         /* Query 14 */
 402         u8 light_control;
 403         bool is_clear;
 404         u8 clickpad_props;
 405         u8 mouse_buttons;
 406         bool has_advanced_gestures;
 407
 408         /* Query 15 - 18 */
 409         u16 x_sensor_size_mm;
 410         u16 y_sensor_size_mm;
 411 };
 412
 413 /* Defs for Ctrl0. */
 414 #define RMI_F11_REPORT_MODE_MASK        0x07
 415 #define RMI_F11_REPORT_MODE_CONTINUOUS  (0 << 0)
 416 #define RMI_F11_REPORT_MODE_REDUCED     (1 << 0)
 417 #define RMI_F11_REPORT_MODE_FS_CHANGE   (2 << 0)
 418 #define RMI_F11_REPORT_MODE_FP_CHANGE   (3 << 0)
 419 #define RMI_F11_ABS_POS_FILT            (1 << 3)
 420 #define RMI_F11_REL_POS_FILT            (1 << 4)
 421 #define RMI_F11_REL_BALLISTICS          (1 << 5)
 422 #define RMI_F11_DRIBBLE                 (1 << 6)
 423 #define RMI_F11_REPORT_BEYOND_CLIP      (1 << 7)
 424
 425 /* Defs for Ctrl1. */
 426 #define RMI_F11_PALM_DETECT_THRESH_MASK 0x0F
 427 #define RMI_F11_MOTION_SENSITIVITY_MASK 0x30
 428 #define RMI_F11_MANUAL_TRACKING         (1 << 6)
 429 #define RMI_F11_MANUAL_TRACKED_FINGER   (1 << 7)
 430
 431 #define RMI_F11_DELTA_X_THRESHOLD       2
 432 #define RMI_F11_DELTA_Y_THRESHOLD       3
 433
 434 #define RMI_F11_CTRL_REG_COUNT          12
 435
 436 struct f11_2d_ctrl {
 437         u8              ctrl0_11[RMI_F11_CTRL_REG_COUNT];
 438         u16             ctrl0_11_address;
 439 };
 440
 441 #define RMI_F11_ABS_BYTES 5
 442 #define RMI_F11_REL_BYTES 2
 443
 444 /* Defs for Data 8 */
 445
 446 #define RMI_F11_SINGLE_TAP              (1 << 0)
 447 #define RMI_F11_TAP_AND_HOLD            (1 << 1)
 448 #define RMI_F11_DOUBLE_TAP              (1 << 2)
 449 #define RMI_F11_EARLY_TAP               (1 << 3)
 450 #define RMI_F11_FLICK                   (1 << 4)
 451 #define RMI_F11_PRESS                   (1 << 5)
 452 #define RMI_F11_PINCH                   (1 << 6)
 453
 454 /* Defs for Data 9 */
 455
 456 #define RMI_F11_PALM_DETECT                     (1 << 0)
 457 #define RMI_F11_ROTATE                          (1 << 1)
 458 #define RMI_F11_SHAPE                           (1 << 2)
 459 #define RMI_F11_SCROLLZONE                      (1 << 3)
 460 #define RMI_F11_GESTURE_FINGER_COUNT_MASK       0x70
 461
 462 /** Handy pointers into our data buffer.
 463  *
 464  * @f_state - start of finger state registers.
 465  * @abs_pos - start of absolute position registers (if present).
 466  * @rel_pos - start of relative data registers (if present).
 467  * @gest_1  - gesture flags (if present).
 468  * @gest_2  - gesture flags & finger count (if present).
 469  * @pinch   - pinch motion register (if present).
 470  * @flick   - flick distance X & Y, flick time (if present).
 471  * @rotate  - rotate motion and finger separation.
 472  * @multi_scroll - chiral deltas for X and Y (if present).
 473  * @scroll_zones - scroll deltas for 4 regions (if present).
 474  */
 475 struct f11_2d_data {
 476         u8      *f_state;
 477         u8      *abs_pos;
 478         s8      *rel_pos;
 479         u8      *gest_1;
 480         u8      *gest_2;
 481         s8      *pinch;
 482         u8      *flick;
 483         u8      *rotate;
 484         u8      *shapes;
 485         s8      *multi_scroll;
 486         s8      *scroll_zones;
 487 };
 488
 489 /** Data pertaining to F11 in general.  For per-sensor data, see struct
 490  * f11_2d_sensor.
 491  *
 492  * @dev_query - F11 device specific query registers.
 493  * @dev_controls - F11 device specific control registers.
 494  * @dev_controls_mutex - lock for the control registers.
 495  * @rezero_wait_ms - if nonzero, upon resume we will wait this many
 496  * milliseconds before rezeroing the sensor(s).  This is useful in systems with
 497  * poor electrical behavior on resume, where the initial calibration of the
 498  * sensor(s) coming out of sleep state may be bogus.
 499  * @sensors - per sensor data structures.
 500  */
 501 struct f11_data {
 502         bool has_query9;
 503         bool has_query11;
 504         bool has_query12;
 505         bool has_query27;
 506         bool has_query28;
 507         bool has_acm;
 508         struct f11_2d_ctrl dev_controls;
 509         struct mutex dev_controls_mutex;
 510         u16 rezero_wait_ms;
 511         struct rmi_2d_sensor sensor;
 512         struct f11_2d_sensor_queries sens_query;
 513         struct f11_2d_data data;
 514         struct rmi_2d_sensor_platform_data sensor_pdata;
 515         unsigned long *abs_mask;
 516         unsigned long *rel_mask;
 517 };
 518
 519 enum f11_finger_state {
 520         F11_NO_FINGER   = 0x00,
 521         F11_PRESENT     = 0x01,
 522         F11_INACCURATE  = 0x02,
 523         F11_RESERVED    = 0x03
 524 };
 525
 526 static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger)
 527 {
 528         struct rmi_2d_sensor *sensor = &f11->sensor;
 529         struct f11_2d_data *data = &f11->data;
 530         s8 x, y;
 531
 532         x = data->rel_pos[n_finger * RMI_F11_REL_BYTES];
 533         y = data->rel_pos[n_finger * RMI_F11_REL_BYTES + 1];
 534
 535         rmi_2d_sensor_rel_report(sensor, x, y);
 536 }
 537
 538 static void rmi_f11_abs_pos_process(struct f11_data *f11,
 539                                    struct rmi_2d_sensor *sensor,
 540                                    struct rmi_2d_sensor_abs_object *obj,
 541                                    enum f11_finger_state finger_state,
 542                                    u8 n_finger)
 543 {
 544         struct f11_2d_data *data = &f11->data;
 545         u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES];
 546         int tool_type = MT_TOOL_FINGER;
 547
 548         switch (finger_state) {
 549         case F11_PRESENT:
 550                 obj->type = RMI_2D_OBJECT_FINGER;
 551                 break;
 552         default:
 553                 obj->type = RMI_2D_OBJECT_NONE;
 554         }
 555
 556         obj->mt_tool = tool_type;
 557         obj->x = (pos_data[0] << 4) | (pos_data[2] & 0x0F);
 558         obj->y = (pos_data[1] << 4) | (pos_data[2] >> 4);
 559         obj->z = pos_data[4];
 560         obj->wx = pos_data[3] & 0x0f;
 561         obj->wy = pos_data[3] >> 4;
 562
 563         rmi_2d_sensor_abs_process(sensor, obj, n_finger);
 564 }
 565
 566 static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
 567 {
 568         return (f_state[n_finger / 4] >> (2 * (n_finger % 4))) &
 569                                                         FINGER_STATE_MASK;
 570 }
 571
 572 static void rmi_f11_finger_handler(struct f11_data *f11,
 573                                    struct rmi_2d_sensor *sensor, int size)
 574 {
 575         const u8 *f_state = f11->data.f_state;
 576         u8 finger_state;
 577         u8 i;
 578         int abs_fingers;
 579         int rel_fingers;
 580         int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
 581
 582         if (sensor->report_abs) {
 583                 if (abs_size > size)
 584                         abs_fingers = size / RMI_F11_ABS_BYTES;
 585                 else
 586                         abs_fingers = sensor->nbr_fingers;
 587
 588                 for (i = 0; i < abs_fingers; i++) {
 589                         /* Possible of having 4 fingers per f_state register */
 590                         finger_state = rmi_f11_parse_finger_state(f_state, i);
 591                         if (finger_state == F11_RESERVED) {
 592                                 pr_err("Invalid finger state[%d]: 0x%02x", i,
 593                                         finger_state);
 594                                 continue;
 595                         }
 596
 597                         rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
 598                                                         finger_state, i);
 599                 }
 600
 601                 /*
 602                  * the absolute part is made in 2 parts to allow the kernel
 603                  * tracking to take place.
 604                  */
 605                 if (sensor->kernel_tracking)
 606                         input_mt_assign_slots(sensor->input,
 607                                               sensor->tracking_slots,
 608                                               sensor->tracking_pos,
 609                                               sensor->nbr_fingers,
 610                                               sensor->dmax);
 611
 612                 for (i = 0; i < abs_fingers; i++) {
 613                         finger_state = rmi_f11_parse_finger_state(f_state, i);
 614                         if (finger_state == F11_RESERVED)
 615                                 /* no need to send twice the error */
 616                                 continue;
 617
 618                         rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 619                 }
 620
 621                 input_mt_sync_frame(sensor->input);
 622         } else if (sensor->report_rel) {
 623                 if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
 624                         rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
 625                 else
 626                         rel_fingers = sensor->nbr_fingers;
 627
 628                 for (i = 0; i < rel_fingers; i++)
 629                         rmi_f11_rel_pos_report(f11, i);
 630         }
 631
 632 }
 633
 634 static int f11_2d_construct_data(struct f11_data *f11)
 635 {
 636         struct rmi_2d_sensor *sensor = &f11->sensor;
 637         struct f11_2d_sensor_queries *query = &f11->sens_query;
 638         struct f11_2d_data *data = &f11->data;
 639         int i;
 640
 641         sensor->nbr_fingers = (query->nr_fingers == 5 ? 10 :
 642                                 query->nr_fingers + 1);
 643
 644         sensor->pkt_size = DIV_ROUND_UP(sensor->nbr_fingers, 4);
 645
 646         if (query->has_abs) {
 647                 sensor->pkt_size += (sensor->nbr_fingers * 5);
 648                 sensor->attn_size = sensor->pkt_size;
 649         }
 650
 651         if (query->has_rel)
 652                 sensor->pkt_size +=  (sensor->nbr_fingers * 2);
 653
 654         /* Check if F11_2D_Query7 is non-zero */
 655         if (query->query7_nonzero)
 656                 sensor->pkt_size += sizeof(u8);
 657
 658         /* Check if F11_2D_Query7 or F11_2D_Query8 is non-zero */
 659         if (query->query7_nonzero || query->query8_nonzero)
 660                 sensor->pkt_size += sizeof(u8);
 661
 662         if (query->has_pinch || query->has_flick || query->has_rotate) {
 663                 sensor->pkt_size += 3;
 664                 if (!query->has_flick)
 665                         sensor->pkt_size--;
 666                 if (!query->has_rotate)
 667                         sensor->pkt_size--;
 668         }
 669
 670         if (query->has_touch_shapes)
 671                 sensor->pkt_size +=
 672                         DIV_ROUND_UP(query->nr_touch_shapes + 1, 8);
 673
 674         sensor->data_pkt = devm_kzalloc(&sensor->fn->dev, sensor->pkt_size,
 675                                         GFP_KERNEL);
 676         if (!sensor->data_pkt)
 677                 return -ENOMEM;
 678
 679         data->f_state = sensor->data_pkt;
 680         i = DIV_ROUND_UP(sensor->nbr_fingers, 4);
 681
 682         if (query->has_abs) {
 683                 data->abs_pos = &sensor->data_pkt[i];
 684                 i += (sensor->nbr_fingers * RMI_F11_ABS_BYTES);
 685         }
 686
 687         if (query->has_rel) {
 688                 data->rel_pos = &sensor->data_pkt[i];
 689                 i += (sensor->nbr_fingers * RMI_F11_REL_BYTES);
 690         }
 691
 692         if (query->query7_nonzero) {
 693                 data->gest_1 = &sensor->data_pkt[i];
 694                 i++;
 695         }
 696
 697         if (query->query7_nonzero || query->query8_nonzero) {
 698                 data->gest_2 = &sensor->data_pkt[i];
 699                 i++;
 700         }
 701
 702         if (query->has_pinch) {
 703                 data->pinch = &sensor->data_pkt[i];
 704                 i++;
 705         }
 706
 707         if (query->has_flick) {
 708                 if (query->has_pinch) {
 709                         data->flick = data->pinch;
 710                         i += 2;
 711                 } else {
 712                         data->flick = &sensor->data_pkt[i];
 713                         i += 3;
 714                 }
 715         }
 716
 717         if (query->has_rotate) {
 718                 if (query->has_flick) {
 719                         data->rotate = data->flick + 1;
 720                 } else {
 721                         data->rotate = &sensor->data_pkt[i];
 722                         i += 2;
 723                 }
 724         }
 725
 726         if (query->has_touch_shapes)
 727                 data->shapes = &sensor->data_pkt[i];
 728
 729         return 0;
 730 }
 731
 732 static int f11_read_control_regs(struct rmi_function *fn,
 733                                 struct f11_2d_ctrl *ctrl, u16 ctrl_base_addr) {
 734         struct rmi_device *rmi_dev = fn->rmi_dev;
 735         int error = 0;
 736
 737         ctrl->ctrl0_11_address = ctrl_base_addr;
 738         error = rmi_read_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
 739                                 RMI_F11_CTRL_REG_COUNT);
 740         if (error < 0) {
 741                 dev_err(&fn->dev, "Failed to read ctrl0, code: %d.\n", error);
 742                 return error;
 743         }
 744
 745         return 0;
 746 }
 747
 748 static int f11_write_control_regs(struct rmi_function *fn,
 749                                         struct f11_2d_sensor_queries *query,
 750                                         struct f11_2d_ctrl *ctrl,
 751                                         u16 ctrl_base_addr)
 752 {
 753         struct rmi_device *rmi_dev = fn->rmi_dev;
 754         int error;
 755
 756         error = rmi_write_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
 757                                 RMI_F11_CTRL_REG_COUNT);
 758         if (error < 0)
 759                 return error;
 760
 761         return 0;
 762 }
 763
 764 static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
 765                         struct f11_data *f11,
 766                         struct f11_2d_sensor_queries *sensor_query,
 767                         u16 query_base_addr)
 768 {
 769         int query_size;
 770         int rc;
 771         u8 query_buf[RMI_F11_QUERY_SIZE];
 772         bool has_query36 = false;
 773
 774         rc = rmi_read_block(rmi_dev, query_base_addr, query_buf,
 775                                 RMI_F11_QUERY_SIZE);
 776         if (rc < 0)
 777                 return rc;
 778
 779         sensor_query->nr_fingers = query_buf[0] & RMI_F11_NR_FINGERS_MASK;
 780         sensor_query->has_rel = !!(query_buf[0] & RMI_F11_HAS_REL);
 781         sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
 782         sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
 783         sensor_query->has_sensitivity_adjust =
 784                 !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
 785         sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
 786
 787         sensor_query->nr_x_electrodes =
 788                                 query_buf[1] & RMI_F11_NR_ELECTRODES_MASK;
 789         sensor_query->nr_y_electrodes =
 790                                 query_buf[2] & RMI_F11_NR_ELECTRODES_MASK;
 791         sensor_query->max_electrodes =
 792                                 query_buf[3] & RMI_F11_NR_ELECTRODES_MASK;
 793
 794         query_size = RMI_F11_QUERY_SIZE;
 795
 796         if (sensor_query->has_abs) {
 797                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 798                 if (rc < 0)
 799                         return rc;
 800
 801                 sensor_query->abs_data_size =
 802                         query_buf[0] & RMI_F11_ABS_DATA_SIZE_MASK;
 803                 sensor_query->has_anchored_finger =
 804                         !!(query_buf[0] & RMI_F11_HAS_ANCHORED_FINGER);
 805                 sensor_query->has_adj_hyst =
 806                         !!(query_buf[0] & RMI_F11_HAS_ADJ_HYST);
 807                 sensor_query->has_dribble =
 808                         !!(query_buf[0] & RMI_F11_HAS_DRIBBLE);
 809                 sensor_query->has_bending_correction =
 810                         !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
 811                 sensor_query->has_large_object_suppression =
 812                         !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
 813                 sensor_query->has_jitter_filter =
 814                         !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
 815                 query_size++;
 816         }
 817
 818         if (sensor_query->has_rel) {
 819                 rc = rmi_read(rmi_dev, query_base_addr + query_size,
 820                                         &sensor_query->f11_2d_query6);
 821                 if (rc < 0)
 822                         return rc;
 823                 query_size++;
 824         }
 825
 826         if (sensor_query->has_gestures) {
 827                 rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
 828                                         query_buf, RMI_F11_QUERY_GESTURE_SIZE);
 829                 if (rc < 0)
 830                         return rc;
 831
 832                 sensor_query->has_single_tap =
 833                         !!(query_buf[0] & RMI_F11_HAS_SINGLE_TAP);
 834                 sensor_query->has_tap_n_hold =
 835                         !!(query_buf[0] & RMI_F11_HAS_TAP_AND_HOLD);
 836                 sensor_query->has_double_tap =
 837                         !!(query_buf[0] & RMI_F11_HAS_DOUBLE_TAP);
 838                 sensor_query->has_early_tap =
 839                         !!(query_buf[0] & RMI_F11_HAS_EARLY_TAP);
 840                 sensor_query->has_flick =
 841                         !!(query_buf[0] & RMI_F11_HAS_FLICK);
 842                 sensor_query->has_press =
 843                         !!(query_buf[0] & RMI_F11_HAS_PRESS);
 844                 sensor_query->has_pinch =
 845                         !!(query_buf[0] & RMI_F11_HAS_PINCH);
 846                 sensor_query->has_chiral =
 847                         !!(query_buf[0] & RMI_F11_HAS_CHIRAL);
 848
 849                 /* query 8 */
 850                 sensor_query->has_palm_det =
 851                         !!(query_buf[1] & RMI_F11_HAS_PALM_DET);
 852                 sensor_query->has_rotate =
 853                         !!(query_buf[1] & RMI_F11_HAS_ROTATE);
 854                 sensor_query->has_touch_shapes =
 855                         !!(query_buf[1] & RMI_F11_HAS_TOUCH_SHAPES);
 856                 sensor_query->has_scroll_zones =
 857                         !!(query_buf[1] & RMI_F11_HAS_SCROLL_ZONES);
 858                 sensor_query->has_individual_scroll_zones =
 859                         !!(query_buf[1] & RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES);
 860                 sensor_query->has_mf_scroll =
 861                         !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL);
 862                 sensor_query->has_mf_edge_motion =
 863                         !!(query_buf[1] & RMI_F11_HAS_MF_EDGE_MOTION);
 864                 sensor_query->has_mf_scroll_inertia =
 865                         !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL_INERTIA);
 866
 867                 sensor_query->query7_nonzero = !!(query_buf[0]);
 868                 sensor_query->query8_nonzero = !!(query_buf[1]);
 869
 870                 query_size += 2;
 871         }
 872
 873         if (f11->has_query9) {
 874                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 875                 if (rc < 0)
 876                         return rc;
 877
 878                 sensor_query->has_pen =
 879                         !!(query_buf[0] & RMI_F11_HAS_PEN);
 880                 sensor_query->has_proximity =
 881                         !!(query_buf[0] & RMI_F11_HAS_PROXIMITY);
 882                 sensor_query->has_palm_det_sensitivity =
 883                         !!(query_buf[0] & RMI_F11_HAS_PALM_DET_SENSITIVITY);
 884                 sensor_query->has_suppress_on_palm_detect =
 885                         !!(query_buf[0] & RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT);
 886                 sensor_query->has_two_pen_thresholds =
 887                         !!(query_buf[0] & RMI_F11_HAS_TWO_PEN_THRESHOLDS);
 888                 sensor_query->has_contact_geometry =
 889                         !!(query_buf[0] & RMI_F11_HAS_CONTACT_GEOMETRY);
 890                 sensor_query->has_pen_hover_discrimination =
 891                         !!(query_buf[0] & RMI_F11_HAS_PEN_HOVER_DISCRIMINATION);
 892                 sensor_query->has_pen_filters =
 893                         !!(query_buf[0] & RMI_F11_HAS_PEN_FILTERS);
 894
 895                 query_size++;
 896         }
 897
 898         if (sensor_query->has_touch_shapes) {
 899                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 900                 if (rc < 0)
 901                         return rc;
 902
 903                 sensor_query->nr_touch_shapes = query_buf[0] &
 904                                 RMI_F11_NR_TOUCH_SHAPES_MASK;
 905
 906                 query_size++;
 907         }
 908
 909         if (f11->has_query11) {
 910                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 911                 if (rc < 0)
 912                         return rc;
 913
 914                 sensor_query->has_z_tuning =
 915                         !!(query_buf[0] & RMI_F11_HAS_Z_TUNING);
 916                 sensor_query->has_algorithm_selection =
 917                         !!(query_buf[0] & RMI_F11_HAS_ALGORITHM_SELECTION);
 918                 sensor_query->has_w_tuning =
 919                         !!(query_buf[0] & RMI_F11_HAS_W_TUNING);
 920                 sensor_query->has_pitch_info =
 921                         !!(query_buf[0] & RMI_F11_HAS_PITCH_INFO);
 922                 sensor_query->has_finger_size =
 923                         !!(query_buf[0] & RMI_F11_HAS_FINGER_SIZE);
 924                 sensor_query->has_segmentation_aggressiveness =
 925                         !!(query_buf[0] &
 926                                 RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS);
 927                 sensor_query->has_XY_clip =
 928                         !!(query_buf[0] & RMI_F11_HAS_XY_CLIP);
 929                 sensor_query->has_drumming_filter =
 930                         !!(query_buf[0] & RMI_F11_HAS_DRUMMING_FILTER);
 931
 932                 query_size++;
 933         }
 934
 935         if (f11->has_query12) {
 936                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 937                 if (rc < 0)
 938                         return rc;
 939
 940                 sensor_query->has_gapless_finger =
 941                         !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER);
 942                 sensor_query->has_gapless_finger_tuning =
 943                         !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER_TUNING);
 944                 sensor_query->has_8bit_w =
 945                         !!(query_buf[0] & RMI_F11_HAS_8BIT_W);
 946                 sensor_query->has_adjustable_mapping =
 947                         !!(query_buf[0] & RMI_F11_HAS_ADJUSTABLE_MAPPING);
 948                 sensor_query->has_info2 =
 949                         !!(query_buf[0] & RMI_F11_HAS_INFO2);
 950                 sensor_query->has_physical_props =
 951                         !!(query_buf[0] & RMI_F11_HAS_PHYSICAL_PROPS);
 952                 sensor_query->has_finger_limit =
 953                         !!(query_buf[0] & RMI_F11_HAS_FINGER_LIMIT);
 954                 sensor_query->has_linear_coeff_2 =
 955                         !!(query_buf[0] & RMI_F11_HAS_LINEAR_COEFF);
 956
 957                 query_size++;
 958         }
 959
 960         if (sensor_query->has_jitter_filter) {
 961                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 962                 if (rc < 0)
 963                         return rc;
 964
 965                 sensor_query->jitter_window_size = query_buf[0] &
 966                         RMI_F11_JITTER_WINDOW_MASK;
 967                 sensor_query->jitter_filter_type = (query_buf[0] &
 968                         RMI_F11_JITTER_FILTER_MASK) >>
 969                         RMI_F11_JITTER_FILTER_SHIFT;
 970
 971                 query_size++;
 972         }
 973
 974         if (sensor_query->has_info2) {
 975                 rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
 976                 if (rc < 0)
 977                         return rc;
 978
 979                 sensor_query->light_control =
 980                         query_buf[0] & RMI_F11_LIGHT_CONTROL_MASK;
 981                 sensor_query->is_clear =
 982                         !!(query_buf[0] & RMI_F11_IS_CLEAR);
 983                 sensor_query->clickpad_props =
 984                         (query_buf[0] & RMI_F11_CLICKPAD_PROPS_MASK) >>
 985                         RMI_F11_CLICKPAD_PROPS_SHIFT;
 986                 sensor_query->mouse_buttons =
 987                         (query_buf[0] & RMI_F11_MOUSE_BUTTONS_MASK) >>
 988                         RMI_F11_MOUSE_BUTTONS_SHIFT;
 989                 sensor_query->has_advanced_gestures =
 990                         !!(query_buf[0] & RMI_F11_HAS_ADVANCED_GESTURES);
 991
 992                 query_size++;
 993         }
 994
 995         if (sensor_query->has_physical_props) {
 996                 rc = rmi_read_block(rmi_dev, query_base_addr
 997                         + query_size, query_buf, 4);
 998                 if (rc < 0)
 999                         return rc;
1000
1001                 sensor_query->x_sensor_size_mm =
1002                         (query_buf[0] | (query_buf[1] << 8)) / 10;
1003                 sensor_query->y_sensor_size_mm =
1004                         (query_buf[2] | (query_buf[3] << 8)) / 10;
1005
1006                 /*
1007                  * query 15 - 18 contain the size of the sensor
1008                  * and query 19 - 26 contain bezel dimensions
1009                  */
1010                 query_size += 12;
1011         }
1012
1013         if (f11->has_query27)
1014                 ++query_size;
1015
1016         if (f11->has_query28) {
1017                 rc = rmi_read(rmi_dev, query_base_addr + query_size,
1018                                 query_buf);
1019                 if (rc < 0)
1020                         return rc;
1021
1022                 has_query36 = !!(query_buf[0] & BIT(6));
1023         }
1024
1025         if (has_query36) {
1026                 query_size += 2;
1027                 rc = rmi_read(rmi_dev, query_base_addr + query_size,
1028                                 query_buf);
1029                 if (rc < 0)
1030                         return rc;
1031
1032                 if (!!(query_buf[0] & BIT(5)))
1033                         f11->has_acm = true;
1034         }
1035
1036         return query_size;
1037 }
1038
1039 static int rmi_f11_initialize(struct rmi_function *fn)
1040 {
1041         struct rmi_device *rmi_dev = fn->rmi_dev;
1042         struct f11_data *f11;
1043         struct f11_2d_ctrl *ctrl;
1044         u8 query_offset;
1045         u16 query_base_addr;
1046         u16 control_base_addr;
1047         u16 max_x_pos, max_y_pos;
1048         int rc;
1049         const struct rmi_device_platform_data *pdata =
1050                                 rmi_get_platform_data(rmi_dev);
1051         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
1052         struct rmi_2d_sensor *sensor;
1053         u8 buf;
1054         int mask_size;
1055
1056         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Initializing F11 values.\n");
1057
1058         mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);
1059
1060         /*
1061         ** init instance data, fill in values and create any sysfs files
1062         */
1063         f11 = devm_kzalloc(&fn->dev, sizeof(struct f11_data) + mask_size * 2,
1064                         GFP_KERNEL);
1065         if (!f11)
1066                 return -ENOMEM;
1067
1068         if (fn->dev.of_node) {
1069                 rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
1070                 if (rc)
1071                         return rc;
1072         } else {
1073                 f11->sensor_pdata = pdata->sensor_pdata;
1074         }
1075
1076         f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;
1077
1078         f11->abs_mask = (unsigned long *)((char *)f11
1079                         + sizeof(struct f11_data));
1080         f11->rel_mask = (unsigned long *)((char *)f11
1081                         + sizeof(struct f11_data) + mask_size);
1082
1083         set_bit(fn->irq_pos, f11->abs_mask);
1084         set_bit(fn->irq_pos + 1, f11->rel_mask);
1085
1086         query_base_addr = fn->fd.query_base_addr;
1087         control_base_addr = fn->fd.control_base_addr;
1088
1089         rc = rmi_read(rmi_dev, query_base_addr, &buf);
1090         if (rc < 0)
1091                 return rc;
1092
1093         f11->has_query9 = !!(buf & RMI_F11_HAS_QUERY9);
1094         f11->has_query11 = !!(buf & RMI_F11_HAS_QUERY11);
1095         f11->has_query12 = !!(buf & RMI_F11_HAS_QUERY12);
1096         f11->has_query27 = !!(buf & RMI_F11_HAS_QUERY27);
1097         f11->has_query28 = !!(buf & RMI_F11_HAS_QUERY28);
1098
1099         query_offset = (query_base_addr + 1);
1100         sensor = &f11->sensor;
1101         sensor->fn = fn;
1102
1103         rc = rmi_f11_get_query_parameters(rmi_dev, f11,
1104                         &f11->sens_query, query_offset);
1105         if (rc < 0)
1106                 return rc;
1107         query_offset += rc;
1108
1109         rc = f11_read_control_regs(fn, &f11->dev_controls,
1110                         control_base_addr);
1111         if (rc < 0) {
1112                 dev_err(&fn->dev,
1113                         "Failed to read F11 control params.\n");
1114                 return rc;
1115         }
1116
1117         if (f11->sens_query.has_info2) {
1118                 if (f11->sens_query.is_clear)
1119                         f11->sensor.sensor_type = rmi_sensor_touchscreen;
1120                 else
1121                         f11->sensor.sensor_type = rmi_sensor_touchpad;
1122         }
1123
1124         sensor->report_abs = f11->sens_query.has_abs;
1125
1126         sensor->axis_align =
1127                 f11->sensor_pdata.axis_align;
1128
1129         sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad;
1130         sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking;
1131         sensor->dmax = f11->sensor_pdata.dmax;
1132         sensor->dribble = f11->sensor_pdata.dribble;
1133         sensor->palm_detect = f11->sensor_pdata.palm_detect;
1134
1135         if (f11->sens_query.has_physical_props) {
1136                 sensor->x_mm = f11->sens_query.x_sensor_size_mm;
1137                 sensor->y_mm = f11->sens_query.y_sensor_size_mm;
1138         } else {
1139                 sensor->x_mm = f11->sensor_pdata.x_mm;
1140                 sensor->y_mm = f11->sensor_pdata.y_mm;
1141         }
1142
1143         if (sensor->sensor_type == rmi_sensor_default)
1144                 sensor->sensor_type =
1145                         f11->sensor_pdata.sensor_type;
1146
1147         sensor->report_abs = sensor->report_abs
1148                 && !(f11->sensor_pdata.disable_report_mask
1149                         & RMI_F11_DISABLE_ABS_REPORT);
1150
1151         if (!sensor->report_abs)
1152                 /*
1153                  * If device doesn't have abs or if it has been disables
1154                  * fallback to reporting rel data.
1155                  */
1156                 sensor->report_rel = f11->sens_query.has_rel;
1157
1158         rc = rmi_read_block(rmi_dev,
1159                 control_base_addr + F11_CTRL_SENSOR_MAX_X_POS_OFFSET,
1160                 (u8 *)&max_x_pos, sizeof(max_x_pos));
1161         if (rc < 0)
1162                 return rc;
1163
1164         rc = rmi_read_block(rmi_dev,
1165                 control_base_addr + F11_CTRL_SENSOR_MAX_Y_POS_OFFSET,
1166                 (u8 *)&max_y_pos, sizeof(max_y_pos));
1167         if (rc < 0)
1168                 return rc;
1169
1170         sensor->max_x = max_x_pos;
1171         sensor->max_y = max_y_pos;
1172
1173         rc = f11_2d_construct_data(f11);
1174         if (rc < 0)
1175                 return rc;
1176
1177         if (f11->has_acm)
1178                 f11->sensor.attn_size += f11->sensor.nbr_fingers * 2;
1179
1180         /* allocate the in-kernel tracking buffers */
1181         sensor->tracking_pos = devm_kcalloc(&fn->dev,
1182                         sensor->nbr_fingers, sizeof(struct input_mt_pos),
1183                         GFP_KERNEL);
1184         sensor->tracking_slots = devm_kcalloc(&fn->dev,
1185                         sensor->nbr_fingers, sizeof(int), GFP_KERNEL);
1186         sensor->objs = devm_kcalloc(&fn->dev,
1187                         sensor->nbr_fingers,
1188                         sizeof(struct rmi_2d_sensor_abs_object),
1189                         GFP_KERNEL);
1190         if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
1191                 return -ENOMEM;
1192
1193         ctrl = &f11->dev_controls;
1194         if (sensor->axis_align.delta_x_threshold)
1195                 ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] =
1196                         sensor->axis_align.delta_x_threshold;
1197
1198         if (sensor->axis_align.delta_y_threshold)
1199                 ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
1200                         sensor->axis_align.delta_y_threshold;
1201
1202         /*
1203          * If distance threshold values are set, switch to reduced reporting
1204          * mode so they actually get used by the controller.
1205          */
1206         if (ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] ||
1207             ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD]) {
1208                 ctrl->ctrl0_11[0] &= ~RMI_F11_REPORT_MODE_MASK;
1209                 ctrl->ctrl0_11[0] |= RMI_F11_REPORT_MODE_REDUCED;
1210         }
1211
1212         if (f11->sens_query.has_dribble) {
1213                 switch (sensor->dribble) {
1214                 case RMI_REG_STATE_OFF:
1215                         ctrl->ctrl0_11[0] &= ~BIT(6);
1216                         break;
1217                 case RMI_REG_STATE_ON:
1218                         ctrl->ctrl0_11[0] |= BIT(6);
1219                         break;
1220                 case RMI_REG_STATE_DEFAULT:
1221                 default:
1222                         break;
1223                 }
1224         }
1225
1226         if (f11->sens_query.has_palm_det) {
1227                 switch (sensor->palm_detect) {
1228                 case RMI_REG_STATE_OFF:
1229                         ctrl->ctrl0_11[11] &= ~BIT(0);
1230                         break;
1231                 case RMI_REG_STATE_ON:
1232                         ctrl->ctrl0_11[11] |= BIT(0);
1233                         break;
1234                 case RMI_REG_STATE_DEFAULT:
1235                 default:
1236                         break;
1237                 }
1238         }
1239
1240         rc = f11_write_control_regs(fn, &f11->sens_query,
1241                            &f11->dev_controls, fn->fd.control_base_addr);
1242         if (rc)
1243                 dev_warn(&fn->dev, "Failed to write control registers\n");
1244
1245         mutex_init(&f11->dev_controls_mutex);
1246
1247         dev_set_drvdata(&fn->dev, f11);
1248
1249         return 0;
1250 }
1251
1252 static int rmi_f11_config(struct rmi_function *fn)
1253 {
1254         struct f11_data *f11 = dev_get_drvdata(&fn->dev);
1255         struct rmi_driver *drv = fn->rmi_dev->driver;
1256         struct rmi_2d_sensor *sensor = &f11->sensor;
1257         int rc;
1258
1259         if (!sensor->report_abs)
1260                 drv->clear_irq_bits(fn->rmi_dev, f11->abs_mask);
1261         else
1262                 drv->set_irq_bits(fn->rmi_dev, f11->abs_mask);
1263
1264         if (!sensor->report_rel)
1265                 drv->clear_irq_bits(fn->rmi_dev, f11->rel_mask);
1266         else
1267                 drv->set_irq_bits(fn->rmi_dev, f11->rel_mask);
1268
1269         rc = f11_write_control_regs(fn, &f11->sens_query,
1270                            &f11->dev_controls, fn->fd.query_base_addr);
1271         if (rc < 0)
1272                 return rc;
1273
1274         return 0;
1275 }
1276
1277 static irqreturn_t rmi_f11_attention(int irq, void *ctx)
1278 {
1279         struct rmi_function *fn = ctx;
1280         struct rmi_device *rmi_dev = fn->rmi_dev;
1281         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
1282         struct f11_data *f11 = dev_get_drvdata(&fn->dev);
1283         u16 data_base_addr = fn->fd.data_base_addr;
1284         int error;
1285         int valid_bytes = f11->sensor.pkt_size;
1286
1287         if (drvdata->attn_data.data) {
1288                 /*
1289                  * The valid data in the attention report is less then
1290                  * expected. Only process the complete fingers.
1291                  */
1292                 if (f11->sensor.attn_size > drvdata->attn_data.size)
1293                         valid_bytes = drvdata->attn_data.size;
1294                 else
1295                         valid_bytes = f11->sensor.attn_size;
1296                 memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
1297                         valid_bytes);
1298                 drvdata->attn_data.data += valid_bytes;
1299                 drvdata->attn_data.size -= valid_bytes;
1300         } else {
1301                 error = rmi_read_block(rmi_dev,
1302                                 data_base_addr, f11->sensor.data_pkt,
1303                                 f11->sensor.pkt_size);
1304                 if (error < 0)
1305                         return IRQ_RETVAL(error);
1306         }
1307
1308         rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes);
1309
1310         return IRQ_HANDLED;
1311 }
1312
1313 static int rmi_f11_resume(struct rmi_function *fn)
1314 {
1315         struct f11_data *f11 = dev_get_drvdata(&fn->dev);
1316         int error;
1317
1318         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Resuming...\n");
1319         if (!f11->rezero_wait_ms)
1320                 return 0;
1321
1322         mdelay(f11->rezero_wait_ms);
1323
1324         error = rmi_write(fn->rmi_dev, fn->fd.command_base_addr,
1325                                 RMI_F11_REZERO);
1326         if (error) {
1327                 dev_err(&fn->dev,
1328                         "%s: failed to issue rezero command, error = %d.",
1329                         __func__, error);
1330                 return error;
1331         }
1332
1333         return 0;
1334 }
1335
1336 static int rmi_f11_probe(struct rmi_function *fn)
1337 {
1338         int error;
1339         struct f11_data *f11;
1340
1341         error = rmi_f11_initialize(fn);
1342         if (error)
1343                 return error;
1344
1345         f11 = dev_get_drvdata(&fn->dev);
1346         error = rmi_2d_sensor_configure_input(fn, &f11->sensor);
1347         if (error)
1348                 return error;
1349
1350         return 0;
1351 }
1352
1353 struct rmi_function_handler rmi_f11_handler = {
1354         .driver = {
1355                 .name   = "rmi4_f11",
1356         },
1357         .func           = 0x11,
1358         .probe          = rmi_f11_probe,
1359         .config         = rmi_f11_config,
1360         .attention      = rmi_f11_attention,
1361         .resume         = rmi_f11_resume,
1362 };