1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * lm75.c - Part of lm_sensors, Linux kernel modules for hardware
5 * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/interrupt.h>
11 #include <linux/slab.h>
12 #include <linux/jiffies.h>
13 #include <linux/i2c.h>
14 #include <linux/hwmon.h>
15 #include <linux/err.h>
17 #include <linux/regmap.h>
18 #include <linux/util_macros.h>
19 #include <linux/regulator/consumer.h>
23 * This driver handles the LM75 and compatible digital temperature sensors.
26 enum lm75_type { /* keep sorted in alphabetical order */
58 * struct lm75_params - lm75 configuration parameters.
59 * @config_reg_16bits: Configure register size is 2 bytes.
60 * @set_mask: Bits to set in configuration register when configuring
62 * @clr_mask: Bits to clear in configuration register when configuring
64 * @default_resolution: Default number of bits to represent the temperature
66 * @resolution_limits: Limit register resolution. Optional. Should be set if
67 * the resolution of limit registers does not match the
68 * resolution of the temperature register.
69 * @resolutions: List of resolutions associated with sample times.
70 * Optional. Should be set if num_sample_times is larger
71 * than 1, and if the resolution changes with sample times.
72 * If set, number of entries must match num_sample_times.
73 * @default_sample_time:Sample time to be set by default.
74 * @num_sample_times: Number of possible sample times to be set. Optional.
75 * Should be set if the number of sample times is larger
77 * @sample_times: All the possible sample times to be set. Mandatory if
78 * num_sample_times is larger than 1. If set, number of
79 * entries must match num_sample_times.
80 * @alarm: Alarm bit is supported.
84 bool config_reg_16bits;
87 u8 default_resolution;
89 const u8 *resolutions;
90 unsigned int default_sample_time;
92 const unsigned int *sample_times;
96 /* Addresses scanned */
97 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
98 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
100 /* The LM75 registers */
101 #define LM75_REG_TEMP 0x00
102 #define LM75_REG_CONF 0x01
103 #define LM75_REG_HYST 0x02
104 #define LM75_REG_MAX 0x03
105 #define PCT2075_REG_IDLE 0x04
107 /* Each client has this additional data */
109 struct i2c_client *client;
110 struct regmap *regmap;
111 struct regulator *vs;
114 u8 resolution; /* In bits, 9 to 16 */
115 unsigned int sample_time; /* In ms */
117 const struct lm75_params *params;
120 /*-----------------------------------------------------------------------*/
122 static const u8 lm75_sample_set_masks[] = { 0 << 5, 1 << 5, 2 << 5, 3 << 5 };
124 #define LM75_SAMPLE_CLEAR_MASK (3 << 5)
126 /* The structure below stores the configuration values of the supported devices.
127 * In case of being supported multiple configurations, the default one must
128 * always be the first element of the array
130 static const struct lm75_params device_params[] = {
132 .clr_mask = 1 << 5, /* not one-shot mode */
133 .default_resolution = 12,
134 .default_sample_time = MSEC_PER_SEC / 10,
137 .config_reg_16bits = true,
138 .set_mask = 0x94C0, /* 8 sample/s, 4 CF, positive polarity */
139 .default_resolution = 12,
140 .default_sample_time = 125,
141 .num_sample_times = 4,
142 .sample_times = (unsigned int []){ 125, 250, 1000, 4000 },
146 .set_mask = 3 << 5, /* 12-bit mode*/
147 .default_resolution = 12,
148 .default_sample_time = 200,
149 .num_sample_times = 4,
150 .sample_times = (unsigned int []){ 25, 50, 100, 200 },
151 .resolutions = (u8 []) {9, 10, 11, 12 },
155 .set_mask = 2 << 5, /* 11-bit mode */
156 .default_resolution = 11,
157 .default_sample_time = 500,
158 .num_sample_times = 4,
159 .sample_times = (unsigned int []){ 125, 250, 500, 1000 },
160 .resolutions = (u8 []) {9, 10, 11, 12 },
164 .set_mask = 2 << 5, /* 11-bit mode */
165 .default_resolution = 11,
166 .default_sample_time = 600,
167 .num_sample_times = 4,
168 .sample_times = (unsigned int []){ 150, 300, 600, 1200 },
169 .resolutions = (u8 []) {9, 10, 11, 12 },
173 .set_mask = 2 << 5, /* 11-bit mode */
174 .default_resolution = 11,
175 .default_sample_time = 600,
176 .num_sample_times = 4,
177 .sample_times = (unsigned int []){ 150, 300, 600, 1200 },
178 .resolutions = (u8 []) {9, 10, 11, 12 },
181 .default_resolution = 9,
182 .default_sample_time = MSEC_PER_SEC / 6,
185 .set_mask = 3 << 5, /* 12-bit mode*/
186 .default_resolution = 12,
187 .default_sample_time = 200,
188 .num_sample_times = 4,
189 .sample_times = (unsigned int []){ 25, 50, 100, 200 },
190 .resolutions = (u8 []) {9, 10, 11, 12 },
193 .default_resolution = 9,
194 .default_sample_time = MSEC_PER_SEC / 10,
197 .default_resolution = 9,
198 .default_sample_time = MSEC_PER_SEC / 10,
201 .default_resolution = 9,
202 .default_sample_time = MSEC_PER_SEC / 10,
205 .default_resolution = 11,
206 .default_sample_time = MSEC_PER_SEC / 10,
209 .default_resolution = 9,
210 .default_sample_time = MSEC_PER_SEC / 7,
213 .default_resolution = 12,
214 .default_sample_time = MSEC_PER_SEC / 7,
215 .resolution_limits = 9,
218 .default_resolution = 16,
219 .default_sample_time = MSEC_PER_SEC / 20,
222 .default_resolution = 9,
223 .default_sample_time = MSEC_PER_SEC / 18,
226 .default_resolution = 11,
227 .default_sample_time = MSEC_PER_SEC / 10,
228 .num_sample_times = 31,
229 .sample_times = (unsigned int []){ 100, 200, 300, 400, 500, 600,
230 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700,
231 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700,
232 2800, 2900, 3000, 3100 },
235 .set_mask = 3 << 5, /* 12-bit mode */
236 .clr_mask = 1 << 7, /* not one-shot mode */
237 .default_resolution = 12,
238 .resolution_limits = 9,
239 .default_sample_time = 240,
240 .num_sample_times = 4,
241 .sample_times = (unsigned int []){ 30, 60, 120, 240 },
242 .resolutions = (u8 []) {9, 10, 11, 12 },
245 .set_mask = 3 << 5, /* 12-bit mode */
246 .clr_mask = 1 << 7, /* not one-shot mode */
247 .default_resolution = 12,
248 .default_sample_time = 320,
249 .num_sample_times = 4,
250 .sample_times = (unsigned int []){ 40, 80, 160, 320 },
251 .resolutions = (u8 []) {9, 10, 11, 12 },
254 .set_mask = 3 << 5, /* 12-bit mode */
255 .clr_mask = 1 << 7, /* not one-shot mode */
256 .default_resolution = 12,
257 .default_sample_time = 320,
258 .num_sample_times = 4,
259 .sample_times = (unsigned int []){ 40, 80, 160, 320 },
260 .resolutions = (u8 []) {9, 10, 11, 12 },
263 .set_mask = 3 << 5, /* 12-bit mode */
264 .clr_mask = 1 << 7, /* not one-shot mode*/
265 .default_resolution = 12,
266 .default_sample_time = 220,
267 .num_sample_times = 4,
268 .sample_times = (unsigned int []){ 28, 55, 110, 220 },
269 .resolutions = (u8 []) {9, 10, 11, 12 },
272 .config_reg_16bits = true,
273 .set_mask = 0x60C0, /* 12-bit mode, 8 samples / second */
274 .clr_mask = 1 << 15, /* no one-shot mode*/
275 .default_resolution = 12,
276 .default_sample_time = 125,
277 .num_sample_times = 4,
278 .sample_times = (unsigned int []){ 125, 250, 1000, 4000 },
281 .set_mask = 3 << 5, /* 12-bit mode */
282 .clr_mask = 1 << 7, /* not one-shot mode*/
283 .default_resolution = 12,
284 .default_sample_time = 220,
285 .num_sample_times = 4,
286 .sample_times = (unsigned int []){ 28, 55, 110, 220 },
287 .resolutions = (u8 []) {9, 10, 11, 12 },
290 .set_mask = 3 << 5, /* 12-bit mode */
291 .clr_mask = 1 << 7, /* not one-shot mode*/
292 .default_resolution = 12,
293 .default_sample_time = 220,
294 .num_sample_times = 4,
295 .sample_times = (unsigned int []){ 28, 55, 110, 220 },
296 .resolutions = (u8 []) {9, 10, 11, 12 },
299 .set_mask = 3 << 5, /* 12-bit mode */
300 .clr_mask = 1 << 7, /* not one-shot mode*/
301 .default_resolution = 12,
302 .default_sample_time = 220,
303 .num_sample_times = 4,
304 .sample_times = (unsigned int []){ 28, 55, 110, 220 },
305 .resolutions = (u8 []) {9, 10, 11, 12 },
307 [tmp75b] = { /* not one-shot mode, Conversion rate 37Hz */
308 .clr_mask = 1 << 7 | 3 << 5,
309 .default_resolution = 12,
310 .default_sample_time = MSEC_PER_SEC / 37,
311 .sample_times = (unsigned int []){ MSEC_PER_SEC / 37,
313 MSEC_PER_SEC / 9, MSEC_PER_SEC / 4 },
314 .num_sample_times = 4,
317 .clr_mask = 1 << 5, /*not one-shot mode*/
318 .default_resolution = 12,
319 .default_sample_time = MSEC_PER_SEC / 12,
321 [tmp1075] = { /* not one-shot mode, 27.5 ms sample rate */
322 .clr_mask = 1 << 5 | 1 << 6 | 1 << 7,
323 .default_resolution = 12,
324 .default_sample_time = 28,
325 .num_sample_times = 4,
326 .sample_times = (unsigned int []){ 28, 55, 110, 220 },
330 static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
332 return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
335 static int lm75_write_config(struct lm75_data *data, u16 set_mask,
340 clr_mask |= LM75_SHUTDOWN << (8 * data->params->config_reg_16bits);
341 value = data->current_conf & ~clr_mask;
344 if (data->current_conf != value) {
346 if (data->params->config_reg_16bits)
347 err = regmap_write(data->regmap, LM75_REG_CONF, value);
349 err = i2c_smbus_write_byte_data(data->client,
354 data->current_conf = value;
359 static int lm75_read_config(struct lm75_data *data)
364 if (data->params->config_reg_16bits) {
365 ret = regmap_read(data->regmap, LM75_REG_CONF, &status);
366 return ret ? ret : status;
369 return i2c_smbus_read_byte_data(data->client, LM75_REG_CONF);
372 static irqreturn_t lm75_alarm_handler(int irq, void *private)
374 struct device *hwmon_dev = private;
376 hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_alarm, 0);
380 static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
381 u32 attr, int channel, long *val)
383 struct lm75_data *data = dev_get_drvdata(dev);
390 case hwmon_chip_update_interval:
391 *val = data->sample_time;
399 case hwmon_temp_input:
405 case hwmon_temp_max_hyst:
408 case hwmon_temp_alarm:
414 err = regmap_read(data->regmap, reg, ®val);
418 if (attr == hwmon_temp_alarm) {
419 switch (data->kind) {
421 *val = (regval >> 5) & 0x1;
427 *val = lm75_reg_to_mc(regval, data->resolution);
436 static int lm75_write_temp(struct device *dev, u32 attr, long temp)
438 struct lm75_data *data = dev_get_drvdata(dev);
446 case hwmon_temp_max_hyst:
454 * Resolution of limit registers is assumed to be the same as the
455 * temperature input register resolution unless given explicitly.
457 if (data->params->resolution_limits)
458 resolution = data->params->resolution_limits;
460 resolution = data->resolution;
462 temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
463 temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
464 1000) << (16 - resolution);
466 return regmap_write(data->regmap, reg, (u16)temp);
469 static int lm75_update_interval(struct device *dev, long val)
471 struct lm75_data *data = dev_get_drvdata(dev);
476 index = find_closest(val, data->params->sample_times,
477 (int)data->params->num_sample_times);
479 switch (data->kind) {
481 err = lm75_write_config(data, lm75_sample_set_masks[index],
482 LM75_SAMPLE_CLEAR_MASK);
486 data->sample_time = data->params->sample_times[index];
487 if (data->params->resolutions)
488 data->resolution = data->params->resolutions[index];
492 err = regmap_read(data->regmap, LM75_REG_CONF, ®);
496 reg |= (3 - index) << 6;
497 err = regmap_write(data->regmap, LM75_REG_CONF, reg);
500 data->sample_time = data->params->sample_times[index];
503 err = i2c_smbus_write_byte_data(data->client, PCT2075_REG_IDLE,
507 data->sample_time = data->params->sample_times[index];
513 static int lm75_write_chip(struct device *dev, u32 attr, long val)
516 case hwmon_chip_update_interval:
517 return lm75_update_interval(dev, val);
524 static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
525 u32 attr, int channel, long val)
529 return lm75_write_chip(dev, attr, val);
531 return lm75_write_temp(dev, attr, val);
538 static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
539 u32 attr, int channel)
541 const struct lm75_data *config_data = data;
546 case hwmon_chip_update_interval:
547 if (config_data->params->num_sample_times > 1)
554 case hwmon_temp_input:
557 case hwmon_temp_max_hyst:
559 case hwmon_temp_alarm:
560 if (config_data->params->alarm)
571 static const struct hwmon_channel_info * const lm75_info[] = {
572 HWMON_CHANNEL_INFO(chip,
573 HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
574 HWMON_CHANNEL_INFO(temp,
575 HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
580 static const struct hwmon_ops lm75_hwmon_ops = {
581 .is_visible = lm75_is_visible,
586 static const struct hwmon_chip_info lm75_chip_info = {
587 .ops = &lm75_hwmon_ops,
591 static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
593 return reg != LM75_REG_TEMP;
596 static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
598 return reg == LM75_REG_TEMP || reg == LM75_REG_CONF;
601 static const struct regmap_config lm75_regmap_config = {
604 .max_register = PCT2075_REG_IDLE,
605 .writeable_reg = lm75_is_writeable_reg,
606 .volatile_reg = lm75_is_volatile_reg,
607 .val_format_endian = REGMAP_ENDIAN_BIG,
608 .cache_type = REGCACHE_MAPLE,
609 .use_single_read = true,
610 .use_single_write = true,
613 static void lm75_disable_regulator(void *data)
615 struct lm75_data *lm75 = data;
617 regulator_disable(lm75->vs);
620 static void lm75_remove(void *data)
622 struct lm75_data *lm75 = data;
623 struct i2c_client *client = lm75->client;
625 i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
628 static const struct i2c_device_id lm75_ids[];
630 static int lm75_probe(struct i2c_client *client)
632 struct device *dev = &client->dev;
633 struct device *hwmon_dev;
634 struct lm75_data *data;
638 if (client->dev.of_node)
639 kind = (uintptr_t)of_device_get_match_data(&client->dev);
641 kind = i2c_match_id(lm75_ids, client)->driver_data;
643 if (!i2c_check_functionality(client->adapter,
644 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
647 data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
651 data->client = client;
654 data->vs = devm_regulator_get(dev, "vs");
655 if (IS_ERR(data->vs))
656 return PTR_ERR(data->vs);
658 data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
659 if (IS_ERR(data->regmap))
660 return PTR_ERR(data->regmap);
662 /* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
663 * Then tweak to be more precise when appropriate.
666 data->params = &device_params[data->kind];
668 /* Save default sample time and resolution*/
669 data->sample_time = data->params->default_sample_time;
670 data->resolution = data->params->default_resolution;
672 /* Enable the power */
673 err = regulator_enable(data->vs);
675 dev_err(dev, "failed to enable regulator: %d\n", err);
679 err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
683 /* Cache original configuration */
684 status = lm75_read_config(data);
686 dev_dbg(dev, "Can't read config? %d\n", status);
689 data->orig_conf = status;
690 data->current_conf = status;
692 err = lm75_write_config(data, data->params->set_mask,
693 data->params->clr_mask);
697 err = devm_add_action_or_reset(dev, lm75_remove, data);
701 hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
702 data, &lm75_chip_info,
704 if (IS_ERR(hwmon_dev))
705 return PTR_ERR(hwmon_dev);
708 if (data->params->alarm) {
709 err = devm_request_threaded_irq(dev,
719 /* alarm is only supported for chips with alarm bit */
720 dev_err(dev, "alarm interrupt is not supported\n");
724 dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
729 static const struct i2c_device_id lm75_ids[] = {
731 { "as6200", as6200, },
732 { "at30ts74", at30ts74, },
733 { "ds1775", ds1775, },
735 { "ds7505", ds7505, },
740 { "max6625", max6625, },
741 { "max6626", max6626, },
742 { "max31725", max31725, },
743 { "max31726", max31725, },
744 { "mcp980x", mcp980x, },
745 { "pct2075", pct2075, },
746 { "stds75", stds75, },
747 { "stlm75", stlm75, },
749 { "tmp100", tmp100, },
750 { "tmp101", tmp101, },
751 { "tmp105", tmp105, },
752 { "tmp112", tmp112, },
753 { "tmp175", tmp175, },
754 { "tmp275", tmp275, },
756 { "tmp75b", tmp75b, },
757 { "tmp75c", tmp75c, },
758 { "tmp1075", tmp1075, },
761 MODULE_DEVICE_TABLE(i2c, lm75_ids);
763 static const struct of_device_id __maybe_unused lm75_of_match[] = {
765 .compatible = "adi,adt75",
766 .data = (void *)adt75
769 .compatible = "ams,as6200",
770 .data = (void *)as6200
773 .compatible = "atmel,at30ts74",
774 .data = (void *)at30ts74
777 .compatible = "dallas,ds1775",
778 .data = (void *)ds1775
781 .compatible = "dallas,ds75",
785 .compatible = "dallas,ds7505",
786 .data = (void *)ds7505
789 .compatible = "gmt,g751",
793 .compatible = "national,lm75",
797 .compatible = "national,lm75a",
798 .data = (void *)lm75a
801 .compatible = "national,lm75b",
802 .data = (void *)lm75b
805 .compatible = "maxim,max6625",
806 .data = (void *)max6625
809 .compatible = "maxim,max6626",
810 .data = (void *)max6626
813 .compatible = "maxim,max31725",
814 .data = (void *)max31725
817 .compatible = "maxim,max31726",
818 .data = (void *)max31725
821 .compatible = "maxim,mcp980x",
822 .data = (void *)mcp980x
825 .compatible = "nxp,pct2075",
826 .data = (void *)pct2075
829 .compatible = "st,stds75",
830 .data = (void *)stds75
833 .compatible = "st,stlm75",
834 .data = (void *)stlm75
837 .compatible = "microchip,tcn75",
838 .data = (void *)tcn75
841 .compatible = "ti,tmp100",
842 .data = (void *)tmp100
845 .compatible = "ti,tmp101",
846 .data = (void *)tmp101
849 .compatible = "ti,tmp105",
850 .data = (void *)tmp105
853 .compatible = "ti,tmp112",
854 .data = (void *)tmp112
857 .compatible = "ti,tmp175",
858 .data = (void *)tmp175
861 .compatible = "ti,tmp275",
862 .data = (void *)tmp275
865 .compatible = "ti,tmp75",
866 .data = (void *)tmp75
869 .compatible = "ti,tmp75b",
870 .data = (void *)tmp75b
873 .compatible = "ti,tmp75c",
874 .data = (void *)tmp75c
877 .compatible = "ti,tmp1075",
878 .data = (void *)tmp1075
882 MODULE_DEVICE_TABLE(of, lm75_of_match);
884 #define LM75A_ID 0xA1
886 /* Return 0 if detection is successful, -ENODEV otherwise */
887 static int lm75_detect(struct i2c_client *new_client,
888 struct i2c_board_info *info)
890 struct i2c_adapter *adapter = new_client->adapter;
895 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
896 I2C_FUNC_SMBUS_WORD_DATA))
900 * Now, we do the remaining detection. There is no identification-
901 * dedicated register so we have to rely on several tricks:
902 * unused bits, registers cycling over 8-address boundaries,
903 * addresses 0x04-0x07 returning the last read value.
904 * The cycling+unused addresses combination is not tested,
905 * since it would significantly slow the detection down and would
906 * hardly add any value.
908 * The National Semiconductor LM75A is different than earlier
909 * LM75s. It has an ID byte of 0xaX (where X is the chip
910 * revision, with 1 being the only revision in existence) in
911 * register 7, and unused registers return 0xff rather than the
914 * Note that this function only detects the original National
915 * Semiconductor LM75 and the LM75A. Clones from other vendors
916 * aren't detected, on purpose, because they are typically never
917 * found on PC hardware. They are found on embedded designs where
918 * they can be instantiated explicitly so detection is not needed.
919 * The absence of identification registers on all these clones
920 * would make their exhaustive detection very difficult and weak,
921 * and odds are that the driver would bind to unsupported devices.
925 conf = i2c_smbus_read_byte_data(new_client, 1);
929 /* First check for LM75A */
930 if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
932 * LM75A returns 0xff on unused registers so
933 * just to be sure we check for that too.
935 if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
936 || i2c_smbus_read_byte_data(new_client, 5) != 0xff
937 || i2c_smbus_read_byte_data(new_client, 6) != 0xff)
940 hyst = i2c_smbus_read_byte_data(new_client, 2);
941 os = i2c_smbus_read_byte_data(new_client, 3);
942 } else { /* Traditional style LM75 detection */
943 /* Unused addresses */
944 hyst = i2c_smbus_read_byte_data(new_client, 2);
945 if (i2c_smbus_read_byte_data(new_client, 4) != hyst
946 || i2c_smbus_read_byte_data(new_client, 5) != hyst
947 || i2c_smbus_read_byte_data(new_client, 6) != hyst
948 || i2c_smbus_read_byte_data(new_client, 7) != hyst)
950 os = i2c_smbus_read_byte_data(new_client, 3);
951 if (i2c_smbus_read_byte_data(new_client, 4) != os
952 || i2c_smbus_read_byte_data(new_client, 5) != os
953 || i2c_smbus_read_byte_data(new_client, 6) != os
954 || i2c_smbus_read_byte_data(new_client, 7) != os)
958 * It is very unlikely that this is a LM75 if both
959 * hysteresis and temperature limit registers are 0.
961 if (hyst == 0 && os == 0)
964 /* Addresses cycling */
965 for (i = 8; i <= 248; i += 40) {
966 if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
967 || i2c_smbus_read_byte_data(new_client, i + 2) != hyst
968 || i2c_smbus_read_byte_data(new_client, i + 3) != os)
970 if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
975 strscpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);
981 static int lm75_suspend(struct device *dev)
984 struct i2c_client *client = to_i2c_client(dev);
986 status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
988 dev_dbg(&client->dev, "Can't read config? %d\n", status);
991 status = status | LM75_SHUTDOWN;
992 i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
996 static int lm75_resume(struct device *dev)
999 struct i2c_client *client = to_i2c_client(dev);
1001 status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
1003 dev_dbg(&client->dev, "Can't read config? %d\n", status);
1006 status = status & ~LM75_SHUTDOWN;
1007 i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
1011 static const struct dev_pm_ops lm75_dev_pm_ops = {
1012 .suspend = lm75_suspend,
1013 .resume = lm75_resume,
1015 #define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
1017 #define LM75_DEV_PM_OPS NULL
1018 #endif /* CONFIG_PM */
1020 static struct i2c_driver lm75_driver = {
1021 .class = I2C_CLASS_HWMON,
1024 .of_match_table = of_match_ptr(lm75_of_match),
1025 .pm = LM75_DEV_PM_OPS,
1027 .probe = lm75_probe,
1028 .id_table = lm75_ids,
1029 .detect = lm75_detect,
1030 .address_list = normal_i2c,
1033 module_i2c_driver(lm75_driver);
1035 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
1036 MODULE_DESCRIPTION("LM75 driver");
1037 MODULE_LICENSE("GPL");