2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
42 config SENSORS_ABITUGURU
43 tristate "Abit uGuru (rev 1 & 2)"
44 depends on X86 && EXPERIMENTAL
46 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
57 config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
59 depends on X86 && EXPERIMENTAL
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
72 tristate "Analog Devices AD7414"
73 depends on I2C && EXPERIMENTAL
75 If you say yes here you get support for the Analog Devices
76 AD7414 temperature monitoring chip.
78 This driver can also be built as a module. If so, the module
79 will be called ad7414.
82 tristate "Analog Devices AD7416, AD7417 and AD7418"
83 depends on I2C && EXPERIMENTAL
85 If you say yes here you get support for the Analog Devices
86 AD7416, AD7417 and AD7418 temperature monitoring chips.
88 This driver can also be built as a module. If so, the module
89 will be called ad7418.
92 tristate "National Semiconductor ADCxxxSxxx"
93 depends on SPI_MASTER && EXPERIMENTAL
95 If you say yes here you get support for the National Semiconductor
96 ADC<bb><c>S<sss> chip family, where
97 * bb is the resolution in number of bits (8, 10, 12)
98 * c is the number of channels (1, 2, 4, 8)
99 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
100 kSPS and 101 for 1 MSPS)
102 Examples : ADC081S101, ADC124S501, ...
104 This driver can also be built as a module. If so, the module
105 will be called adcxx.
107 config SENSORS_ADM1021
108 tristate "Analog Devices ADM1021 and compatibles"
111 If you say yes here you get support for Analog Devices ADM1021
112 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
113 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
114 and the XEON processor built-in sensor.
116 This driver can also be built as a module. If so, the module
117 will be called adm1021.
119 config SENSORS_ADM1025
120 tristate "Analog Devices ADM1025 and compatibles"
124 If you say yes here you get support for Analog Devices ADM1025
125 and Philips NE1619 sensor chips.
127 This driver can also be built as a module. If so, the module
128 will be called adm1025.
130 config SENSORS_ADM1026
131 tristate "Analog Devices ADM1026 and compatibles"
135 If you say yes here you get support for Analog Devices ADM1026
138 This driver can also be built as a module. If so, the module
139 will be called adm1026.
141 config SENSORS_ADM1029
142 tristate "Analog Devices ADM1029"
145 If you say yes here you get support for Analog Devices ADM1029
147 Very rare chip, please let us know you use it.
149 This driver can also be built as a module. If so, the module
150 will be called adm1029.
152 config SENSORS_ADM1031
153 tristate "Analog Devices ADM1031 and compatibles"
156 If you say yes here you get support for Analog Devices ADM1031
157 and ADM1030 sensor chips.
159 This driver can also be built as a module. If so, the module
160 will be called adm1031.
162 config SENSORS_ADM9240
163 tristate "Analog Devices ADM9240 and compatibles"
167 If you say yes here you get support for Analog Devices ADM9240,
168 Dallas DS1780, National Semiconductor LM81 sensor chips.
170 This driver can also be built as a module. If so, the module
171 will be called adm9240.
173 config SENSORS_ADT7411
174 tristate "Analog Devices ADT7411"
175 depends on I2C && EXPERIMENTAL
177 If you say yes here you get support for the Analog Devices
178 ADT7411 voltage and temperature monitoring chip.
180 This driver can also be built as a module. If so, the module
181 will be called adt7411.
183 config SENSORS_ADT7462
184 tristate "Analog Devices ADT7462"
185 depends on I2C && EXPERIMENTAL
187 If you say yes here you get support for the Analog Devices
188 ADT7462 temperature monitoring chips.
190 This driver can also be built as a module. If so, the module
191 will be called adt7462.
193 config SENSORS_ADT7470
194 tristate "Analog Devices ADT7470"
195 depends on I2C && EXPERIMENTAL
197 If you say yes here you get support for the Analog Devices
198 ADT7470 temperature monitoring chips.
200 This driver can also be built as a module. If so, the module
201 will be called adt7470.
203 config SENSORS_ADT7475
204 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
208 If you say yes here you get support for the Analog Devices
209 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
212 This driver can also be build as a module. If so, the module
213 will be called adt7475.
215 config SENSORS_ASC7621
216 tristate "Andigilog aSC7621"
217 depends on HWMON && I2C
219 If you say yes here you get support for the aSC7621
220 family of SMBus sensors chip found on most Intel X38, X48, X58,
221 945, 965 and 975 desktop boards. Currently supported chips:
225 This driver can also be built as a module. If so, the module
226 will be called asc7621.
228 config SENSORS_K8TEMP
229 tristate "AMD Athlon64/FX or Opteron temperature sensor"
230 depends on X86 && PCI && EXPERIMENTAL
232 If you say yes here you get support for the temperature
233 sensor(s) inside your CPU. Supported is whole AMD K8
234 microarchitecture. Please note that you will need at least
235 lm-sensors 2.10.1 for proper userspace support.
237 This driver can also be built as a module. If so, the module
238 will be called k8temp.
240 config SENSORS_K10TEMP
241 tristate "AMD Family 10h/11h/12h/14h temperature sensor"
242 depends on X86 && PCI
244 If you say yes here you get support for the temperature
245 sensor(s) inside your CPU. Supported are later revisions of
246 the AMD Family 10h and all revisions of the AMD Family 11h,
247 12h (Llano), and 14h (Brazos) microarchitectures.
249 This driver can also be built as a module. If so, the module
250 will be called k10temp.
252 config SENSORS_ASB100
253 tristate "Asus ASB100 Bach"
254 depends on X86 && I2C && EXPERIMENTAL
257 If you say yes here you get support for the ASB100 Bach sensor
258 chip found on some Asus mainboards.
260 This driver can also be built as a module. If so, the module
261 will be called asb100.
264 tristate "Attansic ATXP1 VID controller"
265 depends on I2C && EXPERIMENTAL
268 If you say yes here you get support for the Attansic ATXP1 VID
271 If your board have such a chip, you are able to control your CPU
272 core and other voltages.
274 This driver can also be built as a module. If so, the module
275 will be called atxp1.
278 tristate "Dallas Semiconductor DS620"
281 If you say yes here you get support for Dallas Semiconductor
284 This driver can also be built as a module. If so, the module
285 will be called ds620.
287 config SENSORS_DS1621
288 tristate "Dallas Semiconductor DS1621 and DS1625"
291 If you say yes here you get support for Dallas Semiconductor
292 DS1621 and DS1625 sensor chips.
294 This driver can also be built as a module. If so, the module
295 will be called ds1621.
297 config SENSORS_I5K_AMB
298 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
299 depends on PCI && EXPERIMENTAL
301 If you say yes here you get support for FB-DIMM AMB temperature
302 monitoring chips on systems with the Intel 5000 series chipset.
304 This driver can also be built as a module. If so, the module
305 will be called i5k_amb.
307 config SENSORS_F71805F
308 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
310 If you say yes here you get support for hardware monitoring
311 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
314 This driver can also be built as a module. If so, the module
315 will be called f71805f.
317 config SENSORS_F71882FG
318 tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
320 If you say yes here you get support for hardware monitoring
321 features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
322 F71889FG and F8000 Super-I/O chips.
324 This driver can also be built as a module. If so, the module
325 will be called f71882fg.
327 config SENSORS_F75375S
328 tristate "Fintek F75375S/SP and F75373"
331 If you say yes here you get support for hardware monitoring
332 features of the Fintek F75375S/SP and F75373
334 This driver can also be built as a module. If so, the module
335 will be called f75375s.
337 config SENSORS_FSCHMD
338 tristate "Fujitsu Siemens Computers sensor chips"
339 depends on X86 && I2C
341 If you say yes here you get support for the following Fujitsu
342 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
343 Heimdall, Heracles, Hades and Syleus including support for the
346 This is a merged driver for FSC sensor chips replacing the fscpos,
347 fscscy and fscher drivers and adding support for several other FSC
350 This driver can also be built as a module. If so, the module
351 will be called fschmd.
357 If you say yes here you get support for Global Mixed-mode
358 Technology Inc G760A fan speed PWM controller chips.
360 This driver can also be built as a module. If so, the module
361 will be called g760a.
363 config SENSORS_GL518SM
364 tristate "Genesys Logic GL518SM"
367 If you say yes here you get support for Genesys Logic GL518SM
370 This driver can also be built as a module. If so, the module
371 will be called gl518sm.
373 config SENSORS_GL520SM
374 tristate "Genesys Logic GL520SM"
378 If you say yes here you get support for Genesys Logic GL520SM
381 This driver can also be built as a module. If so, the module
382 will be called gl520sm.
384 config SENSORS_GPIO_FAN
386 depends on GENERIC_GPIO
388 If you say yes here you get support for fans connected to GPIO lines.
390 This driver can also be built as a module. If so, the module
391 will be called gpio-fan.
393 config SENSORS_CORETEMP
394 tristate "Intel Core/Core2/Atom temperature sensor"
395 depends on X86 && PCI && EXPERIMENTAL
397 If you say yes here you get support for the temperature
398 sensor inside your CPU. Most of the family 6 CPUs
399 are supported. Check Documentation/hwmon/coretemp for details.
401 config SENSORS_PKGTEMP
402 tristate "Intel processor package temperature sensor"
403 depends on X86 && EXPERIMENTAL
405 If you say yes here you get support for the package level temperature
406 sensor inside your CPU. Check documentation/driver for details.
408 config SENSORS_IBMAEM
409 tristate "IBM Active Energy Manager temperature/power sensors and control"
411 depends on IPMI_HANDLER
413 If you say yes here you get support for the temperature and
414 power sensors and capping hardware in various IBM System X
415 servers that support Active Energy Manager. This includes
416 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
417 and certain HC10/HS2x/LS2x/QS2x blades.
419 This driver can also be built as a module. If so, the module
420 will be called ibmaem.
422 config SENSORS_IBMPEX
423 tristate "IBM PowerExecutive temperature/power sensors"
425 depends on IPMI_HANDLER
427 If you say yes here you get support for the temperature and
428 power sensors in various IBM System X servers that support
429 PowerExecutive. So far this includes the x3350, x3550, x3650,
430 x3655, and x3755; the x3800, x3850, and x3950 models that have
431 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
433 This driver can also be built as a module. If so, the module
434 will be called ibmpex.
437 tristate "ITE IT87xx and compatibles"
440 If you say yes here you get support for ITE IT8705F, IT8712F,
441 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
442 chips, and the SiS960 clone.
444 This driver can also be built as a module. If so, the module
447 config SENSORS_JZ4740
448 tristate "Ingenic JZ4740 SoC ADC driver"
449 depends on MACH_JZ4740 && MFD_JZ4740_ADC
451 If you say yes here you get support for reading adc values from the ADCIN
452 pin on Ingenic JZ4740 SoC based boards.
454 This driver can also be build as a module. If so, the module will be
458 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
461 If you say yes here, you get support for JEDEC JC42.4 compliant
462 temperature sensors, which are used on many DDR3 memory modules for
463 mobile devices and servers. Support will include, but not be limited
464 to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
465 MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
467 This driver can also be built as a module. If so, the module
470 config SENSORS_LINEAGE
471 tristate "Lineage Compact Power Line Power Entry Module"
472 depends on I2C && EXPERIMENTAL
474 If you say yes here you get support for the Lineage Compact Power Line
475 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
476 CP2000DC, CP2725, and others.
478 This driver can also be built as a module. If so, the module
479 will be called lineage-pem.
482 tristate "National Semiconductor LM63 and LM64"
485 If you say yes here you get support for the National
486 Semiconductor LM63 and LM64 remote diode digital temperature
487 sensors with integrated fan control. Such chips are found
488 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
491 This driver can also be built as a module. If so, the module
495 tristate "National Semiconductor LM70 / Texas Instruments TMP121"
496 depends on SPI_MASTER
498 If you say yes here you get support for the National Semiconductor
499 LM70 and Texas Instruments TMP121/TMP123 digital temperature
502 This driver can also be built as a module. If so, the module
506 tristate "National Semiconductor LM73"
509 If you say yes here you get support for National Semiconductor LM73
511 This driver can also be built as a module. If so, the module
515 tristate "National Semiconductor LM75 and compatibles"
518 If you say yes here you get support for one common type of
519 temperature sensor chip, with models including:
521 - Dallas Semiconductor DS75 and DS1775
522 - Maxim MAX6625 and MAX6626
524 - National Semiconductor LM75
526 - ST Microelectronics STDS75
527 - TelCom (now Microchip) TCN75
528 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
531 This driver supports driver model based binding through board
532 specific I2C device tables.
534 It also supports the "legacy" style of driver binding. To use
535 that with some chips which don't replicate LM75 quirks exactly,
536 you may need the "force" module parameter.
538 This driver can also be built as a module. If so, the module
542 tristate "National Semiconductor LM77"
545 If you say yes here you get support for National Semiconductor LM77
548 This driver can also be built as a module. If so, the module
552 tristate "National Semiconductor LM78 and compatibles"
556 If you say yes here you get support for National Semiconductor LM78,
559 This driver can also be built as a module. If so, the module
563 tristate "National Semiconductor LM80"
566 If you say yes here you get support for National Semiconductor
569 This driver can also be built as a module. If so, the module
573 tristate "National Semiconductor LM83 and compatibles"
576 If you say yes here you get support for National Semiconductor
577 LM82 and LM83 sensor chips.
579 This driver can also be built as a module. If so, the module
583 tristate "National Semiconductor LM85 and compatibles"
587 If you say yes here you get support for National Semiconductor LM85
588 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
589 EMC6D101, EMC6D102, and EMC6D103.
591 This driver can also be built as a module. If so, the module
595 tristate "National Semiconductor LM87 and compatibles"
599 If you say yes here you get support for National Semiconductor LM87
600 and Analog Devices ADM1024 sensor chips.
602 This driver can also be built as a module. If so, the module
606 tristate "National Semiconductor LM90 and compatibles"
609 If you say yes here you get support for National Semiconductor LM90,
610 LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
611 MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
612 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
613 W83L771W/G/AWG/ASG sensor chips.
615 This driver can also be built as a module. If so, the module
619 tristate "National Semiconductor LM92 and compatibles"
622 If you say yes here you get support for National Semiconductor LM92
623 and Maxim MAX6635 sensor chips.
625 This driver can also be built as a module. If so, the module
629 tristate "National Semiconductor LM93 and compatibles"
633 If you say yes here you get support for National Semiconductor LM93,
634 LM94, and compatible sensor chips.
636 This driver can also be built as a module. If so, the module
639 config SENSORS_LTC4215
640 tristate "Linear Technology LTC4215"
641 depends on I2C && EXPERIMENTAL
644 If you say yes here you get support for Linear Technology LTC4215
645 Hot Swap Controller I2C interface.
647 This driver can also be built as a module. If so, the module will
650 config SENSORS_LTC4245
651 tristate "Linear Technology LTC4245"
652 depends on I2C && EXPERIMENTAL
655 If you say yes here you get support for Linear Technology LTC4245
656 Multiple Supply Hot Swap Controller I2C interface.
658 This driver can also be built as a module. If so, the module will
661 config SENSORS_LTC4261
662 tristate "Linear Technology LTC4261"
663 depends on I2C && EXPERIMENTAL
666 If you say yes here you get support for Linear Technology LTC4261
667 Negative Voltage Hot Swap Controller I2C interface.
669 This driver can also be built as a module. If so, the module will
672 config SENSORS_LM95241
673 tristate "National Semiconductor LM95241 sensor chip"
676 If you say yes here you get support for LM95241 sensor chip.
678 This driver can also be built as a module. If so, the module
679 will be called lm95241.
681 config SENSORS_MAX1111
682 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
683 depends on SPI_MASTER
685 Say y here to support Maxim's MAX1111 ADC chips.
687 This driver can also be built as a module. If so, the module
688 will be called max1111.
690 config SENSORS_MAX1619
691 tristate "Maxim MAX1619 sensor chip"
694 If you say yes here you get support for MAX1619 sensor chip.
696 This driver can also be built as a module. If so, the module
697 will be called max1619.
699 config SENSORS_MAX6639
700 tristate "Maxim MAX6639 sensor chip"
701 depends on I2C && EXPERIMENTAL
703 If you say yes here you get support for the MAX6639
706 This driver can also be built as a module. If so, the module
707 will be called max6639.
709 config SENSORS_MAX6650
710 tristate "Maxim MAX6650 sensor chip"
711 depends on I2C && EXPERIMENTAL
713 If you say yes here you get support for the MAX6650 / MAX6651
716 This driver can also be built as a module. If so, the module
717 will be called max6650.
719 config SENSORS_PC87360
720 tristate "National Semiconductor PC87360 family"
723 If you say yes here you get access to the hardware monitoring
724 functions of the National Semiconductor PC8736x Super-I/O chips.
725 The PC87360, PC87363 and PC87364 only have fan monitoring and
726 control. The PC87365 and PC87366 additionally have voltage and
727 temperature monitoring.
729 This driver can also be built as a module. If so, the module
730 will be called pc87360.
732 config SENSORS_PC87427
733 tristate "National Semiconductor PC87427"
735 If you say yes here you get access to the hardware monitoring
736 functions of the National Semiconductor PC87427 Super-I/O chip.
737 The chip has two distinct logical devices, one for fan speed
738 monitoring and control, and one for voltage and temperature
739 monitoring. Fan speed monitoring and control are supported, as
740 well as temperature monitoring. Voltages aren't supported yet.
742 This driver can also be built as a module. If so, the module
743 will be called pc87427.
745 config SENSORS_PCF8591
746 tristate "Philips PCF8591 ADC/DAC"
750 If you say yes here you get support for Philips PCF8591 4-channel
751 ADC, 1-channel DAC chips.
753 This driver can also be built as a module. If so, the module
754 will be called pcf8591.
756 These devices are hard to detect and rarely found on mainstream
757 hardware. If unsure, say N.
760 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
761 depends on GENERIC_GPIO
763 If you say yes here you get support for the Sensiron SHT10, SHT11,
764 SHT15, SHT71, SHT75 humidity and temperature sensors.
766 This driver can also be built as a module. If so, the module
767 will be called sht15.
770 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
773 If you say yes here you get support for the Sensiron SHT21, SHT25
774 humidity and temperature sensors.
776 This driver can also be built as a module. If so, the module
777 will be called sht21.
780 tristate "Samsung built-in ADC"
783 If you say yes here you get support for the on-board ADCs of
784 the Samsung S3C24XX, S3C64XX and other series of SoC
786 This driver can also be built as a module. If so, the module
787 will be called s3c-hwmon.
789 config SENSORS_S3C_RAW
790 bool "Include raw channel attributes in sysfs"
791 depends on SENSORS_S3C
793 Say Y here if you want to include raw copies of all the ADC
796 config SENSORS_SIS5595
797 tristate "Silicon Integrated Systems Corp. SiS5595"
800 If you say yes here you get support for the integrated sensors in
801 SiS5595 South Bridges.
803 This driver can also be built as a module. If so, the module
804 will be called sis5595.
806 config SENSORS_SMM665
807 tristate "Summit Microelectronics SMM665"
808 depends on I2C && EXPERIMENTAL
811 If you say yes here you get support for the hardware monitoring
812 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
813 Active DC Output Controller / Monitor.
815 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
816 Support for those chips is untested.
818 This driver can also be built as a module. If so, the module will
821 config SENSORS_DME1737
822 tristate "SMSC DME1737, SCH311x and compatibles"
823 depends on I2C && EXPERIMENTAL
826 If you say yes here you get support for the hardware monitoring
827 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
828 Asus A8000 Super-I/O chips.
830 This driver can also be built as a module. If so, the module
831 will be called dme1737.
833 config SENSORS_EMC1403
834 tristate "SMSC EMC1403/23 thermal sensor"
837 If you say yes here you get support for the SMSC EMC1403/23
838 temperature monitoring chip.
840 Threshold values can be configured using sysfs.
841 Data from the different diodes are accessible via sysfs.
843 config SENSORS_EMC2103
844 tristate "SMSC EMC2103"
847 If you say yes here you get support for the temperature
848 and fan sensors of the SMSC EMC2103 chips.
850 This driver can also be built as a module. If so, the module
851 will be called emc2103.
853 config SENSORS_SMSC47M1
854 tristate "SMSC LPC47M10x and compatibles"
856 If you say yes here you get support for the integrated fan
857 monitoring and control capabilities of the SMSC LPC47B27x,
858 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
859 LPC47M192, LPC47M292 and LPC47M997 chips.
861 The temperature and voltage sensor features of the LPC47M15x,
862 LPC47M192, LPC47M292 and LPC47M997 are supported by another
863 driver, select also "SMSC LPC47M192 and compatibles" below for
866 This driver can also be built as a module. If so, the module
867 will be called smsc47m1.
869 config SENSORS_SMSC47M192
870 tristate "SMSC LPC47M192 and compatibles"
874 If you say yes here you get support for the temperature and
875 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
878 The fan monitoring and control capabilities of these chips
879 are supported by another driver, select
880 "SMSC LPC47M10x and compatibles" above. You need both drivers
881 if you want fan control and voltage/temperature sensor support.
883 This driver can also be built as a module. If so, the module
884 will be called smsc47m192.
886 config SENSORS_SMSC47B397
887 tristate "SMSC LPC47B397-NC"
888 depends on EXPERIMENTAL
890 If you say yes here you get support for the SMSC LPC47B397-NC
893 This driver can also be built as a module. If so, the module
894 will be called smsc47b397.
896 config SENSORS_ADS7828
897 tristate "Texas Instruments ADS7828"
900 If you say yes here you get support for Texas Instruments ADS7828
901 12-bit 8-channel ADC device.
903 This driver can also be built as a module. If so, the module
904 will be called ads7828.
906 config SENSORS_ADS7871
907 tristate "Texas Instruments ADS7871 A/D converter"
910 If you say yes here you get support for TI ADS7871 & ADS7870
912 This driver can also be built as a module. If so, the module
913 will be called ads7871.
915 config SENSORS_AMC6821
916 tristate "Texas Instruments AMC6821"
917 depends on I2C && EXPERIMENTAL
919 If you say yes here you get support for the Texas Instruments
920 AMC6821 hardware monitoring chips.
922 This driver can also be build as a module. If so, the module
923 will be called amc6821.
925 config SENSORS_THMC50
926 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
929 If you say yes here you get support for Texas Instruments THMC50
930 sensor chips and clones: the Analog Devices ADM1022.
932 This driver can also be built as a module. If so, the module
933 will be called thmc50.
935 config SENSORS_TMP102
936 tristate "Texas Instruments TMP102"
937 depends on I2C && EXPERIMENTAL
939 If you say yes here you get support for Texas Instruments TMP102
942 This driver can also be built as a module. If so, the module
943 will be called tmp102.
945 config SENSORS_TMP401
946 tristate "Texas Instruments TMP401 and compatibles"
947 depends on I2C && EXPERIMENTAL
949 If you say yes here you get support for Texas Instruments TMP401 and
950 TMP411 temperature sensor chips.
952 This driver can also be built as a module. If so, the module
953 will be called tmp401.
955 config SENSORS_TMP421
956 tristate "Texas Instruments TMP421 and compatible"
957 depends on I2C && EXPERIMENTAL
959 If you say yes here you get support for Texas Instruments TMP421,
960 TMP422 and TMP423 temperature sensor chips.
962 This driver can also be built as a module. If so, the module
963 will be called tmp421.
965 config SENSORS_VIA_CPUTEMP
966 tristate "VIA CPU temperature sensor"
969 If you say yes here you get support for the temperature
970 sensor inside your CPU. Supported are all known variants of
973 config SENSORS_VIA686A
977 If you say yes here you get support for the integrated sensors in
978 Via 686A/B South Bridges.
980 This driver can also be built as a module. If so, the module
981 will be called via686a.
983 config SENSORS_VT1211
984 tristate "VIA VT1211"
987 If you say yes here then you get support for hardware monitoring
988 features of the VIA VT1211 Super-I/O chip.
990 This driver can also be built as a module. If so, the module
991 will be called vt1211.
993 config SENSORS_VT8231
994 tristate "VIA VT8231"
998 If you say yes here then you get support for the integrated sensors
999 in the VIA VT8231 device.
1001 This driver can also be built as a module. If so, the module
1002 will be called vt8231.
1004 config SENSORS_W83781D
1005 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1009 If you say yes here you get support for the Winbond W8378x series
1010 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1013 This driver can also be built as a module. If so, the module
1014 will be called w83781d.
1016 config SENSORS_W83791D
1017 tristate "Winbond W83791D"
1021 If you say yes here you get support for the Winbond W83791D chip.
1023 This driver can also be built as a module. If so, the module
1024 will be called w83791d.
1026 config SENSORS_W83792D
1027 tristate "Winbond W83792D"
1030 If you say yes here you get support for the Winbond W83792D chip.
1032 This driver can also be built as a module. If so, the module
1033 will be called w83792d.
1035 config SENSORS_W83793
1036 tristate "Winbond W83793"
1037 depends on I2C && EXPERIMENTAL
1040 If you say yes here you get support for the Winbond W83793
1041 hardware monitoring chip, including support for the integrated
1044 This driver can also be built as a module. If so, the module
1045 will be called w83793.
1047 config SENSORS_W83795
1048 tristate "Winbond/Nuvoton W83795G/ADG"
1049 depends on I2C && EXPERIMENTAL
1051 If you say yes here you get support for the Winbond W83795G and
1052 W83795ADG hardware monitoring chip.
1054 This driver can also be built as a module. If so, the module
1055 will be called w83795.
1057 config SENSORS_W83795_FANCTRL
1058 boolean "Include fan control support (DANGEROUS)"
1059 depends on SENSORS_W83795 && EXPERIMENTAL
1062 If you say yes here, support for the both manual and automatic
1063 fan control features will be included in the driver.
1065 This part of the code wasn't carefully reviewed and tested yet,
1066 so enabling this option is strongly discouraged on production
1067 servers. Only developers and testers should enable it for the
1070 Please also note that this option will create sysfs attribute
1071 files which may change in the future, so you shouldn't rely
1072 on them being stable.
1074 config SENSORS_W83L785TS
1075 tristate "Winbond W83L785TS-S"
1076 depends on I2C && EXPERIMENTAL
1078 If you say yes here you get support for the Winbond W83L785TS-S
1079 sensor chip, which is used on the Asus A7N8X, among other
1082 This driver can also be built as a module. If so, the module
1083 will be called w83l785ts.
1085 config SENSORS_W83L786NG
1086 tristate "Winbond W83L786NG, W83L786NR"
1087 depends on I2C && EXPERIMENTAL
1089 If you say yes here you get support for the Winbond W83L786NG
1090 and W83L786NR sensor chips.
1092 This driver can also be built as a module. If so, the module
1093 will be called w83l786ng.
1095 config SENSORS_W83627HF
1096 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1099 If you say yes here you get support for the Winbond W836X7 series
1100 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1103 This driver can also be built as a module. If so, the module
1104 will be called w83627hf.
1106 config SENSORS_W83627EHF
1107 tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
1110 If you say yes here you get support for the hardware
1111 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1113 This driver also supports the W83627EHG, which is the lead-free
1114 version of the W83627EHF, and the W83627DHG, which is a similar
1115 chip suited for specific Intel processors that use PECI such as
1118 This driver also supports the W83667HG chip.
1120 This driver can also be built as a module. If so, the module
1121 will be called w83627ehf.
1123 config SENSORS_WM831X
1124 tristate "WM831x PMICs"
1125 depends on MFD_WM831X
1127 If you say yes here you get support for the hardware
1128 monitoring functionality of the Wolfson Microelectronics
1129 WM831x series of PMICs.
1131 This driver can also be built as a module. If so, the module
1132 will be called wm831x-hwmon.
1134 config SENSORS_WM8350
1135 tristate "Wolfson Microelectronics WM835x"
1136 depends on MFD_WM8350
1138 If you say yes here you get support for the hardware
1139 monitoring features of the WM835x series of PMICs.
1141 This driver can also be built as a module. If so, the module
1142 will be called wm8350-hwmon.
1144 config SENSORS_ULTRA45
1145 tristate "Sun Ultra45 PIC16F747"
1148 This driver provides support for the Ultra45 workstation environmental
1151 config SENSORS_LIS3_SPI
1152 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1153 depends on !ACPI && SPI_MASTER && INPUT
1154 select INPUT_POLLDEV
1157 This driver provides support for the LIS3LV02Dx accelerometer connected
1158 via SPI. The accelerometer data is readable via
1159 /sys/devices/platform/lis3lv02d.
1161 This driver also provides an absolute input class device, allowing
1162 the laptop to act as a pinball machine-esque joystick.
1164 This driver can also be built as modules. If so, the core module
1165 will be called lis3lv02d and a specific module for the SPI transport
1166 is called lis3lv02d_spi.
1168 config SENSORS_LIS3_I2C
1169 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1170 depends on I2C && INPUT
1171 select INPUT_POLLDEV
1174 This driver provides support for the LIS3LV02Dx accelerometer connected
1175 via I2C. The accelerometer data is readable via
1176 /sys/devices/platform/lis3lv02d.
1178 This driver also provides an absolute input class device, allowing
1179 the device to act as a pinball machine-esque joystick.
1181 This driver can also be built as modules. If so, the core module
1182 will be called lis3lv02d and a specific module for the I2C transport
1183 is called lis3lv02d_i2c.
1185 config SENSORS_APPLESMC
1186 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1187 depends on INPUT && X86
1190 select INPUT_POLLDEV
1193 This driver provides support for the Apple System Management
1194 Controller, which provides an accelerometer (Apple Sudden Motion
1195 Sensor), light sensors, temperature sensors, keyboard backlight
1196 control and fan control.
1198 Only Intel-based Apple's computers are supported (MacBook Pro,
1201 Data from the different sensors, keyboard backlight control and fan
1202 control are accessible via sysfs.
1204 This driver also provides an absolute input class device, allowing
1205 the laptop to act as a pinball machine-esque joystick.
1207 Say Y here if you have an applicable laptop and want to experience
1208 the awesome power of applesmc.
1210 config SENSORS_MC13783_ADC
1211 tristate "Freescale MC13783 ADC"
1212 depends on MFD_MC13783
1214 Support for the A/D converter on MC13783 PMIC.
1218 comment "ACPI drivers"
1220 config SENSORS_ATK0110
1221 tristate "ASUS ATK0110"
1222 depends on X86 && EXPERIMENTAL
1224 If you say yes here you get support for the ACPI hardware
1225 monitoring interface found in many ASUS motherboards. This
1226 driver will provide readings of fans, voltages and temperatures
1227 through the system firmware.
1229 This driver can also be built as a module. If so, the module
1230 will be called asus_atk0110.
1232 config SENSORS_LIS3LV02D
1233 tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1235 select INPUT_POLLDEV
1240 This driver provides support for the LIS3* accelerometers, such as the
1241 LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1242 of HP laptops, which have the "Mobile Data Protection System 3D" or
1243 "3D DriveGuard" feature. On such systems the driver should load
1244 automatically (via ACPI alias). The accelerometer might also be found
1245 in other systems, connected via SPI or I2C. The accelerometer data is
1246 readable via /sys/devices/platform/lis3lv02d.
1248 This driver also provides an absolute input class device, allowing
1249 a laptop to act as a pinball machine-esque joystick. It provides also
1250 a misc device which can be used to detect free-fall. On HP laptops,
1251 if the led infrastructure is activated, support for a led indicating
1252 disk protection will be provided as hp::hddprotect. For more
1253 information on the feature, refer to Documentation/hwmon/lis3lv02d.
1255 This driver can also be built as modules. If so, the core module
1256 will be called lis3lv02d and a specific module for HP laptops will be
1259 Say Y here if you have an applicable laptop and want to experience
1260 the awesome power of lis3lv02d.