powercap: intel_rapl_tpmi: Enable PMU support
[linux-block.git] / drivers / gpu / drm / panel / panel-visionox-rm69299.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2019, The Linux Foundation. All rights reserved.
4  */
5
6 #include <linux/delay.h>
7 #include <linux/module.h>
8 #include <linux/mod_devicetable.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/regulator/consumer.h>
11
12 #include <video/mipi_display.h>
13
14 #include <drm/drm_mipi_dsi.h>
15 #include <drm/drm_modes.h>
16 #include <drm/drm_panel.h>
17
18 struct visionox_rm69299 {
19         struct drm_panel panel;
20         struct regulator_bulk_data supplies[2];
21         struct gpio_desc *reset_gpio;
22         struct mipi_dsi_device *dsi;
23 };
24
25 static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
26 {
27         return container_of(panel, struct visionox_rm69299, panel);
28 }
29
30 static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
31 {
32         int ret;
33
34         ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
35         if (ret < 0)
36                 return ret;
37
38         /*
39          * Reset sequence of visionox panel requires the panel to be
40          * out of reset for 10ms, followed by being held in reset
41          * for 10ms and then out again
42          */
43         gpiod_set_value(ctx->reset_gpio, 1);
44         usleep_range(10000, 20000);
45         gpiod_set_value(ctx->reset_gpio, 0);
46         usleep_range(10000, 20000);
47         gpiod_set_value(ctx->reset_gpio, 1);
48         usleep_range(10000, 20000);
49
50         return 0;
51 }
52
53 static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
54 {
55         gpiod_set_value(ctx->reset_gpio, 0);
56
57         return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
58 }
59
60 static int visionox_rm69299_unprepare(struct drm_panel *panel)
61 {
62         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
63         int ret;
64
65         ctx->dsi->mode_flags = 0;
66
67         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
68         if (ret < 0)
69                 dev_err(ctx->panel.dev, "set_display_off cmd failed ret = %d\n", ret);
70
71         /* 120ms delay required here as per DCS spec */
72         msleep(120);
73
74         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
75         if (ret < 0) {
76                 dev_err(ctx->panel.dev, "enter_sleep cmd failed ret = %d\n", ret);
77         }
78
79         ret = visionox_rm69299_power_off(ctx);
80
81         return ret;
82 }
83
84 static int visionox_rm69299_prepare(struct drm_panel *panel)
85 {
86         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
87         int ret;
88
89         ret = visionox_rm69299_power_on(ctx);
90         if (ret < 0)
91                 return ret;
92
93         ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
94
95         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
96         if (ret < 0) {
97                 dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
98                 goto power_off;
99         }
100
101         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
102         if (ret < 0) {
103                 dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
104                 goto power_off;
105         }
106
107         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
108         if (ret < 0) {
109                 dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
110                 goto power_off;
111         }
112
113         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
114         if (ret < 0) {
115                 dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
116                 goto power_off;
117         }
118
119         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
120         if (ret < 0) {
121                 dev_err(ctx->panel.dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
122                 goto power_off;
123         }
124
125         /* Per DSI spec wait 120ms after sending exit sleep DCS command */
126         msleep(120);
127
128         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
129         if (ret < 0) {
130                 dev_err(ctx->panel.dev, "set_display_on cmd failed ret = %d\n", ret);
131                 goto power_off;
132         }
133
134         /* Per DSI spec wait 120ms after sending set_display_on DCS command */
135         msleep(120);
136
137         return 0;
138
139 power_off:
140         return ret;
141 }
142
143 static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
144         .name = "1080x2248",
145         .clock = 158695,
146         .hdisplay = 1080,
147         .hsync_start = 1080 + 26,
148         .hsync_end = 1080 + 26 + 2,
149         .htotal = 1080 + 26 + 2 + 36,
150         .vdisplay = 2248,
151         .vsync_start = 2248 + 56,
152         .vsync_end = 2248 + 56 + 4,
153         .vtotal = 2248 + 56 + 4 + 4,
154         .flags = 0,
155 };
156
157 static int visionox_rm69299_get_modes(struct drm_panel *panel,
158                                       struct drm_connector *connector)
159 {
160         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
161         struct drm_display_mode *mode;
162
163         mode = drm_mode_duplicate(connector->dev,
164                                   &visionox_rm69299_1080x2248_60hz);
165         if (!mode) {
166                 dev_err(ctx->panel.dev, "failed to create a new display mode\n");
167                 return 0;
168         }
169
170         connector->display_info.width_mm = 74;
171         connector->display_info.height_mm = 131;
172         mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
173         drm_mode_probed_add(connector, mode);
174
175         return 1;
176 }
177
178 static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
179         .unprepare = visionox_rm69299_unprepare,
180         .prepare = visionox_rm69299_prepare,
181         .get_modes = visionox_rm69299_get_modes,
182 };
183
184 static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
185 {
186         struct device *dev = &dsi->dev;
187         struct visionox_rm69299 *ctx;
188         int ret;
189
190         ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
191         if (!ctx)
192                 return -ENOMEM;
193
194         mipi_dsi_set_drvdata(dsi, ctx);
195
196         ctx->panel.dev = dev;
197         ctx->dsi = dsi;
198
199         ctx->supplies[0].supply = "vdda";
200         ctx->supplies[1].supply = "vdd3p3";
201
202         ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
203                                       ctx->supplies);
204         if (ret < 0)
205                 return ret;
206
207         ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
208                                          "reset", GPIOD_OUT_LOW);
209         if (IS_ERR(ctx->reset_gpio)) {
210                 dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
211                 return PTR_ERR(ctx->reset_gpio);
212         }
213
214         drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
215                        DRM_MODE_CONNECTOR_DSI);
216         ctx->panel.dev = dev;
217         ctx->panel.funcs = &visionox_rm69299_drm_funcs;
218         drm_panel_add(&ctx->panel);
219
220         dsi->lanes = 4;
221         dsi->format = MIPI_DSI_FMT_RGB888;
222         dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
223                           MIPI_DSI_CLOCK_NON_CONTINUOUS;
224         ret = mipi_dsi_attach(dsi);
225         if (ret < 0) {
226                 dev_err(dev, "dsi attach failed ret = %d\n", ret);
227                 goto err_dsi_attach;
228         }
229
230         ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
231         if (ret) {
232                 dev_err(dev, "regulator set load failed for vdda supply ret = %d\n", ret);
233                 goto err_set_load;
234         }
235
236         ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
237         if (ret) {
238                 dev_err(dev, "regulator set load failed for vdd3p3 supply ret = %d\n", ret);
239                 goto err_set_load;
240         }
241
242         return 0;
243
244 err_set_load:
245         mipi_dsi_detach(dsi);
246 err_dsi_attach:
247         drm_panel_remove(&ctx->panel);
248         return ret;
249 }
250
251 static void visionox_rm69299_remove(struct mipi_dsi_device *dsi)
252 {
253         struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
254
255         mipi_dsi_detach(ctx->dsi);
256         mipi_dsi_device_unregister(ctx->dsi);
257
258         drm_panel_remove(&ctx->panel);
259 }
260
261 static const struct of_device_id visionox_rm69299_of_match[] = {
262         { .compatible = "visionox,rm69299-1080p-display", },
263         { /* sentinel */ }
264 };
265 MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
266
267 static struct mipi_dsi_driver visionox_rm69299_driver = {
268         .driver = {
269                 .name = "panel-visionox-rm69299",
270                 .of_match_table = visionox_rm69299_of_match,
271         },
272         .probe = visionox_rm69299_probe,
273         .remove = visionox_rm69299_remove,
274 };
275 module_mipi_dsi_driver(visionox_rm69299_driver);
276
277 MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");
278 MODULE_LICENSE("GPL v2");