hp-wmi: Remove GPS rfkill support via pre-2009 interface
[linux-2.6-block.git] / drivers / gpio / gpio-brcmstb.c
1 /*
2  * Copyright (C) 2015 Broadcom Corporation
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License as
6  * published by the Free Software Foundation version 2.
7  *
8  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
9  * kind, whether express or implied; without even the implied warranty
10  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  */
13
14 #include <linux/bitops.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/of_device.h>
17 #include <linux/of_irq.h>
18 #include <linux/module.h>
19 #include <linux/irqdomain.h>
20 #include <linux/irqchip/chained_irq.h>
21 #include <linux/interrupt.h>
22 #include <linux/reboot.h>
23
24 #define GIO_BANK_SIZE           0x20
25 #define GIO_ODEN(bank)          (((bank) * GIO_BANK_SIZE) + 0x00)
26 #define GIO_DATA(bank)          (((bank) * GIO_BANK_SIZE) + 0x04)
27 #define GIO_IODIR(bank)         (((bank) * GIO_BANK_SIZE) + 0x08)
28 #define GIO_EC(bank)            (((bank) * GIO_BANK_SIZE) + 0x0c)
29 #define GIO_EI(bank)            (((bank) * GIO_BANK_SIZE) + 0x10)
30 #define GIO_MASK(bank)          (((bank) * GIO_BANK_SIZE) + 0x14)
31 #define GIO_LEVEL(bank)         (((bank) * GIO_BANK_SIZE) + 0x18)
32 #define GIO_STAT(bank)          (((bank) * GIO_BANK_SIZE) + 0x1c)
33
34 struct brcmstb_gpio_bank {
35         struct list_head node;
36         int id;
37         struct gpio_chip gc;
38         struct brcmstb_gpio_priv *parent_priv;
39         u32 width;
40         struct irq_chip irq_chip;
41 };
42
43 struct brcmstb_gpio_priv {
44         struct list_head bank_list;
45         void __iomem *reg_base;
46         struct platform_device *pdev;
47         int parent_irq;
48         int gpio_base;
49         bool can_wake;
50         int parent_wake_irq;
51         struct notifier_block reboot_notifier;
52 };
53
54 #define MAX_GPIO_PER_BANK           32
55 #define GPIO_BANK(gpio)         ((gpio) >> 5)
56 /* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
57 #define GPIO_BIT(gpio)          ((gpio) & (MAX_GPIO_PER_BANK - 1))
58
59 static inline struct brcmstb_gpio_priv *
60 brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
61 {
62         struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
63         return bank->parent_priv;
64 }
65
66 static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
67                 unsigned int offset, bool enable)
68 {
69         struct gpio_chip *gc = &bank->gc;
70         struct brcmstb_gpio_priv *priv = bank->parent_priv;
71         u32 mask = gc->pin2mask(gc, offset);
72         u32 imask;
73         unsigned long flags;
74
75         spin_lock_irqsave(&gc->bgpio_lock, flags);
76         imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id));
77         if (enable)
78                 imask |= mask;
79         else
80                 imask &= ~mask;
81         gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
82         spin_unlock_irqrestore(&gc->bgpio_lock, flags);
83 }
84
85 /* -------------------- IRQ chip functions -------------------- */
86
87 static void brcmstb_gpio_irq_mask(struct irq_data *d)
88 {
89         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
90         struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
91
92         brcmstb_gpio_set_imask(bank, d->hwirq, false);
93 }
94
95 static void brcmstb_gpio_irq_unmask(struct irq_data *d)
96 {
97         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
98         struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
99
100         brcmstb_gpio_set_imask(bank, d->hwirq, true);
101 }
102
103 static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
104 {
105         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
106         struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
107         struct brcmstb_gpio_priv *priv = bank->parent_priv;
108         u32 mask = BIT(d->hwirq);
109         u32 edge_insensitive, iedge_insensitive;
110         u32 edge_config, iedge_config;
111         u32 level, ilevel;
112         unsigned long flags;
113
114         switch (type) {
115         case IRQ_TYPE_LEVEL_LOW:
116                 level = 0;
117                 edge_config = 0;
118                 edge_insensitive = 0;
119                 break;
120         case IRQ_TYPE_LEVEL_HIGH:
121                 level = mask;
122                 edge_config = 0;
123                 edge_insensitive = 0;
124                 break;
125         case IRQ_TYPE_EDGE_FALLING:
126                 level = 0;
127                 edge_config = 0;
128                 edge_insensitive = 0;
129                 break;
130         case IRQ_TYPE_EDGE_RISING:
131                 level = 0;
132                 edge_config = mask;
133                 edge_insensitive = 0;
134                 break;
135         case IRQ_TYPE_EDGE_BOTH:
136                 level = 0;
137                 edge_config = 0;  /* don't care, but want known value */
138                 edge_insensitive = mask;
139                 break;
140         default:
141                 return -EINVAL;
142         }
143
144         spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
145
146         iedge_config = bank->gc.read_reg(priv->reg_base +
147                         GIO_EC(bank->id)) & ~mask;
148         iedge_insensitive = bank->gc.read_reg(priv->reg_base +
149                         GIO_EI(bank->id)) & ~mask;
150         ilevel = bank->gc.read_reg(priv->reg_base +
151                         GIO_LEVEL(bank->id)) & ~mask;
152
153         bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id),
154                         iedge_config | edge_config);
155         bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id),
156                         iedge_insensitive | edge_insensitive);
157         bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
158                         ilevel | level);
159
160         spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
161         return 0;
162 }
163
164 static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
165                 unsigned int enable)
166 {
167         int ret = 0;
168
169         /*
170          * Only enable wake IRQ once for however many hwirqs can wake
171          * since they all use the same wake IRQ.  Mask will be set
172          * up appropriately thanks to IRQCHIP_MASK_ON_SUSPEND flag.
173          */
174         if (enable)
175                 ret = enable_irq_wake(priv->parent_wake_irq);
176         else
177                 ret = disable_irq_wake(priv->parent_wake_irq);
178         if (ret)
179                 dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
180                                 enable ? "enable" : "disable");
181         return ret;
182 }
183
184 static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
185 {
186         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
187         struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
188
189         return brcmstb_gpio_priv_set_wake(priv, enable);
190 }
191
192 static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
193 {
194         struct brcmstb_gpio_priv *priv = data;
195
196         if (!priv || irq != priv->parent_wake_irq)
197                 return IRQ_NONE;
198         pm_wakeup_event(&priv->pdev->dev, 0);
199         return IRQ_HANDLED;
200 }
201
202 static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
203 {
204         struct brcmstb_gpio_priv *priv = bank->parent_priv;
205         struct irq_domain *irq_domain = bank->gc.irqdomain;
206         void __iomem *reg_base = priv->reg_base;
207         unsigned long status;
208         unsigned long flags;
209
210         spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
211         while ((status = bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
212                          bank->gc.read_reg(reg_base + GIO_MASK(bank->id)))) {
213                 int bit;
214
215                 for_each_set_bit(bit, &status, 32) {
216                         u32 stat = bank->gc.read_reg(reg_base +
217                                                       GIO_STAT(bank->id));
218                         if (bit >= bank->width)
219                                 dev_warn(&priv->pdev->dev,
220                                          "IRQ for invalid GPIO (bank=%d, offset=%d)\n",
221                                          bank->id, bit);
222                         bank->gc.write_reg(reg_base + GIO_STAT(bank->id),
223                                             stat | BIT(bit));
224                         generic_handle_irq(irq_find_mapping(irq_domain, bit));
225                 }
226         }
227         spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
228 }
229
230 /* Each UPG GIO block has one IRQ for all banks */
231 static void brcmstb_gpio_irq_handler(struct irq_desc *desc)
232 {
233         struct gpio_chip *gc = irq_desc_get_handler_data(desc);
234         struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
235         struct irq_chip *chip = irq_desc_get_chip(desc);
236         struct list_head *pos;
237
238         /* Interrupts weren't properly cleared during probe */
239         BUG_ON(!priv || !chip);
240
241         chained_irq_enter(chip, desc);
242         list_for_each(pos, &priv->bank_list) {
243                 struct brcmstb_gpio_bank *bank =
244                         list_entry(pos, struct brcmstb_gpio_bank, node);
245                 brcmstb_gpio_irq_bank_handler(bank);
246         }
247         chained_irq_exit(chip, desc);
248 }
249
250 static int brcmstb_gpio_reboot(struct notifier_block *nb,
251                 unsigned long action, void *data)
252 {
253         struct brcmstb_gpio_priv *priv =
254                 container_of(nb, struct brcmstb_gpio_priv, reboot_notifier);
255
256         /* Enable GPIO for S5 cold boot */
257         if (action == SYS_POWER_OFF)
258                 brcmstb_gpio_priv_set_wake(priv, 1);
259
260         return NOTIFY_DONE;
261 }
262
263 /* Make sure that the number of banks matches up between properties */
264 static int brcmstb_gpio_sanity_check_banks(struct device *dev,
265                 struct device_node *np, struct resource *res)
266 {
267         int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
268         int num_banks =
269                 of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
270
271         if (res_num_banks != num_banks) {
272                 dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
273                                 res_num_banks, num_banks);
274                 return -EINVAL;
275         } else {
276                 return 0;
277         }
278 }
279
280 static int brcmstb_gpio_remove(struct platform_device *pdev)
281 {
282         struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
283         struct list_head *pos;
284         struct brcmstb_gpio_bank *bank;
285         int ret = 0;
286
287         if (!priv) {
288                 dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
289                 return -EFAULT;
290         }
291
292         /*
293          * You can lose return values below, but we report all errors, and it's
294          * more important to actually perform all of the steps.
295          */
296         list_for_each(pos, &priv->bank_list) {
297                 bank = list_entry(pos, struct brcmstb_gpio_bank, node);
298                 gpiochip_remove(&bank->gc);
299         }
300         if (priv->reboot_notifier.notifier_call) {
301                 ret = unregister_reboot_notifier(&priv->reboot_notifier);
302                 if (ret)
303                         dev_err(&pdev->dev,
304                                 "failed to unregister reboot notifier\n");
305         }
306         return ret;
307 }
308
309 static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
310                 const struct of_phandle_args *gpiospec, u32 *flags)
311 {
312         struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
313         struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
314         int offset;
315
316         if (gc->of_gpio_n_cells != 2) {
317                 WARN_ON(1);
318                 return -EINVAL;
319         }
320
321         if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
322                 return -EINVAL;
323
324         offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
325         if (offset >= gc->ngpio || offset < 0)
326                 return -EINVAL;
327
328         if (unlikely(offset >= bank->width)) {
329                 dev_warn_ratelimited(&priv->pdev->dev,
330                         "Received request for invalid GPIO offset %d\n",
331                         gpiospec->args[0]);
332         }
333
334         if (flags)
335                 *flags = gpiospec->args[1];
336
337         return offset;
338 }
339
340 /* Before calling, must have bank->parent_irq set and gpiochip registered */
341 static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
342                 struct brcmstb_gpio_bank *bank)
343 {
344         struct brcmstb_gpio_priv *priv = bank->parent_priv;
345         struct device *dev = &pdev->dev;
346         struct device_node *np = dev->of_node;
347
348         bank->irq_chip.name = dev_name(dev);
349         bank->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
350         bank->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
351         bank->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
352
353         /* Ensures that all non-wakeup IRQs are disabled at suspend */
354         bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
355
356         if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
357                         of_property_read_bool(np, "wakeup-source")) {
358                 priv->parent_wake_irq = platform_get_irq(pdev, 1);
359                 if (priv->parent_wake_irq < 0) {
360                         dev_warn(dev,
361                                 "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
362                 } else {
363                         int err;
364
365                         /*
366                          * Set wakeup capability before requesting wakeup
367                          * interrupt, so we can process boot-time "wakeups"
368                          * (e.g., from S5 cold boot)
369                          */
370                         device_set_wakeup_capable(dev, true);
371                         device_wakeup_enable(dev);
372                         err = devm_request_irq(dev, priv->parent_wake_irq,
373                                         brcmstb_gpio_wake_irq_handler, 0,
374                                         "brcmstb-gpio-wake", priv);
375
376                         if (err < 0) {
377                                 dev_err(dev, "Couldn't request wake IRQ");
378                                 return err;
379                         }
380
381                         priv->reboot_notifier.notifier_call =
382                                 brcmstb_gpio_reboot;
383                         register_reboot_notifier(&priv->reboot_notifier);
384                         priv->can_wake = true;
385                 }
386         }
387
388         if (priv->can_wake)
389                 bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
390
391         gpiochip_irqchip_add(&bank->gc, &bank->irq_chip, 0,
392                         handle_simple_irq, IRQ_TYPE_NONE);
393         gpiochip_set_chained_irqchip(&bank->gc, &bank->irq_chip,
394                         priv->parent_irq, brcmstb_gpio_irq_handler);
395
396         return 0;
397 }
398
399 static int brcmstb_gpio_probe(struct platform_device *pdev)
400 {
401         struct device *dev = &pdev->dev;
402         struct device_node *np = dev->of_node;
403         void __iomem *reg_base;
404         struct brcmstb_gpio_priv *priv;
405         struct resource *res;
406         struct property *prop;
407         const __be32 *p;
408         u32 bank_width;
409         int num_banks = 0;
410         int err;
411         static int gpio_base;
412         unsigned long flags = 0;
413
414         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
415         if (!priv)
416                 return -ENOMEM;
417         platform_set_drvdata(pdev, priv);
418         INIT_LIST_HEAD(&priv->bank_list);
419
420         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
421         reg_base = devm_ioremap_resource(dev, res);
422         if (IS_ERR(reg_base))
423                 return PTR_ERR(reg_base);
424
425         priv->gpio_base = gpio_base;
426         priv->reg_base = reg_base;
427         priv->pdev = pdev;
428
429         if (of_property_read_bool(np, "interrupt-controller")) {
430                 priv->parent_irq = platform_get_irq(pdev, 0);
431                 if (priv->parent_irq <= 0) {
432                         dev_err(dev, "Couldn't get IRQ");
433                         return -ENOENT;
434                 }
435         } else {
436                 priv->parent_irq = -ENOENT;
437         }
438
439         if (brcmstb_gpio_sanity_check_banks(dev, np, res))
440                 return -EINVAL;
441
442         /*
443          * MIPS endianness is configured by boot strap, which also reverses all
444          * bus endianness (i.e., big-endian CPU + big endian bus ==> native
445          * endian I/O).
446          *
447          * Other architectures (e.g., ARM) either do not support big endian, or
448          * else leave I/O in little endian mode.
449          */
450 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
451         flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
452 #endif
453
454         of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
455                         bank_width) {
456                 struct brcmstb_gpio_bank *bank;
457                 struct gpio_chip *gc;
458
459                 bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
460                 if (!bank) {
461                         err = -ENOMEM;
462                         goto fail;
463                 }
464
465                 bank->parent_priv = priv;
466                 bank->id = num_banks;
467                 if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
468                         dev_err(dev, "Invalid bank width %d\n", bank_width);
469                         goto fail;
470                 } else {
471                         bank->width = bank_width;
472                 }
473
474                 /*
475                  * Regs are 4 bytes wide, have data reg, no set/clear regs,
476                  * and direction bits have 0 = output and 1 = input
477                  */
478                 gc = &bank->gc;
479                 err = bgpio_init(gc, dev, 4,
480                                 reg_base + GIO_DATA(bank->id),
481                                 NULL, NULL, NULL,
482                                 reg_base + GIO_IODIR(bank->id), flags);
483                 if (err) {
484                         dev_err(dev, "bgpio_init() failed\n");
485                         goto fail;
486                 }
487
488                 gc->of_node = np;
489                 gc->owner = THIS_MODULE;
490                 gc->label = np->full_name;
491                 gc->base = gpio_base;
492                 gc->of_gpio_n_cells = 2;
493                 gc->of_xlate = brcmstb_gpio_of_xlate;
494                 /* not all ngpio lines are valid, will use bank width later */
495                 gc->ngpio = MAX_GPIO_PER_BANK;
496
497                 /*
498                  * Mask all interrupts by default, since wakeup interrupts may
499                  * be retained from S5 cold boot
500                  */
501                 gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
502
503                 err = gpiochip_add_data(gc, bank);
504                 if (err) {
505                         dev_err(dev, "Could not add gpiochip for bank %d\n",
506                                         bank->id);
507                         goto fail;
508                 }
509                 gpio_base += gc->ngpio;
510
511                 if (priv->parent_irq > 0) {
512                         err = brcmstb_gpio_irq_setup(pdev, bank);
513                         if (err)
514                                 goto fail;
515                 }
516
517                 dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
518                         gc->base, gc->ngpio, bank->width);
519
520                 /* Everything looks good, so add bank to list */
521                 list_add(&bank->node, &priv->bank_list);
522
523                 num_banks++;
524         }
525
526         dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
527                         num_banks, priv->gpio_base, gpio_base - 1);
528
529         return 0;
530
531 fail:
532         (void) brcmstb_gpio_remove(pdev);
533         return err;
534 }
535
536 static const struct of_device_id brcmstb_gpio_of_match[] = {
537         { .compatible = "brcm,brcmstb-gpio" },
538         {},
539 };
540
541 MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
542
543 static struct platform_driver brcmstb_gpio_driver = {
544         .driver = {
545                 .name = "brcmstb-gpio",
546                 .of_match_table = brcmstb_gpio_of_match,
547         },
548         .probe = brcmstb_gpio_probe,
549         .remove = brcmstb_gpio_remove,
550 };
551 module_platform_driver(brcmstb_gpio_driver);
552
553 MODULE_AUTHOR("Gregory Fong");
554 MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
555 MODULE_LICENSE("GPL v2");