drivers: max77843: Switch to common max77693 state container
[linux-block.git] / drivers / extcon / extcon-max77843.c
1 /*
2  * extcon-max77843.c - Maxim MAX77843 extcon driver to support
3  *                      MUIC(Micro USB Interface Controller)
4  *
5  * Copyright (C) 2015 Samsung Electronics
6  * Author: Jaewon Kim <jaewon02.kim@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/extcon.h>
15 #include <linux/i2c.h>
16 #include <linux/interrupt.h>
17 #include <linux/kernel.h>
18 #include <linux/mfd/max77693-common.h>
19 #include <linux/mfd/max77843-private.h>
20 #include <linux/module.h>
21 #include <linux/platform_device.h>
22 #include <linux/workqueue.h>
23
24 #define DELAY_MS_DEFAULT                15000   /* unit: millisecond */
25
26 enum max77843_muic_status {
27         MAX77843_MUIC_STATUS1 = 0,
28         MAX77843_MUIC_STATUS2,
29         MAX77843_MUIC_STATUS3,
30
31         MAX77843_MUIC_STATUS_NUM,
32 };
33
34 struct max77843_muic_info {
35         struct device *dev;
36         struct max77693_dev *max77843;
37         struct extcon_dev *edev;
38
39         struct mutex mutex;
40         struct work_struct irq_work;
41         struct delayed_work wq_detcable;
42
43         u8 status[MAX77843_MUIC_STATUS_NUM];
44         int prev_cable_type;
45         int prev_chg_type;
46         int prev_gnd_type;
47
48         bool irq_adc;
49         bool irq_chg;
50 };
51
52 enum max77843_muic_cable_group {
53         MAX77843_CABLE_GROUP_ADC = 0,
54         MAX77843_CABLE_GROUP_ADC_GND,
55         MAX77843_CABLE_GROUP_CHG,
56 };
57
58 enum max77843_muic_adc_debounce_time {
59         MAX77843_DEBOUNCE_TIME_5MS = 0,
60         MAX77843_DEBOUNCE_TIME_10MS,
61         MAX77843_DEBOUNCE_TIME_25MS,
62         MAX77843_DEBOUNCE_TIME_38_62MS,
63 };
64
65 /* Define accessory cable type */
66 enum max77843_muic_accessory_type {
67         MAX77843_MUIC_ADC_GROUND = 0,
68         MAX77843_MUIC_ADC_SEND_END_BUTTON,
69         MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
70         MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
71         MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
72         MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
73         MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
74         MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
75         MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
76         MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
77         MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
78         MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
79         MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
80         MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
81         MAX77843_MUIC_ADC_RESERVED_ACC_1,
82         MAX77843_MUIC_ADC_RESERVED_ACC_2,
83         MAX77843_MUIC_ADC_RESERVED_ACC_3,
84         MAX77843_MUIC_ADC_RESERVED_ACC_4,
85         MAX77843_MUIC_ADC_RESERVED_ACC_5,
86         MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
87         MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
88         MAX77843_MUIC_ADC_TTY_CONVERTER,
89         MAX77843_MUIC_ADC_UART_CABLE,
90         MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
91         MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
92         MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
93         MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
94         MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
95         MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
96         MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
97         MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
98         MAX77843_MUIC_ADC_OPEN,
99
100         /* The blow accessories should check
101            not only ADC value but also ADC1K and VBVolt value. */
102                                                 /* Offset|ADC1K|VBVolt| */
103         MAX77843_MUIC_GND_USB_HOST = 0x100,     /*    0x1|    0|     0| */
104         MAX77843_MUIC_GND_USB_HOST_VB = 0x101,  /*    0x1|    0|     1| */
105         MAX77843_MUIC_GND_MHL = 0x102,          /*    0x1|    1|     0| */
106         MAX77843_MUIC_GND_MHL_VB = 0x103,       /*    0x1|    1|     1| */
107 };
108
109 /* Define charger cable type */
110 enum max77843_muic_charger_type {
111         MAX77843_MUIC_CHG_NONE = 0,
112         MAX77843_MUIC_CHG_USB,
113         MAX77843_MUIC_CHG_DOWNSTREAM,
114         MAX77843_MUIC_CHG_DEDICATED,
115         MAX77843_MUIC_CHG_SPECIAL_500MA,
116         MAX77843_MUIC_CHG_SPECIAL_1A,
117         MAX77843_MUIC_CHG_SPECIAL_BIAS,
118         MAX77843_MUIC_CHG_RESERVED,
119         MAX77843_MUIC_CHG_GND,
120 };
121
122 static const unsigned int max77843_extcon_cable[] = {
123         EXTCON_USB,
124         EXTCON_USB_HOST,
125         EXTCON_TA,
126         EXTCON_CHARGE_DOWNSTREAM,
127         EXTCON_FAST_CHARGER,
128         EXTCON_SLOW_CHARGER,
129         EXTCON_MHL,
130         EXTCON_JIG,
131         EXTCON_NONE,
132 };
133
134 struct max77843_muic_irq {
135         unsigned int irq;
136         const char *name;
137         unsigned int virq;
138 };
139
140 static struct max77843_muic_irq max77843_muic_irqs[] = {
141         { MAX77843_MUIC_IRQ_INT1_ADC,           "MUIC-ADC" },
142         { MAX77843_MUIC_IRQ_INT1_ADCERROR,      "MUIC-ADC_ERROR" },
143         { MAX77843_MUIC_IRQ_INT1_ADC1K,         "MUIC-ADC1K" },
144         { MAX77843_MUIC_IRQ_INT2_CHGTYP,        "MUIC-CHGTYP" },
145         { MAX77843_MUIC_IRQ_INT2_CHGDETRUN,     "MUIC-CHGDETRUN" },
146         { MAX77843_MUIC_IRQ_INT2_DCDTMR,        "MUIC-DCDTMR" },
147         { MAX77843_MUIC_IRQ_INT2_DXOVP,         "MUIC-DXOVP" },
148         { MAX77843_MUIC_IRQ_INT2_VBVOLT,        "MUIC-VBVOLT" },
149         { MAX77843_MUIC_IRQ_INT3_VBADC,         "MUIC-VBADC" },
150         { MAX77843_MUIC_IRQ_INT3_VDNMON,        "MUIC-VDNMON" },
151         { MAX77843_MUIC_IRQ_INT3_DNRES,         "MUIC-DNRES" },
152         { MAX77843_MUIC_IRQ_INT3_MPNACK,        "MUIC-MPNACK"},
153         { MAX77843_MUIC_IRQ_INT3_MRXBUFOW,      "MUIC-MRXBUFOW"},
154         { MAX77843_MUIC_IRQ_INT3_MRXTRF,        "MUIC-MRXTRF"},
155         { MAX77843_MUIC_IRQ_INT3_MRXPERR,       "MUIC-MRXPERR"},
156         { MAX77843_MUIC_IRQ_INT3_MRXRDY,        "MUIC-MRXRDY"},
157 };
158
159 static const struct regmap_config max77843_muic_regmap_config = {
160         .reg_bits       = 8,
161         .val_bits       = 8,
162         .max_register   = MAX77843_MUIC_REG_END,
163 };
164
165 static const struct regmap_irq max77843_muic_irq[] = {
166         /* INT1 interrupt */
167         { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
168         { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
169         { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
170
171         /* INT2 interrupt */
172         { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
173         { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
174         { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
175         { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
176         { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
177
178         /* INT3 interrupt */
179         { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
180         { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
181         { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
182         { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
183         { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
184         { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
185         { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
186         { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
187 };
188
189 static const struct regmap_irq_chip max77843_muic_irq_chip = {
190         .name           = "max77843-muic",
191         .status_base    = MAX77843_MUIC_REG_INT1,
192         .mask_base      = MAX77843_MUIC_REG_INTMASK1,
193         .mask_invert    = true,
194         .num_regs       = 3,
195         .irqs           = max77843_muic_irq,
196         .num_irqs       = ARRAY_SIZE(max77843_muic_irq),
197 };
198
199 static int max77843_muic_set_path(struct max77843_muic_info *info,
200                 u8 val, bool attached)
201 {
202         struct max77693_dev *max77843 = info->max77843;
203         int ret = 0;
204         unsigned int ctrl1, ctrl2;
205
206         if (attached)
207                 ctrl1 = val;
208         else
209                 ctrl1 = CONTROL1_SW_OPEN;
210
211         ret = regmap_update_bits(max77843->regmap_muic,
212                         MAX77843_MUIC_REG_CONTROL1,
213                         CONTROL1_COM_SW, ctrl1);
214         if (ret < 0) {
215                 dev_err(info->dev, "Cannot switch MUIC port\n");
216                 return ret;
217         }
218
219         if (attached)
220                 ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
221         else
222                 ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
223
224         ret = regmap_update_bits(max77843->regmap_muic,
225                         MAX77843_MUIC_REG_CONTROL2,
226                         MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
227                         MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
228         if (ret < 0) {
229                 dev_err(info->dev, "Cannot update lowpower mode\n");
230                 return ret;
231         }
232
233         dev_dbg(info->dev,
234                 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
235                 ctrl1, ctrl2, attached ? "attached" : "detached");
236
237         return 0;
238 }
239
240 static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
241                 enum max77843_muic_cable_group group, bool *attached)
242 {
243         int adc, chg_type, cable_type, gnd_type;
244
245         adc = info->status[MAX77843_MUIC_STATUS1] &
246                         MAX77843_MUIC_STATUS1_ADC_MASK;
247         adc >>= STATUS1_ADC_SHIFT;
248
249         switch (group) {
250         case MAX77843_CABLE_GROUP_ADC:
251                 if (adc == MAX77843_MUIC_ADC_OPEN) {
252                         *attached = false;
253                         cable_type = info->prev_cable_type;
254                         info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
255                 } else {
256                         *attached = true;
257                         cable_type = info->prev_cable_type = adc;
258                 }
259                 break;
260         case MAX77843_CABLE_GROUP_CHG:
261                 chg_type = info->status[MAX77843_MUIC_STATUS2] &
262                                 MAX77843_MUIC_STATUS2_CHGTYP_MASK;
263
264                 /* Check GROUND accessory with charger cable */
265                 if (adc == MAX77843_MUIC_ADC_GROUND) {
266                         if (chg_type == MAX77843_MUIC_CHG_NONE) {
267                                 /* The following state when charger cable is
268                                  * disconnected but the GROUND accessory still
269                                  * connected */
270                                 *attached = false;
271                                 cable_type = info->prev_chg_type;
272                                 info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
273                         } else {
274
275                                 /* The following state when charger cable is
276                                  * connected on the GROUND accessory */
277                                 *attached = true;
278                                 cable_type = MAX77843_MUIC_CHG_GND;
279                                 info->prev_chg_type = MAX77843_MUIC_CHG_GND;
280                         }
281                         break;
282                 }
283
284                 if (chg_type == MAX77843_MUIC_CHG_NONE) {
285                         *attached = false;
286                         cable_type = info->prev_chg_type;
287                         info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
288                 } else {
289                         *attached = true;
290                         cable_type = info->prev_chg_type = chg_type;
291                 }
292                 break;
293         case MAX77843_CABLE_GROUP_ADC_GND:
294                 if (adc == MAX77843_MUIC_ADC_OPEN) {
295                         *attached = false;
296                         cable_type = info->prev_gnd_type;
297                         info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
298                 } else {
299                         *attached = true;
300
301                         /* Offset|ADC1K|VBVolt|
302                          *    0x1|    0|     0| USB-HOST
303                          *    0x1|    0|     1| USB-HOST with VB
304                          *    0x1|    1|     0| MHL
305                          *    0x1|    1|     1| MHL with VB */
306                         /* Get ADC1K register bit */
307                         gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
308                                         MAX77843_MUIC_STATUS1_ADC1K_MASK);
309
310                         /* Get VBVolt register bit */
311                         gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
312                                         MAX77843_MUIC_STATUS2_VBVOLT_MASK);
313                         gnd_type >>= STATUS2_VBVOLT_SHIFT;
314
315                         /* Offset of GND cable */
316                         gnd_type |= MAX77843_MUIC_GND_USB_HOST;
317                         cable_type = info->prev_gnd_type = gnd_type;
318                 }
319                 break;
320         default:
321                 dev_err(info->dev, "Unknown cable group (%d)\n", group);
322                 cable_type = -EINVAL;
323                 break;
324         }
325
326         return cable_type;
327 }
328
329 static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
330 {
331         int ret, gnd_cable_type;
332         bool attached;
333
334         gnd_cable_type = max77843_muic_get_cable_type(info,
335                         MAX77843_CABLE_GROUP_ADC_GND, &attached);
336         dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
337                         attached ? "attached" : "detached", gnd_cable_type);
338
339         switch (gnd_cable_type) {
340         case MAX77843_MUIC_GND_USB_HOST:
341         case MAX77843_MUIC_GND_USB_HOST_VB:
342                 ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
343                 if (ret < 0)
344                         return ret;
345
346                 extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
347                 break;
348         case MAX77843_MUIC_GND_MHL_VB:
349         case MAX77843_MUIC_GND_MHL:
350                 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
351                 if (ret < 0)
352                         return ret;
353
354                 extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
355                 break;
356         default:
357                 dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
358                         attached ? "attached" : "detached", gnd_cable_type);
359                 return -EINVAL;
360         }
361
362         return 0;
363 }
364
365 static int max77843_muic_jig_handler(struct max77843_muic_info *info,
366                 int cable_type, bool attached)
367 {
368         int ret;
369         u8 path = CONTROL1_SW_OPEN;
370
371         dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
372                         attached ? "attached" : "detached", cable_type);
373
374         switch (cable_type) {
375         case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
376         case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
377                 path = CONTROL1_SW_USB;
378                 break;
379         case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
380                 path = CONTROL1_SW_UART;
381                 break;
382         default:
383                 return -EINVAL;
384         }
385
386         ret = max77843_muic_set_path(info, path, attached);
387         if (ret < 0)
388                 return ret;
389
390         extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
391
392         return 0;
393 }
394
395 static int max77843_muic_adc_handler(struct max77843_muic_info *info)
396 {
397         int ret, cable_type;
398         bool attached;
399
400         cable_type = max77843_muic_get_cable_type(info,
401                         MAX77843_CABLE_GROUP_ADC, &attached);
402
403         dev_dbg(info->dev,
404                 "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
405                 attached ? "attached" : "detached", cable_type,
406                 info->prev_cable_type);
407
408         switch (cable_type) {
409         case MAX77843_MUIC_ADC_GROUND:
410                 ret = max77843_muic_adc_gnd_handler(info);
411                 if (ret < 0)
412                         return ret;
413                 break;
414         case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
415         case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
416         case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
417                 ret = max77843_muic_jig_handler(info, cable_type, attached);
418                 if (ret < 0)
419                         return ret;
420                 break;
421         case MAX77843_MUIC_ADC_SEND_END_BUTTON:
422         case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
423         case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
424         case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
425         case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
426         case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
427         case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
428         case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
429         case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
430         case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
431         case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
432         case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
433         case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
434         case MAX77843_MUIC_ADC_RESERVED_ACC_1:
435         case MAX77843_MUIC_ADC_RESERVED_ACC_2:
436         case MAX77843_MUIC_ADC_RESERVED_ACC_3:
437         case MAX77843_MUIC_ADC_RESERVED_ACC_4:
438         case MAX77843_MUIC_ADC_RESERVED_ACC_5:
439         case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
440         case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
441         case MAX77843_MUIC_ADC_TTY_CONVERTER:
442         case MAX77843_MUIC_ADC_UART_CABLE:
443         case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
444         case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
445         case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
446         case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
447         case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
448         case MAX77843_MUIC_ADC_OPEN:
449                 dev_err(info->dev,
450                         "accessory is %s but it isn't used (adc:0x%x)\n",
451                         attached ? "attached" : "detached", cable_type);
452                 return -EAGAIN;
453         default:
454                 dev_err(info->dev,
455                         "failed to detect %s accessory (adc:0x%x)\n",
456                         attached ? "attached" : "detached", cable_type);
457                 return -EINVAL;
458         }
459
460         return 0;
461 }
462
463 static int max77843_muic_chg_handler(struct max77843_muic_info *info)
464 {
465         int ret, chg_type, gnd_type;
466         bool attached;
467
468         chg_type = max77843_muic_get_cable_type(info,
469                         MAX77843_CABLE_GROUP_CHG, &attached);
470
471         dev_dbg(info->dev,
472                 "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
473                 attached ? "attached" : "detached",
474                 chg_type, info->prev_chg_type);
475
476         switch (chg_type) {
477         case MAX77843_MUIC_CHG_USB:
478                 ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
479                 if (ret < 0)
480                         return ret;
481
482                 extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
483                 break;
484         case MAX77843_MUIC_CHG_DOWNSTREAM:
485                 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
486                 if (ret < 0)
487                         return ret;
488
489                 extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
490                                         attached);
491                 break;
492         case MAX77843_MUIC_CHG_DEDICATED:
493                 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
494                 if (ret < 0)
495                         return ret;
496
497                 extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
498                 break;
499         case MAX77843_MUIC_CHG_SPECIAL_500MA:
500                 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
501                 if (ret < 0)
502                         return ret;
503
504                 extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
505                                         attached);
506                 break;
507         case MAX77843_MUIC_CHG_SPECIAL_1A:
508                 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
509                 if (ret < 0)
510                         return ret;
511
512                 extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
513                                         attached);
514                 break;
515         case MAX77843_MUIC_CHG_GND:
516                 gnd_type = max77843_muic_get_cable_type(info,
517                                 MAX77843_CABLE_GROUP_ADC_GND, &attached);
518
519                 /* Charger cable on MHL accessory is attach or detach */
520                 if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
521                         extcon_set_cable_state_(info->edev, EXTCON_TA, true);
522                 else if (gnd_type == MAX77843_MUIC_GND_MHL)
523                         extcon_set_cable_state_(info->edev, EXTCON_TA, false);
524                 break;
525         case MAX77843_MUIC_CHG_NONE:
526                 break;
527         default:
528                 dev_err(info->dev,
529                         "failed to detect %s accessory (chg_type:0x%x)\n",
530                         attached ? "attached" : "detached", chg_type);
531
532                 max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
533                 return -EINVAL;
534         }
535
536         return 0;
537 }
538
539 static void max77843_muic_irq_work(struct work_struct *work)
540 {
541         struct max77843_muic_info *info = container_of(work,
542                         struct max77843_muic_info, irq_work);
543         struct max77693_dev *max77843 = info->max77843;
544         int ret = 0;
545
546         mutex_lock(&info->mutex);
547
548         ret = regmap_bulk_read(max77843->regmap_muic,
549                         MAX77843_MUIC_REG_STATUS1, info->status,
550                         MAX77843_MUIC_STATUS_NUM);
551         if (ret) {
552                 dev_err(info->dev, "Cannot read STATUS registers\n");
553                 mutex_unlock(&info->mutex);
554                 return;
555         }
556
557         if (info->irq_adc) {
558                 ret = max77843_muic_adc_handler(info);
559                 if (ret)
560                         dev_err(info->dev, "Unknown cable type\n");
561                 info->irq_adc = false;
562         }
563
564         if (info->irq_chg) {
565                 ret = max77843_muic_chg_handler(info);
566                 if (ret)
567                         dev_err(info->dev, "Unknown charger type\n");
568                 info->irq_chg = false;
569         }
570
571         mutex_unlock(&info->mutex);
572 }
573
574 static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
575 {
576         struct max77843_muic_info *info = data;
577         int i, irq_type = -1;
578
579         for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
580                 if (irq == max77843_muic_irqs[i].virq)
581                         irq_type = max77843_muic_irqs[i].irq;
582
583         switch (irq_type) {
584         case MAX77843_MUIC_IRQ_INT1_ADC:
585         case MAX77843_MUIC_IRQ_INT1_ADCERROR:
586         case MAX77843_MUIC_IRQ_INT1_ADC1K:
587                 info->irq_adc = true;
588                 break;
589         case MAX77843_MUIC_IRQ_INT2_CHGTYP:
590         case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
591         case MAX77843_MUIC_IRQ_INT2_DCDTMR:
592         case MAX77843_MUIC_IRQ_INT2_DXOVP:
593         case MAX77843_MUIC_IRQ_INT2_VBVOLT:
594                 info->irq_chg = true;
595                 break;
596         case MAX77843_MUIC_IRQ_INT3_VBADC:
597         case MAX77843_MUIC_IRQ_INT3_VDNMON:
598         case MAX77843_MUIC_IRQ_INT3_DNRES:
599         case MAX77843_MUIC_IRQ_INT3_MPNACK:
600         case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
601         case MAX77843_MUIC_IRQ_INT3_MRXTRF:
602         case MAX77843_MUIC_IRQ_INT3_MRXPERR:
603         case MAX77843_MUIC_IRQ_INT3_MRXRDY:
604                 break;
605         default:
606                 dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
607                 break;
608         }
609
610         schedule_work(&info->irq_work);
611
612         return IRQ_HANDLED;
613 }
614
615 static void max77843_muic_detect_cable_wq(struct work_struct *work)
616 {
617         struct max77843_muic_info *info = container_of(to_delayed_work(work),
618                         struct max77843_muic_info, wq_detcable);
619         struct max77693_dev *max77843 = info->max77843;
620         int chg_type, adc, ret;
621         bool attached;
622
623         mutex_lock(&info->mutex);
624
625         ret = regmap_bulk_read(max77843->regmap_muic,
626                         MAX77843_MUIC_REG_STATUS1, info->status,
627                         MAX77843_MUIC_STATUS_NUM);
628         if (ret) {
629                 dev_err(info->dev, "Cannot read STATUS registers\n");
630                 goto err_cable_wq;
631         }
632
633         adc = max77843_muic_get_cable_type(info,
634                         MAX77843_CABLE_GROUP_ADC, &attached);
635         if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
636                 ret = max77843_muic_adc_handler(info);
637                 if (ret < 0) {
638                         dev_err(info->dev, "Cannot detect accessory\n");
639                         goto err_cable_wq;
640                 }
641         }
642
643         chg_type = max77843_muic_get_cable_type(info,
644                         MAX77843_CABLE_GROUP_CHG, &attached);
645         if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
646                 ret = max77843_muic_chg_handler(info);
647                 if (ret < 0) {
648                         dev_err(info->dev, "Cannot detect charger accessory\n");
649                         goto err_cable_wq;
650                 }
651         }
652
653 err_cable_wq:
654         mutex_unlock(&info->mutex);
655 }
656
657 static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
658                 enum max77843_muic_adc_debounce_time time)
659 {
660         struct max77693_dev *max77843 = info->max77843;
661         int ret;
662
663         switch (time) {
664         case MAX77843_DEBOUNCE_TIME_5MS:
665         case MAX77843_DEBOUNCE_TIME_10MS:
666         case MAX77843_DEBOUNCE_TIME_25MS:
667         case MAX77843_DEBOUNCE_TIME_38_62MS:
668                 ret = regmap_update_bits(max77843->regmap_muic,
669                                 MAX77843_MUIC_REG_CONTROL4,
670                                 MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
671                                 time << CONTROL4_ADCDBSET_SHIFT);
672                 if (ret < 0) {
673                         dev_err(info->dev, "Cannot write MUIC regmap\n");
674                         return ret;
675                 }
676                 break;
677         default:
678                 dev_err(info->dev, "Invalid ADC debounce time\n");
679                 return -EINVAL;
680         }
681
682         return 0;
683 }
684
685 static int max77843_init_muic_regmap(struct max77693_dev *max77843)
686 {
687         int ret;
688
689         max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
690                         I2C_ADDR_MUIC);
691         if (!max77843->i2c_muic) {
692                 dev_err(&max77843->i2c->dev,
693                                 "Cannot allocate I2C device for MUIC\n");
694                 return -ENOMEM;
695         }
696
697         i2c_set_clientdata(max77843->i2c_muic, max77843);
698
699         max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
700                         &max77843_muic_regmap_config);
701         if (IS_ERR(max77843->regmap_muic)) {
702                 ret = PTR_ERR(max77843->regmap_muic);
703                 goto err_muic_i2c;
704         }
705
706         ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
707                         IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
708                         0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
709         if (ret < 0) {
710                 dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
711                 goto err_muic_i2c;
712         }
713
714         return 0;
715
716 err_muic_i2c:
717         i2c_unregister_device(max77843->i2c_muic);
718
719         return ret;
720 }
721
722 static int max77843_muic_probe(struct platform_device *pdev)
723 {
724         struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
725         struct max77843_muic_info *info;
726         unsigned int id;
727         int i, ret;
728
729         info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
730         if (!info)
731                 return -ENOMEM;
732
733         info->dev = &pdev->dev;
734         info->max77843 = max77843;
735
736         platform_set_drvdata(pdev, info);
737         mutex_init(&info->mutex);
738
739         /* Initialize i2c and regmap */
740         ret = max77843_init_muic_regmap(max77843);
741         if (ret) {
742                 dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
743                 return ret;
744         }
745
746         /* Turn off auto detection configuration */
747         ret = regmap_update_bits(max77843->regmap_muic,
748                         MAX77843_MUIC_REG_CONTROL4,
749                         MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
750                         MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
751                         CONTROL4_AUTO_DISABLE);
752
753         /* Initialize extcon device */
754         info->edev = devm_extcon_dev_allocate(&pdev->dev,
755                         max77843_extcon_cable);
756         if (IS_ERR(info->edev)) {
757                 dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
758                 ret = -ENODEV;
759                 goto err_muic_irq;
760         }
761
762         ret = devm_extcon_dev_register(&pdev->dev, info->edev);
763         if (ret) {
764                 dev_err(&pdev->dev, "Failed to register extcon device\n");
765                 goto err_muic_irq;
766         }
767
768         /* Set ADC debounce time */
769         max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
770
771         /* Set initial path for UART */
772         max77843_muic_set_path(info, CONTROL1_SW_UART, true);
773
774         /* Check revision number of MUIC device */
775         ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
776         if (ret < 0) {
777                 dev_err(&pdev->dev, "Failed to read revision number\n");
778                 goto err_muic_irq;
779         }
780         dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
781
782         /* Support virtual irq domain for max77843 MUIC device */
783         INIT_WORK(&info->irq_work, max77843_muic_irq_work);
784
785         for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
786                 struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
787                 unsigned int virq = 0;
788
789                 virq = regmap_irq_get_virq(max77843->irq_data_muic,
790                                 muic_irq->irq);
791                 if (virq <= 0) {
792                         ret = -EINVAL;
793                         goto err_muic_irq;
794                 }
795                 muic_irq->virq = virq;
796
797                 ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
798                                 max77843_muic_irq_handler, IRQF_NO_SUSPEND,
799                                 muic_irq->name, info);
800                 if (ret) {
801                         dev_err(&pdev->dev,
802                                 "Failed to request irq (IRQ: %d, error: %d)\n",
803                                 muic_irq->irq, ret);
804                         goto err_muic_irq;
805                 }
806         }
807
808         /* Detect accessory after completing the initialization of platform */
809         INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
810         queue_delayed_work(system_power_efficient_wq,
811                         &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
812
813         return 0;
814
815 err_muic_irq:
816         regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
817         i2c_unregister_device(max77843->i2c_muic);
818
819         return ret;
820 }
821
822 static int max77843_muic_remove(struct platform_device *pdev)
823 {
824         struct max77843_muic_info *info = platform_get_drvdata(pdev);
825         struct max77693_dev *max77843 = info->max77843;
826
827         cancel_work_sync(&info->irq_work);
828         regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
829         i2c_unregister_device(max77843->i2c_muic);
830
831         return 0;
832 }
833
834 static const struct platform_device_id max77843_muic_id[] = {
835         { "max77843-muic", },
836         { /* sentinel */ },
837 };
838 MODULE_DEVICE_TABLE(platform, max77843_muic_id);
839
840 static struct platform_driver max77843_muic_driver = {
841         .driver         = {
842                 .name           = "max77843-muic",
843         },
844         .probe          = max77843_muic_probe,
845         .remove         = max77843_muic_remove,
846         .id_table       = max77843_muic_id,
847 };
848
849 static int __init max77843_muic_init(void)
850 {
851         return platform_driver_register(&max77843_muic_driver);
852 }
853 subsys_initcall(max77843_muic_init);
854
855 MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
856 MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
857 MODULE_LICENSE("GPL");