Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-2.6-block.git] / drivers / dma / pl330.c
1 /*
2  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3  *              http://www.samsung.com
4  *
5  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6  *      Jaswinder Singh <jassi.brar@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
30 #include <linux/pm_runtime.h>
31
32 #include "dmaengine.h"
33 #define PL330_MAX_CHAN          8
34 #define PL330_MAX_IRQS          32
35 #define PL330_MAX_PERI          32
36 #define PL330_MAX_BURST         16
37
38 #define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
39
40 enum pl330_cachectrl {
41         CCTRL0,         /* Noncacheable and nonbufferable */
42         CCTRL1,         /* Bufferable only */
43         CCTRL2,         /* Cacheable, but do not allocate */
44         CCTRL3,         /* Cacheable and bufferable, but do not allocate */
45         INVALID1,       /* AWCACHE = 0x1000 */
46         INVALID2,
47         CCTRL6,         /* Cacheable write-through, allocate on writes only */
48         CCTRL7,         /* Cacheable write-back, allocate on writes only */
49 };
50
51 enum pl330_byteswap {
52         SWAP_NO,
53         SWAP_2,
54         SWAP_4,
55         SWAP_8,
56         SWAP_16,
57 };
58
59 /* Register and Bit field Definitions */
60 #define DS                      0x0
61 #define DS_ST_STOP              0x0
62 #define DS_ST_EXEC              0x1
63 #define DS_ST_CMISS             0x2
64 #define DS_ST_UPDTPC            0x3
65 #define DS_ST_WFE               0x4
66 #define DS_ST_ATBRR             0x5
67 #define DS_ST_QBUSY             0x6
68 #define DS_ST_WFP               0x7
69 #define DS_ST_KILL              0x8
70 #define DS_ST_CMPLT             0x9
71 #define DS_ST_FLTCMP            0xe
72 #define DS_ST_FAULT             0xf
73
74 #define DPC                     0x4
75 #define INTEN                   0x20
76 #define ES                      0x24
77 #define INTSTATUS               0x28
78 #define INTCLR                  0x2c
79 #define FSM                     0x30
80 #define FSC                     0x34
81 #define FTM                     0x38
82
83 #define _FTC                    0x40
84 #define FTC(n)                  (_FTC + (n)*0x4)
85
86 #define _CS                     0x100
87 #define CS(n)                   (_CS + (n)*0x8)
88 #define CS_CNS                  (1 << 21)
89
90 #define _CPC                    0x104
91 #define CPC(n)                  (_CPC + (n)*0x8)
92
93 #define _SA                     0x400
94 #define SA(n)                   (_SA + (n)*0x20)
95
96 #define _DA                     0x404
97 #define DA(n)                   (_DA + (n)*0x20)
98
99 #define _CC                     0x408
100 #define CC(n)                   (_CC + (n)*0x20)
101
102 #define CC_SRCINC               (1 << 0)
103 #define CC_DSTINC               (1 << 14)
104 #define CC_SRCPRI               (1 << 8)
105 #define CC_DSTPRI               (1 << 22)
106 #define CC_SRCNS                (1 << 9)
107 #define CC_DSTNS                (1 << 23)
108 #define CC_SRCIA                (1 << 10)
109 #define CC_DSTIA                (1 << 24)
110 #define CC_SRCBRSTLEN_SHFT      4
111 #define CC_DSTBRSTLEN_SHFT      18
112 #define CC_SRCBRSTSIZE_SHFT     1
113 #define CC_DSTBRSTSIZE_SHFT     15
114 #define CC_SRCCCTRL_SHFT        11
115 #define CC_SRCCCTRL_MASK        0x7
116 #define CC_DSTCCTRL_SHFT        25
117 #define CC_DRCCCTRL_MASK        0x7
118 #define CC_SWAP_SHFT            28
119
120 #define _LC0                    0x40c
121 #define LC0(n)                  (_LC0 + (n)*0x20)
122
123 #define _LC1                    0x410
124 #define LC1(n)                  (_LC1 + (n)*0x20)
125
126 #define DBGSTATUS               0xd00
127 #define DBG_BUSY                (1 << 0)
128
129 #define DBGCMD                  0xd04
130 #define DBGINST0                0xd08
131 #define DBGINST1                0xd0c
132
133 #define CR0                     0xe00
134 #define CR1                     0xe04
135 #define CR2                     0xe08
136 #define CR3                     0xe0c
137 #define CR4                     0xe10
138 #define CRD                     0xe14
139
140 #define PERIPH_ID               0xfe0
141 #define PERIPH_REV_SHIFT        20
142 #define PERIPH_REV_MASK         0xf
143 #define PERIPH_REV_R0P0         0
144 #define PERIPH_REV_R1P0         1
145 #define PERIPH_REV_R1P1         2
146
147 #define CR0_PERIPH_REQ_SET      (1 << 0)
148 #define CR0_BOOT_EN_SET         (1 << 1)
149 #define CR0_BOOT_MAN_NS         (1 << 2)
150 #define CR0_NUM_CHANS_SHIFT     4
151 #define CR0_NUM_CHANS_MASK      0x7
152 #define CR0_NUM_PERIPH_SHIFT    12
153 #define CR0_NUM_PERIPH_MASK     0x1f
154 #define CR0_NUM_EVENTS_SHIFT    17
155 #define CR0_NUM_EVENTS_MASK     0x1f
156
157 #define CR1_ICACHE_LEN_SHIFT    0
158 #define CR1_ICACHE_LEN_MASK     0x7
159 #define CR1_NUM_ICACHELINES_SHIFT       4
160 #define CR1_NUM_ICACHELINES_MASK        0xf
161
162 #define CRD_DATA_WIDTH_SHIFT    0
163 #define CRD_DATA_WIDTH_MASK     0x7
164 #define CRD_WR_CAP_SHIFT        4
165 #define CRD_WR_CAP_MASK         0x7
166 #define CRD_WR_Q_DEP_SHIFT      8
167 #define CRD_WR_Q_DEP_MASK       0xf
168 #define CRD_RD_CAP_SHIFT        12
169 #define CRD_RD_CAP_MASK         0x7
170 #define CRD_RD_Q_DEP_SHIFT      16
171 #define CRD_RD_Q_DEP_MASK       0xf
172 #define CRD_DATA_BUFF_SHIFT     20
173 #define CRD_DATA_BUFF_MASK      0x3ff
174
175 #define PART                    0x330
176 #define DESIGNER                0x41
177 #define REVISION                0x0
178 #define INTEG_CFG               0x0
179 #define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
180
181 #define PL330_STATE_STOPPED             (1 << 0)
182 #define PL330_STATE_EXECUTING           (1 << 1)
183 #define PL330_STATE_WFE                 (1 << 2)
184 #define PL330_STATE_FAULTING            (1 << 3)
185 #define PL330_STATE_COMPLETING          (1 << 4)
186 #define PL330_STATE_WFP                 (1 << 5)
187 #define PL330_STATE_KILLING             (1 << 6)
188 #define PL330_STATE_FAULT_COMPLETING    (1 << 7)
189 #define PL330_STATE_CACHEMISS           (1 << 8)
190 #define PL330_STATE_UPDTPC              (1 << 9)
191 #define PL330_STATE_ATBARRIER           (1 << 10)
192 #define PL330_STATE_QUEUEBUSY           (1 << 11)
193 #define PL330_STATE_INVALID             (1 << 15)
194
195 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
196                                 | PL330_STATE_WFE | PL330_STATE_FAULTING)
197
198 #define CMD_DMAADDH             0x54
199 #define CMD_DMAEND              0x00
200 #define CMD_DMAFLUSHP           0x35
201 #define CMD_DMAGO               0xa0
202 #define CMD_DMALD               0x04
203 #define CMD_DMALDP              0x25
204 #define CMD_DMALP               0x20
205 #define CMD_DMALPEND            0x28
206 #define CMD_DMAKILL             0x01
207 #define CMD_DMAMOV              0xbc
208 #define CMD_DMANOP              0x18
209 #define CMD_DMARMB              0x12
210 #define CMD_DMASEV              0x34
211 #define CMD_DMAST               0x08
212 #define CMD_DMASTP              0x29
213 #define CMD_DMASTZ              0x0c
214 #define CMD_DMAWFE              0x36
215 #define CMD_DMAWFP              0x30
216 #define CMD_DMAWMB              0x13
217
218 #define SZ_DMAADDH              3
219 #define SZ_DMAEND               1
220 #define SZ_DMAFLUSHP            2
221 #define SZ_DMALD                1
222 #define SZ_DMALDP               2
223 #define SZ_DMALP                2
224 #define SZ_DMALPEND             2
225 #define SZ_DMAKILL              1
226 #define SZ_DMAMOV               6
227 #define SZ_DMANOP               1
228 #define SZ_DMARMB               1
229 #define SZ_DMASEV               2
230 #define SZ_DMAST                1
231 #define SZ_DMASTP               2
232 #define SZ_DMASTZ               1
233 #define SZ_DMAWFE               2
234 #define SZ_DMAWFP               2
235 #define SZ_DMAWMB               1
236 #define SZ_DMAGO                6
237
238 #define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
239 #define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
240
241 #define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
242 #define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
243
244 /*
245  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
246  * at 1byte/burst for P<->M and M<->M respectively.
247  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
248  * should be enough for P<->M and M<->M respectively.
249  */
250 #define MCODE_BUFF_PER_REQ      256
251
252 /* Use this _only_ to wait on transient states */
253 #define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
254
255 #ifdef PL330_DEBUG_MCGEN
256 static unsigned cmd_line;
257 #define PL330_DBGCMD_DUMP(off, x...)    do { \
258                                                 printk("%x:", cmd_line); \
259                                                 printk(x); \
260                                                 cmd_line += off; \
261                                         } while (0)
262 #define PL330_DBGMC_START(addr)         (cmd_line = addr)
263 #else
264 #define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
265 #define PL330_DBGMC_START(addr)         do {} while (0)
266 #endif
267
268 /* The number of default descriptors */
269
270 #define NR_DEFAULT_DESC 16
271
272 /* Delay for runtime PM autosuspend, ms */
273 #define PL330_AUTOSUSPEND_DELAY 20
274
275 /* Populated by the PL330 core driver for DMA API driver's info */
276 struct pl330_config {
277         u32     periph_id;
278 #define DMAC_MODE_NS    (1 << 0)
279         unsigned int    mode;
280         unsigned int    data_bus_width:10; /* In number of bits */
281         unsigned int    data_buf_dep:11;
282         unsigned int    num_chan:4;
283         unsigned int    num_peri:6;
284         u32             peri_ns;
285         unsigned int    num_events:6;
286         u32             irq_ns;
287 };
288
289 /**
290  * Request Configuration.
291  * The PL330 core does not modify this and uses the last
292  * working configuration if the request doesn't provide any.
293  *
294  * The Client may want to provide this info only for the
295  * first request and a request with new settings.
296  */
297 struct pl330_reqcfg {
298         /* Address Incrementing */
299         unsigned dst_inc:1;
300         unsigned src_inc:1;
301
302         /*
303          * For now, the SRC & DST protection levels
304          * and burst size/length are assumed same.
305          */
306         bool nonsecure;
307         bool privileged;
308         bool insnaccess;
309         unsigned brst_len:5;
310         unsigned brst_size:3; /* in power of 2 */
311
312         enum pl330_cachectrl dcctl;
313         enum pl330_cachectrl scctl;
314         enum pl330_byteswap swap;
315         struct pl330_config *pcfg;
316 };
317
318 /*
319  * One cycle of DMAC operation.
320  * There may be more than one xfer in a request.
321  */
322 struct pl330_xfer {
323         u32 src_addr;
324         u32 dst_addr;
325         /* Size to xfer */
326         u32 bytes;
327 };
328
329 /* The xfer callbacks are made with one of these arguments. */
330 enum pl330_op_err {
331         /* The all xfers in the request were success. */
332         PL330_ERR_NONE,
333         /* If req aborted due to global error. */
334         PL330_ERR_ABORT,
335         /* If req failed due to problem with Channel. */
336         PL330_ERR_FAIL,
337 };
338
339 enum dmamov_dst {
340         SAR = 0,
341         CCR,
342         DAR,
343 };
344
345 enum pl330_dst {
346         SRC = 0,
347         DST,
348 };
349
350 enum pl330_cond {
351         SINGLE,
352         BURST,
353         ALWAYS,
354 };
355
356 struct dma_pl330_desc;
357
358 struct _pl330_req {
359         u32 mc_bus;
360         void *mc_cpu;
361         struct dma_pl330_desc *desc;
362 };
363
364 /* ToBeDone for tasklet */
365 struct _pl330_tbd {
366         bool reset_dmac;
367         bool reset_mngr;
368         u8 reset_chan;
369 };
370
371 /* A DMAC Thread */
372 struct pl330_thread {
373         u8 id;
374         int ev;
375         /* If the channel is not yet acquired by any client */
376         bool free;
377         /* Parent DMAC */
378         struct pl330_dmac *dmac;
379         /* Only two at a time */
380         struct _pl330_req req[2];
381         /* Index of the last enqueued request */
382         unsigned lstenq;
383         /* Index of the last submitted request or -1 if the DMA is stopped */
384         int req_running;
385 };
386
387 enum pl330_dmac_state {
388         UNINIT,
389         INIT,
390         DYING,
391 };
392
393 enum desc_status {
394         /* In the DMAC pool */
395         FREE,
396         /*
397          * Allocated to some channel during prep_xxx
398          * Also may be sitting on the work_list.
399          */
400         PREP,
401         /*
402          * Sitting on the work_list and already submitted
403          * to the PL330 core. Not more than two descriptors
404          * of a channel can be BUSY at any time.
405          */
406         BUSY,
407         /*
408          * Sitting on the channel work_list but xfer done
409          * by PL330 core
410          */
411         DONE,
412 };
413
414 struct dma_pl330_chan {
415         /* Schedule desc completion */
416         struct tasklet_struct task;
417
418         /* DMA-Engine Channel */
419         struct dma_chan chan;
420
421         /* List of submitted descriptors */
422         struct list_head submitted_list;
423         /* List of issued descriptors */
424         struct list_head work_list;
425         /* List of completed descriptors */
426         struct list_head completed_list;
427
428         /* Pointer to the DMAC that manages this channel,
429          * NULL if the channel is available to be acquired.
430          * As the parent, this DMAC also provides descriptors
431          * to the channel.
432          */
433         struct pl330_dmac *dmac;
434
435         /* To protect channel manipulation */
436         spinlock_t lock;
437
438         /*
439          * Hardware channel thread of PL330 DMAC. NULL if the channel is
440          * available.
441          */
442         struct pl330_thread *thread;
443
444         /* For D-to-M and M-to-D channels */
445         int burst_sz; /* the peripheral fifo width */
446         int burst_len; /* the number of burst */
447         dma_addr_t fifo_addr;
448
449         /* for cyclic capability */
450         bool cyclic;
451 };
452
453 struct pl330_dmac {
454         /* DMA-Engine Device */
455         struct dma_device ddma;
456
457         /* Holds info about sg limitations */
458         struct device_dma_parameters dma_parms;
459
460         /* Pool of descriptors available for the DMAC's channels */
461         struct list_head desc_pool;
462         /* To protect desc_pool manipulation */
463         spinlock_t pool_lock;
464
465         /* Size of MicroCode buffers for each channel. */
466         unsigned mcbufsz;
467         /* ioremap'ed address of PL330 registers. */
468         void __iomem    *base;
469         /* Populated by the PL330 core driver during pl330_add */
470         struct pl330_config     pcfg;
471
472         spinlock_t              lock;
473         /* Maximum possible events/irqs */
474         int                     events[32];
475         /* BUS address of MicroCode buffer */
476         dma_addr_t              mcode_bus;
477         /* CPU address of MicroCode buffer */
478         void                    *mcode_cpu;
479         /* List of all Channel threads */
480         struct pl330_thread     *channels;
481         /* Pointer to the MANAGER thread */
482         struct pl330_thread     *manager;
483         /* To handle bad news in interrupt */
484         struct tasklet_struct   tasks;
485         struct _pl330_tbd       dmac_tbd;
486         /* State of DMAC operation */
487         enum pl330_dmac_state   state;
488         /* Holds list of reqs with due callbacks */
489         struct list_head        req_done;
490
491         /* Peripheral channels connected to this DMAC */
492         unsigned int num_peripherals;
493         struct dma_pl330_chan *peripherals; /* keep at end */
494         int quirks;
495 };
496
497 static struct pl330_of_quirks {
498         char *quirk;
499         int id;
500 } of_quirks[] = {
501         {
502                 .quirk = "arm,pl330-broken-no-flushp",
503                 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
504         }
505 };
506
507 struct dma_pl330_desc {
508         /* To attach to a queue as child */
509         struct list_head node;
510
511         /* Descriptor for the DMA Engine API */
512         struct dma_async_tx_descriptor txd;
513
514         /* Xfer for PL330 core */
515         struct pl330_xfer px;
516
517         struct pl330_reqcfg rqcfg;
518
519         enum desc_status status;
520
521         int bytes_requested;
522         bool last;
523
524         /* The channel which currently holds this desc */
525         struct dma_pl330_chan *pchan;
526
527         enum dma_transfer_direction rqtype;
528         /* Index of peripheral for the xfer. */
529         unsigned peri:5;
530         /* Hook to attach to DMAC's list of reqs with due callback */
531         struct list_head rqd;
532 };
533
534 struct _xfer_spec {
535         u32 ccr;
536         struct dma_pl330_desc *desc;
537 };
538
539 static inline bool _queue_empty(struct pl330_thread *thrd)
540 {
541         return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
542 }
543
544 static inline bool _queue_full(struct pl330_thread *thrd)
545 {
546         return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
547 }
548
549 static inline bool is_manager(struct pl330_thread *thrd)
550 {
551         return thrd->dmac->manager == thrd;
552 }
553
554 /* If manager of the thread is in Non-Secure mode */
555 static inline bool _manager_ns(struct pl330_thread *thrd)
556 {
557         return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
558 }
559
560 static inline u32 get_revision(u32 periph_id)
561 {
562         return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
563 }
564
565 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
566                 enum pl330_dst da, u16 val)
567 {
568         if (dry_run)
569                 return SZ_DMAADDH;
570
571         buf[0] = CMD_DMAADDH;
572         buf[0] |= (da << 1);
573         buf[1] = val;
574         buf[2] = val >> 8;
575
576         PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
577                 da == 1 ? "DA" : "SA", val);
578
579         return SZ_DMAADDH;
580 }
581
582 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
583 {
584         if (dry_run)
585                 return SZ_DMAEND;
586
587         buf[0] = CMD_DMAEND;
588
589         PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
590
591         return SZ_DMAEND;
592 }
593
594 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
595 {
596         if (dry_run)
597                 return SZ_DMAFLUSHP;
598
599         buf[0] = CMD_DMAFLUSHP;
600
601         peri &= 0x1f;
602         peri <<= 3;
603         buf[1] = peri;
604
605         PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
606
607         return SZ_DMAFLUSHP;
608 }
609
610 static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
611 {
612         if (dry_run)
613                 return SZ_DMALD;
614
615         buf[0] = CMD_DMALD;
616
617         if (cond == SINGLE)
618                 buf[0] |= (0 << 1) | (1 << 0);
619         else if (cond == BURST)
620                 buf[0] |= (1 << 1) | (1 << 0);
621
622         PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
623                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
624
625         return SZ_DMALD;
626 }
627
628 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
629                 enum pl330_cond cond, u8 peri)
630 {
631         if (dry_run)
632                 return SZ_DMALDP;
633
634         buf[0] = CMD_DMALDP;
635
636         if (cond == BURST)
637                 buf[0] |= (1 << 1);
638
639         peri &= 0x1f;
640         peri <<= 3;
641         buf[1] = peri;
642
643         PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
644                 cond == SINGLE ? 'S' : 'B', peri >> 3);
645
646         return SZ_DMALDP;
647 }
648
649 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
650                 unsigned loop, u8 cnt)
651 {
652         if (dry_run)
653                 return SZ_DMALP;
654
655         buf[0] = CMD_DMALP;
656
657         if (loop)
658                 buf[0] |= (1 << 1);
659
660         cnt--; /* DMAC increments by 1 internally */
661         buf[1] = cnt;
662
663         PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
664
665         return SZ_DMALP;
666 }
667
668 struct _arg_LPEND {
669         enum pl330_cond cond;
670         bool forever;
671         unsigned loop;
672         u8 bjump;
673 };
674
675 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
676                 const struct _arg_LPEND *arg)
677 {
678         enum pl330_cond cond = arg->cond;
679         bool forever = arg->forever;
680         unsigned loop = arg->loop;
681         u8 bjump = arg->bjump;
682
683         if (dry_run)
684                 return SZ_DMALPEND;
685
686         buf[0] = CMD_DMALPEND;
687
688         if (loop)
689                 buf[0] |= (1 << 2);
690
691         if (!forever)
692                 buf[0] |= (1 << 4);
693
694         if (cond == SINGLE)
695                 buf[0] |= (0 << 1) | (1 << 0);
696         else if (cond == BURST)
697                 buf[0] |= (1 << 1) | (1 << 0);
698
699         buf[1] = bjump;
700
701         PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
702                         forever ? "FE" : "END",
703                         cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
704                         loop ? '1' : '0',
705                         bjump);
706
707         return SZ_DMALPEND;
708 }
709
710 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
711 {
712         if (dry_run)
713                 return SZ_DMAKILL;
714
715         buf[0] = CMD_DMAKILL;
716
717         return SZ_DMAKILL;
718 }
719
720 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
721                 enum dmamov_dst dst, u32 val)
722 {
723         if (dry_run)
724                 return SZ_DMAMOV;
725
726         buf[0] = CMD_DMAMOV;
727         buf[1] = dst;
728         buf[2] = val;
729         buf[3] = val >> 8;
730         buf[4] = val >> 16;
731         buf[5] = val >> 24;
732
733         PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
734                 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
735
736         return SZ_DMAMOV;
737 }
738
739 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
740 {
741         if (dry_run)
742                 return SZ_DMANOP;
743
744         buf[0] = CMD_DMANOP;
745
746         PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
747
748         return SZ_DMANOP;
749 }
750
751 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
752 {
753         if (dry_run)
754                 return SZ_DMARMB;
755
756         buf[0] = CMD_DMARMB;
757
758         PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
759
760         return SZ_DMARMB;
761 }
762
763 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
764 {
765         if (dry_run)
766                 return SZ_DMASEV;
767
768         buf[0] = CMD_DMASEV;
769
770         ev &= 0x1f;
771         ev <<= 3;
772         buf[1] = ev;
773
774         PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
775
776         return SZ_DMASEV;
777 }
778
779 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
780 {
781         if (dry_run)
782                 return SZ_DMAST;
783
784         buf[0] = CMD_DMAST;
785
786         if (cond == SINGLE)
787                 buf[0] |= (0 << 1) | (1 << 0);
788         else if (cond == BURST)
789                 buf[0] |= (1 << 1) | (1 << 0);
790
791         PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
792                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
793
794         return SZ_DMAST;
795 }
796
797 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
798                 enum pl330_cond cond, u8 peri)
799 {
800         if (dry_run)
801                 return SZ_DMASTP;
802
803         buf[0] = CMD_DMASTP;
804
805         if (cond == BURST)
806                 buf[0] |= (1 << 1);
807
808         peri &= 0x1f;
809         peri <<= 3;
810         buf[1] = peri;
811
812         PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
813                 cond == SINGLE ? 'S' : 'B', peri >> 3);
814
815         return SZ_DMASTP;
816 }
817
818 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
819 {
820         if (dry_run)
821                 return SZ_DMASTZ;
822
823         buf[0] = CMD_DMASTZ;
824
825         PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
826
827         return SZ_DMASTZ;
828 }
829
830 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
831                 unsigned invalidate)
832 {
833         if (dry_run)
834                 return SZ_DMAWFE;
835
836         buf[0] = CMD_DMAWFE;
837
838         ev &= 0x1f;
839         ev <<= 3;
840         buf[1] = ev;
841
842         if (invalidate)
843                 buf[1] |= (1 << 1);
844
845         PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
846                 ev >> 3, invalidate ? ", I" : "");
847
848         return SZ_DMAWFE;
849 }
850
851 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
852                 enum pl330_cond cond, u8 peri)
853 {
854         if (dry_run)
855                 return SZ_DMAWFP;
856
857         buf[0] = CMD_DMAWFP;
858
859         if (cond == SINGLE)
860                 buf[0] |= (0 << 1) | (0 << 0);
861         else if (cond == BURST)
862                 buf[0] |= (1 << 1) | (0 << 0);
863         else
864                 buf[0] |= (0 << 1) | (1 << 0);
865
866         peri &= 0x1f;
867         peri <<= 3;
868         buf[1] = peri;
869
870         PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
871                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
872
873         return SZ_DMAWFP;
874 }
875
876 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
877 {
878         if (dry_run)
879                 return SZ_DMAWMB;
880
881         buf[0] = CMD_DMAWMB;
882
883         PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
884
885         return SZ_DMAWMB;
886 }
887
888 struct _arg_GO {
889         u8 chan;
890         u32 addr;
891         unsigned ns;
892 };
893
894 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
895                 const struct _arg_GO *arg)
896 {
897         u8 chan = arg->chan;
898         u32 addr = arg->addr;
899         unsigned ns = arg->ns;
900
901         if (dry_run)
902                 return SZ_DMAGO;
903
904         buf[0] = CMD_DMAGO;
905         buf[0] |= (ns << 1);
906         buf[1] = chan & 0x7;
907         buf[2] = addr;
908         buf[3] = addr >> 8;
909         buf[4] = addr >> 16;
910         buf[5] = addr >> 24;
911
912         return SZ_DMAGO;
913 }
914
915 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
916
917 /* Returns Time-Out */
918 static bool _until_dmac_idle(struct pl330_thread *thrd)
919 {
920         void __iomem *regs = thrd->dmac->base;
921         unsigned long loops = msecs_to_loops(5);
922
923         do {
924                 /* Until Manager is Idle */
925                 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
926                         break;
927
928                 cpu_relax();
929         } while (--loops);
930
931         if (!loops)
932                 return true;
933
934         return false;
935 }
936
937 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
938                 u8 insn[], bool as_manager)
939 {
940         void __iomem *regs = thrd->dmac->base;
941         u32 val;
942
943         val = (insn[0] << 16) | (insn[1] << 24);
944         if (!as_manager) {
945                 val |= (1 << 0);
946                 val |= (thrd->id << 8); /* Channel Number */
947         }
948         writel(val, regs + DBGINST0);
949
950         val = le32_to_cpu(*((__le32 *)&insn[2]));
951         writel(val, regs + DBGINST1);
952
953         /* If timed out due to halted state-machine */
954         if (_until_dmac_idle(thrd)) {
955                 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
956                 return;
957         }
958
959         /* Get going */
960         writel(0, regs + DBGCMD);
961 }
962
963 static inline u32 _state(struct pl330_thread *thrd)
964 {
965         void __iomem *regs = thrd->dmac->base;
966         u32 val;
967
968         if (is_manager(thrd))
969                 val = readl(regs + DS) & 0xf;
970         else
971                 val = readl(regs + CS(thrd->id)) & 0xf;
972
973         switch (val) {
974         case DS_ST_STOP:
975                 return PL330_STATE_STOPPED;
976         case DS_ST_EXEC:
977                 return PL330_STATE_EXECUTING;
978         case DS_ST_CMISS:
979                 return PL330_STATE_CACHEMISS;
980         case DS_ST_UPDTPC:
981                 return PL330_STATE_UPDTPC;
982         case DS_ST_WFE:
983                 return PL330_STATE_WFE;
984         case DS_ST_FAULT:
985                 return PL330_STATE_FAULTING;
986         case DS_ST_ATBRR:
987                 if (is_manager(thrd))
988                         return PL330_STATE_INVALID;
989                 else
990                         return PL330_STATE_ATBARRIER;
991         case DS_ST_QBUSY:
992                 if (is_manager(thrd))
993                         return PL330_STATE_INVALID;
994                 else
995                         return PL330_STATE_QUEUEBUSY;
996         case DS_ST_WFP:
997                 if (is_manager(thrd))
998                         return PL330_STATE_INVALID;
999                 else
1000                         return PL330_STATE_WFP;
1001         case DS_ST_KILL:
1002                 if (is_manager(thrd))
1003                         return PL330_STATE_INVALID;
1004                 else
1005                         return PL330_STATE_KILLING;
1006         case DS_ST_CMPLT:
1007                 if (is_manager(thrd))
1008                         return PL330_STATE_INVALID;
1009                 else
1010                         return PL330_STATE_COMPLETING;
1011         case DS_ST_FLTCMP:
1012                 if (is_manager(thrd))
1013                         return PL330_STATE_INVALID;
1014                 else
1015                         return PL330_STATE_FAULT_COMPLETING;
1016         default:
1017                 return PL330_STATE_INVALID;
1018         }
1019 }
1020
1021 static void _stop(struct pl330_thread *thrd)
1022 {
1023         void __iomem *regs = thrd->dmac->base;
1024         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1025
1026         if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1027                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1028
1029         /* Return if nothing needs to be done */
1030         if (_state(thrd) == PL330_STATE_COMPLETING
1031                   || _state(thrd) == PL330_STATE_KILLING
1032                   || _state(thrd) == PL330_STATE_STOPPED)
1033                 return;
1034
1035         _emit_KILL(0, insn);
1036
1037         /* Stop generating interrupts for SEV */
1038         writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1039
1040         _execute_DBGINSN(thrd, insn, is_manager(thrd));
1041 }
1042
1043 /* Start doing req 'idx' of thread 'thrd' */
1044 static bool _trigger(struct pl330_thread *thrd)
1045 {
1046         void __iomem *regs = thrd->dmac->base;
1047         struct _pl330_req *req;
1048         struct dma_pl330_desc *desc;
1049         struct _arg_GO go;
1050         unsigned ns;
1051         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1052         int idx;
1053
1054         /* Return if already ACTIVE */
1055         if (_state(thrd) != PL330_STATE_STOPPED)
1056                 return true;
1057
1058         idx = 1 - thrd->lstenq;
1059         if (thrd->req[idx].desc != NULL) {
1060                 req = &thrd->req[idx];
1061         } else {
1062                 idx = thrd->lstenq;
1063                 if (thrd->req[idx].desc != NULL)
1064                         req = &thrd->req[idx];
1065                 else
1066                         req = NULL;
1067         }
1068
1069         /* Return if no request */
1070         if (!req)
1071                 return true;
1072
1073         /* Return if req is running */
1074         if (idx == thrd->req_running)
1075                 return true;
1076
1077         desc = req->desc;
1078
1079         ns = desc->rqcfg.nonsecure ? 1 : 0;
1080
1081         /* See 'Abort Sources' point-4 at Page 2-25 */
1082         if (_manager_ns(thrd) && !ns)
1083                 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1084                         __func__, __LINE__);
1085
1086         go.chan = thrd->id;
1087         go.addr = req->mc_bus;
1088         go.ns = ns;
1089         _emit_GO(0, insn, &go);
1090
1091         /* Set to generate interrupts for SEV */
1092         writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1093
1094         /* Only manager can execute GO */
1095         _execute_DBGINSN(thrd, insn, true);
1096
1097         thrd->req_running = idx;
1098
1099         return true;
1100 }
1101
1102 static bool _start(struct pl330_thread *thrd)
1103 {
1104         switch (_state(thrd)) {
1105         case PL330_STATE_FAULT_COMPLETING:
1106                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1107
1108                 if (_state(thrd) == PL330_STATE_KILLING)
1109                         UNTIL(thrd, PL330_STATE_STOPPED)
1110
1111         case PL330_STATE_FAULTING:
1112                 _stop(thrd);
1113
1114         case PL330_STATE_KILLING:
1115         case PL330_STATE_COMPLETING:
1116                 UNTIL(thrd, PL330_STATE_STOPPED)
1117
1118         case PL330_STATE_STOPPED:
1119                 return _trigger(thrd);
1120
1121         case PL330_STATE_WFP:
1122         case PL330_STATE_QUEUEBUSY:
1123         case PL330_STATE_ATBARRIER:
1124         case PL330_STATE_UPDTPC:
1125         case PL330_STATE_CACHEMISS:
1126         case PL330_STATE_EXECUTING:
1127                 return true;
1128
1129         case PL330_STATE_WFE: /* For RESUME, nothing yet */
1130         default:
1131                 return false;
1132         }
1133 }
1134
1135 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1136                 const struct _xfer_spec *pxs, int cyc)
1137 {
1138         int off = 0;
1139         struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1140
1141         /* check lock-up free version */
1142         if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1143                 while (cyc--) {
1144                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1145                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1146                 }
1147         } else {
1148                 while (cyc--) {
1149                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1150                         off += _emit_RMB(dry_run, &buf[off]);
1151                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1152                         off += _emit_WMB(dry_run, &buf[off]);
1153                 }
1154         }
1155
1156         return off;
1157 }
1158
1159 static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1160                                  u8 buf[], const struct _xfer_spec *pxs,
1161                                  int cyc)
1162 {
1163         int off = 0;
1164         enum pl330_cond cond;
1165
1166         if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1167                 cond = BURST;
1168         else
1169                 cond = SINGLE;
1170
1171         while (cyc--) {
1172                 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1173                 off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1174                 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1175
1176                 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1177                         off += _emit_FLUSHP(dry_run, &buf[off],
1178                                             pxs->desc->peri);
1179         }
1180
1181         return off;
1182 }
1183
1184 static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1185                                  unsigned dry_run, u8 buf[],
1186                                  const struct _xfer_spec *pxs, int cyc)
1187 {
1188         int off = 0;
1189         enum pl330_cond cond;
1190
1191         if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1192                 cond = BURST;
1193         else
1194                 cond = SINGLE;
1195
1196         while (cyc--) {
1197                 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1198                 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1199                 off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1200
1201                 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1202                         off += _emit_FLUSHP(dry_run, &buf[off],
1203                                             pxs->desc->peri);
1204         }
1205
1206         return off;
1207 }
1208
1209 static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1210                 const struct _xfer_spec *pxs, int cyc)
1211 {
1212         int off = 0;
1213
1214         switch (pxs->desc->rqtype) {
1215         case DMA_MEM_TO_DEV:
1216                 off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1217                 break;
1218         case DMA_DEV_TO_MEM:
1219                 off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1220                 break;
1221         case DMA_MEM_TO_MEM:
1222                 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1223                 break;
1224         default:
1225                 off += 0x40000000; /* Scare off the Client */
1226                 break;
1227         }
1228
1229         return off;
1230 }
1231
1232 /* Returns bytes consumed and updates bursts */
1233 static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1234                 unsigned long *bursts, const struct _xfer_spec *pxs)
1235 {
1236         int cyc, cycmax, szlp, szlpend, szbrst, off;
1237         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1238         struct _arg_LPEND lpend;
1239
1240         if (*bursts == 1)
1241                 return _bursts(pl330, dry_run, buf, pxs, 1);
1242
1243         /* Max iterations possible in DMALP is 256 */
1244         if (*bursts >= 256*256) {
1245                 lcnt1 = 256;
1246                 lcnt0 = 256;
1247                 cyc = *bursts / lcnt1 / lcnt0;
1248         } else if (*bursts > 256) {
1249                 lcnt1 = 256;
1250                 lcnt0 = *bursts / lcnt1;
1251                 cyc = 1;
1252         } else {
1253                 lcnt1 = *bursts;
1254                 lcnt0 = 0;
1255                 cyc = 1;
1256         }
1257
1258         szlp = _emit_LP(1, buf, 0, 0);
1259         szbrst = _bursts(pl330, 1, buf, pxs, 1);
1260
1261         lpend.cond = ALWAYS;
1262         lpend.forever = false;
1263         lpend.loop = 0;
1264         lpend.bjump = 0;
1265         szlpend = _emit_LPEND(1, buf, &lpend);
1266
1267         if (lcnt0) {
1268                 szlp *= 2;
1269                 szlpend *= 2;
1270         }
1271
1272         /*
1273          * Max bursts that we can unroll due to limit on the
1274          * size of backward jump that can be encoded in DMALPEND
1275          * which is 8-bits and hence 255
1276          */
1277         cycmax = (255 - (szlp + szlpend)) / szbrst;
1278
1279         cyc = (cycmax < cyc) ? cycmax : cyc;
1280
1281         off = 0;
1282
1283         if (lcnt0) {
1284                 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1285                 ljmp0 = off;
1286         }
1287
1288         off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1289         ljmp1 = off;
1290
1291         off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1292
1293         lpend.cond = ALWAYS;
1294         lpend.forever = false;
1295         lpend.loop = 1;
1296         lpend.bjump = off - ljmp1;
1297         off += _emit_LPEND(dry_run, &buf[off], &lpend);
1298
1299         if (lcnt0) {
1300                 lpend.cond = ALWAYS;
1301                 lpend.forever = false;
1302                 lpend.loop = 0;
1303                 lpend.bjump = off - ljmp0;
1304                 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1305         }
1306
1307         *bursts = lcnt1 * cyc;
1308         if (lcnt0)
1309                 *bursts *= lcnt0;
1310
1311         return off;
1312 }
1313
1314 static inline int _setup_loops(struct pl330_dmac *pl330,
1315                                unsigned dry_run, u8 buf[],
1316                                const struct _xfer_spec *pxs)
1317 {
1318         struct pl330_xfer *x = &pxs->desc->px;
1319         u32 ccr = pxs->ccr;
1320         unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1321         int off = 0;
1322
1323         while (bursts) {
1324                 c = bursts;
1325                 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1326                 bursts -= c;
1327         }
1328
1329         return off;
1330 }
1331
1332 static inline int _setup_xfer(struct pl330_dmac *pl330,
1333                               unsigned dry_run, u8 buf[],
1334                               const struct _xfer_spec *pxs)
1335 {
1336         struct pl330_xfer *x = &pxs->desc->px;
1337         int off = 0;
1338
1339         /* DMAMOV SAR, x->src_addr */
1340         off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1341         /* DMAMOV DAR, x->dst_addr */
1342         off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1343
1344         /* Setup Loop(s) */
1345         off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1346
1347         return off;
1348 }
1349
1350 /*
1351  * A req is a sequence of one or more xfer units.
1352  * Returns the number of bytes taken to setup the MC for the req.
1353  */
1354 static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1355                       struct pl330_thread *thrd, unsigned index,
1356                       struct _xfer_spec *pxs)
1357 {
1358         struct _pl330_req *req = &thrd->req[index];
1359         struct pl330_xfer *x;
1360         u8 *buf = req->mc_cpu;
1361         int off = 0;
1362
1363         PL330_DBGMC_START(req->mc_bus);
1364
1365         /* DMAMOV CCR, ccr */
1366         off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1367
1368         x = &pxs->desc->px;
1369         /* Error if xfer length is not aligned at burst size */
1370         if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1371                 return -EINVAL;
1372
1373         off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1374
1375         /* DMASEV peripheral/event */
1376         off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1377         /* DMAEND */
1378         off += _emit_END(dry_run, &buf[off]);
1379
1380         return off;
1381 }
1382
1383 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1384 {
1385         u32 ccr = 0;
1386
1387         if (rqc->src_inc)
1388                 ccr |= CC_SRCINC;
1389
1390         if (rqc->dst_inc)
1391                 ccr |= CC_DSTINC;
1392
1393         /* We set same protection levels for Src and DST for now */
1394         if (rqc->privileged)
1395                 ccr |= CC_SRCPRI | CC_DSTPRI;
1396         if (rqc->nonsecure)
1397                 ccr |= CC_SRCNS | CC_DSTNS;
1398         if (rqc->insnaccess)
1399                 ccr |= CC_SRCIA | CC_DSTIA;
1400
1401         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1402         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1403
1404         ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1405         ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1406
1407         ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1408         ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1409
1410         ccr |= (rqc->swap << CC_SWAP_SHFT);
1411
1412         return ccr;
1413 }
1414
1415 /*
1416  * Submit a list of xfers after which the client wants notification.
1417  * Client is not notified after each xfer unit, just once after all
1418  * xfer units are done or some error occurs.
1419  */
1420 static int pl330_submit_req(struct pl330_thread *thrd,
1421         struct dma_pl330_desc *desc)
1422 {
1423         struct pl330_dmac *pl330 = thrd->dmac;
1424         struct _xfer_spec xs;
1425         unsigned long flags;
1426         unsigned idx;
1427         u32 ccr;
1428         int ret = 0;
1429
1430         if (pl330->state == DYING
1431                 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1432                 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1433                         __func__, __LINE__);
1434                 return -EAGAIN;
1435         }
1436
1437         /* If request for non-existing peripheral */
1438         if (desc->rqtype != DMA_MEM_TO_MEM &&
1439             desc->peri >= pl330->pcfg.num_peri) {
1440                 dev_info(thrd->dmac->ddma.dev,
1441                                 "%s:%d Invalid peripheral(%u)!\n",
1442                                 __func__, __LINE__, desc->peri);
1443                 return -EINVAL;
1444         }
1445
1446         spin_lock_irqsave(&pl330->lock, flags);
1447
1448         if (_queue_full(thrd)) {
1449                 ret = -EAGAIN;
1450                 goto xfer_exit;
1451         }
1452
1453         /* Prefer Secure Channel */
1454         if (!_manager_ns(thrd))
1455                 desc->rqcfg.nonsecure = 0;
1456         else
1457                 desc->rqcfg.nonsecure = 1;
1458
1459         ccr = _prepare_ccr(&desc->rqcfg);
1460
1461         idx = thrd->req[0].desc == NULL ? 0 : 1;
1462
1463         xs.ccr = ccr;
1464         xs.desc = desc;
1465
1466         /* First dry run to check if req is acceptable */
1467         ret = _setup_req(pl330, 1, thrd, idx, &xs);
1468         if (ret < 0)
1469                 goto xfer_exit;
1470
1471         if (ret > pl330->mcbufsz / 2) {
1472                 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1473                                 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1474                 ret = -ENOMEM;
1475                 goto xfer_exit;
1476         }
1477
1478         /* Hook the request */
1479         thrd->lstenq = idx;
1480         thrd->req[idx].desc = desc;
1481         _setup_req(pl330, 0, thrd, idx, &xs);
1482
1483         ret = 0;
1484
1485 xfer_exit:
1486         spin_unlock_irqrestore(&pl330->lock, flags);
1487
1488         return ret;
1489 }
1490
1491 static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1492 {
1493         struct dma_pl330_chan *pch;
1494         unsigned long flags;
1495
1496         if (!desc)
1497                 return;
1498
1499         pch = desc->pchan;
1500
1501         /* If desc aborted */
1502         if (!pch)
1503                 return;
1504
1505         spin_lock_irqsave(&pch->lock, flags);
1506
1507         desc->status = DONE;
1508
1509         spin_unlock_irqrestore(&pch->lock, flags);
1510
1511         tasklet_schedule(&pch->task);
1512 }
1513
1514 static void pl330_dotask(unsigned long data)
1515 {
1516         struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1517         unsigned long flags;
1518         int i;
1519
1520         spin_lock_irqsave(&pl330->lock, flags);
1521
1522         /* The DMAC itself gone nuts */
1523         if (pl330->dmac_tbd.reset_dmac) {
1524                 pl330->state = DYING;
1525                 /* Reset the manager too */
1526                 pl330->dmac_tbd.reset_mngr = true;
1527                 /* Clear the reset flag */
1528                 pl330->dmac_tbd.reset_dmac = false;
1529         }
1530
1531         if (pl330->dmac_tbd.reset_mngr) {
1532                 _stop(pl330->manager);
1533                 /* Reset all channels */
1534                 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1535                 /* Clear the reset flag */
1536                 pl330->dmac_tbd.reset_mngr = false;
1537         }
1538
1539         for (i = 0; i < pl330->pcfg.num_chan; i++) {
1540
1541                 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1542                         struct pl330_thread *thrd = &pl330->channels[i];
1543                         void __iomem *regs = pl330->base;
1544                         enum pl330_op_err err;
1545
1546                         _stop(thrd);
1547
1548                         if (readl(regs + FSC) & (1 << thrd->id))
1549                                 err = PL330_ERR_FAIL;
1550                         else
1551                                 err = PL330_ERR_ABORT;
1552
1553                         spin_unlock_irqrestore(&pl330->lock, flags);
1554                         dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1555                         dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1556                         spin_lock_irqsave(&pl330->lock, flags);
1557
1558                         thrd->req[0].desc = NULL;
1559                         thrd->req[1].desc = NULL;
1560                         thrd->req_running = -1;
1561
1562                         /* Clear the reset flag */
1563                         pl330->dmac_tbd.reset_chan &= ~(1 << i);
1564                 }
1565         }
1566
1567         spin_unlock_irqrestore(&pl330->lock, flags);
1568
1569         return;
1570 }
1571
1572 /* Returns 1 if state was updated, 0 otherwise */
1573 static int pl330_update(struct pl330_dmac *pl330)
1574 {
1575         struct dma_pl330_desc *descdone, *tmp;
1576         unsigned long flags;
1577         void __iomem *regs;
1578         u32 val;
1579         int id, ev, ret = 0;
1580
1581         regs = pl330->base;
1582
1583         spin_lock_irqsave(&pl330->lock, flags);
1584
1585         val = readl(regs + FSM) & 0x1;
1586         if (val)
1587                 pl330->dmac_tbd.reset_mngr = true;
1588         else
1589                 pl330->dmac_tbd.reset_mngr = false;
1590
1591         val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1592         pl330->dmac_tbd.reset_chan |= val;
1593         if (val) {
1594                 int i = 0;
1595                 while (i < pl330->pcfg.num_chan) {
1596                         if (val & (1 << i)) {
1597                                 dev_info(pl330->ddma.dev,
1598                                         "Reset Channel-%d\t CS-%x FTC-%x\n",
1599                                                 i, readl(regs + CS(i)),
1600                                                 readl(regs + FTC(i)));
1601                                 _stop(&pl330->channels[i]);
1602                         }
1603                         i++;
1604                 }
1605         }
1606
1607         /* Check which event happened i.e, thread notified */
1608         val = readl(regs + ES);
1609         if (pl330->pcfg.num_events < 32
1610                         && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1611                 pl330->dmac_tbd.reset_dmac = true;
1612                 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1613                         __LINE__);
1614                 ret = 1;
1615                 goto updt_exit;
1616         }
1617
1618         for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1619                 if (val & (1 << ev)) { /* Event occurred */
1620                         struct pl330_thread *thrd;
1621                         u32 inten = readl(regs + INTEN);
1622                         int active;
1623
1624                         /* Clear the event */
1625                         if (inten & (1 << ev))
1626                                 writel(1 << ev, regs + INTCLR);
1627
1628                         ret = 1;
1629
1630                         id = pl330->events[ev];
1631
1632                         thrd = &pl330->channels[id];
1633
1634                         active = thrd->req_running;
1635                         if (active == -1) /* Aborted */
1636                                 continue;
1637
1638                         /* Detach the req */
1639                         descdone = thrd->req[active].desc;
1640                         thrd->req[active].desc = NULL;
1641
1642                         thrd->req_running = -1;
1643
1644                         /* Get going again ASAP */
1645                         _start(thrd);
1646
1647                         /* For now, just make a list of callbacks to be done */
1648                         list_add_tail(&descdone->rqd, &pl330->req_done);
1649                 }
1650         }
1651
1652         /* Now that we are in no hurry, do the callbacks */
1653         list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1654                 list_del(&descdone->rqd);
1655                 spin_unlock_irqrestore(&pl330->lock, flags);
1656                 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1657                 spin_lock_irqsave(&pl330->lock, flags);
1658         }
1659
1660 updt_exit:
1661         spin_unlock_irqrestore(&pl330->lock, flags);
1662
1663         if (pl330->dmac_tbd.reset_dmac
1664                         || pl330->dmac_tbd.reset_mngr
1665                         || pl330->dmac_tbd.reset_chan) {
1666                 ret = 1;
1667                 tasklet_schedule(&pl330->tasks);
1668         }
1669
1670         return ret;
1671 }
1672
1673 /* Reserve an event */
1674 static inline int _alloc_event(struct pl330_thread *thrd)
1675 {
1676         struct pl330_dmac *pl330 = thrd->dmac;
1677         int ev;
1678
1679         for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1680                 if (pl330->events[ev] == -1) {
1681                         pl330->events[ev] = thrd->id;
1682                         return ev;
1683                 }
1684
1685         return -1;
1686 }
1687
1688 static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1689 {
1690         return pl330->pcfg.irq_ns & (1 << i);
1691 }
1692
1693 /* Upon success, returns IdentityToken for the
1694  * allocated channel, NULL otherwise.
1695  */
1696 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1697 {
1698         struct pl330_thread *thrd = NULL;
1699         unsigned long flags;
1700         int chans, i;
1701
1702         if (pl330->state == DYING)
1703                 return NULL;
1704
1705         chans = pl330->pcfg.num_chan;
1706
1707         spin_lock_irqsave(&pl330->lock, flags);
1708
1709         for (i = 0; i < chans; i++) {
1710                 thrd = &pl330->channels[i];
1711                 if ((thrd->free) && (!_manager_ns(thrd) ||
1712                                         _chan_ns(pl330, i))) {
1713                         thrd->ev = _alloc_event(thrd);
1714                         if (thrd->ev >= 0) {
1715                                 thrd->free = false;
1716                                 thrd->lstenq = 1;
1717                                 thrd->req[0].desc = NULL;
1718                                 thrd->req[1].desc = NULL;
1719                                 thrd->req_running = -1;
1720                                 break;
1721                         }
1722                 }
1723                 thrd = NULL;
1724         }
1725
1726         spin_unlock_irqrestore(&pl330->lock, flags);
1727
1728         return thrd;
1729 }
1730
1731 /* Release an event */
1732 static inline void _free_event(struct pl330_thread *thrd, int ev)
1733 {
1734         struct pl330_dmac *pl330 = thrd->dmac;
1735
1736         /* If the event is valid and was held by the thread */
1737         if (ev >= 0 && ev < pl330->pcfg.num_events
1738                         && pl330->events[ev] == thrd->id)
1739                 pl330->events[ev] = -1;
1740 }
1741
1742 static void pl330_release_channel(struct pl330_thread *thrd)
1743 {
1744         struct pl330_dmac *pl330;
1745         unsigned long flags;
1746
1747         if (!thrd || thrd->free)
1748                 return;
1749
1750         _stop(thrd);
1751
1752         dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1753         dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1754
1755         pl330 = thrd->dmac;
1756
1757         spin_lock_irqsave(&pl330->lock, flags);
1758         _free_event(thrd, thrd->ev);
1759         thrd->free = true;
1760         spin_unlock_irqrestore(&pl330->lock, flags);
1761 }
1762
1763 /* Initialize the structure for PL330 configuration, that can be used
1764  * by the client driver the make best use of the DMAC
1765  */
1766 static void read_dmac_config(struct pl330_dmac *pl330)
1767 {
1768         void __iomem *regs = pl330->base;
1769         u32 val;
1770
1771         val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1772         val &= CRD_DATA_WIDTH_MASK;
1773         pl330->pcfg.data_bus_width = 8 * (1 << val);
1774
1775         val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1776         val &= CRD_DATA_BUFF_MASK;
1777         pl330->pcfg.data_buf_dep = val + 1;
1778
1779         val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1780         val &= CR0_NUM_CHANS_MASK;
1781         val += 1;
1782         pl330->pcfg.num_chan = val;
1783
1784         val = readl(regs + CR0);
1785         if (val & CR0_PERIPH_REQ_SET) {
1786                 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1787                 val += 1;
1788                 pl330->pcfg.num_peri = val;
1789                 pl330->pcfg.peri_ns = readl(regs + CR4);
1790         } else {
1791                 pl330->pcfg.num_peri = 0;
1792         }
1793
1794         val = readl(regs + CR0);
1795         if (val & CR0_BOOT_MAN_NS)
1796                 pl330->pcfg.mode |= DMAC_MODE_NS;
1797         else
1798                 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1799
1800         val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1801         val &= CR0_NUM_EVENTS_MASK;
1802         val += 1;
1803         pl330->pcfg.num_events = val;
1804
1805         pl330->pcfg.irq_ns = readl(regs + CR3);
1806 }
1807
1808 static inline void _reset_thread(struct pl330_thread *thrd)
1809 {
1810         struct pl330_dmac *pl330 = thrd->dmac;
1811
1812         thrd->req[0].mc_cpu = pl330->mcode_cpu
1813                                 + (thrd->id * pl330->mcbufsz);
1814         thrd->req[0].mc_bus = pl330->mcode_bus
1815                                 + (thrd->id * pl330->mcbufsz);
1816         thrd->req[0].desc = NULL;
1817
1818         thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1819                                 + pl330->mcbufsz / 2;
1820         thrd->req[1].mc_bus = thrd->req[0].mc_bus
1821                                 + pl330->mcbufsz / 2;
1822         thrd->req[1].desc = NULL;
1823
1824         thrd->req_running = -1;
1825 }
1826
1827 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1828 {
1829         int chans = pl330->pcfg.num_chan;
1830         struct pl330_thread *thrd;
1831         int i;
1832
1833         /* Allocate 1 Manager and 'chans' Channel threads */
1834         pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1835                                         GFP_KERNEL);
1836         if (!pl330->channels)
1837                 return -ENOMEM;
1838
1839         /* Init Channel threads */
1840         for (i = 0; i < chans; i++) {
1841                 thrd = &pl330->channels[i];
1842                 thrd->id = i;
1843                 thrd->dmac = pl330;
1844                 _reset_thread(thrd);
1845                 thrd->free = true;
1846         }
1847
1848         /* MANAGER is indexed at the end */
1849         thrd = &pl330->channels[chans];
1850         thrd->id = chans;
1851         thrd->dmac = pl330;
1852         thrd->free = false;
1853         pl330->manager = thrd;
1854
1855         return 0;
1856 }
1857
1858 static int dmac_alloc_resources(struct pl330_dmac *pl330)
1859 {
1860         int chans = pl330->pcfg.num_chan;
1861         int ret;
1862
1863         /*
1864          * Alloc MicroCode buffer for 'chans' Channel threads.
1865          * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1866          */
1867         pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
1868                                 chans * pl330->mcbufsz,
1869                                 &pl330->mcode_bus, GFP_KERNEL);
1870         if (!pl330->mcode_cpu) {
1871                 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1872                         __func__, __LINE__);
1873                 return -ENOMEM;
1874         }
1875
1876         ret = dmac_alloc_threads(pl330);
1877         if (ret) {
1878                 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1879                         __func__, __LINE__);
1880                 dma_free_coherent(pl330->ddma.dev,
1881                                 chans * pl330->mcbufsz,
1882                                 pl330->mcode_cpu, pl330->mcode_bus);
1883                 return ret;
1884         }
1885
1886         return 0;
1887 }
1888
1889 static int pl330_add(struct pl330_dmac *pl330)
1890 {
1891         int i, ret;
1892
1893         /* Check if we can handle this DMAC */
1894         if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1895                 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1896                         pl330->pcfg.periph_id);
1897                 return -EINVAL;
1898         }
1899
1900         /* Read the configuration of the DMAC */
1901         read_dmac_config(pl330);
1902
1903         if (pl330->pcfg.num_events == 0) {
1904                 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1905                         __func__, __LINE__);
1906                 return -EINVAL;
1907         }
1908
1909         spin_lock_init(&pl330->lock);
1910
1911         INIT_LIST_HEAD(&pl330->req_done);
1912
1913         /* Use default MC buffer size if not provided */
1914         if (!pl330->mcbufsz)
1915                 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1916
1917         /* Mark all events as free */
1918         for (i = 0; i < pl330->pcfg.num_events; i++)
1919                 pl330->events[i] = -1;
1920
1921         /* Allocate resources needed by the DMAC */
1922         ret = dmac_alloc_resources(pl330);
1923         if (ret) {
1924                 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1925                 return ret;
1926         }
1927
1928         tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1929
1930         pl330->state = INIT;
1931
1932         return 0;
1933 }
1934
1935 static int dmac_free_threads(struct pl330_dmac *pl330)
1936 {
1937         struct pl330_thread *thrd;
1938         int i;
1939
1940         /* Release Channel threads */
1941         for (i = 0; i < pl330->pcfg.num_chan; i++) {
1942                 thrd = &pl330->channels[i];
1943                 pl330_release_channel(thrd);
1944         }
1945
1946         /* Free memory */
1947         kfree(pl330->channels);
1948
1949         return 0;
1950 }
1951
1952 static void pl330_del(struct pl330_dmac *pl330)
1953 {
1954         pl330->state = UNINIT;
1955
1956         tasklet_kill(&pl330->tasks);
1957
1958         /* Free DMAC resources */
1959         dmac_free_threads(pl330);
1960
1961         dma_free_coherent(pl330->ddma.dev,
1962                 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1963                 pl330->mcode_bus);
1964 }
1965
1966 /* forward declaration */
1967 static struct amba_driver pl330_driver;
1968
1969 static inline struct dma_pl330_chan *
1970 to_pchan(struct dma_chan *ch)
1971 {
1972         if (!ch)
1973                 return NULL;
1974
1975         return container_of(ch, struct dma_pl330_chan, chan);
1976 }
1977
1978 static inline struct dma_pl330_desc *
1979 to_desc(struct dma_async_tx_descriptor *tx)
1980 {
1981         return container_of(tx, struct dma_pl330_desc, txd);
1982 }
1983
1984 static inline void fill_queue(struct dma_pl330_chan *pch)
1985 {
1986         struct dma_pl330_desc *desc;
1987         int ret;
1988
1989         list_for_each_entry(desc, &pch->work_list, node) {
1990
1991                 /* If already submitted */
1992                 if (desc->status == BUSY)
1993                         continue;
1994
1995                 ret = pl330_submit_req(pch->thread, desc);
1996                 if (!ret) {
1997                         desc->status = BUSY;
1998                 } else if (ret == -EAGAIN) {
1999                         /* QFull or DMAC Dying */
2000                         break;
2001                 } else {
2002                         /* Unacceptable request */
2003                         desc->status = DONE;
2004                         dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2005                                         __func__, __LINE__, desc->txd.cookie);
2006                         tasklet_schedule(&pch->task);
2007                 }
2008         }
2009 }
2010
2011 static void pl330_tasklet(unsigned long data)
2012 {
2013         struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2014         struct dma_pl330_desc *desc, *_dt;
2015         unsigned long flags;
2016         bool power_down = false;
2017
2018         spin_lock_irqsave(&pch->lock, flags);
2019
2020         /* Pick up ripe tomatoes */
2021         list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2022                 if (desc->status == DONE) {
2023                         if (!pch->cyclic)
2024                                 dma_cookie_complete(&desc->txd);
2025                         list_move_tail(&desc->node, &pch->completed_list);
2026                 }
2027
2028         /* Try to submit a req imm. next to the last completed cookie */
2029         fill_queue(pch);
2030
2031         if (list_empty(&pch->work_list)) {
2032                 spin_lock(&pch->thread->dmac->lock);
2033                 _stop(pch->thread);
2034                 spin_unlock(&pch->thread->dmac->lock);
2035                 power_down = true;
2036         } else {
2037                 /* Make sure the PL330 Channel thread is active */
2038                 spin_lock(&pch->thread->dmac->lock);
2039                 _start(pch->thread);
2040                 spin_unlock(&pch->thread->dmac->lock);
2041         }
2042
2043         while (!list_empty(&pch->completed_list)) {
2044                 struct dmaengine_desc_callback cb;
2045
2046                 desc = list_first_entry(&pch->completed_list,
2047                                         struct dma_pl330_desc, node);
2048
2049                 dmaengine_desc_get_callback(&desc->txd, &cb);
2050
2051                 if (pch->cyclic) {
2052                         desc->status = PREP;
2053                         list_move_tail(&desc->node, &pch->work_list);
2054                         if (power_down) {
2055                                 spin_lock(&pch->thread->dmac->lock);
2056                                 _start(pch->thread);
2057                                 spin_unlock(&pch->thread->dmac->lock);
2058                                 power_down = false;
2059                         }
2060                 } else {
2061                         desc->status = FREE;
2062                         list_move_tail(&desc->node, &pch->dmac->desc_pool);
2063                 }
2064
2065                 dma_descriptor_unmap(&desc->txd);
2066
2067                 if (dmaengine_desc_callback_valid(&cb)) {
2068                         spin_unlock_irqrestore(&pch->lock, flags);
2069                         dmaengine_desc_callback_invoke(&cb, NULL);
2070                         spin_lock_irqsave(&pch->lock, flags);
2071                 }
2072         }
2073         spin_unlock_irqrestore(&pch->lock, flags);
2074
2075         /* If work list empty, power down */
2076         if (power_down) {
2077                 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2078                 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2079         }
2080 }
2081
2082 bool pl330_filter(struct dma_chan *chan, void *param)
2083 {
2084         u8 *peri_id;
2085
2086         if (chan->device->dev->driver != &pl330_driver.drv)
2087                 return false;
2088
2089         peri_id = chan->private;
2090         return *peri_id == (unsigned long)param;
2091 }
2092 EXPORT_SYMBOL(pl330_filter);
2093
2094 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2095                                                 struct of_dma *ofdma)
2096 {
2097         int count = dma_spec->args_count;
2098         struct pl330_dmac *pl330 = ofdma->of_dma_data;
2099         unsigned int chan_id;
2100
2101         if (!pl330)
2102                 return NULL;
2103
2104         if (count != 1)
2105                 return NULL;
2106
2107         chan_id = dma_spec->args[0];
2108         if (chan_id >= pl330->num_peripherals)
2109                 return NULL;
2110
2111         return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2112 }
2113
2114 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2115 {
2116         struct dma_pl330_chan *pch = to_pchan(chan);
2117         struct pl330_dmac *pl330 = pch->dmac;
2118         unsigned long flags;
2119
2120         spin_lock_irqsave(&pch->lock, flags);
2121
2122         dma_cookie_init(chan);
2123         pch->cyclic = false;
2124
2125         pch->thread = pl330_request_channel(pl330);
2126         if (!pch->thread) {
2127                 spin_unlock_irqrestore(&pch->lock, flags);
2128                 return -ENOMEM;
2129         }
2130
2131         tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2132
2133         spin_unlock_irqrestore(&pch->lock, flags);
2134
2135         return 1;
2136 }
2137
2138 static int pl330_config(struct dma_chan *chan,
2139                         struct dma_slave_config *slave_config)
2140 {
2141         struct dma_pl330_chan *pch = to_pchan(chan);
2142
2143         if (slave_config->direction == DMA_MEM_TO_DEV) {
2144                 if (slave_config->dst_addr)
2145                         pch->fifo_addr = slave_config->dst_addr;
2146                 if (slave_config->dst_addr_width)
2147                         pch->burst_sz = __ffs(slave_config->dst_addr_width);
2148                 if (slave_config->dst_maxburst)
2149                         pch->burst_len = slave_config->dst_maxburst;
2150         } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2151                 if (slave_config->src_addr)
2152                         pch->fifo_addr = slave_config->src_addr;
2153                 if (slave_config->src_addr_width)
2154                         pch->burst_sz = __ffs(slave_config->src_addr_width);
2155                 if (slave_config->src_maxburst)
2156                         pch->burst_len = slave_config->src_maxburst;
2157         }
2158
2159         return 0;
2160 }
2161
2162 static int pl330_terminate_all(struct dma_chan *chan)
2163 {
2164         struct dma_pl330_chan *pch = to_pchan(chan);
2165         struct dma_pl330_desc *desc;
2166         unsigned long flags;
2167         struct pl330_dmac *pl330 = pch->dmac;
2168         LIST_HEAD(list);
2169
2170         pm_runtime_get_sync(pl330->ddma.dev);
2171         spin_lock_irqsave(&pch->lock, flags);
2172         spin_lock(&pl330->lock);
2173         _stop(pch->thread);
2174         spin_unlock(&pl330->lock);
2175
2176         pch->thread->req[0].desc = NULL;
2177         pch->thread->req[1].desc = NULL;
2178         pch->thread->req_running = -1;
2179
2180         /* Mark all desc done */
2181         list_for_each_entry(desc, &pch->submitted_list, node) {
2182                 desc->status = FREE;
2183                 dma_cookie_complete(&desc->txd);
2184         }
2185
2186         list_for_each_entry(desc, &pch->work_list , node) {
2187                 desc->status = FREE;
2188                 dma_cookie_complete(&desc->txd);
2189         }
2190
2191         list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2192         list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2193         list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2194         spin_unlock_irqrestore(&pch->lock, flags);
2195         pm_runtime_mark_last_busy(pl330->ddma.dev);
2196         pm_runtime_put_autosuspend(pl330->ddma.dev);
2197
2198         return 0;
2199 }
2200
2201 /*
2202  * We don't support DMA_RESUME command because of hardware
2203  * limitations, so after pausing the channel we cannot restore
2204  * it to active state. We have to terminate channel and setup
2205  * DMA transfer again. This pause feature was implemented to
2206  * allow safely read residue before channel termination.
2207  */
2208 static int pl330_pause(struct dma_chan *chan)
2209 {
2210         struct dma_pl330_chan *pch = to_pchan(chan);
2211         struct pl330_dmac *pl330 = pch->dmac;
2212         unsigned long flags;
2213
2214         pm_runtime_get_sync(pl330->ddma.dev);
2215         spin_lock_irqsave(&pch->lock, flags);
2216
2217         spin_lock(&pl330->lock);
2218         _stop(pch->thread);
2219         spin_unlock(&pl330->lock);
2220
2221         spin_unlock_irqrestore(&pch->lock, flags);
2222         pm_runtime_mark_last_busy(pl330->ddma.dev);
2223         pm_runtime_put_autosuspend(pl330->ddma.dev);
2224
2225         return 0;
2226 }
2227
2228 static void pl330_free_chan_resources(struct dma_chan *chan)
2229 {
2230         struct dma_pl330_chan *pch = to_pchan(chan);
2231         unsigned long flags;
2232
2233         tasklet_kill(&pch->task);
2234
2235         pm_runtime_get_sync(pch->dmac->ddma.dev);
2236         spin_lock_irqsave(&pch->lock, flags);
2237
2238         pl330_release_channel(pch->thread);
2239         pch->thread = NULL;
2240
2241         if (pch->cyclic)
2242                 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2243
2244         spin_unlock_irqrestore(&pch->lock, flags);
2245         pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2246         pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2247 }
2248
2249 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2250                                            struct dma_pl330_desc *desc)
2251 {
2252         struct pl330_thread *thrd = pch->thread;
2253         struct pl330_dmac *pl330 = pch->dmac;
2254         void __iomem *regs = thrd->dmac->base;
2255         u32 val, addr;
2256
2257         pm_runtime_get_sync(pl330->ddma.dev);
2258         val = addr = 0;
2259         if (desc->rqcfg.src_inc) {
2260                 val = readl(regs + SA(thrd->id));
2261                 addr = desc->px.src_addr;
2262         } else {
2263                 val = readl(regs + DA(thrd->id));
2264                 addr = desc->px.dst_addr;
2265         }
2266         pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2267         pm_runtime_put_autosuspend(pl330->ddma.dev);
2268
2269         /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2270         if (!val)
2271                 return 0;
2272
2273         return val - addr;
2274 }
2275
2276 static enum dma_status
2277 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2278                  struct dma_tx_state *txstate)
2279 {
2280         enum dma_status ret;
2281         unsigned long flags;
2282         struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2283         struct dma_pl330_chan *pch = to_pchan(chan);
2284         unsigned int transferred, residual = 0;
2285
2286         ret = dma_cookie_status(chan, cookie, txstate);
2287
2288         if (!txstate)
2289                 return ret;
2290
2291         if (ret == DMA_COMPLETE)
2292                 goto out;
2293
2294         spin_lock_irqsave(&pch->lock, flags);
2295         spin_lock(&pch->thread->dmac->lock);
2296
2297         if (pch->thread->req_running != -1)
2298                 running = pch->thread->req[pch->thread->req_running].desc;
2299
2300         last_enq = pch->thread->req[pch->thread->lstenq].desc;
2301
2302         /* Check in pending list */
2303         list_for_each_entry(desc, &pch->work_list, node) {
2304                 if (desc->status == DONE)
2305                         transferred = desc->bytes_requested;
2306                 else if (running && desc == running)
2307                         transferred =
2308                                 pl330_get_current_xferred_count(pch, desc);
2309                 else if (desc->status == BUSY)
2310                         /*
2311                          * Busy but not running means either just enqueued,
2312                          * or finished and not yet marked done
2313                          */
2314                         if (desc == last_enq)
2315                                 transferred = 0;
2316                         else
2317                                 transferred = desc->bytes_requested;
2318                 else
2319                         transferred = 0;
2320                 residual += desc->bytes_requested - transferred;
2321                 if (desc->txd.cookie == cookie) {
2322                         switch (desc->status) {
2323                         case DONE:
2324                                 ret = DMA_COMPLETE;
2325                                 break;
2326                         case PREP:
2327                         case BUSY:
2328                                 ret = DMA_IN_PROGRESS;
2329                                 break;
2330                         default:
2331                                 WARN_ON(1);
2332                         }
2333                         break;
2334                 }
2335                 if (desc->last)
2336                         residual = 0;
2337         }
2338         spin_unlock(&pch->thread->dmac->lock);
2339         spin_unlock_irqrestore(&pch->lock, flags);
2340
2341 out:
2342         dma_set_residue(txstate, residual);
2343
2344         return ret;
2345 }
2346
2347 static void pl330_issue_pending(struct dma_chan *chan)
2348 {
2349         struct dma_pl330_chan *pch = to_pchan(chan);
2350         unsigned long flags;
2351
2352         spin_lock_irqsave(&pch->lock, flags);
2353         if (list_empty(&pch->work_list)) {
2354                 /*
2355                  * Warn on nothing pending. Empty submitted_list may
2356                  * break our pm_runtime usage counter as it is
2357                  * updated on work_list emptiness status.
2358                  */
2359                 WARN_ON(list_empty(&pch->submitted_list));
2360                 pm_runtime_get_sync(pch->dmac->ddma.dev);
2361         }
2362         list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2363         spin_unlock_irqrestore(&pch->lock, flags);
2364
2365         pl330_tasklet((unsigned long)pch);
2366 }
2367
2368 /*
2369  * We returned the last one of the circular list of descriptor(s)
2370  * from prep_xxx, so the argument to submit corresponds to the last
2371  * descriptor of the list.
2372  */
2373 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2374 {
2375         struct dma_pl330_desc *desc, *last = to_desc(tx);
2376         struct dma_pl330_chan *pch = to_pchan(tx->chan);
2377         dma_cookie_t cookie;
2378         unsigned long flags;
2379
2380         spin_lock_irqsave(&pch->lock, flags);
2381
2382         /* Assign cookies to all nodes */
2383         while (!list_empty(&last->node)) {
2384                 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2385                 if (pch->cyclic) {
2386                         desc->txd.callback = last->txd.callback;
2387                         desc->txd.callback_param = last->txd.callback_param;
2388                 }
2389                 desc->last = false;
2390
2391                 dma_cookie_assign(&desc->txd);
2392
2393                 list_move_tail(&desc->node, &pch->submitted_list);
2394         }
2395
2396         last->last = true;
2397         cookie = dma_cookie_assign(&last->txd);
2398         list_add_tail(&last->node, &pch->submitted_list);
2399         spin_unlock_irqrestore(&pch->lock, flags);
2400
2401         return cookie;
2402 }
2403
2404 static inline void _init_desc(struct dma_pl330_desc *desc)
2405 {
2406         desc->rqcfg.swap = SWAP_NO;
2407         desc->rqcfg.scctl = CCTRL0;
2408         desc->rqcfg.dcctl = CCTRL0;
2409         desc->txd.tx_submit = pl330_tx_submit;
2410
2411         INIT_LIST_HEAD(&desc->node);
2412 }
2413
2414 /* Returns the number of descriptors added to the DMAC pool */
2415 static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2416 {
2417         struct dma_pl330_desc *desc;
2418         unsigned long flags;
2419         int i;
2420
2421         desc = kcalloc(count, sizeof(*desc), flg);
2422         if (!desc)
2423                 return 0;
2424
2425         spin_lock_irqsave(&pl330->pool_lock, flags);
2426
2427         for (i = 0; i < count; i++) {
2428                 _init_desc(&desc[i]);
2429                 list_add_tail(&desc[i].node, &pl330->desc_pool);
2430         }
2431
2432         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2433
2434         return count;
2435 }
2436
2437 static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2438 {
2439         struct dma_pl330_desc *desc = NULL;
2440         unsigned long flags;
2441
2442         spin_lock_irqsave(&pl330->pool_lock, flags);
2443
2444         if (!list_empty(&pl330->desc_pool)) {
2445                 desc = list_entry(pl330->desc_pool.next,
2446                                 struct dma_pl330_desc, node);
2447
2448                 list_del_init(&desc->node);
2449
2450                 desc->status = PREP;
2451                 desc->txd.callback = NULL;
2452         }
2453
2454         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2455
2456         return desc;
2457 }
2458
2459 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2460 {
2461         struct pl330_dmac *pl330 = pch->dmac;
2462         u8 *peri_id = pch->chan.private;
2463         struct dma_pl330_desc *desc;
2464
2465         /* Pluck one desc from the pool of DMAC */
2466         desc = pluck_desc(pl330);
2467
2468         /* If the DMAC pool is empty, alloc new */
2469         if (!desc) {
2470                 if (!add_desc(pl330, GFP_ATOMIC, 1))
2471                         return NULL;
2472
2473                 /* Try again */
2474                 desc = pluck_desc(pl330);
2475                 if (!desc) {
2476                         dev_err(pch->dmac->ddma.dev,
2477                                 "%s:%d ALERT!\n", __func__, __LINE__);
2478                         return NULL;
2479                 }
2480         }
2481
2482         /* Initialize the descriptor */
2483         desc->pchan = pch;
2484         desc->txd.cookie = 0;
2485         async_tx_ack(&desc->txd);
2486
2487         desc->peri = peri_id ? pch->chan.chan_id : 0;
2488         desc->rqcfg.pcfg = &pch->dmac->pcfg;
2489
2490         dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2491
2492         return desc;
2493 }
2494
2495 static inline void fill_px(struct pl330_xfer *px,
2496                 dma_addr_t dst, dma_addr_t src, size_t len)
2497 {
2498         px->bytes = len;
2499         px->dst_addr = dst;
2500         px->src_addr = src;
2501 }
2502
2503 static struct dma_pl330_desc *
2504 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2505                 dma_addr_t src, size_t len)
2506 {
2507         struct dma_pl330_desc *desc = pl330_get_desc(pch);
2508
2509         if (!desc) {
2510                 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2511                         __func__, __LINE__);
2512                 return NULL;
2513         }
2514
2515         /*
2516          * Ideally we should lookout for reqs bigger than
2517          * those that can be programmed with 256 bytes of
2518          * MC buffer, but considering a req size is seldom
2519          * going to be word-unaligned and more than 200MB,
2520          * we take it easy.
2521          * Also, should the limit is reached we'd rather
2522          * have the platform increase MC buffer size than
2523          * complicating this API driver.
2524          */
2525         fill_px(&desc->px, dst, src, len);
2526
2527         return desc;
2528 }
2529
2530 /* Call after fixing burst size */
2531 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2532 {
2533         struct dma_pl330_chan *pch = desc->pchan;
2534         struct pl330_dmac *pl330 = pch->dmac;
2535         int burst_len;
2536
2537         burst_len = pl330->pcfg.data_bus_width / 8;
2538         burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2539         burst_len >>= desc->rqcfg.brst_size;
2540
2541         /* src/dst_burst_len can't be more than 16 */
2542         if (burst_len > 16)
2543                 burst_len = 16;
2544
2545         while (burst_len > 1) {
2546                 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2547                         break;
2548                 burst_len--;
2549         }
2550
2551         return burst_len;
2552 }
2553
2554 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2555                 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2556                 size_t period_len, enum dma_transfer_direction direction,
2557                 unsigned long flags)
2558 {
2559         struct dma_pl330_desc *desc = NULL, *first = NULL;
2560         struct dma_pl330_chan *pch = to_pchan(chan);
2561         struct pl330_dmac *pl330 = pch->dmac;
2562         unsigned int i;
2563         dma_addr_t dst;
2564         dma_addr_t src;
2565
2566         if (len % period_len != 0)
2567                 return NULL;
2568
2569         if (!is_slave_direction(direction)) {
2570                 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2571                 __func__, __LINE__);
2572                 return NULL;
2573         }
2574
2575         for (i = 0; i < len / period_len; i++) {
2576                 desc = pl330_get_desc(pch);
2577                 if (!desc) {
2578                         dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2579                                 __func__, __LINE__);
2580
2581                         if (!first)
2582                                 return NULL;
2583
2584                         spin_lock_irqsave(&pl330->pool_lock, flags);
2585
2586                         while (!list_empty(&first->node)) {
2587                                 desc = list_entry(first->node.next,
2588                                                 struct dma_pl330_desc, node);
2589                                 list_move_tail(&desc->node, &pl330->desc_pool);
2590                         }
2591
2592                         list_move_tail(&first->node, &pl330->desc_pool);
2593
2594                         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2595
2596                         return NULL;
2597                 }
2598
2599                 switch (direction) {
2600                 case DMA_MEM_TO_DEV:
2601                         desc->rqcfg.src_inc = 1;
2602                         desc->rqcfg.dst_inc = 0;
2603                         src = dma_addr;
2604                         dst = pch->fifo_addr;
2605                         break;
2606                 case DMA_DEV_TO_MEM:
2607                         desc->rqcfg.src_inc = 0;
2608                         desc->rqcfg.dst_inc = 1;
2609                         src = pch->fifo_addr;
2610                         dst = dma_addr;
2611                         break;
2612                 default:
2613                         break;
2614                 }
2615
2616                 desc->rqtype = direction;
2617                 desc->rqcfg.brst_size = pch->burst_sz;
2618                 desc->rqcfg.brst_len = 1;
2619                 desc->bytes_requested = period_len;
2620                 fill_px(&desc->px, dst, src, period_len);
2621
2622                 if (!first)
2623                         first = desc;
2624                 else
2625                         list_add_tail(&desc->node, &first->node);
2626
2627                 dma_addr += period_len;
2628         }
2629
2630         if (!desc)
2631                 return NULL;
2632
2633         pch->cyclic = true;
2634         desc->txd.flags = flags;
2635
2636         return &desc->txd;
2637 }
2638
2639 static struct dma_async_tx_descriptor *
2640 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2641                 dma_addr_t src, size_t len, unsigned long flags)
2642 {
2643         struct dma_pl330_desc *desc;
2644         struct dma_pl330_chan *pch = to_pchan(chan);
2645         struct pl330_dmac *pl330;
2646         int burst;
2647
2648         if (unlikely(!pch || !len))
2649                 return NULL;
2650
2651         pl330 = pch->dmac;
2652
2653         desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2654         if (!desc)
2655                 return NULL;
2656
2657         desc->rqcfg.src_inc = 1;
2658         desc->rqcfg.dst_inc = 1;
2659         desc->rqtype = DMA_MEM_TO_MEM;
2660
2661         /* Select max possible burst size */
2662         burst = pl330->pcfg.data_bus_width / 8;
2663
2664         /*
2665          * Make sure we use a burst size that aligns with all the memcpy
2666          * parameters because our DMA programming algorithm doesn't cope with
2667          * transfers which straddle an entry in the DMA device's MFIFO.
2668          */
2669         while ((src | dst | len) & (burst - 1))
2670                 burst /= 2;
2671
2672         desc->rqcfg.brst_size = 0;
2673         while (burst != (1 << desc->rqcfg.brst_size))
2674                 desc->rqcfg.brst_size++;
2675
2676         /*
2677          * If burst size is smaller than bus width then make sure we only
2678          * transfer one at a time to avoid a burst stradling an MFIFO entry.
2679          */
2680         if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2681                 desc->rqcfg.brst_len = 1;
2682
2683         desc->rqcfg.brst_len = get_burst_len(desc, len);
2684         desc->bytes_requested = len;
2685
2686         desc->txd.flags = flags;
2687
2688         return &desc->txd;
2689 }
2690
2691 static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2692                                   struct dma_pl330_desc *first)
2693 {
2694         unsigned long flags;
2695         struct dma_pl330_desc *desc;
2696
2697         if (!first)
2698                 return;
2699
2700         spin_lock_irqsave(&pl330->pool_lock, flags);
2701
2702         while (!list_empty(&first->node)) {
2703                 desc = list_entry(first->node.next,
2704                                 struct dma_pl330_desc, node);
2705                 list_move_tail(&desc->node, &pl330->desc_pool);
2706         }
2707
2708         list_move_tail(&first->node, &pl330->desc_pool);
2709
2710         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2711 }
2712
2713 static struct dma_async_tx_descriptor *
2714 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2715                 unsigned int sg_len, enum dma_transfer_direction direction,
2716                 unsigned long flg, void *context)
2717 {
2718         struct dma_pl330_desc *first, *desc = NULL;
2719         struct dma_pl330_chan *pch = to_pchan(chan);
2720         struct scatterlist *sg;
2721         int i;
2722         dma_addr_t addr;
2723
2724         if (unlikely(!pch || !sgl || !sg_len))
2725                 return NULL;
2726
2727         addr = pch->fifo_addr;
2728
2729         first = NULL;
2730
2731         for_each_sg(sgl, sg, sg_len, i) {
2732
2733                 desc = pl330_get_desc(pch);
2734                 if (!desc) {
2735                         struct pl330_dmac *pl330 = pch->dmac;
2736
2737                         dev_err(pch->dmac->ddma.dev,
2738                                 "%s:%d Unable to fetch desc\n",
2739                                 __func__, __LINE__);
2740                         __pl330_giveback_desc(pl330, first);
2741
2742                         return NULL;
2743                 }
2744
2745                 if (!first)
2746                         first = desc;
2747                 else
2748                         list_add_tail(&desc->node, &first->node);
2749
2750                 if (direction == DMA_MEM_TO_DEV) {
2751                         desc->rqcfg.src_inc = 1;
2752                         desc->rqcfg.dst_inc = 0;
2753                         fill_px(&desc->px,
2754                                 addr, sg_dma_address(sg), sg_dma_len(sg));
2755                 } else {
2756                         desc->rqcfg.src_inc = 0;
2757                         desc->rqcfg.dst_inc = 1;
2758                         fill_px(&desc->px,
2759                                 sg_dma_address(sg), addr, sg_dma_len(sg));
2760                 }
2761
2762                 desc->rqcfg.brst_size = pch->burst_sz;
2763                 desc->rqcfg.brst_len = 1;
2764                 desc->rqtype = direction;
2765                 desc->bytes_requested = sg_dma_len(sg);
2766         }
2767
2768         /* Return the last desc in the chain */
2769         desc->txd.flags = flg;
2770         return &desc->txd;
2771 }
2772
2773 static irqreturn_t pl330_irq_handler(int irq, void *data)
2774 {
2775         if (pl330_update(data))
2776                 return IRQ_HANDLED;
2777         else
2778                 return IRQ_NONE;
2779 }
2780
2781 #define PL330_DMA_BUSWIDTHS \
2782         BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2783         BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2784         BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2785         BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2786         BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2787
2788 /*
2789  * Runtime PM callbacks are provided by amba/bus.c driver.
2790  *
2791  * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2792  * bus driver will only disable/enable the clock in runtime PM callbacks.
2793  */
2794 static int __maybe_unused pl330_suspend(struct device *dev)
2795 {
2796         struct amba_device *pcdev = to_amba_device(dev);
2797
2798         pm_runtime_disable(dev);
2799
2800         if (!pm_runtime_status_suspended(dev)) {
2801                 /* amba did not disable the clock */
2802                 amba_pclk_disable(pcdev);
2803         }
2804         amba_pclk_unprepare(pcdev);
2805
2806         return 0;
2807 }
2808
2809 static int __maybe_unused pl330_resume(struct device *dev)
2810 {
2811         struct amba_device *pcdev = to_amba_device(dev);
2812         int ret;
2813
2814         ret = amba_pclk_prepare(pcdev);
2815         if (ret)
2816                 return ret;
2817
2818         if (!pm_runtime_status_suspended(dev))
2819                 ret = amba_pclk_enable(pcdev);
2820
2821         pm_runtime_enable(dev);
2822
2823         return ret;
2824 }
2825
2826 static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2827
2828 static int
2829 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2830 {
2831         struct dma_pl330_platdata *pdat;
2832         struct pl330_config *pcfg;
2833         struct pl330_dmac *pl330;
2834         struct dma_pl330_chan *pch, *_p;
2835         struct dma_device *pd;
2836         struct resource *res;
2837         int i, ret, irq;
2838         int num_chan;
2839         struct device_node *np = adev->dev.of_node;
2840
2841         pdat = dev_get_platdata(&adev->dev);
2842
2843         ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2844         if (ret)
2845                 return ret;
2846
2847         /* Allocate a new DMAC and its Channels */
2848         pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2849         if (!pl330)
2850                 return -ENOMEM;
2851
2852         pd = &pl330->ddma;
2853         pd->dev = &adev->dev;
2854
2855         pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2856
2857         /* get quirk */
2858         for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2859                 if (of_property_read_bool(np, of_quirks[i].quirk))
2860                         pl330->quirks |= of_quirks[i].id;
2861
2862         res = &adev->res;
2863         pl330->base = devm_ioremap_resource(&adev->dev, res);
2864         if (IS_ERR(pl330->base))
2865                 return PTR_ERR(pl330->base);
2866
2867         amba_set_drvdata(adev, pl330);
2868
2869         for (i = 0; i < AMBA_NR_IRQS; i++) {
2870                 irq = adev->irq[i];
2871                 if (irq) {
2872                         ret = devm_request_irq(&adev->dev, irq,
2873                                                pl330_irq_handler, 0,
2874                                                dev_name(&adev->dev), pl330);
2875                         if (ret)
2876                                 return ret;
2877                 } else {
2878                         break;
2879                 }
2880         }
2881
2882         pcfg = &pl330->pcfg;
2883
2884         pcfg->periph_id = adev->periphid;
2885         ret = pl330_add(pl330);
2886         if (ret)
2887                 return ret;
2888
2889         INIT_LIST_HEAD(&pl330->desc_pool);
2890         spin_lock_init(&pl330->pool_lock);
2891
2892         /* Create a descriptor pool of default size */
2893         if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2894                 dev_warn(&adev->dev, "unable to allocate desc\n");
2895
2896         INIT_LIST_HEAD(&pd->channels);
2897
2898         /* Initialize channel parameters */
2899         if (pdat)
2900                 num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2901         else
2902                 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2903
2904         pl330->num_peripherals = num_chan;
2905
2906         pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2907         if (!pl330->peripherals) {
2908                 ret = -ENOMEM;
2909                 goto probe_err2;
2910         }
2911
2912         for (i = 0; i < num_chan; i++) {
2913                 pch = &pl330->peripherals[i];
2914                 if (!adev->dev.of_node)
2915                         pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2916                 else
2917                         pch->chan.private = adev->dev.of_node;
2918
2919                 INIT_LIST_HEAD(&pch->submitted_list);
2920                 INIT_LIST_HEAD(&pch->work_list);
2921                 INIT_LIST_HEAD(&pch->completed_list);
2922                 spin_lock_init(&pch->lock);
2923                 pch->thread = NULL;
2924                 pch->chan.device = pd;
2925                 pch->dmac = pl330;
2926
2927                 /* Add the channel to the DMAC list */
2928                 list_add_tail(&pch->chan.device_node, &pd->channels);
2929         }
2930
2931         if (pdat) {
2932                 pd->cap_mask = pdat->cap_mask;
2933         } else {
2934                 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2935                 if (pcfg->num_peri) {
2936                         dma_cap_set(DMA_SLAVE, pd->cap_mask);
2937                         dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2938                         dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2939                 }
2940         }
2941
2942         pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2943         pd->device_free_chan_resources = pl330_free_chan_resources;
2944         pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2945         pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2946         pd->device_tx_status = pl330_tx_status;
2947         pd->device_prep_slave_sg = pl330_prep_slave_sg;
2948         pd->device_config = pl330_config;
2949         pd->device_pause = pl330_pause;
2950         pd->device_terminate_all = pl330_terminate_all;
2951         pd->device_issue_pending = pl330_issue_pending;
2952         pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2953         pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2954         pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2955         pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2956         pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
2957                          1 : PL330_MAX_BURST);
2958
2959         ret = dma_async_device_register(pd);
2960         if (ret) {
2961                 dev_err(&adev->dev, "unable to register DMAC\n");
2962                 goto probe_err3;
2963         }
2964
2965         if (adev->dev.of_node) {
2966                 ret = of_dma_controller_register(adev->dev.of_node,
2967                                          of_dma_pl330_xlate, pl330);
2968                 if (ret) {
2969                         dev_err(&adev->dev,
2970                         "unable to register DMA to the generic DT DMA helpers\n");
2971                 }
2972         }
2973
2974         adev->dev.dma_parms = &pl330->dma_parms;
2975
2976         /*
2977          * This is the limit for transfers with a buswidth of 1, larger
2978          * buswidths will have larger limits.
2979          */
2980         ret = dma_set_max_seg_size(&adev->dev, 1900800);
2981         if (ret)
2982                 dev_err(&adev->dev, "unable to set the seg size\n");
2983
2984
2985         dev_info(&adev->dev,
2986                 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2987         dev_info(&adev->dev,
2988                 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2989                 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2990                 pcfg->num_peri, pcfg->num_events);
2991
2992         pm_runtime_irq_safe(&adev->dev);
2993         pm_runtime_use_autosuspend(&adev->dev);
2994         pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
2995         pm_runtime_mark_last_busy(&adev->dev);
2996         pm_runtime_put_autosuspend(&adev->dev);
2997
2998         return 0;
2999 probe_err3:
3000         /* Idle the DMAC */
3001         list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3002                         chan.device_node) {
3003
3004                 /* Remove the channel */
3005                 list_del(&pch->chan.device_node);
3006
3007                 /* Flush the channel */
3008                 if (pch->thread) {
3009                         pl330_terminate_all(&pch->chan);
3010                         pl330_free_chan_resources(&pch->chan);
3011                 }
3012         }
3013 probe_err2:
3014         pl330_del(pl330);
3015
3016         return ret;
3017 }
3018
3019 static int pl330_remove(struct amba_device *adev)
3020 {
3021         struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3022         struct dma_pl330_chan *pch, *_p;
3023         int i, irq;
3024
3025         pm_runtime_get_noresume(pl330->ddma.dev);
3026
3027         if (adev->dev.of_node)
3028                 of_dma_controller_free(adev->dev.of_node);
3029
3030         for (i = 0; i < AMBA_NR_IRQS; i++) {
3031                 irq = adev->irq[i];
3032                 devm_free_irq(&adev->dev, irq, pl330);
3033         }
3034
3035         dma_async_device_unregister(&pl330->ddma);
3036
3037         /* Idle the DMAC */
3038         list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3039                         chan.device_node) {
3040
3041                 /* Remove the channel */
3042                 list_del(&pch->chan.device_node);
3043
3044                 /* Flush the channel */
3045                 if (pch->thread) {
3046                         pl330_terminate_all(&pch->chan);
3047                         pl330_free_chan_resources(&pch->chan);
3048                 }
3049         }
3050
3051         pl330_del(pl330);
3052
3053         return 0;
3054 }
3055
3056 static struct amba_id pl330_ids[] = {
3057         {
3058                 .id     = 0x00041330,
3059                 .mask   = 0x000fffff,
3060         },
3061         { 0, 0 },
3062 };
3063
3064 MODULE_DEVICE_TABLE(amba, pl330_ids);
3065
3066 static struct amba_driver pl330_driver = {
3067         .drv = {
3068                 .owner = THIS_MODULE,
3069                 .name = "dma-pl330",
3070                 .pm = &pl330_pm,
3071         },
3072         .id_table = pl330_ids,
3073         .probe = pl330_probe,
3074         .remove = pl330_remove,
3075 };
3076
3077 module_amba_driver(pl330_driver);
3078
3079 MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3080 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3081 MODULE_LICENSE("GPL");