drivers/dma/edma.c

   1 /*
   2  * TI EDMA DMA engine driver
   3  *
   4  * Copyright 2012 Texas Instruments
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation version 2.
   9  *
  10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  11  * kind, whether express or implied; without even the implied warranty
  12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #include <linux/dmaengine.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/edma.h>
  19 #include <linux/err.h>
  20 #include <linux/init.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/list.h>
  23 #include <linux/module.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/slab.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/of.h>
  28 #include <linux/of_dma.h>
  29 #include <linux/of_irq.h>
  30 #include <linux/of_address.h>
  31 #include <linux/of_device.h>
  32 #include <linux/pm_runtime.h>
  33
  34 #include <linux/platform_data/edma.h>
  35
  36 #include "dmaengine.h"
  37 #include "virt-dma.h"
  38
  39 /* Offsets matching "struct edmacc_param" */
  40 #define PARM_OPT                0x00
  41 #define PARM_SRC                0x04
  42 #define PARM_A_B_CNT            0x08
  43 #define PARM_DST                0x0c
  44 #define PARM_SRC_DST_BIDX       0x10
  45 #define PARM_LINK_BCNTRLD       0x14
  46 #define PARM_SRC_DST_CIDX       0x18
  47 #define PARM_CCNT               0x1c
  48
  49 #define PARM_SIZE               0x20
  50
  51 /* Offsets for EDMA CC global channel registers and their shadows */
  52 #define SH_ER                   0x00    /* 64 bits */
  53 #define SH_ECR                  0x08    /* 64 bits */
  54 #define SH_ESR                  0x10    /* 64 bits */
  55 #define SH_CER                  0x18    /* 64 bits */
  56 #define SH_EER                  0x20    /* 64 bits */
  57 #define SH_EECR                 0x28    /* 64 bits */
  58 #define SH_EESR                 0x30    /* 64 bits */
  59 #define SH_SER                  0x38    /* 64 bits */
  60 #define SH_SECR                 0x40    /* 64 bits */
  61 #define SH_IER                  0x50    /* 64 bits */
  62 #define SH_IECR                 0x58    /* 64 bits */
  63 #define SH_IESR                 0x60    /* 64 bits */
  64 #define SH_IPR                  0x68    /* 64 bits */
  65 #define SH_ICR                  0x70    /* 64 bits */
  66 #define SH_IEVAL                0x78
  67 #define SH_QER                  0x80
  68 #define SH_QEER                 0x84
  69 #define SH_QEECR                0x88
  70 #define SH_QEESR                0x8c
  71 #define SH_QSER                 0x90
  72 #define SH_QSECR                0x94
  73 #define SH_SIZE                 0x200
  74
  75 /* Offsets for EDMA CC global registers */
  76 #define EDMA_REV                0x0000
  77 #define EDMA_CCCFG              0x0004
  78 #define EDMA_QCHMAP             0x0200  /* 8 registers */
  79 #define EDMA_DMAQNUM            0x0240  /* 8 registers (4 on OMAP-L1xx) */
  80 #define EDMA_QDMAQNUM           0x0260
  81 #define EDMA_QUETCMAP           0x0280
  82 #define EDMA_QUEPRI             0x0284
  83 #define EDMA_EMR                0x0300  /* 64 bits */
  84 #define EDMA_EMCR               0x0308  /* 64 bits */
  85 #define EDMA_QEMR               0x0310
  86 #define EDMA_QEMCR              0x0314
  87 #define EDMA_CCERR              0x0318
  88 #define EDMA_CCERRCLR           0x031c
  89 #define EDMA_EEVAL              0x0320
  90 #define EDMA_DRAE               0x0340  /* 4 x 64 bits*/
  91 #define EDMA_QRAE               0x0380  /* 4 registers */
  92 #define EDMA_QUEEVTENTRY        0x0400  /* 2 x 16 registers */
  93 #define EDMA_QSTAT              0x0600  /* 2 registers */
  94 #define EDMA_QWMTHRA            0x0620
  95 #define EDMA_QWMTHRB            0x0624
  96 #define EDMA_CCSTAT             0x0640
  97
  98 #define EDMA_M                  0x1000  /* global channel registers */
  99 #define EDMA_ECR                0x1008
 100 #define EDMA_ECRH               0x100C
 101 #define EDMA_SHADOW0            0x2000  /* 4 shadow regions */
 102 #define EDMA_PARM               0x4000  /* PaRAM entries */
 103
 104 #define PARM_OFFSET(param_no)   (EDMA_PARM + ((param_no) << 5))
 105
 106 #define EDMA_DCHMAP             0x0100  /* 64 registers */
 107
 108 /* CCCFG register */
 109 #define GET_NUM_DMACH(x)        (x & 0x7) /* bits 0-2 */
 110 #define GET_NUM_QDMACH(x)       ((x & 0x70) >> 4) /* bits 4-6 */
 111 #define GET_NUM_PAENTRY(x)      ((x & 0x7000) >> 12) /* bits 12-14 */
 112 #define GET_NUM_EVQUE(x)        ((x & 0x70000) >> 16) /* bits 16-18 */
 113 #define GET_NUM_REGN(x)         ((x & 0x300000) >> 20) /* bits 20-21 */
 114 #define CHMAP_EXIST             BIT(24)
 115
 116 /* CCSTAT register */
 117 #define EDMA_CCSTAT_ACTV        BIT(4)
 118
 119 /*
 120  * Max of 20 segments per channel to conserve PaRAM slots
 121  * Also note that MAX_NR_SG should be atleast the no.of periods
 122  * that are required for ASoC, otherwise DMA prep calls will
 123  * fail. Today davinci-pcm is the only user of this driver and
 124  * requires atleast 17 slots, so we setup the default to 20.
 125  */
 126 #define MAX_NR_SG               20
 127 #define EDMA_MAX_SLOTS          MAX_NR_SG
 128 #define EDMA_DESCRIPTORS        16
 129
 130 #define EDMA_CHANNEL_ANY                -1      /* for edma_alloc_channel() */
 131 #define EDMA_SLOT_ANY                   -1      /* for edma_alloc_slot() */
 132 #define EDMA_CONT_PARAMS_ANY             1001
 133 #define EDMA_CONT_PARAMS_FIXED_EXACT     1002
 134 #define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 135
 136 /* PaRAM slots are laid out like this */
 137 struct edmacc_param {
 138         u32 opt;
 139         u32 src;
 140         u32 a_b_cnt;
 141         u32 dst;
 142         u32 src_dst_bidx;
 143         u32 link_bcntrld;
 144         u32 src_dst_cidx;
 145         u32 ccnt;
 146 } __packed;
 147
 148 /* fields in edmacc_param.opt */
 149 #define SAM             BIT(0)
 150 #define DAM             BIT(1)
 151 #define SYNCDIM         BIT(2)
 152 #define STATIC          BIT(3)
 153 #define EDMA_FWID       (0x07 << 8)
 154 #define TCCMODE         BIT(11)
 155 #define EDMA_TCC(t)     ((t) << 12)
 156 #define TCINTEN         BIT(20)
 157 #define ITCINTEN        BIT(21)
 158 #define TCCHEN          BIT(22)
 159 #define ITCCHEN         BIT(23)
 160
 161 struct edma_pset {
 162         u32                             len;
 163         dma_addr_t                      addr;
 164         struct edmacc_param             param;
 165 };
 166
 167 struct edma_desc {
 168         struct virt_dma_desc            vdesc;
 169         struct list_head                node;
 170         enum dma_transfer_direction     direction;
 171         int                             cyclic;
 172         int                             absync;
 173         int                             pset_nr;
 174         struct edma_chan                *echan;
 175         int                             processed;
 176
 177         /*
 178          * The following 4 elements are used for residue accounting.
 179          *
 180          * - processed_stat: the number of SG elements we have traversed
 181          * so far to cover accounting. This is updated directly to processed
 182          * during edma_callback and is always <= processed, because processed
 183          * refers to the number of pending transfer (programmed to EDMA
 184          * controller), where as processed_stat tracks number of transfers
 185          * accounted for so far.
 186          *
 187          * - residue: The amount of bytes we have left to transfer for this desc
 188          *
 189          * - residue_stat: The residue in bytes of data we have covered
 190          * so far for accounting. This is updated directly to residue
 191          * during callbacks to keep it current.
 192          *
 193          * - sg_len: Tracks the length of the current intermediate transfer,
 194          * this is required to update the residue during intermediate transfer
 195          * completion callback.
 196          */
 197         int                             processed_stat;
 198         u32                             sg_len;
 199         u32                             residue;
 200         u32                             residue_stat;
 201
 202         struct edma_pset                pset[0];
 203 };
 204
 205 struct edma_cc;
 206
 207 struct edma_tc {
 208         struct device_node              *node;
 209         u16                             id;
 210 };
 211
 212 struct edma_chan {
 213         struct virt_dma_chan            vchan;
 214         struct list_head                node;
 215         struct edma_desc                *edesc;
 216         struct edma_cc                  *ecc;
 217         struct edma_tc                  *tc;
 218         int                             ch_num;
 219         bool                            alloced;
 220         bool                            hw_triggered;
 221         int                             slot[EDMA_MAX_SLOTS];
 222         int                             missed;
 223         struct dma_slave_config         cfg;
 224 };
 225
 226 struct edma_cc {
 227         struct device                   *dev;
 228         struct edma_soc_info            *info;
 229         void __iomem                    *base;
 230         int                             id;
 231         bool                            legacy_mode;
 232
 233         /* eDMA3 resource information */
 234         unsigned                        num_channels;
 235         unsigned                        num_qchannels;
 236         unsigned                        num_region;
 237         unsigned                        num_slots;
 238         unsigned                        num_tc;
 239         bool                            chmap_exist;
 240         enum dma_event_q                default_queue;
 241
 242         unsigned int                    ccint;
 243         unsigned int                    ccerrint;
 244
 245         /*
 246          * The slot_inuse bit for each PaRAM slot is clear unless the slot is
 247          * in use by Linux or if it is allocated to be used by DSP.
 248          */
 249         unsigned long *slot_inuse;
 250
 251         struct dma_device               dma_slave;
 252         struct dma_device               *dma_memcpy;
 253         struct edma_chan                *slave_chans;
 254         struct edma_tc                  *tc_list;
 255         int                             dummy_slot;
 256 };
 257
 258 /* dummy param set used to (re)initialize parameter RAM slots */
 259 static const struct edmacc_param dummy_paramset = {
 260         .link_bcntrld = 0xffff,
 261         .ccnt = 1,
 262 };
 263
 264 #define EDMA_BINDING_LEGACY     0
 265 #define EDMA_BINDING_TPCC       1
 266 static const u32 edma_binding_type[] = {
 267         [EDMA_BINDING_LEGACY] = EDMA_BINDING_LEGACY,
 268         [EDMA_BINDING_TPCC] = EDMA_BINDING_TPCC,
 269 };
 270
 271 static const struct of_device_id edma_of_ids[] = {
 272         {
 273                 .compatible = "ti,edma3",
 274                 .data = &edma_binding_type[EDMA_BINDING_LEGACY],
 275         },
 276         {
 277                 .compatible = "ti,edma3-tpcc",
 278                 .data = &edma_binding_type[EDMA_BINDING_TPCC],
 279         },
 280         {}
 281 };
 282 MODULE_DEVICE_TABLE(of, edma_of_ids);
 283
 284 static const struct of_device_id edma_tptc_of_ids[] = {
 285         { .compatible = "ti,edma3-tptc", },
 286         {}
 287 };
 288 MODULE_DEVICE_TABLE(of, edma_tptc_of_ids);
 289
 290 static inline unsigned int edma_read(struct edma_cc *ecc, int offset)
 291 {
 292         return (unsigned int)__raw_readl(ecc->base + offset);
 293 }
 294
 295 static inline void edma_write(struct edma_cc *ecc, int offset, int val)
 296 {
 297         __raw_writel(val, ecc->base + offset);
 298 }
 299
 300 static inline void edma_modify(struct edma_cc *ecc, int offset, unsigned and,
 301                                unsigned or)
 302 {
 303         unsigned val = edma_read(ecc, offset);
 304
 305         val &= and;
 306         val |= or;
 307         edma_write(ecc, offset, val);
 308 }
 309
 310 static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
 311 {
 312         unsigned val = edma_read(ecc, offset);
 313
 314         val &= and;
 315         edma_write(ecc, offset, val);
 316 }
 317
 318 static inline void edma_or(struct edma_cc *ecc, int offset, unsigned or)
 319 {
 320         unsigned val = edma_read(ecc, offset);
 321
 322         val |= or;
 323         edma_write(ecc, offset, val);
 324 }
 325
 326 static inline unsigned int edma_read_array(struct edma_cc *ecc, int offset,
 327                                            int i)
 328 {
 329         return edma_read(ecc, offset + (i << 2));
 330 }
 331
 332 static inline void edma_write_array(struct edma_cc *ecc, int offset, int i,
 333                                     unsigned val)
 334 {
 335         edma_write(ecc, offset + (i << 2), val);
 336 }
 337
 338 static inline void edma_modify_array(struct edma_cc *ecc, int offset, int i,
 339                                      unsigned and, unsigned or)
 340 {
 341         edma_modify(ecc, offset + (i << 2), and, or);
 342 }
 343
 344 static inline void edma_or_array(struct edma_cc *ecc, int offset, int i,
 345                                  unsigned or)
 346 {
 347         edma_or(ecc, offset + (i << 2), or);
 348 }
 349
 350 static inline void edma_or_array2(struct edma_cc *ecc, int offset, int i, int j,
 351                                   unsigned or)
 352 {
 353         edma_or(ecc, offset + ((i * 2 + j) << 2), or);
 354 }
 355
 356 static inline void edma_write_array2(struct edma_cc *ecc, int offset, int i,
 357                                      int j, unsigned val)
 358 {
 359         edma_write(ecc, offset + ((i * 2 + j) << 2), val);
 360 }
 361
 362 static inline unsigned int edma_shadow0_read(struct edma_cc *ecc, int offset)
 363 {
 364         return edma_read(ecc, EDMA_SHADOW0 + offset);
 365 }
 366
 367 static inline unsigned int edma_shadow0_read_array(struct edma_cc *ecc,
 368                                                    int offset, int i)
 369 {
 370         return edma_read(ecc, EDMA_SHADOW0 + offset + (i << 2));
 371 }
 372
 373 static inline void edma_shadow0_write(struct edma_cc *ecc, int offset,
 374                                       unsigned val)
 375 {
 376         edma_write(ecc, EDMA_SHADOW0 + offset, val);
 377 }
 378
 379 static inline void edma_shadow0_write_array(struct edma_cc *ecc, int offset,
 380                                             int i, unsigned val)
 381 {
 382         edma_write(ecc, EDMA_SHADOW0 + offset + (i << 2), val);
 383 }
 384
 385 static inline unsigned int edma_param_read(struct edma_cc *ecc, int offset,
 386                                            int param_no)
 387 {
 388         return edma_read(ecc, EDMA_PARM + offset + (param_no << 5));
 389 }
 390
 391 static inline void edma_param_write(struct edma_cc *ecc, int offset,
 392                                     int param_no, unsigned val)
 393 {
 394         edma_write(ecc, EDMA_PARM + offset + (param_no << 5), val);
 395 }
 396
 397 static inline void edma_param_modify(struct edma_cc *ecc, int offset,
 398                                      int param_no, unsigned and, unsigned or)
 399 {
 400         edma_modify(ecc, EDMA_PARM + offset + (param_no << 5), and, or);
 401 }
 402
 403 static inline void edma_param_and(struct edma_cc *ecc, int offset, int param_no,
 404                                   unsigned and)
 405 {
 406         edma_and(ecc, EDMA_PARM + offset + (param_no << 5), and);
 407 }
 408
 409 static inline void edma_param_or(struct edma_cc *ecc, int offset, int param_no,
 410                                  unsigned or)
 411 {
 412         edma_or(ecc, EDMA_PARM + offset + (param_no << 5), or);
 413 }
 414
 415 static inline void edma_set_bits(int offset, int len, unsigned long *p)
 416 {
 417         for (; len > 0; len--)
 418                 set_bit(offset + (len - 1), p);
 419 }
 420
 421 static void edma_assign_priority_to_queue(struct edma_cc *ecc, int queue_no,
 422                                           int priority)
 423 {
 424         int bit = queue_no * 4;
 425
 426         edma_modify(ecc, EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
 427 }
 428
 429 static void edma_set_chmap(struct edma_chan *echan, int slot)
 430 {
 431         struct edma_cc *ecc = echan->ecc;
 432         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 433
 434         if (ecc->chmap_exist) {
 435                 slot = EDMA_CHAN_SLOT(slot);
 436                 edma_write_array(ecc, EDMA_DCHMAP, channel, (slot << 5));
 437         }
 438 }
 439
 440 static void edma_setup_interrupt(struct edma_chan *echan, bool enable)
 441 {
 442         struct edma_cc *ecc = echan->ecc;
 443         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 444
 445         if (enable) {
 446                 edma_shadow0_write_array(ecc, SH_ICR, channel >> 5,
 447                                          BIT(channel & 0x1f));
 448                 edma_shadow0_write_array(ecc, SH_IESR, channel >> 5,
 449                                          BIT(channel & 0x1f));
 450         } else {
 451                 edma_shadow0_write_array(ecc, SH_IECR, channel >> 5,
 452                                          BIT(channel & 0x1f));
 453         }
 454 }
 455
 456 /*
 457  * paRAM slot management functions
 458  */
 459 static void edma_write_slot(struct edma_cc *ecc, unsigned slot,
 460                             const struct edmacc_param *param)
 461 {
 462         slot = EDMA_CHAN_SLOT(slot);
 463         if (slot >= ecc->num_slots)
 464                 return;
 465         memcpy_toio(ecc->base + PARM_OFFSET(slot), param, PARM_SIZE);
 466 }
 467
 468 static int edma_read_slot(struct edma_cc *ecc, unsigned slot,
 469                            struct edmacc_param *param)
 470 {
 471         slot = EDMA_CHAN_SLOT(slot);
 472         if (slot >= ecc->num_slots)
 473                 return -EINVAL;
 474         memcpy_fromio(param, ecc->base + PARM_OFFSET(slot), PARM_SIZE);
 475
 476         return 0;
 477 }
 478
 479 /**
 480  * edma_alloc_slot - allocate DMA parameter RAM
 481  * @ecc: pointer to edma_cc struct
 482  * @slot: specific slot to allocate; negative for "any unused slot"
 483  *
 484  * This allocates a parameter RAM slot, initializing it to hold a
 485  * dummy transfer.  Slots allocated using this routine have not been
 486  * mapped to a hardware DMA channel, and will normally be used by
 487  * linking to them from a slot associated with a DMA channel.
 488  *
 489  * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
 490  * slots may be allocated on behalf of DSP firmware.
 491  *
 492  * Returns the number of the slot, else negative errno.
 493  */
 494 static int edma_alloc_slot(struct edma_cc *ecc, int slot)
 495 {
 496         if (slot >= 0) {
 497                 slot = EDMA_CHAN_SLOT(slot);
 498                 /* Requesting entry paRAM slot for a HW triggered channel. */
 499                 if (ecc->chmap_exist && slot < ecc->num_channels)
 500                         slot = EDMA_SLOT_ANY;
 501         }
 502
 503         if (slot < 0) {
 504                 if (ecc->chmap_exist)
 505                         slot = 0;
 506                 else
 507                         slot = ecc->num_channels;
 508                 for (;;) {
 509                         slot = find_next_zero_bit(ecc->slot_inuse,
 510                                                   ecc->num_slots,
 511                                                   slot);
 512                         if (slot == ecc->num_slots)
 513                                 return -ENOMEM;
 514                         if (!test_and_set_bit(slot, ecc->slot_inuse))
 515                                 break;
 516                 }
 517         } else if (slot >= ecc->num_slots) {
 518                 return -EINVAL;
 519         } else if (test_and_set_bit(slot, ecc->slot_inuse)) {
 520                 return -EBUSY;
 521         }
 522
 523         edma_write_slot(ecc, slot, &dummy_paramset);
 524
 525         return EDMA_CTLR_CHAN(ecc->id, slot);
 526 }
 527
 528 static void edma_free_slot(struct edma_cc *ecc, unsigned slot)
 529 {
 530         slot = EDMA_CHAN_SLOT(slot);
 531         if (slot >= ecc->num_slots)
 532                 return;
 533
 534         edma_write_slot(ecc, slot, &dummy_paramset);
 535         clear_bit(slot, ecc->slot_inuse);
 536 }
 537
 538 /**
 539  * edma_link - link one parameter RAM slot to another
 540  * @ecc: pointer to edma_cc struct
 541  * @from: parameter RAM slot originating the link
 542  * @to: parameter RAM slot which is the link target
 543  *
 544  * The originating slot should not be part of any active DMA transfer.
 545  */
 546 static void edma_link(struct edma_cc *ecc, unsigned from, unsigned to)
 547 {
 548         if (unlikely(EDMA_CTLR(from) != EDMA_CTLR(to)))
 549                 dev_warn(ecc->dev, "Ignoring eDMA instance for linking\n");
 550
 551         from = EDMA_CHAN_SLOT(from);
 552         to = EDMA_CHAN_SLOT(to);
 553         if (from >= ecc->num_slots || to >= ecc->num_slots)
 554                 return;
 555
 556         edma_param_modify(ecc, PARM_LINK_BCNTRLD, from, 0xffff0000,
 557                           PARM_OFFSET(to));
 558 }
 559
 560 /**
 561  * edma_get_position - returns the current transfer point
 562  * @ecc: pointer to edma_cc struct
 563  * @slot: parameter RAM slot being examined
 564  * @dst:  true selects the dest position, false the source
 565  *
 566  * Returns the position of the current active slot
 567  */
 568 static dma_addr_t edma_get_position(struct edma_cc *ecc, unsigned slot,
 569                                     bool dst)
 570 {
 571         u32 offs;
 572
 573         slot = EDMA_CHAN_SLOT(slot);
 574         offs = PARM_OFFSET(slot);
 575         offs += dst ? PARM_DST : PARM_SRC;
 576
 577         return edma_read(ecc, offs);
 578 }
 579
 580 /*
 581  * Channels with event associations will be triggered by their hardware
 582  * events, and channels without such associations will be triggered by
 583  * software.  (At this writing there is no interface for using software
 584  * triggers except with channels that don't support hardware triggers.)
 585  */
 586 static void edma_start(struct edma_chan *echan)
 587 {
 588         struct edma_cc *ecc = echan->ecc;
 589         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 590         int j = (channel >> 5);
 591         unsigned int mask = BIT(channel & 0x1f);
 592
 593         if (!echan->hw_triggered) {
 594                 /* EDMA channels without event association */
 595                 dev_dbg(ecc->dev, "ESR%d %08x\n", j,
 596                         edma_shadow0_read_array(ecc, SH_ESR, j));
 597                 edma_shadow0_write_array(ecc, SH_ESR, j, mask);
 598         } else {
 599                 /* EDMA channel with event association */
 600                 dev_dbg(ecc->dev, "ER%d %08x\n", j,
 601                         edma_shadow0_read_array(ecc, SH_ER, j));
 602                 /* Clear any pending event or error */
 603                 edma_write_array(ecc, EDMA_ECR, j, mask);
 604                 edma_write_array(ecc, EDMA_EMCR, j, mask);
 605                 /* Clear any SER */
 606                 edma_shadow0_write_array(ecc, SH_SECR, j, mask);
 607                 edma_shadow0_write_array(ecc, SH_EESR, j, mask);
 608                 dev_dbg(ecc->dev, "EER%d %08x\n", j,
 609                         edma_shadow0_read_array(ecc, SH_EER, j));
 610         }
 611 }
 612
 613 static void edma_stop(struct edma_chan *echan)
 614 {
 615         struct edma_cc *ecc = echan->ecc;
 616         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 617         int j = (channel >> 5);
 618         unsigned int mask = BIT(channel & 0x1f);
 619
 620         edma_shadow0_write_array(ecc, SH_EECR, j, mask);
 621         edma_shadow0_write_array(ecc, SH_ECR, j, mask);
 622         edma_shadow0_write_array(ecc, SH_SECR, j, mask);
 623         edma_write_array(ecc, EDMA_EMCR, j, mask);
 624
 625         /* clear possibly pending completion interrupt */
 626         edma_shadow0_write_array(ecc, SH_ICR, j, mask);
 627
 628         dev_dbg(ecc->dev, "EER%d %08x\n", j,
 629                 edma_shadow0_read_array(ecc, SH_EER, j));
 630
 631         /* REVISIT:  consider guarding against inappropriate event
 632          * chaining by overwriting with dummy_paramset.
 633          */
 634 }
 635
 636 /*
 637  * Temporarily disable EDMA hardware events on the specified channel,
 638  * preventing them from triggering new transfers
 639  */
 640 static void edma_pause(struct edma_chan *echan)
 641 {
 642         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 643         unsigned int mask = BIT(channel & 0x1f);
 644
 645         edma_shadow0_write_array(echan->ecc, SH_EECR, channel >> 5, mask);
 646 }
 647
 648 /* Re-enable EDMA hardware events on the specified channel.  */
 649 static void edma_resume(struct edma_chan *echan)
 650 {
 651         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 652         unsigned int mask = BIT(channel & 0x1f);
 653
 654         edma_shadow0_write_array(echan->ecc, SH_EESR, channel >> 5, mask);
 655 }
 656
 657 static void edma_trigger_channel(struct edma_chan *echan)
 658 {
 659         struct edma_cc *ecc = echan->ecc;
 660         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 661         unsigned int mask = BIT(channel & 0x1f);
 662
 663         edma_shadow0_write_array(ecc, SH_ESR, (channel >> 5), mask);
 664
 665         dev_dbg(ecc->dev, "ESR%d %08x\n", (channel >> 5),
 666                 edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
 667 }
 668
 669 static void edma_clean_channel(struct edma_chan *echan)
 670 {
 671         struct edma_cc *ecc = echan->ecc;
 672         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 673         int j = (channel >> 5);
 674         unsigned int mask = BIT(channel & 0x1f);
 675
 676         dev_dbg(ecc->dev, "EMR%d %08x\n", j, edma_read_array(ecc, EDMA_EMR, j));
 677         edma_shadow0_write_array(ecc, SH_ECR, j, mask);
 678         /* Clear the corresponding EMR bits */
 679         edma_write_array(ecc, EDMA_EMCR, j, mask);
 680         /* Clear any SER */
 681         edma_shadow0_write_array(ecc, SH_SECR, j, mask);
 682         edma_write(ecc, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
 683 }
 684
 685 /* Move channel to a specific event queue */
 686 static void edma_assign_channel_eventq(struct edma_chan *echan,
 687                                        enum dma_event_q eventq_no)
 688 {
 689         struct edma_cc *ecc = echan->ecc;
 690         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 691         int bit = (channel & 0x7) * 4;
 692
 693         /* default to low priority queue */
 694         if (eventq_no == EVENTQ_DEFAULT)
 695                 eventq_no = ecc->default_queue;
 696         if (eventq_no >= ecc->num_tc)
 697                 return;
 698
 699         eventq_no &= 7;
 700         edma_modify_array(ecc, EDMA_DMAQNUM, (channel >> 3), ~(0x7 << bit),
 701                           eventq_no << bit);
 702 }
 703
 704 static int edma_alloc_channel(struct edma_chan *echan,
 705                               enum dma_event_q eventq_no)
 706 {
 707         struct edma_cc *ecc = echan->ecc;
 708         int channel = EDMA_CHAN_SLOT(echan->ch_num);
 709
 710         /* ensure access through shadow region 0 */
 711         edma_or_array2(ecc, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
 712
 713         /* ensure no events are pending */
 714         edma_stop(echan);
 715
 716         edma_setup_interrupt(echan, true);
 717
 718         edma_assign_channel_eventq(echan, eventq_no);
 719
 720         return 0;
 721 }
 722
 723 static void edma_free_channel(struct edma_chan *echan)
 724 {
 725         /* ensure no events are pending */
 726         edma_stop(echan);
 727         /* REVISIT should probably take out of shadow region 0 */
 728         edma_setup_interrupt(echan, false);
 729 }
 730
 731 static inline struct edma_cc *to_edma_cc(struct dma_device *d)
 732 {
 733         return container_of(d, struct edma_cc, dma_slave);
 734 }
 735
 736 static inline struct edma_chan *to_edma_chan(struct dma_chan *c)
 737 {
 738         return container_of(c, struct edma_chan, vchan.chan);
 739 }
 740
 741 static inline struct edma_desc *to_edma_desc(struct dma_async_tx_descriptor *tx)
 742 {
 743         return container_of(tx, struct edma_desc, vdesc.tx);
 744 }
 745
 746 static void edma_desc_free(struct virt_dma_desc *vdesc)
 747 {
 748         kfree(container_of(vdesc, struct edma_desc, vdesc));
 749 }
 750
 751 /* Dispatch a queued descriptor to the controller (caller holds lock) */
 752 static void edma_execute(struct edma_chan *echan)
 753 {
 754         struct edma_cc *ecc = echan->ecc;
 755         struct virt_dma_desc *vdesc;
 756         struct edma_desc *edesc;
 757         struct device *dev = echan->vchan.chan.device->dev;
 758         int i, j, left, nslots;
 759
 760         if (!echan->edesc) {
 761                 /* Setup is needed for the first transfer */
 762                 vdesc = vchan_next_desc(&echan->vchan);
 763                 if (!vdesc)
 764                         return;
 765                 list_del(&vdesc->node);
 766                 echan->edesc = to_edma_desc(&vdesc->tx);
 767         }
 768
 769         edesc = echan->edesc;
 770
 771         /* Find out how many left */
 772         left = edesc->pset_nr - edesc->processed;
 773         nslots = min(MAX_NR_SG, left);
 774         edesc->sg_len = 0;
 775
 776         /* Write descriptor PaRAM set(s) */
 777         for (i = 0; i < nslots; i++) {
 778                 j = i + edesc->processed;
 779                 edma_write_slot(ecc, echan->slot[i], &edesc->pset[j].param);
 780                 edesc->sg_len += edesc->pset[j].len;
 781                 dev_vdbg(dev,
 782                          "\n pset[%d]:\n"
 783                          "  chnum\t%d\n"
 784                          "  slot\t%d\n"
 785                          "  opt\t%08x\n"
 786                          "  src\t%08x\n"
 787                          "  dst\t%08x\n"
 788                          "  abcnt\t%08x\n"
 789                          "  ccnt\t%08x\n"
 790                          "  bidx\t%08x\n"
 791                          "  cidx\t%08x\n"
 792                          "  lkrld\t%08x\n",
 793                          j, echan->ch_num, echan->slot[i],
 794                          edesc->pset[j].param.opt,
 795                          edesc->pset[j].param.src,
 796                          edesc->pset[j].param.dst,
 797                          edesc->pset[j].param.a_b_cnt,
 798                          edesc->pset[j].param.ccnt,
 799                          edesc->pset[j].param.src_dst_bidx,
 800                          edesc->pset[j].param.src_dst_cidx,
 801                          edesc->pset[j].param.link_bcntrld);
 802                 /* Link to the previous slot if not the last set */
 803                 if (i != (nslots - 1))
 804                         edma_link(ecc, echan->slot[i], echan->slot[i + 1]);
 805         }
 806
 807         edesc->processed += nslots;
 808
 809         /*
 810          * If this is either the last set in a set of SG-list transactions
 811          * then setup a link to the dummy slot, this results in all future
 812          * events being absorbed and that's OK because we're done
 813          */
 814         if (edesc->processed == edesc->pset_nr) {
 815                 if (edesc->cyclic)
 816                         edma_link(ecc, echan->slot[nslots - 1], echan->slot[1]);
 817                 else
 818                         edma_link(ecc, echan->slot[nslots - 1],
 819                                   echan->ecc->dummy_slot);
 820         }
 821
 822         if (echan->missed) {
 823                 /*
 824                  * This happens due to setup times between intermediate
 825                  * transfers in long SG lists which have to be broken up into
 826                  * transfers of MAX_NR_SG
 827                  */
 828                 dev_dbg(dev, "missed event on channel %d\n", echan->ch_num);
 829                 edma_clean_channel(echan);
 830                 edma_stop(echan);
 831                 edma_start(echan);
 832                 edma_trigger_channel(echan);
 833                 echan->missed = 0;
 834         } else if (edesc->processed <= MAX_NR_SG) {
 835                 dev_dbg(dev, "first transfer starting on channel %d\n",
 836                         echan->ch_num);
 837                 edma_start(echan);
 838         } else {
 839                 dev_dbg(dev, "chan: %d: completed %d elements, resuming\n",
 840                         echan->ch_num, edesc->processed);
 841                 edma_resume(echan);
 842         }
 843 }
 844
 845 static int edma_terminate_all(struct dma_chan *chan)
 846 {
 847         struct edma_chan *echan = to_edma_chan(chan);
 848         unsigned long flags;
 849         LIST_HEAD(head);
 850
 851         spin_lock_irqsave(&echan->vchan.lock, flags);
 852
 853         /*
 854          * Stop DMA activity: we assume the callback will not be called
 855          * after edma_dma() returns (even if it does, it will see
 856          * echan->edesc is NULL and exit.)
 857          */
 858         if (echan->edesc) {
 859                 edma_stop(echan);
 860                 /* Move the cyclic channel back to default queue */
 861                 if (!echan->tc && echan->edesc->cyclic)
 862                         edma_assign_channel_eventq(echan, EVENTQ_DEFAULT);
 863
 864                 vchan_terminate_vdesc(&echan->edesc->vdesc);
 865                 echan->edesc = NULL;
 866         }
 867
 868         vchan_get_all_descriptors(&echan->vchan, &head);
 869         spin_unlock_irqrestore(&echan->vchan.lock, flags);
 870         vchan_dma_desc_free_list(&echan->vchan, &head);
 871
 872         return 0;
 873 }
 874
 875 static void edma_synchronize(struct dma_chan *chan)
 876 {
 877         struct edma_chan *echan = to_edma_chan(chan);
 878
 879         vchan_synchronize(&echan->vchan);
 880 }
 881
 882 static int edma_slave_config(struct dma_chan *chan,
 883         struct dma_slave_config *cfg)
 884 {
 885         struct edma_chan *echan = to_edma_chan(chan);
 886
 887         if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
 888             cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
 889                 return -EINVAL;
 890
 891         if (cfg->src_maxburst > chan->device->max_burst ||
 892             cfg->dst_maxburst > chan->device->max_burst)
 893                 return -EINVAL;
 894
 895         memcpy(&echan->cfg, cfg, sizeof(echan->cfg));
 896
 897         return 0;
 898 }
 899
 900 static int edma_dma_pause(struct dma_chan *chan)
 901 {
 902         struct edma_chan *echan = to_edma_chan(chan);
 903
 904         if (!echan->edesc)
 905                 return -EINVAL;
 906
 907         edma_pause(echan);
 908         return 0;
 909 }
 910
 911 static int edma_dma_resume(struct dma_chan *chan)
 912 {
 913         struct edma_chan *echan = to_edma_chan(chan);
 914
 915         edma_resume(echan);
 916         return 0;
 917 }
 918
 919 /*
 920  * A PaRAM set configuration abstraction used by other modes
 921  * @chan: Channel who's PaRAM set we're configuring
 922  * @pset: PaRAM set to initialize and setup.
 923  * @src_addr: Source address of the DMA
 924  * @dst_addr: Destination address of the DMA
 925  * @burst: In units of dev_width, how much to send
 926  * @dev_width: How much is the dev_width
 927  * @dma_length: Total length of the DMA transfer
 928  * @direction: Direction of the transfer
 929  */
 930 static int edma_config_pset(struct dma_chan *chan, struct edma_pset *epset,
 931                             dma_addr_t src_addr, dma_addr_t dst_addr, u32 burst,
 932                             unsigned int acnt, unsigned int dma_length,
 933                             enum dma_transfer_direction direction)
 934 {
 935         struct edma_chan *echan = to_edma_chan(chan);
 936         struct device *dev = chan->device->dev;
 937         struct edmacc_param *param = &epset->param;
 938         int bcnt, ccnt, cidx;
 939         int src_bidx, dst_bidx, src_cidx, dst_cidx;
 940         int absync;
 941
 942         /* src/dst_maxburst == 0 is the same case as src/dst_maxburst == 1 */
 943         if (!burst)
 944                 burst = 1;
 945         /*
 946          * If the maxburst is equal to the fifo width, use
 947          * A-synced transfers. This allows for large contiguous
 948          * buffer transfers using only one PaRAM set.
 949          */
 950         if (burst == 1) {
 951                 /*
 952                  * For the A-sync case, bcnt and ccnt are the remainder
 953                  * and quotient respectively of the division of:
 954                  * (dma_length / acnt) by (SZ_64K -1). This is so
 955                  * that in case bcnt over flows, we have ccnt to use.
 956                  * Note: In A-sync tranfer only, bcntrld is used, but it
 957                  * only applies for sg_dma_len(sg) >= SZ_64K.
 958                  * In this case, the best way adopted is- bccnt for the
 959                  * first frame will be the remainder below. Then for
 960                  * every successive frame, bcnt will be SZ_64K-1. This
 961                  * is assured as bcntrld = 0xffff in end of function.
 962                  */
 963                 absync = false;
 964                 ccnt = dma_length / acnt / (SZ_64K - 1);
 965                 bcnt = dma_length / acnt - ccnt * (SZ_64K - 1);
 966                 /*
 967                  * If bcnt is non-zero, we have a remainder and hence an
 968                  * extra frame to transfer, so increment ccnt.
 969                  */
 970                 if (bcnt)
 971                         ccnt++;
 972                 else
 973                         bcnt = SZ_64K - 1;
 974                 cidx = acnt;
 975         } else {
 976                 /*
 977                  * If maxburst is greater than the fifo address_width,
 978                  * use AB-synced transfers where A count is the fifo
 979                  * address_width and B count is the maxburst. In this
 980                  * case, we are limited to transfers of C count frames
 981                  * of (address_width * maxburst) where C count is limited
 982                  * to SZ_64K-1. This places an upper bound on the length
 983                  * of an SG segment that can be handled.
 984                  */
 985                 absync = true;
 986                 bcnt = burst;
 987                 ccnt = dma_length / (acnt * bcnt);
 988                 if (ccnt > (SZ_64K - 1)) {
 989                         dev_err(dev, "Exceeded max SG segment size\n");
 990                         return -EINVAL;
 991                 }
 992                 cidx = acnt * bcnt;
 993         }
 994
 995         epset->len = dma_length;
 996
 997         if (direction == DMA_MEM_TO_DEV) {
 998                 src_bidx = acnt;
 999                 src_cidx = cidx;
1000                 dst_bidx = 0;
1001                 dst_cidx = 0;
1002                 epset->addr = src_addr;
1003         } else if (direction == DMA_DEV_TO_MEM)  {
1004                 src_bidx = 0;
1005                 src_cidx = 0;
1006                 dst_bidx = acnt;
1007                 dst_cidx = cidx;
1008                 epset->addr = dst_addr;
1009         } else if (direction == DMA_MEM_TO_MEM)  {
1010                 src_bidx = acnt;
1011                 src_cidx = cidx;
1012                 dst_bidx = acnt;
1013                 dst_cidx = cidx;
1014         } else {
1015                 dev_err(dev, "%s: direction not implemented yet\n", __func__);
1016                 return -EINVAL;
1017         }
1018
1019         param->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
1020         /* Configure A or AB synchronized transfers */
1021         if (absync)
1022                 param->opt |= SYNCDIM;
1023
1024         param->src = src_addr;
1025         param->dst = dst_addr;
1026
1027         param->src_dst_bidx = (dst_bidx << 16) | src_bidx;
1028         param->src_dst_cidx = (dst_cidx << 16) | src_cidx;
1029
1030         param->a_b_cnt = bcnt << 16 | acnt;
1031         param->ccnt = ccnt;
1032         /*
1033          * Only time when (bcntrld) auto reload is required is for
1034          * A-sync case, and in this case, a requirement of reload value
1035          * of SZ_64K-1 only is assured. 'link' is initially set to NULL
1036          * and then later will be populated by edma_execute.
1037          */
1038         param->link_bcntrld = 0xffffffff;
1039         return absync;
1040 }
1041
1042 static struct dma_async_tx_descriptor *edma_prep_slave_sg(
1043         struct dma_chan *chan, struct scatterlist *sgl,
1044         unsigned int sg_len, enum dma_transfer_direction direction,
1045         unsigned long tx_flags, void *context)
1046 {
1047         struct edma_chan *echan = to_edma_chan(chan);
1048         struct device *dev = chan->device->dev;
1049         struct edma_desc *edesc;
1050         dma_addr_t src_addr = 0, dst_addr = 0;
1051         enum dma_slave_buswidth dev_width;
1052         u32 burst;
1053         struct scatterlist *sg;
1054         int i, nslots, ret;
1055
1056         if (unlikely(!echan || !sgl || !sg_len))
1057                 return NULL;
1058
1059         if (direction == DMA_DEV_TO_MEM) {
1060                 src_addr = echan->cfg.src_addr;
1061                 dev_width = echan->cfg.src_addr_width;
1062                 burst = echan->cfg.src_maxburst;
1063         } else if (direction == DMA_MEM_TO_DEV) {
1064                 dst_addr = echan->cfg.dst_addr;
1065                 dev_width = echan->cfg.dst_addr_width;
1066                 burst = echan->cfg.dst_maxburst;
1067         } else {
1068                 dev_err(dev, "%s: bad direction: %d\n", __func__, direction);
1069                 return NULL;
1070         }
1071
1072         if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
1073                 dev_err(dev, "%s: Undefined slave buswidth\n", __func__);
1074                 return NULL;
1075         }
1076
1077         edesc = kzalloc(sizeof(*edesc) + sg_len * sizeof(edesc->pset[0]),
1078                         GFP_ATOMIC);
1079         if (!edesc)
1080                 return NULL;
1081
1082         edesc->pset_nr = sg_len;
1083         edesc->residue = 0;
1084         edesc->direction = direction;
1085         edesc->echan = echan;
1086
1087         /* Allocate a PaRAM slot, if needed */
1088         nslots = min_t(unsigned, MAX_NR_SG, sg_len);
1089
1090         for (i = 0; i < nslots; i++) {
1091                 if (echan->slot[i] < 0) {
1092                         echan->slot[i] =
1093                                 edma_alloc_slot(echan->ecc, EDMA_SLOT_ANY);
1094                         if (echan->slot[i] < 0) {
1095                                 kfree(edesc);
1096                                 dev_err(dev, "%s: Failed to allocate slot\n",
1097                                         __func__);
1098                                 return NULL;
1099                         }
1100                 }
1101         }
1102
1103         /* Configure PaRAM sets for each SG */
1104         for_each_sg(sgl, sg, sg_len, i) {
1105                 /* Get address for each SG */
1106                 if (direction == DMA_DEV_TO_MEM)
1107                         dst_addr = sg_dma_address(sg);
1108                 else
1109                         src_addr = sg_dma_address(sg);
1110
1111                 ret = edma_config_pset(chan, &edesc->pset[i], src_addr,
1112                                        dst_addr, burst, dev_width,
1113                                        sg_dma_len(sg), direction);
1114                 if (ret < 0) {
1115                         kfree(edesc);
1116                         return NULL;
1117                 }
1118
1119                 edesc->absync = ret;
1120                 edesc->residue += sg_dma_len(sg);
1121
1122                 if (i == sg_len - 1)
1123                         /* Enable completion interrupt */
1124                         edesc->pset[i].param.opt |= TCINTEN;
1125                 else if (!((i+1) % MAX_NR_SG))
1126                         /*
1127                          * Enable early completion interrupt for the
1128                          * intermediateset. In this case the driver will be
1129                          * notified when the paRAM set is submitted to TC. This
1130                          * will allow more time to set up the next set of slots.
1131                          */
1132                         edesc->pset[i].param.opt |= (TCINTEN | TCCMODE);
1133         }
1134         edesc->residue_stat = edesc->residue;
1135
1136         return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
1137 }
1138
1139 static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
1140         struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
1141         size_t len, unsigned long tx_flags)
1142 {
1143         int ret, nslots;
1144         struct edma_desc *edesc;
1145         struct device *dev = chan->device->dev;
1146         struct edma_chan *echan = to_edma_chan(chan);
1147         unsigned int width, pset_len, array_size;
1148
1149         if (unlikely(!echan || !len))
1150                 return NULL;
1151
1152         /* Align the array size (acnt block) with the transfer properties */
1153         switch (__ffs((src | dest | len))) {
1154         case 0:
1155                 array_size = SZ_32K - 1;
1156                 break;
1157         case 1:
1158                 array_size = SZ_32K - 2;
1159                 break;
1160         default:
1161                 array_size = SZ_32K - 4;
1162                 break;
1163         }
1164
1165         if (len < SZ_64K) {
1166                 /*
1167                  * Transfer size less than 64K can be handled with one paRAM
1168                  * slot and with one burst.
1169                  * ACNT = length
1170                  */
1171                 width = len;
1172                 pset_len = len;
1173                 nslots = 1;
1174         } else {
1175                 /*
1176                  * Transfer size bigger than 64K will be handled with maximum of
1177                  * two paRAM slots.
1178                  * slot1: (full_length / 32767) times 32767 bytes bursts.
1179                  *        ACNT = 32767, length1: (full_length / 32767) * 32767
1180                  * slot2: the remaining amount of data after slot1.
1181                  *        ACNT = full_length - length1, length2 = ACNT
1182                  *
1183                  * When the full_length is multibple of 32767 one slot can be
1184                  * used to complete the transfer.
1185                  */
1186                 width = array_size;
1187                 pset_len = rounddown(len, width);
1188                 /* One slot is enough for lengths multiple of (SZ_32K -1) */
1189                 if (unlikely(pset_len == len))
1190                         nslots = 1;
1191                 else
1192                         nslots = 2;
1193         }
1194
1195         edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
1196                         GFP_ATOMIC);
1197         if (!edesc)
1198                 return NULL;
1199
1200         edesc->pset_nr = nslots;
1201         edesc->residue = edesc->residue_stat = len;
1202         edesc->direction = DMA_MEM_TO_MEM;
1203         edesc->echan = echan;
1204
1205         ret = edma_config_pset(chan, &edesc->pset[0], src, dest, 1,
1206                                width, pset_len, DMA_MEM_TO_MEM);
1207         if (ret < 0) {
1208                 kfree(edesc);
1209                 return NULL;
1210         }
1211
1212         edesc->absync = ret;
1213
1214         edesc->pset[0].param.opt |= ITCCHEN;
1215         if (nslots == 1) {
1216                 /* Enable transfer complete interrupt */
1217                 edesc->pset[0].param.opt |= TCINTEN;
1218         } else {
1219                 /* Enable transfer complete chaining for the first slot */
1220                 edesc->pset[0].param.opt |= TCCHEN;
1221
1222                 if (echan->slot[1] < 0) {
1223                         echan->slot[1] = edma_alloc_slot(echan->ecc,
1224                                                          EDMA_SLOT_ANY);
1225                         if (echan->slot[1] < 0) {
1226                                 kfree(edesc);
1227                                 dev_err(dev, "%s: Failed to allocate slot\n",
1228                                         __func__);
1229                                 return NULL;
1230                         }
1231                 }
1232                 dest += pset_len;
1233                 src += pset_len;
1234                 pset_len = width = len % array_size;
1235
1236                 ret = edma_config_pset(chan, &edesc->pset[1], src, dest, 1,
1237                                        width, pset_len, DMA_MEM_TO_MEM);
1238                 if (ret < 0) {
1239                         kfree(edesc);
1240                         return NULL;
1241                 }
1242
1243                 edesc->pset[1].param.opt |= ITCCHEN;
1244                 edesc->pset[1].param.opt |= TCINTEN;
1245         }
1246
1247         return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
1248 }
1249
1250 static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
1251         struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
1252         size_t period_len, enum dma_transfer_direction direction,
1253         unsigned long tx_flags)
1254 {
1255         struct edma_chan *echan = to_edma_chan(chan);
1256         struct device *dev = chan->device->dev;
1257         struct edma_desc *edesc;
1258         dma_addr_t src_addr, dst_addr;
1259         enum dma_slave_buswidth dev_width;
1260         bool use_intermediate = false;
1261         u32 burst;
1262         int i, ret, nslots;
1263
1264         if (unlikely(!echan || !buf_len || !period_len))
1265                 return NULL;
1266
1267         if (direction == DMA_DEV_TO_MEM) {
1268                 src_addr = echan->cfg.src_addr;
1269                 dst_addr = buf_addr;
1270                 dev_width = echan->cfg.src_addr_width;
1271                 burst = echan->cfg.src_maxburst;
1272         } else if (direction == DMA_MEM_TO_DEV) {
1273                 src_addr = buf_addr;
1274                 dst_addr = echan->cfg.dst_addr;
1275                 dev_width = echan->cfg.dst_addr_width;
1276                 burst = echan->cfg.dst_maxburst;
1277         } else {
1278                 dev_err(dev, "%s: bad direction: %d\n", __func__, direction);
1279                 return NULL;
1280         }
1281
1282         if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
1283                 dev_err(dev, "%s: Undefined slave buswidth\n", __func__);
1284                 return NULL;
1285         }
1286
1287         if (unlikely(buf_len % period_len)) {
1288                 dev_err(dev, "Period should be multiple of Buffer length\n");
1289                 return NULL;
1290         }
1291
1292         nslots = (buf_len / period_len) + 1;
1293
1294         /*
1295          * Cyclic DMA users such as audio cannot tolerate delays introduced
1296          * by cases where the number of periods is more than the maximum
1297          * number of SGs the EDMA driver can handle at a time. For DMA types
1298          * such as Slave SGs, such delays are tolerable and synchronized,
1299          * but the synchronization is difficult to achieve with Cyclic and
1300          * cannot be guaranteed, so we error out early.
1301          */
1302         if (nslots > MAX_NR_SG) {
1303                 /*
1304                  * If the burst and period sizes are the same, we can put
1305                  * the full buffer into a single period and activate
1306                  * intermediate interrupts. This will produce interrupts
1307                  * after each burst, which is also after each desired period.
1308                  */
1309                 if (burst == period_len) {
1310                         period_len = buf_len;
1311                         nslots = 2;
1312                         use_intermediate = true;
1313                 } else {
1314                         return NULL;
1315                 }
1316         }
1317
1318         edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
1319                         GFP_ATOMIC);
1320         if (!edesc)
1321                 return NULL;
1322
1323         edesc->cyclic = 1;
1324         edesc->pset_nr = nslots;
1325         edesc->residue = edesc->residue_stat = buf_len;
1326         edesc->direction = direction;
1327         edesc->echan = echan;
1328
1329         dev_dbg(dev, "%s: channel=%d nslots=%d period_len=%zu buf_len=%zu\n",
1330                 __func__, echan->ch_num, nslots, period_len, buf_len);
1331
1332         for (i = 0; i < nslots; i++) {
1333                 /* Allocate a PaRAM slot, if needed */
1334                 if (echan->slot[i] < 0) {
1335                         echan->slot[i] =
1336                                 edma_alloc_slot(echan->ecc, EDMA_SLOT_ANY);
1337                         if (echan->slot[i] < 0) {
1338                                 kfree(edesc);
1339                                 dev_err(dev, "%s: Failed to allocate slot\n",
1340                                         __func__);
1341                                 return NULL;
1342                         }
1343                 }
1344
1345                 if (i == nslots - 1) {
1346                         memcpy(&edesc->pset[i], &edesc->pset[0],
1347                                sizeof(edesc->pset[0]));
1348                         break;
1349                 }
1350
1351                 ret = edma_config_pset(chan, &edesc->pset[i], src_addr,
1352                                        dst_addr, burst, dev_width, period_len,
1353                                        direction);
1354                 if (ret < 0) {
1355                         kfree(edesc);
1356                         return NULL;
1357                 }
1358
1359                 if (direction == DMA_DEV_TO_MEM)
1360                         dst_addr += period_len;
1361                 else
1362                         src_addr += period_len;
1363
1364                 dev_vdbg(dev, "%s: Configure period %d of buf:\n", __func__, i);
1365                 dev_vdbg(dev,
1366                         "\n pset[%d]:\n"
1367                         "  chnum\t%d\n"
1368                         "  slot\t%d\n"
1369                         "  opt\t%08x\n"
1370                         "  src\t%08x\n"
1371                         "  dst\t%08x\n"
1372                         "  abcnt\t%08x\n"
1373                         "  ccnt\t%08x\n"
1374                         "  bidx\t%08x\n"
1375                         "  cidx\t%08x\n"
1376                         "  lkrld\t%08x\n",
1377                         i, echan->ch_num, echan->slot[i],
1378                         edesc->pset[i].param.opt,
1379                         edesc->pset[i].param.src,
1380                         edesc->pset[i].param.dst,
1381                         edesc->pset[i].param.a_b_cnt,
1382                         edesc->pset[i].param.ccnt,
1383                         edesc->pset[i].param.src_dst_bidx,
1384                         edesc->pset[i].param.src_dst_cidx,
1385                         edesc->pset[i].param.link_bcntrld);
1386
1387                 edesc->absync = ret;
1388
1389                 /*
1390                  * Enable period interrupt only if it is requested
1391                  */
1392                 if (tx_flags & DMA_PREP_INTERRUPT) {
1393                         edesc->pset[i].param.opt |= TCINTEN;
1394
1395                         /* Also enable intermediate interrupts if necessary */
1396                         if (use_intermediate)
1397                                 edesc->pset[i].param.opt |= ITCINTEN;
1398                 }
1399         }
1400
1401         /* Place the cyclic channel to highest priority queue */
1402         if (!echan->tc)
1403                 edma_assign_channel_eventq(echan, EVENTQ_0);
1404
1405         return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
1406 }
1407
1408 static void edma_completion_handler(struct edma_chan *echan)
1409 {
1410         struct device *dev = echan->vchan.chan.device->dev;
1411         struct edma_desc *edesc;
1412
1413         spin_lock(&echan->vchan.lock);
1414         edesc = echan->edesc;
1415         if (edesc) {
1416                 if (edesc->cyclic) {
1417                         vchan_cyclic_callback(&edesc->vdesc);
1418                         spin_unlock(&echan->vchan.lock);
1419                         return;
1420                 } else if (edesc->processed == edesc->pset_nr) {
1421                         edesc->residue = 0;
1422                         edma_stop(echan);
1423                         vchan_cookie_complete(&edesc->vdesc);
1424                         echan->edesc = NULL;
1425
1426                         dev_dbg(dev, "Transfer completed on channel %d\n",
1427                                 echan->ch_num);
1428                 } else {
1429                         dev_dbg(dev, "Sub transfer completed on channel %d\n",
1430                                 echan->ch_num);
1431
1432                         edma_pause(echan);
1433
1434                         /* Update statistics for tx_status */
1435                         edesc->residue -= edesc->sg_len;
1436                         edesc->residue_stat = edesc->residue;
1437                         edesc->processed_stat = edesc->processed;
1438                 }
1439                 edma_execute(echan);
1440         }
1441
1442         spin_unlock(&echan->vchan.lock);
1443 }
1444
1445 /* eDMA interrupt handler */
1446 static irqreturn_t dma_irq_handler(int irq, void *data)
1447 {
1448         struct edma_cc *ecc = data;
1449         int ctlr;
1450         u32 sh_ier;
1451         u32 sh_ipr;
1452         u32 bank;
1453
1454         ctlr = ecc->id;
1455         if (ctlr < 0)
1456                 return IRQ_NONE;
1457
1458         dev_vdbg(ecc->dev, "dma_irq_handler\n");
1459
1460         sh_ipr = edma_shadow0_read_array(ecc, SH_IPR, 0);
1461         if (!sh_ipr) {
1462                 sh_ipr = edma_shadow0_read_array(ecc, SH_IPR, 1);
1463                 if (!sh_ipr)
1464                         return IRQ_NONE;
1465                 sh_ier = edma_shadow0_read_array(ecc, SH_IER, 1);
1466                 bank = 1;
1467         } else {
1468                 sh_ier = edma_shadow0_read_array(ecc, SH_IER, 0);
1469                 bank = 0;
1470         }
1471
1472         do {
1473                 u32 slot;
1474                 u32 channel;
1475
1476                 slot = __ffs(sh_ipr);
1477                 sh_ipr &= ~(BIT(slot));
1478
1479                 if (sh_ier & BIT(slot)) {
1480                         channel = (bank << 5) | slot;
1481                         /* Clear the corresponding IPR bits */
1482                         edma_shadow0_write_array(ecc, SH_ICR, bank, BIT(slot));
1483                         edma_completion_handler(&ecc->slave_chans[channel]);
1484                 }
1485         } while (sh_ipr);
1486
1487         edma_shadow0_write(ecc, SH_IEVAL, 1);
1488         return IRQ_HANDLED;
1489 }
1490
1491 static void edma_error_handler(struct edma_chan *echan)
1492 {
1493         struct edma_cc *ecc = echan->ecc;
1494         struct device *dev = echan->vchan.chan.device->dev;
1495         struct edmacc_param p;
1496         int err;
1497
1498         if (!echan->edesc)
1499                 return;
1500
1501         spin_lock(&echan->vchan.lock);
1502
1503         err = edma_read_slot(ecc, echan->slot[0], &p);
1504
1505         /*
1506          * Issue later based on missed flag which will be sure
1507          * to happen as:
1508          * (1) we finished transmitting an intermediate slot and
1509          *     edma_execute is coming up.
1510          * (2) or we finished current transfer and issue will
1511          *     call edma_execute.
1512          *
1513          * Important note: issuing can be dangerous here and
1514          * lead to some nasty recursion when we are in a NULL
1515          * slot. So we avoid doing so and set the missed flag.
1516          */
1517         if (err || (p.a_b_cnt == 0 && p.ccnt == 0)) {
1518                 dev_dbg(dev, "Error on null slot, setting miss\n");
1519                 echan->missed = 1;
1520         } else {
1521                 /*
1522                  * The slot is already programmed but the event got
1523                  * missed, so its safe to issue it here.
1524                  */
1525                 dev_dbg(dev, "Missed event, TRIGGERING\n");
1526                 edma_clean_channel(echan);
1527                 edma_stop(echan);
1528                 edma_start(echan);
1529                 edma_trigger_channel(echan);
1530         }
1531         spin_unlock(&echan->vchan.lock);
1532 }
1533
1534 static inline bool edma_error_pending(struct edma_cc *ecc)
1535 {
1536         if (edma_read_array(ecc, EDMA_EMR, 0) ||
1537             edma_read_array(ecc, EDMA_EMR, 1) ||
1538             edma_read(ecc, EDMA_QEMR) || edma_read(ecc, EDMA_CCERR))
1539                 return true;
1540
1541         return false;
1542 }
1543
1544 /* eDMA error interrupt handler */
1545 static irqreturn_t dma_ccerr_handler(int irq, void *data)
1546 {
1547         struct edma_cc *ecc = data;
1548         int i, j;
1549         int ctlr;
1550         unsigned int cnt = 0;
1551         unsigned int val;
1552
1553         ctlr = ecc->id;
1554         if (ctlr < 0)
1555                 return IRQ_NONE;
1556
1557         dev_vdbg(ecc->dev, "dma_ccerr_handler\n");
1558
1559         if (!edma_error_pending(ecc)) {
1560                 /*
1561                  * The registers indicate no pending error event but the irq
1562                  * handler has been called.
1563                  * Ask eDMA to re-evaluate the error registers.
1564                  */
1565                 dev_err(ecc->dev, "%s: Error interrupt without error event!\n",
1566                         __func__);
1567                 edma_write(ecc, EDMA_EEVAL, 1);
1568                 return IRQ_NONE;
1569         }
1570
1571         while (1) {
1572                 /* Event missed register(s) */
1573                 for (j = 0; j < 2; j++) {
1574                         unsigned long emr;
1575
1576                         val = edma_read_array(ecc, EDMA_EMR, j);
1577                         if (!val)
1578                                 continue;
1579
1580                         dev_dbg(ecc->dev, "EMR%d 0x%08x\n", j, val);
1581                         emr = val;
1582                         for (i = find_next_bit(&emr, 32, 0); i < 32;
1583                              i = find_next_bit(&emr, 32, i + 1)) {
1584                                 int k = (j << 5) + i;
1585
1586                                 /* Clear the corresponding EMR bits */
1587                                 edma_write_array(ecc, EDMA_EMCR, j, BIT(i));
1588                                 /* Clear any SER */
1589                                 edma_shadow0_write_array(ecc, SH_SECR, j,
1590                                                          BIT(i));
1591                                 edma_error_handler(&ecc->slave_chans[k]);
1592                         }
1593                 }
1594
1595                 val = edma_read(ecc, EDMA_QEMR);
1596                 if (val) {
1597                         dev_dbg(ecc->dev, "QEMR 0x%02x\n", val);
1598                         /* Not reported, just clear the interrupt reason. */
1599                         edma_write(ecc, EDMA_QEMCR, val);
1600                         edma_shadow0_write(ecc, SH_QSECR, val);
1601                 }
1602
1603                 val = edma_read(ecc, EDMA_CCERR);
1604                 if (val) {
1605                         dev_warn(ecc->dev, "CCERR 0x%08x\n", val);
1606                         /* Not reported, just clear the interrupt reason. */
1607                         edma_write(ecc, EDMA_CCERRCLR, val);
1608                 }
1609
1610                 if (!edma_error_pending(ecc))
1611                         break;
1612                 cnt++;
1613                 if (cnt > 10)
1614                         break;
1615         }
1616         edma_write(ecc, EDMA_EEVAL, 1);
1617         return IRQ_HANDLED;
1618 }
1619
1620 /* Alloc channel resources */
1621 static int edma_alloc_chan_resources(struct dma_chan *chan)
1622 {
1623         struct edma_chan *echan = to_edma_chan(chan);
1624         struct edma_cc *ecc = echan->ecc;
1625         struct device *dev = ecc->dev;
1626         enum dma_event_q eventq_no = EVENTQ_DEFAULT;
1627         int ret;
1628
1629         if (echan->tc) {
1630                 eventq_no = echan->tc->id;
1631         } else if (ecc->tc_list) {
1632                 /* memcpy channel */
1633                 echan->tc = &ecc->tc_list[ecc->info->default_queue];
1634                 eventq_no = echan->tc->id;
1635         }
1636
1637         ret = edma_alloc_channel(echan, eventq_no);
1638         if (ret)
1639                 return ret;
1640
1641         echan->slot[0] = edma_alloc_slot(ecc, echan->ch_num);
1642         if (echan->slot[0] < 0) {
1643                 dev_err(dev, "Entry slot allocation failed for channel %u\n",
1644                         EDMA_CHAN_SLOT(echan->ch_num));
1645                 ret = echan->slot[0];
1646                 goto err_slot;
1647         }
1648
1649         /* Set up channel -> slot mapping for the entry slot */
1650         edma_set_chmap(echan, echan->slot[0]);
1651         echan->alloced = true;
1652
1653         dev_dbg(dev, "Got eDMA channel %d for virt channel %d (%s trigger)\n",
1654                 EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
1655                 echan->hw_triggered ? "HW" : "SW");
1656
1657         return 0;
1658
1659 err_slot:
1660         edma_free_channel(echan);
1661         return ret;
1662 }
1663
1664 /* Free channel resources */
1665 static void edma_free_chan_resources(struct dma_chan *chan)
1666 {
1667         struct edma_chan *echan = to_edma_chan(chan);
1668         struct device *dev = echan->ecc->dev;
1669         int i;
1670
1671         /* Terminate transfers */
1672         edma_stop(echan);
1673
1674         vchan_free_chan_resources(&echan->vchan);
1675
1676         /* Free EDMA PaRAM slots */
1677         for (i = 0; i < EDMA_MAX_SLOTS; i++) {
1678                 if (echan->slot[i] >= 0) {
1679                         edma_free_slot(echan->ecc, echan->slot[i]);
1680                         echan->slot[i] = -1;
1681                 }
1682         }
1683
1684         /* Set entry slot to the dummy slot */
1685         edma_set_chmap(echan, echan->ecc->dummy_slot);
1686
1687         /* Free EDMA channel */
1688         if (echan->alloced) {
1689                 edma_free_channel(echan);
1690                 echan->alloced = false;
1691         }
1692
1693         echan->tc = NULL;
1694         echan->hw_triggered = false;
1695
1696         dev_dbg(dev, "Free eDMA channel %d for virt channel %d\n",
1697                 EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id);
1698 }
1699
1700 /* Send pending descriptor to hardware */
1701 static void edma_issue_pending(struct dma_chan *chan)
1702 {
1703         struct edma_chan *echan = to_edma_chan(chan);
1704         unsigned long flags;
1705
1706         spin_lock_irqsave(&echan->vchan.lock, flags);
1707         if (vchan_issue_pending(&echan->vchan) && !echan->edesc)
1708                 edma_execute(echan);
1709         spin_unlock_irqrestore(&echan->vchan.lock, flags);
1710 }
1711
1712 /*
1713  * This limit exists to avoid a possible infinite loop when waiting for proof
1714  * that a particular transfer is completed. This limit can be hit if there
1715  * are large bursts to/from slow devices or the CPU is never able to catch
1716  * the DMA hardware idle. On an AM335x transfering 48 bytes from the UART
1717  * RX-FIFO, as many as 55 loops have been seen.
1718  */
1719 #define EDMA_MAX_TR_WAIT_LOOPS 1000
1720
1721 static u32 edma_residue(struct edma_desc *edesc)
1722 {
1723         bool dst = edesc->direction == DMA_DEV_TO_MEM;
1724         int loop_count = EDMA_MAX_TR_WAIT_LOOPS;
1725         struct edma_chan *echan = edesc->echan;
1726         struct edma_pset *pset = edesc->pset;
1727         dma_addr_t done, pos;
1728         int i;
1729
1730         /*
1731          * We always read the dst/src position from the first RamPar
1732          * pset. That's the one which is active now.
1733          */
1734         pos = edma_get_position(echan->ecc, echan->slot[0], dst);
1735
1736         /*
1737          * "pos" may represent a transfer request that is still being
1738          * processed by the EDMACC or EDMATC. We will busy wait until
1739          * any one of the situations occurs:
1740          *   1. the DMA hardware is idle
1741          *   2. a new transfer request is setup
1742          *   3. we hit the loop limit
1743          */
1744         while (edma_read(echan->ecc, EDMA_CCSTAT) & EDMA_CCSTAT_ACTV) {
1745                 /* check if a new transfer request is setup */
1746                 if (edma_get_position(echan->ecc,
1747                                       echan->slot[0], dst) != pos) {
1748                         break;
1749                 }
1750
1751                 if (!--loop_count) {
1752                         dev_dbg_ratelimited(echan->vchan.chan.device->dev,
1753                                 "%s: timeout waiting for PaRAM update\n",
1754                                 __func__);
1755                         break;
1756                 }
1757
1758                 cpu_relax();
1759         }
1760
1761         /*
1762          * Cyclic is simple. Just subtract pset[0].addr from pos.
1763          *
1764          * We never update edesc->residue in the cyclic case, so we
1765          * can tell the remaining room to the end of the circular
1766          * buffer.
1767          */
1768         if (edesc->cyclic) {
1769                 done = pos - pset->addr;
1770                 edesc->residue_stat = edesc->residue - done;
1771                 return edesc->residue_stat;
1772         }
1773
1774         /*
1775          * For SG operation we catch up with the last processed
1776          * status.
1777          */
1778         pset += edesc->processed_stat;
1779
1780         for (i = edesc->processed_stat; i < edesc->processed; i++, pset++) {
1781                 /*
1782                  * If we are inside this pset address range, we know
1783                  * this is the active one. Get the current delta and
1784                  * stop walking the psets.
1785                  */
1786                 if (pos >= pset->addr && pos < pset->addr + pset->len)
1787                         return edesc->residue_stat - (pos - pset->addr);
1788
1789                 /* Otherwise mark it done and update residue_stat. */
1790                 edesc->processed_stat++;
1791                 edesc->residue_stat -= pset->len;
1792         }
1793         return edesc->residue_stat;
1794 }
1795
1796 /* Check request completion status */
1797 static enum dma_status edma_tx_status(struct dma_chan *chan,
1798                                       dma_cookie_t cookie,
1799                                       struct dma_tx_state *txstate)
1800 {
1801         struct edma_chan *echan = to_edma_chan(chan);
1802         struct virt_dma_desc *vdesc;
1803         enum dma_status ret;
1804         unsigned long flags;
1805
1806         ret = dma_cookie_status(chan, cookie, txstate);
1807         if (ret == DMA_COMPLETE || !txstate)
1808                 return ret;
1809
1810         spin_lock_irqsave(&echan->vchan.lock, flags);
1811         if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie)
1812                 txstate->residue = edma_residue(echan->edesc);
1813         else if ((vdesc = vchan_find_desc(&echan->vchan, cookie)))
1814                 txstate->residue = to_edma_desc(&vdesc->tx)->residue;
1815         spin_unlock_irqrestore(&echan->vchan.lock, flags);
1816
1817         return ret;
1818 }
1819
1820 static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
1821 {
1822         if (!memcpy_channels)
1823                 return false;
1824         while (*memcpy_channels != -1) {
1825                 if (*memcpy_channels == ch_num)
1826                         return true;
1827                 memcpy_channels++;
1828         }
1829         return false;
1830 }
1831
1832 #define EDMA_DMA_BUSWIDTHS      (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
1833                                  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
1834                                  BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
1835                                  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
1836
1837 static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
1838 {
1839         struct dma_device *s_ddev = &ecc->dma_slave;
1840         struct dma_device *m_ddev = NULL;
1841         s32 *memcpy_channels = ecc->info->memcpy_channels;
1842         int i, j;
1843
1844         dma_cap_zero(s_ddev->cap_mask);
1845         dma_cap_set(DMA_SLAVE, s_ddev->cap_mask);
1846         dma_cap_set(DMA_CYCLIC, s_ddev->cap_mask);
1847         if (ecc->legacy_mode && !memcpy_channels) {
1848                 dev_warn(ecc->dev,
1849                          "Legacy memcpy is enabled, things might not work\n");
1850
1851                 dma_cap_set(DMA_MEMCPY, s_ddev->cap_mask);
1852                 s_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
1853                 s_ddev->directions = BIT(DMA_MEM_TO_MEM);
1854         }
1855
1856         s_ddev->device_prep_slave_sg = edma_prep_slave_sg;
1857         s_ddev->device_prep_dma_cyclic = edma_prep_dma_cyclic;
1858         s_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
1859         s_ddev->device_free_chan_resources = edma_free_chan_resources;
1860         s_ddev->device_issue_pending = edma_issue_pending;
1861         s_ddev->device_tx_status = edma_tx_status;
1862         s_ddev->device_config = edma_slave_config;
1863         s_ddev->device_pause = edma_dma_pause;
1864         s_ddev->device_resume = edma_dma_resume;
1865         s_ddev->device_terminate_all = edma_terminate_all;
1866         s_ddev->device_synchronize = edma_synchronize;
1867
1868         s_ddev->src_addr_widths = EDMA_DMA_BUSWIDTHS;
1869         s_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
1870         s_ddev->directions |= (BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV));
1871         s_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
1872         s_ddev->max_burst = SZ_32K - 1; /* CIDX: 16bit signed */
1873
1874         s_ddev->dev = ecc->dev;
1875         INIT_LIST_HEAD(&s_ddev->channels);
1876
1877         if (memcpy_channels) {
1878                 m_ddev = devm_kzalloc(ecc->dev, sizeof(*m_ddev), GFP_KERNEL);
1879                 ecc->dma_memcpy = m_ddev;
1880
1881                 dma_cap_zero(m_ddev->cap_mask);
1882                 dma_cap_set(DMA_MEMCPY, m_ddev->cap_mask);
1883
1884                 m_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
1885                 m_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
1886                 m_ddev->device_free_chan_resources = edma_free_chan_resources;
1887                 m_ddev->device_issue_pending = edma_issue_pending;
1888                 m_ddev->device_tx_status = edma_tx_status;
1889                 m_ddev->device_config = edma_slave_config;
1890                 m_ddev->device_pause = edma_dma_pause;
1891                 m_ddev->device_resume = edma_dma_resume;
1892                 m_ddev->device_terminate_all = edma_terminate_all;
1893                 m_ddev->device_synchronize = edma_synchronize;
1894
1895                 m_ddev->src_addr_widths = EDMA_DMA_BUSWIDTHS;
1896                 m_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
1897                 m_ddev->directions = BIT(DMA_MEM_TO_MEM);
1898                 m_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
1899
1900                 m_ddev->dev = ecc->dev;
1901                 INIT_LIST_HEAD(&m_ddev->channels);
1902         } else if (!ecc->legacy_mode) {
1903                 dev_info(ecc->dev, "memcpy is disabled\n");
1904         }
1905
1906         for (i = 0; i < ecc->num_channels; i++) {
1907                 struct edma_chan *echan = &ecc->slave_chans[i];
1908                 echan->ch_num = EDMA_CTLR_CHAN(ecc->id, i);
1909                 echan->ecc = ecc;
1910                 echan->vchan.desc_free = edma_desc_free;
1911
1912                 if (m_ddev && edma_is_memcpy_channel(i, memcpy_channels))
1913                         vchan_init(&echan->vchan, m_ddev);
1914                 else
1915                         vchan_init(&echan->vchan, s_ddev);
1916
1917                 INIT_LIST_HEAD(&echan->node);
1918                 for (j = 0; j < EDMA_MAX_SLOTS; j++)
1919                         echan->slot[j] = -1;
1920         }
1921 }
1922
1923 static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
1924                               struct edma_cc *ecc)
1925 {
1926         int i;
1927         u32 value, cccfg;
1928         s8 (*queue_priority_map)[2];
1929
1930         /* Decode the eDMA3 configuration from CCCFG register */
1931         cccfg = edma_read(ecc, EDMA_CCCFG);
1932
1933         value = GET_NUM_REGN(cccfg);
1934         ecc->num_region = BIT(value);
1935
1936         value = GET_NUM_DMACH(cccfg);
1937         ecc->num_channels = BIT(value + 1);
1938
1939         value = GET_NUM_QDMACH(cccfg);
1940         ecc->num_qchannels = value * 2;
1941
1942         value = GET_NUM_PAENTRY(cccfg);
1943         ecc->num_slots = BIT(value + 4);
1944
1945         value = GET_NUM_EVQUE(cccfg);
1946         ecc->num_tc = value + 1;
1947
1948         ecc->chmap_exist = (cccfg & CHMAP_EXIST) ? true : false;
1949
1950         dev_dbg(dev, "eDMA3 CC HW configuration (cccfg: 0x%08x):\n", cccfg);
1951         dev_dbg(dev, "num_region: %u\n", ecc->num_region);
1952         dev_dbg(dev, "num_channels: %u\n", ecc->num_channels);
1953         dev_dbg(dev, "num_qchannels: %u\n", ecc->num_qchannels);
1954         dev_dbg(dev, "num_slots: %u\n", ecc->num_slots);
1955         dev_dbg(dev, "num_tc: %u\n", ecc->num_tc);
1956         dev_dbg(dev, "chmap_exist: %s\n", ecc->chmap_exist ? "yes" : "no");
1957
1958         /* Nothing need to be done if queue priority is provided */
1959         if (pdata->queue_priority_mapping)
1960                 return 0;
1961
1962         /*
1963          * Configure TC/queue priority as follows:
1964          * Q0 - priority 0
1965          * Q1 - priority 1
1966          * Q2 - priority 2
1967          * ...
1968          * The meaning of priority numbers: 0 highest priority, 7 lowest
1969          * priority. So Q0 is the highest priority queue and the last queue has
1970          * the lowest priority.
1971          */
1972         queue_priority_map = devm_kcalloc(dev, ecc->num_tc + 1, sizeof(s8),
1973                                           GFP_KERNEL);
1974         if (!queue_priority_map)
1975                 return -ENOMEM;
1976
1977         for (i = 0; i < ecc->num_tc; i++) {
1978                 queue_priority_map[i][0] = i;
1979                 queue_priority_map[i][1] = i;
1980         }
1981         queue_priority_map[i][0] = -1;
1982         queue_priority_map[i][1] = -1;
1983
1984         pdata->queue_priority_mapping = queue_priority_map;
1985         /* Default queue has the lowest priority */
1986         pdata->default_queue = i - 1;
1987
1988         return 0;
1989 }
1990
1991 #if IS_ENABLED(CONFIG_OF)
1992 static int edma_xbar_event_map(struct device *dev, struct edma_soc_info *pdata,
1993                                size_t sz)
1994 {
1995         const char pname[] = "ti,edma-xbar-event-map";
1996         struct resource res;
1997         void __iomem *xbar;
1998         s16 (*xbar_chans)[2];
1999         size_t nelm = sz / sizeof(s16);
2000         u32 shift, offset, mux;
2001         int ret, i;
2002
2003         xbar_chans = devm_kcalloc(dev, nelm + 2, sizeof(s16), GFP_KERNEL);
2004         if (!xbar_chans)
2005                 return -ENOMEM;
2006
2007         ret = of_address_to_resource(dev->of_node, 1, &res);
2008         if (ret)
2009                 return -ENOMEM;
2010
2011         xbar = devm_ioremap(dev, res.start, resource_size(&res));
2012         if (!xbar)
2013                 return -ENOMEM;
2014
2015         ret = of_property_read_u16_array(dev->of_node, pname, (u16 *)xbar_chans,
2016                                          nelm);
2017         if (ret)
2018                 return -EIO;
2019
2020         /* Invalidate last entry for the other user of this mess */
2021         nelm >>= 1;
2022         xbar_chans[nelm][0] = -1;
2023         xbar_chans[nelm][1] = -1;
2024
2025         for (i = 0; i < nelm; i++) {
2026                 shift = (xbar_chans[i][1] & 0x03) << 3;
2027                 offset = xbar_chans[i][1] & 0xfffffffc;
2028                 mux = readl(xbar + offset);
2029                 mux &= ~(0xff << shift);
2030                 mux |= xbar_chans[i][0] << shift;
2031                 writel(mux, (xbar + offset));
2032         }
2033
2034         pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
2035         return 0;
2036 }
2037
2038 static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
2039                                                      bool legacy_mode)
2040 {
2041         struct edma_soc_info *info;
2042         struct property *prop;
2043         int sz, ret;
2044
2045         info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
2046         if (!info)
2047                 return ERR_PTR(-ENOMEM);
2048
2049         if (legacy_mode) {
2050                 prop = of_find_property(dev->of_node, "ti,edma-xbar-event-map",
2051                                         &sz);
2052                 if (prop) {
2053                         ret = edma_xbar_event_map(dev, info, sz);
2054                         if (ret)
2055                                 return ERR_PTR(ret);
2056                 }
2057                 return info;
2058         }
2059
2060         /* Get the list of channels allocated to be used for memcpy */
2061         prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
2062         if (prop) {
2063                 const char pname[] = "ti,edma-memcpy-channels";
2064                 size_t nelm = sz / sizeof(s32);
2065                 s32 *memcpy_ch;
2066
2067                 memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
2068                                          GFP_KERNEL);
2069                 if (!memcpy_ch)
2070                         return ERR_PTR(-ENOMEM);
2071
2072                 ret = of_property_read_u32_array(dev->of_node, pname,
2073                                                  (u32 *)memcpy_ch, nelm);
2074                 if (ret)
2075                         return ERR_PTR(ret);
2076
2077                 memcpy_ch[nelm] = -1;
2078                 info->memcpy_channels = memcpy_ch;
2079         }
2080
2081         prop = of_find_property(dev->of_node, "ti,edma-reserved-slot-ranges",
2082                                 &sz);
2083         if (prop) {
2084                 const char pname[] = "ti,edma-reserved-slot-ranges";
2085                 u32 (*tmp)[2];
2086                 s16 (*rsv_slots)[2];
2087                 size_t nelm = sz / sizeof(*tmp);
2088                 struct edma_rsv_info *rsv_info;
2089                 int i;
2090
2091                 if (!nelm)
2092                         return info;
2093
2094                 tmp = kcalloc(nelm, sizeof(*tmp), GFP_KERNEL);
2095                 if (!tmp)
2096                         return ERR_PTR(-ENOMEM);
2097
2098                 rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
2099                 if (!rsv_info) {
2100                         kfree(tmp);
2101                         return ERR_PTR(-ENOMEM);
2102                 }
2103
2104                 rsv_slots = devm_kcalloc(dev, nelm + 1, sizeof(*rsv_slots),
2105                                          GFP_KERNEL);
2106                 if (!rsv_slots) {
2107                         kfree(tmp);
2108                         return ERR_PTR(-ENOMEM);
2109                 }
2110
2111                 ret = of_property_read_u32_array(dev->of_node, pname,
2112                                                  (u32 *)tmp, nelm * 2);
2113                 if (ret) {
2114                         kfree(tmp);
2115                         return ERR_PTR(ret);
2116                 }
2117
2118                 for (i = 0; i < nelm; i++) {
2119                         rsv_slots[i][0] = tmp[i][0];
2120                         rsv_slots[i][1] = tmp[i][1];
2121                 }
2122                 rsv_slots[nelm][0] = -1;
2123                 rsv_slots[nelm][1] = -1;
2124
2125                 info->rsv = rsv_info;
2126                 info->rsv->rsv_slots = (const s16 (*)[2])rsv_slots;
2127
2128                 kfree(tmp);
2129         }
2130
2131         return info;
2132 }
2133
2134 static struct dma_chan *of_edma_xlate(struct of_phandle_args *dma_spec,
2135                                       struct of_dma *ofdma)
2136 {
2137         struct edma_cc *ecc = ofdma->of_dma_data;
2138         struct dma_chan *chan = NULL;
2139         struct edma_chan *echan;
2140         int i;
2141
2142         if (!ecc || dma_spec->args_count < 1)
2143                 return NULL;
2144
2145         for (i = 0; i < ecc->num_channels; i++) {
2146                 echan = &ecc->slave_chans[i];
2147                 if (echan->ch_num == dma_spec->args[0]) {
2148                         chan = &echan->vchan.chan;
2149                         break;
2150                 }
2151         }
2152
2153         if (!chan)
2154                 return NULL;
2155
2156         if (echan->ecc->legacy_mode && dma_spec->args_count == 1)
2157                 goto out;
2158
2159         if (!echan->ecc->legacy_mode && dma_spec->args_count == 2 &&
2160             dma_spec->args[1] < echan->ecc->num_tc) {
2161                 echan->tc = &echan->ecc->tc_list[dma_spec->args[1]];
2162                 goto out;
2163         }
2164
2165         return NULL;
2166 out:
2167         /* The channel is going to be used as HW synchronized */
2168         echan->hw_triggered = true;
2169         return dma_get_slave_channel(chan);
2170 }
2171 #else
2172 static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
2173                                                      bool legacy_mode)
2174 {
2175         return ERR_PTR(-EINVAL);
2176 }
2177
2178 static struct dma_chan *of_edma_xlate(struct of_phandle_args *dma_spec,
2179                                       struct of_dma *ofdma)
2180 {
2181         return NULL;
2182 }
2183 #endif
2184
2185 static int edma_probe(struct platform_device *pdev)
2186 {
2187         struct edma_soc_info    *info = pdev->dev.platform_data;
2188         s8                      (*queue_priority_mapping)[2];
2189         int                     i, off, ln;
2190         const s16               (*rsv_slots)[2];
2191         const s16               (*xbar_chans)[2];
2192         int                     irq;
2193         char                    *irq_name;
2194         struct resource         *mem;
2195         struct device_node      *node = pdev->dev.of_node;
2196         struct device           *dev = &pdev->dev;
2197         struct edma_cc          *ecc;
2198         bool                    legacy_mode = true;
2199         int ret;
2200
2201         if (node) {
2202                 const struct of_device_id *match;
2203
2204                 match = of_match_node(edma_of_ids, node);
2205                 if (match && (*(u32 *)match->data) == EDMA_BINDING_TPCC)
2206                         legacy_mode = false;
2207
2208                 info = edma_setup_info_from_dt(dev, legacy_mode);
2209                 if (IS_ERR(info)) {
2210                         dev_err(dev, "failed to get DT data\n");
2211                         return PTR_ERR(info);
2212                 }
2213         }
2214
2215         if (!info)
2216                 return -ENODEV;
2217
2218         pm_runtime_enable(dev);
2219         ret = pm_runtime_get_sync(dev);
2220         if (ret < 0) {
2221                 dev_err(dev, "pm_runtime_get_sync() failed\n");
2222                 return ret;
2223         }
2224
2225         ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
2226         if (ret)
2227                 return ret;
2228
2229         ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
2230         if (!ecc)
2231                 return -ENOMEM;
2232
2233         ecc->dev = dev;
2234         ecc->id = pdev->id;
2235         ecc->legacy_mode = legacy_mode;
2236         /* When booting with DT the pdev->id is -1 */
2237         if (ecc->id < 0)
2238                 ecc->id = 0;
2239
2240         mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma3_cc");
2241         if (!mem) {
2242                 dev_dbg(dev, "mem resource not found, using index 0\n");
2243                 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2244                 if (!mem) {
2245                         dev_err(dev, "no mem resource?\n");
2246                         return -ENODEV;
2247                 }
2248         }
2249         ecc->base = devm_ioremap_resource(dev, mem);
2250         if (IS_ERR(ecc->base))
2251                 return PTR_ERR(ecc->base);
2252
2253         platform_set_drvdata(pdev, ecc);
2254
2255         /* Get eDMA3 configuration from IP */
2256         ret = edma_setup_from_hw(dev, info, ecc);
2257         if (ret)
2258                 return ret;
2259
2260         /* Allocate memory based on the information we got from the IP */
2261         ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
2262                                         sizeof(*ecc->slave_chans), GFP_KERNEL);
2263         if (!ecc->slave_chans)
2264                 return -ENOMEM;
2265
2266         ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
2267                                        sizeof(unsigned long), GFP_KERNEL);
2268         if (!ecc->slot_inuse)
2269                 return -ENOMEM;
2270
2271         ecc->default_queue = info->default_queue;
2272
2273         for (i = 0; i < ecc->num_slots; i++)
2274                 edma_write_slot(ecc, i, &dummy_paramset);
2275
2276         if (info->rsv) {
2277                 /* Set the reserved slots in inuse list */
2278                 rsv_slots = info->rsv->rsv_slots;
2279                 if (rsv_slots) {
2280                         for (i = 0; rsv_slots[i][0] != -1; i++) {
2281                                 off = rsv_slots[i][0];
2282                                 ln = rsv_slots[i][1];
2283                                 edma_set_bits(off, ln, ecc->slot_inuse);
2284                         }
2285                 }
2286         }
2287
2288         /* Clear the xbar mapped channels in unused list */
2289         xbar_chans = info->xbar_chans;
2290         if (xbar_chans) {
2291                 for (i = 0; xbar_chans[i][1] != -1; i++) {
2292                         off = xbar_chans[i][1];
2293                 }
2294         }
2295
2296         irq = platform_get_irq_byname(pdev, "edma3_ccint");
2297         if (irq < 0 && node)
2298                 irq = irq_of_parse_and_map(node, 0);
2299
2300         if (irq >= 0) {
2301                 irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
2302                                           dev_name(dev));
2303                 ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
2304                                        ecc);
2305                 if (ret) {
2306                         dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
2307                         return ret;
2308                 }
2309                 ecc->ccint = irq;
2310         }
2311
2312         irq = platform_get_irq_byname(pdev, "edma3_ccerrint");
2313         if (irq < 0 && node)
2314                 irq = irq_of_parse_and_map(node, 2);
2315
2316         if (irq >= 0) {
2317                 irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
2318                                           dev_name(dev));
2319                 ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
2320                                        ecc);
2321                 if (ret) {
2322                         dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
2323                         return ret;
2324                 }
2325                 ecc->ccerrint = irq;
2326         }
2327
2328         ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
2329         if (ecc->dummy_slot < 0) {
2330                 dev_err(dev, "Can't allocate PaRAM dummy slot\n");
2331                 return ecc->dummy_slot;
2332         }
2333
2334         queue_priority_mapping = info->queue_priority_mapping;
2335
2336         if (!ecc->legacy_mode) {
2337                 int lowest_priority = 0;
2338                 struct of_phandle_args tc_args;
2339
2340                 ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
2341                                             sizeof(*ecc->tc_list), GFP_KERNEL);
2342                 if (!ecc->tc_list)
2343                         return -ENOMEM;
2344
2345                 for (i = 0;; i++) {
2346                         ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
2347                                                                1, i, &tc_args);
2348                         if (ret || i == ecc->num_tc)
2349                                 break;
2350
2351                         ecc->tc_list[i].node = tc_args.np;
2352                         ecc->tc_list[i].id = i;
2353                         queue_priority_mapping[i][1] = tc_args.args[0];
2354                         if (queue_priority_mapping[i][1] > lowest_priority) {
2355                                 lowest_priority = queue_priority_mapping[i][1];
2356                                 info->default_queue = i;
2357                         }
2358                 }
2359         }
2360
2361         /* Event queue priority mapping */
2362         for (i = 0; queue_priority_mapping[i][0] != -1; i++)
2363                 edma_assign_priority_to_queue(ecc, queue_priority_mapping[i][0],
2364                                               queue_priority_mapping[i][1]);
2365
2366         for (i = 0; i < ecc->num_region; i++) {
2367                 edma_write_array2(ecc, EDMA_DRAE, i, 0, 0x0);
2368                 edma_write_array2(ecc, EDMA_DRAE, i, 1, 0x0);
2369                 edma_write_array(ecc, EDMA_QRAE, i, 0x0);
2370         }
2371         ecc->info = info;
2372
2373         /* Init the dma device and channels */
2374         edma_dma_init(ecc, legacy_mode);
2375
2376         for (i = 0; i < ecc->num_channels; i++) {
2377                 /* Assign all channels to the default queue */
2378                 edma_assign_channel_eventq(&ecc->slave_chans[i],
2379                                            info->default_queue);
2380                 /* Set entry slot to the dummy slot */
2381                 edma_set_chmap(&ecc->slave_chans[i], ecc->dummy_slot);
2382         }
2383
2384         ecc->dma_slave.filter.map = info->slave_map;
2385         ecc->dma_slave.filter.mapcnt = info->slavecnt;
2386         ecc->dma_slave.filter.fn = edma_filter_fn;
2387
2388         ret = dma_async_device_register(&ecc->dma_slave);
2389         if (ret) {
2390                 dev_err(dev, "slave ddev registration failed (%d)\n", ret);
2391                 goto err_reg1;
2392         }
2393
2394         if (ecc->dma_memcpy) {
2395                 ret = dma_async_device_register(ecc->dma_memcpy);
2396                 if (ret) {
2397                         dev_err(dev, "memcpy ddev registration failed (%d)\n",
2398                                 ret);
2399                         dma_async_device_unregister(&ecc->dma_slave);
2400                         goto err_reg1;
2401                 }
2402         }
2403
2404         if (node)
2405                 of_dma_controller_register(node, of_edma_xlate, ecc);
2406
2407         dev_info(dev, "TI EDMA DMA engine driver\n");
2408
2409         return 0;
2410
2411 err_reg1:
2412         edma_free_slot(ecc, ecc->dummy_slot);
2413         return ret;
2414 }
2415
2416 static void edma_cleanupp_vchan(struct dma_device *dmadev)
2417 {
2418         struct edma_chan *echan, *_echan;
2419
2420         list_for_each_entry_safe(echan, _echan,
2421                         &dmadev->channels, vchan.chan.device_node) {
2422                 list_del(&echan->vchan.chan.device_node);
2423                 tasklet_kill(&echan->vchan.task);
2424         }
2425 }
2426
2427 static int edma_remove(struct platform_device *pdev)
2428 {
2429         struct device *dev = &pdev->dev;
2430         struct edma_cc *ecc = dev_get_drvdata(dev);
2431
2432         devm_free_irq(dev, ecc->ccint, ecc);
2433         devm_free_irq(dev, ecc->ccerrint, ecc);
2434
2435         edma_cleanupp_vchan(&ecc->dma_slave);
2436
2437         if (dev->of_node)
2438                 of_dma_controller_free(dev->of_node);
2439         dma_async_device_unregister(&ecc->dma_slave);
2440         if (ecc->dma_memcpy)
2441                 dma_async_device_unregister(ecc->dma_memcpy);
2442         edma_free_slot(ecc, ecc->dummy_slot);
2443
2444         return 0;
2445 }
2446
2447 #ifdef CONFIG_PM_SLEEP
2448 static int edma_pm_suspend(struct device *dev)
2449 {
2450         struct edma_cc *ecc = dev_get_drvdata(dev);
2451         struct edma_chan *echan = ecc->slave_chans;
2452         int i;
2453
2454         for (i = 0; i < ecc->num_channels; i++) {
2455                 if (echan[i].alloced)
2456                         edma_setup_interrupt(&echan[i], false);
2457         }
2458
2459         return 0;
2460 }
2461
2462 static int edma_pm_resume(struct device *dev)
2463 {
2464         struct edma_cc *ecc = dev_get_drvdata(dev);
2465         struct edma_chan *echan = ecc->slave_chans;
2466         int i;
2467         s8 (*queue_priority_mapping)[2];
2468
2469         /* re initialize dummy slot to dummy param set */
2470         edma_write_slot(ecc, ecc->dummy_slot, &dummy_paramset);
2471
2472         queue_priority_mapping = ecc->info->queue_priority_mapping;
2473
2474         /* Event queue priority mapping */
2475         for (i = 0; queue_priority_mapping[i][0] != -1; i++)
2476                 edma_assign_priority_to_queue(ecc, queue_priority_mapping[i][0],
2477                                               queue_priority_mapping[i][1]);
2478
2479         for (i = 0; i < ecc->num_channels; i++) {
2480                 if (echan[i].alloced) {
2481                         /* ensure access through shadow region 0 */
2482                         edma_or_array2(ecc, EDMA_DRAE, 0, i >> 5,
2483                                        BIT(i & 0x1f));
2484
2485                         edma_setup_interrupt(&echan[i], true);
2486
2487                         /* Set up channel -> slot mapping for the entry slot */
2488                         edma_set_chmap(&echan[i], echan[i].slot[0]);
2489                 }
2490         }
2491
2492         return 0;
2493 }
2494 #endif
2495
2496 static const struct dev_pm_ops edma_pm_ops = {
2497         SET_LATE_SYSTEM_SLEEP_PM_OPS(edma_pm_suspend, edma_pm_resume)
2498 };
2499
2500 static struct platform_driver edma_driver = {
2501         .probe          = edma_probe,
2502         .remove         = edma_remove,
2503         .driver = {
2504                 .name   = "edma",
2505                 .pm     = &edma_pm_ops,
2506                 .of_match_table = edma_of_ids,
2507         },
2508 };
2509
2510 static int edma_tptc_probe(struct platform_device *pdev)
2511 {
2512         pm_runtime_enable(&pdev->dev);
2513         return pm_runtime_get_sync(&pdev->dev);
2514 }
2515
2516 static struct platform_driver edma_tptc_driver = {
2517         .probe          = edma_tptc_probe,
2518         .driver = {
2519                 .name   = "edma3-tptc",
2520                 .of_match_table = edma_tptc_of_ids,
2521         },
2522 };
2523
2524 bool edma_filter_fn(struct dma_chan *chan, void *param)
2525 {
2526         bool match = false;
2527
2528         if (chan->device->dev->driver == &edma_driver.driver) {
2529                 struct edma_chan *echan = to_edma_chan(chan);
2530                 unsigned ch_req = *(unsigned *)param;
2531                 if (ch_req == echan->ch_num) {
2532                         /* The channel is going to be used as HW synchronized */
2533                         echan->hw_triggered = true;
2534                         match = true;
2535                 }
2536         }
2537         return match;
2538 }
2539 EXPORT_SYMBOL(edma_filter_fn);
2540
2541 static int edma_init(void)
2542 {
2543         int ret;
2544
2545         ret = platform_driver_register(&edma_tptc_driver);
2546         if (ret)
2547                 return ret;
2548
2549         return platform_driver_register(&edma_driver);
2550 }
2551 subsys_initcall(edma_init);
2552
2553 static void __exit edma_exit(void)
2554 {
2555         platform_driver_unregister(&edma_driver);
2556         platform_driver_unregister(&edma_tptc_driver);
2557 }
2558 module_exit(edma_exit);
2559
2560 MODULE_AUTHOR("Matt Porter <matt.porter@linaro.org>");
2561 MODULE_DESCRIPTION("TI EDMA DMA engine driver");
2562 MODULE_LICENSE("GPL v2");