Linux 6.12-rc1
[linux-block.git] / drivers / devfreq / exynos-bus.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Generic Exynos Bus frequency driver with DEVFREQ Framework
4  *
5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6  * Author : Chanwoo Choi <cw00.choi@samsung.com>
7  *
8  * This driver support Exynos Bus frequency feature by using
9  * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
10  */
11
12 #include <linux/clk.h>
13 #include <linux/devfreq.h>
14 #include <linux/devfreq-event.h>
15 #include <linux/device.h>
16 #include <linux/export.h>
17 #include <linux/module.h>
18 #include <linux/of.h>
19 #include <linux/pm_opp.h>
20 #include <linux/platform_device.h>
21 #include <linux/regulator/consumer.h>
22
23 #define DEFAULT_SATURATION_RATIO        40
24
25 struct exynos_bus {
26         struct device *dev;
27         struct platform_device *icc_pdev;
28
29         struct devfreq *devfreq;
30         struct devfreq_event_dev **edev;
31         unsigned int edev_count;
32         struct mutex lock;
33
34         unsigned long curr_freq;
35
36         int opp_token;
37         struct clk *clk;
38         unsigned int ratio;
39 };
40
41 /*
42  * Control the devfreq-event device to get the current state of bus
43  */
44 #define exynos_bus_ops_edev(ops)                                \
45 static int exynos_bus_##ops(struct exynos_bus *bus)             \
46 {                                                               \
47         int i, ret;                                             \
48                                                                 \
49         for (i = 0; i < bus->edev_count; i++) {                 \
50                 if (!bus->edev[i])                              \
51                         continue;                               \
52                 ret = devfreq_event_##ops(bus->edev[i]);        \
53                 if (ret < 0)                                    \
54                         return ret;                             \
55         }                                                       \
56                                                                 \
57         return 0;                                               \
58 }
59 exynos_bus_ops_edev(enable_edev);
60 exynos_bus_ops_edev(disable_edev);
61 exynos_bus_ops_edev(set_event);
62
63 static int exynos_bus_get_event(struct exynos_bus *bus,
64                                 struct devfreq_event_data *edata)
65 {
66         struct devfreq_event_data event_data;
67         unsigned long load_count = 0, total_count = 0;
68         int i, ret = 0;
69
70         for (i = 0; i < bus->edev_count; i++) {
71                 if (!bus->edev[i])
72                         continue;
73
74                 ret = devfreq_event_get_event(bus->edev[i], &event_data);
75                 if (ret < 0)
76                         return ret;
77
78                 if (i == 0 || event_data.load_count > load_count) {
79                         load_count = event_data.load_count;
80                         total_count = event_data.total_count;
81                 }
82         }
83
84         edata->load_count = load_count;
85         edata->total_count = total_count;
86
87         return ret;
88 }
89
90 /*
91  * devfreq function for both simple-ondemand and passive governor
92  */
93 static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
94 {
95         struct exynos_bus *bus = dev_get_drvdata(dev);
96         struct dev_pm_opp *new_opp;
97         int ret = 0;
98
99         /* Get correct frequency for bus. */
100         new_opp = devfreq_recommended_opp(dev, freq, flags);
101         if (IS_ERR(new_opp)) {
102                 dev_err(dev, "failed to get recommended opp instance\n");
103                 return PTR_ERR(new_opp);
104         }
105
106         dev_pm_opp_put(new_opp);
107
108         /* Change voltage and frequency according to new OPP level */
109         mutex_lock(&bus->lock);
110         ret = dev_pm_opp_set_rate(dev, *freq);
111         if (!ret)
112                 bus->curr_freq = *freq;
113
114         mutex_unlock(&bus->lock);
115
116         return ret;
117 }
118
119 static int exynos_bus_get_dev_status(struct device *dev,
120                                      struct devfreq_dev_status *stat)
121 {
122         struct exynos_bus *bus = dev_get_drvdata(dev);
123         struct devfreq_event_data edata;
124         int ret;
125
126         stat->current_frequency = bus->curr_freq;
127
128         ret = exynos_bus_get_event(bus, &edata);
129         if (ret < 0) {
130                 dev_err(dev, "failed to get event from devfreq-event devices\n");
131                 stat->total_time = stat->busy_time = 0;
132                 goto err;
133         }
134
135         stat->busy_time = (edata.load_count * 100) / bus->ratio;
136         stat->total_time = edata.total_count;
137
138         dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
139                                                         stat->total_time);
140
141 err:
142         ret = exynos_bus_set_event(bus);
143         if (ret < 0) {
144                 dev_err(dev, "failed to set event to devfreq-event devices\n");
145                 return ret;
146         }
147
148         return ret;
149 }
150
151 static void exynos_bus_exit(struct device *dev)
152 {
153         struct exynos_bus *bus = dev_get_drvdata(dev);
154         int ret;
155
156         ret = exynos_bus_disable_edev(bus);
157         if (ret < 0)
158                 dev_warn(dev, "failed to disable the devfreq-event devices\n");
159
160         platform_device_unregister(bus->icc_pdev);
161
162         dev_pm_opp_of_remove_table(dev);
163         dev_pm_opp_put_regulators(bus->opp_token);
164 }
165
166 static void exynos_bus_passive_exit(struct device *dev)
167 {
168         struct exynos_bus *bus = dev_get_drvdata(dev);
169
170         platform_device_unregister(bus->icc_pdev);
171
172         dev_pm_opp_of_remove_table(dev);
173 }
174
175 static int exynos_bus_parent_parse_of(struct device_node *np,
176                                         struct exynos_bus *bus)
177 {
178         struct device *dev = bus->dev;
179         const char *supplies[] = { "vdd", NULL };
180         int i, ret, count, size;
181
182         ret = dev_pm_opp_set_regulators(dev, supplies);
183         if (ret < 0) {
184                 dev_err(dev, "failed to set regulators %d\n", ret);
185                 return ret;
186         }
187
188         bus->opp_token = ret;
189
190         /*
191          * Get the devfreq-event devices to get the current utilization of
192          * buses. This raw data will be used in devfreq ondemand governor.
193          */
194         count = devfreq_event_get_edev_count(dev, "devfreq-events");
195         if (count < 0) {
196                 dev_err(dev, "failed to get the count of devfreq-event dev\n");
197                 ret = count;
198                 goto err_regulator;
199         }
200         bus->edev_count = count;
201
202         size = sizeof(*bus->edev) * count;
203         bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
204         if (!bus->edev) {
205                 ret = -ENOMEM;
206                 goto err_regulator;
207         }
208
209         for (i = 0; i < count; i++) {
210                 bus->edev[i] = devfreq_event_get_edev_by_phandle(dev,
211                                                         "devfreq-events", i);
212                 if (IS_ERR(bus->edev[i])) {
213                         ret = -EPROBE_DEFER;
214                         goto err_regulator;
215                 }
216         }
217
218         /*
219          * Optionally, Get the saturation ratio according to Exynos SoC
220          * When measuring the utilization of each AXI bus with devfreq-event
221          * devices, the measured real cycle might be much lower than the
222          * total cycle of bus during sampling rate. In result, the devfreq
223          * simple-ondemand governor might not decide to change the current
224          * frequency due to too utilization (= real cycle/total cycle).
225          * So, this property is used to adjust the utilization when calculating
226          * the busy_time in exynos_bus_get_dev_status().
227          */
228         if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
229                 bus->ratio = DEFAULT_SATURATION_RATIO;
230
231         return 0;
232
233 err_regulator:
234         dev_pm_opp_put_regulators(bus->opp_token);
235
236         return ret;
237 }
238
239 static int exynos_bus_parse_of(struct device_node *np,
240                               struct exynos_bus *bus)
241 {
242         struct device *dev = bus->dev;
243         struct dev_pm_opp *opp;
244         unsigned long rate;
245         int ret;
246
247         /* Get the clock to provide each bus with source clock */
248         bus->clk = devm_clk_get_enabled(dev, "bus");
249         if (IS_ERR(bus->clk))
250                 return dev_err_probe(dev, PTR_ERR(bus->clk),
251                                 "failed to get bus clock\n");
252
253         /* Get the freq and voltage from OPP table to scale the bus freq */
254         ret = dev_pm_opp_of_add_table(dev);
255         if (ret < 0) {
256                 dev_err(dev, "failed to get OPP table\n");
257                 return ret;
258         }
259
260         rate = clk_get_rate(bus->clk);
261
262         opp = devfreq_recommended_opp(dev, &rate, 0);
263         if (IS_ERR(opp)) {
264                 dev_err(dev, "failed to find dev_pm_opp\n");
265                 ret = PTR_ERR(opp);
266                 goto err_opp;
267         }
268         bus->curr_freq = dev_pm_opp_get_freq(opp);
269         dev_pm_opp_put(opp);
270
271         return 0;
272
273 err_opp:
274         dev_pm_opp_of_remove_table(dev);
275
276         return ret;
277 }
278
279 static int exynos_bus_profile_init(struct exynos_bus *bus,
280                                    struct devfreq_dev_profile *profile)
281 {
282         struct device *dev = bus->dev;
283         struct devfreq_simple_ondemand_data *ondemand_data;
284         int ret;
285
286         /* Initialize the struct profile and governor data for parent device */
287         profile->polling_ms = 50;
288         profile->target = exynos_bus_target;
289         profile->get_dev_status = exynos_bus_get_dev_status;
290         profile->exit = exynos_bus_exit;
291
292         ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
293         if (!ondemand_data)
294                 return -ENOMEM;
295
296         ondemand_data->upthreshold = 40;
297         ondemand_data->downdifferential = 5;
298
299         /* Add devfreq device to monitor and handle the exynos bus */
300         bus->devfreq = devm_devfreq_add_device(dev, profile,
301                                                 DEVFREQ_GOV_SIMPLE_ONDEMAND,
302                                                 ondemand_data);
303         if (IS_ERR(bus->devfreq)) {
304                 dev_err(dev, "failed to add devfreq device\n");
305                 return PTR_ERR(bus->devfreq);
306         }
307
308         /* Register opp_notifier to catch the change of OPP  */
309         ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
310         if (ret < 0) {
311                 dev_err(dev, "failed to register opp notifier\n");
312                 return ret;
313         }
314
315         /*
316          * Enable devfreq-event to get raw data which is used to determine
317          * current bus load.
318          */
319         ret = exynos_bus_enable_edev(bus);
320         if (ret < 0) {
321                 dev_err(dev, "failed to enable devfreq-event devices\n");
322                 return ret;
323         }
324
325         ret = exynos_bus_set_event(bus);
326         if (ret < 0) {
327                 dev_err(dev, "failed to set event to devfreq-event devices\n");
328                 goto err_edev;
329         }
330
331         return 0;
332
333 err_edev:
334         if (exynos_bus_disable_edev(bus))
335                 dev_warn(dev, "failed to disable the devfreq-event devices\n");
336
337         return ret;
338 }
339
340 static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
341                                            struct devfreq_dev_profile *profile)
342 {
343         struct device *dev = bus->dev;
344         struct devfreq_passive_data *passive_data;
345         struct devfreq *parent_devfreq;
346
347         /* Initialize the struct profile and governor data for passive device */
348         profile->target = exynos_bus_target;
349         profile->exit = exynos_bus_passive_exit;
350
351         /* Get the instance of parent devfreq device */
352         parent_devfreq = devfreq_get_devfreq_by_phandle(dev, "devfreq", 0);
353         if (IS_ERR(parent_devfreq))
354                 return -EPROBE_DEFER;
355
356         passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
357         if (!passive_data)
358                 return -ENOMEM;
359
360         passive_data->parent = parent_devfreq;
361
362         /* Add devfreq device for exynos bus with passive governor */
363         bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
364                                                 passive_data);
365         if (IS_ERR(bus->devfreq)) {
366                 dev_err(dev,
367                         "failed to add devfreq dev with passive governor\n");
368                 return PTR_ERR(bus->devfreq);
369         }
370
371         return 0;
372 }
373
374 static int exynos_bus_probe(struct platform_device *pdev)
375 {
376         struct device *dev = &pdev->dev;
377         struct device_node *np = dev->of_node, *node;
378         struct devfreq_dev_profile *profile;
379         struct exynos_bus *bus;
380         int ret, max_state;
381         unsigned long min_freq, max_freq;
382         bool passive = false;
383
384         if (!np) {
385                 dev_err(dev, "failed to find devicetree node\n");
386                 return -EINVAL;
387         }
388
389         bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
390         if (!bus)
391                 return -ENOMEM;
392         mutex_init(&bus->lock);
393         bus->dev = &pdev->dev;
394         platform_set_drvdata(pdev, bus);
395
396         profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
397         if (!profile)
398                 return -ENOMEM;
399
400         node = of_parse_phandle(dev->of_node, "devfreq", 0);
401         if (node) {
402                 of_node_put(node);
403                 passive = true;
404         } else {
405                 ret = exynos_bus_parent_parse_of(np, bus);
406                 if (ret < 0)
407                         return ret;
408         }
409
410         /* Parse the device-tree to get the resource information */
411         ret = exynos_bus_parse_of(np, bus);
412         if (ret < 0)
413                 goto err_reg;
414
415         if (passive)
416                 ret = exynos_bus_profile_init_passive(bus, profile);
417         else
418                 ret = exynos_bus_profile_init(bus, profile);
419
420         if (ret < 0)
421                 goto err;
422
423         /* Create child platform device for the interconnect provider */
424         if (of_property_present(dev->of_node, "#interconnect-cells")) {
425                 bus->icc_pdev = platform_device_register_data(
426                                                 dev, "exynos-generic-icc",
427                                                 PLATFORM_DEVID_AUTO, NULL, 0);
428
429                 if (IS_ERR(bus->icc_pdev)) {
430                         ret = PTR_ERR(bus->icc_pdev);
431                         goto err;
432                 }
433         }
434
435         max_state = bus->devfreq->max_state;
436         min_freq = (bus->devfreq->freq_table[0] / 1000);
437         max_freq = (bus->devfreq->freq_table[max_state - 1] / 1000);
438         pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n",
439                         dev_name(dev), min_freq, max_freq);
440
441         return 0;
442
443 err:
444         dev_pm_opp_of_remove_table(dev);
445 err_reg:
446         dev_pm_opp_put_regulators(bus->opp_token);
447
448         return ret;
449 }
450
451 static void exynos_bus_shutdown(struct platform_device *pdev)
452 {
453         struct exynos_bus *bus = dev_get_drvdata(&pdev->dev);
454
455         devfreq_suspend_device(bus->devfreq);
456 }
457
458 static int exynos_bus_resume(struct device *dev)
459 {
460         struct exynos_bus *bus = dev_get_drvdata(dev);
461         int ret;
462
463         ret = exynos_bus_enable_edev(bus);
464         if (ret < 0) {
465                 dev_err(dev, "failed to enable the devfreq-event devices\n");
466                 return ret;
467         }
468
469         return 0;
470 }
471
472 static int exynos_bus_suspend(struct device *dev)
473 {
474         struct exynos_bus *bus = dev_get_drvdata(dev);
475         int ret;
476
477         ret = exynos_bus_disable_edev(bus);
478         if (ret < 0) {
479                 dev_err(dev, "failed to disable the devfreq-event devices\n");
480                 return ret;
481         }
482
483         return 0;
484 }
485
486 static DEFINE_SIMPLE_DEV_PM_OPS(exynos_bus_pm,
487                                 exynos_bus_suspend, exynos_bus_resume);
488
489 static const struct of_device_id exynos_bus_of_match[] = {
490         { .compatible = "samsung,exynos-bus", },
491         { /* sentinel */ },
492 };
493 MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
494
495 static struct platform_driver exynos_bus_platdrv = {
496         .probe          = exynos_bus_probe,
497         .shutdown       = exynos_bus_shutdown,
498         .driver = {
499                 .name   = "exynos-bus",
500                 .pm     = pm_sleep_ptr(&exynos_bus_pm),
501                 .of_match_table = exynos_bus_of_match,
502         },
503 };
504 module_platform_driver(exynos_bus_platdrv);
505
506 MODULE_SOFTDEP("pre: exynos_ppmu");
507 MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
508 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
509 MODULE_LICENSE("GPL v2");