Merge branches 'acpi-scan', 'acpi-tad', 'acpi-extlog' and 'acpi-misc'
[linux-block.git] / drivers / cxl / core / mbox.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright(c) 2020 Intel Corporation. All rights reserved. */
3 #include <linux/security.h>
4 #include <linux/debugfs.h>
5 #include <linux/ktime.h>
6 #include <linux/mutex.h>
7 #include <asm/unaligned.h>
8 #include <cxlpci.h>
9 #include <cxlmem.h>
10 #include <cxl.h>
11
12 #include "core.h"
13 #include "trace.h"
14
15 static bool cxl_raw_allow_all;
16
17 /**
18  * DOC: cxl mbox
19  *
20  * Core implementation of the CXL 2.0 Type-3 Memory Device Mailbox. The
21  * implementation is used by the cxl_pci driver to initialize the device
22  * and implement the cxl_mem.h IOCTL UAPI. It also implements the
23  * backend of the cxl_pmem_ctl() transport for LIBNVDIMM.
24  */
25
26 #define cxl_for_each_cmd(cmd)                                                  \
27         for ((cmd) = &cxl_mem_commands[0];                                     \
28              ((cmd) - cxl_mem_commands) < ARRAY_SIZE(cxl_mem_commands); (cmd)++)
29
30 #define CXL_CMD(_id, sin, sout, _flags)                                        \
31         [CXL_MEM_COMMAND_ID_##_id] = {                                         \
32         .info = {                                                              \
33                         .id = CXL_MEM_COMMAND_ID_##_id,                        \
34                         .size_in = sin,                                        \
35                         .size_out = sout,                                      \
36                 },                                                             \
37         .opcode = CXL_MBOX_OP_##_id,                                           \
38         .flags = _flags,                                                       \
39         }
40
41 #define CXL_VARIABLE_PAYLOAD    ~0U
42 /*
43  * This table defines the supported mailbox commands for the driver. This table
44  * is made up of a UAPI structure. Non-negative values as parameters in the
45  * table will be validated against the user's input. For example, if size_in is
46  * 0, and the user passed in 1, it is an error.
47  */
48 static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = {
49         CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE),
50 #ifdef CONFIG_CXL_MEM_RAW_COMMANDS
51         CXL_CMD(RAW, CXL_VARIABLE_PAYLOAD, CXL_VARIABLE_PAYLOAD, 0),
52 #endif
53         CXL_CMD(GET_SUPPORTED_LOGS, 0, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE),
54         CXL_CMD(GET_FW_INFO, 0, 0x50, 0),
55         CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0),
56         CXL_CMD(GET_LSA, 0x8, CXL_VARIABLE_PAYLOAD, 0),
57         CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0),
58         CXL_CMD(GET_LOG, 0x18, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE),
59         CXL_CMD(SET_PARTITION_INFO, 0x0a, 0, 0),
60         CXL_CMD(SET_LSA, CXL_VARIABLE_PAYLOAD, 0, 0),
61         CXL_CMD(GET_ALERT_CONFIG, 0, 0x10, 0),
62         CXL_CMD(SET_ALERT_CONFIG, 0xc, 0, 0),
63         CXL_CMD(GET_SHUTDOWN_STATE, 0, 0x1, 0),
64         CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0),
65         CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0),
66 };
67
68 /*
69  * Commands that RAW doesn't permit. The rationale for each:
70  *
71  * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment /
72  * coordination of transaction timeout values at the root bridge level.
73  *
74  * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live
75  * and needs to be coordinated with HDM updates.
76  *
77  * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the
78  * driver and any writes from userspace invalidates those contents.
79  *
80  * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes
81  * to the device after it is marked clean, userspace can not make that
82  * assertion.
83  *
84  * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that
85  * is kept up to date with patrol notifications and error management.
86  *
87  * CXL_MBOX_OP_[GET_,INJECT_,CLEAR_]POISON: These commands require kernel
88  * driver orchestration for safety.
89  */
90 static u16 cxl_disabled_raw_commands[] = {
91         CXL_MBOX_OP_ACTIVATE_FW,
92         CXL_MBOX_OP_SET_PARTITION_INFO,
93         CXL_MBOX_OP_SET_LSA,
94         CXL_MBOX_OP_SET_SHUTDOWN_STATE,
95         CXL_MBOX_OP_SCAN_MEDIA,
96         CXL_MBOX_OP_GET_SCAN_MEDIA,
97         CXL_MBOX_OP_GET_POISON,
98         CXL_MBOX_OP_INJECT_POISON,
99         CXL_MBOX_OP_CLEAR_POISON,
100 };
101
102 /*
103  * Command sets that RAW doesn't permit. All opcodes in this set are
104  * disabled because they pass plain text security payloads over the
105  * user/kernel boundary. This functionality is intended to be wrapped
106  * behind the keys ABI which allows for encrypted payloads in the UAPI
107  */
108 static u8 security_command_sets[] = {
109         0x44, /* Sanitize */
110         0x45, /* Persistent Memory Data-at-rest Security */
111         0x46, /* Security Passthrough */
112 };
113
114 static bool cxl_is_security_command(u16 opcode)
115 {
116         int i;
117
118         for (i = 0; i < ARRAY_SIZE(security_command_sets); i++)
119                 if (security_command_sets[i] == (opcode >> 8))
120                         return true;
121         return false;
122 }
123
124 static void cxl_set_security_cmd_enabled(struct cxl_security_state *security,
125                                          u16 opcode)
126 {
127         switch (opcode) {
128         case CXL_MBOX_OP_SANITIZE:
129                 set_bit(CXL_SEC_ENABLED_SANITIZE, security->enabled_cmds);
130                 break;
131         case CXL_MBOX_OP_SECURE_ERASE:
132                 set_bit(CXL_SEC_ENABLED_SECURE_ERASE,
133                         security->enabled_cmds);
134                 break;
135         case CXL_MBOX_OP_GET_SECURITY_STATE:
136                 set_bit(CXL_SEC_ENABLED_GET_SECURITY_STATE,
137                         security->enabled_cmds);
138                 break;
139         case CXL_MBOX_OP_SET_PASSPHRASE:
140                 set_bit(CXL_SEC_ENABLED_SET_PASSPHRASE,
141                         security->enabled_cmds);
142                 break;
143         case CXL_MBOX_OP_DISABLE_PASSPHRASE:
144                 set_bit(CXL_SEC_ENABLED_DISABLE_PASSPHRASE,
145                         security->enabled_cmds);
146                 break;
147         case CXL_MBOX_OP_UNLOCK:
148                 set_bit(CXL_SEC_ENABLED_UNLOCK, security->enabled_cmds);
149                 break;
150         case CXL_MBOX_OP_FREEZE_SECURITY:
151                 set_bit(CXL_SEC_ENABLED_FREEZE_SECURITY,
152                         security->enabled_cmds);
153                 break;
154         case CXL_MBOX_OP_PASSPHRASE_SECURE_ERASE:
155                 set_bit(CXL_SEC_ENABLED_PASSPHRASE_SECURE_ERASE,
156                         security->enabled_cmds);
157                 break;
158         default:
159                 break;
160         }
161 }
162
163 static bool cxl_is_poison_command(u16 opcode)
164 {
165 #define CXL_MBOX_OP_POISON_CMDS 0x43
166
167         if ((opcode >> 8) == CXL_MBOX_OP_POISON_CMDS)
168                 return true;
169
170         return false;
171 }
172
173 static void cxl_set_poison_cmd_enabled(struct cxl_poison_state *poison,
174                                        u16 opcode)
175 {
176         switch (opcode) {
177         case CXL_MBOX_OP_GET_POISON:
178                 set_bit(CXL_POISON_ENABLED_LIST, poison->enabled_cmds);
179                 break;
180         case CXL_MBOX_OP_INJECT_POISON:
181                 set_bit(CXL_POISON_ENABLED_INJECT, poison->enabled_cmds);
182                 break;
183         case CXL_MBOX_OP_CLEAR_POISON:
184                 set_bit(CXL_POISON_ENABLED_CLEAR, poison->enabled_cmds);
185                 break;
186         case CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS:
187                 set_bit(CXL_POISON_ENABLED_SCAN_CAPS, poison->enabled_cmds);
188                 break;
189         case CXL_MBOX_OP_SCAN_MEDIA:
190                 set_bit(CXL_POISON_ENABLED_SCAN_MEDIA, poison->enabled_cmds);
191                 break;
192         case CXL_MBOX_OP_GET_SCAN_MEDIA:
193                 set_bit(CXL_POISON_ENABLED_SCAN_RESULTS, poison->enabled_cmds);
194                 break;
195         default:
196                 break;
197         }
198 }
199
200 static struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
201 {
202         struct cxl_mem_command *c;
203
204         cxl_for_each_cmd(c)
205                 if (c->opcode == opcode)
206                         return c;
207
208         return NULL;
209 }
210
211 static const char *cxl_mem_opcode_to_name(u16 opcode)
212 {
213         struct cxl_mem_command *c;
214
215         c = cxl_mem_find_command(opcode);
216         if (!c)
217                 return NULL;
218
219         return cxl_command_names[c->info.id].name;
220 }
221
222 /**
223  * cxl_internal_send_cmd() - Kernel internal interface to send a mailbox command
224  * @mds: The driver data for the operation
225  * @mbox_cmd: initialized command to execute
226  *
227  * Context: Any context.
228  * Return:
229  *  * %>=0      - Number of bytes returned in @out.
230  *  * %-E2BIG   - Payload is too large for hardware.
231  *  * %-EBUSY   - Couldn't acquire exclusive mailbox access.
232  *  * %-EFAULT  - Hardware error occurred.
233  *  * %-ENXIO   - Command completed, but device reported an error.
234  *  * %-EIO     - Unexpected output size.
235  *
236  * Mailbox commands may execute successfully yet the device itself reported an
237  * error. While this distinction can be useful for commands from userspace, the
238  * kernel will only be able to use results when both are successful.
239  */
240 int cxl_internal_send_cmd(struct cxl_memdev_state *mds,
241                           struct cxl_mbox_cmd *mbox_cmd)
242 {
243         size_t out_size, min_out;
244         int rc;
245
246         if (mbox_cmd->size_in > mds->payload_size ||
247             mbox_cmd->size_out > mds->payload_size)
248                 return -E2BIG;
249
250         out_size = mbox_cmd->size_out;
251         min_out = mbox_cmd->min_out;
252         rc = mds->mbox_send(mds, mbox_cmd);
253         /*
254          * EIO is reserved for a payload size mismatch and mbox_send()
255          * may not return this error.
256          */
257         if (WARN_ONCE(rc == -EIO, "Bad return code: -EIO"))
258                 return -ENXIO;
259         if (rc)
260                 return rc;
261
262         if (mbox_cmd->return_code != CXL_MBOX_CMD_RC_SUCCESS &&
263             mbox_cmd->return_code != CXL_MBOX_CMD_RC_BACKGROUND)
264                 return cxl_mbox_cmd_rc2errno(mbox_cmd);
265
266         if (!out_size)
267                 return 0;
268
269         /*
270          * Variable sized output needs to at least satisfy the caller's
271          * minimum if not the fully requested size.
272          */
273         if (min_out == 0)
274                 min_out = out_size;
275
276         if (mbox_cmd->size_out < min_out)
277                 return -EIO;
278         return 0;
279 }
280 EXPORT_SYMBOL_NS_GPL(cxl_internal_send_cmd, CXL);
281
282 static bool cxl_mem_raw_command_allowed(u16 opcode)
283 {
284         int i;
285
286         if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS))
287                 return false;
288
289         if (security_locked_down(LOCKDOWN_PCI_ACCESS))
290                 return false;
291
292         if (cxl_raw_allow_all)
293                 return true;
294
295         if (cxl_is_security_command(opcode))
296                 return false;
297
298         for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++)
299                 if (cxl_disabled_raw_commands[i] == opcode)
300                         return false;
301
302         return true;
303 }
304
305 /**
306  * cxl_payload_from_user_allowed() - Check contents of in_payload.
307  * @opcode: The mailbox command opcode.
308  * @payload_in: Pointer to the input payload passed in from user space.
309  *
310  * Return:
311  *  * true      - payload_in passes check for @opcode.
312  *  * false     - payload_in contains invalid or unsupported values.
313  *
314  * The driver may inspect payload contents before sending a mailbox
315  * command from user space to the device. The intent is to reject
316  * commands with input payloads that are known to be unsafe. This
317  * check is not intended to replace the users careful selection of
318  * mailbox command parameters and makes no guarantee that the user
319  * command will succeed, nor that it is appropriate.
320  *
321  * The specific checks are determined by the opcode.
322  */
323 static bool cxl_payload_from_user_allowed(u16 opcode, void *payload_in)
324 {
325         switch (opcode) {
326         case CXL_MBOX_OP_SET_PARTITION_INFO: {
327                 struct cxl_mbox_set_partition_info *pi = payload_in;
328
329                 if (pi->flags & CXL_SET_PARTITION_IMMEDIATE_FLAG)
330                         return false;
331                 break;
332         }
333         default:
334                 break;
335         }
336         return true;
337 }
338
339 static int cxl_mbox_cmd_ctor(struct cxl_mbox_cmd *mbox,
340                              struct cxl_memdev_state *mds, u16 opcode,
341                              size_t in_size, size_t out_size, u64 in_payload)
342 {
343         *mbox = (struct cxl_mbox_cmd) {
344                 .opcode = opcode,
345                 .size_in = in_size,
346         };
347
348         if (in_size) {
349                 mbox->payload_in = vmemdup_user(u64_to_user_ptr(in_payload),
350                                                 in_size);
351                 if (IS_ERR(mbox->payload_in))
352                         return PTR_ERR(mbox->payload_in);
353
354                 if (!cxl_payload_from_user_allowed(opcode, mbox->payload_in)) {
355                         dev_dbg(mds->cxlds.dev, "%s: input payload not allowed\n",
356                                 cxl_mem_opcode_to_name(opcode));
357                         kvfree(mbox->payload_in);
358                         return -EBUSY;
359                 }
360         }
361
362         /* Prepare to handle a full payload for variable sized output */
363         if (out_size == CXL_VARIABLE_PAYLOAD)
364                 mbox->size_out = mds->payload_size;
365         else
366                 mbox->size_out = out_size;
367
368         if (mbox->size_out) {
369                 mbox->payload_out = kvzalloc(mbox->size_out, GFP_KERNEL);
370                 if (!mbox->payload_out) {
371                         kvfree(mbox->payload_in);
372                         return -ENOMEM;
373                 }
374         }
375         return 0;
376 }
377
378 static void cxl_mbox_cmd_dtor(struct cxl_mbox_cmd *mbox)
379 {
380         kvfree(mbox->payload_in);
381         kvfree(mbox->payload_out);
382 }
383
384 static int cxl_to_mem_cmd_raw(struct cxl_mem_command *mem_cmd,
385                               const struct cxl_send_command *send_cmd,
386                               struct cxl_memdev_state *mds)
387 {
388         if (send_cmd->raw.rsvd)
389                 return -EINVAL;
390
391         /*
392          * Unlike supported commands, the output size of RAW commands
393          * gets passed along without further checking, so it must be
394          * validated here.
395          */
396         if (send_cmd->out.size > mds->payload_size)
397                 return -EINVAL;
398
399         if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode))
400                 return -EPERM;
401
402         dev_WARN_ONCE(mds->cxlds.dev, true, "raw command path used\n");
403
404         *mem_cmd = (struct cxl_mem_command) {
405                 .info = {
406                         .id = CXL_MEM_COMMAND_ID_RAW,
407                         .size_in = send_cmd->in.size,
408                         .size_out = send_cmd->out.size,
409                 },
410                 .opcode = send_cmd->raw.opcode
411         };
412
413         return 0;
414 }
415
416 static int cxl_to_mem_cmd(struct cxl_mem_command *mem_cmd,
417                           const struct cxl_send_command *send_cmd,
418                           struct cxl_memdev_state *mds)
419 {
420         struct cxl_mem_command *c = &cxl_mem_commands[send_cmd->id];
421         const struct cxl_command_info *info = &c->info;
422
423         if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK)
424                 return -EINVAL;
425
426         if (send_cmd->rsvd)
427                 return -EINVAL;
428
429         if (send_cmd->in.rsvd || send_cmd->out.rsvd)
430                 return -EINVAL;
431
432         /* Check that the command is enabled for hardware */
433         if (!test_bit(info->id, mds->enabled_cmds))
434                 return -ENOTTY;
435
436         /* Check that the command is not claimed for exclusive kernel use */
437         if (test_bit(info->id, mds->exclusive_cmds))
438                 return -EBUSY;
439
440         /* Check the input buffer is the expected size */
441         if ((info->size_in != CXL_VARIABLE_PAYLOAD) &&
442             (info->size_in != send_cmd->in.size))
443                 return -ENOMEM;
444
445         /* Check the output buffer is at least large enough */
446         if ((info->size_out != CXL_VARIABLE_PAYLOAD) &&
447             (send_cmd->out.size < info->size_out))
448                 return -ENOMEM;
449
450         *mem_cmd = (struct cxl_mem_command) {
451                 .info = {
452                         .id = info->id,
453                         .flags = info->flags,
454                         .size_in = send_cmd->in.size,
455                         .size_out = send_cmd->out.size,
456                 },
457                 .opcode = c->opcode
458         };
459
460         return 0;
461 }
462
463 /**
464  * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND.
465  * @mbox_cmd: Sanitized and populated &struct cxl_mbox_cmd.
466  * @mds: The driver data for the operation
467  * @send_cmd: &struct cxl_send_command copied in from userspace.
468  *
469  * Return:
470  *  * %0        - @out_cmd is ready to send.
471  *  * %-ENOTTY  - Invalid command specified.
472  *  * %-EINVAL  - Reserved fields or invalid values were used.
473  *  * %-ENOMEM  - Input or output buffer wasn't sized properly.
474  *  * %-EPERM   - Attempted to use a protected command.
475  *  * %-EBUSY   - Kernel has claimed exclusive access to this opcode
476  *
477  * The result of this command is a fully validated command in @mbox_cmd that is
478  * safe to send to the hardware.
479  */
480 static int cxl_validate_cmd_from_user(struct cxl_mbox_cmd *mbox_cmd,
481                                       struct cxl_memdev_state *mds,
482                                       const struct cxl_send_command *send_cmd)
483 {
484         struct cxl_mem_command mem_cmd;
485         int rc;
486
487         if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX)
488                 return -ENOTTY;
489
490         /*
491          * The user can never specify an input payload larger than what hardware
492          * supports, but output can be arbitrarily large (simply write out as
493          * much data as the hardware provides).
494          */
495         if (send_cmd->in.size > mds->payload_size)
496                 return -EINVAL;
497
498         /* Sanitize and construct a cxl_mem_command */
499         if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW)
500                 rc = cxl_to_mem_cmd_raw(&mem_cmd, send_cmd, mds);
501         else
502                 rc = cxl_to_mem_cmd(&mem_cmd, send_cmd, mds);
503
504         if (rc)
505                 return rc;
506
507         /* Sanitize and construct a cxl_mbox_cmd */
508         return cxl_mbox_cmd_ctor(mbox_cmd, mds, mem_cmd.opcode,
509                                  mem_cmd.info.size_in, mem_cmd.info.size_out,
510                                  send_cmd->in.payload);
511 }
512
513 int cxl_query_cmd(struct cxl_memdev *cxlmd,
514                   struct cxl_mem_query_commands __user *q)
515 {
516         struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds);
517         struct device *dev = &cxlmd->dev;
518         struct cxl_mem_command *cmd;
519         u32 n_commands;
520         int j = 0;
521
522         dev_dbg(dev, "Query IOCTL\n");
523
524         if (get_user(n_commands, &q->n_commands))
525                 return -EFAULT;
526
527         /* returns the total number if 0 elements are requested. */
528         if (n_commands == 0)
529                 return put_user(ARRAY_SIZE(cxl_mem_commands), &q->n_commands);
530
531         /*
532          * otherwise, return max(n_commands, total commands) cxl_command_info
533          * structures.
534          */
535         cxl_for_each_cmd(cmd) {
536                 struct cxl_command_info info = cmd->info;
537
538                 if (test_bit(info.id, mds->enabled_cmds))
539                         info.flags |= CXL_MEM_COMMAND_FLAG_ENABLED;
540                 if (test_bit(info.id, mds->exclusive_cmds))
541                         info.flags |= CXL_MEM_COMMAND_FLAG_EXCLUSIVE;
542
543                 if (copy_to_user(&q->commands[j++], &info, sizeof(info)))
544                         return -EFAULT;
545
546                 if (j == n_commands)
547                         break;
548         }
549
550         return 0;
551 }
552
553 /**
554  * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace.
555  * @mds: The driver data for the operation
556  * @mbox_cmd: The validated mailbox command.
557  * @out_payload: Pointer to userspace's output payload.
558  * @size_out: (Input) Max payload size to copy out.
559  *            (Output) Payload size hardware generated.
560  * @retval: Hardware generated return code from the operation.
561  *
562  * Return:
563  *  * %0        - Mailbox transaction succeeded. This implies the mailbox
564  *                protocol completed successfully not that the operation itself
565  *                was successful.
566  *  * %-ENOMEM  - Couldn't allocate a bounce buffer.
567  *  * %-EFAULT  - Something happened with copy_to/from_user.
568  *  * %-EINTR   - Mailbox acquisition interrupted.
569  *  * %-EXXX    - Transaction level failures.
570  *
571  * Dispatches a mailbox command on behalf of a userspace request.
572  * The output payload is copied to userspace.
573  *
574  * See cxl_send_cmd().
575  */
576 static int handle_mailbox_cmd_from_user(struct cxl_memdev_state *mds,
577                                         struct cxl_mbox_cmd *mbox_cmd,
578                                         u64 out_payload, s32 *size_out,
579                                         u32 *retval)
580 {
581         struct device *dev = mds->cxlds.dev;
582         int rc;
583
584         dev_dbg(dev,
585                 "Submitting %s command for user\n"
586                 "\topcode: %x\n"
587                 "\tsize: %zx\n",
588                 cxl_mem_opcode_to_name(mbox_cmd->opcode),
589                 mbox_cmd->opcode, mbox_cmd->size_in);
590
591         rc = mds->mbox_send(mds, mbox_cmd);
592         if (rc)
593                 goto out;
594
595         /*
596          * @size_out contains the max size that's allowed to be written back out
597          * to userspace. While the payload may have written more output than
598          * this it will have to be ignored.
599          */
600         if (mbox_cmd->size_out) {
601                 dev_WARN_ONCE(dev, mbox_cmd->size_out > *size_out,
602                               "Invalid return size\n");
603                 if (copy_to_user(u64_to_user_ptr(out_payload),
604                                  mbox_cmd->payload_out, mbox_cmd->size_out)) {
605                         rc = -EFAULT;
606                         goto out;
607                 }
608         }
609
610         *size_out = mbox_cmd->size_out;
611         *retval = mbox_cmd->return_code;
612
613 out:
614         cxl_mbox_cmd_dtor(mbox_cmd);
615         return rc;
616 }
617
618 int cxl_send_cmd(struct cxl_memdev *cxlmd, struct cxl_send_command __user *s)
619 {
620         struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds);
621         struct device *dev = &cxlmd->dev;
622         struct cxl_send_command send;
623         struct cxl_mbox_cmd mbox_cmd;
624         int rc;
625
626         dev_dbg(dev, "Send IOCTL\n");
627
628         if (copy_from_user(&send, s, sizeof(send)))
629                 return -EFAULT;
630
631         rc = cxl_validate_cmd_from_user(&mbox_cmd, mds, &send);
632         if (rc)
633                 return rc;
634
635         rc = handle_mailbox_cmd_from_user(mds, &mbox_cmd, send.out.payload,
636                                           &send.out.size, &send.retval);
637         if (rc)
638                 return rc;
639
640         if (copy_to_user(s, &send, sizeof(send)))
641                 return -EFAULT;
642
643         return 0;
644 }
645
646 static int cxl_xfer_log(struct cxl_memdev_state *mds, uuid_t *uuid,
647                         u32 *size, u8 *out)
648 {
649         u32 remaining = *size;
650         u32 offset = 0;
651
652         while (remaining) {
653                 u32 xfer_size = min_t(u32, remaining, mds->payload_size);
654                 struct cxl_mbox_cmd mbox_cmd;
655                 struct cxl_mbox_get_log log;
656                 int rc;
657
658                 log = (struct cxl_mbox_get_log) {
659                         .uuid = *uuid,
660                         .offset = cpu_to_le32(offset),
661                         .length = cpu_to_le32(xfer_size),
662                 };
663
664                 mbox_cmd = (struct cxl_mbox_cmd) {
665                         .opcode = CXL_MBOX_OP_GET_LOG,
666                         .size_in = sizeof(log),
667                         .payload_in = &log,
668                         .size_out = xfer_size,
669                         .payload_out = out,
670                 };
671
672                 rc = cxl_internal_send_cmd(mds, &mbox_cmd);
673
674                 /*
675                  * The output payload length that indicates the number
676                  * of valid bytes can be smaller than the Log buffer
677                  * size.
678                  */
679                 if (rc == -EIO && mbox_cmd.size_out < xfer_size) {
680                         offset += mbox_cmd.size_out;
681                         break;
682                 }
683
684                 if (rc < 0)
685                         return rc;
686
687                 out += xfer_size;
688                 remaining -= xfer_size;
689                 offset += xfer_size;
690         }
691
692         *size = offset;
693
694         return 0;
695 }
696
697 /**
698  * cxl_walk_cel() - Walk through the Command Effects Log.
699  * @mds: The driver data for the operation
700  * @size: Length of the Command Effects Log.
701  * @cel: CEL
702  *
703  * Iterate over each entry in the CEL and determine if the driver supports the
704  * command. If so, the command is enabled for the device and can be used later.
705  */
706 static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel)
707 {
708         struct cxl_cel_entry *cel_entry;
709         const int cel_entries = size / sizeof(*cel_entry);
710         struct device *dev = mds->cxlds.dev;
711         int i;
712
713         cel_entry = (struct cxl_cel_entry *) cel;
714
715         for (i = 0; i < cel_entries; i++) {
716                 u16 opcode = le16_to_cpu(cel_entry[i].opcode);
717                 struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
718
719                 if (!cmd && (!cxl_is_poison_command(opcode) ||
720                              !cxl_is_security_command(opcode))) {
721                         dev_dbg(dev,
722                                 "Opcode 0x%04x unsupported by driver\n", opcode);
723                         continue;
724                 }
725
726                 if (cmd)
727                         set_bit(cmd->info.id, mds->enabled_cmds);
728
729                 if (cxl_is_poison_command(opcode))
730                         cxl_set_poison_cmd_enabled(&mds->poison, opcode);
731
732                 if (cxl_is_security_command(opcode))
733                         cxl_set_security_cmd_enabled(&mds->security, opcode);
734
735                 dev_dbg(dev, "Opcode 0x%04x enabled\n", opcode);
736         }
737 }
738
739 static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_memdev_state *mds)
740 {
741         struct cxl_mbox_get_supported_logs *ret;
742         struct cxl_mbox_cmd mbox_cmd;
743         int rc;
744
745         ret = kvmalloc(mds->payload_size, GFP_KERNEL);
746         if (!ret)
747                 return ERR_PTR(-ENOMEM);
748
749         mbox_cmd = (struct cxl_mbox_cmd) {
750                 .opcode = CXL_MBOX_OP_GET_SUPPORTED_LOGS,
751                 .size_out = mds->payload_size,
752                 .payload_out = ret,
753                 /* At least the record number field must be valid */
754                 .min_out = 2,
755         };
756         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
757         if (rc < 0) {
758                 kvfree(ret);
759                 return ERR_PTR(rc);
760         }
761
762
763         return ret;
764 }
765
766 enum {
767         CEL_UUID,
768         VENDOR_DEBUG_UUID,
769 };
770
771 /* See CXL 2.0 Table 170. Get Log Input Payload */
772 static const uuid_t log_uuid[] = {
773         [CEL_UUID] = DEFINE_CXL_CEL_UUID,
774         [VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID,
775 };
776
777 /**
778  * cxl_enumerate_cmds() - Enumerate commands for a device.
779  * @mds: The driver data for the operation
780  *
781  * Returns 0 if enumerate completed successfully.
782  *
783  * CXL devices have optional support for certain commands. This function will
784  * determine the set of supported commands for the hardware and update the
785  * enabled_cmds bitmap in the @mds.
786  */
787 int cxl_enumerate_cmds(struct cxl_memdev_state *mds)
788 {
789         struct cxl_mbox_get_supported_logs *gsl;
790         struct device *dev = mds->cxlds.dev;
791         struct cxl_mem_command *cmd;
792         int i, rc;
793
794         gsl = cxl_get_gsl(mds);
795         if (IS_ERR(gsl))
796                 return PTR_ERR(gsl);
797
798         rc = -ENOENT;
799         for (i = 0; i < le16_to_cpu(gsl->entries); i++) {
800                 u32 size = le32_to_cpu(gsl->entry[i].size);
801                 uuid_t uuid = gsl->entry[i].uuid;
802                 u8 *log;
803
804                 dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size);
805
806                 if (!uuid_equal(&uuid, &log_uuid[CEL_UUID]))
807                         continue;
808
809                 log = kvmalloc(size, GFP_KERNEL);
810                 if (!log) {
811                         rc = -ENOMEM;
812                         goto out;
813                 }
814
815                 rc = cxl_xfer_log(mds, &uuid, &size, log);
816                 if (rc) {
817                         kvfree(log);
818                         goto out;
819                 }
820
821                 cxl_walk_cel(mds, size, log);
822                 kvfree(log);
823
824                 /* In case CEL was bogus, enable some default commands. */
825                 cxl_for_each_cmd(cmd)
826                         if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE)
827                                 set_bit(cmd->info.id, mds->enabled_cmds);
828
829                 /* Found the required CEL */
830                 rc = 0;
831         }
832 out:
833         kvfree(gsl);
834         return rc;
835 }
836 EXPORT_SYMBOL_NS_GPL(cxl_enumerate_cmds, CXL);
837
838 /*
839  * General Media Event Record
840  * CXL rev 3.0 Section 8.2.9.2.1.1; Table 8-43
841  */
842 static const uuid_t gen_media_event_uuid =
843         UUID_INIT(0xfbcd0a77, 0xc260, 0x417f,
844                   0x85, 0xa9, 0x08, 0x8b, 0x16, 0x21, 0xeb, 0xa6);
845
846 /*
847  * DRAM Event Record
848  * CXL rev 3.0 section 8.2.9.2.1.2; Table 8-44
849  */
850 static const uuid_t dram_event_uuid =
851         UUID_INIT(0x601dcbb3, 0x9c06, 0x4eab,
852                   0xb8, 0xaf, 0x4e, 0x9b, 0xfb, 0x5c, 0x96, 0x24);
853
854 /*
855  * Memory Module Event Record
856  * CXL rev 3.0 section 8.2.9.2.1.3; Table 8-45
857  */
858 static const uuid_t mem_mod_event_uuid =
859         UUID_INIT(0xfe927475, 0xdd59, 0x4339,
860                   0xa5, 0x86, 0x79, 0xba, 0xb1, 0x13, 0xb7, 0x74);
861
862 static void cxl_event_trace_record(const struct cxl_memdev *cxlmd,
863                                    enum cxl_event_log_type type,
864                                    struct cxl_event_record_raw *record)
865 {
866         uuid_t *id = &record->hdr.id;
867
868         if (uuid_equal(id, &gen_media_event_uuid)) {
869                 struct cxl_event_gen_media *rec =
870                                 (struct cxl_event_gen_media *)record;
871
872                 trace_cxl_general_media(cxlmd, type, rec);
873         } else if (uuid_equal(id, &dram_event_uuid)) {
874                 struct cxl_event_dram *rec = (struct cxl_event_dram *)record;
875
876                 trace_cxl_dram(cxlmd, type, rec);
877         } else if (uuid_equal(id, &mem_mod_event_uuid)) {
878                 struct cxl_event_mem_module *rec =
879                                 (struct cxl_event_mem_module *)record;
880
881                 trace_cxl_memory_module(cxlmd, type, rec);
882         } else {
883                 /* For unknown record types print just the header */
884                 trace_cxl_generic_event(cxlmd, type, record);
885         }
886 }
887
888 static int cxl_clear_event_record(struct cxl_memdev_state *mds,
889                                   enum cxl_event_log_type log,
890                                   struct cxl_get_event_payload *get_pl)
891 {
892         struct cxl_mbox_clear_event_payload *payload;
893         u16 total = le16_to_cpu(get_pl->record_count);
894         u8 max_handles = CXL_CLEAR_EVENT_MAX_HANDLES;
895         size_t pl_size = struct_size(payload, handles, max_handles);
896         struct cxl_mbox_cmd mbox_cmd;
897         u16 cnt;
898         int rc = 0;
899         int i;
900
901         /* Payload size may limit the max handles */
902         if (pl_size > mds->payload_size) {
903                 max_handles = (mds->payload_size - sizeof(*payload)) /
904                               sizeof(__le16);
905                 pl_size = struct_size(payload, handles, max_handles);
906         }
907
908         payload = kvzalloc(pl_size, GFP_KERNEL);
909         if (!payload)
910                 return -ENOMEM;
911
912         *payload = (struct cxl_mbox_clear_event_payload) {
913                 .event_log = log,
914         };
915
916         mbox_cmd = (struct cxl_mbox_cmd) {
917                 .opcode = CXL_MBOX_OP_CLEAR_EVENT_RECORD,
918                 .payload_in = payload,
919                 .size_in = pl_size,
920         };
921
922         /*
923          * Clear Event Records uses u8 for the handle cnt while Get Event
924          * Record can return up to 0xffff records.
925          */
926         i = 0;
927         for (cnt = 0; cnt < total; cnt++) {
928                 payload->handles[i++] = get_pl->records[cnt].hdr.handle;
929                 dev_dbg(mds->cxlds.dev, "Event log '%d': Clearing %u\n", log,
930                         le16_to_cpu(payload->handles[i]));
931
932                 if (i == max_handles) {
933                         payload->nr_recs = i;
934                         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
935                         if (rc)
936                                 goto free_pl;
937                         i = 0;
938                 }
939         }
940
941         /* Clear what is left if any */
942         if (i) {
943                 payload->nr_recs = i;
944                 mbox_cmd.size_in = struct_size(payload, handles, i);
945                 rc = cxl_internal_send_cmd(mds, &mbox_cmd);
946                 if (rc)
947                         goto free_pl;
948         }
949
950 free_pl:
951         kvfree(payload);
952         return rc;
953 }
954
955 static void cxl_mem_get_records_log(struct cxl_memdev_state *mds,
956                                     enum cxl_event_log_type type)
957 {
958         struct cxl_memdev *cxlmd = mds->cxlds.cxlmd;
959         struct device *dev = mds->cxlds.dev;
960         struct cxl_get_event_payload *payload;
961         struct cxl_mbox_cmd mbox_cmd;
962         u8 log_type = type;
963         u16 nr_rec;
964
965         mutex_lock(&mds->event.log_lock);
966         payload = mds->event.buf;
967
968         mbox_cmd = (struct cxl_mbox_cmd) {
969                 .opcode = CXL_MBOX_OP_GET_EVENT_RECORD,
970                 .payload_in = &log_type,
971                 .size_in = sizeof(log_type),
972                 .payload_out = payload,
973                 .size_out = mds->payload_size,
974                 .min_out = struct_size(payload, records, 0),
975         };
976
977         do {
978                 int rc, i;
979
980                 rc = cxl_internal_send_cmd(mds, &mbox_cmd);
981                 if (rc) {
982                         dev_err_ratelimited(dev,
983                                 "Event log '%d': Failed to query event records : %d",
984                                 type, rc);
985                         break;
986                 }
987
988                 nr_rec = le16_to_cpu(payload->record_count);
989                 if (!nr_rec)
990                         break;
991
992                 for (i = 0; i < nr_rec; i++)
993                         cxl_event_trace_record(cxlmd, type,
994                                                &payload->records[i]);
995
996                 if (payload->flags & CXL_GET_EVENT_FLAG_OVERFLOW)
997                         trace_cxl_overflow(cxlmd, type, payload);
998
999                 rc = cxl_clear_event_record(mds, type, payload);
1000                 if (rc) {
1001                         dev_err_ratelimited(dev,
1002                                 "Event log '%d': Failed to clear events : %d",
1003                                 type, rc);
1004                         break;
1005                 }
1006         } while (nr_rec);
1007
1008         mutex_unlock(&mds->event.log_lock);
1009 }
1010
1011 /**
1012  * cxl_mem_get_event_records - Get Event Records from the device
1013  * @mds: The driver data for the operation
1014  * @status: Event Status register value identifying which events are available.
1015  *
1016  * Retrieve all event records available on the device, report them as trace
1017  * events, and clear them.
1018  *
1019  * See CXL rev 3.0 @8.2.9.2.2 Get Event Records
1020  * See CXL rev 3.0 @8.2.9.2.3 Clear Event Records
1021  */
1022 void cxl_mem_get_event_records(struct cxl_memdev_state *mds, u32 status)
1023 {
1024         dev_dbg(mds->cxlds.dev, "Reading event logs: %x\n", status);
1025
1026         if (status & CXLDEV_EVENT_STATUS_FATAL)
1027                 cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_FATAL);
1028         if (status & CXLDEV_EVENT_STATUS_FAIL)
1029                 cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_FAIL);
1030         if (status & CXLDEV_EVENT_STATUS_WARN)
1031                 cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_WARN);
1032         if (status & CXLDEV_EVENT_STATUS_INFO)
1033                 cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_INFO);
1034 }
1035 EXPORT_SYMBOL_NS_GPL(cxl_mem_get_event_records, CXL);
1036
1037 /**
1038  * cxl_mem_get_partition_info - Get partition info
1039  * @mds: The driver data for the operation
1040  *
1041  * Retrieve the current partition info for the device specified.  The active
1042  * values are the current capacity in bytes.  If not 0, the 'next' values are
1043  * the pending values, in bytes, which take affect on next cold reset.
1044  *
1045  * Return: 0 if no error: or the result of the mailbox command.
1046  *
1047  * See CXL @8.2.9.5.2.1 Get Partition Info
1048  */
1049 static int cxl_mem_get_partition_info(struct cxl_memdev_state *mds)
1050 {
1051         struct cxl_mbox_get_partition_info pi;
1052         struct cxl_mbox_cmd mbox_cmd;
1053         int rc;
1054
1055         mbox_cmd = (struct cxl_mbox_cmd) {
1056                 .opcode = CXL_MBOX_OP_GET_PARTITION_INFO,
1057                 .size_out = sizeof(pi),
1058                 .payload_out = &pi,
1059         };
1060         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
1061         if (rc)
1062                 return rc;
1063
1064         mds->active_volatile_bytes =
1065                 le64_to_cpu(pi.active_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
1066         mds->active_persistent_bytes =
1067                 le64_to_cpu(pi.active_persistent_cap) * CXL_CAPACITY_MULTIPLIER;
1068         mds->next_volatile_bytes =
1069                 le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
1070         mds->next_persistent_bytes =
1071                 le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
1072
1073         return 0;
1074 }
1075
1076 /**
1077  * cxl_dev_state_identify() - Send the IDENTIFY command to the device.
1078  * @mds: The driver data for the operation
1079  *
1080  * Return: 0 if identify was executed successfully or media not ready.
1081  *
1082  * This will dispatch the identify command to the device and on success populate
1083  * structures to be exported to sysfs.
1084  */
1085 int cxl_dev_state_identify(struct cxl_memdev_state *mds)
1086 {
1087         /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */
1088         struct cxl_mbox_identify id;
1089         struct cxl_mbox_cmd mbox_cmd;
1090         u32 val;
1091         int rc;
1092
1093         if (!mds->cxlds.media_ready)
1094                 return 0;
1095
1096         mbox_cmd = (struct cxl_mbox_cmd) {
1097                 .opcode = CXL_MBOX_OP_IDENTIFY,
1098                 .size_out = sizeof(id),
1099                 .payload_out = &id,
1100         };
1101         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
1102         if (rc < 0)
1103                 return rc;
1104
1105         mds->total_bytes =
1106                 le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER;
1107         mds->volatile_only_bytes =
1108                 le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER;
1109         mds->persistent_only_bytes =
1110                 le64_to_cpu(id.persistent_capacity) * CXL_CAPACITY_MULTIPLIER;
1111         mds->partition_align_bytes =
1112                 le64_to_cpu(id.partition_align) * CXL_CAPACITY_MULTIPLIER;
1113
1114         mds->lsa_size = le32_to_cpu(id.lsa_size);
1115         memcpy(mds->firmware_version, id.fw_revision,
1116                sizeof(id.fw_revision));
1117
1118         if (test_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds)) {
1119                 val = get_unaligned_le24(id.poison_list_max_mer);
1120                 mds->poison.max_errors = min_t(u32, val, CXL_POISON_LIST_MAX);
1121         }
1122
1123         return 0;
1124 }
1125 EXPORT_SYMBOL_NS_GPL(cxl_dev_state_identify, CXL);
1126
1127 /**
1128  * cxl_mem_sanitize() - Send a sanitization command to the device.
1129  * @mds: The device data for the operation
1130  * @cmd: The specific sanitization command opcode
1131  *
1132  * Return: 0 if the command was executed successfully, regardless of
1133  * whether or not the actual security operation is done in the background,
1134  * such as for the Sanitize case.
1135  * Error return values can be the result of the mailbox command, -EINVAL
1136  * when security requirements are not met or invalid contexts.
1137  *
1138  * See CXL 3.0 @8.2.9.8.5.1 Sanitize and @8.2.9.8.5.2 Secure Erase.
1139  */
1140 int cxl_mem_sanitize(struct cxl_memdev_state *mds, u16 cmd)
1141 {
1142         int rc;
1143         u32 sec_out = 0;
1144         struct cxl_get_security_output {
1145                 __le32 flags;
1146         } out;
1147         struct cxl_mbox_cmd sec_cmd = {
1148                 .opcode = CXL_MBOX_OP_GET_SECURITY_STATE,
1149                 .payload_out = &out,
1150                 .size_out = sizeof(out),
1151         };
1152         struct cxl_mbox_cmd mbox_cmd = { .opcode = cmd };
1153         struct cxl_dev_state *cxlds = &mds->cxlds;
1154
1155         if (cmd != CXL_MBOX_OP_SANITIZE && cmd != CXL_MBOX_OP_SECURE_ERASE)
1156                 return -EINVAL;
1157
1158         rc = cxl_internal_send_cmd(mds, &sec_cmd);
1159         if (rc < 0) {
1160                 dev_err(cxlds->dev, "Failed to get security state : %d", rc);
1161                 return rc;
1162         }
1163
1164         /*
1165          * Prior to using these commands, any security applied to
1166          * the user data areas of the device shall be DISABLED (or
1167          * UNLOCKED for secure erase case).
1168          */
1169         sec_out = le32_to_cpu(out.flags);
1170         if (sec_out & CXL_PMEM_SEC_STATE_USER_PASS_SET)
1171                 return -EINVAL;
1172
1173         if (cmd == CXL_MBOX_OP_SECURE_ERASE &&
1174             sec_out & CXL_PMEM_SEC_STATE_LOCKED)
1175                 return -EINVAL;
1176
1177         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
1178         if (rc < 0) {
1179                 dev_err(cxlds->dev, "Failed to sanitize device : %d", rc);
1180                 return rc;
1181         }
1182
1183         return 0;
1184 }
1185 EXPORT_SYMBOL_NS_GPL(cxl_mem_sanitize, CXL);
1186
1187 static int add_dpa_res(struct device *dev, struct resource *parent,
1188                        struct resource *res, resource_size_t start,
1189                        resource_size_t size, const char *type)
1190 {
1191         int rc;
1192
1193         res->name = type;
1194         res->start = start;
1195         res->end = start + size - 1;
1196         res->flags = IORESOURCE_MEM;
1197         if (resource_size(res) == 0) {
1198                 dev_dbg(dev, "DPA(%s): no capacity\n", res->name);
1199                 return 0;
1200         }
1201         rc = request_resource(parent, res);
1202         if (rc) {
1203                 dev_err(dev, "DPA(%s): failed to track %pr (%d)\n", res->name,
1204                         res, rc);
1205                 return rc;
1206         }
1207
1208         dev_dbg(dev, "DPA(%s): %pr\n", res->name, res);
1209
1210         return 0;
1211 }
1212
1213 int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
1214 {
1215         struct cxl_dev_state *cxlds = &mds->cxlds;
1216         struct device *dev = cxlds->dev;
1217         int rc;
1218
1219         if (!cxlds->media_ready) {
1220                 cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
1221                 cxlds->ram_res = DEFINE_RES_MEM(0, 0);
1222                 cxlds->pmem_res = DEFINE_RES_MEM(0, 0);
1223                 return 0;
1224         }
1225
1226         cxlds->dpa_res =
1227                 (struct resource)DEFINE_RES_MEM(0, mds->total_bytes);
1228
1229         if (mds->partition_align_bytes == 0) {
1230                 rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
1231                                  mds->volatile_only_bytes, "ram");
1232                 if (rc)
1233                         return rc;
1234                 return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res,
1235                                    mds->volatile_only_bytes,
1236                                    mds->persistent_only_bytes, "pmem");
1237         }
1238
1239         rc = cxl_mem_get_partition_info(mds);
1240         if (rc) {
1241                 dev_err(dev, "Failed to query partition information\n");
1242                 return rc;
1243         }
1244
1245         rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
1246                          mds->active_volatile_bytes, "ram");
1247         if (rc)
1248                 return rc;
1249         return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res,
1250                            mds->active_volatile_bytes,
1251                            mds->active_persistent_bytes, "pmem");
1252 }
1253 EXPORT_SYMBOL_NS_GPL(cxl_mem_create_range_info, CXL);
1254
1255 int cxl_set_timestamp(struct cxl_memdev_state *mds)
1256 {
1257         struct cxl_mbox_cmd mbox_cmd;
1258         struct cxl_mbox_set_timestamp_in pi;
1259         int rc;
1260
1261         pi.timestamp = cpu_to_le64(ktime_get_real_ns());
1262         mbox_cmd = (struct cxl_mbox_cmd) {
1263                 .opcode = CXL_MBOX_OP_SET_TIMESTAMP,
1264                 .size_in = sizeof(pi),
1265                 .payload_in = &pi,
1266         };
1267
1268         rc = cxl_internal_send_cmd(mds, &mbox_cmd);
1269         /*
1270          * Command is optional. Devices may have another way of providing
1271          * a timestamp, or may return all 0s in timestamp fields.
1272          * Don't report an error if this command isn't supported
1273          */
1274         if (rc && (mbox_cmd.return_code != CXL_MBOX_CMD_RC_UNSUPPORTED))
1275                 return rc;
1276
1277         return 0;
1278 }
1279 EXPORT_SYMBOL_NS_GPL(cxl_set_timestamp, CXL);
1280
1281 int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
1282                        struct cxl_region *cxlr)
1283 {
1284         struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds);
1285         struct cxl_mbox_poison_out *po;
1286         struct cxl_mbox_poison_in pi;
1287         struct cxl_mbox_cmd mbox_cmd;
1288         int nr_records = 0;
1289         int rc;
1290
1291         rc = mutex_lock_interruptible(&mds->poison.lock);
1292         if (rc)
1293                 return rc;
1294
1295         po = mds->poison.list_out;
1296         pi.offset = cpu_to_le64(offset);
1297         pi.length = cpu_to_le64(len / CXL_POISON_LEN_MULT);
1298
1299         mbox_cmd = (struct cxl_mbox_cmd) {
1300                 .opcode = CXL_MBOX_OP_GET_POISON,
1301                 .size_in = sizeof(pi),
1302                 .payload_in = &pi,
1303                 .size_out = mds->payload_size,
1304                 .payload_out = po,
1305                 .min_out = struct_size(po, record, 0),
1306         };
1307
1308         do {
1309                 rc = cxl_internal_send_cmd(mds, &mbox_cmd);
1310                 if (rc)
1311                         break;
1312
1313                 for (int i = 0; i < le16_to_cpu(po->count); i++)
1314                         trace_cxl_poison(cxlmd, cxlr, &po->record[i],
1315                                          po->flags, po->overflow_ts,
1316                                          CXL_POISON_TRACE_LIST);
1317
1318                 /* Protect against an uncleared _FLAG_MORE */
1319                 nr_records = nr_records + le16_to_cpu(po->count);
1320                 if (nr_records >= mds->poison.max_errors) {
1321                         dev_dbg(&cxlmd->dev, "Max Error Records reached: %d\n",
1322                                 nr_records);
1323                         break;
1324                 }
1325         } while (po->flags & CXL_POISON_FLAG_MORE);
1326
1327         mutex_unlock(&mds->poison.lock);
1328         return rc;
1329 }
1330 EXPORT_SYMBOL_NS_GPL(cxl_mem_get_poison, CXL);
1331
1332 static void free_poison_buf(void *buf)
1333 {
1334         kvfree(buf);
1335 }
1336
1337 /* Get Poison List output buffer is protected by mds->poison.lock */
1338 static int cxl_poison_alloc_buf(struct cxl_memdev_state *mds)
1339 {
1340         mds->poison.list_out = kvmalloc(mds->payload_size, GFP_KERNEL);
1341         if (!mds->poison.list_out)
1342                 return -ENOMEM;
1343
1344         return devm_add_action_or_reset(mds->cxlds.dev, free_poison_buf,
1345                                         mds->poison.list_out);
1346 }
1347
1348 int cxl_poison_state_init(struct cxl_memdev_state *mds)
1349 {
1350         int rc;
1351
1352         if (!test_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds))
1353                 return 0;
1354
1355         rc = cxl_poison_alloc_buf(mds);
1356         if (rc) {
1357                 clear_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds);
1358                 return rc;
1359         }
1360
1361         mutex_init(&mds->poison.lock);
1362         return 0;
1363 }
1364 EXPORT_SYMBOL_NS_GPL(cxl_poison_state_init, CXL);
1365
1366 struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev)
1367 {
1368         struct cxl_memdev_state *mds;
1369
1370         mds = devm_kzalloc(dev, sizeof(*mds), GFP_KERNEL);
1371         if (!mds) {
1372                 dev_err(dev, "No memory available\n");
1373                 return ERR_PTR(-ENOMEM);
1374         }
1375
1376         mutex_init(&mds->mbox_mutex);
1377         mutex_init(&mds->event.log_lock);
1378         mds->cxlds.dev = dev;
1379         mds->cxlds.type = CXL_DEVTYPE_CLASSMEM;
1380
1381         return mds;
1382 }
1383 EXPORT_SYMBOL_NS_GPL(cxl_memdev_state_create, CXL);
1384
1385 void __init cxl_mbox_init(void)
1386 {
1387         struct dentry *mbox_debugfs;
1388
1389         mbox_debugfs = cxl_debugfs_create_dir("mbox");
1390         debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs,
1391                             &cxl_raw_allow_all);
1392 }