1 # SPDX-License-Identifier: GPL-2.0
3 tristate "Data acquisition support (comedi)"
5 Enable support for a wide range of data acquisition devices
11 bool "Comedi debugging"
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
16 config COMEDI_DEFAULT_BUF_SIZE_KB
17 int "Comedi default initial asynchronous buffer size in KiB"
20 This is the default asynchronous buffer size which is used for
21 commands running in the background in kernel space. This
22 defaults to 2048 KiB of memory so that a 16 channel card
23 running at 10 kHz has of 2-4 seconds of buffer.
25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
26 int "Comedi default maximum asynchronous buffer size in KiB"
29 This is the default maximum asynchronous buffer size which can
30 be requested by a userspace program without root privileges.
31 This is set to 20480 KiB so that a fast I/O card with 16
32 channels running at 100 kHz has 2-4 seconds of buffer.
34 menuconfig COMEDI_MISC_DRIVERS
35 bool "Comedi misc drivers"
37 Enable comedi misc drivers to be built
39 Note that the answer to this question won't directly affect the
40 kernel: saying N will just cause the configurator to skip all
41 the questions about misc non-hardware comedi drivers.
43 if COMEDI_MISC_DRIVERS
46 tristate "Comedi device bonding support"
47 select COMEDI_KCOMEDILIB
49 Enable support for a driver to 'bond' (merge) multiple subdevices
50 from multiple devices together as one.
52 Currently, it only handles digital I/O subdevices.
54 To compile this driver as a module, choose M here: the module will be
58 tristate "Fake waveform generator support"
60 Enable support for the fake waveform generator.
61 This driver is mainly for testing purposes, but can also be used to
62 generate sample waveforms on systems that don't have data acquisition
65 To compile this driver as a module, choose M here: the module will be
69 tristate "Parallel port support"
72 Enable support for the standard parallel port.
73 A cheap and easy way to get a few more digital I/O lines. Steal
74 additional parallel ports from old computers or your neighbors'
77 To compile this driver as a module, choose M here: the module will be
78 called comedi_parport.
81 tristate "SSV Embedded Systems DIL/Net-PC support"
82 depends on X86_32 || COMPILE_TEST
85 Enable support for SSV Embedded Systems DIL/Net-PC
87 To compile this driver as a module, choose M here: the module will be
90 endif # COMEDI_MISC_DRIVERS
92 menuconfig COMEDI_ISA_DRIVERS
93 bool "Comedi ISA and PC/104 drivers"
96 Enable comedi ISA and PC/104 drivers to be built
98 Note that the answer to this question won't directly affect the
99 kernel: saying N will just cause the configurator to skip all
100 the questions about ISA and PC/104 comedi drivers.
102 if COMEDI_ISA_DRIVERS
105 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
106 depends on HAS_IOPORT
107 depends on COMEDI_8254
109 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
111 To compile this driver as a module, choose M here: the module will be
115 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
118 Enable support for ISA and PC/104 based 8255 digital i/o boards. This
119 driver provides a legacy comedi driver wrapper for the generic 8255
122 Supported boards include:
123 Advantech PCL-724 24 channels
124 Advantech PCL-722 144 (or 96) channels
125 Advantech PCL-731 48 channels
126 ADlink ACL-7122 144 (or 96) channels
127 ADlink ACL-7124 24 channels
128 ADlink PET-48DIO 48 channels
129 WinSystems PCM-IO48 48 channels (PC/104)
130 Diamond Systems ONYX-MM-DIO 48 channels (PC/104)
132 To compile this driver as a module, choose M here: the module will be
136 tristate "Advantech PCL-726 and compatible ISA card support"
138 Enable support for Advantech PCL-726 and compatible ISA cards.
140 To compile this driver as a module, choose M here: the module will be
144 tristate "Simple Digital I/O board support (8-bit ports)"
146 Enable support for various simple ISA or PC/104 Digital I/O boards.
147 These boards all use 8-bit I/O ports.
149 Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
150 ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
151 ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
152 Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
153 Advantech PCL-725 iso - 8 in/8 out
154 ICP P8R8-DIO iso - 8 in/8 out
155 ADlink ACL-7225b iso - 16 in/16 out
156 ICP P16R16-DIO iso - 16 in/16 out
157 Advantech PCL-733 iso - 32 in
158 Advantech PCL-734 iso - 32 out
159 Diamond Systems OPMM-1616-XT iso - 16 in/16 out
160 Diamond Systems PEARL-MM-P iso - 16 out
161 Diamond Systems IR104-PBF iso - 20 in/20 out
163 To compile this driver as a module, choose M here: the module will be
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 depends on HAS_IOPORT
169 select COMEDI_ISADMA if ISA_DMA_API
170 depends on COMEDI_8254
172 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
173 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
174 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
176 To compile this driver as a module, choose M here: the module will be
180 tristate "Advantech PCL-814 and PCL-816 ISA card support"
181 depends on HAS_IOPORT
182 select COMEDI_ISADMA if ISA_DMA_API
183 depends on COMEDI_8254
185 Enable support for Advantech PCL-814 and PCL-816 ISA cards
187 To compile this driver as a module, choose M here: the module will be
191 tristate "Advantech PCL-718 and PCL-818 ISA card support"
192 depends on HAS_IOPORT
193 select COMEDI_ISADMA if ISA_DMA_API
194 depends on COMEDI_8254
196 Enable support for Advantech PCL-818 ISA cards
197 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
199 To compile this driver as a module, choose M here: the module will be
202 config COMEDI_PCM3724
203 tristate "Advantech PCM-3724 PC/104 card support"
206 Enable support for Advantech PCM-3724 PC/104 cards.
208 To compile this driver as a module, choose M here: the module will be
211 config COMEDI_AMPLC_DIO200_ISA
212 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
213 depends on COMEDI_AMPLC_DIO200
215 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
216 PC272E ISA DIO boards
218 To compile this driver as a module, choose M here: the module will be
221 config COMEDI_AMPLC_PC236_ISA
222 tristate "Amplicon PC36AT DIO board support"
223 select COMEDI_AMPLC_PC236
225 Enable support for Amplicon PC36AT ISA DIO board.
227 To compile this driver as a module, choose M here: the module will be
230 config COMEDI_AMPLC_PC263_ISA
231 tristate "Amplicon PC263 relay board support"
233 Enable support for Amplicon PC263 ISA relay board. This board has
234 16 reed relay output channels.
236 To compile this driver as a module, choose M here: the module will be
240 tristate "Analog Devices RTI-800/815 ISA card support"
242 Enable support for Analog Devices RTI-800/815 ISA cards
244 To compile this driver as a module, choose M here: the module will be
248 tristate "Analog Devices RTI-802 ISA card support"
250 Enable support for Analog Devices RTI-802 ISA cards
252 To compile this driver as a module, choose M here: the module will be
256 tristate "Keithley Metrabyte DAC02 compatible ISA card support"
258 Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
260 To compile this driver as a module, choose M here: the module will be
263 config COMEDI_DAS16M1
264 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
265 depends on HAS_IOPORT
266 depends on COMEDI_8254
269 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
271 To compile this driver as a module, choose M here: the module will be
274 config COMEDI_DAS08_ISA
275 tristate "DAS-08 compatible ISA and PC/104 card support"
276 depends on COMEDI_DAS08
278 Enable support for Keithley Metrabyte/ComputerBoards DAS08
279 and compatible ISA and PC/104 cards:
280 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
281 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
282 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
284 To compile this driver as a module, choose M here: the module will be
288 tristate "DAS-16 compatible ISA and PC/104 card support"
289 depends on HAS_IOPORT
290 select COMEDI_ISADMA if ISA_DMA_API
291 depends on COMEDI_8254
294 Enable support for Keithley Metrabyte/ComputerBoards DAS16
295 and compatible ISA and PC/104 cards:
296 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
297 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
298 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
299 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
300 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
301 CIO-DAS1602/16, CIO-DAS16/330
303 To compile this driver as a module, choose M here: the module will be
307 tristate "DAS800 and compatible ISA card support"
308 depends on HAS_IOPORT
309 depends on COMEDI_8254
311 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
312 Keithley Metrabyte DAS-800, DAS-801, DAS-802
313 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
316 To compile this driver as a module, choose M here: the module will be
319 config COMEDI_DAS1800
320 tristate "DAS1800 and compatible ISA card support"
321 depends on HAS_IOPORT
322 select COMEDI_ISADMA if ISA_DMA_API
323 depends on COMEDI_8254
325 Enable support for DAS1800 and compatible ISA cards
326 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
327 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
328 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
329 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
332 To compile this driver as a module, choose M here: the module will be
335 config COMEDI_DAS6402
336 tristate "DAS6402 and compatible ISA card support"
337 depends on HAS_IOPORT
338 depends on COMEDI_8254
340 Enable support for DAS6402 and compatible ISA cards
341 Computerboards, Keithley Metrabyte DAS6402 and compatibles
343 To compile this driver as a module, choose M here: the module will be
347 tristate "Data Translation DT2801 ISA card support"
349 Enable support for Data Translation DT2801 ISA cards
351 To compile this driver as a module, choose M here: the module will be
355 tristate "Data Translation DT2811 ISA card support"
357 Enable support for Data Translation DT2811 ISA cards
359 To compile this driver as a module, choose M here: the module will be
363 tristate "Data Translation DT2814 ISA card support"
365 Enable support for Data Translation DT2814 ISA cards
367 To compile this driver as a module, choose M here: the module will be
371 tristate "Data Translation DT2815 ISA card support"
373 Enable support for Data Translation DT2815 ISA cards
375 To compile this driver as a module, choose M here: the module will be
379 tristate "Data Translation DT2817 ISA card support"
381 Enable support for Data Translation DT2817 ISA cards
383 To compile this driver as a module, choose M here: the module will be
387 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
388 select COMEDI_ISADMA if ISA_DMA_API
390 Enable support for Data Translation DT2821 series including DT-EZ
391 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
392 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
393 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
395 To compile this driver as a module, choose M here: the module will be
398 config COMEDI_DMM32AT
399 tristate "Diamond Systems MM-32-AT PC/104 board support"
402 Enable support for Diamond Systems MM-32-AT PC/104 boards
404 To compile this driver as a module, choose M here: the module will be
408 tristate "FL512 ISA card support"
410 Enable support for FL512 ISA card
412 To compile this driver as a module, choose M here: the module will be
415 config COMEDI_AIO_AIO12_8
416 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
417 depends on HAS_IOPORT
418 depends on COMEDI_8254
421 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
423 To compile this driver as a module, choose M here: the module will be
426 config COMEDI_AIO_IIRO_16
427 tristate "I/O Products PC/104 IIRO16 Board support"
429 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
432 To compile this driver as a module, choose M here: the module will be
435 config COMEDI_II_PCI20KC
436 tristate "Intelligent Instruments PCI-20001C carrier support"
439 Enable support for Intelligent Instruments PCI-20001C carrier
440 PCI-20001, PCI-20006 and PCI-20341
442 To compile this driver as a module, choose M here: the module will be
445 config COMEDI_C6XDIGIO
446 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
448 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
451 To compile this driver as a module, choose M here: the module will be
455 tristate "Micro/sys MPC-624 PC/104 board support"
457 Enable support for Micro/sys MPC-624 PC/104 board
459 To compile this driver as a module, choose M here: the module will be
463 tristate "MicroAxial ADQ12-B data acquisition and control card support"
465 Enable MicroAxial ADQ12-B daq and control card support.
467 To compile this driver as a module, choose M here: the module will be
470 config COMEDI_NI_AT_A2150
471 tristate "NI AT-A2150 ISA card support"
472 depends on HAS_IOPORT
473 select COMEDI_ISADMA if ISA_DMA_API
474 depends on COMEDI_8254
476 Enable support for National Instruments AT-A2150 cards
478 To compile this driver as a module, choose M here: the module will be
481 config COMEDI_NI_AT_AO
482 tristate "NI AT-AO-6/10 EISA card support"
483 depends on HAS_IOPORT
484 depends on COMEDI_8254
486 Enable support for National Instruments AT-AO-6/10 cards
488 To compile this driver as a module, choose M here: the module will be
491 config COMEDI_NI_ATMIO
492 tristate "NI AT-MIO E series ISA-PNP card support"
496 Enable support for National Instruments AT-MIO E series cards
497 National Instruments AT-MIO-16E-1 (ni_atmio),
498 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
499 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
501 To compile this driver as a module, choose M here: the module will be
504 config COMEDI_NI_ATMIO16D
505 tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
508 Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
510 To compile this driver as a module, choose M here: the module will be
513 config COMEDI_NI_LABPC_ISA
514 tristate "NI Lab-PC and compatibles ISA support"
515 depends on COMEDI_NI_LABPC
517 Enable support for National Instruments Lab-PC and compatibles
518 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
519 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
520 not yet been added to the driver.
522 To compile this driver as a module, choose M here: the module will be
526 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
528 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
530 To compile this driver as a module, choose M here: the module will be
533 config COMEDI_PCMDA12
534 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
536 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
537 Note that the board is not ISA-PNP capable and thus needs the I/O
538 port comedi_config parameter.
540 To compile this driver as a module, choose M here: the module will be
544 tristate "Winsystems PCM-MIO PC/104 board support"
546 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
548 To compile this driver as a module, choose M here: the module will be
552 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
554 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
556 To compile this driver as a module, choose M here: the module will be
559 config COMEDI_MULTIQ3
560 tristate "Quanser Consulting MultiQ-3 ISA card support"
562 Enable support for Quanser Consulting MultiQ-3 ISA cards
564 To compile this driver as a module, choose M here: the module will be
568 tristate "Sensoray s526 support"
570 Enable support for Sensoray s526
572 To compile this driver as a module, choose M here: the module will be
575 endif # COMEDI_ISA_DRIVERS
577 menuconfig COMEDI_PCI_DRIVERS
578 tristate "Comedi PCI drivers"
579 depends on PCI && HAS_IOPORT
581 Enable support for comedi PCI drivers.
583 To compile this support as a module, choose M here: the module will
584 be called comedi_pci.
586 if COMEDI_PCI_DRIVERS
588 config COMEDI_8255_PCI
589 tristate "Generic PCI based 8255 digital i/o board support"
592 Enable support for PCI based 8255 digital i/o boards. This driver
593 provides a PCI wrapper around the generic 8255 driver.
596 ADlink - PCI-7224, PCI-7248, and PCI-7296
597 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
599 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
600 PCI-6503B, PCI-6503X, and PXI-6503
602 To compile this driver as a module, choose M here: the module will
605 config COMEDI_ADDI_WATCHDOG
608 Provides support for the watchdog subdevice found on many ADDI-DATA
609 boards. This module will be automatically selected when needed. The
610 module will be called addi_watchdog.
612 config COMEDI_ADDI_APCI_1032
613 tristate "ADDI-DATA APCI_1032 support"
615 Enable support for ADDI-DATA APCI_1032 cards
617 To compile this driver as a module, choose M here: the module will be
618 called addi_apci_1032.
620 config COMEDI_ADDI_APCI_1500
621 tristate "ADDI-DATA APCI_1500 support"
623 Enable support for ADDI-DATA APCI_1500 cards
625 To compile this driver as a module, choose M here: the module will be
626 called addi_apci_1500.
628 config COMEDI_ADDI_APCI_1516
629 tristate "ADDI-DATA APCI-1016/1516/2016 support"
630 select COMEDI_ADDI_WATCHDOG
632 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
633 These are 16 channel, optically isolated, digital I/O boards. The 1516
634 and 2016 boards also have a watchdog for resetting the outputs to "0".
636 To compile this driver as a module, choose M here: the module will be
637 called addi_apci_1516.
639 config COMEDI_ADDI_APCI_1564
640 tristate "ADDI-DATA APCI_1564 support"
641 select COMEDI_ADDI_WATCHDOG
643 Enable support for ADDI-DATA APCI_1564 cards
645 To compile this driver as a module, choose M here: the module will be
646 called addi_apci_1564.
648 config COMEDI_ADDI_APCI_16XX
649 tristate "ADDI-DATA APCI_16xx support"
651 Enable support for ADDI-DATA APCI_16xx cards
653 To compile this driver as a module, choose M here: the module will be
654 called addi_apci_16xx.
656 config COMEDI_ADDI_APCI_2032
657 tristate "ADDI-DATA APCI_2032 support"
658 select COMEDI_ADDI_WATCHDOG
660 Enable support for ADDI-DATA APCI_2032 cards
662 To compile this driver as a module, choose M here: the module will be
663 called addi_apci_2032.
665 config COMEDI_ADDI_APCI_2200
666 tristate "ADDI-DATA APCI_2200 support"
667 select COMEDI_ADDI_WATCHDOG
669 Enable support for ADDI-DATA APCI_2200 cards
671 To compile this driver as a module, choose M here: the module will be
672 called addi_apci_2200.
674 config COMEDI_ADDI_APCI_3120
675 tristate "ADDI-DATA APCI_3120/3001 support"
678 Enable support for ADDI-DATA APCI_3120/3001 cards
680 To compile this driver as a module, choose M here: the module will be
681 called addi_apci_3120.
683 config COMEDI_ADDI_APCI_3501
684 tristate "ADDI-DATA APCI_3501 support"
686 Enable support for ADDI-DATA APCI_3501 cards
688 To compile this driver as a module, choose M here: the module will be
689 called addi_apci_3501.
691 config COMEDI_ADDI_APCI_3XXX
692 tristate "ADDI-DATA APCI_3xxx support"
694 Enable support for ADDI-DATA APCI_3xxx cards
696 To compile this driver as a module, choose M here: the module will be
697 called addi_apci_3xxx.
699 config COMEDI_ADL_PCI6208
700 tristate "ADLink PCI-6208A support"
702 Enable support for ADLink PCI-6208A cards
704 To compile this driver as a module, choose M here: the module will be
707 config COMEDI_ADL_PCI7X3X
708 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
710 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
711 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
712 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
713 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
715 To compile this driver as a module, choose M here: the module will be
718 config COMEDI_ADL_PCI8164
719 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
721 Enable support for ADlink PCI-8164 4 Axes Motion Control board
723 To compile this driver as a module, choose M here: the module will be
726 config COMEDI_ADL_PCI9111
727 tristate "ADLink PCI-9111HR support"
728 depends on HAS_IOPORT
729 depends on COMEDI_8254
731 Enable support for ADlink PCI9111 cards
733 To compile this driver as a module, choose M here: the module will be
736 config COMEDI_ADL_PCI9118
737 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
739 depends on COMEDI_8254
741 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
743 To compile this driver as a module, choose M here: the module will be
746 config COMEDI_ADV_PCI1710
747 tristate "Advantech PCI-171x and PCI-1731 support"
748 depends on HAS_IOPORT
749 depends on COMEDI_8254
751 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
752 PCI-1713 and PCI-1731
754 To compile this driver as a module, choose M here: the module will be
757 config COMEDI_ADV_PCI1720
758 tristate "Advantech PCI-1720 support"
760 Enable support for Advantech PCI-1720 Analog Output board.
762 To compile this driver as a module, choose M here: the module will be
765 config COMEDI_ADV_PCI1723
766 tristate "Advantech PCI-1723 support"
768 Enable support for Advantech PCI-1723 cards
770 To compile this driver as a module, choose M here: the module will be
773 config COMEDI_ADV_PCI1724
774 tristate "Advantech PCI-1724U support"
776 Enable support for Advantech PCI-1724U cards. These are 32-channel
777 analog output cards with voltage and current loop output ranges and
780 To compile this driver as a module, choose M here: the module will be
783 config COMEDI_ADV_PCI1760
784 tristate "Advantech PCI-1760 support"
786 Enable support for Advantech PCI-1760 board.
788 To compile this driver as a module, choose M here: the module will be
791 config COMEDI_ADV_PCI_DIO
792 tristate "Advantech PCI DIO card support"
793 depends on HAS_IOPORT
794 depends on COMEDI_8254
797 Enable support for Advantech PCI DIO cards
798 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
799 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
800 PCI-1761 and PCI-1762
802 To compile this driver as a module, choose M here: the module will be
805 config COMEDI_AMPLC_DIO200_PCI
806 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
807 depends on COMEDI_AMPLC_DIO200
809 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
810 and PCIe296 DIO boards.
812 To compile this driver as a module, choose M here: the module will be
813 called amplc_dio200_pci.
815 config COMEDI_AMPLC_PC236_PCI
816 tristate "Amplicon PCI236 DIO board support"
817 select COMEDI_AMPLC_PC236
819 Enable support for Amplicon PCI236 DIO board.
821 To compile this driver as a module, choose M here: the module will be
824 config COMEDI_AMPLC_PC263_PCI
825 tristate "Amplicon PCI263 relay board support"
827 Enable support for Amplicon PCI263 relay board. This is a PCI board
828 with 16 reed relay output channels.
830 To compile this driver as a module, choose M here: the module will be
833 config COMEDI_AMPLC_PCI224
834 tristate "Amplicon PCI224 and PCI234 support"
835 depends on HAS_IOPORT
836 depends on COMEDI_8254
838 Enable support for Amplicon PCI224 and PCI234 AO boards
840 To compile this driver as a module, choose M here: the module will be
843 config COMEDI_AMPLC_PCI230
844 tristate "Amplicon PCI230 and PCI260 support"
845 depends on HAS_IOPORT
846 depends on COMEDI_8254
849 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
852 To compile this driver as a module, choose M here: the module will be
855 config COMEDI_CONTEC_PCI_DIO
856 tristate "Contec PIO1616L digital I/O board support"
858 Enable support for the Contec PIO1616L digital I/O board
860 To compile this driver as a module, choose M here: the module will be
861 called contec_pci_dio.
863 config COMEDI_DAS08_PCI
864 tristate "DAS-08 PCI support"
865 depends on COMEDI_DAS08
867 Enable support for PCI DAS-08 cards.
869 To compile this driver as a module, choose M here: the module will be
873 tristate "Data Translation DT3000 series support"
875 Enable support for Data Translation DT3000 series
876 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
879 To compile this driver as a module, choose M here: the module will be
882 config COMEDI_DYNA_PCI10XX
883 tristate "Dynalog PCI DAQ series support"
885 Enable support for Dynalog PCI DAQ series
888 To compile this driver as a module, choose M here: the module will be
891 config COMEDI_GSC_HPDI
892 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
894 Enable support for General Standards Corporation high speed parallel
895 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
896 Only receive mode works, transmit not supported.
898 To compile this driver as a module, choose M here: the module will be
902 tristate "Humusoft MF634 and MF624 DAQ Card support"
904 This driver supports both Humusoft MF634 and MF624 Data acquisition
905 cards. The legacy Humusoft MF614 card is not supported.
907 config COMEDI_ICP_MULTI
908 tristate "Inova ICP_MULTI support"
910 Enable support for Inova ICP_MULTI card
912 To compile this driver as a module, choose M here: the module will be
915 config COMEDI_DAQBOARD2000
916 tristate "IOtech DAQboard/2000 support"
919 Enable support for the IOtech DAQboard/2000
921 To compile this driver as a module, choose M here: the module will be
924 config COMEDI_JR3_PCI
925 tristate "JR3/PCI force sensor board support"
927 Enable support for JR3/PCI force sensor boards
929 To compile this driver as a module, choose M here: the module will be
932 config COMEDI_KE_COUNTER
933 tristate "Kolter-Electronic PCI Counter 1 card support"
935 Enable support for Kolter-Electronic PCI Counter 1 cards
937 To compile this driver as a module, choose M here: the module will be
940 config COMEDI_CB_PCIDAS64
941 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
944 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
945 60xx, and 4020 series with the PLX 9080 PCI controller
947 To compile this driver as a module, choose M here: the module will be
950 config COMEDI_CB_PCIDAS
951 tristate "MeasurementComputing PCI-DAS support"
952 depends on HAS_IOPORT
953 depends on COMEDI_8254
956 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
957 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
958 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
961 To compile this driver as a module, choose M here: the module will be
964 config COMEDI_CB_PCIDDA
965 tristate "MeasurementComputing PCI-DDA series support"
968 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
969 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
970 PCI-DDA04/16 and PCI-DDA02/16
972 To compile this driver as a module, choose M here: the module will be
975 config COMEDI_CB_PCIMDAS
976 tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
977 depends on HAS_IOPORT
978 depends on COMEDI_8254
981 Enable support for ComputerBoards/MeasurementComputing PCI Migration
982 series PCIM-DAS1602/16 and PCIe-DAS1602/16.
984 To compile this driver as a module, choose M here: the module will be
987 config COMEDI_CB_PCIMDDA
988 tristate "MeasurementComputing PCIM-DDA06-16 support"
991 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
993 To compile this driver as a module, choose M here: the module will be
997 tristate "Meilhaus ME-4000 support"
998 depends on HAS_IOPORT
999 depends on COMEDI_8254
1001 Enable support for Meilhaus PCI data acquisition cards
1002 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
1004 To compile this driver as a module, choose M here: the module will be
1007 config COMEDI_ME_DAQ
1008 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
1010 Enable support for Meilhaus PCI data acquisition cards
1011 ME-2000i, ME-2600i and ME-3000vm1
1013 To compile this driver as a module, choose M here: the module will be
1016 config COMEDI_NI_6527
1017 tristate "NI 6527 support"
1019 Enable support for the National Instruments 6527 PCI card
1021 To compile this driver as a module, choose M here: the module will be
1024 config COMEDI_NI_65XX
1025 tristate "NI 65xx static dio PCI card support"
1027 Enable support for National Instruments 65xx static dio boards.
1028 Supported devices: National Instruments PCI-6509 (ni_65xx),
1029 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1030 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1031 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1033 To compile this driver as a module, choose M here: the module will be
1036 config COMEDI_NI_660X
1037 tristate "NI 660x counter/timer PCI card support"
1039 select COMEDI_NI_TIOCMD
1041 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1042 PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1044 To compile this driver as a module, choose M here: the module will be
1047 config COMEDI_NI_670X
1048 tristate "NI 670x PCI card support"
1050 Enable support for National Instruments PCI-6703 and PCI-6704
1052 To compile this driver as a module, choose M here: the module will be
1055 config COMEDI_NI_LABPC_PCI
1056 tristate "NI Lab-PC PCI-1200 support"
1057 depends on COMEDI_NI_LABPC
1059 Enable support for National Instruments Lab-PC PCI-1200.
1061 To compile this driver as a module, choose M here: the module will be
1062 called ni_labpc_pci.
1064 config COMEDI_NI_PCIDIO
1065 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1070 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1071 PCI-6533 and PCI-6534
1073 To compile this driver as a module, choose M here: the module will be
1076 config COMEDI_NI_PCIMIO
1077 tristate "NI PCI-MIO-E series and M series support"
1079 depends on HAS_IOPORT
1080 select COMEDI_NI_TIOCMD
1083 Enable support for National Instruments PCI-MIO-E series and M series
1084 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1085 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1086 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1087 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1088 PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1089 PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1090 PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1091 PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1092 PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1093 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1094 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1096 To compile this driver as a module, choose M here: the module will be
1099 config COMEDI_RTD520
1100 tristate "Real Time Devices PCI4520/DM7520 support"
1101 depends on HAS_IOPORT
1102 depends on COMEDI_8254
1104 Enable support for Real Time Devices PCI4520/DM7520
1106 To compile this driver as a module, choose M here: the module will be
1110 tristate "Sensoray 626 support"
1112 Enable support for Sensoray 626
1114 To compile this driver as a module, choose M here: the module will be
1121 config COMEDI_NI_TIOCMD
1124 select COMEDI_NI_TIO
1127 endif # COMEDI_PCI_DRIVERS
1129 menuconfig COMEDI_PCMCIA_DRIVERS
1130 tristate "Comedi PCMCIA drivers"
1133 Enable support for comedi PCMCIA drivers.
1135 To compile this support as a module, choose M here: the module will
1136 be called comedi_pcmcia.
1138 if COMEDI_PCMCIA_DRIVERS
1140 config COMEDI_CB_DAS16_CS
1141 tristate "CB DAS16 series PCMCIA support"
1142 depends on HAS_IOPORT
1143 depends on COMEDI_8254
1145 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1146 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1148 To compile this driver as a module, choose M here: the module will be
1151 config COMEDI_DAS08_CS
1152 tristate "CB DAS08 PCMCIA support"
1153 depends on COMEDI_DAS08
1155 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1158 To compile this driver as a module, choose M here: the module will be
1161 config COMEDI_NI_DAQ_700_CS
1162 tristate "NI DAQCard-700 PCMCIA support"
1163 depends on HAS_IOPORT
1165 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1167 To compile this driver as a module, choose M here: the module will be
1170 config COMEDI_NI_DAQ_DIO24_CS
1171 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1172 depends on HAS_IOPORT
1175 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1177 To compile this driver as a module, choose M here: the module will be
1178 called ni_daq_dio24.
1180 config COMEDI_NI_LABPC_CS
1181 tristate "NI DAQCard-1200 PCMCIA support"
1182 depends on COMEDI_NI_LABPC
1184 Enable support for the National Instruments PCMCIA DAQCard-1200
1186 To compile this driver as a module, choose M here: the module will be
1189 config COMEDI_NI_MIO_CS
1190 tristate "NI DAQCard E series PCMCIA support"
1191 depends on HAS_IOPORT
1192 select COMEDI_NI_TIO
1195 Enable support for the National Instruments PCMCIA DAQCard E series
1196 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1199 To compile this driver as a module, choose M here: the module will be
1202 config COMEDI_QUATECH_DAQP_CS
1203 tristate "Quatech DAQP PCMCIA data capture card support"
1204 depends on HAS_IOPORT
1206 Enable support for the Quatech DAQP PCMCIA data capture cards
1207 DAQP-208 and DAQP-308
1209 To compile this driver as a module, choose M here: the module will be
1210 called quatech_daqp_cs.
1212 endif # COMEDI_PCMCIA_DRIVERS
1214 menuconfig COMEDI_USB_DRIVERS
1215 tristate "Comedi USB drivers"
1218 Enable support for comedi USB drivers.
1220 To compile this support as a module, choose M here: the module will
1221 be called comedi_usb.
1223 if COMEDI_USB_DRIVERS
1225 config COMEDI_DT9812
1226 tristate "DataTranslation DT9812 USB module support"
1228 Enable support for the Data Translation DT9812 USB module
1230 To compile this driver as a module, choose M here: the module will be
1233 config COMEDI_NI_USB6501
1234 tristate "NI USB-6501 support"
1236 Enable support for the National Instruments USB-6501 module.
1238 The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1239 provides 24 digital I/O lines channels and one 32-bit counter.
1241 To compile this driver as a module, choose M here: the module will be
1244 config COMEDI_USBDUX
1245 tristate "ITL USB-DUX-D support"
1247 Enable support for the Incite Technology Ltd USB-DUX-D Board
1249 To compile this driver as a module, choose M here: the module will be
1252 config COMEDI_USBDUXFAST
1253 tristate "ITL USB-DUXfast support"
1255 Enable support for the Incite Technology Ltd USB-DUXfast Board
1257 To compile this driver as a module, choose M here: the module will be
1260 config COMEDI_USBDUXSIGMA
1261 tristate "ITL USB-DUXsigma support"
1263 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1265 To compile this driver as a module, choose M here: the module will be
1268 config COMEDI_VMK80XX
1269 tristate "Velleman VM110/VM140 USB Board support"
1271 Build the Velleman USB Board Low-Level Driver supporting the
1272 K8055/K8061 aka VM110/VM140 devices
1274 To compile this driver as a module, choose M here: the module will be
1277 endif # COMEDI_USB_DRIVERS
1281 depends on HAS_IOPORT
1286 config COMEDI_8255_SA
1287 tristate "Standalone 8255 support"
1288 depends on HAS_IOPORT
1291 Enable support for 8255 digital I/O as a standalone driver.
1293 You should enable compilation this driver if you plan to use a board
1294 that has an 8255 chip at a known I/O base address and there are no
1295 other Comedi drivers for the board.
1297 Note that Comedi drivers for most multi-function boards incorporating
1298 an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255
1299 boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1302 To compile this driver as a module, choose M here: the module will be
1305 config COMEDI_KCOMEDILIB
1306 tristate "Comedi kcomedilib"
1308 Build the kcomedilib.
1310 This is a kernel module used to open and manipulate Comedi devices
1311 from within kernel code. It is currently only used by the
1312 comedi_bond driver, and its functionality has been stripped down to
1313 the needs of that driver, so is currently not very useful for
1316 To compile kcomedilib as a module, choose M here: the module will be
1319 config COMEDI_AMPLC_DIO200
1320 depends on COMEDI_8254
1323 config COMEDI_AMPLC_PC236
1329 depends on COMEDI_8254
1332 config COMEDI_ISADMA
1335 config COMEDI_NI_LABPC
1337 depends on HAS_IOPORT
1338 depends on COMEDI_8254
1341 config COMEDI_NI_LABPC_ISADMA
1343 default COMEDI_NI_LABPC
1344 depends on COMEDI_NI_LABPC_ISA != n
1345 depends on ISA_DMA_API
1346 select COMEDI_ISADMA
1348 config COMEDI_NI_TIO
1350 select COMEDI_NI_ROUTING
1352 config COMEDI_NI_ROUTING
1356 tristate "Comedi unit tests"
1358 Enable comedi unit-test modules to be built.
1360 Note that the answer to this question won't directly affect the
1361 kernel: saying N will just cause the configurator to skip all
1362 the questions about comedi unit-test modules.
1366 config COMEDI_TESTS_EXAMPLE
1367 tristate "Comedi example unit-test module"
1369 Enable support for an example unit-test module. This is just a
1370 silly example to be used as a basis for writing other unit-test
1373 To compile this as a module, choose M here: the module will be called
1374 comedi_example_test.
1376 config COMEDI_TESTS_NI_ROUTES
1377 tristate "NI routing unit-test module"
1378 select COMEDI_NI_ROUTING
1380 Enable support for a unit-test module to test the signal routing
1381 code used by comedi drivers for various National Instruments cards.
1383 To compile this as a module, choose M here: the module will be called
1386 endif # COMEDI_TESTS