2 * mtip32xx.h - Header file for the P320 SSD Block Driver
3 * Copyright (C) 2011 Micron Technology, Inc.
5 * Portions of this code were derived from works subjected to the
7 * Copyright (C) 2009 Integrated Device Technology, Inc.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 #ifndef __MTIP32XX_H__
22 #define __MTIP32XX_H__
24 #include <linux/spinlock.h>
25 #include <linux/rwsem.h>
26 #include <linux/ata.h>
27 #include <linux/interrupt.h>
28 #include <linux/genhd.h>
29 #include <linux/version.h>
31 /* Offset of Subsystem Device ID in pci confoguration space */
32 #define PCI_SUBSYSTEM_DEVICEID 0x2E
34 /* offset of Device Control register in PCIe extended capabilites space */
35 #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
37 /* # of times to retry timed out/failed IOs */
38 #define MTIP_MAX_RETRIES 2
40 /* Various timeout values in ms */
41 #define MTIP_NCQ_COMMAND_TIMEOUT_MS 5000
42 #define MTIP_IOCTL_COMMAND_TIMEOUT_MS 5000
43 #define MTIP_INTERNAL_COMMAND_TIMEOUT_MS 5000
45 /* check for timeouts every 500ms */
46 #define MTIP_TIMEOUT_CHECK_PERIOD 500
49 #define MTIP_FTL_REBUILD_OFFSET 142
50 #define MTIP_FTL_REBUILD_MAGIC 0xED51
51 #define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000
53 /* Macro to extract the tag bit number from a tag value. */
54 #define MTIP_TAG_BIT(tag) (tag & 0x1F)
57 * Macro to extract the tag index from a tag value. The index
58 * is used to access the correct s_active/Command Issue register based
61 #define MTIP_TAG_INDEX(tag) (tag >> 5)
64 * Maximum number of scatter gather entries
65 * a single command may have.
67 #define MTIP_MAX_SG 128
70 * Maximum number of slot groups (Command Issue & s_active registers)
71 * NOTE: This is the driver maximum; check dd->slot_groups for actual value.
73 #define MTIP_MAX_SLOT_GROUPS 8
75 /* Internal command tag. */
76 #define MTIP_TAG_INTERNAL 0
78 /* Micron Vendor ID & P320x SSD Device ID */
79 #define PCI_VENDOR_ID_MICRON 0x1344
80 #define P320_DEVICE_ID 0x5150
82 /* Driver name and version strings */
83 #define MTIP_DRV_NAME "mtip32xx"
84 #define MTIP_DRV_VERSION "1.2.6os3"
86 /* Maximum number of minor device numbers per device. */
87 #define MTIP_MAX_MINORS 16
89 /* Maximum number of supported command slots. */
90 #define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32)
93 * Per-tag bitfield size in longs.
94 * Linux bit manipulation functions
95 * (i.e. test_and_set_bit, find_next_zero_bit)
96 * manipulate memory in longs, so we try to make the math work.
97 * take the slot groups and find the number of longs, rounding up.
98 * Careful! i386 and x86_64 use different size longs!
100 #define U32_PER_LONG (sizeof(long) / sizeof(u32))
101 #define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \
102 (U32_PER_LONG-1))/U32_PER_LONG)
104 /* BAR number used to access the HBA registers. */
108 #define dbg_printk(format, arg...) \
109 printk(pr_fmt(format), ##arg);
111 #define dbg_printk(format, arg...)
114 #define __force_bit2int (unsigned int __force)
117 /* below are bit numbers in 'flags' defined in mtip_port */
118 MTIP_PF_IC_ACTIVE_BIT = 0, /* pio/ioctl */
119 MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */
120 MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */
121 MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */
122 MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | \
123 (1 << MTIP_PF_EH_ACTIVE_BIT) | \
124 (1 << MTIP_PF_SE_ACTIVE_BIT) | \
125 (1 << MTIP_PF_DM_ACTIVE_BIT)),
127 MTIP_PF_SVC_THD_ACTIVE_BIT = 4,
128 MTIP_PF_ISSUE_CMDS_BIT = 5,
129 MTIP_PF_REBUILD_BIT = 6,
130 MTIP_PF_SVC_THD_STOP_BIT = 8,
132 /* below are bit numbers in 'dd_flag' defined in driver_data */
133 MTIP_DDF_REMOVE_PENDING_BIT = 1,
134 MTIP_DDF_OVER_TEMP_BIT = 2,
135 MTIP_DDF_WRITE_PROTECT_BIT = 3,
136 MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \
137 (1 << MTIP_DDF_OVER_TEMP_BIT) | \
138 (1 << MTIP_DDF_WRITE_PROTECT_BIT)),
140 MTIP_DDF_CLEANUP_BIT = 5,
141 MTIP_DDF_RESUME_BIT = 6,
142 MTIP_DDF_INIT_DONE_BIT = 7,
143 MTIP_DDF_REBUILD_FAILED_BIT = 8,
146 __packed struct smart_attr{
155 /* Register Frame Information Structure (FIS), host to device. */
156 struct host_to_dev_fis {
159 * - 27h Register FIS, host to device.
160 * - 34h Register FIS, device to host.
161 * - 39h DMA Activate FIS, device to host.
162 * - 41h DMA Setup FIS, bi-directional.
163 * - 46h Data FIS, bi-directional.
164 * - 58h BIST Activate FIS, bi-directional.
165 * - 5Fh PIO Setup FIS, device to host.
166 * - A1h Set Device Bits FIS, device to host.
170 unsigned char command;
171 unsigned char features;
174 unsigned char lba_low;
175 unsigned char sector;
178 unsigned char lba_mid;
179 unsigned char cyl_low;
182 unsigned char lba_hi;
183 unsigned char cyl_hi;
186 unsigned char device;
191 unsigned char lba_low_ex;
192 unsigned char sector_ex;
195 unsigned char lba_mid_ex;
196 unsigned char cyl_low_ex;
199 unsigned char lba_hi_ex;
200 unsigned char cyl_hi_ex;
202 unsigned char features_ex;
204 unsigned char sect_count;
205 unsigned char sect_cnt_ex;
207 unsigned char control;
212 /* Command header structure. */
213 struct mtip_cmd_hdr {
216 * - Bits 31:16 Number of PRD entries.
217 * - Bits 15:8 Unused in this implementation.
218 * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries.
219 * - Bit 6 Write bit, should be set when writing data to the device.
220 * - Bit 5 Unused in this implementation.
221 * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes).
224 /* This field is unsed when using NCQ. */
226 unsigned int byte_count;
230 * Lower 32 bits of the command table address associated with this
231 * header. The command table addresses must be 128 byte aligned.
235 * If 64 bit addressing is used this field is the upper 32 bits
236 * of the command table address associated with this command.
239 /* Reserved and unused. */
243 /* Command scatter gather structure (PRD). */
246 * Low 32 bits of the data buffer address. For P320 this
247 * address must be 8 byte aligned signified by bits 2:0 being
252 * When 64 bit addressing is used this field is the upper
253 * 32 bits of the data buffer address.
255 unsigned int dba_upper;
257 unsigned int reserved;
259 * Bit 31: interrupt when this data block has been transferred.
260 * Bits 30..22: reserved
261 * Bits 21..0: byte count (minus 1). For P320 the byte count must be
262 * 8 byte aligned signified by bits 2:0 being set to 1.
268 /* Structure used to describe a command. */
271 struct mtip_cmd_hdr *command_header; /* ptr to command header entry */
273 dma_addr_t command_header_dma; /* corresponding physical address */
275 void *command; /* ptr to command table entry */
277 dma_addr_t command_dma; /* corresponding physical address */
279 void *comp_data; /* data passed to completion function comp_func() */
281 * Completion function called by the ISR upon completion of
284 void (*comp_func)(struct mtip_port *port,
288 /* Additional callback function that may be called by comp_func() */
289 void (*async_callback)(void *data, int status);
291 void *async_data; /* Addl. data passed to async_callback() */
293 int scatter_ents; /* Number of scatter list entries used */
295 struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */
297 int retries; /* The number of retries left for this command. */
299 int direction; /* Data transfer direction */
301 unsigned long comp_time; /* command completion time, in jiffies */
303 atomic_t active; /* declares if this command sent to the drive. */
306 /* Structure used to describe a port. */
308 /* Pointer back to the driver data for this port. */
309 struct driver_data *dd;
311 * Used to determine if the data pointed to by the
312 * identify field is valid.
314 unsigned long identify_valid;
315 /* Base address of the memory mapped IO for the port. */
317 /* Array of pointers to the memory mapped s_active registers. */
318 void __iomem *s_active[MTIP_MAX_SLOT_GROUPS];
319 /* Array of pointers to the memory mapped completed registers. */
320 void __iomem *completed[MTIP_MAX_SLOT_GROUPS];
321 /* Array of pointers to the memory mapped Command Issue registers. */
322 void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS];
324 * Pointer to the beginning of the command header memory as used
329 * Pointer to the beginning of the command header memory as used
332 dma_addr_t command_list_dma;
334 * Pointer to the beginning of the RX FIS memory as used
339 * Pointer to the beginning of the RX FIS memory as used
342 dma_addr_t rxfis_dma;
344 * Pointer to the beginning of the command table memory as used
349 * Pointer to the beginning of the command table memory as used
352 dma_addr_t command_tbl_dma;
354 * Pointer to the beginning of the identify data memory as used
359 * Pointer to the beginning of the identify data memory as used
362 dma_addr_t identify_dma;
364 * Pointer to the beginning of a sector buffer that is used
365 * by the driver when issuing internal commands.
369 * Pointer to the beginning of a sector buffer that is used
370 * by the DMA when the driver issues internal commands.
372 dma_addr_t sector_buffer_dma;
374 * Bit significant, used to determine if a command slot has
375 * been allocated. i.e. the slot is in use. Bits are cleared
376 * when the command slot and all associated data structures
377 * are no longer needed.
380 dma_addr_t log_buf_dma;
383 dma_addr_t smart_buf_dma;
385 unsigned long allocated[SLOTBITS_IN_LONGS];
387 * used to queue commands when an internal command is in progress
388 * or error handling is active
390 unsigned long cmds_to_issue[SLOTBITS_IN_LONGS];
392 * Array of command slots. Structure includes pointers to the
393 * command header and command table, and completion function and data
396 struct mtip_cmd commands[MTIP_MAX_COMMAND_SLOTS];
397 /* Used by mtip_service_thread to wait for an event */
398 wait_queue_head_t svc_wait;
400 * indicates the state of the port. Also, helps the service thread
401 * to determine its action on wake up.
405 * Timer used to complete commands that have been active for too long.
407 struct timer_list cmd_timer;
408 unsigned long ic_pause_timer;
410 * Semaphore used to block threads if there are no
411 * command slots available.
413 struct semaphore cmd_slot;
414 /* Spinlock for working around command-issue bug. */
415 spinlock_t cmd_issue_lock;
419 * Driver private data structure.
421 * One structure is allocated per probed device.
424 void __iomem *mmio; /* Base address of the HBA registers. */
426 int major; /* Major device number. */
428 int instance; /* Instance number. First device probed is 0, ... */
430 struct gendisk *disk; /* Pointer to our gendisk structure. */
432 struct pci_dev *pdev; /* Pointer to the PCI device structure. */
434 struct request_queue *queue; /* Our request queue. */
436 struct mtip_port *port; /* Pointer to the port data structure. */
438 /* Tasklet used to process the bottom half of the ISR. */
439 struct tasklet_struct tasklet;
441 unsigned product_type; /* magic value declaring the product type */
443 unsigned slot_groups; /* number of slot groups the product supports */
445 unsigned long index; /* Index to determine the disk name */
447 unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
449 struct task_struct *mtip_svc_handler; /* task_struct of svc thd */