drivers/acpi/acpica/nsrepair2.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nsrepair2 - Repair for objects returned by specific
   4  *                          predefined methods
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2013, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acnamesp.h"
  48
  49 #define _COMPONENT          ACPI_NAMESPACE
  50 ACPI_MODULE_NAME("nsrepair2")
  51
  52 /*
  53  * Information structure and handler for ACPI predefined names that can
  54  * be repaired on a per-name basis.
  55  */
  56 typedef
  57 acpi_status(*acpi_repair_function) (struct acpi_predefined_data *data,
  58                                     union acpi_operand_object
  59                                     **return_object_ptr);
  60
  61 typedef struct acpi_repair_info {
  62         char name[ACPI_NAME_SIZE];
  63         acpi_repair_function repair_function;
  64
  65 } acpi_repair_info;
  66
  67 /* Local prototypes */
  68
  69 static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct
  70                                                                    acpi_namespace_node
  71                                                                    *node);
  72
  73 static acpi_status
  74 acpi_ns_repair_ALR(struct acpi_predefined_data *data,
  75                    union acpi_operand_object **return_object_ptr);
  76
  77 static acpi_status
  78 acpi_ns_repair_CID(struct acpi_predefined_data *data,
  79                    union acpi_operand_object **return_object_ptr);
  80
  81 static acpi_status
  82 acpi_ns_repair_FDE(struct acpi_predefined_data *data,
  83                    union acpi_operand_object **return_object_ptr);
  84
  85 static acpi_status
  86 acpi_ns_repair_HID(struct acpi_predefined_data *data,
  87                    union acpi_operand_object **return_object_ptr);
  88
  89 static acpi_status
  90 acpi_ns_repair_PSS(struct acpi_predefined_data *data,
  91                    union acpi_operand_object **return_object_ptr);
  92
  93 static acpi_status
  94 acpi_ns_repair_TSS(struct acpi_predefined_data *data,
  95                    union acpi_operand_object **return_object_ptr);
  96
  97 static acpi_status
  98 acpi_ns_check_sorted_list(struct acpi_predefined_data *data,
  99                           union acpi_operand_object *return_object,
 100                           u32 expected_count,
 101                           u32 sort_index,
 102                           u8 sort_direction, char *sort_key_name);
 103
 104 static void
 105 acpi_ns_sort_list(union acpi_operand_object **elements,
 106                   u32 count, u32 index, u8 sort_direction);
 107
 108 /* Values for sort_direction above */
 109
 110 #define ACPI_SORT_ASCENDING     0
 111 #define ACPI_SORT_DESCENDING    1
 112
 113 /*
 114  * This table contains the names of the predefined methods for which we can
 115  * perform more complex repairs.
 116  *
 117  * As necessary:
 118  *
 119  * _ALR: Sort the list ascending by ambient_illuminance
 120  * _CID: Strings: uppercase all, remove any leading asterisk
 121  * _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs
 122  * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs
 123  * _HID: Strings: uppercase all, remove any leading asterisk
 124  * _PSS: Sort the list descending by Power
 125  * _TSS: Sort the list descending by Power
 126  *
 127  * Names that must be packages, but cannot be sorted:
 128  *
 129  * _BCL: Values are tied to the Package index where they appear, and cannot
 130  * be moved or sorted. These index values are used for _BQC and _BCM.
 131  * However, we can fix the case where a buffer is returned, by converting
 132  * it to a Package of integers.
 133  */
 134 static const struct acpi_repair_info acpi_ns_repairable_names[] = {
 135         {"_ALR", acpi_ns_repair_ALR},
 136         {"_CID", acpi_ns_repair_CID},
 137         {"_FDE", acpi_ns_repair_FDE},
 138         {"_GTM", acpi_ns_repair_FDE},   /* _GTM has same repair as _FDE */
 139         {"_HID", acpi_ns_repair_HID},
 140         {"_PSS", acpi_ns_repair_PSS},
 141         {"_TSS", acpi_ns_repair_TSS},
 142         {{0, 0, 0, 0}, NULL}    /* Table terminator */
 143 };
 144
 145 #define ACPI_FDE_FIELD_COUNT        5
 146 #define ACPI_FDE_BYTE_BUFFER_SIZE   5
 147 #define ACPI_FDE_DWORD_BUFFER_SIZE  (ACPI_FDE_FIELD_COUNT * sizeof (u32))
 148
 149 /******************************************************************************
 150  *
 151  * FUNCTION:    acpi_ns_complex_repairs
 152  *
 153  * PARAMETERS:  data                - Pointer to validation data structure
 154  *              node                - Namespace node for the method/object
 155  *              validate_status     - Original status of earlier validation
 156  *              return_object_ptr   - Pointer to the object returned from the
 157  *                                    evaluation of a method or object
 158  *
 159  * RETURN:      Status. AE_OK if repair was successful. If name is not
 160  *              matched, validate_status is returned.
 161  *
 162  * DESCRIPTION: Attempt to repair/convert a return object of a type that was
 163  *              not expected.
 164  *
 165  *****************************************************************************/
 166
 167 acpi_status
 168 acpi_ns_complex_repairs(struct acpi_predefined_data *data,
 169                         struct acpi_namespace_node *node,
 170                         acpi_status validate_status,
 171                         union acpi_operand_object **return_object_ptr)
 172 {
 173         const struct acpi_repair_info *predefined;
 174         acpi_status status;
 175
 176         /* Check if this name is in the list of repairable names */
 177
 178         predefined = acpi_ns_match_complex_repair(node);
 179         if (!predefined) {
 180                 return (validate_status);
 181         }
 182
 183         status = predefined->repair_function(data, return_object_ptr);
 184         return (status);
 185 }
 186
 187 /******************************************************************************
 188  *
 189  * FUNCTION:    acpi_ns_match_complex_repair
 190  *
 191  * PARAMETERS:  node                - Namespace node for the method/object
 192  *
 193  * RETURN:      Pointer to entry in repair table. NULL indicates not found.
 194  *
 195  * DESCRIPTION: Check an object name against the repairable object list.
 196  *
 197  *****************************************************************************/
 198
 199 static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct
 200                                                                    acpi_namespace_node
 201                                                                    *node)
 202 {
 203         const struct acpi_repair_info *this_name;
 204
 205         /* Search info table for a repairable predefined method/object name */
 206
 207         this_name = acpi_ns_repairable_names;
 208         while (this_name->repair_function) {
 209                 if (ACPI_COMPARE_NAME(node->name.ascii, this_name->name)) {
 210                         return (this_name);
 211                 }
 212                 this_name++;
 213         }
 214
 215         return (NULL);          /* Not found */
 216 }
 217
 218 /******************************************************************************
 219  *
 220  * FUNCTION:    acpi_ns_repair_ALR
 221  *
 222  * PARAMETERS:  data                - Pointer to validation data structure
 223  *              return_object_ptr   - Pointer to the object returned from the
 224  *                                    evaluation of a method or object
 225  *
 226  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 227  *
 228  * DESCRIPTION: Repair for the _ALR object. If necessary, sort the object list
 229  *              ascending by the ambient illuminance values.
 230  *
 231  *****************************************************************************/
 232
 233 static acpi_status
 234 acpi_ns_repair_ALR(struct acpi_predefined_data *data,
 235                    union acpi_operand_object **return_object_ptr)
 236 {
 237         union acpi_operand_object *return_object = *return_object_ptr;
 238         acpi_status status;
 239
 240         status = acpi_ns_check_sorted_list(data, return_object, 2, 1,
 241                                            ACPI_SORT_ASCENDING,
 242                                            "AmbientIlluminance");
 243
 244         return (status);
 245 }
 246
 247 /******************************************************************************
 248  *
 249  * FUNCTION:    acpi_ns_repair_FDE
 250  *
 251  * PARAMETERS:  data                - Pointer to validation data structure
 252  *              return_object_ptr   - Pointer to the object returned from the
 253  *                                    evaluation of a method or object
 254  *
 255  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 256  *
 257  * DESCRIPTION: Repair for the _FDE and _GTM objects. The expected return
 258  *              value is a Buffer of 5 DWORDs. This function repairs a common
 259  *              problem where the return value is a Buffer of BYTEs, not
 260  *              DWORDs.
 261  *
 262  *****************************************************************************/
 263
 264 static acpi_status
 265 acpi_ns_repair_FDE(struct acpi_predefined_data *data,
 266                    union acpi_operand_object **return_object_ptr)
 267 {
 268         union acpi_operand_object *return_object = *return_object_ptr;
 269         union acpi_operand_object *buffer_object;
 270         u8 *byte_buffer;
 271         u32 *dword_buffer;
 272         u32 i;
 273
 274         ACPI_FUNCTION_NAME(ns_repair_FDE);
 275
 276         switch (return_object->common.type) {
 277         case ACPI_TYPE_BUFFER:
 278
 279                 /* This is the expected type. Length should be (at least) 5 DWORDs */
 280
 281                 if (return_object->buffer.length >= ACPI_FDE_DWORD_BUFFER_SIZE) {
 282                         return (AE_OK);
 283                 }
 284
 285                 /* We can only repair if we have exactly 5 BYTEs */
 286
 287                 if (return_object->buffer.length != ACPI_FDE_BYTE_BUFFER_SIZE) {
 288                         ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
 289                                               data->node_flags,
 290                                               "Incorrect return buffer length %u, expected %u",
 291                                               return_object->buffer.length,
 292                                               ACPI_FDE_DWORD_BUFFER_SIZE));
 293
 294                         return (AE_AML_OPERAND_TYPE);
 295                 }
 296
 297                 /* Create the new (larger) buffer object */
 298
 299                 buffer_object =
 300                     acpi_ut_create_buffer_object(ACPI_FDE_DWORD_BUFFER_SIZE);
 301                 if (!buffer_object) {
 302                         return (AE_NO_MEMORY);
 303                 }
 304
 305                 /* Expand each byte to a DWORD */
 306
 307                 byte_buffer = return_object->buffer.pointer;
 308                 dword_buffer =
 309                     ACPI_CAST_PTR(u32, buffer_object->buffer.pointer);
 310
 311                 for (i = 0; i < ACPI_FDE_FIELD_COUNT; i++) {
 312                         *dword_buffer = (u32) *byte_buffer;
 313                         dword_buffer++;
 314                         byte_buffer++;
 315                 }
 316
 317                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 318                                   "%s Expanded Byte Buffer to expected DWord Buffer\n",
 319                                   data->pathname));
 320                 break;
 321
 322         default:
 323                 return (AE_AML_OPERAND_TYPE);
 324         }
 325
 326         /* Delete the original return object, return the new buffer object */
 327
 328         acpi_ut_remove_reference(return_object);
 329         *return_object_ptr = buffer_object;
 330
 331         data->flags |= ACPI_OBJECT_REPAIRED;
 332         return (AE_OK);
 333 }
 334
 335 /******************************************************************************
 336  *
 337  * FUNCTION:    acpi_ns_repair_CID
 338  *
 339  * PARAMETERS:  data                - Pointer to validation data structure
 340  *              return_object_ptr   - Pointer to the object returned from the
 341  *                                    evaluation of a method or object
 342  *
 343  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 344  *
 345  * DESCRIPTION: Repair for the _CID object. If a string, ensure that all
 346  *              letters are uppercase and that there is no leading asterisk.
 347  *              If a Package, ensure same for all string elements.
 348  *
 349  *****************************************************************************/
 350
 351 static acpi_status
 352 acpi_ns_repair_CID(struct acpi_predefined_data *data,
 353                    union acpi_operand_object **return_object_ptr)
 354 {
 355         acpi_status status;
 356         union acpi_operand_object *return_object = *return_object_ptr;
 357         union acpi_operand_object **element_ptr;
 358         union acpi_operand_object *original_element;
 359         u16 original_ref_count;
 360         u32 i;
 361
 362         /* Check for _CID as a simple string */
 363
 364         if (return_object->common.type == ACPI_TYPE_STRING) {
 365                 status = acpi_ns_repair_HID(data, return_object_ptr);
 366                 return (status);
 367         }
 368
 369         /* Exit if not a Package */
 370
 371         if (return_object->common.type != ACPI_TYPE_PACKAGE) {
 372                 return (AE_OK);
 373         }
 374
 375         /* Examine each element of the _CID package */
 376
 377         element_ptr = return_object->package.elements;
 378         for (i = 0; i < return_object->package.count; i++) {
 379                 original_element = *element_ptr;
 380                 original_ref_count = original_element->common.reference_count;
 381
 382                 status = acpi_ns_repair_HID(data, element_ptr);
 383                 if (ACPI_FAILURE(status)) {
 384                         return (status);
 385                 }
 386
 387                 /* Take care with reference counts */
 388
 389                 if (original_element != *element_ptr) {
 390
 391                         /* Element was replaced */
 392
 393                         (*element_ptr)->common.reference_count =
 394                             original_ref_count;
 395
 396                         acpi_ut_remove_reference(original_element);
 397                 }
 398
 399                 element_ptr++;
 400         }
 401
 402         return (AE_OK);
 403 }
 404
 405 /******************************************************************************
 406  *
 407  * FUNCTION:    acpi_ns_repair_HID
 408  *
 409  * PARAMETERS:  data                - Pointer to validation data structure
 410  *              return_object_ptr   - Pointer to the object returned from the
 411  *                                    evaluation of a method or object
 412  *
 413  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 414  *
 415  * DESCRIPTION: Repair for the _HID object. If a string, ensure that all
 416  *              letters are uppercase and that there is no leading asterisk.
 417  *
 418  *****************************************************************************/
 419
 420 static acpi_status
 421 acpi_ns_repair_HID(struct acpi_predefined_data *data,
 422                    union acpi_operand_object **return_object_ptr)
 423 {
 424         union acpi_operand_object *return_object = *return_object_ptr;
 425         union acpi_operand_object *new_string;
 426         char *source;
 427         char *dest;
 428
 429         ACPI_FUNCTION_NAME(ns_repair_HID);
 430
 431         /* We only care about string _HID objects (not integers) */
 432
 433         if (return_object->common.type != ACPI_TYPE_STRING) {
 434                 return (AE_OK);
 435         }
 436
 437         if (return_object->string.length == 0) {
 438                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 439                                       "Invalid zero-length _HID or _CID string"));
 440
 441                 /* Return AE_OK anyway, let driver handle it */
 442
 443                 data->flags |= ACPI_OBJECT_REPAIRED;
 444                 return (AE_OK);
 445         }
 446
 447         /* It is simplest to always create a new string object */
 448
 449         new_string = acpi_ut_create_string_object(return_object->string.length);
 450         if (!new_string) {
 451                 return (AE_NO_MEMORY);
 452         }
 453
 454         /*
 455          * Remove a leading asterisk if present. For some unknown reason, there
 456          * are many machines in the field that contains IDs like this.
 457          *
 458          * Examples: "*PNP0C03", "*ACPI0003"
 459          */
 460         source = return_object->string.pointer;
 461         if (*source == '*') {
 462                 source++;
 463                 new_string->string.length--;
 464
 465                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 466                                   "%s: Removed invalid leading asterisk\n",
 467                                   data->pathname));
 468         }
 469
 470         /*
 471          * Copy and uppercase the string. From the ACPI 5.0 specification:
 472          *
 473          * A valid PNP ID must be of the form "AAA####" where A is an uppercase
 474          * letter and # is a hex digit. A valid ACPI ID must be of the form
 475          * "NNNN####" where N is an uppercase letter or decimal digit, and
 476          * # is a hex digit.
 477          */
 478         for (dest = new_string->string.pointer; *source; dest++, source++) {
 479                 *dest = (char)ACPI_TOUPPER(*source);
 480         }
 481
 482         acpi_ut_remove_reference(return_object);
 483         *return_object_ptr = new_string;
 484         return (AE_OK);
 485 }
 486
 487 /******************************************************************************
 488  *
 489  * FUNCTION:    acpi_ns_repair_TSS
 490  *
 491  * PARAMETERS:  data                - Pointer to validation data structure
 492  *              return_object_ptr   - Pointer to the object returned from the
 493  *                                    evaluation of a method or object
 494  *
 495  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 496  *
 497  * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list
 498  *              descending by the power dissipation values.
 499  *
 500  *****************************************************************************/
 501
 502 static acpi_status
 503 acpi_ns_repair_TSS(struct acpi_predefined_data *data,
 504                    union acpi_operand_object **return_object_ptr)
 505 {
 506         union acpi_operand_object *return_object = *return_object_ptr;
 507         acpi_status status;
 508         struct acpi_namespace_node *node;
 509
 510         /*
 511          * We can only sort the _TSS return package if there is no _PSS in the
 512          * same scope. This is because if _PSS is present, the ACPI specification
 513          * dictates that the _TSS Power Dissipation field is to be ignored, and
 514          * therefore some BIOSs leave garbage values in the _TSS Power field(s).
 515          * In this case, it is best to just return the _TSS package as-is.
 516          * (May, 2011)
 517          */
 518         status =
 519             acpi_ns_get_node(data->node, "^_PSS", ACPI_NS_NO_UPSEARCH, &node);
 520         if (ACPI_SUCCESS(status)) {
 521                 return (AE_OK);
 522         }
 523
 524         status = acpi_ns_check_sorted_list(data, return_object, 5, 1,
 525                                            ACPI_SORT_DESCENDING,
 526                                            "PowerDissipation");
 527
 528         return (status);
 529 }
 530
 531 /******************************************************************************
 532  *
 533  * FUNCTION:    acpi_ns_repair_PSS
 534  *
 535  * PARAMETERS:  data                - Pointer to validation data structure
 536  *              return_object_ptr   - Pointer to the object returned from the
 537  *                                    evaluation of a method or object
 538  *
 539  * RETURN:      Status. AE_OK if object is OK or was repaired successfully
 540  *
 541  * DESCRIPTION: Repair for the _PSS object. If necessary, sort the object list
 542  *              by the CPU frequencies. Check that the power dissipation values
 543  *              are all proportional to CPU frequency (i.e., sorting by
 544  *              frequency should be the same as sorting by power.)
 545  *
 546  *****************************************************************************/
 547
 548 static acpi_status
 549 acpi_ns_repair_PSS(struct acpi_predefined_data *data,
 550                    union acpi_operand_object **return_object_ptr)
 551 {
 552         union acpi_operand_object *return_object = *return_object_ptr;
 553         union acpi_operand_object **outer_elements;
 554         u32 outer_element_count;
 555         union acpi_operand_object **elements;
 556         union acpi_operand_object *obj_desc;
 557         u32 previous_value;
 558         acpi_status status;
 559         u32 i;
 560
 561         /*
 562          * Entries (sub-packages) in the _PSS Package must be sorted by power
 563          * dissipation, in descending order. If it appears that the list is
 564          * incorrectly sorted, sort it. We sort by cpu_frequency, since this
 565          * should be proportional to the power.
 566          */
 567         status = acpi_ns_check_sorted_list(data, return_object, 6, 0,
 568                                            ACPI_SORT_DESCENDING,
 569                                            "CpuFrequency");
 570         if (ACPI_FAILURE(status)) {
 571                 return (status);
 572         }
 573
 574         /*
 575          * We now know the list is correctly sorted by CPU frequency. Check if
 576          * the power dissipation values are proportional.
 577          */
 578         previous_value = ACPI_UINT32_MAX;
 579         outer_elements = return_object->package.elements;
 580         outer_element_count = return_object->package.count;
 581
 582         for (i = 0; i < outer_element_count; i++) {
 583                 elements = (*outer_elements)->package.elements;
 584                 obj_desc = elements[1]; /* Index1 = power_dissipation */
 585
 586                 if ((u32) obj_desc->integer.value > previous_value) {
 587                         ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
 588                                               data->node_flags,
 589                                               "SubPackage[%u,%u] - suspicious power dissipation values",
 590                                               i - 1, i));
 591                 }
 592
 593                 previous_value = (u32) obj_desc->integer.value;
 594                 outer_elements++;
 595         }
 596
 597         return (AE_OK);
 598 }
 599
 600 /******************************************************************************
 601  *
 602  * FUNCTION:    acpi_ns_check_sorted_list
 603  *
 604  * PARAMETERS:  data                - Pointer to validation data structure
 605  *              return_object       - Pointer to the top-level returned object
 606  *              expected_count      - Minimum length of each sub-package
 607  *              sort_index          - Sub-package entry to sort on
 608  *              sort_direction      - Ascending or descending
 609  *              sort_key_name       - Name of the sort_index field
 610  *
 611  * RETURN:      Status. AE_OK if the list is valid and is sorted correctly or
 612  *              has been repaired by sorting the list.
 613  *
 614  * DESCRIPTION: Check if the package list is valid and sorted correctly by the
 615  *              sort_index. If not, then sort the list.
 616  *
 617  *****************************************************************************/
 618
 619 static acpi_status
 620 acpi_ns_check_sorted_list(struct acpi_predefined_data *data,
 621                           union acpi_operand_object *return_object,
 622                           u32 expected_count,
 623                           u32 sort_index,
 624                           u8 sort_direction, char *sort_key_name)
 625 {
 626         u32 outer_element_count;
 627         union acpi_operand_object **outer_elements;
 628         union acpi_operand_object **elements;
 629         union acpi_operand_object *obj_desc;
 630         u32 i;
 631         u32 previous_value;
 632
 633         ACPI_FUNCTION_NAME(ns_check_sorted_list);
 634
 635         /* The top-level object must be a package */
 636
 637         if (return_object->common.type != ACPI_TYPE_PACKAGE) {
 638                 return (AE_AML_OPERAND_TYPE);
 639         }
 640
 641         /*
 642          * NOTE: assumes list of sub-packages contains no NULL elements.
 643          * Any NULL elements should have been removed by earlier call
 644          * to acpi_ns_remove_null_elements.
 645          */
 646         outer_elements = return_object->package.elements;
 647         outer_element_count = return_object->package.count;
 648         if (!outer_element_count) {
 649                 return (AE_AML_PACKAGE_LIMIT);
 650         }
 651
 652         previous_value = 0;
 653         if (sort_direction == ACPI_SORT_DESCENDING) {
 654                 previous_value = ACPI_UINT32_MAX;
 655         }
 656
 657         /* Examine each subpackage */
 658
 659         for (i = 0; i < outer_element_count; i++) {
 660
 661                 /* Each element of the top-level package must also be a package */
 662
 663                 if ((*outer_elements)->common.type != ACPI_TYPE_PACKAGE) {
 664                         return (AE_AML_OPERAND_TYPE);
 665                 }
 666
 667                 /* Each sub-package must have the minimum length */
 668
 669                 if ((*outer_elements)->package.count < expected_count) {
 670                         return (AE_AML_PACKAGE_LIMIT);
 671                 }
 672
 673                 elements = (*outer_elements)->package.elements;
 674                 obj_desc = elements[sort_index];
 675
 676                 if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
 677                         return (AE_AML_OPERAND_TYPE);
 678                 }
 679
 680                 /*
 681                  * The list must be sorted in the specified order. If we detect a
 682                  * discrepancy, sort the entire list.
 683                  */
 684                 if (((sort_direction == ACPI_SORT_ASCENDING) &&
 685                      (obj_desc->integer.value < previous_value)) ||
 686                     ((sort_direction == ACPI_SORT_DESCENDING) &&
 687                      (obj_desc->integer.value > previous_value))) {
 688                         acpi_ns_sort_list(return_object->package.elements,
 689                                           outer_element_count, sort_index,
 690                                           sort_direction);
 691
 692                         data->flags |= ACPI_OBJECT_REPAIRED;
 693
 694                         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 695                                           "%s: Repaired unsorted list - now sorted by %s\n",
 696                                           data->pathname, sort_key_name));
 697                         return (AE_OK);
 698                 }
 699
 700                 previous_value = (u32) obj_desc->integer.value;
 701                 outer_elements++;
 702         }
 703
 704         return (AE_OK);
 705 }
 706
 707 /******************************************************************************
 708  *
 709  * FUNCTION:    acpi_ns_sort_list
 710  *
 711  * PARAMETERS:  elements            - Package object element list
 712  *              count               - Element count for above
 713  *              index               - Sort by which package element
 714  *              sort_direction      - Ascending or Descending sort
 715  *
 716  * RETURN:      None
 717  *
 718  * DESCRIPTION: Sort the objects that are in a package element list.
 719  *
 720  * NOTE: Assumes that all NULL elements have been removed from the package,
 721  *       and that all elements have been verified to be of type Integer.
 722  *
 723  *****************************************************************************/
 724
 725 static void
 726 acpi_ns_sort_list(union acpi_operand_object **elements,
 727                   u32 count, u32 index, u8 sort_direction)
 728 {
 729         union acpi_operand_object *obj_desc1;
 730         union acpi_operand_object *obj_desc2;
 731         union acpi_operand_object *temp_obj;
 732         u32 i;
 733         u32 j;
 734
 735         /* Simple bubble sort */
 736
 737         for (i = 1; i < count; i++) {
 738                 for (j = (count - 1); j >= i; j--) {
 739                         obj_desc1 = elements[j - 1]->package.elements[index];
 740                         obj_desc2 = elements[j]->package.elements[index];
 741
 742                         if (((sort_direction == ACPI_SORT_ASCENDING) &&
 743                              (obj_desc1->integer.value >
 744                               obj_desc2->integer.value))
 745                             || ((sort_direction == ACPI_SORT_DESCENDING)
 746                                 && (obj_desc1->integer.value <
 747                                     obj_desc2->integer.value))) {
 748                                 temp_obj = elements[j - 1];
 749                                 elements[j - 1] = elements[j];
 750                                 elements[j] = temp_obj;
 751                         }
 752                 }
 753         }
 754 }