1 // SPDX-License-Identifier: GPL-2.0
3 * Intel Multiprocessor Specification 1.1 and 1.4
4 * compliant MP-table parsing routines.
6 * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
7 * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
8 * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/memblock.h>
15 #include <linux/kernel_stat.h>
16 #include <linux/mc146818rtc.h>
17 #include <linux/bitops.h>
18 #include <linux/acpi.h>
19 #include <linux/smp.h>
20 #include <linux/pci.h>
22 #include <asm/i8259.h>
23 #include <asm/io_apic.h>
25 #include <asm/irqdomain.h>
27 #include <asm/mpspec.h>
28 #include <asm/proto.h>
29 #include <asm/bios_ebda.h>
30 #include <asm/e820/api.h>
31 #include <asm/setup.h>
36 * Checksum an MP configuration block.
39 static int __init mpf_checksum(unsigned char *mp, int len)
49 static void __init MP_processor_info(struct mpc_cpu *m)
51 char *bootup_cpu = "";
53 if (!(m->cpuflag & CPU_ENABLED)) {
58 if (m->cpuflag & CPU_BOOTPROCESSOR)
59 bootup_cpu = " (Bootup-CPU)";
61 pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
62 generic_processor_info(m->apicid);
65 #ifdef CONFIG_X86_IO_APIC
66 static void __init mpc_oem_bus_info(struct mpc_bus *m, char *str)
68 memcpy(str, m->bustype, 6);
70 apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
73 static void __init MP_bus_info(struct mpc_bus *m)
77 mpc_oem_bus_info(m, str);
79 #if MAX_MP_BUSSES < 256
80 if (m->busid >= MAX_MP_BUSSES) {
81 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
82 m->busid, str, MAX_MP_BUSSES - 1);
87 set_bit(m->busid, mp_bus_not_pci);
88 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
90 mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
92 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
93 clear_bit(m->busid, mp_bus_not_pci);
95 mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
96 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
97 mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
100 pr_warn("Unknown bustype %s - ignoring\n", str);
103 static void __init MP_ioapic_info(struct mpc_ioapic *m)
105 struct ioapic_domain_cfg cfg = {
106 .type = IOAPIC_DOMAIN_LEGACY,
107 .ops = &mp_ioapic_irqdomain_ops,
110 if (m->flags & MPC_APIC_USABLE)
111 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
114 static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
116 apic_printk(APIC_VERBOSE,
117 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
118 mp_irq->irqtype, mp_irq->irqflag & 3,
119 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
120 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
123 #else /* CONFIG_X86_IO_APIC */
124 static inline void __init MP_bus_info(struct mpc_bus *m) {}
125 static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
126 #endif /* CONFIG_X86_IO_APIC */
128 static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
130 apic_printk(APIC_VERBOSE,
131 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
132 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
133 m->srcbusirq, m->destapic, m->destapiclint);
139 static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
142 if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
143 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
144 mpc->signature[0], mpc->signature[1],
145 mpc->signature[2], mpc->signature[3]);
148 if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
149 pr_err("MPTABLE: checksum error!\n");
152 if (mpc->spec != 0x01 && mpc->spec != 0x04) {
153 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
157 pr_err("MPTABLE: null local APIC address!\n");
160 memcpy(oem, mpc->oem, 8);
162 pr_info("MPTABLE: OEM ID: %s\n", oem);
164 memcpy(str, mpc->productid, 12);
167 pr_info("MPTABLE: Product ID: %s\n", str);
169 pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
174 static void skip_entry(unsigned char **ptr, int *count, int size)
180 static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
182 pr_err("Your mptable is wrong, contact your HW vendor!\n");
183 pr_cont("type %x\n", *mpt);
184 print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
185 1, mpc, mpc->length, 1);
188 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
193 int count = sizeof(*mpc);
194 unsigned char *mpt = ((unsigned char *)mpc) + count;
196 if (!smp_check_mpc(mpc, oem, str))
199 /* Initialize the lapic mapping */
201 register_lapic_address(mpc->lapic);
206 /* Now process the configuration blocks. */
207 while (count < mpc->length) {
210 /* ACPI may have already provided this data */
212 MP_processor_info((struct mpc_cpu *)mpt);
213 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
216 MP_bus_info((struct mpc_bus *)mpt);
217 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
220 MP_ioapic_info((struct mpc_ioapic *)mpt);
221 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
224 mp_save_irq((struct mpc_intsrc *)mpt);
225 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
228 MP_lintsrc_info((struct mpc_lintsrc *)mpt);
229 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
233 smp_dump_mptable(mpc, mpt);
240 pr_err("MPTABLE: no processors registered!\n");
241 return num_processors;
244 #ifdef CONFIG_X86_IO_APIC
246 static int __init ELCR_trigger(unsigned int irq)
250 port = PIC_ELCR1 + (irq >> 3);
251 return (inb(port) >> (irq & 7)) & 1;
254 static void __init construct_default_ioirq_mptable(int mpc_default_type)
256 struct mpc_intsrc intsrc;
258 int ELCR_fallback = 0;
260 intsrc.type = MP_INTSRC;
261 intsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
263 intsrc.dstapic = mpc_ioapic_id(0);
265 intsrc.irqtype = mp_INT;
268 * If true, we have an ISA/PCI system with no IRQ entries
269 * in the MP table. To prevent the PCI interrupts from being set up
270 * incorrectly, we try to use the ELCR. The sanity check to see if
271 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
272 * never be level sensitive, so we simply see if the ELCR agrees.
273 * If it does, we assume it's valid.
275 if (mpc_default_type == 5) {
276 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
278 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
280 pr_err("ELCR contains invalid data... not using ELCR\n");
282 pr_info("Using ELCR to identify PCI interrupts\n");
287 for (i = 0; i < 16; i++) {
288 switch (mpc_default_type) {
290 if (i == 0 || i == 13)
291 continue; /* IRQ0 & IRQ13 not connected */
295 continue; /* IRQ2 is never connected */
300 * If the ELCR indicates a level-sensitive interrupt, we
301 * copy that information over to the MP table in the
302 * irqflag field (level sensitive, active high polarity).
304 if (ELCR_trigger(i)) {
305 intsrc.irqflag = MP_IRQTRIG_LEVEL |
306 MP_IRQPOL_ACTIVE_HIGH;
308 intsrc.irqflag = MP_IRQTRIG_DEFAULT |
313 intsrc.srcbusirq = i;
314 intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
315 mp_save_irq(&intsrc);
318 intsrc.irqtype = mp_ExtINT;
319 intsrc.srcbusirq = 0;
320 intsrc.dstirq = 0; /* 8259A to INTIN0 */
321 mp_save_irq(&intsrc);
325 static void __init construct_ioapic_table(int mpc_default_type)
327 struct mpc_ioapic ioapic;
332 switch (mpc_default_type) {
334 pr_err("???\nUnknown standard configuration %d\n",
339 memcpy(bus.bustype, "ISA ", 6);
344 memcpy(bus.bustype, "EISA ", 6);
348 if (mpc_default_type > 4) {
350 memcpy(bus.bustype, "PCI ", 6);
354 ioapic.type = MP_IOAPIC;
356 ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
357 ioapic.flags = MPC_APIC_USABLE;
358 ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
359 MP_ioapic_info(&ioapic);
362 * We set up most of the low 16 IO-APIC pins according to MPS rules.
364 construct_default_ioirq_mptable(mpc_default_type);
367 static inline void __init construct_ioapic_table(int mpc_default_type) { }
370 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
372 struct mpc_cpu processor;
373 struct mpc_lintsrc lintsrc;
374 int linttypes[2] = { mp_ExtINT, mp_NMI };
378 * 2 CPUs, numbered 0 & 1.
380 processor.type = MP_PROCESSOR;
381 /* Either an integrated APIC or a discrete 82489DX. */
382 processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
383 processor.cpuflag = CPU_ENABLED;
384 processor.cpufeature = (boot_cpu_data.x86 << 8) |
385 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
386 processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
387 processor.reserved[0] = 0;
388 processor.reserved[1] = 0;
389 for (i = 0; i < 2; i++) {
390 processor.apicid = i;
391 MP_processor_info(&processor);
394 construct_ioapic_table(mpc_default_type);
396 lintsrc.type = MP_LINTSRC;
397 lintsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
398 lintsrc.srcbusid = 0;
399 lintsrc.srcbusirq = 0;
400 lintsrc.destapic = MP_APIC_ALL;
401 for (i = 0; i < 2; i++) {
402 lintsrc.irqtype = linttypes[i];
403 lintsrc.destapiclint = i;
404 MP_lintsrc_info(&lintsrc);
408 static unsigned long mpf_base;
409 static bool mpf_found;
411 static unsigned long __init get_mpc_size(unsigned long physptr)
413 struct mpc_table *mpc;
416 mpc = early_memremap(physptr, PAGE_SIZE);
418 early_memunmap(mpc, PAGE_SIZE);
419 apic_printk(APIC_VERBOSE, " mpc: %lx-%lx\n", physptr, physptr + size);
424 static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
426 struct mpc_table *mpc;
429 size = get_mpc_size(mpf->physptr);
430 mpc = early_memremap(mpf->physptr, size);
433 * Read the physical hardware table. Anything here will
434 * override the defaults.
436 if (!smp_read_mpc(mpc, early)) {
437 #ifdef CONFIG_X86_LOCAL_APIC
438 smp_found_config = 0;
440 pr_err("BIOS bug, MP table errors detected!...\n");
441 pr_cont("... disabling SMP support. (tell your hw vendor)\n");
442 early_memunmap(mpc, size);
445 early_memunmap(mpc, size);
450 #ifdef CONFIG_X86_IO_APIC
452 * If there are no explicit MP IRQ entries, then we are
453 * broken. We set up most of the low 16 IO-APIC pins to
454 * ISA defaults and hope it will work.
456 if (!mp_irq_entries) {
459 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
463 memcpy(bus.bustype, "ISA ", 6);
466 construct_default_ioirq_mptable(0);
474 * Scan the memory blocks for an SMP configuration block.
476 void __init default_get_smp_config(unsigned int early)
478 struct mpf_intel *mpf;
480 if (!smp_found_config)
486 if (acpi_lapic && early)
490 * MPS doesn't support hyperthreading, aka only have
491 * thread 0 apic id in MPS table
493 if (acpi_lapic && acpi_ioapic)
496 mpf = early_memremap(mpf_base, sizeof(*mpf));
498 pr_err("MPTABLE: error mapping MP table\n");
502 pr_info("Intel MultiProcessor Specification v1.%d\n",
504 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
505 if (mpf->feature2 & (1 << 7)) {
506 pr_info(" IMCR and PIC compatibility mode.\n");
509 pr_info(" Virtual Wire compatibility mode.\n");
514 * Now see if we need to read further.
518 /* Local APIC has default address */
519 register_lapic_address(APIC_DEFAULT_PHYS_BASE);
523 pr_info("Default MP configuration #%d\n", mpf->feature1);
524 construct_default_ISA_mptable(mpf->feature1);
526 } else if (mpf->physptr) {
527 if (check_physptr(mpf, early))
533 pr_info("Processors: %d\n", num_processors);
535 * Only use the first configuration found.
538 early_memunmap(mpf, sizeof(*mpf));
541 static void __init smp_reserve_memory(struct mpf_intel *mpf)
543 memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
546 static int __init smp_scan_config(unsigned long base, unsigned long length)
549 struct mpf_intel *mpf;
552 apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
553 base, base + length - 1);
554 BUILD_BUG_ON(sizeof(*mpf) != 16);
557 bp = early_memremap(base, length);
558 mpf = (struct mpf_intel *)bp;
559 if ((*bp == SMP_MAGIC_IDENT) &&
560 (mpf->length == 1) &&
561 !mpf_checksum((unsigned char *)bp, 16) &&
562 ((mpf->specification == 1)
563 || (mpf->specification == 4))) {
564 #ifdef CONFIG_X86_LOCAL_APIC
565 smp_found_config = 1;
570 pr_info("found SMP MP-table at [mem %#010lx-%#010lx]\n",
571 base, base + sizeof(*mpf) - 1);
573 memblock_reserve(base, sizeof(*mpf));
575 smp_reserve_memory(mpf);
579 early_memunmap(bp, length);
590 void __init mpparse_find_mptable(void)
592 unsigned int address;
595 * FIXME: Linux assumes you have 640K of base ram..
596 * this continues the error...
598 * 1) Scan the bottom 1K for a signature
599 * 2) Scan the top 1K of base RAM
600 * 3) Scan the 64K of bios
602 if (smp_scan_config(0x0, 0x400) ||
603 smp_scan_config(639 * 0x400, 0x400) ||
604 smp_scan_config(0xF0000, 0x10000))
607 * If it is an SMP machine we should know now, unless the
608 * configuration is in an EISA bus machine with an
609 * extended bios data area.
611 * there is a real-mode segmented pointer pointing to the
612 * 4K EBDA area at 0x40E, calculate and scan it here.
614 * NOTE! There are Linux loaders that will corrupt the EBDA
615 * area, and as such this kind of SMP config may be less
616 * trustworthy, simply because the SMP table may have been
617 * stomped on during early boot. These loaders are buggy and
620 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
623 address = get_bios_ebda();
625 smp_scan_config(address, 0x400);
628 #ifdef CONFIG_X86_IO_APIC
629 static u8 __initdata irq_used[MAX_IRQ_SOURCES];
631 static int __init get_MP_intsrc_index(struct mpc_intsrc *m)
635 if (m->irqtype != mp_INT)
638 if (m->irqflag != (MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW))
643 for (i = 0; i < mp_irq_entries; i++) {
644 if (mp_irqs[i].irqtype != mp_INT)
647 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
648 MP_IRQPOL_ACTIVE_LOW))
651 if (mp_irqs[i].srcbus != m->srcbus)
653 if (mp_irqs[i].srcbusirq != m->srcbusirq)
656 /* already claimed */
667 #define SPARE_SLOT_NUM 20
669 static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
671 static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
675 apic_printk(APIC_VERBOSE, "OLD ");
676 print_mp_irq_info(m);
678 i = get_MP_intsrc_index(m);
680 memcpy(m, &mp_irqs[i], sizeof(*m));
681 apic_printk(APIC_VERBOSE, "NEW ");
682 print_mp_irq_info(&mp_irqs[i]);
686 /* legacy, do nothing */
689 if (*nr_m_spare < SPARE_SLOT_NUM) {
691 * not found (-1), or duplicated (-2) are invalid entries,
692 * we need to use the slot later
694 m_spare[*nr_m_spare] = m;
700 check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
702 if (!mpc_new_phys || count <= mpc_new_length) {
703 WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
709 #else /* CONFIG_X86_IO_APIC */
711 inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
712 #endif /* CONFIG_X86_IO_APIC */
714 static int __init replace_intsrc_all(struct mpc_table *mpc,
715 unsigned long mpc_new_phys,
716 unsigned long mpc_new_length)
718 #ifdef CONFIG_X86_IO_APIC
721 int count = sizeof(*mpc);
723 unsigned char *mpt = ((unsigned char *)mpc) + count;
725 pr_info("mpc_length %x\n", mpc->length);
726 while (count < mpc->length) {
729 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
732 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
735 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
738 check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
739 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
742 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
746 smp_dump_mptable(mpc, mpt);
751 #ifdef CONFIG_X86_IO_APIC
752 for (i = 0; i < mp_irq_entries; i++) {
756 if (mp_irqs[i].irqtype != mp_INT)
759 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
760 MP_IRQPOL_ACTIVE_LOW))
763 if (nr_m_spare > 0) {
764 apic_printk(APIC_VERBOSE, "*NEW* found\n");
766 memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
767 m_spare[nr_m_spare] = NULL;
769 struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
770 count += sizeof(struct mpc_intsrc);
771 if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
773 memcpy(m, &mp_irqs[i], sizeof(*m));
775 mpt += sizeof(struct mpc_intsrc);
777 print_mp_irq_info(&mp_irqs[i]);
781 /* update checksum */
783 mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
788 int enable_update_mptable;
790 static int __init update_mptable_setup(char *str)
792 enable_update_mptable = 1;
798 early_param("update_mptable", update_mptable_setup);
800 static unsigned long __initdata mpc_new_phys;
801 static unsigned long mpc_new_length __initdata = 4096;
803 /* alloc_mptable or alloc_mptable=4k */
804 static int __initdata alloc_mptable;
805 static int __init parse_alloc_mptable_opt(char *p)
807 enable_update_mptable = 1;
814 mpc_new_length = memparse(p, &p);
817 early_param("alloc_mptable", parse_alloc_mptable_opt);
819 void __init e820__memblock_alloc_reserved_mpc_new(void)
821 if (enable_update_mptable && alloc_mptable)
822 mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4);
825 static int __init update_mp_table(void)
829 struct mpf_intel *mpf;
830 struct mpc_table *mpc, *mpc_new;
833 if (!enable_update_mptable)
839 mpf = early_memremap(mpf_base, sizeof(*mpf));
841 pr_err("MPTABLE: mpf early_memremap() failed\n");
846 * Now see if we need to go further.
854 size = get_mpc_size(mpf->physptr);
855 mpc = early_memremap(mpf->physptr, size);
857 pr_err("MPTABLE: mpc early_memremap() failed\n");
861 if (!smp_check_mpc(mpc, oem, str))
864 pr_info("mpf: %llx\n", (u64)mpf_base);
865 pr_info("physptr: %x\n", mpf->physptr);
867 if (mpc_new_phys && mpc->length > mpc_new_length) {
869 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
874 unsigned char old, new;
875 /* check if we can change the position */
877 old = mpf_checksum((unsigned char *)mpc, mpc->length);
878 mpc->checksum = 0xff;
879 new = mpf_checksum((unsigned char *)mpc, mpc->length);
881 pr_info("mpc is readonly, please try alloc_mptable instead\n");
884 pr_info("use in-position replacing\n");
886 mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
888 pr_err("MPTABLE: new mpc early_memremap() failed\n");
891 mpf->physptr = mpc_new_phys;
892 memcpy(mpc_new, mpc, mpc->length);
893 early_memunmap(mpc, size);
895 size = mpc_new_length;
896 /* check if we can modify that */
897 if (mpc_new_phys - mpf->physptr) {
898 struct mpf_intel *mpf_new;
899 /* steal 16 bytes from [0, 1k) */
900 mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
902 pr_err("MPTABLE: new mpf early_memremap() failed\n");
905 pr_info("mpf new: %x\n", 0x400 - 16);
906 memcpy(mpf_new, mpf, 16);
907 early_memunmap(mpf, sizeof(*mpf));
909 mpf->physptr = mpc_new_phys;
912 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
913 pr_info("physptr new: %x\n", mpf->physptr);
917 * only replace the one with mp_INT and
918 * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
919 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
920 * may need pci=routeirq for all coverage
922 replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
925 early_memunmap(mpc, size);
928 early_memunmap(mpf, sizeof(*mpf));
933 late_initcall(update_mp_table);