2 * linux/arch/x86_64/entry.S
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
6 * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
10 * entry.S contains the system-call and fault low-level handling routines.
12 * Some of this is documented in Documentation/x86/entry_64.txt
14 * NOTE: This code handles signal-recognition, which happens every time
15 * after an interrupt and after each system call.
17 * Normal syscalls and interrupts don't save a full stack frame, this is
18 * only done for syscall tracing, signals or fork/exec et.al.
20 * A note on terminology:
21 * - top of stack: Architecture defined interrupt frame from SS to RIP
22 * at the top of the kernel process stack.
23 * - partial stack frame: partially saved registers up to R11.
24 * - full stack frame: Like partial stack frame, but all register saved.
27 * - CFI macros are used to generate dwarf2 unwind information for better
28 * backtraces. They don't change any code.
29 * - SAVE_ALL/RESTORE_ALL - Save/restore all registers
30 * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
31 * There are unfortunately lots of special cases where some registers
32 * not touched. The macro is a big mess that should be cleaned up.
33 * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
34 * Gives a full stack frame.
35 * - ENTRY/END Define functions in the symbol table.
36 * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
37 * frame that is otherwise undefined after a SYSCALL
38 * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
39 * - idtentry - Define exception entry points.
42 #include <linux/linkage.h>
43 #include <asm/segment.h>
44 #include <asm/cache.h>
45 #include <asm/errno.h>
46 #include <asm/dwarf2.h>
47 #include <asm/calling.h>
48 #include <asm/asm-offsets.h>
50 #include <asm/unistd.h>
51 #include <asm/thread_info.h>
52 #include <asm/hw_irq.h>
53 #include <asm/page_types.h>
54 #include <asm/irqflags.h>
55 #include <asm/paravirt.h>
56 #include <asm/percpu.h>
58 #include <asm/context_tracking.h>
60 #include <asm/pgtable_types.h>
61 #include <linux/err.h>
63 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
64 #include <linux/elf-em.h>
65 #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
66 #define __AUDIT_ARCH_64BIT 0x80000000
67 #define __AUDIT_ARCH_LE 0x40000000
70 .section .entry.text, "ax"
73 #ifndef CONFIG_PREEMPT
74 #define retint_kernel retint_restore_args
77 #ifdef CONFIG_PARAVIRT
78 ENTRY(native_usergs_sysret64)
81 ENDPROC(native_usergs_sysret64)
82 #endif /* CONFIG_PARAVIRT */
85 .macro TRACE_IRQS_IRETQ offset=ARGOFFSET
86 #ifdef CONFIG_TRACE_IRQFLAGS
87 bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
95 * When dynamic function tracer is enabled it will add a breakpoint
96 * to all locations that it is about to modify, sync CPUs, update
97 * all the code, sync CPUs, then remove the breakpoints. In this time
98 * if lockdep is enabled, it might jump back into the debug handler
99 * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
101 * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
102 * make sure the stack pointer does not get reset back to the top
103 * of the debug stack, and instead just reuses the current stack.
105 #if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
107 .macro TRACE_IRQS_OFF_DEBUG
108 call debug_stack_set_zero
110 call debug_stack_reset
113 .macro TRACE_IRQS_ON_DEBUG
114 call debug_stack_set_zero
116 call debug_stack_reset
119 .macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET
120 bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
127 # define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF
128 # define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON
129 # define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ
133 * C code is not supposed to know about undefined top of stack. Every time
134 * a C function with an pt_regs argument is called from the SYSCALL based
135 * fast path FIXUP_TOP_OF_STACK is needed.
136 * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
140 /* %rsp:at FRAMEEND */
141 .macro FIXUP_TOP_OF_STACK tmp offset=0
142 movq PER_CPU_VAR(old_rsp),\tmp
143 movq \tmp,RSP+\offset(%rsp)
144 movq $__USER_DS,SS+\offset(%rsp)
145 movq $__USER_CS,CS+\offset(%rsp)
146 movq $-1,RCX+\offset(%rsp)
147 movq R11+\offset(%rsp),\tmp /* get eflags */
148 movq \tmp,EFLAGS+\offset(%rsp)
151 .macro RESTORE_TOP_OF_STACK tmp offset=0
152 movq RSP+\offset(%rsp),\tmp
153 movq \tmp,PER_CPU_VAR(old_rsp)
154 movq EFLAGS+\offset(%rsp),\tmp
155 movq \tmp,R11+\offset(%rsp)
158 .macro FAKE_STACK_FRAME child_rip
159 /* push in order ss, rsp, eflags, cs, rip */
161 pushq_cfi $__KERNEL_DS /* ss */
162 /*CFI_REL_OFFSET ss,0*/
163 pushq_cfi %rax /* rsp */
165 pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) /* eflags - interrupts on */
166 /*CFI_REL_OFFSET rflags,0*/
167 pushq_cfi $__KERNEL_CS /* cs */
168 /*CFI_REL_OFFSET cs,0*/
169 pushq_cfi \child_rip /* rip */
171 pushq_cfi %rax /* orig rax */
174 .macro UNFAKE_STACK_FRAME
176 CFI_ADJUST_CFA_OFFSET -(6*8)
180 * initial frame state for interrupts (and exceptions without error code)
182 .macro EMPTY_FRAME start=1 offset=0
186 CFI_DEF_CFA rsp,8+\offset
188 CFI_DEF_CFA_OFFSET 8+\offset
193 * initial frame state for interrupts (and exceptions without error code)
195 .macro INTR_FRAME start=1 offset=0
196 EMPTY_FRAME \start, SS+8+\offset-RIP
197 /*CFI_REL_OFFSET ss, SS+\offset-RIP*/
198 CFI_REL_OFFSET rsp, RSP+\offset-RIP
199 /*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
200 /*CFI_REL_OFFSET cs, CS+\offset-RIP*/
201 CFI_REL_OFFSET rip, RIP+\offset-RIP
205 * initial frame state for exceptions with error code (and interrupts
206 * with vector already pushed)
208 .macro XCPT_FRAME start=1 offset=0
209 INTR_FRAME \start, RIP+\offset-ORIG_RAX
210 /*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
214 * frame that enables calling into C.
216 .macro PARTIAL_FRAME start=1 offset=0
217 XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
218 CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
219 CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
220 CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
221 CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
222 CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
223 CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
224 CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
225 CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
226 CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
230 * frame that enables passing a complete pt_regs to a C function.
232 .macro DEFAULT_FRAME start=1 offset=0
233 PARTIAL_FRAME \start, R11+\offset-R15
234 CFI_REL_OFFSET rbx, RBX+\offset
235 CFI_REL_OFFSET rbp, RBP+\offset
236 CFI_REL_OFFSET r12, R12+\offset
237 CFI_REL_OFFSET r13, R13+\offset
238 CFI_REL_OFFSET r14, R14+\offset
239 CFI_REL_OFFSET r15, R15+\offset
242 /* save partial stack frame */
245 /* start from rbp in pt_regs and jump over */
246 movq_cfi rdi, (RDI-RBP)
247 movq_cfi rsi, (RSI-RBP)
248 movq_cfi rdx, (RDX-RBP)
249 movq_cfi rcx, (RCX-RBP)
250 movq_cfi rax, (RAX-RBP)
251 movq_cfi r8, (R8-RBP)
252 movq_cfi r9, (R9-RBP)
253 movq_cfi r10, (R10-RBP)
254 movq_cfi r11, (R11-RBP)
256 /* Save rbp so that we can unwind from get_irq_regs() */
259 /* Save previous stack value */
262 leaq -RBP(%rsp),%rdi /* arg1 for handler */
263 testl $3, CS-RBP(%rsi)
267 * irq_count is used to check if a CPU is already on an interrupt stack
268 * or not. While this is essentially redundant with preempt_count it is
269 * a little cheaper to use a separate counter in the PDA (short of
270 * moving irq_enter into assembly, which would be too much work)
272 1: incl PER_CPU_VAR(irq_count)
273 cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
274 CFI_DEF_CFA_REGISTER rsi
276 /* Store previous stack value */
278 CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \
279 0x77 /* DW_OP_breg7 */, 0, \
280 0x06 /* DW_OP_deref */, \
281 0x08 /* DW_OP_const1u */, SS+8-RBP, \
282 0x22 /* DW_OP_plus */
283 /* We entered an interrupt context - irqs are off: */
287 /* save complete stack frame */
288 .pushsection .kprobes.text, "ax"
308 movl $MSR_GS_BASE,%ecx
311 js 1f /* negative -> in kernel */
320 * A newly forked process directly context switches into this address.
322 * rdi: prev task we switched from
327 LOCK ; btr $TIF_FORK,TI_flags(%r8)
330 popfq_cfi # reset kernel eflags
332 call schedule_tail # rdi: 'prev' task parameter
334 GET_THREAD_INFO(%rcx)
338 testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
341 testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
342 jnz int_ret_from_sys_call
344 RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
345 jmp ret_from_sys_call # go to the SYSRET fastpath
348 subq $REST_SKIP, %rsp # leave space for volatiles
349 CFI_ADJUST_CFA_OFFSET REST_SKIP
354 jmp int_ret_from_sys_call
359 * System call entry. Up to 6 arguments in registers are supported.
361 * SYSCALL does not save anything on the stack and does not change the
362 * stack pointer. However, it does mask the flags register for us, so
363 * CLD and CLAC are not needed.
368 * rax system call number
370 * rcx return address for syscall/sysret, C arg3
373 * r10 arg3 (--> moved to rcx for C)
376 * r11 eflags for syscall/sysret, temporary for C
377 * r12-r15,rbp,rbx saved by C code, not touched.
379 * Interrupts are off on entry.
380 * Only called from user space.
382 * XXX if we had a free scratch register we could save the RSP into the stack frame
383 * and report it properly in ps. Unfortunately we haven't.
385 * When user can change the frames always force IRET. That is because
386 * it deals with uncanonical addresses better. SYSRET has trouble
387 * with them due to bugs in both AMD and Intel CPUs.
393 CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
395 /*CFI_REGISTER rflags,r11*/
398 * A hypervisor implementation might want to use a label
399 * after the swapgs, so that it can do the swapgs
400 * for the guest and jump here on syscall.
402 GLOBAL(system_call_after_swapgs)
404 movq %rsp,PER_CPU_VAR(old_rsp)
405 movq PER_CPU_VAR(kernel_stack),%rsp
407 * No need to follow this irqs off/on section - it's straight
410 ENABLE_INTERRUPTS(CLBR_NONE)
412 movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
413 movq %rcx,RIP-ARGOFFSET(%rsp)
414 CFI_REL_OFFSET rip,RIP-ARGOFFSET
415 testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
417 system_call_fastpath:
418 #if __SYSCALL_MASK == ~0
419 cmpq $__NR_syscall_max,%rax
421 andl $__SYSCALL_MASK,%eax
422 cmpl $__NR_syscall_max,%eax
426 call *sys_call_table(,%rax,8) # XXX: rip relative
427 movq %rax,RAX-ARGOFFSET(%rsp)
429 * Syscall return path ending with SYSRET (fast path)
430 * Has incomplete stack frame and undefined top of stack.
433 movl $_TIF_ALLWORK_MASK,%edi
437 DISABLE_INTERRUPTS(CLBR_NONE)
439 movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
444 * sysretq will re-enable interrupts:
447 movq RIP-ARGOFFSET(%rsp),%rcx
449 RESTORE_ARGS 1,-ARG_SKIP,0
450 /*CFI_REGISTER rflags,r11*/
451 movq PER_CPU_VAR(old_rsp), %rsp
455 /* Handle reschedules */
456 /* edx: work, edi: workmask */
458 bt $TIF_NEED_RESCHED,%edx
461 ENABLE_INTERRUPTS(CLBR_NONE)
467 /* Handle a signal */
470 ENABLE_INTERRUPTS(CLBR_NONE)
471 #ifdef CONFIG_AUDITSYSCALL
472 bt $TIF_SYSCALL_AUDIT,%edx
476 * We have a signal, or exit tracing or single-step.
477 * These all wind up with the iret return path anyway,
478 * so just join that path right now.
480 FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
481 jmp int_check_syscall_exit_work
484 movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
485 jmp ret_from_sys_call
487 #ifdef CONFIG_AUDITSYSCALL
489 * Fast path for syscall audit without full syscall trace.
490 * We just call __audit_syscall_entry() directly, and then
491 * jump back to the normal fast path.
494 movq %r10,%r9 /* 6th arg: 4th syscall arg */
495 movq %rdx,%r8 /* 5th arg: 3rd syscall arg */
496 movq %rsi,%rcx /* 4th arg: 2nd syscall arg */
497 movq %rdi,%rdx /* 3rd arg: 1st syscall arg */
498 movq %rax,%rsi /* 2nd arg: syscall number */
499 movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */
500 call __audit_syscall_entry
501 LOAD_ARGS 0 /* reload call-clobbered registers */
502 jmp system_call_fastpath
505 * Return fast path for syscall audit. Call __audit_syscall_exit()
506 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
510 movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
511 cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */
512 setbe %al /* 1 if so, 0 if not */
513 movzbl %al,%edi /* zero-extend that into %edi */
514 call __audit_syscall_exit
515 movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
517 #endif /* CONFIG_AUDITSYSCALL */
519 /* Do syscall tracing */
521 #ifdef CONFIG_AUDITSYSCALL
522 testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
526 movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
527 FIXUP_TOP_OF_STACK %rdi
529 call syscall_trace_enter
531 * Reload arg registers from stack in case ptrace changed them.
532 * We don't reload %rax because syscall_trace_enter() returned
533 * the value it wants us to use in the table lookup.
535 LOAD_ARGS ARGOFFSET, 1
537 #if __SYSCALL_MASK == ~0
538 cmpq $__NR_syscall_max,%rax
540 andl $__SYSCALL_MASK,%eax
541 cmpl $__NR_syscall_max,%eax
543 ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
544 movq %r10,%rcx /* fixup for C */
545 call *sys_call_table(,%rax,8)
546 movq %rax,RAX-ARGOFFSET(%rsp)
547 /* Use IRET because user could have changed frame */
550 * Syscall return path ending with IRET.
551 * Has correct top of stack, but partial stack frame.
553 GLOBAL(int_ret_from_sys_call)
554 DISABLE_INTERRUPTS(CLBR_NONE)
556 movl $_TIF_ALLWORK_MASK,%edi
557 /* edi: mask to check */
558 GLOBAL(int_with_check)
560 GET_THREAD_INFO(%rcx)
561 movl TI_flags(%rcx),%edx
564 andl $~TS_COMPAT,TI_status(%rcx)
567 /* Either reschedule or signal or syscall exit tracking needed. */
568 /* First do a reschedule test. */
569 /* edx: work, edi: workmask */
571 bt $TIF_NEED_RESCHED,%edx
574 ENABLE_INTERRUPTS(CLBR_NONE)
578 DISABLE_INTERRUPTS(CLBR_NONE)
582 /* handle signals and tracing -- both require a full stack frame */
585 ENABLE_INTERRUPTS(CLBR_NONE)
586 int_check_syscall_exit_work:
588 /* Check for syscall exit trace */
589 testl $_TIF_WORK_SYSCALL_EXIT,%edx
592 leaq 8(%rsp),%rdi # &ptregs -> arg1
593 call syscall_trace_leave
595 andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
599 testl $_TIF_DO_NOTIFY_MASK,%edx
601 movq %rsp,%rdi # &ptregs -> arg1
602 xorl %esi,%esi # oldset -> arg2
603 call do_notify_resume
604 1: movl $_TIF_WORK_MASK,%edi
607 DISABLE_INTERRUPTS(CLBR_NONE)
613 .macro FORK_LIKE func
616 popq %r11 /* save return address */
619 pushq %r11 /* put it back on stack */
620 FIXUP_TOP_OF_STACK %r11, 8
621 DEFAULT_FRAME 0 8 /* offset 8: return address */
623 RESTORE_TOP_OF_STACK %r11, 8
624 ret $REST_SKIP /* pop extended registers */
629 .macro FIXED_FRAME label,func
632 PARTIAL_FRAME 0 8 /* offset 8: return address */
633 FIXUP_TOP_OF_STACK %r11, 8-ARGOFFSET
635 RESTORE_TOP_OF_STACK %r11, 8-ARGOFFSET
644 FIXED_FRAME stub_iopl, sys_iopl
646 ENTRY(ptregscall_common)
647 DEFAULT_FRAME 1 8 /* offset 8: return address */
648 RESTORE_TOP_OF_STACK %r11, 8
649 movq_cfi_restore R15+8, r15
650 movq_cfi_restore R14+8, r14
651 movq_cfi_restore R13+8, r13
652 movq_cfi_restore R12+8, r12
653 movq_cfi_restore RBP+8, rbp
654 movq_cfi_restore RBX+8, rbx
655 ret $REST_SKIP /* pop extended registers */
657 END(ptregscall_common)
664 FIXUP_TOP_OF_STACK %r11
668 jmp int_ret_from_sys_call
673 * sigreturn is special because it needs to restore all registers on return.
674 * This cannot be done with SYSRET, so use the IRET return path instead.
676 ENTRY(stub_rt_sigreturn)
681 FIXUP_TOP_OF_STACK %r11
682 call sys_rt_sigreturn
683 movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
685 jmp int_ret_from_sys_call
687 END(stub_rt_sigreturn)
689 #ifdef CONFIG_X86_X32_ABI
690 ENTRY(stub_x32_rt_sigreturn)
695 FIXUP_TOP_OF_STACK %r11
696 call sys32_x32_rt_sigreturn
697 movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
699 jmp int_ret_from_sys_call
701 END(stub_x32_rt_sigreturn)
703 ENTRY(stub_x32_execve)
708 FIXUP_TOP_OF_STACK %r11
709 call compat_sys_execve
710 RESTORE_TOP_OF_STACK %r11
713 jmp int_ret_from_sys_call
720 * Build the entry stubs and pointer table with some assembler magic.
721 * We pack 7 stubs into a single 32-byte chunk, which will fit in a
722 * single cache line on all modern x86 implementations.
724 .section .init.rodata,"a"
728 .p2align CONFIG_X86_L1_CACHE_SHIFT
729 ENTRY(irq_entries_start)
731 vector=FIRST_EXTERNAL_VECTOR
732 .rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
735 .if vector < NR_VECTORS
736 .if vector <> FIRST_EXTERNAL_VECTOR
737 CFI_ADJUST_CFA_OFFSET -8
739 1: pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */
740 .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
749 2: jmp common_interrupt
752 END(irq_entries_start)
759 * Interrupt entry/exit.
761 * Interrupt entry points save only callee clobbered registers in fast path.
763 * Entry runs with interrupts off.
766 /* 0(%rsp): ~(interrupt number) */
767 .macro interrupt func
768 /* reserve pt_regs for scratch regs and rbp */
769 subq $ORIG_RAX-RBP, %rsp
770 CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP
776 * Interrupt entry/exit should be protected against kprobes
778 .pushsection .kprobes.text, "ax"
780 * The interrupt stubs push (~vector+0x80) onto the stack and
781 * then jump to common_interrupt.
783 .p2align CONFIG_X86_L1_CACHE_SHIFT
787 addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
789 /* 0(%rsp): old_rsp-ARGOFFSET */
791 DISABLE_INTERRUPTS(CLBR_NONE)
793 decl PER_CPU_VAR(irq_count)
795 /* Restore saved previous stack */
797 CFI_DEF_CFA rsi,SS+8-RBP /* reg/off reset after def_cfa_expr */
798 leaq ARGOFFSET-RBP(%rsi), %rsp
799 CFI_DEF_CFA_REGISTER rsp
800 CFI_ADJUST_CFA_OFFSET RBP-ARGOFFSET
803 GET_THREAD_INFO(%rcx)
804 testl $3,CS-ARGOFFSET(%rsp)
807 /* Interrupt came from user space */
809 * Has a correct top of stack, but a partial stack frame
810 * %rcx: thread info. Interrupts off.
812 retint_with_reschedule:
813 movl $_TIF_WORK_MASK,%edi
816 movl TI_flags(%rcx),%edx
821 retint_swapgs: /* return to user-space */
823 * The iretq could re-enable interrupts:
825 DISABLE_INTERRUPTS(CLBR_ANY)
830 retint_restore_args: /* return to kernel space */
831 DISABLE_INTERRUPTS(CLBR_ANY)
833 * The iretq could re-enable interrupts:
841 * Are we returning to a stack segment from the LDT? Note: in
842 * 64-bit mode SS:RSP on the exception stack is always valid.
844 #ifdef CONFIG_X86_ESPFIX64
845 testb $4,(SS-RIP)(%rsp)
851 _ASM_EXTABLE(irq_return_iret, bad_iret)
853 #ifdef CONFIG_PARAVIRT
856 _ASM_EXTABLE(native_iret, bad_iret)
859 #ifdef CONFIG_X86_ESPFIX64
864 movq PER_CPU_VAR(espfix_waddr),%rdi
865 movq %rax,(0*8)(%rdi) /* RAX */
866 movq (2*8)(%rsp),%rax /* RIP */
867 movq %rax,(1*8)(%rdi)
868 movq (3*8)(%rsp),%rax /* CS */
869 movq %rax,(2*8)(%rdi)
870 movq (4*8)(%rsp),%rax /* RFLAGS */
871 movq %rax,(3*8)(%rdi)
872 movq (6*8)(%rsp),%rax /* SS */
873 movq %rax,(5*8)(%rdi)
874 movq (5*8)(%rsp),%rax /* RSP */
875 movq %rax,(4*8)(%rdi)
876 andl $0xffff0000,%eax
878 orq PER_CPU_VAR(espfix_stack),%rax
888 * The iret traps when the %cs or %ss being restored is bogus.
889 * We've lost the original trap vector and error code.
890 * #GPF is the most likely one to get for an invalid selector.
891 * So pretend we completed the iret and took the #GPF in user mode.
893 * We are now running with the kernel GS after exception recovery.
894 * But error_entry expects us to have user GS to match the user %cs,
900 jmp general_protection
904 /* edi: workmask, edx: work */
907 bt $TIF_NEED_RESCHED,%edx
910 ENABLE_INTERRUPTS(CLBR_NONE)
914 GET_THREAD_INFO(%rcx)
915 DISABLE_INTERRUPTS(CLBR_NONE)
920 testl $_TIF_DO_NOTIFY_MASK,%edx
923 ENABLE_INTERRUPTS(CLBR_NONE)
925 movq $-1,ORIG_RAX(%rsp)
926 xorl %esi,%esi # oldset
927 movq %rsp,%rdi # &pt_regs
928 call do_notify_resume
930 DISABLE_INTERRUPTS(CLBR_NONE)
932 GET_THREAD_INFO(%rcx)
933 jmp retint_with_reschedule
935 #ifdef CONFIG_PREEMPT
936 /* Returning to kernel space. Check if we need preemption */
937 /* rcx: threadinfo. interrupts off. */
939 cmpl $0,PER_CPU_VAR(__preempt_count)
940 jnz retint_restore_args
941 bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
942 jnc retint_restore_args
943 call preempt_schedule_irq
947 END(common_interrupt)
950 * If IRET takes a fault on the espfix stack, then we
951 * end up promoting it to a doublefault. In that case,
952 * modify the stack to make it look like we just entered
953 * the #GP handler from user space, similar to bad_iret.
955 #ifdef CONFIG_X86_ESPFIX64
959 movq RSP(%rdi),%rax /* Trap on the espfix stack? */
960 sarq $PGDIR_SHIFT,%rax
961 cmpl $ESPFIX_PGD_ENTRY,%eax
962 jne do_double_fault /* No, just deliver the fault */
963 cmpl $__KERNEL_CS,CS(%rdi)
966 cmpq $irq_return_iret,%rax
967 #ifdef CONFIG_PARAVIRT
969 cmpq $native_iret,%rax
971 jne do_double_fault /* This shouldn't happen... */
973 movq PER_CPU_VAR(kernel_stack),%rax
974 subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */
976 movq $0,(%rax) /* Missing (lost) #GP error code */
977 movq $general_protection,RIP(%rdi)
980 END(__do_double_fault)
982 # define __do_double_fault do_double_fault
986 * End of kprobes section
993 .macro apicinterrupt3 num sym do_sym
1005 #ifdef CONFIG_TRACING
1006 #define trace(sym) trace_##sym
1007 #define smp_trace(sym) smp_trace_##sym
1009 .macro trace_apicinterrupt num sym
1010 apicinterrupt3 \num trace(\sym) smp_trace(\sym)
1013 .macro trace_apicinterrupt num sym do_sym
1017 .macro apicinterrupt num sym do_sym
1018 apicinterrupt3 \num \sym \do_sym
1019 trace_apicinterrupt \num \sym
1023 apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
1024 irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
1025 apicinterrupt3 REBOOT_VECTOR \
1026 reboot_interrupt smp_reboot_interrupt
1029 #ifdef CONFIG_X86_UV
1030 apicinterrupt3 UV_BAU_MESSAGE \
1031 uv_bau_message_intr1 uv_bau_message_interrupt
1033 apicinterrupt LOCAL_TIMER_VECTOR \
1034 apic_timer_interrupt smp_apic_timer_interrupt
1035 apicinterrupt X86_PLATFORM_IPI_VECTOR \
1036 x86_platform_ipi smp_x86_platform_ipi
1038 #ifdef CONFIG_HAVE_KVM
1039 apicinterrupt3 POSTED_INTR_VECTOR \
1040 kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
1043 #ifdef CONFIG_X86_MCE_THRESHOLD
1044 apicinterrupt THRESHOLD_APIC_VECTOR \
1045 threshold_interrupt smp_threshold_interrupt
1048 #ifdef CONFIG_X86_THERMAL_VECTOR
1049 apicinterrupt THERMAL_APIC_VECTOR \
1050 thermal_interrupt smp_thermal_interrupt
1054 apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
1055 call_function_single_interrupt smp_call_function_single_interrupt
1056 apicinterrupt CALL_FUNCTION_VECTOR \
1057 call_function_interrupt smp_call_function_interrupt
1058 apicinterrupt RESCHEDULE_VECTOR \
1059 reschedule_interrupt smp_reschedule_interrupt
1062 apicinterrupt ERROR_APIC_VECTOR \
1063 error_interrupt smp_error_interrupt
1064 apicinterrupt SPURIOUS_APIC_VECTOR \
1065 spurious_interrupt smp_spurious_interrupt
1067 #ifdef CONFIG_IRQ_WORK
1068 apicinterrupt IRQ_WORK_VECTOR \
1069 irq_work_interrupt smp_irq_work_interrupt
1073 * Exception entry points.
1075 #define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
1077 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
1080 .if \shift_ist != -1 && \paranoid == 0
1081 .error "using shift_ist requires paranoid=1"
1091 PARAVIRT_ADJUST_EXCEPTION_FRAME
1093 .ifeq \has_error_code
1094 pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
1097 subq $ORIG_RAX-R15, %rsp
1098 CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
1109 .if \shift_ist != -1
1110 TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */
1116 movq %rsp,%rdi /* pt_regs pointer */
1119 movq ORIG_RAX(%rsp),%rsi /* get error code */
1120 movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
1122 xorl %esi,%esi /* no error code */
1125 .if \shift_ist != -1
1126 subq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist)
1131 .if \shift_ist != -1
1132 addq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist)
1136 jmp paranoid_exit /* %ebx: no swapgs flag */
1138 jmp error_exit /* %ebx: no swapgs flag */
1145 #ifdef CONFIG_TRACING
1146 .macro trace_idtentry sym do_sym has_error_code:req
1147 idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
1148 idtentry \sym \do_sym has_error_code=\has_error_code
1151 .macro trace_idtentry sym do_sym has_error_code:req
1152 idtentry \sym \do_sym has_error_code=\has_error_code
1156 idtentry divide_error do_divide_error has_error_code=0
1157 idtentry overflow do_overflow has_error_code=0
1158 idtentry bounds do_bounds has_error_code=0
1159 idtentry invalid_op do_invalid_op has_error_code=0
1160 idtentry device_not_available do_device_not_available has_error_code=0
1161 idtentry double_fault __do_double_fault has_error_code=1 paranoid=1
1162 idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
1163 idtentry invalid_TSS do_invalid_TSS has_error_code=1
1164 idtentry segment_not_present do_segment_not_present has_error_code=1
1165 idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
1166 idtentry coprocessor_error do_coprocessor_error has_error_code=0
1167 idtentry alignment_check do_alignment_check has_error_code=1
1168 idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
1171 /* Reload gs selector with exception handling */
1172 /* edi: new selector */
1173 ENTRY(native_load_gs_index)
1176 DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
1180 2: mfence /* workaround */
1185 END(native_load_gs_index)
1187 _ASM_EXTABLE(gs_change,bad_gs)
1188 .section .fixup,"ax"
1189 /* running with kernelgs */
1191 SWAPGS /* switch back to user gs */
1197 /* Call softirq on interrupt stack. Interrupts are off. */
1198 ENTRY(do_softirq_own_stack)
1201 CFI_REL_OFFSET rbp,0
1203 CFI_DEF_CFA_REGISTER rbp
1204 incl PER_CPU_VAR(irq_count)
1205 cmove PER_CPU_VAR(irq_stack_ptr),%rsp
1206 push %rbp # backlink for old unwinder
1210 CFI_DEF_CFA_REGISTER rsp
1211 CFI_ADJUST_CFA_OFFSET -8
1212 decl PER_CPU_VAR(irq_count)
1215 END(do_softirq_own_stack)
1218 idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
1221 * A note on the "critical region" in our callback handler.
1222 * We want to avoid stacking callback handlers due to events occurring
1223 * during handling of the last event. To do this, we keep events disabled
1224 * until we've done all processing. HOWEVER, we must enable events before
1225 * popping the stack frame (can't be done atomically) and so it would still
1226 * be possible to get enough handler activations to overflow the stack.
1227 * Although unlikely, bugs of that kind are hard to track down, so we'd
1228 * like to avoid the possibility.
1229 * So, on entry to the handler we detect whether we interrupted an
1230 * existing activation in its critical region -- if so, we pop the current
1231 * activation and restart the handler using the previous one.
1233 ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
1236 * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
1237 * see the correct pointer to the pt_regs
1239 movq %rdi, %rsp # we don't return, adjust the stack frame
1242 11: incl PER_CPU_VAR(irq_count)
1244 CFI_DEF_CFA_REGISTER rbp
1245 cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
1246 pushq %rbp # backlink for old unwinder
1247 call xen_evtchn_do_upcall
1249 CFI_DEF_CFA_REGISTER rsp
1250 decl PER_CPU_VAR(irq_count)
1253 END(xen_do_hypervisor_callback)
1256 * Hypervisor uses this for application faults while it executes.
1257 * We get here for two reasons:
1258 * 1. Fault while reloading DS, ES, FS or GS
1259 * 2. Fault while executing IRET
1260 * Category 1 we do not need to fix up as Xen has already reloaded all segment
1261 * registers that could be reloaded and zeroed the others.
1262 * Category 2 we fix up by killing the current process. We cannot use the
1263 * normal Linux return path in this case because if we use the IRET hypercall
1264 * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
1265 * We distinguish between categories by comparing each saved segment register
1266 * with its current contents: any discrepancy means we in category 1.
1268 ENTRY(xen_failsafe_callback)
1270 /*CFI_REL_OFFSET gs,GS*/
1271 /*CFI_REL_OFFSET fs,FS*/
1272 /*CFI_REL_OFFSET es,ES*/
1273 /*CFI_REL_OFFSET ds,DS*/
1274 CFI_REL_OFFSET r11,8
1275 CFI_REL_OFFSET rcx,0
1289 /* All segments match their saved values => Category 2 (Bad IRET). */
1295 CFI_ADJUST_CFA_OFFSET -0x30
1296 pushq_cfi $0 /* RIP */
1299 jmp general_protection
1301 1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
1307 CFI_ADJUST_CFA_OFFSET -0x30
1308 pushq_cfi $-1 /* orig_ax = -1 => not a system call */
1312 END(xen_failsafe_callback)
1314 apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
1315 xen_hvm_callback_vector xen_evtchn_do_upcall
1317 #endif /* CONFIG_XEN */
1319 #if IS_ENABLED(CONFIG_HYPERV)
1320 apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
1321 hyperv_callback_vector hyperv_vector_handler
1322 #endif /* CONFIG_HYPERV */
1325 * Some functions should be protected against kprobes
1327 .pushsection .kprobes.text, "ax"
1329 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
1330 idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
1331 idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1
1333 idtentry xen_debug do_debug has_error_code=0
1334 idtentry xen_int3 do_int3 has_error_code=0
1335 idtentry xen_stack_segment do_stack_segment has_error_code=1
1337 idtentry general_protection do_general_protection has_error_code=1
1338 trace_idtentry page_fault do_page_fault has_error_code=1
1339 #ifdef CONFIG_KVM_GUEST
1340 idtentry async_page_fault do_async_page_fault has_error_code=1
1342 #ifdef CONFIG_X86_MCE
1343 idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
1347 * "Paranoid" exit path from exception stack.
1348 * Paranoid because this is used by NMIs and cannot take
1349 * any kernel state for granted.
1350 * We don't do kernel preemption checks here, because only
1351 * NMI should be common and it does not enable IRQs and
1352 * cannot get reschedule ticks.
1354 * "trace" is 0 for the NMI handler only, because irq-tracing
1355 * is fundamentally NMI-unsafe. (we cannot change the soft and
1356 * hard flags at once, atomically)
1359 /* ebx: no swapgs flag */
1360 ENTRY(paranoid_exit)
1362 DISABLE_INTERRUPTS(CLBR_NONE)
1363 TRACE_IRQS_OFF_DEBUG
1364 testl %ebx,%ebx /* swapgs needed? */
1365 jnz paranoid_restore
1367 jnz paranoid_userspace
1374 TRACE_IRQS_IRETQ_DEBUG 0
1378 GET_THREAD_INFO(%rcx)
1379 movl TI_flags(%rcx),%ebx
1380 andl $_TIF_WORK_MASK,%ebx
1382 movq %rsp,%rdi /* &pt_regs */
1384 movq %rax,%rsp /* switch stack for scheduling */
1385 testl $_TIF_NEED_RESCHED,%ebx
1386 jnz paranoid_schedule
1387 movl %ebx,%edx /* arg3: thread flags */
1389 ENABLE_INTERRUPTS(CLBR_NONE)
1390 xorl %esi,%esi /* arg2: oldset */
1391 movq %rsp,%rdi /* arg1: &pt_regs */
1392 call do_notify_resume
1393 DISABLE_INTERRUPTS(CLBR_NONE)
1395 jmp paranoid_userspace
1398 ENABLE_INTERRUPTS(CLBR_ANY)
1400 DISABLE_INTERRUPTS(CLBR_ANY)
1402 jmp paranoid_userspace
1407 * Exception entry point. This expects an error code/orig_rax on the stack.
1408 * returns in "no swapgs flag" in %ebx.
1412 CFI_ADJUST_CFA_OFFSET 15*8
1413 /* oldrax contains error code */
1432 je error_kernelspace
1440 * There are two places in the kernel that can potentially fault with
1441 * usergs. Handle them here. The exception handlers after iret run with
1442 * kernel gs again, so don't set the user space flag. B stepping K8s
1443 * sometimes report an truncated RIP for IRET exceptions returning to
1444 * compat mode. Check for these here too.
1448 leaq irq_return_iret(%rip),%rcx
1449 cmpq %rcx,RIP+8(%rsp)
1451 movl %ecx,%eax /* zero extend */
1452 cmpq %rax,RIP+8(%rsp)
1454 cmpq $gs_change,RIP+8(%rsp)
1459 /* Fix truncated RIP */
1460 movq %rcx,RIP+8(%rsp)
1466 /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
1471 DISABLE_INTERRUPTS(CLBR_NONE)
1473 GET_THREAD_INFO(%rcx)
1476 LOCKDEP_SYS_EXIT_IRQ
1477 movl TI_flags(%rcx),%edx
1478 movl $_TIF_WORK_MASK,%edi
1486 * Test if a given stack is an NMI stack or not.
1488 .macro test_in_nmi reg stack nmi_ret normal_ret
1491 subq $EXCEPTION_STKSZ, %\reg
1497 /* runs on exception stack */
1500 PARAVIRT_ADJUST_EXCEPTION_FRAME
1502 * We allow breakpoints in NMIs. If a breakpoint occurs, then
1503 * the iretq it performs will take us out of NMI context.
1504 * This means that we can have nested NMIs where the next
1505 * NMI is using the top of the stack of the previous NMI. We
1506 * can't let it execute because the nested NMI will corrupt the
1507 * stack of the previous NMI. NMI handlers are not re-entrant
1510 * To handle this case we do the following:
1511 * Check the a special location on the stack that contains
1512 * a variable that is set when NMIs are executing.
1513 * The interrupted task's stack is also checked to see if it
1515 * If the variable is not set and the stack is not the NMI
1517 * o Set the special variable on the stack
1518 * o Copy the interrupt frame into a "saved" location on the stack
1519 * o Copy the interrupt frame into a "copy" location on the stack
1520 * o Continue processing the NMI
1521 * If the variable is set or the previous stack is the NMI stack:
1522 * o Modify the "copy" location to jump to the repeate_nmi
1523 * o return back to the first NMI
1525 * Now on exit of the first NMI, we first clear the stack variable
1526 * The NMI stack will tell any nested NMIs at that point that it is
1527 * nested. Then we pop the stack normally with iret, and if there was
1528 * a nested NMI that updated the copy interrupt stack frame, a
1529 * jump will be made to the repeat_nmi code that will handle the second
1533 /* Use %rdx as out temp variable throughout */
1535 CFI_REL_OFFSET rdx, 0
1538 * If %cs was not the kernel segment, then the NMI triggered in user
1539 * space, which means it is definitely not nested.
1541 cmpl $__KERNEL_CS, 16(%rsp)
1545 * Check the special variable on the stack to see if NMIs are
1552 * Now test if the previous stack was an NMI stack.
1553 * We need the double check. We check the NMI stack to satisfy the
1554 * race when the first NMI clears the variable before returning.
1555 * We check the variable because the first NMI could be in a
1556 * breakpoint routine using a breakpoint stack.
1559 test_in_nmi rdx, 4*8(%rsp), nested_nmi, first_nmi
1564 * Do nothing if we interrupted the fixup in repeat_nmi.
1565 * It's about to repeat the NMI handler, so we are fine
1566 * with ignoring this one.
1568 movq $repeat_nmi, %rdx
1571 movq $end_repeat_nmi, %rdx
1576 /* Set up the interrupted NMIs stack to jump to repeat_nmi */
1577 leaq -1*8(%rsp), %rdx
1579 CFI_ADJUST_CFA_OFFSET 1*8
1580 leaq -10*8(%rsp), %rdx
1581 pushq_cfi $__KERNEL_DS
1584 pushq_cfi $__KERNEL_CS
1585 pushq_cfi $repeat_nmi
1587 /* Put stack back */
1589 CFI_ADJUST_CFA_OFFSET -6*8
1595 /* No need to check faults here */
1601 * Because nested NMIs will use the pushed location that we
1602 * stored in rdx, we must keep that space available.
1603 * Here's what our stack frame will look like:
1604 * +-------------------------+
1606 * | original Return RSP |
1607 * | original RFLAGS |
1610 * +-------------------------+
1611 * | temp storage for rdx |
1612 * +-------------------------+
1613 * | NMI executing variable |
1614 * +-------------------------+
1616 * | copied Return RSP |
1620 * +-------------------------+
1622 * | Saved Return RSP |
1626 * +-------------------------+
1628 * +-------------------------+
1630 * The saved stack frame is used to fix up the copied stack frame
1631 * that a nested NMI may change to make the interrupted NMI iret jump
1632 * to the repeat_nmi. The original stack frame and the temp storage
1633 * is also used by nested NMIs and can not be trusted on exit.
1635 /* Do not pop rdx, nested NMIs will corrupt that part of the stack */
1639 /* Set the NMI executing variable on the stack. */
1643 * Leave room for the "copied" frame
1646 CFI_ADJUST_CFA_OFFSET 5*8
1648 /* Copy the stack frame to the Saved frame */
1650 pushq_cfi 11*8(%rsp)
1652 CFI_DEF_CFA_OFFSET SS+8-RIP
1654 /* Everything up to here is safe from nested NMIs */
1657 * If there was a nested NMI, the first NMI's iret will return
1658 * here. But NMIs are still enabled and we can take another
1659 * nested NMI. The nested NMI checks the interrupted RIP to see
1660 * if it is between repeat_nmi and end_repeat_nmi, and if so
1661 * it will just return, as we are about to repeat an NMI anyway.
1662 * This makes it safe to copy to the stack frame that a nested
1667 * Update the stack variable to say we are still in NMI (the update
1668 * is benign for the non-repeat case, where 1 was pushed just above
1669 * to this very stack slot).
1673 /* Make another copy, this one may be modified by nested NMIs */
1675 CFI_ADJUST_CFA_OFFSET -10*8
1677 pushq_cfi -6*8(%rsp)
1680 CFI_DEF_CFA_OFFSET SS+8-RIP
1684 * Everything below this point can be preempted by a nested
1685 * NMI if the first NMI took an exception and reset our iret stack
1686 * so that we repeat another NMI.
1688 pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
1689 subq $ORIG_RAX-R15, %rsp
1690 CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
1692 * Use save_paranoid to handle SWAPGS, but no need to use paranoid_exit
1693 * as we should not be calling schedule in NMI context.
1694 * Even with normal interrupts enabled. An NMI should not be
1695 * setting NEED_RESCHED or anything that normal interrupts and
1696 * exceptions might do.
1702 * Save off the CR2 register. If we take a page fault in the NMI then
1703 * it could corrupt the CR2 value. If the NMI preempts a page fault
1704 * handler before it was able to read the CR2 register, and then the
1705 * NMI itself takes a page fault, the page fault that was preempted
1706 * will read the information from the NMI page fault and not the
1707 * origin fault. Save it off and restore it if it changes.
1708 * Use the r12 callee-saved register.
1712 /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
1717 /* Did the NMI take a page fault? Restore cr2 if it did */
1724 testl %ebx,%ebx /* swapgs needed? */
1729 /* Pop the extra iret frame at once */
1732 /* Clear the NMI executing stack variable */
1738 ENTRY(ignore_sysret)
1746 * End of kprobes section