arch/x86/include/asm/nospec-branch.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2
   3 #ifndef _ASM_X86_NOSPEC_BRANCH_H_
   4 #define _ASM_X86_NOSPEC_BRANCH_H_
   5
   6 #include <linux/static_key.h>
   7
   8 #include <asm/alternative.h>
   9 #include <asm/alternative-asm.h>
  10 #include <asm/cpufeatures.h>
  11 #include <asm/msr-index.h>
  12
  13 /*
  14  * This should be used immediately before a retpoline alternative. It tells
  15  * objtool where the retpolines are so that it can make sense of the control
  16  * flow by just reading the original instruction(s) and ignoring the
  17  * alternatives.
  18  */
  19 #define ANNOTATE_NOSPEC_ALTERNATIVE \
  20         ANNOTATE_IGNORE_ALTERNATIVE
  21
  22 /*
  23  * Fill the CPU return stack buffer.
  24  *
  25  * Each entry in the RSB, if used for a speculative 'ret', contains an
  26  * infinite 'pause; lfence; jmp' loop to capture speculative execution.
  27  *
  28  * This is required in various cases for retpoline and IBRS-based
  29  * mitigations for the Spectre variant 2 vulnerability. Sometimes to
  30  * eliminate potentially bogus entries from the RSB, and sometimes
  31  * purely to ensure that it doesn't get empty, which on some CPUs would
  32  * allow predictions from other (unwanted!) sources to be used.
  33  *
  34  * We define a CPP macro such that it can be used from both .S files and
  35  * inline assembly. It's possible to do a .macro and then include that
  36  * from C via asm(".include <asm/nospec-branch.h>") but let's not go there.
  37  */
  38
  39 #define RSB_CLEAR_LOOPS         32      /* To forcibly overwrite all entries */
  40
  41 /*
  42  * Google experimented with loop-unrolling and this turned out to be
  43  * the optimal version — two calls, each with their own speculation
  44  * trap should their return address end up getting used, in a loop.
  45  */
  46 #define __FILL_RETURN_BUFFER(reg, nr, sp)       \
  47         mov     $(nr/2), reg;                   \
  48 771:                                            \
  49         call    772f;                           \
  50 773:    /* speculation trap */                  \
  51         pause;                                  \
  52         lfence;                                 \
  53         jmp     773b;                           \
  54 772:                                            \
  55         call    774f;                           \
  56 775:    /* speculation trap */                  \
  57         pause;                                  \
  58         lfence;                                 \
  59         jmp     775b;                           \
  60 774:                                            \
  61         dec     reg;                            \
  62         jnz     771b;                           \
  63         add     $(BITS_PER_LONG/8) * nr, sp;
  64
  65 #ifdef __ASSEMBLY__
  66
  67 /*
  68  * This should be used immediately before an indirect jump/call. It tells
  69  * objtool the subsequent indirect jump/call is vouched safe for retpoline
  70  * builds.
  71  */
  72 .macro ANNOTATE_RETPOLINE_SAFE
  73         .Lannotate_\@:
  74         .pushsection .discard.retpoline_safe
  75         _ASM_PTR .Lannotate_\@
  76         .popsection
  77 .endm
  78
  79 /*
  80  * These are the bare retpoline primitives for indirect jmp and call.
  81  * Do not use these directly; they only exist to make the ALTERNATIVE
  82  * invocation below less ugly.
  83  */
  84 .macro RETPOLINE_JMP reg:req
  85         call    .Ldo_rop_\@
  86 .Lspec_trap_\@:
  87         pause
  88         lfence
  89         jmp     .Lspec_trap_\@
  90 .Ldo_rop_\@:
  91         mov     \reg, (%_ASM_SP)
  92         ret
  93 .endm
  94
  95 /*
  96  * This is a wrapper around RETPOLINE_JMP so the called function in reg
  97  * returns to the instruction after the macro.
  98  */
  99 .macro RETPOLINE_CALL reg:req
 100         jmp     .Ldo_call_\@
 101 .Ldo_retpoline_jmp_\@:
 102         RETPOLINE_JMP \reg
 103 .Ldo_call_\@:
 104         call    .Ldo_retpoline_jmp_\@
 105 .endm
 106
 107 /*
 108  * JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
 109  * indirect jmp/call which may be susceptible to the Spectre variant 2
 110  * attack.
 111  */
 112 .macro JMP_NOSPEC reg:req
 113 #ifdef CONFIG_RETPOLINE
 114         ANNOTATE_NOSPEC_ALTERNATIVE
 115         ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *\reg),  \
 116                 __stringify(RETPOLINE_JMP \reg), X86_FEATURE_RETPOLINE, \
 117                 __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *\reg), X86_FEATURE_RETPOLINE_AMD
 118 #else
 119         jmp     *\reg
 120 #endif
 121 .endm
 122
 123 .macro CALL_NOSPEC reg:req
 124 #ifdef CONFIG_RETPOLINE
 125         ANNOTATE_NOSPEC_ALTERNATIVE
 126         ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *\reg), \
 127                 __stringify(RETPOLINE_CALL \reg), X86_FEATURE_RETPOLINE,\
 128                 __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *\reg), X86_FEATURE_RETPOLINE_AMD
 129 #else
 130         call    *\reg
 131 #endif
 132 .endm
 133
 134  /*
 135   * A simpler FILL_RETURN_BUFFER macro. Don't make people use the CPP
 136   * monstrosity above, manually.
 137   */
 138 .macro FILL_RETURN_BUFFER reg:req nr:req ftr:req
 139 #ifdef CONFIG_RETPOLINE
 140         ANNOTATE_NOSPEC_ALTERNATIVE
 141         ALTERNATIVE "jmp .Lskip_rsb_\@",                                \
 142                 __stringify(__FILL_RETURN_BUFFER(\reg,\nr,%_ASM_SP))    \
 143                 \ftr
 144 .Lskip_rsb_\@:
 145 #endif
 146 .endm
 147
 148 #else /* __ASSEMBLY__ */
 149
 150 #define ANNOTATE_RETPOLINE_SAFE                                 \
 151         "999:\n\t"                                              \
 152         ".pushsection .discard.retpoline_safe\n\t"              \
 153         _ASM_PTR " 999b\n\t"                                    \
 154         ".popsection\n\t"
 155
 156 #ifdef CONFIG_RETPOLINE
 157 #ifdef CONFIG_X86_64
 158
 159 /*
 160  * Inline asm uses the %V modifier which is only in newer GCC
 161  * which is ensured when CONFIG_RETPOLINE is defined.
 162  */
 163 # define CALL_NOSPEC                                            \
 164         ANNOTATE_NOSPEC_ALTERNATIVE                             \
 165         ALTERNATIVE_2(                                          \
 166         ANNOTATE_RETPOLINE_SAFE                                 \
 167         "call *%[thunk_target]\n",                              \
 168         "call __x86_indirect_thunk_%V[thunk_target]\n",         \
 169         X86_FEATURE_RETPOLINE,                                  \
 170         "lfence;\n"                                             \
 171         ANNOTATE_RETPOLINE_SAFE                                 \
 172         "call *%[thunk_target]\n",                              \
 173         X86_FEATURE_RETPOLINE_AMD)
 174 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)
 175
 176 #else /* CONFIG_X86_32 */
 177 /*
 178  * For i386 we use the original ret-equivalent retpoline, because
 179  * otherwise we'll run out of registers. We don't care about CET
 180  * here, anyway.
 181  */
 182 # define CALL_NOSPEC                                            \
 183         ANNOTATE_NOSPEC_ALTERNATIVE                             \
 184         ALTERNATIVE_2(                                          \
 185         ANNOTATE_RETPOLINE_SAFE                                 \
 186         "call *%[thunk_target]\n",                              \
 187         "       jmp    904f;\n"                                 \
 188         "       .align 16\n"                                    \
 189         "901:   call   903f;\n"                                 \
 190         "902:   pause;\n"                                       \
 191         "       lfence;\n"                                      \
 192         "       jmp    902b;\n"                                 \
 193         "       .align 16\n"                                    \
 194         "903:   lea    4(%%esp), %%esp;\n"                      \
 195         "       pushl  %[thunk_target];\n"                      \
 196         "       ret;\n"                                         \
 197         "       .align 16\n"                                    \
 198         "904:   call   901b;\n",                                \
 199         X86_FEATURE_RETPOLINE,                                  \
 200         "lfence;\n"                                             \
 201         ANNOTATE_RETPOLINE_SAFE                                 \
 202         "call *%[thunk_target]\n",                              \
 203         X86_FEATURE_RETPOLINE_AMD)
 204
 205 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
 206 #endif
 207 #else /* No retpoline for C / inline asm */
 208 # define CALL_NOSPEC "call *%[thunk_target]\n"
 209 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
 210 #endif
 211
 212 /* The Spectre V2 mitigation variants */
 213 enum spectre_v2_mitigation {
 214         SPECTRE_V2_NONE,
 215         SPECTRE_V2_RETPOLINE_GENERIC,
 216         SPECTRE_V2_RETPOLINE_AMD,
 217         SPECTRE_V2_IBRS_ENHANCED,
 218 };
 219
 220 /* The indirect branch speculation control variants */
 221 enum spectre_v2_user_mitigation {
 222         SPECTRE_V2_USER_NONE,
 223         SPECTRE_V2_USER_STRICT,
 224         SPECTRE_V2_USER_STRICT_PREFERRED,
 225         SPECTRE_V2_USER_PRCTL,
 226         SPECTRE_V2_USER_SECCOMP,
 227 };
 228
 229 /* The Speculative Store Bypass disable variants */
 230 enum ssb_mitigation {
 231         SPEC_STORE_BYPASS_NONE,
 232         SPEC_STORE_BYPASS_DISABLE,
 233         SPEC_STORE_BYPASS_PRCTL,
 234         SPEC_STORE_BYPASS_SECCOMP,
 235 };
 236
 237 extern char __indirect_thunk_start[];
 238 extern char __indirect_thunk_end[];
 239
 240 /*
 241  * On VMEXIT we must ensure that no RSB predictions learned in the guest
 242  * can be followed in the host, by overwriting the RSB completely. Both
 243  * retpoline and IBRS mitigations for Spectre v2 need this; only on future
 244  * CPUs with IBRS_ALL *might* it be avoided.
 245  */
 246 static inline void vmexit_fill_RSB(void)
 247 {
 248 #ifdef CONFIG_RETPOLINE
 249         unsigned long loops;
 250
 251         asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
 252                       ALTERNATIVE("jmp 910f",
 253                                   __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
 254                                   X86_FEATURE_RETPOLINE)
 255                       "910:"
 256                       : "=r" (loops), ASM_CALL_CONSTRAINT
 257                       : : "memory" );
 258 #endif
 259 }
 260
 261 static __always_inline
 262 void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
 263 {
 264         asm volatile(ALTERNATIVE("", "wrmsr", %c[feature])
 265                 : : "c" (msr),
 266                     "a" ((u32)val),
 267                     "d" ((u32)(val >> 32)),
 268                     [feature] "i" (feature)
 269                 : "memory");
 270 }
 271
 272 static inline void indirect_branch_prediction_barrier(void)
 273 {
 274         u64 val = PRED_CMD_IBPB;
 275
 276         alternative_msr_write(MSR_IA32_PRED_CMD, val, X86_FEATURE_USE_IBPB);
 277 }
 278
 279 /* The Intel SPEC CTRL MSR base value cache */
 280 extern u64 x86_spec_ctrl_base;
 281
 282 /*
 283  * With retpoline, we must use IBRS to restrict branch prediction
 284  * before calling into firmware.
 285  *
 286  * (Implemented as CPP macros due to header hell.)
 287  */
 288 #define firmware_restrict_branch_speculation_start()                    \
 289 do {                                                                    \
 290         u64 val = x86_spec_ctrl_base | SPEC_CTRL_IBRS;                  \
 291                                                                         \
 292         preempt_disable();                                              \
 293         alternative_msr_write(MSR_IA32_SPEC_CTRL, val,                  \
 294                               X86_FEATURE_USE_IBRS_FW);                 \
 295 } while (0)
 296
 297 #define firmware_restrict_branch_speculation_end()                      \
 298 do {                                                                    \
 299         u64 val = x86_spec_ctrl_base;                                   \
 300                                                                         \
 301         alternative_msr_write(MSR_IA32_SPEC_CTRL, val,                  \
 302                               X86_FEATURE_USE_IBRS_FW);                 \
 303         preempt_enable();                                               \
 304 } while (0)
 305
 306 DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
 307 DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
 308 DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
 309
 310 DECLARE_STATIC_KEY_FALSE(mds_user_clear);
 311 DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
 312
 313 #include <asm/segment.h>
 314
 315 /**
 316  * mds_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
 317  *
 318  * This uses the otherwise unused and obsolete VERW instruction in
 319  * combination with microcode which triggers a CPU buffer flush when the
 320  * instruction is executed.
 321  */
 322 static inline void mds_clear_cpu_buffers(void)
 323 {
 324         static const u16 ds = __KERNEL_DS;
 325
 326         /*
 327          * Has to be the memory-operand variant because only that
 328          * guarantees the CPU buffer flush functionality according to
 329          * documentation. The register-operand variant does not.
 330          * Works with any segment selector, but a valid writable
 331          * data segment is the fastest variant.
 332          *
 333          * "cc" clobber is required because VERW modifies ZF.
 334          */
 335         asm volatile("verw %[ds]" : : [ds] "m" (ds) : "cc");
 336 }
 337
 338 /**
 339  * mds_user_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
 340  *
 341  * Clear CPU buffers if the corresponding static key is enabled
 342  */
 343 static inline void mds_user_clear_cpu_buffers(void)
 344 {
 345         if (static_branch_likely(&mds_user_clear))
 346                 mds_clear_cpu_buffers();
 347 }
 348
 349 /**
 350  * mds_idle_clear_cpu_buffers - Mitigation for MDS vulnerability
 351  *
 352  * Clear CPU buffers if the corresponding static key is enabled
 353  */
 354 static inline void mds_idle_clear_cpu_buffers(void)
 355 {
 356         if (static_branch_likely(&mds_idle_clear))
 357                 mds_clear_cpu_buffers();
 358 }
 359
 360 #endif /* __ASSEMBLY__ */
 361
 362 /*
 363  * Below is used in the eBPF JIT compiler and emits the byte sequence
 364  * for the following assembly:
 365  *
 366  * With retpolines configured:
 367  *
 368  *    callq do_rop
 369  *  spec_trap:
 370  *    pause
 371  *    lfence
 372  *    jmp spec_trap
 373  *  do_rop:
 374  *    mov %rax,(%rsp) for x86_64
 375  *    mov %edx,(%esp) for x86_32
 376  *    retq
 377  *
 378  * Without retpolines configured:
 379  *
 380  *    jmp *%rax for x86_64
 381  *    jmp *%edx for x86_32
 382  */
 383 #ifdef CONFIG_RETPOLINE
 384 # ifdef CONFIG_X86_64
 385 #  define RETPOLINE_RAX_BPF_JIT_SIZE    17
 386 #  define RETPOLINE_RAX_BPF_JIT()                               \
 387 do {                                                            \
 388         EMIT1_off32(0xE8, 7);    /* callq do_rop */             \
 389         /* spec_trap: */                                        \
 390         EMIT2(0xF3, 0x90);       /* pause */                    \
 391         EMIT3(0x0F, 0xAE, 0xE8); /* lfence */                   \
 392         EMIT2(0xEB, 0xF9);       /* jmp spec_trap */            \
 393         /* do_rop: */                                           \
 394         EMIT4(0x48, 0x89, 0x04, 0x24); /* mov %rax,(%rsp) */    \
 395         EMIT1(0xC3);             /* retq */                     \
 396 } while (0)
 397 # else /* !CONFIG_X86_64 */
 398 #  define RETPOLINE_EDX_BPF_JIT()                               \
 399 do {                                                            \
 400         EMIT1_off32(0xE8, 7);    /* call do_rop */              \
 401         /* spec_trap: */                                        \
 402         EMIT2(0xF3, 0x90);       /* pause */                    \
 403         EMIT3(0x0F, 0xAE, 0xE8); /* lfence */                   \
 404         EMIT2(0xEB, 0xF9);       /* jmp spec_trap */            \
 405         /* do_rop: */                                           \
 406         EMIT3(0x89, 0x14, 0x24); /* mov %edx,(%esp) */          \
 407         EMIT1(0xC3);             /* ret */                      \
 408 } while (0)
 409 # endif
 410 #else /* !CONFIG_RETPOLINE */
 411 # ifdef CONFIG_X86_64
 412 #  define RETPOLINE_RAX_BPF_JIT_SIZE    2
 413 #  define RETPOLINE_RAX_BPF_JIT()                               \
 414         EMIT2(0xFF, 0xE0);       /* jmp *%rax */
 415 # else /* !CONFIG_X86_64 */
 416 #  define RETPOLINE_EDX_BPF_JIT()                               \
 417         EMIT2(0xFF, 0xE2)        /* jmp *%edx */
 418 # endif
 419 #endif
 420
 421 #endif /* _ASM_X86_NOSPEC_BRANCH_H_ */