1 # SPDX-License-Identifier: GPL-2.0
11 config STACKTRACE_SUPPORT
14 config ARCH_HAS_ILOG2_U32
17 config ARCH_HAS_ILOG2_U64
20 config GENERIC_HWEIGHT
26 config GENERIC_BUG_RELATIVE_POINTERS
29 config GENERIC_LOCKBREAK
30 def_bool y if PREEMPTION
44 config ARCH_SUPPORTS_UPROBES
47 config KASAN_SHADOW_OFFSET
50 default 0x1C000000000000
55 # Note: keep this list sorted alphabetically
57 imply IMA_SECURE_AND_OR_TRUSTED_BOOT
58 select ALTERNATE_USER_ADDRESS_SPACE
59 select ARCH_32BIT_USTAT_F_TINODE
60 select ARCH_BINFMT_ELF_STATE
61 select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
62 select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM
63 select ARCH_ENABLE_MEMORY_HOTREMOVE
64 select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
65 select ARCH_HAS_CURRENT_STACK_POINTER
66 select ARCH_HAS_DEBUG_VM_PGTABLE
67 select ARCH_HAS_DEBUG_WX
68 select ARCH_HAS_DEVMEM_IS_ALLOWED
69 select ARCH_HAS_ELF_RANDOMIZE
70 select ARCH_HAS_FORCE_DMA_UNENCRYPTED
71 select ARCH_HAS_FORTIFY_SOURCE
72 select ARCH_HAS_GCOV_PROFILE_ALL
73 select ARCH_HAS_GIGANTIC_PAGE
75 select ARCH_HAS_MEMBARRIER_SYNC_CORE
76 select ARCH_HAS_MEM_ENCRYPT
77 select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
78 select ARCH_HAS_PTE_SPECIAL
79 select ARCH_HAS_SCALED_CPUTIME
80 select ARCH_HAS_SET_DIRECT_MAP
81 select ARCH_HAS_SET_MEMORY
82 select ARCH_HAS_STRICT_KERNEL_RWX
83 select ARCH_HAS_STRICT_MODULE_RWX
84 select ARCH_HAS_SYSCALL_WRAPPER
85 select ARCH_HAS_UBSAN_SANITIZE_ALL
86 select ARCH_HAS_VDSO_DATA
87 select ARCH_HAVE_NMI_SAFE_CMPXCHG
88 select ARCH_INLINE_READ_LOCK
89 select ARCH_INLINE_READ_LOCK_BH
90 select ARCH_INLINE_READ_LOCK_IRQ
91 select ARCH_INLINE_READ_LOCK_IRQSAVE
92 select ARCH_INLINE_READ_TRYLOCK
93 select ARCH_INLINE_READ_UNLOCK
94 select ARCH_INLINE_READ_UNLOCK_BH
95 select ARCH_INLINE_READ_UNLOCK_IRQ
96 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
97 select ARCH_INLINE_SPIN_LOCK
98 select ARCH_INLINE_SPIN_LOCK_BH
99 select ARCH_INLINE_SPIN_LOCK_IRQ
100 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
101 select ARCH_INLINE_SPIN_TRYLOCK
102 select ARCH_INLINE_SPIN_TRYLOCK_BH
103 select ARCH_INLINE_SPIN_UNLOCK
104 select ARCH_INLINE_SPIN_UNLOCK_BH
105 select ARCH_INLINE_SPIN_UNLOCK_IRQ
106 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
107 select ARCH_INLINE_WRITE_LOCK
108 select ARCH_INLINE_WRITE_LOCK_BH
109 select ARCH_INLINE_WRITE_LOCK_IRQ
110 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
111 select ARCH_INLINE_WRITE_TRYLOCK
112 select ARCH_INLINE_WRITE_UNLOCK
113 select ARCH_INLINE_WRITE_UNLOCK_BH
114 select ARCH_INLINE_WRITE_UNLOCK_IRQ
115 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
116 select ARCH_STACKWALK
117 select ARCH_SUPPORTS_ATOMIC_RMW
118 select ARCH_SUPPORTS_DEBUG_PAGEALLOC
119 select ARCH_SUPPORTS_HUGETLBFS
120 select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && CC_IS_CLANG
121 select ARCH_SUPPORTS_NUMA_BALANCING
122 select ARCH_SUPPORTS_PER_VMA_LOCK
123 select ARCH_USE_BUILTIN_BSWAP
124 select ARCH_USE_CMPXCHG_LOCKREF
125 select ARCH_USE_SYM_ANNOTATIONS
126 select ARCH_WANTS_NO_INSTR
127 select ARCH_WANT_DEFAULT_BPF_JIT
128 select ARCH_WANT_IPC_PARSE_VERSION
129 select ARCH_WANT_KERNEL_PMD_MKWRITE
130 select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
131 select BUILDTIME_TABLE_SORT
132 select CLONE_BACKWARDS2
133 select DCACHE_WORD_ACCESS if !KMSAN
134 select DMA_OPS if PCI
135 select DYNAMIC_FTRACE if FUNCTION_TRACER
136 select FUNCTION_ALIGNMENT_8B if CC_IS_GCC
137 select FUNCTION_ALIGNMENT_16B if !CC_IS_GCC
138 select GENERIC_ALLOCATOR
139 select GENERIC_CPU_AUTOPROBE
140 select GENERIC_CPU_VULNERABILITIES
142 select GENERIC_GETTIMEOFDAY
143 select GENERIC_PTDUMP
144 select GENERIC_SMP_IDLE_THREAD
145 select GENERIC_TIME_VSYSCALL
146 select GENERIC_VDSO_TIME_NS
147 select GENERIC_IOREMAP if PCI
148 select HAVE_ALIGNED_STRUCT_PAGE
149 select HAVE_ARCH_AUDITSYSCALL
150 select HAVE_ARCH_JUMP_LABEL
151 select HAVE_ARCH_JUMP_LABEL_RELATIVE
152 select HAVE_ARCH_KASAN
153 select HAVE_ARCH_KASAN_VMALLOC
154 select HAVE_ARCH_KCSAN
155 select HAVE_ARCH_KFENCE
156 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
157 select HAVE_ARCH_SECCOMP_FILTER
158 select HAVE_ARCH_SOFT_DIRTY
159 select HAVE_ARCH_STACKLEAK
160 select HAVE_ARCH_TRACEHOOK
161 select HAVE_ARCH_TRANSPARENT_HUGEPAGE
162 select HAVE_ARCH_VMAP_STACK
163 select HAVE_ASM_MODVERSIONS
164 select HAVE_CMPXCHG_DOUBLE
165 select HAVE_CMPXCHG_LOCAL
166 select HAVE_DEBUG_KMEMLEAK
167 select HAVE_DMA_CONTIGUOUS
168 select HAVE_DYNAMIC_FTRACE
169 select HAVE_DYNAMIC_FTRACE_WITH_ARGS
170 select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
171 select HAVE_DYNAMIC_FTRACE_WITH_REGS
172 select HAVE_EBPF_JIT if HAVE_MARCH_Z196_FEATURES
173 select HAVE_EFFICIENT_UNALIGNED_ACCESS
176 select HAVE_FTRACE_MCOUNT_RECORD
177 select HAVE_FUNCTION_ARG_ACCESS_API
178 select HAVE_FUNCTION_ERROR_INJECTION
179 select HAVE_FUNCTION_GRAPH_RETVAL
180 select HAVE_FUNCTION_GRAPH_TRACER
181 select HAVE_FUNCTION_TRACER
182 select HAVE_GCC_PLUGINS
183 select HAVE_GENERIC_VDSO
184 select HAVE_IOREMAP_PROT if PCI
185 select HAVE_KERNEL_BZIP2
186 select HAVE_KERNEL_GZIP
187 select HAVE_KERNEL_LZ4
188 select HAVE_KERNEL_LZMA
189 select HAVE_KERNEL_LZO
190 select HAVE_KERNEL_UNCOMPRESSED
191 select HAVE_KERNEL_XZ
192 select HAVE_KERNEL_ZSTD
194 select HAVE_KPROBES_ON_FTRACE
195 select HAVE_KRETPROBES
197 select HAVE_LIVEPATCH
198 select HAVE_MEMBLOCK_PHYS_MAP
199 select HAVE_MOD_ARCH_SPECIFIC
201 select HAVE_NOP_MCOUNT
203 select HAVE_PERF_EVENTS
204 select HAVE_PERF_REGS
205 select HAVE_PERF_USER_STACK_DUMP
206 select HAVE_REGS_AND_STACK_ACCESS_API
207 select HAVE_RELIABLE_STACKTRACE
210 select HAVE_SAMPLE_FTRACE_DIRECT
211 select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
212 select HAVE_SETUP_PER_CPU_AREA
213 select HAVE_SOFTIRQ_ON_OWN_STACK
214 select HAVE_SYSCALL_TRACEPOINTS
215 select HAVE_VIRT_CPU_ACCOUNTING
216 select HAVE_VIRT_CPU_ACCOUNTING_IDLE
217 select IOMMU_HELPER if PCI
218 select IOMMU_SUPPORT if PCI
220 select MMU_GATHER_MERGE_VMAS
221 select MMU_GATHER_NO_GATHER
222 select MMU_GATHER_RCU_TABLE_FREE
223 select MODULES_USE_ELF_RELA
224 select NEED_DMA_MAP_STATE if PCI
225 select NEED_PER_CPU_EMBED_FIRST_CHUNK
226 select NEED_SG_DMA_LENGTH if PCI
228 select OLD_SIGSUSPEND3
229 select PCI_DOMAINS if PCI
230 select PCI_MSI if PCI
231 select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
234 select SYSCTL_EXCEPTION_TRACE
235 select THREAD_INFO_IN_TASK
236 select TRACE_IRQFLAGS_SUPPORT
238 select USER_STACKTRACE_SUPPORT
239 select VIRT_CPU_ACCOUNTING
241 # Note: keep the above list sorted alphabetically
243 config SCHED_OMIT_FRAME_POINTER
246 config PGTABLE_LEVELS
250 source "kernel/livepatch/Kconfig"
252 config ARCH_SUPPORTS_KEXEC
255 config ARCH_SUPPORTS_KEXEC_FILE
258 config ARCH_SUPPORTS_KEXEC_SIG
259 def_bool MODULE_SIG_FORMAT
261 config ARCH_SUPPORTS_KEXEC_PURGATORY
264 config ARCH_SUPPORTS_CRASH_DUMP
267 Refer to <file:Documentation/arch/s390/zfcpdump.rst> for more details on this.
268 This option also enables s390 zfcpdump.
269 See also <file:Documentation/arch/s390/zfcpdump.rst>
271 menu "Processor type and features"
273 config HAVE_MARCH_Z10_FEATURES
276 config HAVE_MARCH_Z196_FEATURES
278 select HAVE_MARCH_Z10_FEATURES
280 config HAVE_MARCH_ZEC12_FEATURES
282 select HAVE_MARCH_Z196_FEATURES
284 config HAVE_MARCH_Z13_FEATURES
286 select HAVE_MARCH_ZEC12_FEATURES
288 config HAVE_MARCH_Z14_FEATURES
290 select HAVE_MARCH_Z13_FEATURES
292 config HAVE_MARCH_Z15_FEATURES
294 select HAVE_MARCH_Z14_FEATURES
296 config HAVE_MARCH_Z16_FEATURES
298 select HAVE_MARCH_Z15_FEATURES
301 prompt "Processor type"
305 bool "IBM System z10"
306 select HAVE_MARCH_Z10_FEATURES
307 depends on $(cc-option,-march=z10)
309 Select this to enable optimizations for IBM System z10 (2097 and 2098
310 series). This is the oldest machine generation currently supported.
313 bool "IBM zEnterprise 114 and 196"
314 select HAVE_MARCH_Z196_FEATURES
315 depends on $(cc-option,-march=z196)
317 Select this to enable optimizations for IBM zEnterprise 114 and 196
318 (2818 and 2817 series). The kernel will be slightly faster but will
319 not work on older machines.
322 bool "IBM zBC12 and zEC12"
323 select HAVE_MARCH_ZEC12_FEATURES
324 depends on $(cc-option,-march=zEC12)
326 Select this to enable optimizations for IBM zBC12 and zEC12 (2828 and
327 2827 series). The kernel will be slightly faster but will not work on
331 bool "IBM z13s and z13"
332 select HAVE_MARCH_Z13_FEATURES
333 depends on $(cc-option,-march=z13)
335 Select this to enable optimizations for IBM z13s and z13 (2965 and
336 2964 series). The kernel will be slightly faster but will not work on
340 bool "IBM z14 ZR1 and z14"
341 select HAVE_MARCH_Z14_FEATURES
342 depends on $(cc-option,-march=z14)
344 Select this to enable optimizations for IBM z14 ZR1 and z14 (3907
345 and 3906 series). The kernel will be slightly faster but will not
346 work on older machines.
350 select HAVE_MARCH_Z15_FEATURES
351 depends on $(cc-option,-march=z15)
353 Select this to enable optimizations for IBM z15 (8562
354 and 8561 series). The kernel will be slightly faster but will not
355 work on older machines.
359 select HAVE_MARCH_Z16_FEATURES
360 depends on $(cc-option,-march=z16)
362 Select this to enable optimizations for IBM z16 (3931 and
367 config MARCH_Z10_TUNE
368 def_bool TUNE_Z10 || MARCH_Z10 && TUNE_DEFAULT
370 config MARCH_Z196_TUNE
371 def_bool TUNE_Z196 || MARCH_Z196 && TUNE_DEFAULT
373 config MARCH_ZEC12_TUNE
374 def_bool TUNE_ZEC12 || MARCH_ZEC12 && TUNE_DEFAULT
376 config MARCH_Z13_TUNE
377 def_bool TUNE_Z13 || MARCH_Z13 && TUNE_DEFAULT
379 config MARCH_Z14_TUNE
380 def_bool TUNE_Z14 || MARCH_Z14 && TUNE_DEFAULT
382 config MARCH_Z15_TUNE
383 def_bool TUNE_Z15 || MARCH_Z15 && TUNE_DEFAULT
385 config MARCH_Z16_TUNE
386 def_bool TUNE_Z16 || MARCH_Z16 && TUNE_DEFAULT
389 prompt "Tune code generation"
392 Cause the compiler to tune (-mtune) the generated code for a machine.
393 This will make the code run faster on the selected machine but
394 somewhat slower on other machines.
395 This option only changes how the compiler emits instructions, not the
396 selection of instructions itself, so the resulting kernel will run on
402 Tune the generated code for the target processor for which the kernel
406 bool "IBM System z10"
409 bool "IBM zEnterprise 114 and 196"
410 depends on $(cc-option,-mtune=z196)
413 bool "IBM zBC12 and zEC12"
414 depends on $(cc-option,-mtune=zEC12)
417 bool "IBM z13s and z13"
418 depends on $(cc-option,-mtune=z13)
421 bool "IBM z14 ZR1 and z14"
422 depends on $(cc-option,-mtune=z14)
426 depends on $(cc-option,-mtune=z15)
430 depends on $(cc-option,-mtune=z16)
437 config COMMAND_LINE_SIZE
438 int "Maximum size of kernel command line"
442 This allows you to specify the maximum length of the kernel command
447 prompt "Kernel support for 31 bit emulation"
448 select ARCH_WANT_OLD_COMPAT_IPC
449 select COMPAT_OLD_SIGACTION
452 depends on !CC_IS_CLANG
454 Select this option if you want to enable your system kernel to
455 handle system-calls from ELF binaries for 31 bit ESA. This option
456 (and some other stuff like libraries and such) is needed for
457 executing 31 bit applications. It is safe to say "Y".
463 int "Maximum number of CPUs (2-512)"
467 This allows you to specify the maximum number of CPUs which this
468 kernel will support. The maximum supported value is 512 and the
469 minimum value which makes sense is 2.
471 This is purely to save memory - each supported CPU adds
472 approximately sixteen kilobytes to the kernel image.
479 depends on SCHED_TOPOLOGY
484 This option adds NUMA support to the kernel.
497 config SCHED_TOPOLOGY
499 prompt "Topology scheduler support"
503 Topology scheduler support improves the CPU scheduler's decision
504 making when dealing with machines that have multi-threading,
505 multiple cores or multiple books.
507 source "kernel/Kconfig.hz"
510 bool "Get user certificates via DIAG320"
512 select CRYPTO_LIB_SHA256
514 Enable this option if you want to access user-provided secure boot
515 certificates via DIAG 0x320.
517 These certificates will be made available via the keyring named
522 prompt "Enable modified branch prediction for the kernel by default"
524 If this option is selected the kernel will switch to a modified
525 branch prediction mode if the firmware interface is available.
526 The modified branch prediction mode improves the behaviour in
527 regard to speculative execution.
529 With the option enabled the kernel parameter "nobp=0" or "nospec"
530 can be used to run the kernel in the normal branch prediction mode.
532 With the option disabled the modified branch prediction mode is
533 enabled with the "nobp=1" kernel parameter.
539 depends on $(cc-option,-mindirect-branch=thunk)
540 prompt "Avoid speculative indirect branches in the kernel"
542 Compile the kernel with the expoline compiler options to guard
543 against kernel-to-user data leaks by avoiding speculative indirect
545 Requires a compiler with -mindirect-branch=thunk support for full
546 protection. The kernel may run slower.
550 config EXPOLINE_EXTERN
553 depends on CC_IS_GCC && GCC_VERSION >= 110200
554 depends on $(success,$(srctree)/arch/s390/tools/gcc-thunk-extern.sh $(CC))
555 prompt "Generate expolines as extern functions."
557 This option is required for some tooling like kpatch. The kernel is
558 compiled with -mindirect-branch=thunk-extern and requires a newer
564 prompt "Expoline default"
566 default EXPOLINE_FULL
569 bool "spectre_v2=off"
572 bool "spectre_v2=auto"
582 This builds a kernel image that retains relocation information
583 so it can be loaded at an arbitrary address.
584 The kernel is linked as a position-independent executable (PIE)
585 and contains dynamic relocations which are processed early in the
587 The relocations make the kernel image about 15% larger (compressed
588 10%), but are discarded at runtime.
589 Note: this option exists only for documentation purposes, please do
592 config RANDOMIZE_BASE
593 bool "Randomize the address of the kernel image (KASLR)"
596 In support of Kernel Address Space Layout Randomization (KASLR),
597 this randomizes the address at which the kernel image is loaded,
598 as a security feature that deters exploit attempts relying on
599 knowledge of the location of kernel internals.
605 config ARCH_SPARSEMEM_ENABLE
607 select SPARSEMEM_VMEMMAP_ENABLE
608 select SPARSEMEM_VMEMMAP
610 config ARCH_SPARSEMEM_DEFAULT
613 config MAX_PHYSMEM_BITS
614 int "Maximum size of supported physical memory in bits (42-53)"
618 This option specifies the maximum supported size of physical memory
619 in bits. Supported is any size between 2^42 (4TB) and 2^53 (8PB).
620 Increasing the number of bits also increases the kernel image size.
621 By default 46 bits (64TB) are supported.
625 depends on !VMAP_STACK
626 prompt "Detect kernel stack overflow"
628 This option enables the compiler option -mstack-guard and
629 -mstack-size if they are available. If the compiler supports them
630 it will emit additional code to each function prolog to trigger
631 an illegal operation if the kernel stack is about to overflow.
633 Say N if you are unsure.
636 int "Size of the guard area (128-1024)"
638 depends on CHECK_STACK
641 This allows you to specify the size of the guard area at the lower
642 end of the kernel stack. If the kernel stack points into the guard
643 area on function entry an illegal operation is triggered. The size
644 needs to be a power of 2. Please keep in mind that the size of an
645 interrupt frame is 184 bytes for 31 bit and 328 bytes on 64 bit.
646 The minimum size for the stack guard should be 256 for 31 bit and
655 prompt "QDIO support"
657 This driver provides the Queued Direct I/O base support for
660 To compile this driver as a module, choose M here: the
661 module will be called qdio.
667 config PCI_NR_FUNCTIONS
668 int "Maximum number of PCI functions (1-4096)"
672 This allows you to specify the maximum number of PCI functions which
673 this kernel will support.
682 prompt "Support for CHSC subchannels"
684 This driver allows usage of CHSC subchannels. A CHSC subchannel
685 is usually present on LPAR only.
686 The driver creates a device /dev/chsc, which may be used to
687 obtain I/O configuration information about the machine and
688 to issue asynchronous chsc commands (DANGEROUS).
689 You will usually only want to use this interface on a special
690 LPAR designated for system management.
692 To compile this driver as a module, choose M here: the
693 module will be called chsc_sch.
699 prompt "SCM bus driver"
701 Bus driver for Storage Class Memory.
705 prompt "Support for EADM subchannels"
708 This driver allows usage of EADM subchannels. EADM subchannels act
709 as a communication vehicle for SCM increments.
711 To compile this driver as a module, choose M here: the
712 module will be called eadm_sch.
716 prompt "Support for VFIO-CCW subchannels"
720 This driver allows usage of I/O subchannels via VFIO-CCW.
722 To compile this driver as a module, choose M here: the
723 module will be called vfio_ccw.
727 prompt "VFIO support for AP devices"
733 This driver grants access to Adjunct Processor (AP) devices
734 via the VFIO mediated device interface.
736 To compile this driver as a module, choose M here: the module
737 will be called vfio_ap.
746 default (SMC || CCWGROUP)
748 menu "Virtualization"
750 config PROTECTED_VIRTUALIZATION_GUEST
752 prompt "Protected virtualization guest support"
754 Select this option, if you want to be able to run this
755 kernel as a protected virtualization KVM guest.
756 Protected virtualization capable machines have a mini hypervisor
757 located at machine level (an ultravisor). With help of the
758 Ultravisor, KVM will be able to run "protected" VMs, special
759 VMs whose memory and management data are unavailable to KVM.
763 prompt "Pseudo page fault support"
765 Select this option, if you want to use PFAULT pseudo page fault
766 handling under VM. If running native or in LPAR, this option
767 has no effect. If your VM does not support PFAULT, PAGEEX
768 pseudo page fault handling will be used.
769 Note that VM 4.2 supports PFAULT but has a bug in its
770 implementation that causes some problems.
771 Everybody who wants to run Linux under VM != VM4.2 should select
776 prompt "Cooperative memory management"
778 Select this option, if you want to enable the kernel interface
779 to reduce the memory size of the system. This is accomplished
780 by allocating pages of memory and put them "on hold". This only
781 makes sense for a system running under VM where the unused pages
782 will be reused by VM for other guest systems. The interface
783 allows an external monitor to balance memory of many systems.
784 Everybody who wants to run Linux under VM should select this
789 prompt "IUCV special message interface to cooperative memory management"
790 depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
792 Select this option to enable the special message interface to
793 the cooperative memory management.
797 prompt "Linux - VM Monitor Stream, base infrastructure"
798 depends on PROC_SYSCTL
800 This provides a kernel interface for creating and updating z/VM APPLDATA
801 monitor records. The monitor records are updated at certain time
802 intervals, once the timer is started.
803 Writing 1 or 0 to /proc/appldata/timer starts(1) or stops(0) the timer,
804 i.e. enables or disables monitoring on the Linux side.
805 A custom interval value (in seconds) can be written to
806 /proc/appldata/interval.
808 Defaults are 60 seconds interval and timer off.
809 The /proc entries can also be read from, showing the current settings.
813 prompt "Monitor memory management statistics"
814 depends on APPLDATA_BASE && VM_EVENT_COUNTERS
816 This provides memory management related data to the Linux - VM Monitor
817 Stream, like paging/swapping rate, memory utilisation, etc.
818 Writing 1 or 0 to /proc/appldata/memory creates(1) or removes(0) a z/VM
819 APPLDATA monitor record, i.e. enables or disables monitoring this record
823 The /proc entry can also be read from, showing the current settings.
825 This can also be compiled as a module, which will be called
830 prompt "Monitor OS statistics"
831 depends on APPLDATA_BASE
833 This provides OS related data to the Linux - VM Monitor Stream, like
834 CPU utilisation, etc.
835 Writing 1 or 0 to /proc/appldata/os creates(1) or removes(0) a z/VM
836 APPLDATA monitor record, i.e. enables or disables monitoring this record
840 This can also be compiled as a module, which will be called
843 config APPLDATA_NET_SUM
845 prompt "Monitor overall network statistics"
846 depends on APPLDATA_BASE && NET
848 This provides network related data to the Linux - VM Monitor Stream,
849 currently there is only a total sum of network I/O statistics, no
851 Writing 1 or 0 to /proc/appldata/net_sum creates(1) or removes(0) a z/VM
852 APPLDATA monitor record, i.e. enables or disables monitoring this record
856 This can also be compiled as a module, which will be called
861 prompt "s390 hypervisor information"
863 This provides several binary files at (debugfs)/s390_hypfs/ to
864 provide accounting information in an s390 hypervisor environment.
868 prompt "s390 hypervisor file system support"
869 select SYS_HYPERVISOR
870 depends on S390_HYPFS
872 This is a virtual file system intended to provide accounting
873 information in an s390 hypervisor environment. This file system
874 is deprecated and should not be used.
876 Say N if you are unsure.
878 source "arch/s390/kvm/Kconfig"
882 prompt "s390 support for virtio devices"
884 select VIRTUALIZATION
887 Enabling this option adds support for virtio based paravirtual device
890 Select this option if you want to run the kernel as a guest under
895 config S390_MODULES_SANITY_TEST_HELPERS
900 config S390_UNWIND_SELFTEST
903 default KUNIT_ALL_TESTS
904 prompt "Test unwind functions"
906 This option enables s390 specific stack unwinder testing kernel
907 module. This option is not useful for distributions or general
908 kernels, but only for kernel developers working on architecture code.
910 Say N if you are unsure.
912 config S390_KPROBES_SANITY_TEST
914 prompt "Enable s390 specific kprobes tests"
918 This option enables an s390 specific kprobes test module. This option
919 is not useful for distributions or general kernels, but only for kernel
920 developers working on architecture code.
922 Say N if you are unsure.
924 config S390_MODULES_SANITY_TEST
927 default KUNIT_ALL_TESTS
928 prompt "Enable s390 specific modules tests"
929 select S390_MODULES_SANITY_TEST_HELPERS
931 This option enables an s390 specific modules test. This option is
932 not useful for distributions or general kernels, but only for
933 kernel developers working on architecture code.
935 Say N if you are unsure.