powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
[linux-2.6-block.git] / arch / powerpc / include / asm / eeh.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
4  * Copyright 2001-2012 IBM Corporation.
5  */
6
7 #ifndef _POWERPC_EEH_H
8 #define _POWERPC_EEH_H
9 #ifdef __KERNEL__
10
11 #include <linux/init.h>
12 #include <linux/list.h>
13 #include <linux/string.h>
14 #include <linux/time.h>
15 #include <linux/atomic.h>
16
17 #include <uapi/asm/eeh.h>
18
19 struct pci_dev;
20 struct pci_bus;
21 struct pci_dn;
22
23 #ifdef CONFIG_EEH
24
25 /* EEH subsystem flags */
26 #define EEH_ENABLED             0x01    /* EEH enabled                       */
27 #define EEH_FORCE_DISABLED      0x02    /* EEH disabled                      */
28 #define EEH_PROBE_MODE_DEV      0x04    /* From PCI device                   */
29 #define EEH_PROBE_MODE_DEVTREE  0x08    /* From device tree                  */
30 #define EEH_VALID_PE_ZERO       0x10    /* PE#0 is valid                     */
31 #define EEH_ENABLE_IO_FOR_LOG   0x20    /* Enable IO for log                 */
32 #define EEH_EARLY_DUMP_LOG      0x40    /* Dump log immediately              */
33
34 /*
35  * Delay for PE reset, all in ms
36  *
37  * PCI specification has reset hold time of 100 milliseconds.
38  * We have 250 milliseconds here. The PCI bus settlement time
39  * is specified as 1.5 seconds and we have 1.8 seconds.
40  */
41 #define EEH_PE_RST_HOLD_TIME            250
42 #define EEH_PE_RST_SETTLE_TIME          1800
43
44 /*
45  * The struct is used to trace PE related EEH functionality.
46  * In theory, there will have one instance of the struct to
47  * be created against particular PE. In nature, PEs correlate
48  * to each other. the struct has to reflect that hierarchy in
49  * order to easily pick up those affected PEs when one particular
50  * PE has EEH errors.
51  *
52  * Also, one particular PE might be composed of PCI device, PCI
53  * bus and its subordinate components. The struct also need ship
54  * the information. Further more, one particular PE is only meaingful
55  * in the corresponding PHB. Therefore, the root PEs should be created
56  * against existing PHBs in on-to-one fashion.
57  */
58 #define EEH_PE_INVALID  (1 << 0)        /* Invalid   */
59 #define EEH_PE_PHB      (1 << 1)        /* PHB PE    */
60 #define EEH_PE_DEVICE   (1 << 2)        /* Device PE */
61 #define EEH_PE_BUS      (1 << 3)        /* Bus PE    */
62 #define EEH_PE_VF       (1 << 4)        /* VF PE     */
63
64 #define EEH_PE_ISOLATED         (1 << 0)        /* Isolated PE          */
65 #define EEH_PE_RECOVERING       (1 << 1)        /* Recovering PE        */
66 #define EEH_PE_CFG_BLOCKED      (1 << 2)        /* Block config access  */
67 #define EEH_PE_RESET            (1 << 3)        /* PE reset in progress */
68
69 #define EEH_PE_KEEP             (1 << 8)        /* Keep PE on hotplug   */
70 #define EEH_PE_CFG_RESTRICTED   (1 << 9)        /* Block config on error */
71 #define EEH_PE_REMOVED          (1 << 10)       /* Removed permanently  */
72 #define EEH_PE_PRI_BUS          (1 << 11)       /* Cached primary bus   */
73
74 struct eeh_pe {
75         int type;                       /* PE type: PHB/Bus/Device      */
76         int state;                      /* PE EEH dependent mode        */
77         int config_addr;                /* Traditional PCI address      */
78         int addr;                       /* PE configuration address     */
79         struct pci_controller *phb;     /* Associated PHB               */
80         struct pci_bus *bus;            /* Top PCI bus for bus PE       */
81         int check_count;                /* Times of ignored error       */
82         int freeze_count;               /* Times of froze up            */
83         time64_t tstamp;                /* Time on first-time freeze    */
84         int false_positives;            /* Times of reported #ff's      */
85         atomic_t pass_dev_cnt;          /* Count of passed through devs */
86         struct eeh_pe *parent;          /* Parent PE                    */
87         void *data;                     /* PE auxillary data            */
88         struct list_head child_list;    /* List of PEs below this PE    */
89         struct list_head child;         /* Memb. child_list/eeh_phb_pe  */
90         struct list_head edevs;         /* List of eeh_dev in this PE   */
91
92 #ifdef CONFIG_STACKTRACE
93         /*
94          * Saved stack trace. When we find a PE freeze in eeh_dev_check_failure
95          * the stack trace is saved here so we can print it in the recovery
96          * thread if it turns out to due to a real problem rather than
97          * a hot-remove.
98          *
99          * A max of 64 entries might be overkill, but it also might not be.
100          */
101         unsigned long stack_trace[64];
102         int trace_entries;
103 #endif /* CONFIG_STACKTRACE */
104 };
105
106 #define eeh_pe_for_each_dev(pe, edev, tmp) \
107                 list_for_each_entry_safe(edev, tmp, &pe->edevs, entry)
108
109 #define eeh_for_each_pe(root, pe) \
110         for (pe = root; pe; pe = eeh_pe_next(pe, root))
111
112 static inline bool eeh_pe_passed(struct eeh_pe *pe)
113 {
114         return pe ? !!atomic_read(&pe->pass_dev_cnt) : false;
115 }
116
117 /*
118  * The struct is used to trace EEH state for the associated
119  * PCI device node or PCI device. In future, it might
120  * represent PE as well so that the EEH device to form
121  * another tree except the currently existing tree of PCI
122  * buses and PCI devices
123  */
124 #define EEH_DEV_BRIDGE          (1 << 0)        /* PCI bridge           */
125 #define EEH_DEV_ROOT_PORT       (1 << 1)        /* PCIe root port       */
126 #define EEH_DEV_DS_PORT         (1 << 2)        /* Downstream port      */
127 #define EEH_DEV_IRQ_DISABLED    (1 << 3)        /* Interrupt disabled   */
128 #define EEH_DEV_DISCONNECTED    (1 << 4)        /* Removing from PE     */
129
130 #define EEH_DEV_NO_HANDLER      (1 << 8)        /* No error handler     */
131 #define EEH_DEV_SYSFS           (1 << 9)        /* Sysfs created        */
132 #define EEH_DEV_REMOVED         (1 << 10)       /* Removed permanently  */
133
134 struct eeh_dev {
135         int mode;                       /* EEH mode                     */
136         int class_code;                 /* Class code of the device     */
137         int bdfn;                       /* bdfn of device (for cfg ops) */
138         struct pci_controller *controller;
139         int pe_config_addr;             /* PE config address            */
140         u32 config_space[16];           /* Saved PCI config space       */
141         int pcix_cap;                   /* Saved PCIx capability        */
142         int pcie_cap;                   /* Saved PCIe capability        */
143         int aer_cap;                    /* Saved AER capability         */
144         int af_cap;                     /* Saved AF capability          */
145         struct eeh_pe *pe;              /* Associated PE                */
146         struct list_head entry;         /* Membership in eeh_pe.edevs   */
147         struct list_head rmv_entry;     /* Membership in rmv_list       */
148         struct pci_dn *pdn;             /* Associated PCI device node   */
149         struct pci_dev *pdev;           /* Associated PCI device        */
150         bool in_error;                  /* Error flag for edev          */
151         struct pci_dev *physfn;         /* Associated SRIOV PF          */
152 };
153
154 /* "fmt" must be a simple literal string */
155 #define EEH_EDEV_PRINT(level, edev, fmt, ...) \
156         pr_##level("PCI %04x:%02x:%02x.%x#%04x: EEH: " fmt, \
157         (edev)->controller->global_number, PCI_BUSNO((edev)->bdfn), \
158         PCI_SLOT((edev)->bdfn), PCI_FUNC((edev)->bdfn), \
159         ((edev)->pe ? (edev)->pe_config_addr : 0xffff), ##__VA_ARGS__)
160 #define eeh_edev_dbg(edev, fmt, ...) EEH_EDEV_PRINT(debug, (edev), fmt, ##__VA_ARGS__)
161 #define eeh_edev_info(edev, fmt, ...) EEH_EDEV_PRINT(info, (edev), fmt, ##__VA_ARGS__)
162 #define eeh_edev_warn(edev, fmt, ...) EEH_EDEV_PRINT(warn, (edev), fmt, ##__VA_ARGS__)
163 #define eeh_edev_err(edev, fmt, ...) EEH_EDEV_PRINT(err, (edev), fmt, ##__VA_ARGS__)
164
165 static inline struct pci_dn *eeh_dev_to_pdn(struct eeh_dev *edev)
166 {
167         return edev ? edev->pdn : NULL;
168 }
169
170 static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev)
171 {
172         return edev ? edev->pdev : NULL;
173 }
174
175 static inline struct eeh_pe *eeh_dev_to_pe(struct eeh_dev* edev)
176 {
177         return edev ? edev->pe : NULL;
178 }
179
180 /* Return values from eeh_ops::next_error */
181 enum {
182         EEH_NEXT_ERR_NONE = 0,
183         EEH_NEXT_ERR_INF,
184         EEH_NEXT_ERR_FROZEN_PE,
185         EEH_NEXT_ERR_FENCED_PHB,
186         EEH_NEXT_ERR_DEAD_PHB,
187         EEH_NEXT_ERR_DEAD_IOC
188 };
189
190 /*
191  * The struct is used to trace the registered EEH operation
192  * callback functions. Actually, those operation callback
193  * functions are heavily platform dependent. That means the
194  * platform should register its own EEH operation callback
195  * functions before any EEH further operations.
196  */
197 #define EEH_OPT_DISABLE         0       /* EEH disable  */
198 #define EEH_OPT_ENABLE          1       /* EEH enable   */
199 #define EEH_OPT_THAW_MMIO       2       /* MMIO enable  */
200 #define EEH_OPT_THAW_DMA        3       /* DMA enable   */
201 #define EEH_OPT_FREEZE_PE       4       /* Freeze PE    */
202 #define EEH_STATE_UNAVAILABLE   (1 << 0)        /* State unavailable    */
203 #define EEH_STATE_NOT_SUPPORT   (1 << 1)        /* EEH not supported    */
204 #define EEH_STATE_RESET_ACTIVE  (1 << 2)        /* Active reset         */
205 #define EEH_STATE_MMIO_ACTIVE   (1 << 3)        /* Active MMIO          */
206 #define EEH_STATE_DMA_ACTIVE    (1 << 4)        /* Active DMA           */
207 #define EEH_STATE_MMIO_ENABLED  (1 << 5)        /* MMIO enabled         */
208 #define EEH_STATE_DMA_ENABLED   (1 << 6)        /* DMA enabled          */
209 #define EEH_RESET_DEACTIVATE    0       /* Deactivate the PE reset      */
210 #define EEH_RESET_HOT           1       /* Hot reset                    */
211 #define EEH_RESET_FUNDAMENTAL   3       /* Fundamental reset            */
212 #define EEH_LOG_TEMP            1       /* EEH temporary error log      */
213 #define EEH_LOG_PERM            2       /* EEH permanent error log      */
214
215 struct eeh_ops {
216         char *name;
217         int (*init)(void);
218         void* (*probe)(struct pci_dn *pdn, void *data);
219         int (*set_option)(struct eeh_pe *pe, int option);
220         int (*get_pe_addr)(struct eeh_pe *pe);
221         int (*get_state)(struct eeh_pe *pe, int *delay);
222         int (*reset)(struct eeh_pe *pe, int option);
223         int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len);
224         int (*configure_bridge)(struct eeh_pe *pe);
225         int (*err_inject)(struct eeh_pe *pe, int type, int func,
226                           unsigned long addr, unsigned long mask);
227         int (*read_config)(struct pci_dn *pdn, int where, int size, u32 *val);
228         int (*write_config)(struct pci_dn *pdn, int where, int size, u32 val);
229         int (*next_error)(struct eeh_pe **pe);
230         int (*restore_config)(struct pci_dn *pdn);
231         int (*notify_resume)(struct pci_dn *pdn);
232 };
233
234 extern int eeh_subsystem_flags;
235 extern u32 eeh_max_freezes;
236 extern bool eeh_debugfs_no_recover;
237 extern struct eeh_ops *eeh_ops;
238 extern raw_spinlock_t confirm_error_lock;
239
240 static inline void eeh_add_flag(int flag)
241 {
242         eeh_subsystem_flags |= flag;
243 }
244
245 static inline void eeh_clear_flag(int flag)
246 {
247         eeh_subsystem_flags &= ~flag;
248 }
249
250 static inline bool eeh_has_flag(int flag)
251 {
252         return !!(eeh_subsystem_flags & flag);
253 }
254
255 static inline bool eeh_enabled(void)
256 {
257         return eeh_has_flag(EEH_ENABLED) && !eeh_has_flag(EEH_FORCE_DISABLED);
258 }
259
260 static inline void eeh_serialize_lock(unsigned long *flags)
261 {
262         raw_spin_lock_irqsave(&confirm_error_lock, *flags);
263 }
264
265 static inline void eeh_serialize_unlock(unsigned long flags)
266 {
267         raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
268 }
269
270 static inline bool eeh_state_active(int state)
271 {
272         return (state & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
273         == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
274 }
275
276 typedef void (*eeh_edev_traverse_func)(struct eeh_dev *edev, void *flag);
277 typedef void *(*eeh_pe_traverse_func)(struct eeh_pe *pe, void *flag);
278 void eeh_set_pe_aux_size(int size);
279 int eeh_phb_pe_create(struct pci_controller *phb);
280 int eeh_wait_state(struct eeh_pe *pe, int max_wait);
281 struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
282 struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, struct eeh_pe *root);
283 struct eeh_pe *eeh_pe_get(struct pci_controller *phb,
284                           int pe_no, int config_addr);
285 int eeh_add_to_parent_pe(struct eeh_dev *edev);
286 int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
287 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
288 void *eeh_pe_traverse(struct eeh_pe *root,
289                       eeh_pe_traverse_func fn, void *flag);
290 void eeh_pe_dev_traverse(struct eeh_pe *root,
291                          eeh_edev_traverse_func fn, void *flag);
292 void eeh_pe_restore_bars(struct eeh_pe *pe);
293 const char *eeh_pe_loc_get(struct eeh_pe *pe);
294 struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
295
296 struct eeh_dev *eeh_dev_init(struct pci_dn *pdn);
297 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
298 void eeh_show_enabled(void);
299 int __init eeh_ops_register(struct eeh_ops *ops);
300 int __exit eeh_ops_unregister(const char *name);
301 int eeh_check_failure(const volatile void __iomem *token);
302 int eeh_dev_check_failure(struct eeh_dev *edev);
303 void eeh_addr_cache_init(void);
304 void eeh_add_device_early(struct pci_dn *);
305 void eeh_add_device_tree_early(struct pci_dn *);
306 void eeh_add_device_late(struct pci_dev *);
307 void eeh_add_device_tree_late(struct pci_bus *);
308 void eeh_add_sysfs_files(struct pci_bus *);
309 void eeh_remove_device(struct pci_dev *);
310 int eeh_unfreeze_pe(struct eeh_pe *pe);
311 int eeh_pe_reset_and_recover(struct eeh_pe *pe);
312 int eeh_dev_open(struct pci_dev *pdev);
313 void eeh_dev_release(struct pci_dev *pdev);
314 struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group);
315 int eeh_pe_set_option(struct eeh_pe *pe, int option);
316 int eeh_pe_get_state(struct eeh_pe *pe);
317 int eeh_pe_reset(struct eeh_pe *pe, int option, bool include_passed);
318 int eeh_pe_configure(struct eeh_pe *pe);
319 int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
320                       unsigned long addr, unsigned long mask);
321 int eeh_restore_vf_config(struct pci_dn *pdn);
322
323 /**
324  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
325  *
326  * If this macro yields TRUE, the caller relays to eeh_check_failure()
327  * which does further tests out of line.
328  */
329 #define EEH_POSSIBLE_ERROR(val, type)   ((val) == (type)~0 && eeh_enabled())
330
331 /*
332  * Reads from a device which has been isolated by EEH will return
333  * all 1s.  This macro gives an all-1s value of the given size (in
334  * bytes: 1, 2, or 4) for comparing with the result of a read.
335  */
336 #define EEH_IO_ERROR_VALUE(size)        (~0U >> ((4 - (size)) * 8))
337
338 #else /* !CONFIG_EEH */
339
340 static inline bool eeh_enabled(void)
341 {
342         return false;
343 }
344
345 static inline void eeh_show_enabled(void) { }
346
347 static inline void *eeh_dev_init(struct pci_dn *pdn, void *data)
348 {
349         return NULL;
350 }
351
352 static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { }
353
354 static inline int eeh_check_failure(const volatile void __iomem *token)
355 {
356         return 0;
357 }
358
359 #define eeh_dev_check_failure(x) (0)
360
361 static inline void eeh_addr_cache_init(void) { }
362
363 static inline void eeh_add_device_early(struct pci_dn *pdn) { }
364
365 static inline void eeh_add_device_tree_early(struct pci_dn *pdn) { }
366
367 static inline void eeh_add_device_late(struct pci_dev *dev) { }
368
369 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
370
371 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
372
373 static inline void eeh_remove_device(struct pci_dev *dev) { }
374
375 #define EEH_POSSIBLE_ERROR(val, type) (0)
376 #define EEH_IO_ERROR_VALUE(size) (-1UL)
377 #endif /* CONFIG_EEH */
378
379 #ifdef CONFIG_PPC64
380 /*
381  * MMIO read/write operations with EEH support.
382  */
383 static inline u8 eeh_readb(const volatile void __iomem *addr)
384 {
385         u8 val = in_8(addr);
386         if (EEH_POSSIBLE_ERROR(val, u8))
387                 eeh_check_failure(addr);
388         return val;
389 }
390
391 static inline u16 eeh_readw(const volatile void __iomem *addr)
392 {
393         u16 val = in_le16(addr);
394         if (EEH_POSSIBLE_ERROR(val, u16))
395                 eeh_check_failure(addr);
396         return val;
397 }
398
399 static inline u32 eeh_readl(const volatile void __iomem *addr)
400 {
401         u32 val = in_le32(addr);
402         if (EEH_POSSIBLE_ERROR(val, u32))
403                 eeh_check_failure(addr);
404         return val;
405 }
406
407 static inline u64 eeh_readq(const volatile void __iomem *addr)
408 {
409         u64 val = in_le64(addr);
410         if (EEH_POSSIBLE_ERROR(val, u64))
411                 eeh_check_failure(addr);
412         return val;
413 }
414
415 static inline u16 eeh_readw_be(const volatile void __iomem *addr)
416 {
417         u16 val = in_be16(addr);
418         if (EEH_POSSIBLE_ERROR(val, u16))
419                 eeh_check_failure(addr);
420         return val;
421 }
422
423 static inline u32 eeh_readl_be(const volatile void __iomem *addr)
424 {
425         u32 val = in_be32(addr);
426         if (EEH_POSSIBLE_ERROR(val, u32))
427                 eeh_check_failure(addr);
428         return val;
429 }
430
431 static inline u64 eeh_readq_be(const volatile void __iomem *addr)
432 {
433         u64 val = in_be64(addr);
434         if (EEH_POSSIBLE_ERROR(val, u64))
435                 eeh_check_failure(addr);
436         return val;
437 }
438
439 static inline void eeh_memcpy_fromio(void *dest, const
440                                      volatile void __iomem *src,
441                                      unsigned long n)
442 {
443         _memcpy_fromio(dest, src, n);
444
445         /* Look for ffff's here at dest[n].  Assume that at least 4 bytes
446          * were copied. Check all four bytes.
447          */
448         if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
449                 eeh_check_failure(src);
450 }
451
452 /* in-string eeh macros */
453 static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
454                               int ns)
455 {
456         _insb(addr, buf, ns);
457         if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
458                 eeh_check_failure(addr);
459 }
460
461 static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
462                               int ns)
463 {
464         _insw(addr, buf, ns);
465         if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
466                 eeh_check_failure(addr);
467 }
468
469 static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
470                               int nl)
471 {
472         _insl(addr, buf, nl);
473         if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
474                 eeh_check_failure(addr);
475 }
476
477
478 void eeh_cache_debugfs_init(void);
479
480 #endif /* CONFIG_PPC64 */
481 #endif /* __KERNEL__ */
482 #endif /* _POWERPC_EEH_H */