arch/mips/boot/dts/brcm/bcm7362.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         #address-cells = <1>;
   4         #size-cells = <1>;
   5         compatible = "brcm,bcm7362";
   6
   7         cpus {
   8                 #address-cells = <1>;
   9                 #size-cells = <0>;
  10
  11                 mips-hpt-frequency = <375000000>;
  12
  13                 cpu@0 {
  14                         compatible = "brcm,bmips4380";
  15                         device_type = "cpu";
  16                         reg = <0>;
  17                 };
  18
  19                 cpu@1 {
  20                         compatible = "brcm,bmips4380";
  21                         device_type = "cpu";
  22                         reg = <1>;
  23                 };
  24         };
  25
  26         aliases {
  27                 uart0 = &uart0;
  28         };
  29
  30         cpu_intc: interrupt-controller {
  31                 #address-cells = <0>;
  32                 compatible = "mti,cpu-interrupt-controller";
  33
  34                 interrupt-controller;
  35                 #interrupt-cells = <1>;
  36         };
  37
  38         clocks {
  39                 uart_clk: uart_clk {
  40                         compatible = "fixed-clock";
  41                         #clock-cells = <0>;
  42                         clock-frequency = <81000000>;
  43                 };
  44
  45                 upg_clk: upg_clk {
  46                         compatible = "fixed-clock";
  47                         #clock-cells = <0>;
  48                         clock-frequency = <27000000>;
  49                 };
  50         };
  51
  52         rdb {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55
  56                 compatible = "simple-bus";
  57                 ranges = <0 0x10000000 0x01000000>;
  58
  59                 periph_intc: interrupt-controller@411400 {
  60                         compatible = "brcm,bcm7038-l1-intc";
  61                         reg = <0x411400 0x30>, <0x411600 0x30>;
  62
  63                         interrupt-controller;
  64                         #interrupt-cells = <1>;
  65
  66                         interrupt-parent = <&cpu_intc>;
  67                         interrupts = <2>, <3>;
  68                 };
  69
  70                 sun_l2_intc: interrupt-controller@403000 {
  71                         compatible = "brcm,l2-intc";
  72                         reg = <0x403000 0x30>;
  73                         interrupt-controller;
  74                         #interrupt-cells = <1>;
  75                         interrupt-parent = <&periph_intc>;
  76                         interrupts = <48>;
  77                 };
  78
  79                 gisb-arb@400000 {
  80                         compatible = "brcm,bcm7400-gisb-arb";
  81                         reg = <0x400000 0xdc>;
  82                         native-endian;
  83                         interrupt-parent = <&sun_l2_intc>;
  84                         interrupts = <0>, <2>;
  85                         brcm,gisb-arb-master-mask = <0x2f3>;
  86                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
  87                                                      "rdc_0", "raaga_0",
  88                                                      "avd_0", "jtag_0";
  89                 };
  90
  91                 upg_irq0_intc: interrupt-controller@406600 {
  92                         compatible = "brcm,bcm7120-l2-intc";
  93                         reg = <0x406600 0x8>;
  94
  95                         brcm,int-map-mask = <0x44>, <0x7000000>;
  96                         brcm,int-fwd-mask = <0x70000>;
  97
  98                         interrupt-controller;
  99                         #interrupt-cells = <1>;
 100
 101                         interrupt-parent = <&periph_intc>;
 102                         interrupts = <56>, <54>;
 103                         interrupt-names = "upg_main", "upg_bsc";
 104                 };
 105
 106                 upg_aon_irq0_intc: interrupt-controller@408b80 {
 107                         compatible = "brcm,bcm7120-l2-intc";
 108                         reg = <0x408b80 0x8>;
 109
 110                         brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
 111                         brcm,int-fwd-mask = <0>;
 112                         brcm,irq-can-wake;
 113
 114                         interrupt-controller;
 115                         #interrupt-cells = <1>;
 116
 117                         interrupt-parent = <&periph_intc>;
 118                         interrupts = <57>, <55>, <59>;
 119                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 120                                           "upg_spi";
 121                 };
 122
 123                 sun_top_ctrl: syscon@404000 {
 124                         compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
 125                         reg = <0x404000 0x51c>;
 126                         native-endian;
 127                 };
 128
 129                 reboot {
 130                         compatible = "brcm,brcmstb-reboot";
 131                         syscon = <&sun_top_ctrl 0x304 0x308>;
 132                 };
 133
 134                 uart0: serial@406800 {
 135                         compatible = "ns16550a";
 136                         reg = <0x406800 0x20>;
 137                         reg-io-width = <0x4>;
 138                         reg-shift = <0x2>;
 139                         native-endian;
 140                         interrupt-parent = <&periph_intc>;
 141                         interrupts = <61>;
 142                         clocks = <&uart_clk>;
 143                         status = "disabled";
 144                 };
 145
 146                 uart1: serial@406840 {
 147                         compatible = "ns16550a";
 148                         reg = <0x406840 0x20>;
 149                         reg-io-width = <0x4>;
 150                         reg-shift = <0x2>;
 151                         native-endian;
 152                         interrupt-parent = <&periph_intc>;
 153                         interrupts = <62>;
 154                         clocks = <&uart_clk>;
 155                         status = "disabled";
 156                 };
 157
 158                 uart2: serial@406880 {
 159                         compatible = "ns16550a";
 160                         reg = <0x406880 0x20>;
 161                         reg-io-width = <0x4>;
 162                         reg-shift = <0x2>;
 163                         native-endian;
 164                         interrupt-parent = <&periph_intc>;
 165                         interrupts = <63>;
 166                         clocks = <&uart_clk>;
 167                         status = "disabled";
 168                 };
 169
 170                 bsca: i2c@406200 {
 171                       clock-frequency = <390000>;
 172                       compatible = "brcm,brcmstb-i2c";
 173                       interrupt-parent = <&upg_irq0_intc>;
 174                       reg = <0x406200 0x58>;
 175                       interrupts = <24>;
 176                       interrupt-names = "upg_bsca";
 177                       status = "disabled";
 178                 };
 179
 180                 bscb: i2c@406280 {
 181                       clock-frequency = <390000>;
 182                       compatible = "brcm,brcmstb-i2c";
 183                       interrupt-parent = <&upg_irq0_intc>;
 184                       reg = <0x406280 0x58>;
 185                       interrupts = <25>;
 186                       interrupt-names = "upg_bscb";
 187                       status = "disabled";
 188                 };
 189
 190                 bscd: i2c@408980 {
 191                       clock-frequency = <390000>;
 192                       compatible = "brcm,brcmstb-i2c";
 193                       interrupt-parent = <&upg_aon_irq0_intc>;
 194                       reg = <0x408980 0x58>;
 195                       interrupts = <27>;
 196                       interrupt-names = "upg_bscd";
 197                       status = "disabled";
 198                 };
 199
 200                 pwma: pwm@406400 {
 201                         compatible = "brcm,bcm7038-pwm";
 202                         reg = <0x406400 0x28>;
 203                         #pwm-cells = <2>;
 204                         clocks = <&upg_clk>;
 205                         status = "disabled";
 206                 };
 207
 208                 aon_pm_l2_intc: interrupt-controller@408440 {
 209                         compatible = "brcm,l2-intc";
 210                         reg = <0x408440 0x30>;
 211                         interrupt-controller;
 212                         #interrupt-cells = <1>;
 213                         interrupt-parent = <&periph_intc>;
 214                         interrupts = <50>;
 215                         brcm,irq-can-wake;
 216                 };
 217
 218                 upg_gio: gpio@406500 {
 219                         compatible = "brcm,brcmstb-gpio";
 220                         reg = <0x406500 0xa0>;
 221                         #gpio-cells = <2>;
 222                         #interrupt-cells = <2>;
 223                         gpio-controller;
 224                         interrupt-controller;
 225                         interrupt-parent = <&upg_irq0_intc>;
 226                         interrupts = <6>;
 227                         brcm,gpio-bank-widths = <32 32 32 29 4>;
 228                 };
 229
 230                 upg_gio_aon: gpio@408c00 {
 231                         compatible = "brcm,brcmstb-gpio";
 232                         reg = <0x408c00 0x60>;
 233                         #gpio-cells = <2>;
 234                         #interrupt-cells = <2>;
 235                         gpio-controller;
 236                         interrupt-controller;
 237                         interrupt-parent = <&upg_aon_irq0_intc>;
 238                         interrupts = <6>;
 239                         interrupts-extended = <&upg_aon_irq0_intc 6>,
 240                                               <&aon_pm_l2_intc 5>;
 241                         wakeup-source;
 242                         brcm,gpio-bank-widths = <21 32 2>;
 243                 };
 244
 245                 enet0: ethernet@430000 {
 246                         phy-mode = "internal";
 247                         phy-handle = <&phy1>;
 248                         mac-address = [ 00 10 18 36 23 1a ];
 249                         compatible = "brcm,genet-v2";
 250                         #address-cells = <0x1>;
 251                         #size-cells = <0x1>;
 252                         reg = <0x430000 0x4c8c>;
 253                         interrupts = <24>, <25>;
 254                         interrupt-parent = <&periph_intc>;
 255                         status = "disabled";
 256
 257                         mdio@e14 {
 258                                 compatible = "brcm,genet-mdio-v2";
 259                                 #address-cells = <0x1>;
 260                                 #size-cells = <0x0>;
 261                                 reg = <0xe14 0x8>;
 262
 263                                 phy1: ethernet-phy@1 {
 264                                         max-speed = <100>;
 265                                         reg = <0x1>;
 266                                         compatible = "brcm,40nm-ephy",
 267                                                 "ethernet-phy-ieee802.3-c22";
 268                                 };
 269                         };
 270                 };
 271
 272                 ehci0: usb@480300 {
 273                         compatible = "brcm,bcm7362-ehci", "generic-ehci";
 274                         reg = <0x480300 0x100>;
 275                         native-endian;
 276                         interrupt-parent = <&periph_intc>;
 277                         interrupts = <65>;
 278                         status = "disabled";
 279                 };
 280
 281                 ohci0: usb@480400 {
 282                         compatible = "brcm,bcm7362-ohci", "generic-ohci";
 283                         reg = <0x480400 0x100>;
 284                         native-endian;
 285                         no-big-frame-no;
 286                         interrupt-parent = <&periph_intc>;
 287                         interrupts = <66>;
 288                         status = "disabled";
 289                 };
 290
 291                 hif_l2_intc: interrupt-controller@411000 {
 292                         compatible = "brcm,l2-intc";
 293                         reg = <0x411000 0x30>;
 294                         interrupt-controller;
 295                         #interrupt-cells = <1>;
 296                         interrupt-parent = <&periph_intc>;
 297                         interrupts = <30>;
 298                 };
 299
 300                 nand: nand@412800 {
 301                         compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
 302                         #address-cells = <1>;
 303                         #size-cells = <0>;
 304                         reg-names = "nand";
 305                         reg = <0x412800 0x400>;
 306                         interrupt-parent = <&hif_l2_intc>;
 307                         interrupts = <24>;
 308                         status = "disabled";
 309                 };
 310
 311                 sata: sata@181000 {
 312                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 313                         reg-names = "ahci", "top-ctrl";
 314                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 315                         interrupt-parent = <&periph_intc>;
 316                         interrupts = <86>;
 317                         #address-cells = <1>;
 318                         #size-cells = <0>;
 319                         status = "disabled";
 320
 321                         sata0: sata-port@0 {
 322                                 reg = <0>;
 323                                 phys = <&sata_phy0>;
 324                         };
 325
 326                         sata1: sata-port@1 {
 327                                 reg = <1>;
 328                                 phys = <&sata_phy1>;
 329                         };
 330                 };
 331
 332                 sata_phy: sata-phy@180100 {
 333                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 334                         reg = <0x180100 0x0eff>;
 335                         reg-names = "phy";
 336                         #address-cells = <1>;
 337                         #size-cells = <0>;
 338                         status = "disabled";
 339
 340                         sata_phy0: sata-phy@0 {
 341                                 reg = <0>;
 342                                 #phy-cells = <0>;
 343                         };
 344
 345                         sata_phy1: sata-phy@1 {
 346                                 reg = <1>;
 347                                 #phy-cells = <0>;
 348                         };
 349                 };
 350
 351                 sdhci0: sdhci@410000 {
 352                         compatible = "brcm,bcm7425-sdhci";
 353                         reg = <0x410000 0x100>;
 354                         interrupt-parent = <&periph_intc>;
 355                         interrupts = <82>;
 356                         status = "disabled";
 357                 };
 358
 359                 spi_l2_intc: interrupt-controller@411d00 {
 360                         compatible = "brcm,l2-intc";
 361                         reg = <0x411d00 0x30>;
 362                         interrupt-controller;
 363                         #interrupt-cells = <1>;
 364                         interrupt-parent = <&periph_intc>;
 365                         interrupts = <31>;
 366                 };
 367
 368                 qspi: spi@413000 {
 369                         #address-cells = <0x1>;
 370                         #size-cells = <0x0>;
 371                         compatible = "brcm,spi-bcm-qspi",
 372                                      "brcm,spi-brcmstb-qspi";
 373                         clocks = <&upg_clk>;
 374                         reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
 375                         reg-names = "cs_reg", "hif_mspi", "bspi";
 376                         interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
 377                         interrupt-parent = <&spi_l2_intc>;
 378                         interrupt-names = "spi_lr_fullness_reached",
 379                                           "spi_lr_session_aborted",
 380                                           "spi_lr_impatient",
 381                                           "spi_lr_session_done",
 382                                           "spi_lr_overread",
 383                                           "mspi_done",
 384                                           "mspi_halted";
 385                         status = "disabled";
 386                 };
 387
 388                 mspi: spi@408a00 {
 389                         #address-cells = <1>;
 390                         #size-cells = <0>;
 391                         compatible = "brcm,spi-bcm-qspi",
 392                                      "brcm,spi-brcmstb-mspi";
 393                         clocks = <&upg_clk>;
 394                         reg = <0x408a00 0x180>;
 395                         reg-names = "mspi";
 396                         interrupts = <0x14>;
 397                         interrupt-parent = <&upg_aon_irq0_intc>;
 398                         interrupt-names = "mspi_done";
 399                         status = "disabled";
 400                 };
 401         };
 402 };