1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020, Linaro Limited
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
8 #include <dt-bindings/clock/qcom,rpmh.h>
9 #include <dt-bindings/dma/qcom-gpi.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interconnect/qcom,sm8350.h>
12 #include <dt-bindings/mailbox/qcom-ipcc.h>
13 #include <dt-bindings/power/qcom-rpmpd.h>
14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
15 #include <dt-bindings/thermal/thermal.h>
16 #include <dt-bindings/interconnect/qcom,sm8350.h>
19 interrupt-parent = <&intc>;
28 compatible = "fixed-clock";
30 clock-frequency = <38400000>;
31 clock-output-names = "xo_board";
34 sleep_clk: sleep-clk {
35 compatible = "fixed-clock";
36 clock-frequency = <32000>;
40 ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 {
41 compatible = "fixed-clock";
42 clock-frequency = <1000>;
46 ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 {
47 compatible = "fixed-clock";
48 clock-frequency = <1000>;
52 ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 {
53 compatible = "fixed-clock";
54 clock-frequency = <1000>;
65 compatible = "qcom,kryo685";
67 enable-method = "psci";
68 next-level-cache = <&L2_0>;
69 qcom,freq-domain = <&cpufreq_hw 0>;
70 power-domains = <&CPU_PD0>;
71 power-domain-names = "psci";
75 next-level-cache = <&L3_0>;
84 compatible = "qcom,kryo685";
86 enable-method = "psci";
87 next-level-cache = <&L2_100>;
88 qcom,freq-domain = <&cpufreq_hw 0>;
89 power-domains = <&CPU_PD1>;
90 power-domain-names = "psci";
94 next-level-cache = <&L3_0>;
100 compatible = "qcom,kryo685";
102 enable-method = "psci";
103 next-level-cache = <&L2_200>;
104 qcom,freq-domain = <&cpufreq_hw 0>;
105 power-domains = <&CPU_PD2>;
106 power-domain-names = "psci";
107 #cooling-cells = <2>;
109 compatible = "cache";
110 next-level-cache = <&L3_0>;
116 compatible = "qcom,kryo685";
118 enable-method = "psci";
119 next-level-cache = <&L2_300>;
120 qcom,freq-domain = <&cpufreq_hw 0>;
121 power-domains = <&CPU_PD3>;
122 power-domain-names = "psci";
123 #cooling-cells = <2>;
125 compatible = "cache";
126 next-level-cache = <&L3_0>;
132 compatible = "qcom,kryo685";
134 enable-method = "psci";
135 next-level-cache = <&L2_400>;
136 qcom,freq-domain = <&cpufreq_hw 1>;
137 power-domains = <&CPU_PD4>;
138 power-domain-names = "psci";
139 #cooling-cells = <2>;
141 compatible = "cache";
142 next-level-cache = <&L3_0>;
148 compatible = "qcom,kryo685";
150 enable-method = "psci";
151 next-level-cache = <&L2_500>;
152 qcom,freq-domain = <&cpufreq_hw 1>;
153 power-domains = <&CPU_PD5>;
154 power-domain-names = "psci";
155 #cooling-cells = <2>;
157 compatible = "cache";
158 next-level-cache = <&L3_0>;
165 compatible = "qcom,kryo685";
167 enable-method = "psci";
168 next-level-cache = <&L2_600>;
169 qcom,freq-domain = <&cpufreq_hw 1>;
170 power-domains = <&CPU_PD6>;
171 power-domain-names = "psci";
172 #cooling-cells = <2>;
174 compatible = "cache";
175 next-level-cache = <&L3_0>;
181 compatible = "qcom,kryo685";
183 enable-method = "psci";
184 next-level-cache = <&L2_700>;
185 qcom,freq-domain = <&cpufreq_hw 2>;
186 power-domains = <&CPU_PD7>;
187 power-domain-names = "psci";
188 #cooling-cells = <2>;
190 compatible = "cache";
191 next-level-cache = <&L3_0>;
232 entry-method = "psci";
234 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
235 compatible = "arm,idle-state";
236 idle-state-name = "silver-rail-power-collapse";
237 arm,psci-suspend-param = <0x40000004>;
238 entry-latency-us = <355>;
239 exit-latency-us = <909>;
240 min-residency-us = <3934>;
244 BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
245 compatible = "arm,idle-state";
246 idle-state-name = "gold-rail-power-collapse";
247 arm,psci-suspend-param = <0x40000004>;
248 entry-latency-us = <241>;
249 exit-latency-us = <1461>;
250 min-residency-us = <4488>;
256 CLUSTER_SLEEP_0: cluster-sleep-0 {
257 compatible = "domain-idle-state";
258 idle-state-name = "cluster-power-collapse";
259 arm,psci-suspend-param = <0x4100c344>;
260 entry-latency-us = <3263>;
261 exit-latency-us = <6562>;
262 min-residency-us = <9987>;
270 compatible = "qcom,scm-sm8350", "qcom,scm";
276 device_type = "memory";
277 /* We expect the bootloader to fill in the size */
278 reg = <0x0 0x80000000 0x0 0x0>;
282 compatible = "arm,armv8-pmuv3";
283 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
287 compatible = "arm,psci-1.0";
291 #power-domain-cells = <0>;
292 power-domains = <&CLUSTER_PD>;
293 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
297 #power-domain-cells = <0>;
298 power-domains = <&CLUSTER_PD>;
299 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
303 #power-domain-cells = <0>;
304 power-domains = <&CLUSTER_PD>;
305 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
309 #power-domain-cells = <0>;
310 power-domains = <&CLUSTER_PD>;
311 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
315 #power-domain-cells = <0>;
316 power-domains = <&CLUSTER_PD>;
317 domain-idle-states = <&BIG_CPU_SLEEP_0>;
321 #power-domain-cells = <0>;
322 power-domains = <&CLUSTER_PD>;
323 domain-idle-states = <&BIG_CPU_SLEEP_0>;
327 #power-domain-cells = <0>;
328 power-domains = <&CLUSTER_PD>;
329 domain-idle-states = <&BIG_CPU_SLEEP_0>;
333 #power-domain-cells = <0>;
334 power-domains = <&CLUSTER_PD>;
335 domain-idle-states = <&BIG_CPU_SLEEP_0>;
338 CLUSTER_PD: cpu-cluster0 {
339 #power-domain-cells = <0>;
340 domain-idle-states = <&CLUSTER_SLEEP_0>;
344 reserved_memory: reserved-memory {
345 #address-cells = <2>;
349 hyp_mem: memory@80000000 {
350 reg = <0x0 0x80000000 0x0 0x600000>;
354 xbl_aop_mem: memory@80700000 {
356 reg = <0x0 0x80700000 0x0 0x160000>;
359 cmd_db: memory@80860000 {
360 compatible = "qcom,cmd-db";
361 reg = <0x0 0x80860000 0x0 0x20000>;
365 reserved_xbl_uefi_log: memory@80880000 {
366 reg = <0x0 0x80880000 0x0 0x14000>;
370 smem_mem: memory@80900000 {
371 reg = <0x0 0x80900000 0x0 0x200000>;
375 cpucp_fw_mem: memory@80b00000 {
376 reg = <0x0 0x80b00000 0x0 0x100000>;
380 cdsp_secure_heap: memory@80c00000 {
381 reg = <0x0 0x80c00000 0x0 0x4600000>;
385 pil_camera_mem: mmeory@85200000 {
386 reg = <0x0 0x85200000 0x0 0x500000>;
390 pil_video_mem: memory@85700000 {
391 reg = <0x0 0x85700000 0x0 0x500000>;
395 pil_cvp_mem: memory@85c00000 {
396 reg = <0x0 0x85c00000 0x0 0x500000>;
400 pil_adsp_mem: memory@86100000 {
401 reg = <0x0 0x86100000 0x0 0x2100000>;
405 pil_slpi_mem: memory@88200000 {
406 reg = <0x0 0x88200000 0x0 0x1500000>;
410 pil_cdsp_mem: memory@89700000 {
411 reg = <0x0 0x89700000 0x0 0x1e00000>;
415 pil_ipa_fw_mem: memory@8b500000 {
416 reg = <0x0 0x8b500000 0x0 0x10000>;
420 pil_ipa_gsi_mem: memory@8b510000 {
421 reg = <0x0 0x8b510000 0x0 0xa000>;
425 pil_gpu_mem: memory@8b51a000 {
426 reg = <0x0 0x8b51a000 0x0 0x2000>;
430 pil_spss_mem: memory@8b600000 {
431 reg = <0x0 0x8b600000 0x0 0x100000>;
435 pil_modem_mem: memory@8b800000 {
436 reg = <0x0 0x8b800000 0x0 0x10000000>;
440 rmtfs_mem: memory@9b800000 {
441 compatible = "qcom,rmtfs-mem";
442 reg = <0x0 0x9b800000 0x0 0x280000>;
445 qcom,client-id = <1>;
449 hyp_reserved_mem: memory@d0000000 {
450 reg = <0x0 0xd0000000 0x0 0x800000>;
454 pil_trustedvm_mem: memory@d0800000 {
455 reg = <0x0 0xd0800000 0x0 0x76f7000>;
459 qrtr_shbuf: memory@d7ef7000 {
460 reg = <0x0 0xd7ef7000 0x0 0x9000>;
464 chan0_shbuf: memory@d7f00000 {
465 reg = <0x0 0xd7f00000 0x0 0x80000>;
469 chan1_shbuf: memory@d7f80000 {
470 reg = <0x0 0xd7f80000 0x0 0x80000>;
474 removed_mem: memory@d8800000 {
475 reg = <0x0 0xd8800000 0x0 0x6800000>;
481 compatible = "qcom,smem";
482 memory-region = <&smem_mem>;
483 hwlocks = <&tcsr_mutex 3>;
487 compatible = "qcom,smp2p";
488 qcom,smem = <443>, <429>;
489 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
490 IPCC_MPROC_SIGNAL_SMP2P
491 IRQ_TYPE_EDGE_RISING>;
492 mboxes = <&ipcc IPCC_CLIENT_LPASS
493 IPCC_MPROC_SIGNAL_SMP2P>;
495 qcom,local-pid = <0>;
496 qcom,remote-pid = <2>;
498 smp2p_adsp_out: master-kernel {
499 qcom,entry-name = "master-kernel";
500 #qcom,smem-state-cells = <1>;
503 smp2p_adsp_in: slave-kernel {
504 qcom,entry-name = "slave-kernel";
505 interrupt-controller;
506 #interrupt-cells = <2>;
511 compatible = "qcom,smp2p";
512 qcom,smem = <94>, <432>;
513 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
514 IPCC_MPROC_SIGNAL_SMP2P
515 IRQ_TYPE_EDGE_RISING>;
516 mboxes = <&ipcc IPCC_CLIENT_CDSP
517 IPCC_MPROC_SIGNAL_SMP2P>;
519 qcom,local-pid = <0>;
520 qcom,remote-pid = <5>;
522 smp2p_cdsp_out: master-kernel {
523 qcom,entry-name = "master-kernel";
524 #qcom,smem-state-cells = <1>;
527 smp2p_cdsp_in: slave-kernel {
528 qcom,entry-name = "slave-kernel";
529 interrupt-controller;
530 #interrupt-cells = <2>;
535 compatible = "qcom,smp2p";
536 qcom,smem = <435>, <428>;
537 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
538 IPCC_MPROC_SIGNAL_SMP2P
539 IRQ_TYPE_EDGE_RISING>;
540 mboxes = <&ipcc IPCC_CLIENT_MPSS
541 IPCC_MPROC_SIGNAL_SMP2P>;
543 qcom,local-pid = <0>;
544 qcom,remote-pid = <1>;
546 smp2p_modem_out: master-kernel {
547 qcom,entry-name = "master-kernel";
548 #qcom,smem-state-cells = <1>;
551 smp2p_modem_in: slave-kernel {
552 qcom,entry-name = "slave-kernel";
553 interrupt-controller;
554 #interrupt-cells = <2>;
557 ipa_smp2p_out: ipa-ap-to-modem {
558 qcom,entry-name = "ipa";
559 #qcom,smem-state-cells = <1>;
562 ipa_smp2p_in: ipa-modem-to-ap {
563 qcom,entry-name = "ipa";
564 interrupt-controller;
565 #interrupt-cells = <2>;
570 compatible = "qcom,smp2p";
571 qcom,smem = <481>, <430>;
572 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
573 IPCC_MPROC_SIGNAL_SMP2P
574 IRQ_TYPE_EDGE_RISING>;
575 mboxes = <&ipcc IPCC_CLIENT_SLPI
576 IPCC_MPROC_SIGNAL_SMP2P>;
578 qcom,local-pid = <0>;
579 qcom,remote-pid = <3>;
581 smp2p_slpi_out: master-kernel {
582 qcom,entry-name = "master-kernel";
583 #qcom,smem-state-cells = <1>;
586 smp2p_slpi_in: slave-kernel {
587 qcom,entry-name = "slave-kernel";
588 interrupt-controller;
589 #interrupt-cells = <2>;
594 #address-cells = <2>;
596 ranges = <0 0 0 0 0x10 0>;
597 dma-ranges = <0 0 0 0 0x10 0>;
598 compatible = "simple-bus";
600 gcc: clock-controller@100000 {
601 compatible = "qcom,gcc-sm8350";
602 reg = <0x0 0x00100000 0x0 0x1f0000>;
605 #power-domain-cells = <1>;
606 clock-names = "bi_tcxo",
610 "ufs_card_rx_symbol_0_clk",
611 "ufs_card_rx_symbol_1_clk",
612 "ufs_card_tx_symbol_0_clk",
613 "ufs_phy_rx_symbol_0_clk",
614 "ufs_phy_rx_symbol_1_clk",
615 "ufs_phy_tx_symbol_0_clk",
616 "usb3_phy_wrapper_gcc_usb30_pipe_clk",
617 "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
618 clocks = <&rpmhcc RPMH_CXO_CLK>,
625 <&ufs_phy_rx_symbol_0_clk>,
626 <&ufs_phy_rx_symbol_1_clk>,
627 <&ufs_phy_tx_symbol_0_clk>,
632 ipcc: mailbox@408000 {
633 compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
634 reg = <0 0x00408000 0 0x1000>;
635 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
636 interrupt-controller;
637 #interrupt-cells = <3>;
641 qup_opp_table_100mhz: qup-100mhz-opp-table {
642 compatible = "operating-points-v2";
645 opp-hz = /bits/ 64 <50000000>;
646 required-opps = <&rpmhpd_opp_min_svs>;
650 opp-hz = /bits/ 64 <75000000>;
651 required-opps = <&rpmhpd_opp_low_svs>;
655 opp-hz = /bits/ 64 <100000000>;
656 required-opps = <&rpmhpd_opp_svs>;
660 qup_opp_table_120mhz: qup-120mhz-opp-table {
661 compatible = "operating-points-v2";
664 opp-hz = /bits/ 64 <50000000>;
665 required-opps = <&rpmhpd_opp_min_svs>;
669 opp-hz = /bits/ 64 <75000000>;
670 required-opps = <&rpmhpd_opp_low_svs>;
674 opp-hz = /bits/ 64 <120000000>;
675 required-opps = <&rpmhpd_opp_svs>;
679 gpi_dma2: dma-controller@800000 {
680 compatible = "qcom,sm8350-gpi-dma";
681 reg = <0 0x00800000 0 0x60000>;
682 interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
683 <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
684 <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
685 <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
686 <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
687 <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
688 <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
689 <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
690 <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
691 <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
692 <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
693 <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
695 dma-channel-mask = <0xff>;
696 iommus = <&apps_smmu 0x5f6 0x0>;
701 qupv3_id_2: geniqup@8c0000 {
702 compatible = "qcom,geni-se-qup";
703 reg = <0x0 0x008c0000 0x0 0x6000>;
704 clock-names = "m-ahb", "s-ahb";
705 clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
706 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
707 iommus = <&apps_smmu 0x5e3 0x0>;
708 #address-cells = <2>;
714 compatible = "qcom,geni-i2c";
715 reg = <0 0x00880000 0 0x4000>;
717 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
718 pinctrl-names = "default";
719 pinctrl-0 = <&qup_i2c14_default>;
720 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
721 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
722 <&gpi_dma2 1 0 QCOM_GPI_I2C>;
723 dma-names = "tx", "rx";
724 #address-cells = <1>;
730 compatible = "qcom,geni-spi";
731 reg = <0 0x00880000 0 0x4000>;
733 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
734 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
735 power-domains = <&rpmhpd SM8350_CX>;
736 operating-points-v2 = <&qup_opp_table_120mhz>;
737 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
738 <&gpi_dma2 1 0 QCOM_GPI_SPI>;
739 dma-names = "tx", "rx";
740 #address-cells = <1>;
746 compatible = "qcom,geni-i2c";
747 reg = <0 0x00884000 0 0x4000>;
749 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
750 pinctrl-names = "default";
751 pinctrl-0 = <&qup_i2c15_default>;
752 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
753 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
754 <&gpi_dma2 1 1 QCOM_GPI_I2C>;
755 dma-names = "tx", "rx";
756 #address-cells = <1>;
762 compatible = "qcom,geni-spi";
763 reg = <0 0x00884000 0 0x4000>;
765 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
766 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
767 power-domains = <&rpmhpd SM8350_CX>;
768 operating-points-v2 = <&qup_opp_table_120mhz>;
769 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
770 <&gpi_dma2 1 1 QCOM_GPI_SPI>;
771 dma-names = "tx", "rx";
772 #address-cells = <1>;
778 compatible = "qcom,geni-i2c";
779 reg = <0 0x00888000 0 0x4000>;
781 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
782 pinctrl-names = "default";
783 pinctrl-0 = <&qup_i2c16_default>;
784 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
785 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
786 <&gpi_dma2 1 2 QCOM_GPI_I2C>;
787 dma-names = "tx", "rx";
788 #address-cells = <1>;
794 compatible = "qcom,geni-spi";
795 reg = <0 0x00888000 0 0x4000>;
797 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
798 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
799 power-domains = <&rpmhpd SM8350_CX>;
800 operating-points-v2 = <&qup_opp_table_100mhz>;
801 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
802 <&gpi_dma2 1 2 QCOM_GPI_SPI>;
803 dma-names = "tx", "rx";
804 #address-cells = <1>;
810 compatible = "qcom,geni-i2c";
811 reg = <0 0x0088c000 0 0x4000>;
813 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
814 pinctrl-names = "default";
815 pinctrl-0 = <&qup_i2c17_default>;
816 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
817 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
818 <&gpi_dma2 1 3 QCOM_GPI_I2C>;
819 dma-names = "tx", "rx";
820 #address-cells = <1>;
826 compatible = "qcom,geni-spi";
827 reg = <0 0x0088c000 0 0x4000>;
829 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
830 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
831 power-domains = <&rpmhpd SM8350_CX>;
832 operating-points-v2 = <&qup_opp_table_100mhz>;
833 dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
834 <&gpi_dma2 1 3 QCOM_GPI_SPI>;
835 dma-names = "tx", "rx";
836 #address-cells = <1>;
841 /* QUP no. 18 seems to be strictly SPI/UART-only */
844 compatible = "qcom,geni-spi";
845 reg = <0 0x00890000 0 0x4000>;
847 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
848 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
849 power-domains = <&rpmhpd SM8350_CX>;
850 operating-points-v2 = <&qup_opp_table_100mhz>;
851 dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
852 <&gpi_dma2 1 4 QCOM_GPI_SPI>;
853 dma-names = "tx", "rx";
854 #address-cells = <1>;
859 uart18: serial@890000 {
860 compatible = "qcom,geni-uart";
861 reg = <0 0x00890000 0 0x4000>;
863 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
864 pinctrl-names = "default";
865 pinctrl-0 = <&qup_uart18_default>;
866 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
867 power-domains = <&rpmhpd SM8350_CX>;
868 operating-points-v2 = <&qup_opp_table_100mhz>;
873 compatible = "qcom,geni-i2c";
874 reg = <0 0x00894000 0 0x4000>;
876 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
877 pinctrl-names = "default";
878 pinctrl-0 = <&qup_i2c19_default>;
879 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
880 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
881 <&gpi_dma2 1 5 QCOM_GPI_I2C>;
882 dma-names = "tx", "rx";
883 #address-cells = <1>;
889 compatible = "qcom,geni-spi";
890 reg = <0 0x00894000 0 0x4000>;
892 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
893 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
894 power-domains = <&rpmhpd SM8350_CX>;
895 operating-points-v2 = <&qup_opp_table_100mhz>;
896 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
897 <&gpi_dma2 1 5 QCOM_GPI_SPI>;
898 dma-names = "tx", "rx";
899 #address-cells = <1>;
905 gpi_dma0: dma-controller@900000 {
906 compatible = "qcom,sm8350-gpi-dma";
907 reg = <0 0x09800000 0 0x60000>;
908 interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
909 <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
910 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
911 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
912 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
913 <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
914 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
915 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
916 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
917 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
918 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
919 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
921 dma-channel-mask = <0x7e>;
922 iommus = <&apps_smmu 0x5b6 0x0>;
927 qupv3_id_0: geniqup@9c0000 {
928 compatible = "qcom,geni-se-qup";
929 reg = <0x0 0x009c0000 0x0 0x6000>;
930 clock-names = "m-ahb", "s-ahb";
931 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
932 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
933 iommus = <&apps_smmu 0x5a3 0>;
934 #address-cells = <2>;
940 compatible = "qcom,geni-i2c";
941 reg = <0 0x00980000 0 0x4000>;
943 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
944 pinctrl-names = "default";
945 pinctrl-0 = <&qup_i2c0_default>;
946 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
947 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
948 <&gpi_dma0 1 0 QCOM_GPI_I2C>;
949 dma-names = "tx", "rx";
950 #address-cells = <1>;
956 compatible = "qcom,geni-spi";
957 reg = <0 0x00980000 0 0x4000>;
959 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
960 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
961 power-domains = <&rpmhpd SM8350_CX>;
962 operating-points-v2 = <&qup_opp_table_100mhz>;
963 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
964 <&gpi_dma0 1 0 QCOM_GPI_SPI>;
965 dma-names = "tx", "rx";
966 #address-cells = <1>;
972 compatible = "qcom,geni-i2c";
973 reg = <0 0x00984000 0 0x4000>;
975 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
976 pinctrl-names = "default";
977 pinctrl-0 = <&qup_i2c1_default>;
978 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
979 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
980 <&gpi_dma0 1 1 QCOM_GPI_I2C>;
981 dma-names = "tx", "rx";
982 #address-cells = <1>;
988 compatible = "qcom,geni-spi";
989 reg = <0 0x00984000 0 0x4000>;
991 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
992 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
993 power-domains = <&rpmhpd SM8350_CX>;
994 operating-points-v2 = <&qup_opp_table_100mhz>;
995 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
996 <&gpi_dma0 1 1 QCOM_GPI_SPI>;
997 dma-names = "tx", "rx";
998 #address-cells = <1>;
1000 status = "disabled";
1004 compatible = "qcom,geni-i2c";
1005 reg = <0 0x00988000 0 0x4000>;
1007 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1008 pinctrl-names = "default";
1009 pinctrl-0 = <&qup_i2c2_default>;
1010 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1011 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1012 <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1013 dma-names = "tx", "rx";
1014 #address-cells = <1>;
1016 status = "disabled";
1020 compatible = "qcom,geni-spi";
1021 reg = <0 0x00988000 0 0x4000>;
1023 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1024 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1025 power-domains = <&rpmhpd SM8350_CX>;
1026 operating-points-v2 = <&qup_opp_table_100mhz>;
1027 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1028 <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1029 dma-names = "tx", "rx";
1030 #address-cells = <1>;
1032 status = "disabled";
1035 uart2: serial@98c000 {
1036 compatible = "qcom,geni-debug-uart";
1037 reg = <0 0x0098c000 0 0x4000>;
1039 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1040 pinctrl-names = "default";
1041 pinctrl-0 = <&qup_uart3_default_state>;
1042 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1043 power-domains = <&rpmhpd SM8350_CX>;
1044 operating-points-v2 = <&qup_opp_table_100mhz>;
1045 #address-cells = <1>;
1047 status = "disabled";
1050 /* QUP no. 3 seems to be strictly SPI-only */
1053 compatible = "qcom,geni-spi";
1054 reg = <0 0x0098c000 0 0x4000>;
1056 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1057 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1058 power-domains = <&rpmhpd SM8350_CX>;
1059 operating-points-v2 = <&qup_opp_table_100mhz>;
1060 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1061 <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1062 dma-names = "tx", "rx";
1063 #address-cells = <1>;
1065 status = "disabled";
1069 compatible = "qcom,geni-i2c";
1070 reg = <0 0x00990000 0 0x4000>;
1072 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1073 pinctrl-names = "default";
1074 pinctrl-0 = <&qup_i2c4_default>;
1075 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1076 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1077 <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1078 dma-names = "tx", "rx";
1079 #address-cells = <1>;
1081 status = "disabled";
1085 compatible = "qcom,geni-spi";
1086 reg = <0 0x00990000 0 0x4000>;
1088 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1089 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1090 power-domains = <&rpmhpd SM8350_CX>;
1091 operating-points-v2 = <&qup_opp_table_100mhz>;
1092 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1093 <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1094 dma-names = "tx", "rx";
1095 #address-cells = <1>;
1097 status = "disabled";
1101 compatible = "qcom,geni-i2c";
1102 reg = <0 0x00994000 0 0x4000>;
1104 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1105 pinctrl-names = "default";
1106 pinctrl-0 = <&qup_i2c5_default>;
1107 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1108 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1109 <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1110 dma-names = "tx", "rx";
1111 #address-cells = <1>;
1113 status = "disabled";
1117 compatible = "qcom,geni-spi";
1118 reg = <0 0x00994000 0 0x4000>;
1120 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1121 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1122 power-domains = <&rpmhpd SM8350_CX>;
1123 operating-points-v2 = <&qup_opp_table_100mhz>;
1124 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1125 <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1126 dma-names = "tx", "rx";
1127 #address-cells = <1>;
1129 status = "disabled";
1133 compatible = "qcom,geni-i2c";
1134 reg = <0 0x00998000 0 0x4000>;
1136 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1137 pinctrl-names = "default";
1138 pinctrl-0 = <&qup_i2c6_default>;
1139 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1140 dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1141 <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1142 dma-names = "tx", "rx";
1143 #address-cells = <1>;
1145 status = "disabled";
1149 compatible = "qcom,geni-spi";
1150 reg = <0 0x00998000 0 0x4000>;
1152 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1153 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1154 power-domains = <&rpmhpd SM8350_CX>;
1155 operating-points-v2 = <&qup_opp_table_100mhz>;
1156 dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1157 <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1158 dma-names = "tx", "rx";
1159 #address-cells = <1>;
1161 status = "disabled";
1164 uart6: serial@998000 {
1165 compatible = "qcom,geni-uart";
1166 reg = <0 0x00998000 0 0x4000>;
1168 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1169 pinctrl-names = "default";
1170 pinctrl-0 = <&qup_uart6_default>;
1171 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1172 power-domains = <&rpmhpd SM8350_CX>;
1173 operating-points-v2 = <&qup_opp_table_100mhz>;
1174 status = "disabled";
1178 compatible = "qcom,geni-i2c";
1179 reg = <0 0x0099c000 0 0x4000>;
1181 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1182 pinctrl-names = "default";
1183 pinctrl-0 = <&qup_i2c7_default>;
1184 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1185 dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
1186 <&gpi_dma0 1 7 QCOM_GPI_I2C>;
1187 dma-names = "tx", "rx";
1188 #address-cells = <1>;
1190 status = "disabled";
1194 compatible = "qcom,geni-spi";
1195 reg = <0 0x0099c000 0 0x4000>;
1197 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1198 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1199 power-domains = <&rpmhpd SM8350_CX>;
1200 operating-points-v2 = <&qup_opp_table_100mhz>;
1201 dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
1202 <&gpi_dma0 1 7 QCOM_GPI_SPI>;
1203 dma-names = "tx", "rx";
1204 #address-cells = <1>;
1206 status = "disabled";
1210 gpi_dma1: dma-controller@a00000 {
1211 compatible = "qcom,sm8350-gpi-dma";
1212 reg = <0 0x00a00000 0 0x60000>;
1213 interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1214 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1215 <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1216 <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1217 <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1218 <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1219 <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1220 <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1221 <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1222 <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1223 <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1224 <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1225 dma-channels = <12>;
1226 dma-channel-mask = <0xff>;
1227 iommus = <&apps_smmu 0x56 0x0>;
1229 status = "disabled";
1232 qupv3_id_1: geniqup@ac0000 {
1233 compatible = "qcom,geni-se-qup";
1234 reg = <0x0 0x00ac0000 0x0 0x6000>;
1235 clock-names = "m-ahb", "s-ahb";
1236 clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1237 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1238 iommus = <&apps_smmu 0x43 0>;
1239 #address-cells = <2>;
1242 status = "disabled";
1245 compatible = "qcom,geni-i2c";
1246 reg = <0 0x00a80000 0 0x4000>;
1248 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1249 pinctrl-names = "default";
1250 pinctrl-0 = <&qup_i2c8_default>;
1251 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1252 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1253 <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1254 dma-names = "tx", "rx";
1255 #address-cells = <1>;
1257 status = "disabled";
1261 compatible = "qcom,geni-spi";
1262 reg = <0 0x00a80000 0 0x4000>;
1264 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1265 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1266 power-domains = <&rpmhpd SM8350_CX>;
1267 operating-points-v2 = <&qup_opp_table_120mhz>;
1268 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1269 <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1270 dma-names = "tx", "rx";
1271 #address-cells = <1>;
1273 status = "disabled";
1277 compatible = "qcom,geni-i2c";
1278 reg = <0 0x00a84000 0 0x4000>;
1280 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1281 pinctrl-names = "default";
1282 pinctrl-0 = <&qup_i2c9_default>;
1283 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1284 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1285 <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1286 dma-names = "tx", "rx";
1287 #address-cells = <1>;
1289 status = "disabled";
1293 compatible = "qcom,geni-spi";
1294 reg = <0 0x00a84000 0 0x4000>;
1296 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1297 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1298 power-domains = <&rpmhpd SM8350_CX>;
1299 operating-points-v2 = <&qup_opp_table_100mhz>;
1300 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1301 <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1302 dma-names = "tx", "rx";
1303 #address-cells = <1>;
1305 status = "disabled";
1309 compatible = "qcom,geni-i2c";
1310 reg = <0 0x00a88000 0 0x4000>;
1312 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1313 pinctrl-names = "default";
1314 pinctrl-0 = <&qup_i2c10_default>;
1315 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1316 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1317 <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1318 dma-names = "tx", "rx";
1319 #address-cells = <1>;
1321 status = "disabled";
1325 compatible = "qcom,geni-spi";
1326 reg = <0 0x00a88000 0 0x4000>;
1328 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1329 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1330 power-domains = <&rpmhpd SM8350_CX>;
1331 operating-points-v2 = <&qup_opp_table_100mhz>;
1332 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1333 <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1334 dma-names = "tx", "rx";
1335 #address-cells = <1>;
1337 status = "disabled";
1341 compatible = "qcom,geni-i2c";
1342 reg = <0 0x00a8c000 0 0x4000>;
1344 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1345 pinctrl-names = "default";
1346 pinctrl-0 = <&qup_i2c11_default>;
1347 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1348 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1349 <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1350 dma-names = "tx", "rx";
1351 #address-cells = <1>;
1353 status = "disabled";
1357 compatible = "qcom,geni-spi";
1358 reg = <0 0x00a8c000 0 0x4000>;
1360 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1361 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1362 power-domains = <&rpmhpd SM8350_CX>;
1363 operating-points-v2 = <&qup_opp_table_100mhz>;
1364 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1365 <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1366 dma-names = "tx", "rx";
1367 #address-cells = <1>;
1369 status = "disabled";
1373 compatible = "qcom,geni-i2c";
1374 reg = <0 0x00a90000 0 0x4000>;
1376 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1377 pinctrl-names = "default";
1378 pinctrl-0 = <&qup_i2c12_default>;
1379 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1380 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1381 <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1382 dma-names = "tx", "rx";
1383 #address-cells = <1>;
1385 status = "disabled";
1389 compatible = "qcom,geni-spi";
1390 reg = <0 0x00a90000 0 0x4000>;
1392 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1393 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1394 power-domains = <&rpmhpd SM8350_CX>;
1395 operating-points-v2 = <&qup_opp_table_100mhz>;
1396 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1397 <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1398 dma-names = "tx", "rx";
1399 #address-cells = <1>;
1401 status = "disabled";
1405 compatible = "qcom,geni-i2c";
1406 reg = <0 0x00a94000 0 0x4000>;
1408 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1409 pinctrl-names = "default";
1410 pinctrl-0 = <&qup_i2c13_default>;
1411 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1412 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1413 <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1414 dma-names = "tx", "rx";
1415 #address-cells = <1>;
1417 status = "disabled";
1421 compatible = "qcom,geni-spi";
1422 reg = <0 0x00a94000 0 0x4000>;
1424 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1425 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1426 power-domains = <&rpmhpd SM8350_CX>;
1427 operating-points-v2 = <&qup_opp_table_100mhz>;
1428 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1429 <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1430 dma-names = "tx", "rx";
1431 #address-cells = <1>;
1433 status = "disabled";
1437 apps_smmu: iommu@15000000 {
1438 compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
1439 reg = <0 0x15000000 0 0x100000>;
1441 #global-interrupts = <2>;
1442 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
1443 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1444 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1445 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1446 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1447 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1448 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1449 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1450 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1451 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1452 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1453 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1454 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1455 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1456 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1457 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1458 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1459 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1460 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1461 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1462 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1463 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1464 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1465 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1466 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
1467 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
1468 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
1469 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
1470 <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
1471 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
1472 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
1473 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
1474 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
1475 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
1476 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
1477 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
1478 <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
1479 <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
1480 <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
1481 <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
1482 <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
1483 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
1484 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
1485 <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
1486 <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
1487 <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
1488 <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
1489 <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
1490 <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
1491 <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
1492 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1493 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
1494 <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
1495 <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
1496 <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
1497 <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1498 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1499 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1500 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
1501 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
1502 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
1503 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
1504 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
1505 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
1506 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
1507 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
1508 <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
1509 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
1510 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
1511 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
1512 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
1513 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
1514 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
1515 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
1516 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
1517 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
1518 <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
1519 <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
1520 <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
1521 <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
1522 <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
1523 <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
1524 <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
1525 <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
1526 <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
1527 <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
1528 <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
1529 <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
1530 <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
1531 <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
1532 <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
1533 <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
1534 <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
1535 <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
1536 <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
1537 <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
1538 <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
1539 <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
1542 config_noc: interconnect@1500000 {
1543 compatible = "qcom,sm8350-config-noc";
1544 reg = <0 0x01500000 0 0xa580>;
1545 #interconnect-cells = <1>;
1546 qcom,bcm-voters = <&apps_bcm_voter>;
1549 mc_virt: interconnect@1580000 {
1550 compatible = "qcom,sm8350-mc-virt";
1551 reg = <0 0x01580000 0 0x1000>;
1552 #interconnect-cells = <1>;
1553 qcom,bcm-voters = <&apps_bcm_voter>;
1556 system_noc: interconnect@1680000 {
1557 compatible = "qcom,sm8350-system-noc";
1558 reg = <0 0x01680000 0 0x1c200>;
1559 #interconnect-cells = <1>;
1560 qcom,bcm-voters = <&apps_bcm_voter>;
1563 aggre1_noc: interconnect@16e0000 {
1564 compatible = "qcom,sm8350-aggre1-noc";
1565 reg = <0 0x016e0000 0 0x1f180>;
1566 #interconnect-cells = <1>;
1567 qcom,bcm-voters = <&apps_bcm_voter>;
1570 aggre2_noc: interconnect@1700000 {
1571 compatible = "qcom,sm8350-aggre2-noc";
1572 reg = <0 0x01700000 0 0x33000>;
1573 #interconnect-cells = <1>;
1574 qcom,bcm-voters = <&apps_bcm_voter>;
1577 mmss_noc: interconnect@1740000 {
1578 compatible = "qcom,sm8350-mmss-noc";
1579 reg = <0 0x01740000 0 0x1f080>;
1580 #interconnect-cells = <1>;
1581 qcom,bcm-voters = <&apps_bcm_voter>;
1584 lpass_ag_noc: interconnect@3c40000 {
1585 compatible = "qcom,sm8350-lpass-ag-noc";
1586 reg = <0 0x03c40000 0 0xf080>;
1587 #interconnect-cells = <1>;
1588 qcom,bcm-voters = <&apps_bcm_voter>;
1591 compute_noc: interconnect@a0c0000{
1592 compatible = "qcom,sm8350-compute-noc";
1593 reg = <0 0x0a0c0000 0 0xa180>;
1594 #interconnect-cells = <1>;
1595 qcom,bcm-voters = <&apps_bcm_voter>;
1599 compatible = "qcom,sm8350-ipa";
1601 iommus = <&apps_smmu 0x5c0 0x0>,
1602 <&apps_smmu 0x5c2 0x0>;
1603 reg = <0 0x1e40000 0 0x8000>,
1604 <0 0x1e50000 0 0x4b20>,
1605 <0 0x1e04000 0 0x23000>;
1606 reg-names = "ipa-reg",
1610 interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
1611 <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
1612 <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1613 <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
1614 interrupt-names = "ipa",
1619 clocks = <&rpmhcc RPMH_IPA_CLK>;
1620 clock-names = "core";
1622 interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
1623 <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
1624 interconnect-names = "memory",
1627 qcom,qmp = <&aoss_qmp>;
1629 qcom,smem-states = <&ipa_smp2p_out 0>,
1631 qcom,smem-state-names = "ipa-clock-enabled-valid",
1632 "ipa-clock-enabled";
1634 status = "disabled";
1637 tcsr_mutex: hwlock@1f40000 {
1638 compatible = "qcom,tcsr-mutex";
1639 reg = <0x0 0x01f40000 0x0 0x40000>;
1640 #hwlock-cells = <1>;
1643 mpss: remoteproc@4080000 {
1644 compatible = "qcom,sm8350-mpss-pas";
1645 reg = <0x0 0x04080000 0x0 0x4040>;
1647 interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
1648 <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
1649 <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
1650 <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
1651 <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
1652 <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
1653 interrupt-names = "wdog", "fatal", "ready", "handover",
1654 "stop-ack", "shutdown-ack";
1656 clocks = <&rpmhcc RPMH_CXO_CLK>;
1659 power-domains = <&rpmhpd 0>,
1661 power-domain-names = "cx", "mss";
1663 interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
1665 memory-region = <&pil_modem_mem>;
1667 qcom,qmp = <&aoss_qmp>;
1669 qcom,smem-states = <&smp2p_modem_out 0>;
1670 qcom,smem-state-names = "stop";
1672 status = "disabled";
1675 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
1676 IPCC_MPROC_SIGNAL_GLINK_QMP
1677 IRQ_TYPE_EDGE_RISING>;
1678 mboxes = <&ipcc IPCC_CLIENT_MPSS
1679 IPCC_MPROC_SIGNAL_GLINK_QMP>;
1680 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
1682 qcom,remote-pid = <1>;
1686 pdc: interrupt-controller@b220000 {
1687 compatible = "qcom,sm8350-pdc", "qcom,pdc";
1688 reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
1689 qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
1690 <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
1691 <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
1693 #interrupt-cells = <2>;
1694 interrupt-parent = <&intc>;
1695 interrupt-controller;
1698 tsens0: thermal-sensor@c263000 {
1699 compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
1700 reg = <0 0x0c263000 0 0x1ff>, /* TM */
1701 <0 0x0c222000 0 0x8>; /* SROT */
1702 #qcom,sensors = <15>;
1703 interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
1704 <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
1705 interrupt-names = "uplow", "critical";
1706 #thermal-sensor-cells = <1>;
1709 tsens1: thermal-sensor@c265000 {
1710 compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
1711 reg = <0 0x0c265000 0 0x1ff>, /* TM */
1712 <0 0x0c223000 0 0x8>; /* SROT */
1713 #qcom,sensors = <14>;
1714 interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
1715 <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
1716 interrupt-names = "uplow", "critical";
1717 #thermal-sensor-cells = <1>;
1720 aoss_qmp: power-controller@c300000 {
1721 compatible = "qcom,sm8350-aoss-qmp";
1722 reg = <0 0x0c300000 0 0x400>;
1723 interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
1724 IRQ_TYPE_EDGE_RISING>;
1725 mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
1731 compatible = "qcom,rpmh-stats";
1732 reg = <0 0x0c3f0000 0 0x400>;
1735 spmi_bus: spmi@c440000 {
1736 compatible = "qcom,spmi-pmic-arb";
1737 reg = <0x0 0xc440000 0x0 0x1100>,
1738 <0x0 0xc600000 0x0 0x2000000>,
1739 <0x0 0xe600000 0x0 0x100000>,
1740 <0x0 0xe700000 0x0 0xa0000>,
1741 <0x0 0xc40a000 0x0 0x26000>;
1742 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1743 interrupt-names = "periph_irq";
1744 interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
1747 #address-cells = <2>;
1749 interrupt-controller;
1750 #interrupt-cells = <4>;
1753 tlmm: pinctrl@f100000 {
1754 compatible = "qcom,sm8350-tlmm";
1755 reg = <0 0x0f100000 0 0x300000>;
1756 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1759 interrupt-controller;
1760 #interrupt-cells = <2>;
1761 gpio-ranges = <&tlmm 0 0 204>;
1762 wakeup-parent = <&pdc>;
1764 qup_uart3_default_state: qup-uart3-default-state {
1775 qup_uart6_default: qup-uart6-default {
1776 pins = "gpio30", "gpio31";
1778 drive-strength = <2>;
1782 qup_uart18_default: qup-uart18-default {
1783 pins = "gpio58", "gpio59";
1785 drive-strength = <2>;
1789 qup_i2c0_default: qup-i2c0-default {
1790 pins = "gpio4", "gpio5";
1792 drive-strength = <2>;
1796 qup_i2c1_default: qup-i2c1-default {
1797 pins = "gpio8", "gpio9";
1799 drive-strength = <2>;
1803 qup_i2c2_default: qup-i2c2-default {
1804 pins = "gpio12", "gpio13";
1806 drive-strength = <2>;
1810 qup_i2c4_default: qup-i2c4-default {
1811 pins = "gpio20", "gpio21";
1813 drive-strength = <2>;
1817 qup_i2c5_default: qup-i2c5-default {
1818 pins = "gpio24", "gpio25";
1820 drive-strength = <2>;
1824 qup_i2c6_default: qup-i2c6-default {
1825 pins = "gpio28", "gpio29";
1827 drive-strength = <2>;
1831 qup_i2c7_default: qup-i2c7-default {
1832 pins = "gpio32", "gpio33";
1834 drive-strength = <2>;
1838 qup_i2c8_default: qup-i2c8-default {
1839 pins = "gpio36", "gpio37";
1841 drive-strength = <2>;
1845 qup_i2c9_default: qup-i2c9-default {
1846 pins = "gpio40", "gpio41";
1848 drive-strength = <2>;
1852 qup_i2c10_default: qup-i2c10-default {
1853 pins = "gpio44", "gpio45";
1855 drive-strength = <2>;
1859 qup_i2c11_default: qup-i2c11-default {
1860 pins = "gpio48", "gpio49";
1862 drive-strength = <2>;
1866 qup_i2c12_default: qup-i2c12-default {
1867 pins = "gpio52", "gpio53";
1869 drive-strength = <2>;
1873 qup_i2c13_default: qup-i2c13-default {
1874 pins = "gpio0", "gpio1";
1876 drive-strength = <2>;
1880 qup_i2c14_default: qup-i2c14-default {
1881 pins = "gpio56", "gpio57";
1883 drive-strength = <2>;
1887 qup_i2c15_default: qup-i2c15-default {
1888 pins = "gpio60", "gpio61";
1890 drive-strength = <2>;
1894 qup_i2c16_default: qup-i2c16-default {
1895 pins = "gpio64", "gpio65";
1897 drive-strength = <2>;
1901 qup_i2c17_default: qup-i2c17-default {
1902 pins = "gpio72", "gpio73";
1904 drive-strength = <2>;
1908 qup_i2c19_default: qup-i2c19-default {
1909 pins = "gpio76", "gpio77";
1911 drive-strength = <2>;
1917 compatible = "qcom,prng-ee";
1918 reg = <0 0x010d3000 0 0x1000>;
1919 clocks = <&rpmhcc RPMH_HWKM_CLK>;
1920 clock-names = "core";
1923 intc: interrupt-controller@17a00000 {
1924 compatible = "arm,gic-v3";
1925 #interrupt-cells = <3>;
1926 interrupt-controller;
1927 #redistributor-regions = <1>;
1928 redistributor-stride = <0 0x20000>;
1929 reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
1930 <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
1931 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1935 compatible = "arm,armv7-timer-mem";
1936 #address-cells = <2>;
1939 reg = <0x0 0x17c20000 0x0 0x1000>;
1940 clock-frequency = <19200000>;
1944 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1945 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1946 reg = <0x0 0x17c21000 0x0 0x1000>,
1947 <0x0 0x17c22000 0x0 0x1000>;
1952 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1953 reg = <0x0 0x17c23000 0x0 0x1000>;
1954 status = "disabled";
1959 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1960 reg = <0x0 0x17c25000 0x0 0x1000>;
1961 status = "disabled";
1966 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1967 reg = <0x0 0x17c27000 0x0 0x1000>;
1968 status = "disabled";
1973 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1974 reg = <0x0 0x17c29000 0x0 0x1000>;
1975 status = "disabled";
1980 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1981 reg = <0x0 0x17c2b000 0x0 0x1000>;
1982 status = "disabled";
1987 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1988 reg = <0x0 0x17c2d000 0x0 0x1000>;
1989 status = "disabled";
1993 apps_rsc: rsc@18200000 {
1995 compatible = "qcom,rpmh-rsc";
1996 reg = <0x0 0x18200000 0x0 0x10000>,
1997 <0x0 0x18210000 0x0 0x10000>,
1998 <0x0 0x18220000 0x0 0x10000>;
1999 reg-names = "drv-0", "drv-1", "drv-2";
2000 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
2001 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
2002 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
2003 qcom,tcs-offset = <0xd00>;
2005 qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
2006 <WAKE_TCS 3>, <CONTROL_TCS 0>;
2008 rpmhcc: clock-controller {
2009 compatible = "qcom,sm8350-rpmh-clk";
2012 clocks = <&xo_board>;
2015 rpmhpd: power-controller {
2016 compatible = "qcom,sm8350-rpmhpd";
2017 #power-domain-cells = <1>;
2018 operating-points-v2 = <&rpmhpd_opp_table>;
2020 rpmhpd_opp_table: opp-table {
2021 compatible = "operating-points-v2";
2023 rpmhpd_opp_ret: opp1 {
2024 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
2027 rpmhpd_opp_min_svs: opp2 {
2028 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2031 rpmhpd_opp_low_svs: opp3 {
2032 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2035 rpmhpd_opp_svs: opp4 {
2036 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2039 rpmhpd_opp_svs_l1: opp5 {
2040 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2043 rpmhpd_opp_nom: opp6 {
2044 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2047 rpmhpd_opp_nom_l1: opp7 {
2048 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2051 rpmhpd_opp_nom_l2: opp8 {
2052 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
2055 rpmhpd_opp_turbo: opp9 {
2056 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2059 rpmhpd_opp_turbo_l1: opp10 {
2060 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
2065 apps_bcm_voter: bcm-voter {
2066 compatible = "qcom,bcm-voter";
2070 cpufreq_hw: cpufreq@18591000 {
2071 compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
2072 reg = <0 0x18591000 0 0x1000>,
2073 <0 0x18592000 0 0x1000>,
2074 <0 0x18593000 0 0x1000>;
2075 reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
2077 clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
2078 clock-names = "xo", "alternate";
2080 #freq-domain-cells = <1>;
2083 ufs_mem_hc: ufshc@1d84000 {
2084 compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
2086 reg = <0 0x01d84000 0 0x3000>;
2087 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
2088 phys = <&ufs_mem_phy_lanes>;
2089 phy-names = "ufsphy";
2090 lanes-per-direction = <2>;
2092 resets = <&gcc GCC_UFS_PHY_BCR>;
2093 reset-names = "rst";
2095 power-domains = <&gcc UFS_PHY_GDSC>;
2097 iommus = <&apps_smmu 0xe0 0x0>;
2105 "tx_lane0_sync_clk",
2106 "rx_lane0_sync_clk",
2107 "rx_lane1_sync_clk";
2109 <&gcc GCC_UFS_PHY_AXI_CLK>,
2110 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2111 <&gcc GCC_UFS_PHY_AHB_CLK>,
2112 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
2113 <&rpmhcc RPMH_CXO_CLK>,
2114 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
2115 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
2116 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
2118 <75000000 300000000>,
2121 <75000000 300000000>,
2126 status = "disabled";
2129 ufs_mem_phy: phy@1d87000 {
2130 compatible = "qcom,sm8350-qmp-ufs-phy";
2131 reg = <0 0x01d87000 0 0xe10>;
2132 #address-cells = <2>;
2135 clock-names = "ref",
2137 clocks = <&rpmhcc RPMH_CXO_CLK>,
2138 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
2140 resets = <&ufs_mem_hc 0>;
2141 reset-names = "ufsphy";
2142 status = "disabled";
2144 ufs_mem_phy_lanes: phy@1d87400 {
2145 reg = <0 0x01d87400 0 0x108>,
2146 <0 0x01d87600 0 0x1e0>,
2147 <0 0x01d87c00 0 0x1dc>,
2148 <0 0x01d87800 0 0x108>,
2149 <0 0x01d87a00 0 0x1e0>;
2155 slpi: remoteproc@5c00000 {
2156 compatible = "qcom,sm8350-slpi-pas";
2157 reg = <0 0x05c00000 0 0x4000>;
2159 interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
2160 <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2161 <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2162 <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2163 <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2164 interrupt-names = "wdog", "fatal", "ready",
2165 "handover", "stop-ack";
2167 clocks = <&rpmhcc RPMH_CXO_CLK>;
2170 power-domains = <&rpmhpd 4>,
2172 power-domain-names = "lcx", "lmx";
2174 memory-region = <&pil_slpi_mem>;
2176 qcom,qmp = <&aoss_qmp>;
2178 qcom,smem-states = <&smp2p_slpi_out 0>;
2179 qcom,smem-state-names = "stop";
2181 status = "disabled";
2184 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2185 IPCC_MPROC_SIGNAL_GLINK_QMP
2186 IRQ_TYPE_EDGE_RISING>;
2187 mboxes = <&ipcc IPCC_CLIENT_SLPI
2188 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2191 qcom,remote-pid = <3>;
2194 compatible = "qcom,fastrpc";
2195 qcom,glink-channels = "fastrpcglink-apps-dsp";
2197 qcom,non-secure-domain;
2198 #address-cells = <1>;
2202 compatible = "qcom,fastrpc-compute-cb";
2204 iommus = <&apps_smmu 0x0541 0x0>;
2208 compatible = "qcom,fastrpc-compute-cb";
2210 iommus = <&apps_smmu 0x0542 0x0>;
2214 compatible = "qcom,fastrpc-compute-cb";
2216 iommus = <&apps_smmu 0x0543 0x0>;
2217 /* note: shared-cb = <4> in downstream */
2223 cdsp: remoteproc@98900000 {
2224 compatible = "qcom,sm8350-cdsp-pas";
2225 reg = <0 0x098900000 0 0x1400000>;
2227 interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
2228 <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2229 <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2230 <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2231 <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2232 interrupt-names = "wdog", "fatal", "ready",
2233 "handover", "stop-ack";
2235 clocks = <&rpmhcc RPMH_CXO_CLK>;
2238 power-domains = <&rpmhpd 0>,
2240 power-domain-names = "cx", "mxc";
2242 interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
2244 memory-region = <&pil_cdsp_mem>;
2246 qcom,qmp = <&aoss_qmp>;
2248 qcom,smem-states = <&smp2p_cdsp_out 0>;
2249 qcom,smem-state-names = "stop";
2251 status = "disabled";
2254 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2255 IPCC_MPROC_SIGNAL_GLINK_QMP
2256 IRQ_TYPE_EDGE_RISING>;
2257 mboxes = <&ipcc IPCC_CLIENT_CDSP
2258 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2261 qcom,remote-pid = <5>;
2264 compatible = "qcom,fastrpc";
2265 qcom,glink-channels = "fastrpcglink-apps-dsp";
2267 qcom,non-secure-domain;
2268 #address-cells = <1>;
2272 compatible = "qcom,fastrpc-compute-cb";
2274 iommus = <&apps_smmu 0x2161 0x0400>,
2275 <&apps_smmu 0x1181 0x0420>;
2279 compatible = "qcom,fastrpc-compute-cb";
2281 iommus = <&apps_smmu 0x2162 0x0400>,
2282 <&apps_smmu 0x1182 0x0420>;
2286 compatible = "qcom,fastrpc-compute-cb";
2288 iommus = <&apps_smmu 0x2163 0x0400>,
2289 <&apps_smmu 0x1183 0x0420>;
2293 compatible = "qcom,fastrpc-compute-cb";
2295 iommus = <&apps_smmu 0x2164 0x0400>,
2296 <&apps_smmu 0x1184 0x0420>;
2300 compatible = "qcom,fastrpc-compute-cb";
2302 iommus = <&apps_smmu 0x2165 0x0400>,
2303 <&apps_smmu 0x1185 0x0420>;
2307 compatible = "qcom,fastrpc-compute-cb";
2309 iommus = <&apps_smmu 0x2166 0x0400>,
2310 <&apps_smmu 0x1186 0x0420>;
2314 compatible = "qcom,fastrpc-compute-cb";
2316 iommus = <&apps_smmu 0x2167 0x0400>,
2317 <&apps_smmu 0x1187 0x0420>;
2321 compatible = "qcom,fastrpc-compute-cb";
2323 iommus = <&apps_smmu 0x2168 0x0400>,
2324 <&apps_smmu 0x1188 0x0420>;
2327 /* note: secure cb9 in downstream */
2332 usb_1_hsphy: phy@88e3000 {
2333 compatible = "qcom,sm8350-usb-hs-phy",
2334 "qcom,usb-snps-hs-7nm-phy";
2335 reg = <0 0x088e3000 0 0x400>;
2336 status = "disabled";
2339 clocks = <&rpmhcc RPMH_CXO_CLK>;
2340 clock-names = "ref";
2342 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2345 usb_2_hsphy: phy@88e4000 {
2346 compatible = "qcom,sm8250-usb-hs-phy",
2347 "qcom,usb-snps-hs-7nm-phy";
2348 reg = <0 0x088e4000 0 0x400>;
2349 status = "disabled";
2352 clocks = <&rpmhcc RPMH_CXO_CLK>;
2353 clock-names = "ref";
2355 resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2358 usb_1_qmpphy: phy-wrapper@88e9000 {
2359 compatible = "qcom,sm8350-qmp-usb3-phy";
2360 reg = <0 0x088e9000 0 0x200>,
2361 <0 0x088e8000 0 0x20>;
2362 status = "disabled";
2363 #address-cells = <2>;
2367 clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2368 <&rpmhcc RPMH_CXO_CLK>,
2369 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2370 clock-names = "aux", "ref_clk_src", "com_aux";
2372 resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2373 <&gcc GCC_USB3_PHY_PRIM_BCR>;
2374 reset-names = "phy", "common";
2376 usb_1_ssphy: phy@88e9200 {
2377 reg = <0 0x088e9200 0 0x200>,
2378 <0 0x088e9400 0 0x200>,
2379 <0 0x088e9c00 0 0x400>,
2380 <0 0x088e9600 0 0x200>,
2381 <0 0x088e9800 0 0x200>,
2382 <0 0x088e9a00 0 0x100>;
2385 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2386 clock-names = "pipe0";
2387 clock-output-names = "usb3_phy_pipe_clk_src";
2391 usb_2_qmpphy: phy-wrapper@88eb000 {
2392 compatible = "qcom,sm8350-qmp-usb3-uni-phy";
2393 reg = <0 0x088eb000 0 0x200>;
2394 status = "disabled";
2395 #address-cells = <2>;
2399 clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
2400 <&rpmhcc RPMH_CXO_CLK>,
2401 <&gcc GCC_USB3_SEC_CLKREF_EN>,
2402 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
2403 clock-names = "aux", "ref_clk_src", "ref", "com_aux";
2405 resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
2406 <&gcc GCC_USB3_PHY_SEC_BCR>;
2407 reset-names = "phy", "common";
2409 usb_2_ssphy: phy@88ebe00 {
2410 reg = <0 0x088ebe00 0 0x200>,
2411 <0 0x088ec000 0 0x200>,
2412 <0 0x088eb200 0 0x1100>;
2415 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
2416 clock-names = "pipe0";
2417 clock-output-names = "usb3_uni_phy_pipe_clk_src";
2421 dc_noc: interconnect@90c0000 {
2422 compatible = "qcom,sm8350-dc-noc";
2423 reg = <0 0x090c0000 0 0x4200>;
2424 #interconnect-cells = <1>;
2425 qcom,bcm-voters = <&apps_bcm_voter>;
2428 gem_noc: interconnect@9100000 {
2429 compatible = "qcom,sm8350-gem-noc";
2430 reg = <0 0x09100000 0 0xb4000>;
2431 #interconnect-cells = <1>;
2432 qcom,bcm-voters = <&apps_bcm_voter>;
2435 system-cache-controller@9200000 {
2436 compatible = "qcom,sm8350-llcc";
2437 reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
2438 reg-names = "llcc_base", "llcc_broadcast_base";
2441 usb_1: usb@a6f8800 {
2442 compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
2443 reg = <0 0x0a6f8800 0 0x400>;
2444 status = "disabled";
2445 #address-cells = <2>;
2449 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2450 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2451 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2452 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2453 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
2454 clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2457 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2458 <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2459 assigned-clock-rates = <19200000>, <200000000>;
2461 interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
2462 <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
2463 <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
2464 <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
2465 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
2466 "dm_hs_phy_irq", "ss_phy_irq";
2468 power-domains = <&gcc USB30_PRIM_GDSC>;
2470 resets = <&gcc GCC_USB30_PRIM_BCR>;
2472 usb_1_dwc3: usb@a600000 {
2473 compatible = "snps,dwc3";
2474 reg = <0 0x0a600000 0 0xcd00>;
2475 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2476 iommus = <&apps_smmu 0x0 0x0>;
2477 snps,dis_u2_susphy_quirk;
2478 snps,dis_enblslpm_quirk;
2479 phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
2480 phy-names = "usb2-phy", "usb3-phy";
2484 usb_2: usb@a8f8800 {
2485 compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
2486 reg = <0 0x0a8f8800 0 0x400>;
2487 status = "disabled";
2488 #address-cells = <2>;
2492 clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
2493 <&gcc GCC_USB30_SEC_MASTER_CLK>,
2494 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
2495 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2496 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
2497 <&gcc GCC_USB3_SEC_CLKREF_EN>;
2498 clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2501 assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2502 <&gcc GCC_USB30_SEC_MASTER_CLK>;
2503 assigned-clock-rates = <19200000>, <200000000>;
2505 interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
2506 <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
2507 <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
2508 <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
2509 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
2510 "dm_hs_phy_irq", "ss_phy_irq";
2512 power-domains = <&gcc USB30_SEC_GDSC>;
2514 resets = <&gcc GCC_USB30_SEC_BCR>;
2516 usb_2_dwc3: usb@a800000 {
2517 compatible = "snps,dwc3";
2518 reg = <0 0x0a800000 0 0xcd00>;
2519 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
2520 iommus = <&apps_smmu 0x20 0x0>;
2521 snps,dis_u2_susphy_quirk;
2522 snps,dis_enblslpm_quirk;
2523 phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
2524 phy-names = "usb2-phy", "usb3-phy";
2528 adsp: remoteproc@17300000 {
2529 compatible = "qcom,sm8350-adsp-pas";
2530 reg = <0 0x17300000 0 0x100>;
2532 interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
2533 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
2534 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
2535 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
2536 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
2537 interrupt-names = "wdog", "fatal", "ready",
2538 "handover", "stop-ack";
2540 clocks = <&rpmhcc RPMH_CXO_CLK>;
2543 power-domains = <&rpmhpd 4>,
2545 power-domain-names = "lcx", "lmx";
2547 memory-region = <&pil_adsp_mem>;
2549 qcom,qmp = <&aoss_qmp>;
2551 qcom,smem-states = <&smp2p_adsp_out 0>;
2552 qcom,smem-state-names = "stop";
2554 status = "disabled";
2557 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
2558 IPCC_MPROC_SIGNAL_GLINK_QMP
2559 IRQ_TYPE_EDGE_RISING>;
2560 mboxes = <&ipcc IPCC_CLIENT_LPASS
2561 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2564 qcom,remote-pid = <2>;
2567 compatible = "qcom,fastrpc";
2568 qcom,glink-channels = "fastrpcglink-apps-dsp";
2570 qcom,non-secure-domain;
2571 #address-cells = <1>;
2575 compatible = "qcom,fastrpc-compute-cb";
2577 iommus = <&apps_smmu 0x1803 0x0>;
2581 compatible = "qcom,fastrpc-compute-cb";
2583 iommus = <&apps_smmu 0x1804 0x0>;
2587 compatible = "qcom,fastrpc-compute-cb";
2589 iommus = <&apps_smmu 0x1805 0x0>;
2596 thermal_zones: thermal-zones {
2598 polling-delay-passive = <250>;
2599 polling-delay = <1000>;
2601 thermal-sensors = <&tsens0 1>;
2604 cpu0_alert0: trip-point0 {
2605 temperature = <90000>;
2606 hysteresis = <2000>;
2610 cpu0_alert1: trip-point1 {
2611 temperature = <95000>;
2612 hysteresis = <2000>;
2616 cpu0_crit: cpu_crit {
2617 temperature = <110000>;
2618 hysteresis = <1000>;
2625 trip = <&cpu0_alert0>;
2626 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2627 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2628 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2629 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2632 trip = <&cpu0_alert1>;
2633 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2634 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2635 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2636 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2642 polling-delay-passive = <250>;
2643 polling-delay = <1000>;
2645 thermal-sensors = <&tsens0 2>;
2648 cpu1_alert0: trip-point0 {
2649 temperature = <90000>;
2650 hysteresis = <2000>;
2654 cpu1_alert1: trip-point1 {
2655 temperature = <95000>;
2656 hysteresis = <2000>;
2660 cpu1_crit: cpu_crit {
2661 temperature = <110000>;
2662 hysteresis = <1000>;
2669 trip = <&cpu1_alert0>;
2670 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2671 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2672 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2673 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2676 trip = <&cpu1_alert1>;
2677 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2678 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2679 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2680 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2686 polling-delay-passive = <250>;
2687 polling-delay = <1000>;
2689 thermal-sensors = <&tsens0 3>;
2692 cpu2_alert0: trip-point0 {
2693 temperature = <90000>;
2694 hysteresis = <2000>;
2698 cpu2_alert1: trip-point1 {
2699 temperature = <95000>;
2700 hysteresis = <2000>;
2704 cpu2_crit: cpu_crit {
2705 temperature = <110000>;
2706 hysteresis = <1000>;
2713 trip = <&cpu2_alert0>;
2714 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2715 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2716 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2717 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2720 trip = <&cpu2_alert1>;
2721 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2722 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2723 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2724 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2730 polling-delay-passive = <250>;
2731 polling-delay = <1000>;
2733 thermal-sensors = <&tsens0 4>;
2736 cpu3_alert0: trip-point0 {
2737 temperature = <90000>;
2738 hysteresis = <2000>;
2742 cpu3_alert1: trip-point1 {
2743 temperature = <95000>;
2744 hysteresis = <2000>;
2748 cpu3_crit: cpu_crit {
2749 temperature = <110000>;
2750 hysteresis = <1000>;
2757 trip = <&cpu3_alert0>;
2758 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2759 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2760 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2761 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2764 trip = <&cpu3_alert1>;
2765 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2766 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2767 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2768 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2774 polling-delay-passive = <250>;
2775 polling-delay = <1000>;
2777 thermal-sensors = <&tsens0 7>;
2780 cpu4_top_alert0: trip-point0 {
2781 temperature = <90000>;
2782 hysteresis = <2000>;
2786 cpu4_top_alert1: trip-point1 {
2787 temperature = <95000>;
2788 hysteresis = <2000>;
2792 cpu4_top_crit: cpu_crit {
2793 temperature = <110000>;
2794 hysteresis = <1000>;
2801 trip = <&cpu4_top_alert0>;
2802 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2803 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2804 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2805 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2808 trip = <&cpu4_top_alert1>;
2809 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2810 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2811 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2812 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2818 polling-delay-passive = <250>;
2819 polling-delay = <1000>;
2821 thermal-sensors = <&tsens0 8>;
2824 cpu5_top_alert0: trip-point0 {
2825 temperature = <90000>;
2826 hysteresis = <2000>;
2830 cpu5_top_alert1: trip-point1 {
2831 temperature = <95000>;
2832 hysteresis = <2000>;
2836 cpu5_top_crit: cpu_crit {
2837 temperature = <110000>;
2838 hysteresis = <1000>;
2845 trip = <&cpu5_top_alert0>;
2846 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2847 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2848 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2849 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2852 trip = <&cpu5_top_alert1>;
2853 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2854 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2855 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2856 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2862 polling-delay-passive = <250>;
2863 polling-delay = <1000>;
2865 thermal-sensors = <&tsens0 9>;
2868 cpu6_top_alert0: trip-point0 {
2869 temperature = <90000>;
2870 hysteresis = <2000>;
2874 cpu6_top_alert1: trip-point1 {
2875 temperature = <95000>;
2876 hysteresis = <2000>;
2880 cpu6_top_crit: cpu_crit {
2881 temperature = <110000>;
2882 hysteresis = <1000>;
2889 trip = <&cpu6_top_alert0>;
2890 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2891 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2892 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2893 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2896 trip = <&cpu6_top_alert1>;
2897 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2898 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2899 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2900 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2906 polling-delay-passive = <250>;
2907 polling-delay = <1000>;
2909 thermal-sensors = <&tsens0 10>;
2912 cpu7_top_alert0: trip-point0 {
2913 temperature = <90000>;
2914 hysteresis = <2000>;
2918 cpu7_top_alert1: trip-point1 {
2919 temperature = <95000>;
2920 hysteresis = <2000>;
2924 cpu7_top_crit: cpu_crit {
2925 temperature = <110000>;
2926 hysteresis = <1000>;
2933 trip = <&cpu7_top_alert0>;
2934 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2935 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2936 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2937 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2940 trip = <&cpu7_top_alert1>;
2941 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2942 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2943 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2944 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2949 cpu4-bottom-thermal {
2950 polling-delay-passive = <250>;
2951 polling-delay = <1000>;
2953 thermal-sensors = <&tsens0 11>;
2956 cpu4_bottom_alert0: trip-point0 {
2957 temperature = <90000>;
2958 hysteresis = <2000>;
2962 cpu4_bottom_alert1: trip-point1 {
2963 temperature = <95000>;
2964 hysteresis = <2000>;
2968 cpu4_bottom_crit: cpu_crit {
2969 temperature = <110000>;
2970 hysteresis = <1000>;
2977 trip = <&cpu4_bottom_alert0>;
2978 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2979 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2980 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2981 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2984 trip = <&cpu4_bottom_alert1>;
2985 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2986 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2987 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2988 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2993 cpu5-bottom-thermal {
2994 polling-delay-passive = <250>;
2995 polling-delay = <1000>;
2997 thermal-sensors = <&tsens0 12>;
3000 cpu5_bottom_alert0: trip-point0 {
3001 temperature = <90000>;
3002 hysteresis = <2000>;
3006 cpu5_bottom_alert1: trip-point1 {
3007 temperature = <95000>;
3008 hysteresis = <2000>;
3012 cpu5_bottom_crit: cpu_crit {
3013 temperature = <110000>;
3014 hysteresis = <1000>;
3021 trip = <&cpu5_bottom_alert0>;
3022 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3023 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3024 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3025 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3028 trip = <&cpu5_bottom_alert1>;
3029 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3030 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3031 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3032 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3037 cpu6-bottom-thermal {
3038 polling-delay-passive = <250>;
3039 polling-delay = <1000>;
3041 thermal-sensors = <&tsens0 13>;
3044 cpu6_bottom_alert0: trip-point0 {
3045 temperature = <90000>;
3046 hysteresis = <2000>;
3050 cpu6_bottom_alert1: trip-point1 {
3051 temperature = <95000>;
3052 hysteresis = <2000>;
3056 cpu6_bottom_crit: cpu_crit {
3057 temperature = <110000>;
3058 hysteresis = <1000>;
3065 trip = <&cpu6_bottom_alert0>;
3066 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3067 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3068 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3069 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3072 trip = <&cpu6_bottom_alert1>;
3073 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3074 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3075 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3076 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3081 cpu7-bottom-thermal {
3082 polling-delay-passive = <250>;
3083 polling-delay = <1000>;
3085 thermal-sensors = <&tsens0 14>;
3088 cpu7_bottom_alert0: trip-point0 {
3089 temperature = <90000>;
3090 hysteresis = <2000>;
3094 cpu7_bottom_alert1: trip-point1 {
3095 temperature = <95000>;
3096 hysteresis = <2000>;
3100 cpu7_bottom_crit: cpu_crit {
3101 temperature = <110000>;
3102 hysteresis = <1000>;
3109 trip = <&cpu7_bottom_alert0>;
3110 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3111 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3112 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3113 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3116 trip = <&cpu7_bottom_alert1>;
3117 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3118 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3119 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3120 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3126 polling-delay-passive = <250>;
3127 polling-delay = <1000>;
3129 thermal-sensors = <&tsens0 0>;
3132 aoss0_alert0: trip-point0 {
3133 temperature = <90000>;
3134 hysteresis = <2000>;
3141 polling-delay-passive = <250>;
3142 polling-delay = <1000>;
3144 thermal-sensors = <&tsens0 5>;
3147 cluster0_alert0: trip-point0 {
3148 temperature = <90000>;
3149 hysteresis = <2000>;
3152 cluster0_crit: cluster0_crit {
3153 temperature = <110000>;
3154 hysteresis = <2000>;
3161 polling-delay-passive = <250>;
3162 polling-delay = <1000>;
3164 thermal-sensors = <&tsens0 6>;
3167 cluster1_alert0: trip-point0 {
3168 temperature = <90000>;
3169 hysteresis = <2000>;
3172 cluster1_crit: cluster1_crit {
3173 temperature = <110000>;
3174 hysteresis = <2000>;
3181 polling-delay-passive = <250>;
3182 polling-delay = <1000>;
3184 thermal-sensors = <&tsens1 0>;
3187 aoss1_alert0: trip-point0 {
3188 temperature = <90000>;
3189 hysteresis = <2000>;
3196 polling-delay-passive = <250>;
3197 polling-delay = <1000>;
3199 thermal-sensors = <&tsens1 1>;
3202 gpu1_alert0: trip-point0 {
3203 temperature = <90000>;
3204 hysteresis = <1000>;
3210 gpu-bottom-thermal {
3211 polling-delay-passive = <250>;
3212 polling-delay = <1000>;
3214 thermal-sensors = <&tsens1 2>;
3217 gpu2_alert0: trip-point0 {
3218 temperature = <90000>;
3219 hysteresis = <1000>;
3226 polling-delay-passive = <250>;
3227 polling-delay = <1000>;
3229 thermal-sensors = <&tsens1 3>;
3232 nspss1_alert0: trip-point0 {
3233 temperature = <90000>;
3234 hysteresis = <1000>;
3241 polling-delay-passive = <250>;
3242 polling-delay = <1000>;
3244 thermal-sensors = <&tsens1 4>;
3247 nspss2_alert0: trip-point0 {
3248 temperature = <90000>;
3249 hysteresis = <1000>;
3256 polling-delay-passive = <250>;
3257 polling-delay = <1000>;
3259 thermal-sensors = <&tsens1 5>;
3262 nspss3_alert0: trip-point0 {
3263 temperature = <90000>;
3264 hysteresis = <1000>;
3271 polling-delay-passive = <250>;
3272 polling-delay = <1000>;
3274 thermal-sensors = <&tsens1 6>;
3277 video_alert0: trip-point0 {
3278 temperature = <90000>;
3279 hysteresis = <2000>;
3286 polling-delay-passive = <250>;
3287 polling-delay = <1000>;
3289 thermal-sensors = <&tsens1 7>;
3292 mem_alert0: trip-point0 {
3293 temperature = <90000>;
3294 hysteresis = <2000>;
3300 modem1-top-thermal {
3301 polling-delay-passive = <250>;
3302 polling-delay = <1000>;
3304 thermal-sensors = <&tsens1 8>;
3307 modem1_alert0: trip-point0 {
3308 temperature = <90000>;
3309 hysteresis = <2000>;
3315 modem2-top-thermal {
3316 polling-delay-passive = <250>;
3317 polling-delay = <1000>;
3319 thermal-sensors = <&tsens1 9>;
3322 modem2_alert0: trip-point0 {
3323 temperature = <90000>;
3324 hysteresis = <2000>;
3330 modem3-top-thermal {
3331 polling-delay-passive = <250>;
3332 polling-delay = <1000>;
3334 thermal-sensors = <&tsens1 10>;
3337 modem3_alert0: trip-point0 {
3338 temperature = <90000>;
3339 hysteresis = <2000>;
3345 modem4-top-thermal {
3346 polling-delay-passive = <250>;
3347 polling-delay = <1000>;
3349 thermal-sensors = <&tsens1 11>;
3352 modem4_alert0: trip-point0 {
3353 temperature = <90000>;
3354 hysteresis = <2000>;
3360 camera-top-thermal {
3361 polling-delay-passive = <250>;
3362 polling-delay = <1000>;
3364 thermal-sensors = <&tsens1 12>;
3367 camera1_alert0: trip-point0 {
3368 temperature = <90000>;
3369 hysteresis = <2000>;
3375 cam-bottom-thermal {
3376 polling-delay-passive = <250>;
3377 polling-delay = <1000>;
3379 thermal-sensors = <&tsens1 13>;
3382 camera2_alert0: trip-point0 {
3383 temperature = <90000>;
3384 hysteresis = <2000>;
3392 compatible = "arm,armv8-timer";
3393 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
3394 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
3395 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
3396 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;