1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020, Linaro Ltd.
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/sound/qcom,q6afe.h>
11 #include <dt-bindings/sound/qcom,q6asm.h>
12 #include "sm8250.dtsi"
13 #include "pm8150.dtsi"
14 #include "pm8150b.dtsi"
15 #include "pm8150l.dtsi"
18 model = "Qualcomm Technologies, Inc. Robotics RB5";
19 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
20 qcom,msm-id = <455 0x20001>;
21 qcom,board-id = <11 3>;
29 stdout-path = "serial0:115200n8";
32 /* Fixed crystal oscillator dedicated to MCP2518FD */
34 compatible = "fixed-clock";
36 clock-frequency = <40000000>;
39 dc12v: dc12v-regulator {
40 compatible = "regulator-fixed";
41 regulator-name = "DC12V";
42 regulator-min-microvolt = <12000000>;
43 regulator-max-microvolt = <12000000>;
48 compatible = "hdmi-connector";
53 remote-endpoint = <<9611_out>;
59 compatible = "gpio-leds";
62 label = "green:user4";
63 function = LED_FUNCTION_INDICATOR;
64 color = <LED_COLOR_ID_GREEN>;
65 gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
66 linux,default-trigger = "panic-indicator";
67 default-state = "off";
71 label = "yellow:wlan";
72 function = LED_FUNCTION_WLAN;
73 color = <LED_COLOR_ID_YELLOW>;
74 gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
75 linux,default-trigger = "phy0tx";
76 default-state = "off";
81 function = LED_FUNCTION_BLUETOOTH;
82 color = <LED_COLOR_ID_BLUE>;
83 gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
84 linux,default-trigger = "bluetooth-power";
85 default-state = "off";
89 lt9611_1v2: lt9611-vdd12-regulator {
90 compatible = "regulator-fixed";
91 regulator-name = "LT9611_1V2";
93 vin-supply = <&vdc_3v3>;
94 regulator-min-microvolt = <1200000>;
95 regulator-max-microvolt = <1200000>;
98 lt9611_3v3: lt9611-3v3 {
99 compatible = "regulator-fixed";
100 regulator-name = "LT9611_3V3";
102 vin-supply = <&vdc_3v3>;
103 regulator-min-microvolt = <3300000>;
104 regulator-max-microvolt = <3300000>;
111 polling-delay-passive = <0>;
113 thermal-sensors = <&pm8150b_adc_tm 0>;
117 temperature = <125000>;
125 polling-delay-passive = <0>;
127 thermal-sensors = <&pm8150l_adc_tm 1>;
131 temperature = <50000>;
139 polling-delay-passive = <0>;
141 thermal-sensors = <&pm8150l_adc_tm 0>;
145 temperature = <50000>;
153 polling-delay-passive = <0>;
155 thermal-sensors = <&pm8150_adc_tm 1>;
159 temperature = <52000>;
167 polling-delay-passive = <0>;
169 thermal-sensors = <&pm8150_adc_tm 0>;
173 temperature = <50000>;
181 vbat: vbat-regulator {
182 compatible = "regulator-fixed";
183 regulator-name = "VBAT";
184 vin-supply = <&vreg_l11c_3p3>;
185 regulator-min-microvolt = <4200000>;
186 regulator-max-microvolt = <4200000>;
190 vbat_som: vbat-som-regulator {
191 compatible = "regulator-fixed";
192 regulator-name = "VBAT_SOM";
193 vin-supply = <&dc12v>;
194 regulator-min-microvolt = <4200000>;
195 regulator-max-microvolt = <4200000>;
199 vdc_3v3: vdc-3v3-regulator {
200 compatible = "regulator-fixed";
201 regulator-name = "VDC_3V3";
202 vin-supply = <&vreg_l11c_3p3>;
203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvolt = <3300000>;
208 vdc_5v: vdc-5v-regulator {
209 compatible = "regulator-fixed";
210 regulator-name = "VDC_5V";
212 regulator-min-microvolt = <5000000>;
213 regulator-max-microvolt = <5000000>;
215 vin-supply = <&vreg_l11c_3p3>;
218 vph_pwr: vph-pwr-regulator {
219 compatible = "regulator-fixed";
220 regulator-name = "vph_pwr";
221 regulator-min-microvolt = <3700000>;
222 regulator-max-microvolt = <3700000>;
226 vreg_s4a_1p8: vreg-s4a-1p8 {
227 compatible = "regulator-fixed";
228 regulator-name = "vreg_s4a_1p8";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
237 firmware-name = "qcom/sm8250/adsp.mbn";
242 compatible = "qcom,pm8009-1-rpmh-regulators";
245 vdd-s1-supply = <&vph_pwr>;
246 vdd-s2-supply = <&vph_pwr>;
247 vdd-l2-supply = <&vreg_s8c_1p3>;
248 vdd-l5-l6-supply = <&vreg_bob>;
249 vdd-l7-supply = <&vreg_s4a_1p8>;
251 vreg_s2f_0p95: smps2 {
252 regulator-name = "vreg_s2f_0p95";
253 regulator-min-microvolt = <900000>;
254 regulator-max-microvolt = <952000>;
255 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
259 regulator-name = "vreg_l1f_1p1";
260 regulator-min-microvolt = <1104000>;
261 regulator-max-microvolt = <1104000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 regulator-name = "vreg_l2f_1p2";
267 regulator-min-microvolt = <1200000>;
268 regulator-max-microvolt = <1200000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 regulator-name = "vreg_l6f_2p8";
274 regulator-min-microvolt = <2800000>;
275 regulator-max-microvolt = <2800000>;
276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 regulator-name = "vreg_l7f_1p8";
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
288 compatible = "qcom,pm8150-rpmh-regulators";
291 vdd-s1-supply = <&vph_pwr>;
292 vdd-s2-supply = <&vph_pwr>;
293 vdd-s3-supply = <&vph_pwr>;
294 vdd-s4-supply = <&vph_pwr>;
295 vdd-s5-supply = <&vph_pwr>;
296 vdd-s6-supply = <&vph_pwr>;
297 vdd-s7-supply = <&vph_pwr>;
298 vdd-s8-supply = <&vph_pwr>;
299 vdd-s9-supply = <&vph_pwr>;
300 vdd-s10-supply = <&vph_pwr>;
301 vdd-l2-l10-supply = <&vreg_bob>;
302 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
303 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
304 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
305 vdd-l13-l16-l17-supply = <&vreg_bob>;
308 regulator-name = "vreg_l2a_3p1";
309 regulator-min-microvolt = <3072000>;
310 regulator-max-microvolt = <3072000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-name = "vreg_l3a_0p9";
316 regulator-min-microvolt = <928000>;
317 regulator-max-microvolt = <932000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
321 vreg_l5a_0p88: ldo5 {
322 regulator-name = "vreg_l5a_0p88";
323 regulator-min-microvolt = <880000>;
324 regulator-max-microvolt = <880000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 regulator-name = "vreg_l6a_1p2";
330 regulator-min-microvolt = <1200000>;
331 regulator-max-microvolt = <1200000>;
332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-name = "vreg_l7a_1p7";
337 regulator-min-microvolt = <1704000>;
338 regulator-max-microvolt = <1800000>;
339 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 regulator-name = "vreg_l9a_1p2";
344 regulator-min-microvolt = <1200000>;
345 regulator-max-microvolt = <1200000>;
346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 vreg_l10a_1p8: ldo10 {
350 regulator-name = "vreg_l10a_1p8";
351 regulator-min-microvolt = <1800000>;
352 regulator-max-microvolt = <1800000>;
353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
356 vreg_l12a_1p8: ldo12 {
357 regulator-name = "vreg_l12a_1p8";
358 regulator-min-microvolt = <1800000>;
359 regulator-max-microvolt = <1800000>;
360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 vreg_l13a_ts_3p0: ldo13 {
364 regulator-name = "vreg_l13a_ts_3p0";
365 regulator-min-microvolt = <3008000>;
366 regulator-max-microvolt = <3008000>;
367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 vreg_l14a_1p8: ldo14 {
371 regulator-name = "vreg_l14a_1p8";
372 regulator-min-microvolt = <1800000>;
373 regulator-max-microvolt = <1880000>;
374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
377 vreg_l15a_1p8: ldo15 {
378 regulator-name = "vreg_l15a_1p8";
379 regulator-min-microvolt = <1800000>;
380 regulator-max-microvolt = <1800000>;
381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
384 vreg_l16a_2p7: ldo16 {
385 regulator-name = "vreg_l16a_2p7";
386 regulator-min-microvolt = <2704000>;
387 regulator-max-microvolt = <2960000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 vreg_l17a_3p0: ldo17 {
392 regulator-name = "vreg_l17a_3p0";
393 regulator-min-microvolt = <2856000>;
394 regulator-max-microvolt = <3008000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
398 vreg_l18a_0p92: ldo18 {
399 regulator-name = "vreg_l18a_0p92";
400 regulator-min-microvolt = <800000>;
401 regulator-max-microvolt = <912000>;
402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
405 vreg_s5a_1p9: smps5 {
406 regulator-name = "vreg_s5a_1p9";
407 regulator-min-microvolt = <1904000>;
408 regulator-max-microvolt = <2000000>;
409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
412 vreg_s6a_0p95: smps6 {
413 regulator-name = "vreg_s6a_0p95";
414 regulator-min-microvolt = <920000>;
415 regulator-max-microvolt = <1128000>;
416 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
421 compatible = "qcom,pm8150l-rpmh-regulators";
424 vdd-s1-supply = <&vph_pwr>;
425 vdd-s2-supply = <&vph_pwr>;
426 vdd-s3-supply = <&vph_pwr>;
427 vdd-s4-supply = <&vph_pwr>;
428 vdd-s5-supply = <&vph_pwr>;
429 vdd-s6-supply = <&vph_pwr>;
430 vdd-s7-supply = <&vph_pwr>;
431 vdd-s8-supply = <&vph_pwr>;
432 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
433 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
434 vdd-l4-l5-l6-supply = <&vreg_bob>;
435 vdd-l7-l11-supply = <&vreg_bob>;
436 vdd-l9-l10-supply = <&vreg_bob>;
437 vdd-bob-supply = <&vph_pwr>;
440 regulator-name = "vreg_bob";
441 regulator-min-microvolt = <3008000>;
442 regulator-max-microvolt = <4000000>;
443 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
447 regulator-name = "vreg_l1c_1p8";
448 regulator-min-microvolt = <1800000>;
449 regulator-max-microvolt = <1800000>;
450 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
454 regulator-name = "vreg_l2c_1p2";
455 regulator-min-microvolt = <1200000>;
456 regulator-max-microvolt = <1200000>;
457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
461 regulator-name = "vreg_l3c_0p8";
462 regulator-min-microvolt = <800000>;
463 regulator-max-microvolt = <800000>;
464 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
468 regulator-name = "vreg_l4c_1p7";
469 regulator-min-microvolt = <1704000>;
470 regulator-max-microvolt = <2928000>;
471 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
475 regulator-name = "vreg_l5c_1p8";
476 regulator-min-microvolt = <1800000>;
477 regulator-max-microvolt = <2928000>;
478 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
481 vreg_l6c_2p96: ldo6 {
482 regulator-name = "vreg_l6c_2p96";
483 regulator-min-microvolt = <1800000>;
484 regulator-max-microvolt = <2960000>;
485 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
488 vreg_l7c_cam_vcm0_2p85: ldo7 {
489 regulator-name = "vreg_l7c_cam_vcm0_2p85";
490 regulator-min-microvolt = <2856000>;
491 regulator-max-microvolt = <3104000>;
492 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
496 regulator-name = "vreg_l8c_1p8";
497 regulator-min-microvolt = <1800000>;
498 regulator-max-microvolt = <1800000>;
499 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
502 vreg_l9c_2p96: ldo9 {
503 regulator-name = "vreg_l9c_2p96";
504 regulator-min-microvolt = <2704000>;
505 regulator-max-microvolt = <2960000>;
506 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 vreg_l10c_3p0: ldo10 {
510 regulator-name = "vreg_l10c_3p0";
511 regulator-min-microvolt = <3000000>;
512 regulator-max-microvolt = <3000000>;
513 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516 vreg_l11c_3p3: ldo11 {
517 regulator-name = "vreg_l11c_3p3";
518 regulator-min-microvolt = <3296000>;
519 regulator-max-microvolt = <3296000>;
520 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
524 vreg_s8c_1p3: smps8 {
525 regulator-name = "vreg_s8c_1p3";
526 regulator-min-microvolt = <1352000>;
527 regulator-max-microvolt = <1352000>;
528 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
535 firmware-name = "qcom/sm8250/cdsp.mbn";
540 vdda-supply = <&vreg_l9a_1p2>;
550 remote-endpoint = <<9611_a>;
551 data-lanes = <0 1 2 3>;
559 vdds-supply = <&vreg_l5a_0p88>;
570 memory-region = <&gpu_mem>;
571 firmware-name = "qcom/sm8250/a650_zap.mbn";
582 clock-frequency = <400000>;
584 lt9611_codec: hdmi-bridge@2b {
585 compatible = "lontium,lt9611uxc";
587 #sound-dai-cells = <1>;
589 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
591 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
593 vdd-supply = <<9611_1v2>;
594 vcc-supply = <<9611_3v3>;
596 pinctrl-names = "default";
597 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
600 #address-cells = <1>;
607 remote-endpoint = <&dsi0_out>;
616 remote-endpoint = <&dsi1_out>;
624 lt9611_out: endpoint {
625 remote-endpoint = <&hdmi_con>;
648 reg = <ADC5_XO_THERM_100K_PU>;
650 qcom,hw-settle-time = <200>;
654 reg = <ADC5_AMUX_THM2_100K_PU>;
656 qcom,hw-settle-time = <200>;
665 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
667 qcom,hw-settle-time-us = <200>;
672 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
674 qcom,hw-settle-time-us = <200>;
684 vdda-phy-supply = <&vreg_l5a_0p88>;
685 vdda-pll-supply = <&vreg_l9a_1p2>;
694 vdda-phy-supply = <&vreg_l5a_0p88>;
695 vdda-pll-supply = <&vreg_l9a_1p2>;
704 vdda-phy-supply = <&vreg_l5a_0p88>;
705 vdda-pll-supply = <&vreg_l9a_1p2>;
709 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
717 "PM8250_GPIO7", /* Blue LED */
719 "GPIO_9_P", /* Yellow LED */
720 "GPIO_10_P"; /* Green LED */
725 reg = <ADC5_AMUX_THM3_100K_PU>;
727 qcom,hw-settle-time = <200>;
736 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
738 qcom,hw-settle-time-us = <200>;
748 "HAP_BOOST_EN", /* SOM */
749 "SMB_STAT", /* SOM */
752 "SDM_FORCE_USB_BOOT",
760 reg = <ADC5_AMUX_THM2_100K_PU>;
762 qcom,hw-settle-time = <200>;
766 reg = <ADC5_AMUX_THM3_100K_PU>;
768 qcom,hw-settle-time = <200>;
777 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
779 qcom,hw-settle-time-us = <200>;
784 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
786 qcom,hw-settle-time-us = <200>;
796 "PM_GPIO5", /* HDMI RST_N */
797 "PM_GPIO-A", /* PWM */
805 lt9611_rst_pin: lt9611-rst-state {
818 #address-cells = <1>;
823 color = <LED_COLOR_ID_GREEN>;
824 function = LED_FUNCTION_HEARTBEAT;
825 function-enumerator = <3>;
827 linux,default-trigger = "heartbeat";
828 default-state = "on";
833 color = <LED_COLOR_ID_GREEN>;
834 function = LED_FUNCTION_INDICATOR;
835 function-enumerator = <2>;
836 default-state = "on";
841 color = <LED_COLOR_ID_GREEN>;
842 function = LED_FUNCTION_INDICATOR;
843 function-enumerator = <1>;
854 linux,code = <KEY_VOLUMEDOWN>;
871 reg = <PRIMARY_MI2S_RX>;
872 qcom,sd-lines = <0 1 2 3>;
876 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
879 reg = <TERTIARY_MI2S_RX>;
900 pinctrl-names = "default";
901 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
902 vmmc-supply = <&vreg_l9c_2p96>;
903 vqmmc-supply = <&vreg_l6c_2p96>;
904 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
911 compatible = "qcom,qrb5165-rb5-sndcard";
912 pinctrl-0 = <&tert_mi2s_active>;
913 pinctrl-names = "default";
914 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
916 "SpkrLeft IN", "WSA_SPK1 OUT",
917 "SpkrRight IN", "WSA_SPK2 OUT",
918 "VA DMIC0", "vdd-micb",
919 "VA DMIC1", "vdd-micb",
920 "MM_DL1", "MultiMedia1 Playback",
921 "MM_DL2", "MultiMedia2 Playback",
922 "MultiMedia3 Capture", "MM_UL3";
925 link-name = "MultiMedia1";
927 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
932 link-name = "MultiMedia2";
934 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
939 link-name = "MultiMedia3";
941 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
946 link-name = "HDMI Playback";
948 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
952 sound-dai = <&q6routing>;
956 sound-dai = <<9611_codec 0>;
961 link-name = "WSA Playback";
963 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
967 sound-dai = <&q6routing>;
971 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
976 link-name = "VA Capture";
978 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
982 sound-dai = <&q6routing>;
986 sound-dai = <&vamacro 0>;
994 pinctrl-names = "default";
995 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
996 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
999 compatible = "microchip,mcp2518fd";
1002 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1003 spi-max-frequency = <10000000>;
1004 vdd-supply = <&vdc_5v>;
1005 xceiver-supply = <&vdc_5v>;
1012 left_spkr: speaker@0,3 {
1013 compatible = "sdw10217211000";
1015 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1016 #thermal-sensor-cells = <0>;
1017 sound-name-prefix = "SpkrLeft";
1018 #sound-dai-cells = <0>;
1021 right_spkr: speaker@0,4 {
1022 compatible = "sdw10217211000";
1024 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1025 #thermal-sensor-cells = <0>;
1026 sound-name-prefix = "SpkrRight";
1027 #sound-dai-cells = <0>;
1032 gpio-reserved-ranges = <40 4>;
1044 "GPIO-TT", /* GPIO_10 */
1049 "GPIO_15_RGMII_INT",
1054 "HST_WLAN_EN", /* GPIO_20 */
1062 "GPIO_28_CAN_SPI_MISO",
1063 "GPIO_29_CAN_SPI_MOSI",
1064 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
1065 "GPIO_31_CAN_SPI_CS",
1074 "SPI1_MISO", /* GPIO_40 */
1110 "SD_DAT0", /* BOOT_CFG3 */
1111 "SD_UFS_CARD_DET_N",
1114 "PCIE0_CLK_REQ_N", /* GPIO_80 */
1132 "GPIO-AA", /* CSI4_MCLK */
1133 "GPIO-BB", /* CSI5_MCLK */
1134 "GPIO-KK", /* GPIO_100 */
1144 "NC", /* GPIO_110 */
1154 "NC", /* GPIO_120 */
1164 "WSA1_EN", /* GPIO_130 */
1166 "SDM_FORCE_USB_BOOT",
1171 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
1174 "PCM_DO", /* GPIO_140 */
1184 "GPIO-V", /* GPIO_150 */
1194 "I2C4_SDA", /* GPIO_160 */
1201 "SPI2_ACCEL_CS_LS3",
1204 "GPIO-SS", /* GPIO_170 */
1210 "HST_BLE_SNS_UART_TX",
1211 "HST_BLE_SNS_UART_RX",
1215 lt9611_irq_pin: lt9611-irq-state {
1221 sdc2_default_state: sdc2-default-state {
1225 drive-strength = <16>;
1231 drive-strength = <10>;
1237 drive-strength = <10>;
1241 sdc2_card_det_n: sd-card-det-n-state {
1255 vcc-supply = <&vreg_l17a_3p0>;
1256 vcc-max-microamp = <800000>;
1257 vccq-supply = <&vreg_l6a_1p2>;
1258 vccq-max-microamp = <800000>;
1259 vccq2-supply = <&vreg_s4a_1p8>;
1260 vccq2-max-microamp = <800000>;
1266 vdda-phy-supply = <&vreg_l5a_0p88>;
1267 vdda-pll-supply = <&vreg_l9a_1p2>;
1275 dr_mode = "peripheral";
1281 vdda-pll-supply = <&vreg_l5a_0p88>;
1282 vdda33-supply = <&vreg_l2a_3p1>;
1283 vdda18-supply = <&vreg_l12a_1p8>;
1289 vdda-phy-supply = <&vreg_l9a_1p2>;
1290 vdda-pll-supply = <&vreg_l18a_0p92>;
1304 vdda-pll-supply = <&vreg_l5a_0p88>;
1305 vdda33-supply = <&vreg_l2a_3p1>;
1306 vdda18-supply = <&vreg_l12a_1p8>;
1312 vdda-phy-supply = <&vreg_l9a_1p2>;
1313 vdda-pll-supply = <&vreg_l18a_0p92>;
1317 pinctrl-0 = <&dmic01_active>;
1318 pinctrl-names = "default";
1319 vdd-micb-supply = <&vreg_s4a_1p8>;
1320 qcom,dmic-sample-rate = <600000>;
1331 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1333 drive-strength = <6>;
1337 &qup_spi0_data_clk {
1338 drive-strength = <6>;