arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9
  10 / {
  11         model = "Asus Zenfone 2 Laser";
  12         compatible = "asus,z00l", "qcom,msm8916";
  13         chassis-type = "handset";
  14
  15         aliases {
  16                 serial0 = &blsp1_uart2;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0";
  21         };
  22
  23         gpio-keys {
  24                 compatible = "gpio-keys";
  25
  26                 pinctrl-names = "default";
  27                 pinctrl-0 = <&gpio_keys_default>;
  28
  29                 label = "GPIO Buttons";
  30
  31                 volume-up {
  32                         label = "Volume Up";
  33                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_VOLUMEUP>;
  35                         debounce-interval = <15>;
  36                 };
  37
  38                 volume-down {
  39                         label = "Volume Down";
  40                         gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_VOLUMEDOWN>;
  42                         debounce-interval = <15>;
  43                 };
  44         };
  45
  46         reg_sd_vmmc: regulator-sdcard-vmmc {
  47                 compatible = "regulator-fixed";
  48                 regulator-name = "sdcard-vmmc";
  49                 regulator-min-microvolt = <2950000>;
  50                 regulator-max-microvolt = <2950000>;
  51
  52                 gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
  53                 enable-active-high;
  54
  55                 startup-delay-us = <200>;
  56
  57                 pinctrl-names = "default";
  58                 pinctrl-0 = <&sd_vmmc_en_default>;
  59         };
  60
  61         usb_id: usb-id {
  62                 compatible = "linux,extcon-usb-gpio";
  63                 id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&usb_id_default>;
  66         };
  67 };
  68
  69 &blsp_i2c2 {
  70         status = "okay";
  71
  72         magnetometer@c {
  73                 compatible = "asahi-kasei,ak09911";
  74                 reg = <0x0c>;
  75
  76                 vdd-supply = <&pm8916_l8>;
  77                 vid-supply = <&pm8916_l6>;
  78
  79                 reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
  80
  81                 pinctrl-names = "default";
  82                 pinctrl-0 = <&mag_reset_default>;
  83         };
  84
  85         imu@68 {
  86                 compatible = "invensense,mpu6515";
  87                 reg = <0x68>;
  88
  89                 interrupt-parent = <&msmgpio>;
  90                 interrupts = <36 IRQ_TYPE_EDGE_RISING>;
  91
  92                 vdd-supply = <&pm8916_l17>;
  93                 vddio-supply = <&pm8916_l6>;
  94
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&imu_default>;
  97
  98                 mount-matrix = "1",  "0", "0",
  99                                "0", "-1", "0",
 100                                "0",  "0", "1";
 101         };
 102 };
 103
 104 &blsp_i2c5 {
 105         status = "okay";
 106
 107         touchscreen@38 {
 108                 compatible = "edt,edt-ft5306";
 109                 reg = <0x38>;
 110
 111                 interrupt-parent = <&msmgpio>;
 112                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
 113
 114                 reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
 115
 116                 vcc-supply = <&pm8916_l11>;
 117                 iovcc-supply = <&pm8916_l6>;
 118
 119                 touchscreen-size-x = <720>;
 120                 touchscreen-size-y = <1280>;
 121
 122                 pinctrl-names = "default";
 123                 pinctrl-0 = <&touchscreen_default>;
 124         };
 125 };
 126
 127 &blsp1_uart2 {
 128         status = "okay";
 129 };
 130
 131 &pronto {
 132         status = "okay";
 133 };
 134
 135 &sdhc_1 {
 136         status = "okay";
 137
 138         pinctrl-names = "default", "sleep";
 139         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 140         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 141 };
 142
 143 &sdhc_2 {
 144         status = "okay";
 145         vmmc-supply = <&reg_sd_vmmc>;
 146
 147         pinctrl-names = "default", "sleep";
 148         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 149         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 150         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 151 };
 152
 153 &usb {
 154         status = "okay";
 155         extcon = <&usb_id>, <&usb_id>;
 156 };
 157
 158 &usb_hs_phy {
 159         extcon = <&usb_id>;
 160 };
 161
 162 &smd_rpm_regulators {
 163         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 164         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 165         vdd_l7-supply = <&pm8916_s4>;
 166
 167         s3 {
 168                 regulator-min-microvolt = <1200000>;
 169                 regulator-max-microvolt = <1300000>;
 170         };
 171
 172         s4 {
 173                 regulator-min-microvolt = <1800000>;
 174                 regulator-max-microvolt = <2100000>;
 175         };
 176
 177         l1 {
 178                 regulator-min-microvolt = <1225000>;
 179                 regulator-max-microvolt = <1225000>;
 180         };
 181
 182         l2 {
 183                 regulator-min-microvolt = <1200000>;
 184                 regulator-max-microvolt = <1200000>;
 185         };
 186
 187         l4 {
 188                 regulator-min-microvolt = <2050000>;
 189                 regulator-max-microvolt = <2050000>;
 190         };
 191
 192         l5 {
 193                 regulator-min-microvolt = <1800000>;
 194                 regulator-max-microvolt = <1800000>;
 195         };
 196
 197         l6 {
 198                 regulator-min-microvolt = <1800000>;
 199                 regulator-max-microvolt = <1800000>;
 200         };
 201
 202         l7 {
 203                 regulator-min-microvolt = <1800000>;
 204                 regulator-max-microvolt = <1800000>;
 205         };
 206
 207         l8 {
 208                 regulator-min-microvolt = <2850000>;
 209                 regulator-max-microvolt = <2900000>;
 210         };
 211
 212         l9 {
 213                 regulator-min-microvolt = <3300000>;
 214                 regulator-max-microvolt = <3300000>;
 215         };
 216
 217         l10 {
 218                 regulator-min-microvolt = <2700000>;
 219                 regulator-max-microvolt = <2800000>;
 220         };
 221
 222         l11 {
 223                 regulator-min-microvolt = <1800000>;
 224                 regulator-max-microvolt = <2950000>;
 225                 regulator-allow-set-load;
 226                 regulator-system-load = <200000>;
 227         };
 228
 229         l12 {
 230                 regulator-min-microvolt = <1800000>;
 231                 regulator-max-microvolt = <2950000>;
 232         };
 233
 234         l13 {
 235                 regulator-min-microvolt = <3075000>;
 236                 regulator-max-microvolt = <3075000>;
 237         };
 238
 239         l14 {
 240                 regulator-min-microvolt = <1800000>;
 241                 regulator-max-microvolt = <3300000>;
 242         };
 243
 244         l15 {
 245                 regulator-min-microvolt = <1800000>;
 246                 regulator-max-microvolt = <3300000>;
 247         };
 248
 249         l16 {
 250                 regulator-min-microvolt = <1800000>;
 251                 regulator-max-microvolt = <3300000>;
 252         };
 253
 254         l17 {
 255                 regulator-min-microvolt = <2850000>;
 256                 regulator-max-microvolt = <2850000>;
 257         };
 258
 259         l18 {
 260                 regulator-min-microvolt = <2700000>;
 261                 regulator-max-microvolt = <2700000>;
 262         };
 263 };
 264
 265 &msmgpio {
 266         gpio_keys_default: gpio-keys-default {
 267                 pins = "gpio107", "gpio117";
 268                 function = "gpio";
 269
 270                 drive-strength = <2>;
 271                 bias-pull-up;
 272         };
 273
 274         imu_default: imu-default {
 275                 pins = "gpio36";
 276                 function = "gpio";
 277
 278                 drive-strength = <2>;
 279                 bias-disable;
 280         };
 281
 282         mag_reset_default: mag-reset-default {
 283                 pins = "gpio112";
 284                 function = "gpio";
 285
 286                 drive-strength = <2>;
 287                 bias-disable;
 288         };
 289
 290         sd_vmmc_en_default: sd-vmmc-en-default {
 291                 pins = "gpio87";
 292                 function = "gpio";
 293
 294                 drive-strength = <2>;
 295                 bias-disable;
 296         };
 297
 298         touchscreen_default: touchscreen-default {
 299                 pins = "gpio13";
 300                 function = "gpio";
 301
 302                 drive-strength = <2>;
 303                 bias-pull-up;
 304
 305                 reset {
 306                         pins = "gpio12";
 307                         function = "gpio";
 308
 309                         drive-strength = <2>;
 310                         bias-disable;
 311                 };
 312         };
 313
 314         usb_id_default: usb-id-default {
 315                 pins = "gpio110";
 316                 function = "gpio";
 317
 318                 drive-strength = <8>;
 319                 bias-pull-up;
 320         };
 321 };