arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for NXP Layerscape-1046A family SoC.
   4  *
   5  * Copyright 2016 Freescale Semiconductor, Inc.
   6  * Copyright 2018, 2020 NXP
   7  *
   8  * Mingkai Hu <mingkai.hu@nxp.com>
   9  */
  10
  11 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/thermal/thermal.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15
  16 / {
  17         compatible = "fsl,ls1046a";
  18         interrupt-parent = <&gic>;
  19         #address-cells = <2>;
  20         #size-cells = <2>;
  21
  22         aliases {
  23                 crypto = &crypto;
  24                 fman0 = &fman0;
  25                 ethernet0 = &enet0;
  26                 ethernet1 = &enet1;
  27                 ethernet2 = &enet2;
  28                 ethernet3 = &enet3;
  29                 ethernet4 = &enet4;
  30                 ethernet5 = &enet5;
  31                 ethernet6 = &enet6;
  32                 ethernet7 = &enet7;
  33                 rtc1 = &ftm_alarm0;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu0: cpu@0 {
  41                         device_type = "cpu";
  42                         compatible = "arm,cortex-a72";
  43                         reg = <0x0>;
  44                         clocks = <&clockgen QORIQ_CLK_CMUX 0>;
  45                         next-level-cache = <&l2>;
  46                         cpu-idle-states = <&CPU_PH20>;
  47                         #cooling-cells = <2>;
  48                 };
  49
  50                 cpu1: cpu@1 {
  51                         device_type = "cpu";
  52                         compatible = "arm,cortex-a72";
  53                         reg = <0x1>;
  54                         clocks = <&clockgen QORIQ_CLK_CMUX 0>;
  55                         next-level-cache = <&l2>;
  56                         cpu-idle-states = <&CPU_PH20>;
  57                         #cooling-cells = <2>;
  58                 };
  59
  60                 cpu2: cpu@2 {
  61                         device_type = "cpu";
  62                         compatible = "arm,cortex-a72";
  63                         reg = <0x2>;
  64                         clocks = <&clockgen QORIQ_CLK_CMUX 0>;
  65                         next-level-cache = <&l2>;
  66                         cpu-idle-states = <&CPU_PH20>;
  67                         #cooling-cells = <2>;
  68                 };
  69
  70                 cpu3: cpu@3 {
  71                         device_type = "cpu";
  72                         compatible = "arm,cortex-a72";
  73                         reg = <0x3>;
  74                         clocks = <&clockgen QORIQ_CLK_CMUX 0>;
  75                         next-level-cache = <&l2>;
  76                         cpu-idle-states = <&CPU_PH20>;
  77                         #cooling-cells = <2>;
  78                 };
  79
  80                 l2: l2-cache {
  81                         compatible = "cache";
  82                         cache-level = <2>;
  83                         cache-unified;
  84                 };
  85         };
  86
  87         idle-states {
  88                 /*
  89                  * PSCI node is not added default, U-boot will add missing
  90                  * parts if it determines to use PSCI.
  91                  */
  92                 entry-method = "psci";
  93
  94                 CPU_PH20: cpu-ph20 {
  95                         compatible = "arm,idle-state";
  96                         idle-state-name = "PH20";
  97                         arm,psci-suspend-param = <0x0>;
  98                         entry-latency-us = <1000>;
  99                         exit-latency-us = <1000>;
 100                         min-residency-us = <3000>;
 101                 };
 102         };
 103
 104         memory@80000000 {
 105                 device_type = "memory";
 106                 /* Real size will be filled by bootloader */
 107                 reg = <0x0 0x80000000 0x0 0x0>;
 108         };
 109
 110         sysclk: sysclk {
 111                 compatible = "fixed-clock";
 112                 #clock-cells = <0>;
 113                 clock-frequency = <100000000>;
 114                 clock-output-names = "sysclk";
 115         };
 116
 117         reboot {
 118                 compatible = "syscon-reboot";
 119                 regmap = <&dcfg>;
 120                 offset = <0xb0>;
 121                 mask = <0x02>;
 122         };
 123
 124         thermal-zones {
 125                 ddr-controller {
 126                         polling-delay-passive = <1000>;
 127                         polling-delay = <5000>;
 128                         thermal-sensors = <&tmu 0>;
 129
 130                         trips {
 131                                 ddr-ctrler-alert {
 132                                         temperature = <85000>;
 133                                         hysteresis = <2000>;
 134                                         type = "passive";
 135                                 };
 136
 137                                 ddr-ctrler-crit {
 138                                         temperature = <95000>;
 139                                         hysteresis = <2000>;
 140                                         type = "critical";
 141                                 };
 142                         };
 143                 };
 144
 145                 serdes {
 146                         polling-delay-passive = <1000>;
 147                         polling-delay = <5000>;
 148                         thermal-sensors = <&tmu 1>;
 149
 150                         trips {
 151                                 serdes-alert {
 152                                         temperature = <85000>;
 153                                         hysteresis = <2000>;
 154                                         type = "passive";
 155                                 };
 156
 157                                 serdes-crit {
 158                                         temperature = <95000>;
 159                                         hysteresis = <2000>;
 160                                         type = "critical";
 161                                 };
 162                         };
 163                 };
 164
 165                 fman {
 166                         polling-delay-passive = <1000>;
 167                         polling-delay = <5000>;
 168                         thermal-sensors = <&tmu 2>;
 169
 170                         trips {
 171                                 fman-alert {
 172                                         temperature = <85000>;
 173                                         hysteresis = <2000>;
 174                                         type = "passive";
 175                                 };
 176
 177                                 fman-crit {
 178                                         temperature = <95000>;
 179                                         hysteresis = <2000>;
 180                                         type = "critical";
 181                                 };
 182                         };
 183                 };
 184
 185                 core-cluster {
 186                         polling-delay-passive = <1000>;
 187                         polling-delay = <5000>;
 188                         thermal-sensors = <&tmu 3>;
 189
 190                         trips {
 191                                 core_cluster_alert: core-cluster-alert {
 192                                         temperature = <85000>;
 193                                         hysteresis = <2000>;
 194                                         type = "passive";
 195                                 };
 196
 197                                 core_cluster_crit: core-cluster-crit {
 198                                         temperature = <95000>;
 199                                         hysteresis = <2000>;
 200                                         type = "critical";
 201                                 };
 202                         };
 203
 204                         cooling-maps {
 205                                 map0 {
 206                                         trip = <&core_cluster_alert>;
 207                                         cooling-device =
 208                                                 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 209                                                 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 210                                                 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 211                                                 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 212                                 };
 213                         };
 214                 };
 215
 216                 sec {
 217                         polling-delay-passive = <1000>;
 218                         polling-delay = <5000>;
 219                         thermal-sensors = <&tmu 4>;
 220
 221                         trips {
 222                                 sec-alert {
 223                                         temperature = <85000>;
 224                                         hysteresis = <2000>;
 225                                         type = "passive";
 226                                 };
 227
 228                                 sec-crit {
 229                                         temperature = <95000>;
 230                                         hysteresis = <2000>;
 231                                         type = "critical";
 232                                 };
 233                         };
 234                 };
 235         };
 236
 237         timer {
 238                 compatible = "arm,armv8-timer";
 239                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
 240                                           IRQ_TYPE_LEVEL_LOW)>,
 241                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
 242                                           IRQ_TYPE_LEVEL_LOW)>,
 243                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
 244                                           IRQ_TYPE_LEVEL_LOW)>,
 245                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
 246                                           IRQ_TYPE_LEVEL_LOW)>;
 247         };
 248
 249         pmu {
 250                 compatible = "arm,cortex-a72-pmu";
 251                 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 252                              <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
 253                              <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 254                              <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 255                 interrupt-affinity = <&cpu0>,
 256                                      <&cpu1>,
 257                                      <&cpu2>,
 258                                      <&cpu3>;
 259         };
 260
 261         gic: interrupt-controller@1400000 {
 262                 compatible = "arm,gic-400";
 263                 #interrupt-cells = <3>;
 264                 interrupt-controller;
 265                 reg = <0x0 0x1410000 0 0x10000>, /* GICD */
 266                       <0x0 0x1420000 0 0x20000>, /* GICC */
 267                       <0x0 0x1440000 0 0x20000>, /* GICH */
 268                       <0x0 0x1460000 0 0x20000>; /* GICV */
 269                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
 270                                          IRQ_TYPE_LEVEL_LOW)>;
 271         };
 272
 273         soc: soc {
 274                 compatible = "simple-bus";
 275                 #address-cells = <2>;
 276                 #size-cells = <2>;
 277                 ranges;
 278                 dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
 279                 dma-coherent;
 280
 281                 ddr: memory-controller@1080000 {
 282                         compatible = "fsl,qoriq-memory-controller";
 283                         reg = <0x0 0x1080000 0x0 0x1000>;
 284                         interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 285                         big-endian;
 286                 };
 287
 288                 ifc: memory-controller@1530000 {
 289                         compatible = "fsl,ifc";
 290                         reg = <0x0 0x1530000 0x0 0x10000>;
 291                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 292                         status = "disabled";
 293                 };
 294
 295                 qspi: spi@1550000 {
 296                         compatible = "fsl,ls1021a-qspi";
 297                         #address-cells = <1>;
 298                         #size-cells = <0>;
 299                         reg = <0x0 0x1550000 0x0 0x10000>,
 300                                 <0x0 0x40000000 0x0 0x10000000>;
 301                         reg-names = "QuadSPI", "QuadSPI-memory";
 302                         interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 303                         clock-names = "qspi_en", "qspi";
 304                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 305                                             QORIQ_CLK_PLL_DIV(2)>,
 306                                  <&clockgen QORIQ_CLK_PLATFORM_PLL
 307                                             QORIQ_CLK_PLL_DIV(2)>;
 308                         status = "disabled";
 309                 };
 310
 311                 esdhc: esdhc@1560000 {
 312                         compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 313                         reg = <0x0 0x1560000 0x0 0x10000>;
 314                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 315                         clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 316                         voltage-ranges = <1800 1800 3300 3300>;
 317                         sdhci,auto-cmd12;
 318                         big-endian;
 319                         bus-width = <4>;
 320                 };
 321
 322                 scfg: scfg@1570000 {
 323                         compatible = "fsl,ls1046a-scfg", "syscon";
 324                         reg = <0x0 0x1570000 0x0 0x10000>;
 325                         big-endian;
 326                         #address-cells = <1>;
 327                         #size-cells = <1>;
 328                         ranges = <0x0 0x0 0x1570000 0x10000>;
 329
 330                         extirq: interrupt-controller@1ac {
 331                                 compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
 332                                 #interrupt-cells = <2>;
 333                                 #address-cells = <0>;
 334                                 interrupt-controller;
 335                                 reg = <0x1ac 4>;
 336                                 interrupt-map =
 337                                         <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 338                                         <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 339                                         <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 340                                         <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 341                                         <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 342                                         <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 343                                         <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 344                                         <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 345                                         <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 346                                         <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 347                                         <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 348                                         <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 349                                 interrupt-map-mask = <0xf 0x0>;
 350                         };
 351                 };
 352
 353                 crypto: crypto@1700000 {
 354                         compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
 355                                      "fsl,sec-v4.0";
 356                         fsl,sec-era = <8>;
 357                         #address-cells = <1>;
 358                         #size-cells = <1>;
 359                         ranges = <0x0 0x00 0x1700000 0x100000>;
 360                         reg = <0x00 0x1700000 0x0 0x100000>;
 361                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 362
 363                         sec_jr0: jr@10000 {
 364                                 compatible = "fsl,sec-v5.4-job-ring",
 365                                              "fsl,sec-v5.0-job-ring",
 366                                              "fsl,sec-v4.0-job-ring";
 367                                 reg = <0x10000 0x10000>;
 368                                 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 369                         };
 370
 371                         sec_jr1: jr@20000 {
 372                                 compatible = "fsl,sec-v5.4-job-ring",
 373                                              "fsl,sec-v5.0-job-ring",
 374                                              "fsl,sec-v4.0-job-ring";
 375                                 reg = <0x20000 0x10000>;
 376                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 377                         };
 378
 379                         sec_jr2: jr@30000 {
 380                                 compatible = "fsl,sec-v5.4-job-ring",
 381                                              "fsl,sec-v5.0-job-ring",
 382                                              "fsl,sec-v4.0-job-ring";
 383                                 reg = <0x30000 0x10000>;
 384                                 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 385                         };
 386
 387                         sec_jr3: jr@40000 {
 388                                 compatible = "fsl,sec-v5.4-job-ring",
 389                                              "fsl,sec-v5.0-job-ring",
 390                                              "fsl,sec-v4.0-job-ring";
 391                                 reg = <0x40000 0x10000>;
 392                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 393                         };
 394                 };
 395
 396                 qman: qman@1880000 {
 397                         compatible = "fsl,qman";
 398                         reg = <0x0 0x1880000 0x0 0x10000>;
 399                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 400                         memory-region = <&qman_fqd &qman_pfdr>;
 401
 402                 };
 403
 404                 bman: bman@1890000 {
 405                         compatible = "fsl,bman";
 406                         reg = <0x0 0x1890000 0x0 0x10000>;
 407                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 408                         memory-region = <&bman_fbpr>;
 409
 410                 };
 411
 412                 qportals: qman-portals@500000000 {
 413                         ranges = <0x0 0x5 0x00000000 0x8000000>;
 414                 };
 415
 416                 bportals: bman-portals@508000000 {
 417                         ranges = <0x0 0x5 0x08000000 0x8000000>;
 418                 };
 419
 420                 sfp: efuse@1e80000 {
 421                         compatible = "fsl,ls1021a-sfp";
 422                         reg = <0x0 0x1e80000 0x0 0x10000>;
 423                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 424                                             QORIQ_CLK_PLL_DIV(4)>;
 425                         clock-names = "sfp";
 426                 };
 427
 428                 dcfg: dcfg@1ee0000 {
 429                         compatible = "fsl,ls1046a-dcfg", "syscon";
 430                         reg = <0x0 0x1ee0000 0x0 0x1000>;
 431                         big-endian;
 432                 };
 433
 434                 clockgen: clocking@1ee1000 {
 435                         compatible = "fsl,ls1046a-clockgen";
 436                         reg = <0x0 0x1ee1000 0x0 0x1000>;
 437                         #clock-cells = <2>;
 438                         clocks = <&sysclk>;
 439                 };
 440
 441                 tmu: tmu@1f00000 {
 442                         compatible = "fsl,qoriq-tmu";
 443                         reg = <0x0 0x1f00000 0x0 0x10000>;
 444                         interrupts = <0 33 0x4>;
 445                         fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 446                         fsl,tmu-calibration =
 447                                 /* Calibration data group 1 */
 448                                 <0x00000000 0x00000023>,
 449                                 <0x00000001 0x00000029>,
 450                                 <0x00000002 0x0000002f>,
 451                                 <0x00000003 0x00000036>,
 452                                 <0x00000004 0x0000003c>,
 453                                 <0x00000005 0x00000042>,
 454                                 <0x00000006 0x00000049>,
 455                                 <0x00000007 0x0000004f>,
 456                                 <0x00000008 0x00000055>,
 457                                 <0x00000009 0x0000005c>,
 458                                 <0x0000000a 0x00000062>,
 459                                 <0x0000000b 0x00000068>,
 460                                 /* Calibration data group 2 */
 461                                 <0x00010000 0x00000022>,
 462                                 <0x00010001 0x0000002a>,
 463                                 <0x00010002 0x00000032>,
 464                                 <0x00010003 0x0000003a>,
 465                                 <0x00010004 0x00000042>,
 466                                 <0x00010005 0x0000004a>,
 467                                 <0x00010006 0x00000052>,
 468                                 <0x00010007 0x0000005a>,
 469                                 <0x00010008 0x00000062>,
 470                                 <0x00010009 0x0000006a>,
 471                                 /* Calibration data group 3 */
 472                                 <0x00020000 0x00000021>,
 473                                 <0x00020001 0x0000002b>,
 474                                 <0x00020002 0x00000035>,
 475                                 <0x00020003 0x0000003e>,
 476                                 <0x00020004 0x00000048>,
 477                                 <0x00020005 0x00000052>,
 478                                 <0x00020006 0x0000005c>,
 479                                 /* Calibration data group 4 */
 480                                 <0x00030000 0x00000011>,
 481                                 <0x00030001 0x0000001a>,
 482                                 <0x00030002 0x00000024>,
 483                                 <0x00030003 0x0000002e>,
 484                                 <0x00030004 0x00000038>,
 485                                 <0x00030005 0x00000042>,
 486                                 <0x00030006 0x0000004c>,
 487                                 <0x00030007 0x00000056>;
 488                         big-endian;
 489                         #thermal-sensor-cells = <1>;
 490                 };
 491
 492                 dspi: spi@2100000 {
 493                         compatible = "fsl,ls1021a-v1.0-dspi";
 494                         #address-cells = <1>;
 495                         #size-cells = <0>;
 496                         reg = <0x0 0x2100000 0x0 0x10000>;
 497                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 498                         clock-names = "dspi";
 499                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 500                                             QORIQ_CLK_PLL_DIV(2)>;
 501                         spi-num-chipselects = <5>;
 502                         big-endian;
 503                         status = "disabled";
 504                 };
 505
 506                 i2c0: i2c@2180000 {
 507                         compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 508                         #address-cells = <1>;
 509                         #size-cells = <0>;
 510                         reg = <0x0 0x2180000 0x0 0x10000>;
 511                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 512                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 513                                             QORIQ_CLK_PLL_DIV(2)>;
 514                         dmas = <&edma0 1 38>,
 515                                <&edma0 1 39>;
 516                         dma-names = "rx", "tx";
 517                         status = "disabled";
 518                 };
 519
 520                 i2c1: i2c@2190000 {
 521                         compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 522                         #address-cells = <1>;
 523                         #size-cells = <0>;
 524                         reg = <0x0 0x2190000 0x0 0x10000>;
 525                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 526                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 527                                             QORIQ_CLK_PLL_DIV(2)>;
 528                         scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 529                         status = "disabled";
 530                 };
 531
 532                 i2c2: i2c@21a0000 {
 533                         compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 534                         #address-cells = <1>;
 535                         #size-cells = <0>;
 536                         reg = <0x0 0x21a0000 0x0 0x10000>;
 537                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 538                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 539                                             QORIQ_CLK_PLL_DIV(2)>;
 540                         scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 541                         status = "disabled";
 542                 };
 543
 544                 i2c3: i2c@21b0000 {
 545                         compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 546                         #address-cells = <1>;
 547                         #size-cells = <0>;
 548                         reg = <0x0 0x21b0000 0x0 0x10000>;
 549                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 550                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 551                                             QORIQ_CLK_PLL_DIV(2)>;
 552                         scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 553                         status = "disabled";
 554                 };
 555
 556                 duart0: serial@21c0500 {
 557                         compatible = "fsl,ns16550", "ns16550a";
 558                         reg = <0x00 0x21c0500 0x0 0x100>;
 559                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 560                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 561                                             QORIQ_CLK_PLL_DIV(2)>;
 562                         status = "disabled";
 563                 };
 564
 565                 duart1: serial@21c0600 {
 566                         compatible = "fsl,ns16550", "ns16550a";
 567                         reg = <0x00 0x21c0600 0x0 0x100>;
 568                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 569                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 570                                             QORIQ_CLK_PLL_DIV(2)>;
 571                         status = "disabled";
 572                 };
 573
 574                 duart2: serial@21d0500 {
 575                         compatible = "fsl,ns16550", "ns16550a";
 576                         reg = <0x0 0x21d0500 0x0 0x100>;
 577                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 578                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 579                                             QORIQ_CLK_PLL_DIV(2)>;
 580                         status = "disabled";
 581                 };
 582
 583                 duart3: serial@21d0600 {
 584                         compatible = "fsl,ns16550", "ns16550a";
 585                         reg = <0x0 0x21d0600 0x0 0x100>;
 586                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 587                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 588                                             QORIQ_CLK_PLL_DIV(2)>;
 589                         status = "disabled";
 590                 };
 591
 592                 gpio0: gpio@2300000 {
 593                         compatible = "fsl,qoriq-gpio";
 594                         reg = <0x0 0x2300000 0x0 0x10000>;
 595                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 596                         gpio-controller;
 597                         #gpio-cells = <2>;
 598                         interrupt-controller;
 599                         #interrupt-cells = <2>;
 600                 };
 601
 602                 gpio1: gpio@2310000 {
 603                         compatible = "fsl,qoriq-gpio";
 604                         reg = <0x0 0x2310000 0x0 0x10000>;
 605                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 606                         gpio-controller;
 607                         #gpio-cells = <2>;
 608                         interrupt-controller;
 609                         #interrupt-cells = <2>;
 610                 };
 611
 612                 gpio2: gpio@2320000 {
 613                         compatible = "fsl,qoriq-gpio";
 614                         reg = <0x0 0x2320000 0x0 0x10000>;
 615                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 616                         gpio-controller;
 617                         #gpio-cells = <2>;
 618                         interrupt-controller;
 619                         #interrupt-cells = <2>;
 620                 };
 621
 622                 gpio3: gpio@2330000 {
 623                         compatible = "fsl,qoriq-gpio";
 624                         reg = <0x0 0x2330000 0x0 0x10000>;
 625                         interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 626                         gpio-controller;
 627                         #gpio-cells = <2>;
 628                         interrupt-controller;
 629                         #interrupt-cells = <2>;
 630                 };
 631
 632                 lpuart0: serial@2950000 {
 633                         compatible = "fsl,ls1021a-lpuart";
 634                         reg = <0x0 0x2950000 0x0 0x1000>;
 635                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 636                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 637                                             QORIQ_CLK_PLL_DIV(1)>;
 638                         clock-names = "ipg";
 639                         status = "disabled";
 640                 };
 641
 642                 lpuart1: serial@2960000 {
 643                         compatible = "fsl,ls1021a-lpuart";
 644                         reg = <0x0 0x2960000 0x0 0x1000>;
 645                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 646                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 647                                             QORIQ_CLK_PLL_DIV(2)>;
 648                         clock-names = "ipg";
 649                         status = "disabled";
 650                 };
 651
 652                 lpuart2: serial@2970000 {
 653                         compatible = "fsl,ls1021a-lpuart";
 654                         reg = <0x0 0x2970000 0x0 0x1000>;
 655                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 656                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 657                                             QORIQ_CLK_PLL_DIV(2)>;
 658                         clock-names = "ipg";
 659                         status = "disabled";
 660                 };
 661
 662                 lpuart3: serial@2980000 {
 663                         compatible = "fsl,ls1021a-lpuart";
 664                         reg = <0x0 0x2980000 0x0 0x1000>;
 665                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 666                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 667                                             QORIQ_CLK_PLL_DIV(2)>;
 668                         clock-names = "ipg";
 669                         status = "disabled";
 670                 };
 671
 672                 lpuart4: serial@2990000 {
 673                         compatible = "fsl,ls1021a-lpuart";
 674                         reg = <0x0 0x2990000 0x0 0x1000>;
 675                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 676                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 677                                             QORIQ_CLK_PLL_DIV(2)>;
 678                         clock-names = "ipg";
 679                         status = "disabled";
 680                 };
 681
 682                 lpuart5: serial@29a0000 {
 683                         compatible = "fsl,ls1021a-lpuart";
 684                         reg = <0x0 0x29a0000 0x0 0x1000>;
 685                         interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 686                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 687                                             QORIQ_CLK_PLL_DIV(2)>;
 688                         clock-names = "ipg";
 689                         status = "disabled";
 690                 };
 691
 692                 wdog0: watchdog@2ad0000 {
 693                         compatible = "fsl,imx21-wdt";
 694                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 695                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 696                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 697                                             QORIQ_CLK_PLL_DIV(2)>;
 698                         big-endian;
 699                 };
 700
 701                 edma0: dma-controller@2c00000 {
 702                         #dma-cells = <2>;
 703                         compatible = "fsl,vf610-edma";
 704                         reg = <0x0 0x2c00000 0x0 0x10000>,
 705                               <0x0 0x2c10000 0x0 0x10000>,
 706                               <0x0 0x2c20000 0x0 0x10000>;
 707                         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
 708                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 709                         interrupt-names = "edma-tx", "edma-err";
 710                         dma-channels = <32>;
 711                         big-endian;
 712                         clock-names = "dmamux0", "dmamux1";
 713                         clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 714                                             QORIQ_CLK_PLL_DIV(2)>,
 715                                  <&clockgen QORIQ_CLK_PLATFORM_PLL
 716                                             QORIQ_CLK_PLL_DIV(2)>;
 717                 };
 718
 719                 aux_bus: aux_bus {
 720                         #address-cells = <2>;
 721                         #size-cells = <2>;
 722                         compatible = "simple-bus";
 723                         ranges;
 724                         dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 725
 726                         usb0: usb@2f00000 {
 727                                 compatible = "snps,dwc3";
 728                                 reg = <0x0 0x2f00000 0x0 0x10000>;
 729                                 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 730                                 dr_mode = "host";
 731                                 snps,quirk-frame-length-adjustment = <0x20>;
 732                                 snps,dis_rxdet_inp3_quirk;
 733                                 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 734                                 usb3-lpm-capable;
 735                         };
 736
 737                         usb1: usb@3000000 {
 738                                 compatible = "snps,dwc3";
 739                                 reg = <0x0 0x3000000 0x0 0x10000>;
 740                                 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 741                                 dr_mode = "host";
 742                                 snps,quirk-frame-length-adjustment = <0x20>;
 743                                 snps,dis_rxdet_inp3_quirk;
 744                                 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 745                                 usb3-lpm-capable;
 746                         };
 747
 748                         usb2: usb@3100000 {
 749                                 compatible = "snps,dwc3";
 750                                 reg = <0x0 0x3100000 0x0 0x10000>;
 751                                 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 752                                 dr_mode = "host";
 753                                 snps,quirk-frame-length-adjustment = <0x20>;
 754                                 snps,dis_rxdet_inp3_quirk;
 755                                 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 756                                 usb3-lpm-capable;
 757                         };
 758
 759                         sata: sata@3200000 {
 760                                 compatible = "fsl,ls1046a-ahci";
 761                                 reg = <0x0 0x3200000 0x0 0x10000>,
 762                                         <0x0 0x20140520 0x0 0x4>;
 763                                 reg-names = "ahci", "sata-ecc";
 764                                 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 765                                 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 766                                                     QORIQ_CLK_PLL_DIV(2)>;
 767                         };
 768                 };
 769
 770                 msi1: msi-controller@1580000 {
 771                         compatible = "fsl,ls1046a-msi";
 772                         msi-controller;
 773                         reg = <0x0 0x1580000 0x0 0x10000>;
 774                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 775                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
 776                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
 777                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 778                 };
 779
 780                 msi2: msi-controller@1590000 {
 781                         compatible = "fsl,ls1046a-msi";
 782                         msi-controller;
 783                         reg = <0x0 0x1590000 0x0 0x10000>;
 784                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 785                                      <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 786                                      <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 787                                      <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 788                 };
 789
 790                 msi3: msi-controller@15a0000 {
 791                         compatible = "fsl,ls1046a-msi";
 792                         msi-controller;
 793                         reg = <0x0 0x15a0000 0x0 0x10000>;
 794                         interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 795                                      <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
 796                                      <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
 797                                      <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 798                 };
 799
 800                 pcie1: pcie@3400000 {
 801                         compatible = "fsl,ls1046a-pcie";
 802                         reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 803                               <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 804                         reg-names = "regs", "config";
 805                         interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 806                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
 807                         interrupt-names = "aer", "pme";
 808                         #address-cells = <3>;
 809                         #size-cells = <2>;
 810                         device_type = "pci";
 811                         num-viewport = <8>;
 812                         bus-range = <0x0 0xff>;
 813                         ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 814                                   0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 815                         msi-parent = <&msi1>, <&msi2>, <&msi3>;
 816                         #interrupt-cells = <1>;
 817                         interrupt-map-mask = <0 0 0 7>;
 818                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 819                                         <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 820                                         <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 821                                         <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 822                         big-endian;
 823                         status = "disabled";
 824                 };
 825
 826                 pcie_ep1: pcie_ep@3400000 {
 827                         compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
 828                         reg = <0x00 0x03400000 0x0 0x00100000>,
 829                               <0x40 0x00000000 0x8 0x00000000>;
 830                         reg-names = "regs", "addr_space";
 831                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 832                         interrupt-names = "pme";
 833                         num-ib-windows = <6>;
 834                         num-ob-windows = <8>;
 835                         big-endian;
 836                         status = "disabled";
 837                 };
 838
 839                 pcie2: pcie@3500000 {
 840                         compatible = "fsl,ls1046a-pcie";
 841                         reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 842                               <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 843                         reg-names = "regs", "config";
 844                         interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 845                                      <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
 846                         interrupt-names = "aer", "pme";
 847                         #address-cells = <3>;
 848                         #size-cells = <2>;
 849                         device_type = "pci";
 850                         num-viewport = <8>;
 851                         bus-range = <0x0 0xff>;
 852                         ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 853                                   0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 854                         msi-parent = <&msi2>, <&msi3>, <&msi1>;
 855                         #interrupt-cells = <1>;
 856                         interrupt-map-mask = <0 0 0 7>;
 857                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 858                                         <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 859                                         <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 860                                         <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 861                         big-endian;
 862                         status = "disabled";
 863                 };
 864
 865                 pcie_ep2: pcie_ep@3500000 {
 866                         compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
 867                         reg = <0x00 0x03500000 0x0 0x00100000>,
 868                               <0x48 0x00000000 0x8 0x00000000>;
 869                         reg-names = "regs", "addr_space";
 870                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 871                         interrupt-names = "pme";
 872                         num-ib-windows = <6>;
 873                         num-ob-windows = <8>;
 874                         big-endian;
 875                         status = "disabled";
 876                 };
 877
 878                 pcie3: pcie@3600000 {
 879                         compatible = "fsl,ls1046a-pcie";
 880                         reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 881                               <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 882                         reg-names = "regs", "config";
 883                         interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 884                                      <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
 885                         interrupt-names = "aer", "pme";
 886                         #address-cells = <3>;
 887                         #size-cells = <2>;
 888                         device_type = "pci";
 889                         num-viewport = <8>;
 890                         bus-range = <0x0 0xff>;
 891                         ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
 892                                   0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 893                         msi-parent = <&msi3>, <&msi1>, <&msi2>;
 894                         #interrupt-cells = <1>;
 895                         interrupt-map-mask = <0 0 0 7>;
 896                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 897                                         <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 898                                         <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 899                                         <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 900                         big-endian;
 901                         status = "disabled";
 902                 };
 903
 904                 pcie_ep3: pcie_ep@3600000 {
 905                         compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
 906                         reg = <0x00 0x03600000 0x0 0x00100000>,
 907                               <0x50 0x00000000 0x8 0x00000000>;
 908                         reg-names = "regs", "addr_space";
 909                         interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 910                         interrupt-names = "pme";
 911                         num-ib-windows = <6>;
 912                         num-ob-windows = <8>;
 913                         big-endian;
 914                         status = "disabled";
 915                 };
 916
 917                 qdma: dma-controller@8380000 {
 918                         compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
 919                         reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
 920                               <0x0 0x8390000 0x0 0x10000>, /* Status regs */
 921                               <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
 922                         interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 923                                      <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 924                                      <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 925                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 926                                      <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 927                         interrupt-names = "qdma-error", "qdma-queue0",
 928                                 "qdma-queue1", "qdma-queue2", "qdma-queue3";
 929                         dma-channels = <8>;
 930                         block-number = <1>;
 931                         block-offset = <0x10000>;
 932                         fsl,dma-queues = <2>;
 933                         status-sizes = <64>;
 934                         queue-sizes = <64 64>;
 935                         big-endian;
 936                 };
 937
 938                 rcpm: power-controller@1ee2140 {
 939                         compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
 940                         reg = <0x0 0x1ee2140 0x0 0x4>;
 941                         #fsl,rcpm-wakeup-cells = <1>;
 942                 };
 943
 944                 ftm_alarm0: timer@29d0000 {
 945                         compatible = "fsl,ls1046a-ftm-alarm";
 946                         reg = <0x0 0x29d0000 0x0 0x10000>;
 947                         fsl,rcpm-wakeup = <&rcpm 0x20000>;
 948                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 949                         big-endian;
 950                 };
 951         };
 952
 953         reserved-memory {
 954                 #address-cells = <2>;
 955                 #size-cells = <2>;
 956                 ranges;
 957
 958                 bman_fbpr: bman-fbpr {
 959                         compatible = "shared-dma-pool";
 960                         size = <0 0x1000000>;
 961                         alignment = <0 0x1000000>;
 962                         no-map;
 963                 };
 964
 965                 qman_fqd: qman-fqd {
 966                         compatible = "shared-dma-pool";
 967                         size = <0 0x800000>;
 968                         alignment = <0 0x800000>;
 969                         no-map;
 970                 };
 971
 972                 qman_pfdr: qman-pfdr {
 973                         compatible = "shared-dma-pool";
 974                         size = <0 0x2000000>;
 975                         alignment = <0 0x2000000>;
 976                         no-map;
 977                 };
 978         };
 979
 980         firmware {
 981                 optee {
 982                         compatible = "linaro,optee-tz";
 983                         method = "smc";
 984                 };
 985         };
 986 };
 987
 988 #include "qoriq-qman-portals.dtsi"
 989 #include "qoriq-bman-portals.dtsi"