arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SAMSUNG Exynos5433 TM2 board device tree source
   4  *
   5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   6  *
   7  * Common device tree source file for Samsung's TM2 and TM2E boards
   8  * which are based on Samsung Exynos5433 SoC.
   9  */
  10
  11 /dts-v1/;
  12 #include "exynos5433.dtsi"
  13 #include <dt-bindings/clock/samsung,s2mps11.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/interrupt-controller/irq.h>
  17
  18 / {
  19         aliases {
  20                 gsc0 = &gsc_0;
  21                 gsc1 = &gsc_1;
  22                 gsc2 = &gsc_2;
  23                 pinctrl0 = &pinctrl_alive;
  24                 pinctrl1 = &pinctrl_aud;
  25                 pinctrl2 = &pinctrl_cpif;
  26                 pinctrl3 = &pinctrl_ese;
  27                 pinctrl4 = &pinctrl_finger;
  28                 pinctrl5 = &pinctrl_fsys;
  29                 pinctrl6 = &pinctrl_imem;
  30                 pinctrl7 = &pinctrl_nfc;
  31                 pinctrl8 = &pinctrl_peric;
  32                 pinctrl9 = &pinctrl_touch;
  33                 serial0 = &serial_0;
  34                 serial1 = &serial_1;
  35                 serial2 = &serial_2;
  36                 serial3 = &serial_3;
  37                 spi0 = &spi_0;
  38                 spi1 = &spi_1;
  39                 spi2 = &spi_2;
  40                 spi3 = &spi_3;
  41                 spi4 = &spi_4;
  42                 mshc0 = &mshc_0;
  43                 mshc2 = &mshc_2;
  44         };
  45
  46         chosen {
  47                 stdout-path = &serial_1;
  48         };
  49
  50         memory@20000000 {
  51                 device_type = "memory";
  52                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  53         };
  54
  55         gpio-keys {
  56                 compatible = "gpio-keys";
  57
  58                 power-key {
  59                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_POWER>;
  61                         label = "power key";
  62                         debounce-interval = <10>;
  63                 };
  64
  65                 volume-up-key {
  66                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_VOLUMEUP>;
  68                         label = "volume-up key";
  69                         debounce-interval = <10>;
  70                 };
  71
  72                 volume-down-key {
  73                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  74                         linux,code = <KEY_VOLUMEDOWN>;
  75                         label = "volume-down key";
  76                         debounce-interval = <10>;
  77                 };
  78
  79                 homepage-key {
  80                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  81                         linux,code = <KEY_MENU>;
  82                         label = "homepage key";
  83                         debounce-interval = <10>;
  84                 };
  85         };
  86
  87         i2c_max98504: i2c-gpio-0 {
  88                 compatible = "i2c-gpio";
  89                 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
  90                          &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
  91                 i2c-gpio,delay-us = <2>;
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94                 status = "okay";
  95
  96                 max98504: max98504@31 {
  97                         compatible = "maxim,max98504";
  98                         reg = <0x31>;
  99                         maxim,rx-path = <1>;
 100                         maxim,tx-path = <1>;
 101                         maxim,tx-channel-mask = <3>;
 102                         maxim,tx-channel-source = <2>;
 103                 };
 104         };
 105
 106         irda_regulator: irda-regulator {
 107                 compatible = "regulator-fixed";
 108                 enable-active-high;
 109                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 110                 regulator-name = "irda_regulator";
 111         };
 112
 113         sound {
 114                 compatible = "samsung,tm2-audio";
 115                 audio-codec = <&wm5110>;
 116                 i2s-controller = <&i2s0>;
 117                 audio-amplifier = <&max98504>;
 118                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 119                 model = "wm5110";
 120                 samsung,audio-routing =
 121                         /* Headphone */
 122                         "HP", "HPOUT1L",
 123                         "HP", "HPOUT1R",
 124
 125                         /* Speaker */
 126                         "SPK", "SPKOUT",
 127                         "SPKOUT", "HPOUT2L",
 128                         "SPKOUT", "HPOUT2R",
 129
 130                         /* Receiver */
 131                         "RCV", "HPOUT3L",
 132                         "RCV", "HPOUT3R";
 133                 status = "okay";
 134         };
 135 };
 136
 137 &adc {
 138         vdd-supply = <&ldo3_reg>;
 139         status = "okay";
 140
 141         thermistor-ap {
 142                 compatible = "murata,ncp03wf104";
 143                 pullup-uv = <1800000>;
 144                 pullup-ohm = <100000>;
 145                 pulldown-ohm = <0>;
 146                 io-channels = <&adc 0>;
 147         };
 148
 149         thermistor-battery {
 150                 compatible = "murata,ncp03wf104";
 151                 pullup-uv = <1800000>;
 152                 pullup-ohm = <100000>;
 153                 pulldown-ohm = <0>;
 154                 io-channels = <&adc 1>;
 155                 #thermal-sensor-cells = <0>;
 156         };
 157
 158         thermistor-charger {
 159                 compatible = "murata,ncp03wf104";
 160                 pullup-uv = <1800000>;
 161                 pullup-ohm = <100000>;
 162                 pulldown-ohm = <0>;
 163                 io-channels = <&adc 2>;
 164         };
 165 };
 166
 167 &bus_g2d_400 {
 168         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 169         vdd-supply = <&buck4_reg>;
 170         exynos,saturation-ratio = <10>;
 171         status = "okay";
 172 };
 173
 174 &bus_g2d_266 {
 175         devfreq = <&bus_g2d_400>;
 176         status = "okay";
 177 };
 178
 179 &bus_gscl {
 180         devfreq = <&bus_g2d_400>;
 181         status = "okay";
 182 };
 183
 184 &bus_hevc {
 185         devfreq = <&bus_g2d_400>;
 186         status = "okay";
 187 };
 188
 189 &bus_jpeg {
 190         devfreq = <&bus_g2d_400>;
 191         status = "okay";
 192 };
 193
 194 &bus_mfc {
 195         devfreq = <&bus_g2d_400>;
 196         status = "okay";
 197 };
 198
 199 &bus_mscl {
 200         devfreq = <&bus_g2d_400>;
 201         status = "okay";
 202 };
 203
 204 &bus_noc0 {
 205         devfreq = <&bus_g2d_400>;
 206         status = "okay";
 207 };
 208
 209 &bus_noc1 {
 210         devfreq = <&bus_g2d_400>;
 211         status = "okay";
 212 };
 213
 214 &bus_noc2 {
 215         devfreq = <&bus_g2d_400>;
 216         status = "okay";
 217 };
 218
 219 &cmu_aud {
 220         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
 221         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
 222 };
 223
 224 &cmu_fsys {
 225         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 226                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 227                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 228                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 229                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 230                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 231                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 232                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 233                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 234                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 235         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 236                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 237                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 238                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 239                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 240                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 241                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 242                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 243         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 244                                <66700000>, <66700000>;
 245 };
 246
 247 &cmu_gscl {
 248         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 249                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 250         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 251                                  <&cmu_top CLK_ACLK_GSCL_333>;
 252 };
 253
 254 &cmu_mfc {
 255         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 256         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 257 };
 258
 259 &cmu_mscl {
 260         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 261                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 262                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 263                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 264         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 265                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 266                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 267                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 268 };
 269
 270 &cpu0 {
 271         cpu-supply = <&buck3_reg>;
 272 };
 273
 274 &cpu4 {
 275         cpu-supply = <&buck2_reg>;
 276 };
 277
 278 &decon {
 279         status = "okay";
 280 };
 281
 282 &decon_tv {
 283         status = "okay";
 284
 285         ports {
 286                 #address-cells = <1>;
 287                 #size-cells = <0>;
 288
 289                 port@0 {
 290                         reg = <0>;
 291                         tv_to_hdmi: endpoint {
 292                                 remote-endpoint = <&hdmi_to_tv>;
 293                         };
 294                 };
 295         };
 296 };
 297
 298 &dsi {
 299         status = "okay";
 300         vddcore-supply = <&ldo6_reg>;
 301         vddio-supply = <&ldo7_reg>;
 302         samsung,burst-clock-frequency = <512000000>;
 303         samsung,esc-clock-frequency = <16000000>;
 304         samsung,pll-clock-frequency = <24000000>;
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&te_irq>;
 307 };
 308
 309 &hdmi {
 310         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 311         status = "okay";
 312         vdd-supply = <&ldo6_reg>;
 313         vdd_osc-supply = <&ldo7_reg>;
 314         vdd_pll-supply = <&ldo6_reg>;
 315
 316         ports {
 317                 #address-cells = <1>;
 318                 #size-cells = <0>;
 319
 320                 port@0 {
 321                         reg = <0>;
 322                         hdmi_to_tv: endpoint {
 323                                 remote-endpoint = <&tv_to_hdmi>;
 324                         };
 325                 };
 326
 327                 port@1 {
 328                         reg = <1>;
 329                         hdmi_to_mhl: endpoint {
 330                                 remote-endpoint = <&mhl_to_hdmi>;
 331                         };
 332                 };
 333         };
 334 };
 335
 336 &hsi2c_0 {
 337         status = "okay";
 338         clock-frequency = <2500000>;
 339
 340         s2mps13-pmic@66 {
 341                 compatible = "samsung,s2mps13-pmic";
 342                 interrupt-parent = <&gpa0>;
 343                 interrupts = <7 IRQ_TYPE_NONE>;
 344                 reg = <0x66>;
 345                 samsung,s2mps11-wrstbi-ground;
 346
 347                 s2mps13_osc: clocks {
 348                         compatible = "samsung,s2mps13-clk";
 349                         #clock-cells = <1>;
 350                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 351                                 "s2mps13_bt";
 352                 };
 353
 354                 regulators {
 355                         ldo1_reg: LDO1 {
 356                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 357                                 regulator-min-microvolt = <900000>;
 358                                 regulator-max-microvolt = <900000>;
 359                                 regulator-always-on;
 360                         };
 361
 362                         ldo2_reg: LDO2 {
 363                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 364                                 regulator-min-microvolt = <2800000>;
 365                                 regulator-max-microvolt = <2800000>;
 366                                 regulator-always-on;
 367                                 regulator-state-mem {
 368                                         regulator-off-in-suspend;
 369                                 };
 370                         };
 371
 372                         ldo3_reg: LDO3 {
 373                                 regulator-name = "VDD1_E_1.8V_AP";
 374                                 regulator-min-microvolt = <1800000>;
 375                                 regulator-max-microvolt = <1800000>;
 376                                 regulator-always-on;
 377                         };
 378
 379                         ldo4_reg: LDO4 {
 380                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 381                                 regulator-min-microvolt = <1300000>;
 382                                 regulator-max-microvolt = <1300000>;
 383                                 regulator-always-on;
 384                                 regulator-state-mem {
 385                                         regulator-off-in-suspend;
 386                                 };
 387                         };
 388
 389                         ldo5_reg: LDO5 {
 390                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 391                                 regulator-min-microvolt = <1000000>;
 392                                 regulator-max-microvolt = <1000000>;
 393                                 regulator-always-on;
 394                                 regulator-state-mem {
 395                                         regulator-off-in-suspend;
 396                                 };
 397                         };
 398
 399                         ldo6_reg: LDO6 {
 400                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 401                                 regulator-min-microvolt = <1000000>;
 402                                 regulator-max-microvolt = <1000000>;
 403                                 regulator-state-mem {
 404                                         regulator-off-in-suspend;
 405                                 };
 406                         };
 407
 408                         ldo7_reg: LDO7 {
 409                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 410                                 regulator-min-microvolt = <1800000>;
 411                                 regulator-max-microvolt = <1800000>;
 412                                 regulator-always-on;
 413                                 regulator-state-mem {
 414                                         regulator-off-in-suspend;
 415                                 };
 416                         };
 417
 418                         ldo8_reg: LDO8 {
 419                                 regulator-name = "VDD18_LLI_1.8V_AP";
 420                                 regulator-min-microvolt = <1800000>;
 421                                 regulator-max-microvolt = <1800000>;
 422                                 regulator-always-on;
 423                                 regulator-state-mem {
 424                                         regulator-off-in-suspend;
 425                                 };
 426                         };
 427
 428                         ldo9_reg: LDO9 {
 429                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 430                                 regulator-min-microvolt = <1800000>;
 431                                 regulator-max-microvolt = <1800000>;
 432                                 regulator-always-on;
 433                                 regulator-state-mem {
 434                                         regulator-off-in-suspend;
 435                                 };
 436                         };
 437
 438                         ldo10_reg: LDO10 {
 439                                 regulator-name = "VDD33_USB30_3.0V_AP";
 440                                 regulator-min-microvolt = <3000000>;
 441                                 regulator-max-microvolt = <3000000>;
 442                                 regulator-state-mem {
 443                                         regulator-off-in-suspend;
 444                                 };
 445                         };
 446
 447                         ldo11_reg: LDO11 {
 448                                 regulator-name = "VDD_INT_M_1.0V_AP";
 449                                 regulator-min-microvolt = <1000000>;
 450                                 regulator-max-microvolt = <1000000>;
 451                                 regulator-always-on;
 452                                 regulator-state-mem {
 453                                         regulator-off-in-suspend;
 454                                 };
 455                         };
 456
 457                         ldo12_reg: LDO12 {
 458                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 459                                 regulator-min-microvolt = <800000>;
 460                                 regulator-max-microvolt = <1350000>;
 461                                 regulator-always-on;
 462                         };
 463
 464                         ldo13_reg: LDO13 {
 465                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 466                                 regulator-min-microvolt = <950000>;
 467                                 regulator-max-microvolt = <950000>;
 468                                 regulator-always-on;
 469                                 regulator-state-mem {
 470                                         regulator-off-in-suspend;
 471                                 };
 472                         };
 473
 474                         ldo14_reg: LDO14 {
 475                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 476                                 regulator-min-microvolt = <1200000>;
 477                                 regulator-max-microvolt = <1200000>;
 478                                 regulator-always-on;
 479                                 regulator-state-mem {
 480                                         regulator-off-in-suspend;
 481                                 };
 482                         };
 483
 484                         ldo15_reg: LDO15 {
 485                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 486                                 regulator-min-microvolt = <1200000>;
 487                                 regulator-max-microvolt = <1200000>;
 488                                 regulator-always-on;
 489                                 regulator-state-mem {
 490                                         regulator-off-in-suspend;
 491                                 };
 492                         };
 493
 494                         ldo16_reg: LDO16 {
 495                                 regulator-name = "VDDQ_EFUSE";
 496                                 regulator-min-microvolt = <1400000>;
 497                                 regulator-max-microvolt = <3400000>;
 498                                 regulator-always-on;
 499                         };
 500
 501                         ldo17_reg: LDO17 {
 502                                 regulator-name = "V_TFLASH_2.8V_AP";
 503                                 regulator-min-microvolt = <2800000>;
 504                                 regulator-max-microvolt = <2800000>;
 505                         };
 506
 507                         ldo18_reg: LDO18 {
 508                                 regulator-name = "V_CODEC_1.8V_AP";
 509                                 regulator-min-microvolt = <1800000>;
 510                                 regulator-max-microvolt = <1800000>;
 511                         };
 512
 513                         ldo19_reg: LDO19 {
 514                                 regulator-name = "VDDA_1.8V_COMP";
 515                                 regulator-min-microvolt = <1800000>;
 516                                 regulator-max-microvolt = <1800000>;
 517                                 regulator-always-on;
 518                         };
 519
 520                         ldo20_reg: LDO20 {
 521                                 regulator-name = "VCC_2.8V_AP";
 522                                 regulator-min-microvolt = <2800000>;
 523                                 regulator-max-microvolt = <2800000>;
 524                                 regulator-always-on;
 525                         };
 526
 527                         ldo21_reg: LDO21 {
 528                                 regulator-name = "VT_CAM_1.8V";
 529                                 regulator-min-microvolt = <1800000>;
 530                                 regulator-max-microvolt = <1800000>;
 531                         };
 532
 533                         ldo22_reg: LDO22 {
 534                                 regulator-name = "CAM_IO_1.8V_AP";
 535                                 regulator-min-microvolt = <1800000>;
 536                                 regulator-max-microvolt = <1800000>;
 537                         };
 538
 539                         ldo23_reg: LDO23 {
 540                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 541                                 regulator-min-microvolt = <1050000>;
 542                                 regulator-max-microvolt = <1050000>;
 543                         };
 544
 545                         ldo24_reg: LDO24 {
 546                                 regulator-name = "VT_CAM_1.2V";
 547                                 regulator-min-microvolt = <1200000>;
 548                                 regulator-max-microvolt = <1200000>;
 549                         };
 550
 551                         ldo25_reg: LDO25 {
 552                                 regulator-name = "UNUSED_LDO25";
 553                                 regulator-min-microvolt = <2800000>;
 554                                 regulator-max-microvolt = <2800000>;
 555                         };
 556
 557                         ldo26_reg: LDO26 {
 558                                 regulator-name = "CAM_AF_2.8V_AP";
 559                                 regulator-min-microvolt = <2800000>;
 560                                 regulator-max-microvolt = <2800000>;
 561                         };
 562
 563                         ldo27_reg: LDO27 {
 564                                 regulator-name = "VCC_3.0V_LCD_AP";
 565                                 regulator-min-microvolt = <3000000>;
 566                                 regulator-max-microvolt = <3000000>;
 567                         };
 568
 569                         ldo28_reg: LDO28 {
 570                                 regulator-name = "VCC_1.8V_LCD_AP";
 571                                 regulator-min-microvolt = <1800000>;
 572                                 regulator-max-microvolt = <1800000>;
 573                         };
 574
 575                         ldo29_reg: LDO29 {
 576                                 regulator-name = "VT_CAM_2.8V";
 577                                 regulator-min-microvolt = <3000000>;
 578                                 regulator-max-microvolt = <3000000>;
 579                         };
 580
 581                         ldo30_reg: LDO30 {
 582                                 regulator-name = "TSP_AVDD_3.3V_AP";
 583                                 regulator-min-microvolt = <3300000>;
 584                                 regulator-max-microvolt = <3300000>;
 585                         };
 586
 587                         ldo31_reg: LDO31 {
 588                                 /*
 589                                  * LDO31 differs from target to target,
 590                                  * its definition is in the .dts
 591                                  */
 592                         };
 593
 594                         ldo32_reg: LDO32 {
 595                                 regulator-name = "VTOUCH_1.8V_AP";
 596                                 regulator-min-microvolt = <1800000>;
 597                                 regulator-max-microvolt = <1800000>;
 598                         };
 599
 600                         ldo33_reg: LDO33 {
 601                                 regulator-name = "VTOUCH_LED_3.3V";
 602                                 regulator-min-microvolt = <2500000>;
 603                                 regulator-max-microvolt = <3300000>;
 604                                 regulator-ramp-delay = <12500>;
 605                         };
 606
 607                         ldo34_reg: LDO34 {
 608                                 regulator-name = "VCC_1.8V_MHL_AP";
 609                                 regulator-min-microvolt = <1000000>;
 610                                 regulator-max-microvolt = <2100000>;
 611                         };
 612
 613                         ldo35_reg: LDO35 {
 614                                 regulator-name = "OIS_VM_2.8V";
 615                                 regulator-min-microvolt = <1800000>;
 616                                 regulator-max-microvolt = <2800000>;
 617                         };
 618
 619                         ldo36_reg: LDO36 {
 620                                 regulator-name = "VSIL_1.0V";
 621                                 regulator-min-microvolt = <1000000>;
 622                                 regulator-max-microvolt = <1000000>;
 623                         };
 624
 625                         ldo37_reg: LDO37 {
 626                                 regulator-name = "VF_1.8V";
 627                                 regulator-min-microvolt = <1800000>;
 628                                 regulator-max-microvolt = <1800000>;
 629                         };
 630
 631                         ldo38_reg: LDO38 {
 632                                 /*
 633                                  * LDO38 differs from target to target,
 634                                  * its definition is in the .dts
 635                                  */
 636                         };
 637
 638                         ldo39_reg: LDO39 {
 639                                 regulator-name = "V_HRM_1.8V";
 640                                 regulator-min-microvolt = <1800000>;
 641                                 regulator-max-microvolt = <1800000>;
 642                         };
 643
 644                         ldo40_reg: LDO40 {
 645                                 regulator-name = "V_HRM_3.3V";
 646                                 regulator-min-microvolt = <3300000>;
 647                                 regulator-max-microvolt = <3300000>;
 648                         };
 649
 650                         buck1_reg: BUCK1 {
 651                                 regulator-name = "VDD_MIF_0.9V_AP";
 652                                 regulator-min-microvolt = <600000>;
 653                                 regulator-max-microvolt = <1500000>;
 654                                 regulator-always-on;
 655                                 regulator-state-mem {
 656                                         regulator-off-in-suspend;
 657                                 };
 658                         };
 659
 660                         buck2_reg: BUCK2 {
 661                                 regulator-name = "VDD_EGL_1.0V_AP";
 662                                 regulator-min-microvolt = <900000>;
 663                                 regulator-max-microvolt = <1300000>;
 664                                 regulator-always-on;
 665                                 regulator-state-mem {
 666                                         regulator-off-in-suspend;
 667                                 };
 668                         };
 669
 670                         buck3_reg: BUCK3 {
 671                                 regulator-name = "VDD_KFC_1.0V_AP";
 672                                 regulator-min-microvolt = <800000>;
 673                                 regulator-max-microvolt = <1200000>;
 674                                 regulator-always-on;
 675                                 regulator-state-mem {
 676                                         regulator-off-in-suspend;
 677                                 };
 678                         };
 679
 680                         buck4_reg: BUCK4 {
 681                                 regulator-name = "VDD_INT_0.95V_AP";
 682                                 regulator-min-microvolt = <600000>;
 683                                 regulator-max-microvolt = <1500000>;
 684                                 regulator-always-on;
 685                                 regulator-state-mem {
 686                                         regulator-off-in-suspend;
 687                                 };
 688                         };
 689
 690                         buck5_reg: BUCK5 {
 691                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 692                                 regulator-min-microvolt = <600000>;
 693                                 regulator-max-microvolt = <1500000>;
 694                                 regulator-always-on;
 695                                 regulator-state-mem {
 696                                         regulator-off-in-suspend;
 697                                 };
 698                         };
 699
 700                         buck6_reg: BUCK6 {
 701                                 regulator-name = "VDD_G3D_0.9V_AP";
 702                                 regulator-min-microvolt = <600000>;
 703                                 regulator-max-microvolt = <1500000>;
 704                                 regulator-always-on;
 705                                 regulator-state-mem {
 706                                         regulator-off-in-suspend;
 707                                 };
 708                         };
 709
 710                         buck7_reg: BUCK7 {
 711                                 regulator-name = "VDD_MEM1_1.2V_AP";
 712                                 regulator-min-microvolt = <1200000>;
 713                                 regulator-max-microvolt = <1200000>;
 714                                 regulator-always-on;
 715                         };
 716
 717                         buck8_reg: BUCK8 {
 718                                 regulator-name = "VDD_LLDO_1.35V_AP";
 719                                 regulator-min-microvolt = <1350000>;
 720                                 regulator-max-microvolt = <3300000>;
 721                                 regulator-always-on;
 722                         };
 723
 724                         buck9_reg: BUCK9 {
 725                                 regulator-name = "VDD_MLDO_2.0V_AP";
 726                                 regulator-min-microvolt = <1350000>;
 727                                 regulator-max-microvolt = <3300000>;
 728                                 regulator-always-on;
 729                         };
 730
 731                         buck10_reg: BUCK10 {
 732                                 regulator-name = "vdd_mem2";
 733                                 regulator-min-microvolt = <550000>;
 734                                 regulator-max-microvolt = <1500000>;
 735                                 regulator-always-on;
 736                         };
 737                 };
 738         };
 739 };
 740
 741 &hsi2c_4 {
 742         status = "okay";
 743
 744         s3fwrn5: nfc@27 {
 745                 compatible = "samsung,s3fwrn5-i2c";
 746                 reg = <0x27>;
 747                 interrupt-parent = <&gpa1>;
 748                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 749                 s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
 750                 s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 751         };
 752 };
 753
 754 &hsi2c_5 {
 755         status = "okay";
 756
 757         stmfts: touchscreen@49 {
 758                 compatible = "st,stmfts";
 759                 reg = <0x49>;
 760                 interrupt-parent = <&gpa1>;
 761                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 762                 avdd-supply = <&ldo30_reg>;
 763                 vdd-supply = <&ldo31_reg>;
 764         };
 765 };
 766
 767 &hsi2c_7 {
 768         status = "okay";
 769         clock-frequency = <1000000>;
 770
 771         sii8620@39 {
 772                 reg = <0x39>;
 773                 compatible = "sil,sii8620";
 774                 cvcc10-supply = <&ldo36_reg>;
 775                 iovcc18-supply = <&ldo34_reg>;
 776                 interrupt-parent = <&gpf0>;
 777                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 778                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 779                 clocks = <&pmu_system_controller 0>;
 780                 clock-names = "xtal";
 781
 782                 port {
 783                         mhl_to_hdmi: endpoint {
 784                                 remote-endpoint = <&hdmi_to_mhl>;
 785                         };
 786                 };
 787         };
 788 };
 789
 790 &hsi2c_8 {
 791         status = "okay";
 792
 793         max77843@66 {
 794                 compatible = "maxim,max77843";
 795                 interrupt-parent = <&gpa1>;
 796                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 797                 reg = <0x66>;
 798
 799                 muic: max77843-muic {
 800                         compatible = "maxim,max77843-muic";
 801                 };
 802
 803                 regulators {
 804                         compatible = "maxim,max77843-regulator";
 805                         safeout1_reg: SAFEOUT1 {
 806                                 regulator-name = "SAFEOUT1";
 807                                 regulator-min-microvolt = <3300000>;
 808                                 regulator-max-microvolt = <4950000>;
 809                         };
 810
 811                         safeout2_reg: SAFEOUT2 {
 812                                 regulator-name = "SAFEOUT2";
 813                                 regulator-min-microvolt = <3300000>;
 814                                 regulator-max-microvolt = <4950000>;
 815                         };
 816
 817                         charger_reg: CHARGER {
 818                                 regulator-name = "CHARGER";
 819                                 regulator-min-microamp = <100000>;
 820                                 regulator-max-microamp = <3150000>;
 821                         };
 822                 };
 823
 824                 haptic: max77843-haptic {
 825                         compatible = "maxim,max77843-haptic";
 826                         haptic-supply = <&ldo38_reg>;
 827                         pwms = <&pwm 0 33670 0>;
 828                         pwm-names = "haptic";
 829                 };
 830         };
 831 };
 832
 833 &hsi2c_11 {
 834         status = "okay";
 835 };
 836
 837 &i2s0 {
 838         status = "okay";
 839 };
 840
 841 &mshc_0 {
 842         status = "okay";
 843         mmc-hs200-1_8v;
 844         mmc-hs400-1_8v;
 845         cap-mmc-highspeed;
 846         non-removable;
 847         card-detect-delay = <200>;
 848         samsung,dw-mshc-ciu-div = <3>;
 849         samsung,dw-mshc-sdr-timing = <0 4>;
 850         samsung,dw-mshc-ddr-timing = <0 2>;
 851         samsung,dw-mshc-hs400-timing = <0 3>;
 852         samsung,read-strobe-delay = <90>;
 853         fifo-depth = <0x80>;
 854         pinctrl-names = "default";
 855         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 856                         &sd0_bus8 &sd0_rdqs>;
 857         bus-width = <8>;
 858         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 859         assigned-clock-rates = <800000000>;
 860 };
 861
 862 &mshc_2 {
 863         status = "okay";
 864         cap-sd-highspeed;
 865         disable-wp;
 866         cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
 867         cd-inverted;
 868         card-detect-delay = <200>;
 869         samsung,dw-mshc-ciu-div = <3>;
 870         samsung,dw-mshc-sdr-timing = <0 4>;
 871         samsung,dw-mshc-ddr-timing = <0 2>;
 872         fifo-depth = <0x80>;
 873         pinctrl-names = "default";
 874         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 875         bus-width = <4>;
 876 };
 877
 878 &ppmu_d0_general {
 879         status = "okay";
 880         events {
 881                 ppmu_event0_d0_general: ppmu-event0-d0-general {
 882                         event-name = "ppmu-event0-d0-general";
 883                 };
 884         };
 885 };
 886
 887 &ppmu_d1_general {
 888         status = "okay";
 889         events {
 890                 ppmu_event0_d1_general: ppmu-event0-d1-general {
 891                        event-name = "ppmu-event0-d1-general";
 892                };
 893        };
 894 };
 895
 896 &pinctrl_alive {
 897         pinctrl-names = "default";
 898         pinctrl-0 = <&initial_alive>;
 899
 900         initial_alive: initial-state {
 901                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
 902                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
 903                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
 904                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
 905                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
 906                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
 907                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
 908                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
 909
 910                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
 911                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
 912                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
 913                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
 914                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
 915                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
 916                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
 917                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
 918
 919                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
 920                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
 921                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
 922                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
 923                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
 924                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
 925                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
 926                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
 927
 928                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
 929                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
 930                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
 931                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
 932                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
 933                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
 934                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
 935                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
 936
 937                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
 938                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
 939                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
 940                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
 941                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
 942                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
 943                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
 944
 945                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
 946                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
 947                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
 948                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
 949
 950                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
 951                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
 952                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
 953                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
 954
 955                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
 956                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
 957                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
 958                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
 959                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
 960                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
 961                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
 962                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
 963
 964                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
 965                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
 966                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
 967                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
 968                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
 969                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
 970                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
 971                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
 972         };
 973
 974         te_irq: te_irq {
 975                 samsung,pins = "gpf1-3";
 976                 samsung,pin-function = <0xf>;
 977         };
 978 };
 979
 980 &pinctrl_cpif {
 981         pinctrl-names = "default";
 982         pinctrl-0 = <&initial_cpif>;
 983
 984         initial_cpif: initial-state {
 985                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
 986                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
 987         };
 988 };
 989
 990 &pinctrl_ese {
 991         pinctrl-names = "default";
 992         pinctrl-0 = <&initial_ese>;
 993
 994         initial_ese: initial-state {
 995                 PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
 996                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
 997                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
 998         };
 999 };
1000
1001 &pinctrl_fsys {
1002         pinctrl-names = "default";
1003         pinctrl-0 = <&initial_fsys>;
1004
1005         initial_fsys: initial-state {
1006                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1007                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1008                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1009                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1010                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1011         };
1012 };
1013
1014 &pinctrl_imem {
1015         pinctrl-names = "default";
1016         pinctrl-0 = <&initial_imem>;
1017
1018         initial_imem: initial-state {
1019                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1020                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1021                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1022                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1023                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1024                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1025                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1026                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1027         };
1028 };
1029
1030 &pinctrl_nfc {
1031         pinctrl-names = "default";
1032         pinctrl-0 = <&initial_nfc>;
1033
1034         initial_nfc: initial-state {
1035                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1036         };
1037 };
1038
1039 &pinctrl_peric {
1040         pinctrl-names = "default";
1041         pinctrl-0 = <&initial_peric>;
1042
1043         initial_peric: initial-state {
1044                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1045                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1046                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1047                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1048                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1049                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1050
1051                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1052
1053                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1054                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1055                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1056
1057                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1058
1059                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1060                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1061                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1062                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1063
1064                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1065                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1066
1067                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1068
1069                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1070                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1071                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1072                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1073                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1074
1075                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1076
1077                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1078
1079                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1080                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1081                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1082                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1083                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1084
1085                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1086                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1087
1088                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1089                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1090                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1091         };
1092 };
1093
1094 &pinctrl_touch {
1095         pinctrl-names = "default";
1096         pinctrl-0 = <&initial_touch>;
1097
1098         initial_touch: initial-state {
1099                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1100         };
1101 };
1102
1103 &pwm {
1104         pinctrl-0 = <&pwm0_out>;
1105         pinctrl-names = "default";
1106         status = "okay";
1107 };
1108
1109 &mic {
1110         status = "okay";
1111 };
1112
1113 &pmu_system_controller {
1114         assigned-clocks = <&pmu_system_controller 0>;
1115         assigned-clock-parents = <&xxti>;
1116 };
1117
1118 &serial_1 {
1119         status = "okay";
1120 };
1121
1122 &spi_1 {
1123         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1124         status = "okay";
1125
1126         wm5110: wm5110-codec@0 {
1127                 compatible = "wlf,wm5110";
1128                 reg = <0x0>;
1129                 spi-max-frequency = <20000000>;
1130                 interrupt-parent = <&gpa0>;
1131                 interrupts = <4 IRQ_TYPE_NONE>;
1132                 clocks = <&pmu_system_controller 0>,
1133                         <&s2mps13_osc S2MPS11_CLK_BT>;
1134                 clock-names = "mclk1", "mclk2";
1135
1136                 gpio-controller;
1137                 #gpio-cells = <2>;
1138
1139                 wlf,micd-detect-debounce = <300>;
1140                 wlf,micd-bias-start-time = <0x1>;
1141                 wlf,micd-rate = <0x7>;
1142                 wlf,micd-dbtime = <0x1>;
1143                 wlf,micd-force-micbias;
1144                 wlf,micd-configs = <0x0 1 0>;
1145                 wlf,hpdet-channel = <1>;
1146                 wlf,gpsw = <0x1>;
1147                 wlf,inmode = <2 0 2 0>;
1148
1149                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1150                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1151
1152                 /* core supplies */
1153                 AVDD-supply = <&ldo18_reg>;
1154                 DBVDD1-supply = <&ldo18_reg>;
1155                 CPVDD-supply = <&ldo18_reg>;
1156                 DBVDD2-supply = <&ldo18_reg>;
1157                 DBVDD3-supply = <&ldo18_reg>;
1158
1159                 controller-data {
1160                         samsung,spi-feedback-delay = <0>;
1161                 };
1162         };
1163 };
1164
1165 &spi_3 {
1166         status = "okay";
1167         no-cs-readback;
1168
1169         irled@0 {
1170                 compatible = "ir-spi-led";
1171                 reg = <0x0>;
1172                 spi-max-frequency = <5000000>;
1173                 power-supply = <&irda_regulator>;
1174                 duty-cycle = <60>;
1175                 led-active-low;
1176
1177                 controller-data {
1178                         samsung,spi-feedback-delay = <0>;
1179                 };
1180         };
1181 };
1182
1183 &timer {
1184         clock-frequency = <24000000>;
1185 };
1186
1187 &tmu_atlas0 {
1188         vtmu-supply = <&ldo3_reg>;
1189         status = "okay";
1190 };
1191
1192 &tmu_apollo {
1193         vtmu-supply = <&ldo3_reg>;
1194         status = "okay";
1195 };
1196
1197 &tmu_g3d {
1198         vtmu-supply = <&ldo3_reg>;
1199         status = "okay";
1200 };
1201
1202 &usbdrd30 {
1203         vdd33-supply = <&ldo10_reg>;
1204         vdd10-supply = <&ldo6_reg>;
1205         status = "okay";
1206 };
1207
1208 &usbdrd_dwc3 {
1209         dr_mode = "otg";
1210         extcon = <&muic>;
1211 };
1212
1213 &usbdrd30_phy {
1214         vbus-supply = <&safeout1_reg>;
1215         status = "okay";
1216 };
1217
1218 &xxti {
1219         clock-frequency = <24000000>;
1220 };