arm64: add CPU_HOTPLUG infrastructure
[linux-2.6-block.git] / arch / arm64 / Kconfig
1 config ARM64
2         def_bool y
3         select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
4         select ARCH_USE_CMPXCHG_LOCKREF
5         select ARCH_WANT_OPTIONAL_GPIOLIB
6         select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
7         select ARCH_WANT_FRAME_POINTERS
8         select ARM_AMBA
9         select ARM_ARCH_TIMER
10         select ARM_GIC
11         select BUILDTIME_EXTABLE_SORT
12         select CLONE_BACKWARDS
13         select COMMON_CLK
14         select GENERIC_CLOCKEVENTS
15         select GENERIC_IOMAP
16         select GENERIC_IRQ_PROBE
17         select GENERIC_IRQ_SHOW
18         select GENERIC_SMP_IDLE_THREAD
19         select GENERIC_TIME_VSYSCALL
20         select HARDIRQS_SW_RESEND
21         select HAVE_ARCH_TRACEHOOK
22         select HAVE_DEBUG_BUGVERBOSE
23         select HAVE_DEBUG_KMEMLEAK
24         select HAVE_DMA_API_DEBUG
25         select HAVE_DMA_ATTRS
26         select HAVE_GENERIC_DMA_COHERENT
27         select HAVE_HW_BREAKPOINT if PERF_EVENTS
28         select HAVE_MEMBLOCK
29         select HAVE_PERF_EVENTS
30         select IRQ_DOMAIN
31         select MODULES_USE_ELF_RELA
32         select NO_BOOTMEM
33         select OF
34         select OF_EARLY_FLATTREE
35         select PERF_USE_VMALLOC
36         select POWER_RESET
37         select POWER_SUPPLY
38         select RTC_LIB
39         select SPARSE_IRQ
40         select SYSCTL_EXCEPTION_TRACE
41         help
42           ARM 64-bit (AArch64) Linux support.
43
44 config 64BIT
45         def_bool y
46
47 config ARCH_PHYS_ADDR_T_64BIT
48         def_bool y
49
50 config MMU
51         def_bool y
52
53 config NO_IOPORT
54         def_bool y
55
56 config STACKTRACE_SUPPORT
57         def_bool y
58
59 config LOCKDEP_SUPPORT
60         def_bool y
61
62 config TRACE_IRQFLAGS_SUPPORT
63         def_bool y
64
65 config GENERIC_LOCKBREAK
66         def_bool y
67         depends on SMP && PREEMPT
68
69 config RWSEM_GENERIC_SPINLOCK
70         def_bool y
71
72 config GENERIC_HWEIGHT
73         def_bool y
74
75 config GENERIC_CSUM
76         def_bool y
77
78 config GENERIC_CALIBRATE_DELAY
79         def_bool y
80
81 config ZONE_DMA32
82         def_bool y
83
84 config ARCH_DMA_ADDR_T_64BIT
85         def_bool y
86
87 config NEED_DMA_MAP_STATE
88         def_bool y
89
90 config NEED_SG_DMA_LENGTH
91         def_bool y
92
93 config SWIOTLB
94         def_bool y
95
96 config IOMMU_HELPER
97         def_bool SWIOTLB
98
99 config KERNEL_MODE_NEON
100         def_bool y
101
102 source "init/Kconfig"
103
104 source "kernel/Kconfig.freezer"
105
106 menu "Platform selection"
107
108 config ARCH_VEXPRESS
109         bool "ARMv8 software model (Versatile Express)"
110         select ARCH_REQUIRE_GPIOLIB
111         select COMMON_CLK_VERSATILE
112         select POWER_RESET_VEXPRESS
113         select VEXPRESS_CONFIG
114         help
115           This enables support for the ARMv8 software model (Versatile
116           Express).
117
118 config ARCH_XGENE
119         bool "AppliedMicro X-Gene SOC Family"
120         help
121           This enables support for AppliedMicro X-Gene SOC Family
122
123 endmenu
124
125 menu "Bus support"
126
127 config ARM_AMBA
128         bool
129
130 endmenu
131
132 menu "Kernel Features"
133
134 config ARM64_64K_PAGES
135         bool "Enable 64KB pages support"
136         help
137           This feature enables 64KB pages support (4KB by default)
138           allowing only two levels of page tables and faster TLB
139           look-up. AArch32 emulation is not available when this feature
140           is enabled.
141
142 config SMP
143         bool "Symmetric Multi-Processing"
144         select USE_GENERIC_SMP_HELPERS
145         help
146           This enables support for systems with more than one CPU.  If
147           you say N here, the kernel will run on single and
148           multiprocessor machines, but will use only one CPU of a
149           multiprocessor machine. If you say Y here, the kernel will run
150           on many, but not all, single processor machines. On a single
151           processor machine, the kernel will run faster if you say N
152           here.
153
154           If you don't know what to do here, say N.
155
156 config NR_CPUS
157         int "Maximum number of CPUs (2-32)"
158         range 2 32
159         depends on SMP
160         # These have to remain sorted largest to smallest
161         default "8" if ARCH_XGENE
162         default "4"
163
164 config HOTPLUG_CPU
165         bool "Support for hot-pluggable CPUs"
166         depends on SMP
167         help
168           Say Y here to experiment with turning CPUs off and on.  CPUs
169           can be controlled through /sys/devices/system/cpu.
170
171 source kernel/Kconfig.preempt
172
173 config HZ
174         int
175         default 100
176
177 config ARCH_HAS_HOLES_MEMORYMODEL
178         def_bool y if SPARSEMEM
179
180 config ARCH_SPARSEMEM_ENABLE
181         def_bool y
182         select SPARSEMEM_VMEMMAP_ENABLE
183
184 config ARCH_SPARSEMEM_DEFAULT
185         def_bool ARCH_SPARSEMEM_ENABLE
186
187 config ARCH_SELECT_MEMORY_MODEL
188         def_bool ARCH_SPARSEMEM_ENABLE
189
190 config HAVE_ARCH_PFN_VALID
191         def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
192
193 config HW_PERF_EVENTS
194         bool "Enable hardware performance counter support for perf events"
195         depends on PERF_EVENTS
196         default y
197         help
198           Enable hardware performance counter support for perf events. If
199           disabled, perf events will use software events only.
200
201 config SYS_SUPPORTS_HUGETLBFS
202         def_bool y
203
204 config ARCH_WANT_GENERAL_HUGETLB
205         def_bool y
206
207 config ARCH_WANT_HUGE_PMD_SHARE
208         def_bool y if !ARM64_64K_PAGES
209
210 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
211         def_bool y
212
213 source "mm/Kconfig"
214
215 config XEN_DOM0
216         def_bool y
217         depends on XEN
218
219 config XEN
220         bool "Xen guest support on ARM64 (EXPERIMENTAL)"
221         depends on ARM64 && OF
222         help
223           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
224
225 config FORCE_MAX_ZONEORDER
226         int
227         default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
228         default "11"
229
230 endmenu
231
232 menu "Boot options"
233
234 config CMDLINE
235         string "Default kernel command string"
236         default ""
237         help
238           Provide a set of default command-line options at build time by
239           entering them here. As a minimum, you should specify the the
240           root device (e.g. root=/dev/nfs).
241
242 config CMDLINE_FORCE
243         bool "Always use the default kernel command string"
244         help
245           Always use the default kernel command string, even if the boot
246           loader passes other arguments to the kernel.
247           This is useful if you cannot or don't want to change the
248           command-line options your boot loader passes to the kernel.
249
250 endmenu
251
252 menu "Userspace binary formats"
253
254 source "fs/Kconfig.binfmt"
255
256 config COMPAT
257         bool "Kernel support for 32-bit EL0"
258         depends on !ARM64_64K_PAGES
259         select COMPAT_BINFMT_ELF
260         select HAVE_UID16
261         select OLD_SIGSUSPEND3
262         select COMPAT_OLD_SIGACTION
263         help
264           This option enables support for a 32-bit EL0 running under a 64-bit
265           kernel at EL1. AArch32-specific components such as system calls,
266           the user helper functions, VFP support and the ptrace interface are
267           handled appropriately by the kernel.
268
269           If you want to execute 32-bit userspace applications, say Y.
270
271 config SYSVIPC_COMPAT
272         def_bool y
273         depends on COMPAT && SYSVIPC
274
275 endmenu
276
277 source "net/Kconfig"
278
279 source "drivers/Kconfig"
280
281 source "fs/Kconfig"
282
283 source "arch/arm64/kvm/Kconfig"
284
285 source "arch/arm64/Kconfig.debug"
286
287 source "security/Kconfig"
288
289 source "crypto/Kconfig"
290
291 source "lib/Kconfig"