2 * arch/arm/mach-omap2/serial.c
4 * OMAP2 serial support.
6 * Copyright (C) 2005-2008 Nokia Corporation
7 * Author: Paul Mundt <paul.mundt@nokia.com>
9 * Major rework for PM support by Kevin Hilman
11 * Based off of arch/arm/mach-omap/omap1/serial.c
13 * Copyright (C) 2009 Texas Instruments
14 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
16 * This file is subject to the terms and conditions of the GNU General Public
17 * License. See the file "COPYING" in the main directory of this archive
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/clk.h>
24 #include <linux/delay.h>
25 #include <linux/platform_device.h>
26 #include <linux/slab.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/console.h>
30 #include <plat/omap-serial.h>
32 #include <plat/board.h>
34 #include <plat/omap_hwmod.h>
35 #include <plat/omap_device.h>
36 #include <plat/omap-pm.h>
38 #include "prm2xxx_3xxx.h"
40 #include "cm2xxx_3xxx.h"
41 #include "prm-regbits-34xx.h"
46 * NOTE: By default the serial auto_suspend timeout is disabled as it causes
47 * lost characters over the serial ports. This means that the UART clocks will
48 * stay on until power/autosuspend_delay is set for the uart from sysfs.
49 * This also causes that any deeper omap sleep states are blocked.
51 #define DEFAULT_AUTOSUSPEND_DELAY -1
53 #define MAX_UART_HWMOD_NAME_LEN 16
55 struct omap_uart_state {
58 struct list_head node;
59 struct omap_hwmod *oh;
62 static LIST_HEAD(uart_list);
64 static u8 console_uart_id = -1;
65 static u8 no_console_suspend;
68 #define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */
69 #define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */
70 #define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */
72 static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
75 .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
76 .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
77 .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
78 .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
83 static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
85 struct omap_device *od = to_omap_device(pdev);
91 omap_hwmod_enable_wakeup(od->hwmods[0]);
93 omap_hwmod_disable_wakeup(od->hwmods[0]);
97 * Errata i291: [UART]:Cannot Acknowledge Idle Requests
98 * in Smartidle Mode When Configured for DMA Operations.
99 * WA: configure uart in force idle mode.
101 static void omap_uart_set_noidle(struct platform_device *pdev)
103 struct omap_device *od = to_omap_device(pdev);
105 omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
108 static void omap_uart_set_smartidle(struct platform_device *pdev)
110 struct omap_device *od = to_omap_device(pdev);
112 omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
116 static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
118 static void omap_uart_set_noidle(struct platform_device *pdev) {}
119 static void omap_uart_set_smartidle(struct platform_device *pdev) {}
120 #endif /* CONFIG_PM */
122 #ifdef CONFIG_OMAP_MUX
123 static struct omap_device_pad default_uart1_pads[] __initdata = {
125 .name = "uart1_cts.uart1_cts",
126 .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
129 .name = "uart1_rts.uart1_rts",
130 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
133 .name = "uart1_tx.uart1_tx",
134 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
137 .name = "uart1_rx.uart1_rx",
138 .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
139 .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
140 .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
144 static struct omap_device_pad default_uart2_pads[] __initdata = {
146 .name = "uart2_cts.uart2_cts",
147 .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
150 .name = "uart2_rts.uart2_rts",
151 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
154 .name = "uart2_tx.uart2_tx",
155 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
158 .name = "uart2_rx.uart2_rx",
159 .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
160 .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
161 .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
165 static struct omap_device_pad default_uart3_pads[] __initdata = {
167 .name = "uart3_cts_rctx.uart3_cts_rctx",
168 .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
171 .name = "uart3_rts_sd.uart3_rts_sd",
172 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
175 .name = "uart3_tx_irtx.uart3_tx_irtx",
176 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
179 .name = "uart3_rx_irrx.uart3_rx_irrx",
180 .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
181 .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
182 .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
186 static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
188 .name = "gpmc_wait2.uart4_tx",
189 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
192 .name = "gpmc_wait3.uart4_rx",
193 .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
194 .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
195 .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
199 static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
201 .name = "uart4_tx.uart4_tx",
202 .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
205 .name = "uart4_rx.uart4_rx",
206 .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
207 .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
208 .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
212 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
216 bdata->pads = default_uart1_pads;
217 bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
220 bdata->pads = default_uart2_pads;
221 bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
224 bdata->pads = default_uart3_pads;
225 bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
228 if (cpu_is_omap44xx()) {
229 bdata->pads = default_omap4_uart4_pads;
231 ARRAY_SIZE(default_omap4_uart4_pads);
232 } else if (cpu_is_omap3630()) {
233 bdata->pads = default_omap36xx_uart4_pads;
235 ARRAY_SIZE(default_omap36xx_uart4_pads);
243 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
246 char *cmdline_find_option(char *str)
248 extern char *saved_command_line;
250 return strstr(saved_command_line, str);
253 static int __init omap_serial_early_init(void)
256 char oh_name[MAX_UART_HWMOD_NAME_LEN];
257 struct omap_hwmod *oh;
258 struct omap_uart_state *uart;
259 char uart_name[MAX_UART_HWMOD_NAME_LEN];
261 snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
262 "uart%d", num_uarts + 1);
263 oh = omap_hwmod_lookup(oh_name);
267 uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
272 uart->num = num_uarts++;
273 list_add_tail(&uart->node, &uart_list);
274 snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
275 "%s%d", OMAP_SERIAL_NAME, uart->num);
277 if (cmdline_find_option(uart_name)) {
278 console_uart_id = uart->num;
280 if (console_loglevel >= 10) {
282 pr_info("%s used as console in debug mode"
283 " uart%d clocks will not be"
284 " gated", uart_name, uart->num);
287 if (cmdline_find_option("no_console_suspend"))
288 no_console_suspend = true;
291 * omap-uart can be used for earlyprintk logs
292 * So if omap-uart is used as console then prevent
293 * uart reset and idle to get logs from omap-uart
294 * until uart console driver is available to take
295 * care for console messages.
296 * Idling or resetting omap-uart while printing logs
297 * early boot logs can stall the boot-up.
299 oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
305 core_initcall(omap_serial_early_init);
308 * omap_serial_init_port() - initialize single serial port
309 * @bdata: port specific board data pointer
310 * @info: platform specific data pointer
312 * This function initialies serial driver for given port only.
313 * Platforms can call this function instead of omap_serial_init()
314 * if they don't plan to use all available UARTs as serial ports.
316 * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
317 * use only one of the two.
319 void __init omap_serial_init_port(struct omap_board_data *bdata,
320 struct omap_uart_port_info *info)
322 struct omap_uart_state *uart;
323 struct omap_hwmod *oh;
324 struct platform_device *pdev;
328 struct omap_uart_port_info omap_up;
332 if (WARN_ON(bdata->id < 0))
334 if (WARN_ON(bdata->id >= num_uarts))
337 list_for_each_entry(uart, &uart_list, node)
338 if (bdata->id == uart->num)
341 info = omap_serial_default_info;
346 omap_up.dma_enabled = info->dma_enabled;
347 omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
348 omap_up.flags = UPF_BOOT_AUTOCONF;
349 omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
350 omap_up.set_forceidle = omap_uart_set_smartidle;
351 omap_up.set_noidle = omap_uart_set_noidle;
352 omap_up.enable_wakeup = omap_uart_enable_wakeup;
353 omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
354 omap_up.dma_rx_timeout = info->dma_rx_timeout;
355 omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
356 omap_up.autosuspend_timeout = info->autosuspend_timeout;
358 /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
359 if (!cpu_is_omap2420() && !cpu_is_ti816x())
360 omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
362 /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
363 if (cpu_is_omap34xx() || cpu_is_omap3630())
364 omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
367 pdata_size = sizeof(struct omap_uart_port_info);
372 pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
374 WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
377 if ((console_uart_id == bdata->id) && no_console_suspend)
378 omap_device_disable_idle_on_suspend(pdev);
380 oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
384 if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
386 device_init_wakeup(&pdev->dev, true);
390 * omap_serial_board_init() - initialize all supported serial ports
391 * @info: platform specific data pointer
393 * Initializes all available UARTs as serial ports. Platforms
394 * can call this function when they want to have default behaviour
395 * for serial ports (e.g initialize them all as serial ports).
397 void __init omap_serial_board_init(struct omap_uart_port_info *info)
399 struct omap_uart_state *uart;
400 struct omap_board_data bdata;
402 list_for_each_entry(uart, &uart_list, node) {
403 bdata.id = uart->num;
408 if (cpu_is_omap44xx() || cpu_is_omap34xx())
409 omap_serial_fill_default_pads(&bdata);
412 omap_serial_init_port(&bdata, NULL);
414 omap_serial_init_port(&bdata, &info[uart->num]);
419 * omap_serial_init() - initialize all supported serial ports
421 * Initializes all available UARTs.
422 * Platforms can call this function when they want to have default behaviour
423 * for serial ports (e.g initialize them all as serial ports).
425 void __init omap_serial_init(void)
427 omap_serial_board_init(NULL);