arch/arm/mach-omap2/Makefile

   1 #
   2 # Makefile for the linux kernel.
   3 #
   4
   5 # Common support
   6 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
   7          common.o gpio.o dma.o wd_timer.o
   8
   9 omap-2-3-common                         = irq.o sdrc.o
  10 hwmod-common                            = omap_hwmod.o \
  11                                           omap_hwmod_common_data.o
  12 clock-common                            = clock.o clock_common_data.o \
  13                                           clkt_dpll.o clkt_clksel.o
  14
  15 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
  16 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
  17 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
  18
  19 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
  20
  21 # SMP support ONLY available for OMAP4
  22 obj-$(CONFIG_SMP)                       += omap-smp.o omap-headsmp.o
  23 obj-$(CONFIG_LOCAL_TIMERS)              += timer-mpu.o
  24 obj-$(CONFIG_HOTPLUG_CPU)               += omap-hotplug.o
  25 obj-$(CONFIG_ARCH_OMAP4)                += omap44xx-smc.o omap4-common.o
  26
  27 plus_sec := $(call as-instr,.arch_extension sec,+sec)
  28 AFLAGS_omap-headsmp.o                   :=-Wa,-march=armv7-a$(plus_sec)
  29 AFLAGS_omap44xx-smc.o                   :=-Wa,-march=armv7-a$(plus_sec)
  30
  31 # Functions loaded to SRAM
  32 obj-$(CONFIG_ARCH_OMAP2420)             += sram242x.o
  33 obj-$(CONFIG_ARCH_OMAP2430)             += sram243x.o
  34 obj-$(CONFIG_ARCH_OMAP3)                += sram34xx.o
  35
  36 AFLAGS_sram242x.o                       :=-Wa,-march=armv6
  37 AFLAGS_sram243x.o                       :=-Wa,-march=armv6
  38 AFLAGS_sram34xx.o                       :=-Wa,-march=armv7-a
  39
  40 # Pin multiplexing
  41 obj-$(CONFIG_ARCH_OMAP2420)             += mux2420.o
  42 obj-$(CONFIG_ARCH_OMAP2430)             += mux2430.o
  43 obj-$(CONFIG_ARCH_OMAP3)                += mux34xx.o
  44 obj-$(CONFIG_ARCH_OMAP4)                += mux44xx.o
  45
  46 # SMS/SDRC
  47 obj-$(CONFIG_ARCH_OMAP2)                += sdrc2xxx.o
  48 # obj-$(CONFIG_ARCH_OMAP3)              += sdrc3xxx.o
  49
  50 # OPP table initialization
  51 ifeq ($(CONFIG_PM_OPP),y)
  52 obj-y                                   += opp.o
  53 obj-$(CONFIG_ARCH_OMAP3)                += opp3xxx_data.o
  54 obj-$(CONFIG_ARCH_OMAP4)                += opp4xxx_data.o
  55 endif
  56
  57 # Power Management
  58 ifeq ($(CONFIG_PM),y)
  59 obj-$(CONFIG_ARCH_OMAP2)                += pm24xx.o
  60 obj-$(CONFIG_ARCH_OMAP2)                += sleep24xx.o pm_bus.o voltage.o
  61 obj-$(CONFIG_ARCH_OMAP3)                += pm34xx.o sleep34xx.o voltage.o \
  62                                            cpuidle34xx.o pm_bus.o
  63 obj-$(CONFIG_ARCH_OMAP4)                += pm44xx.o pm_bus.o
  64 obj-$(CONFIG_PM_DEBUG)                  += pm-debug.o
  65 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
  66 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)   += smartreflex-class3.o
  67
  68 AFLAGS_sleep24xx.o                      :=-Wa,-march=armv6
  69 AFLAGS_sleep34xx.o                      :=-Wa,-march=armv7-a
  70
  71 ifeq ($(CONFIG_PM_VERBOSE),y)
  72 CFLAGS_pm_bus.o                         += -DDEBUG
  73 endif
  74
  75 endif
  76
  77 # PRCM
  78 obj-$(CONFIG_ARCH_OMAP2)                += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
  79 obj-$(CONFIG_ARCH_OMAP3)                += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
  80 # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
  81 # will be removed once the OMAP4 part of the codebase is converted to
  82 # use OMAP4-specific PRCM functions.
  83 obj-$(CONFIG_ARCH_OMAP4)                += prcm.o cm2xxx_3xxx.o cminst44xx.o \
  84                                            cm44xx.o prcm_mpu44xx.o \
  85                                            prminst44xx.o
  86
  87 # OMAP powerdomain framework
  88 powerdomain-common                      += powerdomain.o powerdomain-common.o
  89 obj-$(CONFIG_ARCH_OMAP2)                += $(powerdomain-common) \
  90                                            powerdomain2xxx_3xxx.o \
  91                                            powerdomains2xxx_data.o \
  92                                            powerdomains2xxx_3xxx_data.o
  93 obj-$(CONFIG_ARCH_OMAP3)                += $(powerdomain-common) \
  94                                            powerdomain2xxx_3xxx.o \
  95                                            powerdomains3xxx_data.o \
  96                                            powerdomains2xxx_3xxx_data.o
  97 obj-$(CONFIG_ARCH_OMAP4)                += $(powerdomain-common) \
  98                                            powerdomain44xx.o \
  99                                            powerdomains44xx_data.o
 100
 101 # PRCM clockdomain control
 102 obj-$(CONFIG_ARCH_OMAP2)                += clockdomain.o \
 103                                            clockdomains2xxx_3xxx_data.o
 104 obj-$(CONFIG_ARCH_OMAP3)                += clockdomain.o \
 105                                            clockdomains2xxx_3xxx_data.o
 106 obj-$(CONFIG_ARCH_OMAP4)                += clockdomain.o \
 107                                            clockdomains44xx_data.o
 108 # Clock framework
 109 obj-$(CONFIG_ARCH_OMAP2)                += $(clock-common) clock2xxx.o \
 110                                            clkt2xxx_sys.o \
 111                                            clkt2xxx_dpllcore.o \
 112                                            clkt2xxx_virt_prcm_set.o \
 113                                            clkt2xxx_apll.o clkt2xxx_osc.o
 114 obj-$(CONFIG_ARCH_OMAP2420)             += clock2420_data.o
 115 obj-$(CONFIG_ARCH_OMAP2430)             += clock2430.o clock2430_data.o
 116 obj-$(CONFIG_ARCH_OMAP3)                += $(clock-common) clock3xxx.o \
 117                                            clock34xx.o clkt34xx_dpll3m2.o \
 118                                            clock3517.o clock36xx.o \
 119                                            dpll3xxx.o clock3xxx_data.o
 120 obj-$(CONFIG_ARCH_OMAP4)                += $(clock-common) clock44xx_data.o \
 121                                            dpll3xxx.o
 122
 123 # OMAP2 clock rate set data (old "OPP" data)
 124 obj-$(CONFIG_ARCH_OMAP2420)             += opp2420_data.o
 125 obj-$(CONFIG_ARCH_OMAP2430)             += opp2430_data.o
 126
 127 # hwmod data
 128 obj-$(CONFIG_ARCH_OMAP2420)             += omap_hwmod_2420_data.o
 129 obj-$(CONFIG_ARCH_OMAP2430)             += omap_hwmod_2430_data.o
 130 obj-$(CONFIG_ARCH_OMAP3)                += omap_hwmod_3xxx_data.o
 131 obj-$(CONFIG_ARCH_OMAP4)                += omap_hwmod_44xx_data.o
 132
 133 # EMU peripherals
 134 obj-$(CONFIG_OMAP3_EMU)                 += emu.o
 135
 136 obj-$(CONFIG_OMAP_MBOX_FWK)             += mailbox_mach.o
 137 mailbox_mach-objs                       := mailbox.o
 138
 139 obj-$(CONFIG_OMAP_IOMMU)                += iommu2.o
 140
 141 iommu-$(CONFIG_OMAP_IOMMU)              := omap-iommu.o
 142 obj-y                                   += $(iommu-m) $(iommu-y)
 143
 144 i2c-omap-$(CONFIG_I2C_OMAP)             := i2c.o
 145 obj-y                                   += $(i2c-omap-m) $(i2c-omap-y)
 146
 147 ifneq ($(CONFIG_TIDSPBRIDGE),)
 148 obj-y                                   += dsp.o
 149 endif
 150
 151 # Specific board support
 152 obj-$(CONFIG_MACH_OMAP_GENERIC)         += board-generic.o
 153 obj-$(CONFIG_MACH_OMAP_H4)              += board-h4.o
 154 obj-$(CONFIG_MACH_OMAP_2430SDP)         += board-2430sdp.o \
 155                                            hsmmc.o
 156 obj-$(CONFIG_MACH_OMAP_APOLLON)         += board-apollon.o
 157 obj-$(CONFIG_MACH_OMAP3_BEAGLE)         += board-omap3beagle.o \
 158                                            hsmmc.o
 159 obj-$(CONFIG_MACH_DEVKIT8000)           += board-devkit8000.o \
 160                                            hsmmc.o
 161 obj-$(CONFIG_MACH_OMAP_LDP)             += board-ldp.o \
 162                                            board-flash.o \
 163                                            hsmmc.o
 164 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
 165                                            hsmmc.o
 166 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
 167                                            hsmmc.o
 168 obj-$(CONFIG_MACH_OVERO)                += board-overo.o \
 169                                            hsmmc.o
 170 obj-$(CONFIG_MACH_OMAP3EVM)             += board-omap3evm.o \
 171                                            hsmmc.o
 172 obj-$(CONFIG_MACH_OMAP3_PANDORA)        += board-omap3pandora.o \
 173                                            hsmmc.o
 174 obj-$(CONFIG_MACH_OMAP_3430SDP)         += board-3430sdp.o \
 175                                            hsmmc.o \
 176                                            board-flash.o
 177 obj-$(CONFIG_MACH_NOKIA_N8X0)           += board-n8x0.o
 178 obj-$(CONFIG_MACH_NOKIA_RM680)          += board-rm680.o \
 179                                            sdram-nokia.o \
 180                                            hsmmc.o
 181 obj-$(CONFIG_MACH_NOKIA_RX51)           += board-rx51.o \
 182                                            sdram-nokia.o \
 183                                            board-rx51-peripherals.o \
 184                                            board-rx51-video.o \
 185                                            hsmmc.o
 186 obj-$(CONFIG_MACH_OMAP_ZOOM2)           += board-zoom.o \
 187                                            board-zoom-peripherals.o \
 188                                            board-flash.o \
 189                                            hsmmc.o \
 190                                            board-zoom-debugboard.o
 191 obj-$(CONFIG_MACH_OMAP_ZOOM3)           += board-zoom.o \
 192                                            board-zoom-peripherals.o \
 193                                            board-flash.o \
 194                                            hsmmc.o \
 195                                            board-zoom-debugboard.o
 196 obj-$(CONFIG_MACH_OMAP_3630SDP)         += board-3630sdp.o \
 197                                            board-zoom-peripherals.o \
 198                                            board-flash.o \
 199                                            hsmmc.o
 200 obj-$(CONFIG_MACH_CM_T35)               += board-cm-t35.o \
 201                                            hsmmc.o
 202 obj-$(CONFIG_MACH_CM_T3517)             += board-cm-t3517.o
 203 obj-$(CONFIG_MACH_IGEP0020)             += board-igep0020.o \
 204                                            hsmmc.o
 205 obj-$(CONFIG_MACH_IGEP0030)             += board-igep0030.o \
 206                                            hsmmc.o
 207 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)      += board-omap3touchbook.o \
 208                                            hsmmc.o
 209 obj-$(CONFIG_MACH_OMAP_4430SDP)         += board-4430sdp.o \
 210                                            hsmmc.o
 211 obj-$(CONFIG_MACH_OMAP4_PANDA)          += board-omap4panda.o \
 212                                            hsmmc.o
 213
 214 obj-$(CONFIG_MACH_OMAP3517EVM)          += board-am3517evm.o
 215
 216 obj-$(CONFIG_MACH_CRANEBOARD)           += board-am3517crane.o
 217
 218 obj-$(CONFIG_MACH_SBC3530)              += board-omap3stalker.o \
 219                                            hsmmc.o
 220 # Platform specific device init code
 221 usbfs-$(CONFIG_ARCH_OMAP_OTG)           := usb-fs.o
 222 obj-y                                   += $(usbfs-m) $(usbfs-y)
 223 obj-y                                   += usb-musb.o
 224 obj-$(CONFIG_MACH_OMAP2_TUSB6010)       += usb-tusb6010.o
 225 obj-y                                   += usb-ehci.o
 226
 227 onenand-$(CONFIG_MTD_ONENAND_OMAP2)     := gpmc-onenand.o
 228 obj-y                                   += $(onenand-m) $(onenand-y)
 229
 230 nand-$(CONFIG_MTD_NAND_OMAP2)           := gpmc-nand.o
 231 obj-y                                   += $(nand-m) $(nand-y)
 232
 233 smc91x-$(CONFIG_SMC91X)                 := gpmc-smc91x.o
 234 obj-y                                   += $(smc91x-m) $(smc91x-y)
 235
 236 smsc911x-$(CONFIG_SMSC911X)             := gpmc-smsc911x.o
 237 obj-y                                   += $(smsc911x-m) $(smsc911x-y)