9 config ARCH_DAVINCI_DMx
12 menu "TI DaVinci Implementations"
14 comment "DaVinci Core Type"
16 config ARCH_DAVINCI_DM644x
17 bool "DaVinci 644x based system"
19 select ARCH_DAVINCI_DMx
21 config ARCH_DAVINCI_DM355
22 bool "DaVinci 355 based system"
24 select ARCH_DAVINCI_DMx
26 config ARCH_DAVINCI_DM646x
27 bool "DaVinci 646x based system"
29 select ARCH_DAVINCI_DMx
31 config ARCH_DAVINCI_DA830
32 bool "DA830/OMAP-L137 based system"
34 select ARCH_DAVINCI_DA8XX
35 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
37 config ARCH_DAVINCI_DA850
38 bool "DA850/OMAP-L138 based system"
40 select ARCH_DAVINCI_DA8XX
41 select ARCH_HAS_CPUFREQ
43 config ARCH_DAVINCI_DA8XX
46 config ARCH_DAVINCI_DM365
47 bool "DaVinci 365 based system"
49 select ARCH_DAVINCI_DMx
51 comment "DaVinci Board Type"
53 config MACH_DAVINCI_EVM
55 default ARCH_DAVINCI_DM644x
56 depends on ARCH_DAVINCI_DM644x
58 Configure this option to specify the whether the board used
59 for development is a DM644x EVM
63 depends on ARCH_DAVINCI_DM644x
65 Say Y here to select the Lyrtech Small Form Factor
66 Software Defined Radio (SFFSDR) board.
68 config MACH_DAVINCI_DM355_EVM
70 default ARCH_DAVINCI_DM355
71 depends on ARCH_DAVINCI_DM355
73 Configure this option to specify the whether the board used
74 for development is a DM355 EVM
76 config MACH_DM355_LEOPARD
77 bool "DM355 Leopard board"
78 depends on ARCH_DAVINCI_DM355
80 Configure this option to specify the whether the board used
81 for development is a DM355 Leopard board.
83 config MACH_DAVINCI_DM6467_EVM
85 default ARCH_DAVINCI_DM646x
86 depends on ARCH_DAVINCI_DM646x
88 Configure this option to specify the whether the board used
89 for development is a DM6467 EVM
91 config MACH_DAVINCI_DM365_EVM
93 default ARCH_DAVINCI_DM365
94 depends on ARCH_DAVINCI_DM365
96 Configure this option to specify whether the board used
97 for development is a DM365 EVM
99 config MACH_DAVINCI_DA830_EVM
100 bool "TI DA830/OMAP-L137 Reference Platform"
101 default ARCH_DAVINCI_DA830
102 depends on ARCH_DAVINCI_DA830
104 Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
107 bool "DA830/OMAP-L137 UI (User Interface) board support"
108 depends on MACH_DAVINCI_DA830_EVM
110 Say Y here if you have the DA830/OMAP-L137 UI
111 (User Interface) board installed and you want to
112 enable the peripherals located on User Interface
116 prompt "Select DA830/OMAP-L137 UI board peripheral"
122 Say Y here to use the LCD as a framebuffer or simple character
127 config MACH_DAVINCI_DA850_EVM
128 bool "TI DA850/OMAP-L138 Reference Platform"
129 default ARCH_DAVINCI_DA850
130 depends on ARCH_DAVINCI_DA850
132 Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
135 bool "DA850/OMAP-L138 UI (User Interface) board expander configuration"
136 depends on MACH_DAVINCI_DA850_EVM
139 Say Y here if you have the DA850/OMAP-L138 UI
140 (User Interface) board installed and you want to
141 enable the peripherals located on User Interface
142 board contorlled by TCA6416 expander.
145 prompt "Select peripherals connected to expander on UI board"
146 depends on DA850_UI_EXP
149 bool "No peripheral is enabled"
151 Say Y if you do not want to enable any of the peripherals connected
152 to TCA6416 expander on DA850/OMAP-L138 EVM UI card
155 bool "RMII Ethernet PHY"
157 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
158 This PHY is found on the UI daughter card that is supplied with
160 NOTE: Please take care while choosing this option, MII PHY will
161 not be functional if RMII mode is selected.
166 bool "DAVINCI multiplexing support"
167 depends on ARCH_DAVINCI
170 Pin multiplexing support for DAVINCI boards. If your bootloader
171 sets the multiplexing correctly, say N. Otherwise, or if unsure,
174 config DAVINCI_MUX_DEBUG
175 bool "Multiplexing debug output"
176 depends on DAVINCI_MUX
178 Makes the multiplexing functions print out a lot of debug info.
179 This is useful if you want to find out the correct values of the
180 multiplexing registers.
182 config DAVINCI_MUX_WARNINGS
183 bool "Warn about pins the bootloader didn't set up"
184 depends on DAVINCI_MUX
186 Choose Y here to warn whenever driver initialization logic needs
187 to change the pin multiplexing setup. When there are no warnings
188 printed, it's safe to deselect DAVINCI_MUX for your product.
190 config DAVINCI_RESET_CLOCKS
191 bool "Reset unused clocks during boot"
192 depends on ARCH_DAVINCI
194 Say Y if you want to reset unused clocks during boot.
195 This option saves power, but assumes all drivers are
196 using the clock framework. Broken drivers that do not
197 yet use clock framework may not work with this option.
198 If you are booting from another operating system, you
199 probably do not want this option enabled until your
200 device drivers work properly.