10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
36 select ARCH_DAVINCI_DA8XX
37 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
39 config ARCH_DAVINCI_DA850
40 bool "DA850/OMAP-L138/AM18x based system"
42 select ARCH_DAVINCI_DA8XX
43 select ARCH_HAS_CPUFREQ
45 config ARCH_DAVINCI_DA8XX
49 config ARCH_DAVINCI_DM365
50 bool "DaVinci 365 based system"
52 select ARCH_DAVINCI_DMx
54 config ARCH_DAVINCI_TNETV107X
57 bool "TNETV107X based system"
59 comment "DaVinci Board Type"
61 config MACH_DAVINCI_EVM
63 default ARCH_DAVINCI_DM644x
64 depends on ARCH_DAVINCI_DM644x
69 Configure this option to specify the whether the board used
70 for development is a DM644x EVM
74 depends on ARCH_DAVINCI_DM644x
79 Say Y here to select the Lyrtech Small Form Factor
80 Software Defined Radio (SFFSDR) board.
82 config MACH_NEUROS_OSD2
83 bool "Neuros OSD2 Open Television Set Top Box"
84 depends on ARCH_DAVINCI_DM644x
86 Configure this option to specify the whether the board used
87 for development is a Neuros OSD2 Open Set Top Box.
89 config MACH_DAVINCI_DM355_EVM
91 default ARCH_DAVINCI_DM355
92 depends on ARCH_DAVINCI_DM355
94 Configure this option to specify the whether the board used
95 for development is a DM355 EVM
97 config MACH_DM355_LEOPARD
98 bool "DM355 Leopard board"
99 depends on ARCH_DAVINCI_DM355
101 Configure this option to specify the whether the board used
102 for development is a DM355 Leopard board.
104 config MACH_DAVINCI_DM6467_EVM
106 default ARCH_DAVINCI_DM646x
107 depends on ARCH_DAVINCI_DM646x
108 select MACH_DAVINCI_DM6467TEVM
113 Configure this option to specify the whether the board used
114 for development is a DM6467 EVM
116 config MACH_DAVINCI_DM6467TEVM
119 config MACH_DAVINCI_DM365_EVM
121 default ARCH_DAVINCI_DM365
122 depends on ARCH_DAVINCI_DM365
127 Configure this option to specify whether the board used
128 for development is a DM365 EVM
130 config MACH_DAVINCI_DA830_EVM
131 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
132 default ARCH_DAVINCI_DA830
133 depends on ARCH_DAVINCI_DA830
139 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
142 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
143 depends on MACH_DAVINCI_DA830_EVM
145 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
146 detected automatically based on successful probe of the I2C
147 based GPIO expander on that board. This option selected in this
148 menu has an effect only in case of a successful UI card detection.
153 Say Y here to use the LCD as a framebuffer or simple character
159 Say Y here to use the NAND flash. Do not forget to setup
160 the switch correctly.
163 config MACH_DAVINCI_DA850_EVM
164 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
165 default ARCH_DAVINCI_DA850
166 depends on ARCH_DAVINCI_DA850
168 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
171 prompt "Select peripherals connected to expander on UI board"
172 depends on MACH_DAVINCI_DA850_EVM
174 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
175 EVM is detected automatically based on successful probe of the I2C
176 based GPIO expander on that card. This option selected in this
177 menu has an effect only in case of a successful UI card detection.
180 bool "No peripheral is enabled"
182 Say Y if you do not want to enable any of the peripherals connected
183 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
186 bool "RMII Ethernet PHY"
188 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
189 EVM. This PHY is found on the UI daughter card that is supplied with
191 NOTE: Please take care while choosing this option, MII PHY will
192 not be functional if RMII mode is selected.
197 bool "AM18x wl1271 daughter board"
198 depends on MACH_DAVINCI_DA850_EVM
200 The wl1271 daughter card for AM18x EVMs is a combo wireless
201 connectivity add-on card, based on the LS Research TiWi module with
202 Texas Instruments' wl1271 solution.
203 Say Y if you want to use a wl1271 expansion card connected to the
207 default MACH_DAVINCI_DA850_EVM
209 config KEYBOARD_GPIO_POLLED
210 default MACH_DAVINCI_DA850_EVM
212 config MACH_TNETV107X
213 bool "TI TNETV107X Reference Platform"
214 default ARCH_DAVINCI_TNETV107X
215 depends on ARCH_DAVINCI_TNETV107X
217 Say Y here to select the TI TNETV107X Evaluation Module.
219 config MACH_MITYOMAPL138
220 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
221 depends on ARCH_DAVINCI_DA850
226 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
227 System on Module. Information on this SoM may be found at
228 http://www.mitydsp.com
230 config MACH_OMAPL138_HAWKBOARD
231 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
232 depends on ARCH_DAVINCI_DA850
234 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
235 Information of this board may be found at
236 http://www.hawkboard.org/
239 bool "DAVINCI multiplexing support"
240 depends on ARCH_DAVINCI
243 Pin multiplexing support for DAVINCI boards. If your bootloader
244 sets the multiplexing correctly, say N. Otherwise, or if unsure,
247 config DAVINCI_MUX_DEBUG
248 bool "Multiplexing debug output"
249 depends on DAVINCI_MUX
251 Makes the multiplexing functions print out a lot of debug info.
252 This is useful if you want to find out the correct values of the
253 multiplexing registers.
255 config DAVINCI_MUX_WARNINGS
256 bool "Warn about pins the bootloader didn't set up"
257 depends on DAVINCI_MUX
259 Choose Y here to warn whenever driver initialization logic needs
260 to change the pin multiplexing setup. When there are no warnings
261 printed, it's safe to deselect DAVINCI_MUX for your product.
263 config DAVINCI_RESET_CLOCKS
264 bool "Reset unused clocks during boot"
265 depends on ARCH_DAVINCI
267 Say Y if you want to reset unused clocks during boot.
268 This option saves power, but assumes all drivers are
269 using the clock framework. Broken drivers that do not
270 yet use clock framework may not work with this option.
271 If you are booting from another operating system, you
272 probably do not want this option enabled until your
273 device drivers work properly.