Merge tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba...
[linux-2.6-block.git] / arch / arm / mach-bcm / platsmp-brcmstb.c
1 /*
2  * Broadcom STB CPU SMP and hotplug support for ARM
3  *
4  * Copyright (C) 2013-2014 Broadcom Corporation
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation version 2.
9  *
10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11  * kind, whether express or implied; without even the implied warranty
12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15
16 #include <linux/delay.h>
17 #include <linux/errno.h>
18 #include <linux/init.h>
19 #include <linux/io.h>
20 #include <linux/jiffies.h>
21 #include <linux/of_address.h>
22 #include <linux/of_platform.h>
23 #include <linux/printk.h>
24 #include <linux/regmap.h>
25 #include <linux/smp.h>
26 #include <linux/mfd/syscon.h>
27
28 #include <asm/cacheflush.h>
29 #include <asm/cp15.h>
30 #include <asm/mach-types.h>
31 #include <asm/smp_plat.h>
32
33 enum {
34         ZONE_MAN_CLKEN_MASK             = BIT(0),
35         ZONE_MAN_RESET_CNTL_MASK        = BIT(1),
36         ZONE_MAN_MEM_PWR_MASK           = BIT(4),
37         ZONE_RESERVED_1_MASK            = BIT(5),
38         ZONE_MAN_ISO_CNTL_MASK          = BIT(6),
39         ZONE_MANUAL_CONTROL_MASK        = BIT(7),
40         ZONE_PWR_DN_REQ_MASK            = BIT(9),
41         ZONE_PWR_UP_REQ_MASK            = BIT(10),
42         ZONE_BLK_RST_ASSERT_MASK        = BIT(12),
43         ZONE_PWR_OFF_STATE_MASK         = BIT(25),
44         ZONE_PWR_ON_STATE_MASK          = BIT(26),
45         ZONE_DPG_PWR_STATE_MASK         = BIT(28),
46         ZONE_MEM_PWR_STATE_MASK         = BIT(29),
47         ZONE_RESET_STATE_MASK           = BIT(31),
48         CPU0_PWR_ZONE_CTRL_REG          = 1,
49         CPU_RESET_CONFIG_REG            = 2,
50 };
51
52 static void __iomem *cpubiuctrl_block;
53 static void __iomem *hif_cont_block;
54 static u32 cpu0_pwr_zone_ctrl_reg;
55 static u32 cpu_rst_cfg_reg;
56 static u32 hif_cont_reg;
57
58 #ifdef CONFIG_HOTPLUG_CPU
59 /*
60  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
61  * one or more cache may be disabled, we must flush to ensure coherency. We
62  * cannot use traditionl completion structures or spinlocks as they rely on
63  * coherency.
64  */
65 static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
66
67 static int per_cpu_sw_state_rd(u32 cpu)
68 {
69         sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
70         return per_cpu(per_cpu_sw_state, cpu);
71 }
72
73 static void per_cpu_sw_state_wr(u32 cpu, int val)
74 {
75         dmb();
76         per_cpu(per_cpu_sw_state, cpu) = val;
77         sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
78 }
79 #else
80 static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
81 #endif
82
83 static void __iomem *pwr_ctrl_get_base(u32 cpu)
84 {
85         void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
86         base += (cpu_logical_map(cpu) * 4);
87         return base;
88 }
89
90 static u32 pwr_ctrl_rd(u32 cpu)
91 {
92         void __iomem *base = pwr_ctrl_get_base(cpu);
93         return readl_relaxed(base);
94 }
95
96 static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
97 {
98         void __iomem *base = pwr_ctrl_get_base(cpu);
99         writel((readl(base) & mask) | val, base);
100 }
101
102 static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
103 {
104         void __iomem *base = pwr_ctrl_get_base(cpu);
105         writel((readl(base) & mask) & ~val, base);
106 }
107
108 #define POLL_TMOUT_MS 500
109 static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
110 {
111         const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
112         u32 tmp;
113
114         do {
115                 tmp = pwr_ctrl_rd(cpu) & mask;
116                 if (!set == !tmp)
117                         return 0;
118         } while (time_before(jiffies, timeo));
119
120         tmp = pwr_ctrl_rd(cpu) & mask;
121         if (!set == !tmp)
122                 return 0;
123
124         return -ETIMEDOUT;
125 }
126
127 static void cpu_rst_cfg_set(u32 cpu, int set)
128 {
129         u32 val;
130         val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
131         if (set)
132                 val |= BIT(cpu_logical_map(cpu));
133         else
134                 val &= ~BIT(cpu_logical_map(cpu));
135         writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
136 }
137
138 static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
139 {
140         const int reg_ofs = cpu_logical_map(cpu) * 8;
141         writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
142         writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
143 }
144
145 static void brcmstb_cpu_boot(u32 cpu)
146 {
147         /* Mark this CPU as "up" */
148         per_cpu_sw_state_wr(cpu, 1);
149
150         /*
151          * Set the reset vector to point to the secondary_startup
152          * routine
153          */
154         cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));
155
156         /* Unhalt the cpu */
157         cpu_rst_cfg_set(cpu, 0);
158 }
159
160 static void brcmstb_cpu_power_on(u32 cpu)
161 {
162         /*
163          * The secondary cores power was cut, so we must go through
164          * power-on initialization.
165          */
166         pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
167         pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
168         pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);
169
170         pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
171
172         if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
173                 panic("ZONE_MEM_PWR_STATE_MASK set timeout");
174
175         pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);
176
177         if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
178                 panic("ZONE_DPG_PWR_STATE_MASK set timeout");
179
180         pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
181         pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
182 }
183
184 static int brcmstb_cpu_get_power_state(u32 cpu)
185 {
186         int tmp = pwr_ctrl_rd(cpu);
187         return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
188 }
189
190 #ifdef CONFIG_HOTPLUG_CPU
191
192 static void brcmstb_cpu_die(u32 cpu)
193 {
194         v7_exit_coherency_flush(all);
195
196         per_cpu_sw_state_wr(cpu, 0);
197
198         /* Sit and wait to die */
199         wfi();
200
201         /* We should never get here... */
202         while (1)
203                 ;
204 }
205
206 static int brcmstb_cpu_kill(u32 cpu)
207 {
208         /*
209          * Ordinarily, the hardware forbids power-down of CPU0 (which is good
210          * because it is the boot CPU), but this is not true when using BPCM
211          * manual mode.  Consequently, we must avoid turning off CPU0 here to
212          * ensure that TI2C master reset will work.
213          */
214         if (cpu == 0) {
215                 pr_warn("SMP: refusing to power off CPU0\n");
216                 return 1;
217         }
218
219         while (per_cpu_sw_state_rd(cpu))
220                 ;
221
222         pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
223         pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
224         pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
225         pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
226         pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
227
228         if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
229                 panic("ZONE_MEM_PWR_STATE_MASK clear timeout");
230
231         pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);
232
233         if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
234                 panic("ZONE_DPG_PWR_STATE_MASK clear timeout");
235
236         /* Flush pipeline before resetting CPU */
237         mb();
238
239         /* Assert reset on the CPU */
240         cpu_rst_cfg_set(cpu, 1);
241
242         return 1;
243 }
244
245 #endif /* CONFIG_HOTPLUG_CPU */
246
247 static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
248 {
249         int rc = 0;
250         char *name;
251         struct device_node *syscon_np = NULL;
252
253         name = "syscon-cpu";
254
255         syscon_np = of_parse_phandle(np, name, 0);
256         if (!syscon_np) {
257                 pr_err("can't find phandle %s\n", name);
258                 rc = -EINVAL;
259                 goto cleanup;
260         }
261
262         cpubiuctrl_block = of_iomap(syscon_np, 0);
263         if (!cpubiuctrl_block) {
264                 pr_err("iomap failed for cpubiuctrl_block\n");
265                 rc = -EINVAL;
266                 goto cleanup;
267         }
268
269         rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
270                                         &cpu0_pwr_zone_ctrl_reg);
271         if (rc) {
272                 pr_err("failed to read 1st entry from %s property (%d)\n", name,
273                         rc);
274                 rc = -EINVAL;
275                 goto cleanup;
276         }
277
278         rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
279                                         &cpu_rst_cfg_reg);
280         if (rc) {
281                 pr_err("failed to read 2nd entry from %s property (%d)\n", name,
282                         rc);
283                 rc = -EINVAL;
284                 goto cleanup;
285         }
286
287 cleanup:
288         of_node_put(syscon_np);
289         return rc;
290 }
291
292 static int __init setup_hifcont_regs(struct device_node *np)
293 {
294         int rc = 0;
295         char *name;
296         struct device_node *syscon_np = NULL;
297
298         name = "syscon-cont";
299
300         syscon_np = of_parse_phandle(np, name, 0);
301         if (!syscon_np) {
302                 pr_err("can't find phandle %s\n", name);
303                 rc = -EINVAL;
304                 goto cleanup;
305         }
306
307         hif_cont_block = of_iomap(syscon_np, 0);
308         if (!hif_cont_block) {
309                 pr_err("iomap failed for hif_cont_block\n");
310                 rc = -EINVAL;
311                 goto cleanup;
312         }
313
314         /* Offset is at top of hif_cont_block */
315         hif_cont_reg = 0;
316
317 cleanup:
318         of_node_put(syscon_np);
319         return rc;
320 }
321
322 static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
323 {
324         int rc;
325         struct device_node *np;
326         char *name;
327
328         name = "brcm,brcmstb-smpboot";
329         np = of_find_compatible_node(NULL, NULL, name);
330         if (!np) {
331                 pr_err("can't find compatible node %s\n", name);
332                 return;
333         }
334
335         rc = setup_hifcpubiuctrl_regs(np);
336         if (rc)
337                 return;
338
339         rc = setup_hifcont_regs(np);
340         if (rc)
341                 return;
342 }
343
344 static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
345 {
346         /* Missing the brcm,brcmstb-smpboot DT node? */
347         if (!cpubiuctrl_block || !hif_cont_block)
348                 return -ENODEV;
349
350         /* Bring up power to the core if necessary */
351         if (brcmstb_cpu_get_power_state(cpu) == 0)
352                 brcmstb_cpu_power_on(cpu);
353
354         brcmstb_cpu_boot(cpu);
355
356         return 0;
357 }
358
359 static struct smp_operations brcmstb_smp_ops __initdata = {
360         .smp_prepare_cpus       = brcmstb_cpu_ctrl_setup,
361         .smp_boot_secondary     = brcmstb_boot_secondary,
362 #ifdef CONFIG_HOTPLUG_CPU
363         .cpu_kill               = brcmstb_cpu_kill,
364         .cpu_die                = brcmstb_cpu_die,
365 #endif
366 };
367
368 CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);