3 menu "Atmel AT91 System-on-Chip"
6 prompt "Atmel AT91 Processor"
11 config ARCH_AT91SAM9260
14 config ARCH_AT91SAM9261
17 config ARCH_AT91SAM9263
22 # ----------------------------------------------------------
26 comment "AT91RM9200 Board Type"
29 bool "Ajeco 1ARM Single Board Computer"
30 depends on ARCH_AT91RM9200
32 Select this if you are using Ajeco's 1ARM Single Board Computer.
33 <http://www.ajeco.fi/products.htm>
35 config ARCH_AT91RM9200DK
36 bool "Atmel AT91RM9200-DK Development board"
37 depends on ARCH_AT91RM9200
39 Select this if you are using Atmel's AT91RM9200-DK Development board.
42 config MACH_AT91RM9200EK
43 bool "Atmel AT91RM9200-EK Evaluation Kit"
44 depends on ARCH_AT91RM9200
46 Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
47 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
51 depends on ARCH_AT91RM9200
53 Select this if you are using Cogent's CSB337 board.
54 <http://www.cogcomp.com/csb_csb337.htm>
58 depends on ARCH_AT91RM9200
60 Select this if you are using Cogent's CSB637 board.
61 <http://www.cogcomp.com/csb_csb637.htm>
64 bool "Conitec ARM&EVA"
65 depends on ARCH_AT91RM9200
67 Select this if you are using Conitec's AT91RM9200-MCU-Module.
68 <http://www.conitec.net/english/linuxboard.htm>
71 bool "Embest ATEB9200"
72 depends on ARCH_AT91RM9200
74 Select this if you are using Embest's ATEB9200 board.
75 <http://www.embedinfo.com/english/product/ATEB9200.asp>
78 bool "KwikByte KB920x"
79 depends on ARCH_AT91RM9200
81 Select this if you are using KwikByte's KB920x board.
82 <http://kwikbyte.com/KB9202_description_new.htm>
85 bool "Sperry-Sun KAFA board"
86 depends on ARCH_AT91RM9200
88 Select this if you are using Sperry-Sun's KAFA board.
92 # ----------------------------------------------------------
96 comment "AT91SAM9260 Board Type"
98 config MACH_AT91SAM9260EK
99 bool "Atmel AT91SAM9260-EK Evaluation Kit"
100 depends on ARCH_AT91SAM9260
102 Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
103 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
107 # ----------------------------------------------------------
111 comment "AT91SAM9261 Board Type"
113 config MACH_AT91SAM9261EK
114 bool "Atmel AT91SAM9261-EK Evaluation Kit"
115 depends on ARCH_AT91SAM9261
117 Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
118 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
122 # ----------------------------------------------------------
126 comment "AT91SAM9263 Board Type"
128 config MACH_AT91SAM9263EK
129 bool "Atmel AT91SAM9263-EK Evaluation Kit"
130 depends on ARCH_AT91SAM9263
132 Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
133 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
137 # ----------------------------------------------------------
139 comment "AT91 Board Options"
141 config MTD_AT91_DATAFLASH_CARD
142 bool "Enable DataFlash Card support"
143 depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
145 Enable support for the DataFlash card.
147 config MTD_NAND_AT91_BUSWIDTH_16
148 bool "Enable 16-bit data bus interface to NAND flash"
149 depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
151 On AT91SAM926x boards both types of NAND flash can be present
152 (8 and 16 bit data bus width).
154 # ----------------------------------------------------------
156 comment "AT91 Feature Selections"
158 config AT91_PROGRAMMABLE_CLOCKS
159 bool "Programmable Clocks"
161 Select this if you need to program one or more of the PCK0..PCK3
162 programmable clock outputs.