ASoC: Use card field to indicate whether a component is bound
[linux-2.6-block.git] / arch / arm / boot / dts / ste-href.dtsi
1 /*
2  * Copyright 2012 ST-Ericsson AB
3  *
4  * The code contained herein is licensed under the GNU General Public
5  * License. You may obtain a copy of the GNU General Public License
6  * Version 2 or later at the following locations:
7  *
8  * http://www.opensource.org/licenses/gpl-license.html
9  * http://www.gnu.org/copyleft/gpl.html
10  */
11
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include "ste-dbx5x0.dtsi"
14 #include "ste-href-family-pinctrl.dtsi"
15
16 / {
17         memory {
18                 reg = <0x00000000 0x20000000>;
19         };
20
21         soc {
22                 usb_per5@a03e0000 {
23                         pinctrl-names = "default", "sleep";
24                         pinctrl-0 = <&musb_default_mode>;
25                         pinctrl-1 = <&musb_sleep_mode>;
26                 };
27
28                 uart@80120000 {
29                         pinctrl-names = "default", "sleep";
30                         pinctrl-0 = <&uart0_default_mode>;
31                         pinctrl-1 = <&uart0_sleep_mode>;
32                         status = "okay";
33                 };
34
35                 uart@80121000 {
36                         pinctrl-names = "default", "sleep";
37                         pinctrl-0 = <&uart1_default_mode>;
38                         pinctrl-1 = <&uart1_sleep_mode>;
39                         status = "okay";
40                 };
41
42                 uart@80007000 {
43                         pinctrl-names = "default", "sleep";
44                         pinctrl-0 = <&uart2_default_mode>;
45                         pinctrl-1 = <&uart2_sleep_mode>;
46                         status = "okay";
47                 };
48
49                 i2c@80004000 {
50                         pinctrl-names = "default","sleep";
51                         pinctrl-0 = <&i2c0_default_mode>;
52                         pinctrl-1 = <&i2c0_sleep_mode>;
53                 };
54
55                 i2c@80122000 {
56                         pinctrl-names = "default","sleep";
57                         pinctrl-0 = <&i2c1_default_mode>;
58                         pinctrl-1 = <&i2c1_sleep_mode>;
59                 };
60
61                 i2c@80128000 {
62                         pinctrl-names = "default","sleep";
63                         pinctrl-0 = <&i2c2_default_mode>;
64                         pinctrl-1 = <&i2c2_sleep_mode>;
65                         lp5521@33 {
66                                 compatible = "national,lp5521";
67                                 reg = <0x33>;
68                                 label = "lp5521_pri";
69                                 clock-mode = /bits/ 8 <2>;
70                                 chan0 {
71                                         led-cur = /bits/ 8 <0x2f>;
72                                         max-cur = /bits/ 8 <0x5f>;
73                                         linux,default-trigger = "heartbeat";
74                                 };
75                                 chan1 {
76                                         led-cur = /bits/ 8 <0x2f>;
77                                         max-cur = /bits/ 8 <0x5f>;
78                                 };
79                                 chan2 {
80                                         led-cur = /bits/ 8 <0x2f>;
81                                         max-cur = /bits/ 8 <0x5f>;
82                                 };
83                         };
84                         lp5521@34 {
85                                 compatible = "national,lp5521";
86                                 reg = <0x34>;
87                                 label = "lp5521_sec";
88                                 clock-mode = /bits/ 8 <2>;
89                                 chan0 {
90                                         led-cur = /bits/ 8 <0x2f>;
91                                         max-cur = /bits/ 8 <0x5f>;
92                                 };
93                                 chan1 {
94                                         led-cur = /bits/ 8 <0x2f>;
95                                         max-cur = /bits/ 8 <0x5f>;
96                                 };
97                                 chan2 {
98                                         led-cur = /bits/ 8 <0x2f>;
99                                         max-cur = /bits/ 8 <0x5f>;
100                                 };
101                         };
102                         bh1780@29 {
103                                 compatible = "rohm,bh1780gli";
104                                 reg = <0x29>;
105                         };
106                 };
107
108                 i2c@80110000 {
109                         pinctrl-names = "default","sleep";
110                         pinctrl-0 = <&i2c3_default_mode>;
111                         pinctrl-1 = <&i2c3_sleep_mode>;
112                 };
113
114                 vmmci: regulator-gpio {
115                         compatible = "regulator-gpio";
116
117                         regulator-min-microvolt = <1800000>;
118                         regulator-max-microvolt = <2900000>;
119                         regulator-name = "mmci-reg";
120                         regulator-type = "voltage";
121
122                         startup-delay-us = <100>;
123                         enable-active-high;
124
125                         states = <1800000 0x1
126                                   2900000 0x0>;
127                 };
128
129                 // External Micro SD slot
130                 sdi0_per1@80126000 {
131                         arm,primecell-periphid = <0x10480180>;
132                         max-frequency = <100000000>;
133                         bus-width = <4>;
134                         cap-sd-highspeed;
135                         cap-mmc-highspeed;
136                         sd-uhs-sdr12;
137                         sd-uhs-sdr25;
138                         full-pwr-cycle;
139                         st,sig-dir-dat0;
140                         st,sig-dir-dat2;
141                         st,sig-dir-cmd;
142                         st,sig-pin-fbclk;
143                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
144                         vqmmc-supply = <&vmmci>;
145                         pinctrl-names = "default", "sleep";
146                         pinctrl-0 = <&sdi0_default_mode>;
147                         pinctrl-1 = <&sdi0_sleep_mode>;
148
149                         status = "okay";
150                 };
151
152                 // WLAN SDIO channel
153                 sdi1_per2@80118000 {
154                         arm,primecell-periphid = <0x10480180>;
155                         max-frequency = <100000000>;
156                         bus-width = <4>;
157                         non-removable;
158                         pinctrl-names = "default", "sleep";
159                         pinctrl-0 = <&sdi1_default_mode>;
160                         pinctrl-1 = <&sdi1_sleep_mode>;
161
162                         status = "okay";
163                 };
164
165                 // PoP:ed eMMC
166                 sdi2_per3@80005000 {
167                         arm,primecell-periphid = <0x10480180>;
168                         max-frequency = <100000000>;
169                         bus-width = <8>;
170                         cap-mmc-highspeed;
171                         non-removable;
172                         vmmc-supply = <&db8500_vsmps2_reg>;
173                         pinctrl-names = "default", "sleep";
174                         pinctrl-0 = <&sdi2_default_mode>;
175                         pinctrl-1 = <&sdi2_sleep_mode>;
176
177                         status = "okay";
178                 };
179
180                 // On-board eMMC
181                 sdi4_per2@80114000 {
182                         arm,primecell-periphid = <0x10480180>;
183                         max-frequency = <100000000>;
184                         bus-width = <8>;
185                         cap-mmc-highspeed;
186                         non-removable;
187                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
188                         pinctrl-names = "default", "sleep";
189                         pinctrl-0 = <&sdi4_default_mode>;
190                         pinctrl-1 = <&sdi4_sleep_mode>;
191
192                         status = "okay";
193                 };
194
195                 sound {
196                         compatible = "stericsson,snd-soc-mop500";
197
198                         stericsson,cpu-dai = <&msp1 &msp3>;
199                         stericsson,audio-codec = <&codec>;
200                 };
201
202                 msp0: msp@80123000 {
203                         pinctrl-names = "default";
204                         pinctrl-0 = <&msp0_default_mode>;
205                         status = "okay";
206                 };
207
208                 msp1: msp@80124000 {
209                         pinctrl-names = "default";
210                         pinctrl-0 = <&msp1_default_mode>;
211                         status = "okay";
212                 };
213
214                 msp2: msp@80117000 {
215                         pinctrl-names = "default";
216                         pinctrl-0 = <&msp2_default_mode>;
217                 };
218
219                 msp3: msp@80125000 {
220                         status = "okay";
221                 };
222
223                 prcmu@80157000 {
224                         ab8500 {
225                                 ab8500-gpio {
226                                         compatible = "stericsson,ab8500-gpio";
227                                 };
228
229                                 ab8500-regulators {
230                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
231                                                 regulator-name = "V-DISPLAY";
232                                         };
233
234                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
235                                                 regulator-name = "V-eMMC1";
236                                         };
237
238                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
239                                                 regulator-name = "V-MMC-SD";
240                                         };
241
242                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
243                                                 regulator-name = "V-INTCORE";
244                                         };
245
246                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
247                                                 regulator-name = "V-TVOUT";
248                                         };
249
250                                         ab8500_ldo_usb_reg: ab8500_ldo_usb {
251                                                 regulator-name = "dummy";
252                                         };
253
254                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
255                                                 regulator-name = "V-AUD";
256                                         };
257
258                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
259                                                 regulator-name = "V-AMIC1";
260                                         };
261
262                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
263                                                 regulator-name = "V-AMIC2";
264                                         };
265
266                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
267                                                 regulator-name = "V-DMIC";
268                                         };
269
270                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
271                                                 regulator-name = "V-CSI/DSI";
272                                         };
273                                 };
274                         };
275                 };
276
277                 mcde@a0350000 {
278                         pinctrl-names = "default", "sleep";
279                         pinctrl-0 = <&lcd_default_mode>;
280                         pinctrl-1 = <&lcd_sleep_mode>;
281                 };
282         };
283 };