arch/arm/boot/dts/renesas/r8a7793-gose.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Gose board
   4  *
   5  * Copyright (C) 2014-2015 Renesas Electronics Corporation
   6  */
   7
   8 /*
   9  * SSI-AK4643
  10  *
  11  * SW1: 1: AK4643
  12  *      2: CN22
  13  *      3: ADV7511
  14  *
  15  * This command is required when Playback/Capture
  16  *
  17  *      amixer set "LINEOUT Mixer DACL" on
  18  *      amixer set "DVC Out" 100%
  19  *      amixer set "DVC In" 100%
  20  *
  21  * You can use Mute
  22  *
  23  *      amixer set "DVC Out Mute" on
  24  *      amixer set "DVC In Mute" on
  25  *
  26  * You can use Volume Ramp
  27  *
  28  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  29  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  30  *      amixer set "DVC Out Ramp" on
  31  *      aplay xxx.wav &
  32  *      amixer set "DVC Out"  80%  // Volume Down
  33  *      amixer set "DVC Out" 100%  // Volume Up
  34  */
  35
  36 /dts-v1/;
  37 #include "r8a7793.dtsi"
  38 #include <dt-bindings/gpio/gpio.h>
  39 #include <dt-bindings/input/input.h>
  40
  41 / {
  42         model = "Gose";
  43         compatible = "renesas,gose", "renesas,r8a7793";
  44
  45         aliases {
  46                 serial0 = &scif0;
  47                 serial1 = &scif1;
  48                 i2c9 = &gpioi2c2;
  49                 i2c10 = &gpioi2c4;
  50                 i2c11 = &i2chdmi;
  51                 i2c12 = &i2cexio4;
  52                 mmc0 = &sdhi0;
  53                 mmc1 = &sdhi1;
  54                 mmc2 = &sdhi2;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         keyboard {
  68                 compatible = "gpio-keys";
  69
  70                 pinctrl-0 = <&keyboard_pins>;
  71                 pinctrl-names = "default";
  72
  73                 key-1 {
  74                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_1>;
  76                         label = "SW2-1";
  77                         wakeup-source;
  78                         debounce-interval = <20>;
  79                 };
  80                 key-2 {
  81                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_2>;
  83                         label = "SW2-2";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                 };
  87                 key-3 {
  88                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_3>;
  90                         label = "SW2-3";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                 };
  94                 key-4 {
  95                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_4>;
  97                         label = "SW2-4";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                 };
 101                 key-a {
 102                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_A>;
 104                         label = "SW30";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                 };
 108                 key-b {
 109                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_B>;
 111                         label = "SW31";
 112                         wakeup-source;
 113                         debounce-interval = <20>;
 114                 };
 115                 key-c {
 116                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_C>;
 118                         label = "SW32";
 119                         wakeup-source;
 120                         debounce-interval = <20>;
 121                 };
 122                 key-d {
 123                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_D>;
 125                         label = "SW33";
 126                         wakeup-source;
 127                         debounce-interval = <20>;
 128                 };
 129                 key-e {
 130                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_E>;
 132                         label = "SW34";
 133                         wakeup-source;
 134                         debounce-interval = <20>;
 135                 };
 136                 key-f {
 137                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_F>;
 139                         label = "SW35";
 140                         wakeup-source;
 141                         debounce-interval = <20>;
 142                 };
 143                 key-g {
 144                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_G>;
 146                         label = "SW36";
 147                         wakeup-source;
 148                         debounce-interval = <20>;
 149                 };
 150         };
 151
 152         leds {
 153                 compatible = "gpio-leds";
 154                 led6 {
 155                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 156                         label = "LED6";
 157                 };
 158                 led7 {
 159                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 160                         label = "LED7";
 161                 };
 162                 led8 {
 163                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 164                         label = "LED8";
 165                 };
 166         };
 167
 168         reg_1p8v: regulator-1v8 {
 169                 compatible = "regulator-fixed";
 170                 regulator-name = "fixed-1.8V";
 171                 regulator-min-microvolt = <1800000>;
 172                 regulator-max-microvolt = <1800000>;
 173                 regulator-boot-on;
 174                 regulator-always-on;
 175         };
 176
 177         reg_3p3v: regulator-3v3 {
 178                 compatible = "regulator-fixed";
 179                 regulator-name = "fixed-3.3V";
 180                 regulator-min-microvolt = <3300000>;
 181                 regulator-max-microvolt = <3300000>;
 182                 regulator-boot-on;
 183                 regulator-always-on;
 184         };
 185
 186         vcc_sdhi0: regulator-vcc-sdhi0 {
 187                 compatible = "regulator-fixed";
 188
 189                 regulator-name = "SDHI0 Vcc";
 190                 regulator-min-microvolt = <3300000>;
 191                 regulator-max-microvolt = <3300000>;
 192
 193                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 194                 enable-active-high;
 195         };
 196
 197         vccq_sdhi0: regulator-vccq-sdhi0 {
 198                 compatible = "regulator-gpio";
 199
 200                 regulator-name = "SDHI0 VccQ";
 201                 regulator-min-microvolt = <1800000>;
 202                 regulator-max-microvolt = <3300000>;
 203
 204                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 205                 gpios-states = <1>;
 206                 states = <3300000 1>, <1800000 0>;
 207         };
 208
 209         vcc_sdhi1: regulator-vcc-sdhi1 {
 210                 compatible = "regulator-fixed";
 211
 212                 regulator-name = "SDHI1 Vcc";
 213                 regulator-min-microvolt = <3300000>;
 214                 regulator-max-microvolt = <3300000>;
 215
 216                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 217                 enable-active-high;
 218         };
 219
 220         vccq_sdhi1: regulator-vccq-sdhi1 {
 221                 compatible = "regulator-gpio";
 222
 223                 regulator-name = "SDHI1 VccQ";
 224                 regulator-min-microvolt = <1800000>;
 225                 regulator-max-microvolt = <3300000>;
 226
 227                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 228                 gpios-states = <1>;
 229                 states = <3300000 1>, <1800000 0>;
 230         };
 231
 232         vcc_sdhi2: regulator-vcc-sdhi2 {
 233                 compatible = "regulator-fixed";
 234
 235                 regulator-name = "SDHI2 Vcc";
 236                 regulator-min-microvolt = <3300000>;
 237                 regulator-max-microvolt = <3300000>;
 238
 239                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 240                 enable-active-high;
 241         };
 242
 243         vccq_sdhi2: regulator-vccq-sdhi2 {
 244                 compatible = "regulator-gpio";
 245
 246                 regulator-name = "SDHI2 VccQ";
 247                 regulator-min-microvolt = <1800000>;
 248                 regulator-max-microvolt = <3300000>;
 249
 250                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 251                 gpios-states = <1>;
 252                 states = <3300000 1>, <1800000 0>;
 253         };
 254
 255         audio_clock: audio_clock {
 256                 compatible = "fixed-clock";
 257                 #clock-cells = <0>;
 258                 clock-frequency = <11289600>;
 259         };
 260
 261         rsnd_ak4643: sound {
 262                 compatible = "simple-audio-card";
 263
 264                 simple-audio-card,format = "left_j";
 265                 simple-audio-card,bitclock-master = <&sndcodec>;
 266                 simple-audio-card,frame-master = <&sndcodec>;
 267
 268                 sndcpu: simple-audio-card,cpu {
 269                         sound-dai = <&rcar_sound>;
 270                 };
 271
 272                 sndcodec: simple-audio-card,codec {
 273                         sound-dai = <&ak4643>;
 274                         clocks = <&audio_clock>;
 275                 };
 276         };
 277
 278         hdmi-in {
 279                 compatible = "hdmi-connector";
 280                 type = "a";
 281
 282                 port {
 283                         hdmi_con_in: endpoint {
 284                                 remote-endpoint = <&adv7612_in>;
 285                         };
 286                 };
 287         };
 288
 289         hdmi-out {
 290                 compatible = "hdmi-connector";
 291                 type = "a";
 292
 293                 port {
 294                         hdmi_con_out: endpoint {
 295                                 remote-endpoint = <&adv7511_out>;
 296                         };
 297                 };
 298         };
 299
 300         composite-in {
 301                 compatible = "composite-video-connector";
 302
 303                 port {
 304                         composite_con_in: endpoint {
 305                                 remote-endpoint = <&adv7180_in>;
 306                         };
 307                 };
 308         };
 309
 310         x2_clk: x2-clock {
 311                 compatible = "fixed-clock";
 312                 #clock-cells = <0>;
 313                 clock-frequency = <74250000>;
 314         };
 315
 316         x13_clk: x13-clock {
 317                 compatible = "fixed-clock";
 318                 #clock-cells = <0>;
 319                 clock-frequency = <148500000>;
 320         };
 321
 322         gpioi2c2: i2c-9 {
 323                 #address-cells = <1>;
 324                 #size-cells = <0>;
 325                 compatible = "i2c-gpio";
 326                 status = "disabled";
 327                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 328                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 329                 i2c-gpio,delay-us = <5>;
 330         };
 331
 332         gpioi2c4: i2c-10 {
 333                 #address-cells = <1>;
 334                 #size-cells = <0>;
 335                 compatible = "i2c-gpio";
 336                 status = "disabled";
 337                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 338                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 339                 i2c-gpio,delay-us = <5>;
 340         };
 341
 342         /*
 343          * A fallback to GPIO is provided for I2C2.
 344          */
 345         i2chdmi: i2c-mux1 {
 346                 compatible = "i2c-demux-pinctrl";
 347                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 348                 i2c-bus-name = "i2c-hdmi";
 349                 #address-cells = <1>;
 350                 #size-cells = <0>;
 351
 352                 ak4643: codec@12 {
 353                         compatible = "asahi-kasei,ak4643";
 354                         #sound-dai-cells = <0>;
 355                         reg = <0x12>;
 356                 };
 357
 358                 composite-in@20 {
 359                         compatible = "adi,adv7180cp";
 360                         reg = <0x20>;
 361
 362                         ports {
 363                                 #address-cells = <1>;
 364                                 #size-cells = <0>;
 365
 366                                 port@0 {
 367                                         reg = <0>;
 368                                         adv7180_in: endpoint {
 369                                                 remote-endpoint = <&composite_con_in>;
 370                                         };
 371                                 };
 372
 373                                 port@3 {
 374                                         reg = <3>;
 375                                         adv7180_out: endpoint {
 376                                                 bus-width = <8>;
 377                                                 remote-endpoint = <&vin1ep>;
 378                                         };
 379                                 };
 380                         };
 381                 };
 382
 383                 hdmi@39 {
 384                         compatible = "adi,adv7511w";
 385                         reg = <0x39>;
 386                         interrupt-parent = <&gpio3>;
 387                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 388
 389                         avdd-supply = <&reg_1p8v>;
 390                         dvdd-supply = <&reg_1p8v>;
 391                         pvdd-supply = <&reg_1p8v>;
 392                         dvdd-3v-supply = <&reg_3p3v>;
 393                         bgvdd-supply = <&reg_1p8v>;
 394
 395                         adi,input-depth = <8>;
 396                         adi,input-colorspace = "rgb";
 397                         adi,input-clock = "1x";
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 port@0 {
 404                                         reg = <0>;
 405                                         adv7511_in: endpoint {
 406                                                 remote-endpoint = <&du_out_rgb>;
 407                                         };
 408                                 };
 409
 410                                 port@1 {
 411                                         reg = <1>;
 412                                         adv7511_out: endpoint {
 413                                                 remote-endpoint = <&hdmi_con_out>;
 414                                         };
 415                                 };
 416                         };
 417                 };
 418
 419                 hdmi-in@4c {
 420                         compatible = "adi,adv7612";
 421                         reg = <0x4c>;
 422                         interrupt-parent = <&gpio4>;
 423                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 424                         default-input = <0>;
 425
 426                         ports {
 427                                 #address-cells = <1>;
 428                                 #size-cells = <0>;
 429
 430                                 port@0 {
 431                                         reg = <0>;
 432                                         adv7612_in: endpoint {
 433                                                 remote-endpoint = <&hdmi_con_in>;
 434                                         };
 435                                 };
 436
 437                                 port@2 {
 438                                         reg = <2>;
 439                                         adv7612_out: endpoint {
 440                                                 remote-endpoint = <&vin0ep2>;
 441                                         };
 442                                 };
 443                         };
 444                 };
 445
 446                 eeprom@50 {
 447                         compatible = "renesas,r1ex24002", "atmel,24c02";
 448                         reg = <0x50>;
 449                         pagesize = <16>;
 450                 };
 451         };
 452
 453         /*
 454          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 455          * A fallback to GPIO is provided.
 456          */
 457         i2cexio4: i2c-mux2 {
 458                 compatible = "i2c-demux-pinctrl";
 459                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 460                 i2c-bus-name = "i2c-exio4";
 461                 #address-cells = <1>;
 462                 #size-cells = <0>;
 463         };
 464 };
 465
 466 &du {
 467         pinctrl-0 = <&du_pins>;
 468         pinctrl-names = "default";
 469         status = "okay";
 470
 471         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 472                  <&x13_clk>, <&x2_clk>;
 473         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 474
 475         ports {
 476                 port@0 {
 477                         endpoint {
 478                                 remote-endpoint = <&adv7511_in>;
 479                         };
 480                 };
 481         };
 482 };
 483
 484 &lvds0 {
 485         ports {
 486                 port@1 {
 487                         lvds_connector: endpoint {
 488                         };
 489                 };
 490         };
 491 };
 492
 493 &extal_clk {
 494         clock-frequency = <20000000>;
 495 };
 496
 497 &pfc {
 498         pinctrl-0 = <&scif_clk_pins>;
 499         pinctrl-names = "default";
 500
 501         i2c2_pins: i2c2 {
 502                 groups = "i2c2";
 503                 function = "i2c2";
 504         };
 505
 506         i2c4_pins: i2c4 {
 507                 groups = "i2c4_c";
 508                 function = "i2c4";
 509         };
 510
 511         du_pins: du {
 512                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 513                 function = "du";
 514         };
 515
 516         scif0_pins: scif0 {
 517                 groups = "scif0_data_d";
 518                 function = "scif0";
 519         };
 520
 521         scif1_pins: scif1 {
 522                 groups = "scif1_data_d";
 523                 function = "scif1";
 524         };
 525
 526         scif_clk_pins: scif_clk {
 527                 groups = "scif_clk";
 528                 function = "scif_clk";
 529         };
 530
 531         ether_pins: ether {
 532                 groups = "eth_link", "eth_mdio", "eth_rmii";
 533                 function = "eth";
 534         };
 535
 536         phy1_pins: phy1 {
 537                 groups = "intc_irq0";
 538                 function = "intc";
 539         };
 540
 541         pmic_irq_pins: pmicirq {
 542                 groups = "intc_irq2";
 543                 function = "intc";
 544         };
 545
 546         sdhi0_pins: sd0 {
 547                 groups = "sdhi0_data4", "sdhi0_ctrl";
 548                 function = "sdhi0";
 549                 power-source = <3300>;
 550         };
 551
 552         sdhi0_pins_uhs: sd0_uhs {
 553                 groups = "sdhi0_data4", "sdhi0_ctrl";
 554                 function = "sdhi0";
 555                 power-source = <1800>;
 556         };
 557
 558         sdhi1_pins: sd1 {
 559                 groups = "sdhi1_data4", "sdhi1_ctrl";
 560                 function = "sdhi1";
 561                 power-source = <3300>;
 562         };
 563
 564         sdhi1_pins_uhs: sd1_uhs {
 565                 groups = "sdhi1_data4", "sdhi1_ctrl";
 566                 function = "sdhi1";
 567                 power-source = <1800>;
 568         };
 569
 570         sdhi2_pins: sd2 {
 571                 groups = "sdhi2_data4", "sdhi2_ctrl";
 572                 function = "sdhi2";
 573                 power-source = <3300>;
 574         };
 575
 576         sdhi2_pins_uhs: sd2_uhs {
 577                 groups = "sdhi2_data4", "sdhi2_ctrl";
 578                 function = "sdhi2";
 579                 power-source = <1800>;
 580         };
 581
 582         qspi_pins: qspi {
 583                 groups = "qspi_ctrl", "qspi_data4";
 584                 function = "qspi";
 585         };
 586
 587         sound_pins: sound {
 588                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 589                 function = "ssi";
 590         };
 591
 592         sound_clk_pins: sound_clk {
 593                 groups = "audio_clk_a";
 594                 function = "audio_clk";
 595         };
 596
 597         keyboard_pins: keyboard {
 598                 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
 599                 bias-pull-up;
 600         };
 601
 602         vin0_pins: vin0 {
 603                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 604                 function = "vin0";
 605         };
 606
 607         vin1_pins: vin1 {
 608                 groups = "vin1_data8", "vin1_clk";
 609                 function = "vin1";
 610         };
 611 };
 612
 613 &ether {
 614         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 615         pinctrl-names = "default";
 616
 617         phy-handle = <&phy1>;
 618         renesas,ether-link-active-low;
 619         status = "okay";
 620
 621         phy1: ethernet-phy@1 {
 622                 compatible = "ethernet-phy-id0022.1537",
 623                              "ethernet-phy-ieee802.3-c22";
 624                 reg = <1>;
 625                 interrupt-parent = <&irqc0>;
 626                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 627                 micrel,led-mode = <1>;
 628                 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 629         };
 630 };
 631
 632 &cmt0 {
 633         status = "okay";
 634 };
 635
 636 &cpu0 {
 637         cpu0-supply = <&vdd_dvfs>;
 638 };
 639
 640 &rwdt {
 641         timeout-sec = <60>;
 642         status = "okay";
 643 };
 644
 645 &scif0 {
 646         pinctrl-0 = <&scif0_pins>;
 647         pinctrl-names = "default";
 648
 649         status = "okay";
 650 };
 651
 652 &scif1 {
 653         pinctrl-0 = <&scif1_pins>;
 654         pinctrl-names = "default";
 655
 656         status = "okay";
 657 };
 658
 659 &scif_clk {
 660         clock-frequency = <14745600>;
 661 };
 662
 663 &sdhi0 {
 664         pinctrl-0 = <&sdhi0_pins>;
 665         pinctrl-1 = <&sdhi0_pins_uhs>;
 666         pinctrl-names = "default", "state_uhs";
 667
 668         vmmc-supply = <&vcc_sdhi0>;
 669         vqmmc-supply = <&vccq_sdhi0>;
 670         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 671         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 672         sd-uhs-sdr50;
 673         sd-uhs-sdr104;
 674         status = "okay";
 675 };
 676
 677 &sdhi1 {
 678         pinctrl-0 = <&sdhi1_pins>;
 679         pinctrl-1 = <&sdhi1_pins_uhs>;
 680         pinctrl-names = "default", "state_uhs";
 681
 682         vmmc-supply = <&vcc_sdhi1>;
 683         vqmmc-supply = <&vccq_sdhi1>;
 684         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 685         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 686         sd-uhs-sdr50;
 687         status = "okay";
 688 };
 689
 690 &sdhi2 {
 691         pinctrl-0 = <&sdhi2_pins>;
 692         pinctrl-1 = <&sdhi2_pins_uhs>;
 693         pinctrl-names = "default", "state_uhs";
 694
 695         vmmc-supply = <&vcc_sdhi2>;
 696         vqmmc-supply = <&vccq_sdhi2>;
 697         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 698         sd-uhs-sdr50;
 699         status = "okay";
 700 };
 701
 702 &qspi {
 703         pinctrl-0 = <&qspi_pins>;
 704         pinctrl-names = "default";
 705
 706         status = "okay";
 707
 708         flash@0 {
 709                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 710                 reg = <0>;
 711                 spi-max-frequency = <30000000>;
 712                 spi-tx-bus-width = <4>;
 713                 spi-rx-bus-width = <4>;
 714                 spi-cpol;
 715                 spi-cpha;
 716                 m25p,fast-read;
 717
 718                 partitions {
 719                         compatible = "fixed-partitions";
 720                         #address-cells = <1>;
 721                         #size-cells = <1>;
 722
 723                         partition@0 {
 724                                 label = "loader";
 725                                 reg = <0x00000000 0x00040000>;
 726                                 read-only;
 727                         };
 728                         partition@40000 {
 729                                 label = "user";
 730                                 reg = <0x00040000 0x00400000>;
 731                                 read-only;
 732                         };
 733                         partition@440000 {
 734                                 label = "flash";
 735                                 reg = <0x00440000 0x03bc0000>;
 736                         };
 737                 };
 738         };
 739 };
 740
 741 &i2c2 {
 742         pinctrl-0 = <&i2c2_pins>;
 743         pinctrl-names = "i2c-hdmi";
 744
 745         status = "okay";
 746         clock-frequency = <100000>;
 747
 748 };
 749
 750 &i2c6 {
 751         pinctrl-names = "default";
 752         pinctrl-0 = <&pmic_irq_pins>;
 753         status = "okay";
 754         clock-frequency = <100000>;
 755
 756         pmic@58 {
 757                 compatible = "dlg,da9063";
 758                 reg = <0x58>;
 759                 interrupt-parent = <&irqc0>;
 760                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 761                 interrupt-controller;
 762                 #interrupt-cells = <2>;
 763
 764                 rtc {
 765                         compatible = "dlg,da9063-rtc";
 766                 };
 767
 768                 watchdog {
 769                         compatible = "dlg,da9063-watchdog";
 770                 };
 771         };
 772
 773         vdd_dvfs: regulator@68 {
 774                 compatible = "dlg,da9210";
 775                 reg = <0x68>;
 776                 interrupt-parent = <&irqc0>;
 777                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 778
 779                 regulator-min-microvolt = <1000000>;
 780                 regulator-max-microvolt = <1000000>;
 781                 regulator-boot-on;
 782                 regulator-always-on;
 783         };
 784 };
 785
 786 &i2c4 {
 787         pinctrl-0 = <&i2c4_pins>;
 788         pinctrl-names = "i2c-exio4";
 789 };
 790
 791 &rcar_sound {
 792         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 793         pinctrl-names = "default";
 794
 795         /* Single DAI */
 796         #sound-dai-cells = <0>;
 797
 798         status = "okay";
 799
 800         rcar_sound,dai {
 801                 dai0 {
 802                         playback = <&ssi0>, <&src2>, <&dvc0>;
 803                         capture  = <&ssi1>, <&src3>, <&dvc1>;
 804                 };
 805         };
 806 };
 807
 808 &ssi1 {
 809         shared-pin;
 810 };
 811
 812 /* HDMI video input */
 813 &vin0 {
 814         status = "okay";
 815         pinctrl-0 = <&vin0_pins>;
 816         pinctrl-names = "default";
 817
 818         port {
 819                 vin0ep2: endpoint {
 820                         remote-endpoint = <&adv7612_out>;
 821                         bus-width = <24>;
 822                         hsync-active = <0>;
 823                         vsync-active = <0>;
 824                         pclk-sample = <1>;
 825                         data-active = <1>;
 826                 };
 827         };
 828 };
 829
 830 /* composite video input */
 831 &vin1 {
 832         pinctrl-0 = <&vin1_pins>;
 833         pinctrl-names = "default";
 834
 835         status = "okay";
 836
 837         port {
 838                 vin1ep: endpoint {
 839                         remote-endpoint = <&adv7180_out>;
 840                         bus-width = <8>;
 841                 };
 842         };
 843 };