arch/arm/boot/dts/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7791.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Koelsch";
  48         compatible = "renesas,koelsch", "renesas,r8a7791";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scif1;
  53                 i2c9 = &gpioi2c1;
  54                 i2c10 = &gpioi2c2;
  55                 i2c11 = &gpioi2c4;
  56                 i2c12 = &i2cexio1;
  57                 i2c13 = &i2chdmi;
  58                 i2c14 = &i2cexio4;
  59         };
  60
  61         chosen {
  62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  63                 stdout-path = "serial0:115200n8";
  64         };
  65
  66         memory@40000000 {
  67                 device_type = "memory";
  68                 reg = <0 0x40000000 0 0x40000000>;
  69         };
  70
  71         memory@200000000 {
  72                 device_type = "memory";
  73                 reg = <2 0x00000000 0 0x40000000>;
  74         };
  75
  76         lbsc {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79         };
  80
  81         keyboard {
  82                 compatible = "gpio-keys";
  83
  84                 key-1 {
  85                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_1>;
  87                         label = "SW2-1";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-2 {
  92                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_2>;
  94                         label = "SW2-2";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-3 {
  99                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_3>;
 101                         label = "SW2-3";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-4 {
 106                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_4>;
 108                         label = "SW2-4";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-a {
 113                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_A>;
 115                         label = "SW30";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-b {
 120                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_B>;
 122                         label = "SW31";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-c {
 127                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_C>;
 129                         label = "SW32";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-d {
 134                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_D>;
 136                         label = "SW33";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-e {
 141                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_E>;
 143                         label = "SW34";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147                 key-f {
 148                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_F>;
 150                         label = "SW35";
 151                         wakeup-source;
 152                         debounce-interval = <20>;
 153                 };
 154                 key-g {
 155                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 156                         linux,code = <KEY_G>;
 157                         label = "SW36";
 158                         wakeup-source;
 159                         debounce-interval = <20>;
 160                 };
 161         };
 162
 163         leds {
 164                 compatible = "gpio-leds";
 165                 led6 {
 166                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 167                         label = "LED6";
 168                 };
 169                 led7 {
 170                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 171                         label = "LED7";
 172                 };
 173                 led8 {
 174                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 175                         label = "LED8";
 176                 };
 177         };
 178
 179         vcc_sdhi0: regulator-vcc-sdhi0 {
 180                 compatible = "regulator-fixed";
 181
 182                 regulator-name = "SDHI0 Vcc";
 183                 regulator-min-microvolt = <3300000>;
 184                 regulator-max-microvolt = <3300000>;
 185
 186                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 187                 enable-active-high;
 188         };
 189
 190         vccq_sdhi0: regulator-vccq-sdhi0 {
 191                 compatible = "regulator-gpio";
 192
 193                 regulator-name = "SDHI0 VccQ";
 194                 regulator-min-microvolt = <1800000>;
 195                 regulator-max-microvolt = <3300000>;
 196
 197                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 198                 gpios-states = <1>;
 199                 states = <3300000 1
 200                           1800000 0>;
 201         };
 202
 203         vcc_sdhi1: regulator-vcc-sdhi1 {
 204                 compatible = "regulator-fixed";
 205
 206                 regulator-name = "SDHI1 Vcc";
 207                 regulator-min-microvolt = <3300000>;
 208                 regulator-max-microvolt = <3300000>;
 209
 210                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 211                 enable-active-high;
 212         };
 213
 214         vccq_sdhi1: regulator-vccq-sdhi1 {
 215                 compatible = "regulator-gpio";
 216
 217                 regulator-name = "SDHI1 VccQ";
 218                 regulator-min-microvolt = <1800000>;
 219                 regulator-max-microvolt = <3300000>;
 220
 221                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 222                 gpios-states = <1>;
 223                 states = <3300000 1
 224                           1800000 0>;
 225         };
 226
 227         vcc_sdhi2: regulator-vcc-sdhi2 {
 228                 compatible = "regulator-fixed";
 229
 230                 regulator-name = "SDHI2 Vcc";
 231                 regulator-min-microvolt = <3300000>;
 232                 regulator-max-microvolt = <3300000>;
 233
 234                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 235                 enable-active-high;
 236         };
 237
 238         vccq_sdhi2: regulator-vccq-sdhi2 {
 239                 compatible = "regulator-gpio";
 240
 241                 regulator-name = "SDHI2 VccQ";
 242                 regulator-min-microvolt = <1800000>;
 243                 regulator-max-microvolt = <3300000>;
 244
 245                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 246                 gpios-states = <1>;
 247                 states = <3300000 1
 248                           1800000 0>;
 249         };
 250
 251         audio_clock: audio_clock {
 252                 compatible = "fixed-clock";
 253                 #clock-cells = <0>;
 254                 clock-frequency = <11289600>;
 255         };
 256
 257         rsnd_ak4643: sound {
 258                 compatible = "simple-audio-card";
 259
 260                 simple-audio-card,format = "left_j";
 261                 simple-audio-card,bitclock-master = <&sndcodec>;
 262                 simple-audio-card,frame-master = <&sndcodec>;
 263
 264                 sndcpu: simple-audio-card,cpu {
 265                         sound-dai = <&rcar_sound>;
 266                 };
 267
 268                 sndcodec: simple-audio-card,codec {
 269                         sound-dai = <&ak4643>;
 270                         clocks = <&audio_clock>;
 271                 };
 272         };
 273
 274         hdmi-in {
 275                 compatible = "hdmi-connector";
 276                 type = "a";
 277
 278                 port {
 279                         hdmi_con_in: endpoint {
 280                                 remote-endpoint = <&adv7612_in>;
 281                         };
 282                 };
 283         };
 284
 285         cec_clock: cec-clock {
 286                 compatible = "fixed-clock";
 287                 #clock-cells = <0>;
 288                 clock-frequency = <12000000>;
 289         };
 290
 291         hdmi-out {
 292                 compatible = "hdmi-connector";
 293                 type = "a";
 294
 295                 port {
 296                         hdmi_con_out: endpoint {
 297                                 remote-endpoint = <&adv7511_out>;
 298                         };
 299                 };
 300         };
 301
 302         x2_clk: x2-clock {
 303                 compatible = "fixed-clock";
 304                 #clock-cells = <0>;
 305                 clock-frequency = <74250000>;
 306         };
 307
 308         x13_clk: x13-clock {
 309                 compatible = "fixed-clock";
 310                 #clock-cells = <0>;
 311                 clock-frequency = <148500000>;
 312         };
 313
 314         gpioi2c1: i2c-9 {
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317                 compatible = "i2c-gpio";
 318                 status = "disabled";
 319                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 320                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 321                 i2c-gpio,delay-us = <5>;
 322         };
 323
 324         gpioi2c2: i2c-10 {
 325                 #address-cells = <1>;
 326                 #size-cells = <0>;
 327                 compatible = "i2c-gpio";
 328                 status = "disabled";
 329                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 330                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 331                 i2c-gpio,delay-us = <5>;
 332         };
 333
 334         gpioi2c4: i2c-11 {
 335                 #address-cells = <1>;
 336                 #size-cells = <0>;
 337                 compatible = "i2c-gpio";
 338                 status = "disabled";
 339                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 340                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 341                 i2c-gpio,delay-us = <5>;
 342         };
 343
 344         /*
 345          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 346          * A fallback to GPIO is provided.
 347          */
 348         i2cexio1: i2c-12 {
 349                 compatible = "i2c-demux-pinctrl";
 350                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 351                 i2c-bus-name = "i2c-exio1";
 352                 #address-cells = <1>;
 353                 #size-cells = <0>;
 354         };
 355
 356         /*
 357          * A fallback to GPIO is provided for I2C2.
 358          */
 359         i2chdmi: i2c-13 {
 360                 compatible = "i2c-demux-pinctrl";
 361                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 362                 i2c-bus-name = "i2c-hdmi";
 363                 #address-cells = <1>;
 364                 #size-cells = <0>;
 365
 366                 ak4643: codec@12 {
 367                         compatible = "asahi-kasei,ak4643";
 368                         #sound-dai-cells = <0>;
 369                         reg = <0x12>;
 370                 };
 371
 372                 composite-in@20 {
 373                         compatible = "adi,adv7180";
 374                         reg = <0x20>;
 375                         remote = <&vin1>;
 376
 377                         port {
 378                                 adv7180: endpoint {
 379                                         bus-width = <8>;
 380                                         remote-endpoint = <&vin1ep>;
 381                                 };
 382                         };
 383                 };
 384
 385                 hdmi@39 {
 386                         compatible = "adi,adv7511w";
 387                         reg = <0x39>;
 388                         interrupt-parent = <&gpio3>;
 389                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 390                         clocks = <&cec_clock>;
 391                         clock-names = "cec";
 392
 393                         adi,input-depth = <8>;
 394                         adi,input-colorspace = "rgb";
 395                         adi,input-clock = "1x";
 396                         adi,input-style = <1>;
 397                         adi,input-justification = "evenly";
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 port@0 {
 404                                         reg = <0>;
 405                                         adv7511_in: endpoint {
 406                                                 remote-endpoint = <&du_out_rgb>;
 407                                         };
 408                                 };
 409
 410                                 port@1 {
 411                                         reg = <1>;
 412                                         adv7511_out: endpoint {
 413                                                 remote-endpoint = <&hdmi_con_out>;
 414                                         };
 415                                 };
 416                         };
 417                 };
 418
 419                 hdmi-in@4c {
 420                         compatible = "adi,adv7612";
 421                         reg = <0x4c>;
 422                         interrupt-parent = <&gpio4>;
 423                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 424                         default-input = <0>;
 425
 426                         ports {
 427                                 #address-cells = <1>;
 428                                 #size-cells = <0>;
 429
 430                                 port@0 {
 431                                         reg = <0>;
 432                                         adv7612_in: endpoint {
 433                                                 remote-endpoint = <&hdmi_con_in>;
 434                                         };
 435                                 };
 436
 437                                 port@2 {
 438                                         reg = <2>;
 439                                         adv7612_out: endpoint {
 440                                                 remote-endpoint = <&vin0ep2>;
 441                                         };
 442                                 };
 443                         };
 444                 };
 445
 446                 eeprom@50 {
 447                         compatible = "renesas,r1ex24002", "atmel,24c02";
 448                         reg = <0x50>;
 449                         pagesize = <16>;
 450                 };
 451         };
 452
 453         /*
 454          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 455          * A fallback to GPIO is provided.
 456          */
 457         i2cexio4: i2c-14 {
 458                 compatible = "i2c-demux-pinctrl";
 459                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 460                 i2c-bus-name = "i2c-exio4";
 461                 #address-cells = <1>;
 462                 #size-cells = <0>;
 463         };
 464 };
 465
 466 &du {
 467         pinctrl-0 = <&du_pins>;
 468         pinctrl-names = "default";
 469         status = "okay";
 470
 471         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
 472                  <&x13_clk>, <&x2_clk>;
 473         clock-names = "du.0", "du.1", "lvds.0",
 474                       "dclkin.0", "dclkin.1";
 475
 476         ports {
 477                 port@0 {
 478                         endpoint {
 479                                 remote-endpoint = <&adv7511_in>;
 480                         };
 481                 };
 482                 port@1 {
 483                         lvds_connector: endpoint {
 484                         };
 485                 };
 486         };
 487 };
 488
 489 &extal_clk {
 490         clock-frequency = <20000000>;
 491 };
 492
 493 &pfc {
 494         pinctrl-0 = <&scif_clk_pins>;
 495         pinctrl-names = "default";
 496
 497         i2c1_pins: i2c1 {
 498                 groups = "i2c1";
 499                 function = "i2c1";
 500         };
 501
 502         i2c2_pins: i2c2 {
 503                 groups = "i2c2";
 504                 function = "i2c2";
 505         };
 506
 507         i2c4_pins: i2c4 {
 508                 groups = "i2c4_c";
 509                 function = "i2c4";
 510         };
 511
 512         du_pins: du {
 513                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 514                 function = "du";
 515         };
 516
 517         scif0_pins: scif0 {
 518                 groups = "scif0_data_d";
 519                 function = "scif0";
 520         };
 521
 522         scif1_pins: scif1 {
 523                 groups = "scif1_data_d";
 524                 function = "scif1";
 525         };
 526
 527         scif_clk_pins: scif_clk {
 528                 groups = "scif_clk";
 529                 function = "scif_clk";
 530         };
 531
 532         ether_pins: ether {
 533                 groups = "eth_link", "eth_mdio", "eth_rmii";
 534                 function = "eth";
 535         };
 536
 537         phy1_pins: phy1 {
 538                 groups = "intc_irq0";
 539                 function = "intc";
 540         };
 541
 542         sdhi0_pins: sd0 {
 543                 groups = "sdhi0_data4", "sdhi0_ctrl";
 544                 function = "sdhi0";
 545                 power-source = <3300>;
 546         };
 547
 548         sdhi0_pins_uhs: sd0_uhs {
 549                 groups = "sdhi0_data4", "sdhi0_ctrl";
 550                 function = "sdhi0";
 551                 power-source = <1800>;
 552         };
 553
 554         sdhi1_pins: sd1 {
 555                 groups = "sdhi1_data4", "sdhi1_ctrl";
 556                 function = "sdhi1";
 557                 power-source = <3300>;
 558         };
 559
 560         sdhi1_pins_uhs: sd1_uhs {
 561                 groups = "sdhi1_data4", "sdhi1_ctrl";
 562                 function = "sdhi1";
 563                 power-source = <1800>;
 564         };
 565
 566         sdhi2_pins: sd2 {
 567                 groups = "sdhi2_data4", "sdhi2_ctrl";
 568                 function = "sdhi2";
 569                 power-source = <3300>;
 570         };
 571
 572         sdhi2_pins_uhs: sd2_uhs {
 573                 groups = "sdhi2_data4", "sdhi2_ctrl";
 574                 function = "sdhi2";
 575                 power-source = <1800>;
 576         };
 577
 578         qspi_pins: qspi {
 579                 groups = "qspi_ctrl", "qspi_data4";
 580                 function = "qspi";
 581         };
 582
 583         msiof0_pins: msiof0 {
 584                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 585                                  "msiof0_tx";
 586                 function = "msiof0";
 587         };
 588
 589         usb0_pins: usb0 {
 590                 groups = "usb0";
 591                 function = "usb0";
 592         };
 593
 594         usb1_pins: usb1 {
 595                 groups = "usb1";
 596                 function = "usb1";
 597         };
 598
 599         vin0_pins: vin0 {
 600                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 601                 function = "vin0";
 602         };
 603
 604         vin1_pins: vin1 {
 605                 groups = "vin1_data8", "vin1_clk";
 606                 function = "vin1";
 607         };
 608
 609         sound_pins: sound {
 610                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 611                 function = "ssi";
 612         };
 613
 614         sound_clk_pins: sound_clk {
 615                 groups = "audio_clk_a";
 616                 function = "audio_clk";
 617         };
 618 };
 619
 620 &ether {
 621         pinctrl-0 = <&ether_pins &phy1_pins>;
 622         pinctrl-names = "default";
 623
 624         phy-handle = <&phy1>;
 625         renesas,ether-link-active-low;
 626         status = "okay";
 627
 628         phy1: ethernet-phy@1 {
 629                 reg = <1>;
 630                 interrupt-parent = <&irqc0>;
 631                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 632                 micrel,led-mode = <1>;
 633         };
 634 };
 635
 636 &cmt0 {
 637         status = "okay";
 638 };
 639
 640 &sata0 {
 641         status = "okay";
 642 };
 643
 644 &scif0 {
 645         pinctrl-0 = <&scif0_pins>;
 646         pinctrl-names = "default";
 647
 648         status = "okay";
 649 };
 650
 651 &scif1 {
 652         pinctrl-0 = <&scif1_pins>;
 653         pinctrl-names = "default";
 654
 655         status = "okay";
 656 };
 657
 658 &scif_clk {
 659         clock-frequency = <14745600>;
 660 };
 661
 662 &sdhi0 {
 663         pinctrl-0 = <&sdhi0_pins>;
 664         pinctrl-1 = <&sdhi0_pins_uhs>;
 665         pinctrl-names = "default", "state_uhs";
 666
 667         vmmc-supply = <&vcc_sdhi0>;
 668         vqmmc-supply = <&vccq_sdhi0>;
 669         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 670         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 671         sd-uhs-sdr50;
 672         sd-uhs-sdr104;
 673         status = "okay";
 674 };
 675
 676 &sdhi1 {
 677         pinctrl-0 = <&sdhi1_pins>;
 678         pinctrl-1 = <&sdhi1_pins_uhs>;
 679         pinctrl-names = "default", "state_uhs";
 680
 681         vmmc-supply = <&vcc_sdhi1>;
 682         vqmmc-supply = <&vccq_sdhi1>;
 683         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 684         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 685         sd-uhs-sdr50;
 686         status = "okay";
 687 };
 688
 689 &sdhi2 {
 690         pinctrl-0 = <&sdhi2_pins>;
 691         pinctrl-1 = <&sdhi2_pins_uhs>;
 692         pinctrl-names = "default", "state_uhs";
 693
 694         vmmc-supply = <&vcc_sdhi2>;
 695         vqmmc-supply = <&vccq_sdhi2>;
 696         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 697         sd-uhs-sdr50;
 698         status = "okay";
 699 };
 700
 701 &qspi {
 702         pinctrl-0 = <&qspi_pins>;
 703         pinctrl-names = "default";
 704
 705         status = "okay";
 706
 707         flash: flash@0 {
 708                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 709                 reg = <0>;
 710                 spi-max-frequency = <30000000>;
 711                 spi-tx-bus-width = <4>;
 712                 spi-rx-bus-width = <4>;
 713                 spi-cpha;
 714                 spi-cpol;
 715                 m25p,fast-read;
 716
 717                 partitions {
 718                         compatible = "fixed-partitions";
 719                         #address-cells = <1>;
 720                         #size-cells = <1>;
 721
 722                         partition@0 {
 723                                 label = "loader";
 724                                 reg = <0x00000000 0x00080000>;
 725                                 read-only;
 726                         };
 727                         partition@80000 {
 728                                 label = "user";
 729                                 reg = <0x00080000 0x00580000>;
 730                                 read-only;
 731                         };
 732                         partition@600000 {
 733                                 label = "flash";
 734                                 reg = <0x00600000 0x03a00000>;
 735                         };
 736                 };
 737         };
 738 };
 739
 740 &msiof0 {
 741         pinctrl-0 = <&msiof0_pins>;
 742         pinctrl-names = "default";
 743
 744         status = "okay";
 745
 746         pmic: pmic@0 {
 747                 compatible = "renesas,r2a11302ft";
 748                 reg = <0>;
 749                 spi-max-frequency = <6000000>;
 750                 spi-cpol;
 751                 spi-cpha;
 752         };
 753 };
 754
 755 &i2c1 {
 756         pinctrl-0 = <&i2c1_pins>;
 757         pinctrl-names = "i2c-exio1";
 758 };
 759
 760 &i2c2 {
 761         pinctrl-0 = <&i2c2_pins>;
 762         pinctrl-names = "i2c-hdmi";
 763
 764         clock-frequency = <100000>;
 765 };
 766
 767 &i2c4 {
 768         pinctrl-0 = <&i2c4_pins>;
 769         pinctrl-names = "i2c-exio4";
 770 };
 771
 772 &i2c6 {
 773         status = "okay";
 774         clock-frequency = <100000>;
 775
 776         pmic@58 {
 777                 compatible = "dlg,da9063";
 778                 reg = <0x58>;
 779                 interrupt-parent = <&irqc0>;
 780                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 781                 interrupt-controller;
 782
 783                 rtc {
 784                         compatible = "dlg,da9063-rtc";
 785                 };
 786
 787                 wdt {
 788                         compatible = "dlg,da9063-watchdog";
 789                 };
 790         };
 791
 792         vdd_dvfs: regulator@68 {
 793                 compatible = "dlg,da9210";
 794                 reg = <0x68>;
 795                 interrupt-parent = <&irqc0>;
 796                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 797
 798                 regulator-min-microvolt = <1000000>;
 799                 regulator-max-microvolt = <1000000>;
 800                 regulator-boot-on;
 801                 regulator-always-on;
 802         };
 803 };
 804
 805 &pci0 {
 806         status = "okay";
 807         pinctrl-0 = <&usb0_pins>;
 808         pinctrl-names = "default";
 809 };
 810
 811 &pci1 {
 812         status = "okay";
 813         pinctrl-0 = <&usb1_pins>;
 814         pinctrl-names = "default";
 815 };
 816
 817 &hsusb {
 818         status = "okay";
 819         pinctrl-0 = <&usb0_pins>;
 820         pinctrl-names = "default";
 821         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 822 };
 823
 824 &usbphy {
 825         status = "okay";
 826 };
 827
 828 &pcie_bus_clk {
 829         clock-frequency = <100000000>;
 830 };
 831
 832 &pciec {
 833         status = "okay";
 834 };
 835
 836 &cpu0 {
 837         cpu0-supply = <&vdd_dvfs>;
 838 };
 839
 840 /* HDMI video input */
 841 &vin0 {
 842         status = "okay";
 843         pinctrl-0 = <&vin0_pins>;
 844         pinctrl-names = "default";
 845
 846         port {
 847                 #address-cells = <1>;
 848                 #size-cells = <0>;
 849
 850                 vin0ep2: endpoint {
 851                         remote-endpoint = <&adv7612_out>;
 852                         bus-width = <24>;
 853                         hsync-active = <0>;
 854                         vsync-active = <0>;
 855                         pclk-sample = <1>;
 856                         data-active = <1>;
 857                 };
 858         };
 859 };
 860
 861 /* composite video input */
 862 &vin1 {
 863         status = "okay";
 864         pinctrl-0 = <&vin1_pins>;
 865         pinctrl-names = "default";
 866
 867         port {
 868                 #address-cells = <1>;
 869                 #size-cells = <0>;
 870
 871                 vin1ep: endpoint {
 872                         remote-endpoint = <&adv7180>;
 873                         bus-width = <8>;
 874                 };
 875         };
 876 };
 877
 878 &rcar_sound {
 879         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 880         pinctrl-names = "default";
 881
 882         /* Single DAI */
 883         #sound-dai-cells = <0>;
 884
 885         status = "okay";
 886
 887         rcar_sound,dai {
 888                 dai0 {
 889                         playback = <&ssi0 &src2 &dvc0>;
 890                         capture  = <&ssi1 &src3 &dvc1>;
 891                 };
 892         };
 893 };
 894
 895 &ssi1 {
 896         shared-pin;
 897 };