arch/arm/boot/dts/nxp/imx/imx7s.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
   2 //
   3 // Copyright 2015 Freescale Semiconductor, Inc.
   4 // Copyright 2016 Toradex AG
   5
   6 #include <dt-bindings/clock/imx7d-clock.h>
   7 #include <dt-bindings/power/imx7-power.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/reset/imx7-reset.h>
  12 #include "imx7d-pinfunc.h"
  13
  14 / {
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         /*
  18          * The decompressor and also some bootloaders rely on a
  19          * pre-existing /chosen node to be available to insert the
  20          * command line and merge other ATAGS info.
  21          */
  22         chosen {};
  23
  24         aliases {
  25                 gpio0 = &gpio1;
  26                 gpio1 = &gpio2;
  27                 gpio2 = &gpio3;
  28                 gpio3 = &gpio4;
  29                 gpio4 = &gpio5;
  30                 gpio5 = &gpio6;
  31                 gpio6 = &gpio7;
  32                 i2c0 = &i2c1;
  33                 i2c1 = &i2c2;
  34                 i2c2 = &i2c3;
  35                 i2c3 = &i2c4;
  36                 mmc0 = &usdhc1;
  37                 mmc1 = &usdhc2;
  38                 mmc2 = &usdhc3;
  39                 serial0 = &uart1;
  40                 serial1 = &uart2;
  41                 serial2 = &uart3;
  42                 serial3 = &uart4;
  43                 serial4 = &uart5;
  44                 serial5 = &uart6;
  45                 serial6 = &uart7;
  46                 spi0 = &ecspi1;
  47                 spi1 = &ecspi2;
  48                 spi2 = &ecspi3;
  49                 spi3 = &ecspi4;
  50                 usb0 = &usbotg1;
  51                 usb1 = &usbh;
  52         };
  53
  54         cpus {
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57
  58                 idle-states {
  59                         entry-method = "psci";
  60
  61                         cpu_sleep_wait: cpu-sleep-wait {
  62                                 compatible = "arm,idle-state";
  63                                 arm,psci-suspend-param = <0x0010000>;
  64                                 local-timer-stop;
  65                                 entry-latency-us = <100>;
  66                                 exit-latency-us = <50>;
  67                                 min-residency-us = <1000>;
  68                         };
  69                 };
  70
  71                 cpu0: cpu@0 {
  72                         compatible = "arm,cortex-a7";
  73                         device_type = "cpu";
  74                         reg = <0>;
  75                         clock-frequency = <792000000>;
  76                         clock-latency = <61036>; /* two CLK32 periods */
  77                         clocks = <&clks IMX7D_CLK_ARM>;
  78                         cpu-idle-states = <&cpu_sleep_wait>;
  79                         operating-points-v2 = <&cpu0_opp_table>;
  80                         #cooling-cells = <2>;
  81                         nvmem-cells = <&fuse_grade>;
  82                         nvmem-cell-names = "speed_grade";
  83                 };
  84         };
  85
  86         cpu0_opp_table: opp-table {
  87                 compatible = "operating-points-v2";
  88                 opp-shared;
  89
  90                 opp-792000000 {
  91                         opp-hz = /bits/ 64 <792000000>;
  92                         opp-microvolt = <1000000>;
  93                         clock-latency-ns = <150000>;
  94                         opp-supported-hw = <0xf>, <0xf>;
  95                 };
  96         };
  97
  98         ckil: clock-cki {
  99                 compatible = "fixed-clock";
 100                 #clock-cells = <0>;
 101                 clock-frequency = <32768>;
 102                 clock-output-names = "ckil";
 103         };
 104
 105         osc: clock-osc {
 106                 compatible = "fixed-clock";
 107                 #clock-cells = <0>;
 108                 clock-frequency = <24000000>;
 109                 clock-output-names = "osc";
 110         };
 111
 112         usbphynop1: usbphynop1 {
 113                 compatible = "usb-nop-xceiv";
 114                 clocks = <&clks IMX7D_USB_PHY1_CLK>;
 115                 clock-names = "main_clk";
 116                 #phy-cells = <0>;
 117         };
 118
 119         usbphynop3: usbphynop3 {
 120                 compatible = "usb-nop-xceiv";
 121                 clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 122                 clock-names = "main_clk";
 123                 power-domains = <&pgc_hsic_phy>;
 124                 #phy-cells = <0>;
 125         };
 126
 127         pmu {
 128                 compatible = "arm,cortex-a7-pmu";
 129                 interrupt-parent = <&gpc>;
 130                 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 131                 interrupt-affinity = <&cpu0>;
 132         };
 133
 134         replicator {
 135                 /*
 136                  * non-configurable replicators don't show up on the
 137                  * AMBA bus.  As such no need to add "arm,primecell"
 138                  */
 139                 compatible = "arm,coresight-static-replicator";
 140
 141                 out-ports {
 142                         #address-cells = <1>;
 143                         #size-cells = <0>;
 144                                 /* replicator output ports */
 145                         port@0 {
 146                                 reg = <0>;
 147                                 replicator_out_port0: endpoint {
 148                                         remote-endpoint = <&tpiu_in_port>;
 149                                 };
 150                         };
 151
 152                         port@1 {
 153                                 reg = <1>;
 154                                 replicator_out_port1: endpoint {
 155                                         remote-endpoint = <&etr_in_port>;
 156                                 };
 157                         };
 158                 };
 159
 160                 in-ports {
 161                         port {
 162                                 replicator_in_port0: endpoint {
 163                                         remote-endpoint = <&etf_out_port>;
 164                                 };
 165                         };
 166                 };
 167         };
 168
 169         timer {
 170                 compatible = "arm,armv7-timer";
 171                 arm,cpu-registers-not-fw-configured;
 172                 interrupt-parent = <&intc>;
 173                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 174                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 175                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 176                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 177         };
 178
 179         soc: soc {
 180                 #address-cells = <1>;
 181                 #size-cells = <1>;
 182                 compatible = "simple-bus";
 183                 interrupt-parent = <&gpc>;
 184                 ranges;
 185
 186                 ocram: sram@900000 {
 187                         compatible = "mmio-sram";
 188                         reg = <0x00900000 0x20000>;
 189                         ranges = <0 0x00900000 0x20000>;
 190                         #address-cells = <1>;
 191                         #size-cells = <1>;
 192                         clocks = <&clks IMX7D_OCRAM_CLK>;
 193                 };
 194
 195                 funnel@30041000 {
 196                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 197                         reg = <0x30041000 0x1000>;
 198                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 199                         clock-names = "apb_pclk";
 200
 201                         ca_funnel_in_ports: in-ports {
 202                                 #address-cells = <1>;
 203                                 #size-cells = <0>;
 204
 205                                 port@0 {
 206                                         reg = <0>;
 207                                         ca_funnel_in_port0: endpoint {
 208                                                 remote-endpoint = <&etm0_out_port>;
 209                                         };
 210                                 };
 211
 212                                 /* the other input ports are not connect to anything */
 213                         };
 214
 215                         out-ports {
 216                                 port {
 217                                         ca_funnel_out_port0: endpoint {
 218                                                 remote-endpoint = <&hugo_funnel_in_port0>;
 219                                         };
 220                                 };
 221
 222                         };
 223                 };
 224
 225                 etm@3007c000 {
 226                         compatible = "arm,coresight-etm3x", "arm,primecell";
 227                         reg = <0x3007c000 0x1000>;
 228                         cpu = <&cpu0>;
 229                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 230                         clock-names = "apb_pclk";
 231
 232                         out-ports {
 233                                 port {
 234                                         etm0_out_port: endpoint {
 235                                                 remote-endpoint = <&ca_funnel_in_port0>;
 236                                         };
 237                                 };
 238                         };
 239                 };
 240
 241                 funnel@30083000 {
 242                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 243                         reg = <0x30083000 0x1000>;
 244                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 245                         clock-names = "apb_pclk";
 246
 247                         in-ports {
 248                                 #address-cells = <1>;
 249                                 #size-cells = <0>;
 250
 251                                 port@0 {
 252                                         reg = <0>;
 253                                         hugo_funnel_in_port0: endpoint {
 254                                                 remote-endpoint = <&ca_funnel_out_port0>;
 255                                         };
 256                                 };
 257
 258                                 port@1 {
 259                                         reg = <1>;
 260                                         hugo_funnel_in_port1: endpoint {
 261                                                 /* M4 input */
 262                                         };
 263                                 };
 264                                 /* the other input ports are not connect to anything */
 265                         };
 266
 267                         out-ports {
 268                                 port {
 269                                         hugo_funnel_out_port0: endpoint {
 270                                                 remote-endpoint = <&etf_in_port>;
 271                                         };
 272                                 };
 273                         };
 274                 };
 275
 276                 etf@30084000 {
 277                         compatible = "arm,coresight-tmc", "arm,primecell";
 278                         reg = <0x30084000 0x1000>;
 279                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 280                         clock-names = "apb_pclk";
 281
 282                         in-ports {
 283                                 port {
 284                                         etf_in_port: endpoint {
 285                                                 remote-endpoint = <&hugo_funnel_out_port0>;
 286                                         };
 287                                 };
 288                         };
 289
 290                         out-ports {
 291                                 port {
 292                                         etf_out_port: endpoint {
 293                                                 remote-endpoint = <&replicator_in_port0>;
 294                                         };
 295                                 };
 296                         };
 297                 };
 298
 299                 etr@30086000 {
 300                         compatible = "arm,coresight-tmc", "arm,primecell";
 301                         reg = <0x30086000 0x1000>;
 302                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 303                         clock-names = "apb_pclk";
 304
 305                         in-ports {
 306                                 port {
 307                                         etr_in_port: endpoint {
 308                                                 remote-endpoint = <&replicator_out_port1>;
 309                                         };
 310                                 };
 311                         };
 312                 };
 313
 314                 tpiu@30087000 {
 315                         compatible = "arm,coresight-tpiu", "arm,primecell";
 316                         reg = <0x30087000 0x1000>;
 317                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 318                         clock-names = "apb_pclk";
 319
 320                         in-ports {
 321                                 port {
 322                                         tpiu_in_port: endpoint {
 323                                                 remote-endpoint = <&replicator_out_port0>;
 324                                         };
 325                                 };
 326                         };
 327                 };
 328
 329                 intc: interrupt-controller@31001000 {
 330                         compatible = "arm,cortex-a7-gic";
 331                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 332                         #interrupt-cells = <3>;
 333                         interrupt-controller;
 334                         interrupt-parent = <&intc>;
 335                         reg = <0x31001000 0x1000>,
 336                               <0x31002000 0x2000>,
 337                               <0x31004000 0x2000>,
 338                               <0x31006000 0x2000>;
 339                 };
 340
 341                 aips1: bus@30000000 {
 342                         compatible = "fsl,aips-bus", "simple-bus";
 343                         #address-cells = <1>;
 344                         #size-cells = <1>;
 345                         reg = <0x30000000 0x400000>;
 346                         ranges;
 347
 348                         gpio1: gpio@30200000 {
 349                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 350                                 reg = <0x30200000 0x10000>;
 351                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
 352                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
 353                                 gpio-controller;
 354                                 #gpio-cells = <2>;
 355                                 interrupt-controller;
 356                                 #interrupt-cells = <2>;
 357                                 gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
 358                         };
 359
 360                         gpio2: gpio@30210000 {
 361                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 362                                 reg = <0x30210000 0x10000>;
 363                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 364                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 365                                 gpio-controller;
 366                                 #gpio-cells = <2>;
 367                                 interrupt-controller;
 368                                 #interrupt-cells = <2>;
 369                                 gpio-ranges = <&iomuxc 0 13 32>;
 370                         };
 371
 372                         gpio3: gpio@30220000 {
 373                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 374                                 reg = <0x30220000 0x10000>;
 375                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 376                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 377                                 gpio-controller;
 378                                 #gpio-cells = <2>;
 379                                 interrupt-controller;
 380                                 #interrupt-cells = <2>;
 381                                 gpio-ranges = <&iomuxc 0 45 29>;
 382                         };
 383
 384                         gpio4: gpio@30230000 {
 385                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 386                                 reg = <0x30230000 0x10000>;
 387                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 388                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 389                                 gpio-controller;
 390                                 #gpio-cells = <2>;
 391                                 interrupt-controller;
 392                                 #interrupt-cells = <2>;
 393                                 gpio-ranges = <&iomuxc 0 74 24>;
 394                         };
 395
 396                         gpio5: gpio@30240000 {
 397                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 398                                 reg = <0x30240000 0x10000>;
 399                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 400                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 401                                 gpio-controller;
 402                                 #gpio-cells = <2>;
 403                                 interrupt-controller;
 404                                 #interrupt-cells = <2>;
 405                                 gpio-ranges = <&iomuxc 0 98 18>;
 406                         };
 407
 408                         gpio6: gpio@30250000 {
 409                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 410                                 reg = <0x30250000 0x10000>;
 411                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 412                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 413                                 gpio-controller;
 414                                 #gpio-cells = <2>;
 415                                 interrupt-controller;
 416                                 #interrupt-cells = <2>;
 417                                 gpio-ranges = <&iomuxc 0 116 23>;
 418                         };
 419
 420                         gpio7: gpio@30260000 {
 421                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 422                                 reg = <0x30260000 0x10000>;
 423                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 424                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 425                                 gpio-controller;
 426                                 #gpio-cells = <2>;
 427                                 interrupt-controller;
 428                                 #interrupt-cells = <2>;
 429                                 gpio-ranges = <&iomuxc 0 139 16>;
 430                         };
 431
 432                         wdog1: watchdog@30280000 {
 433                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 434                                 reg = <0x30280000 0x10000>;
 435                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 436                                 clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
 437                         };
 438
 439                         wdog2: watchdog@30290000 {
 440                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 441                                 reg = <0x30290000 0x10000>;
 442                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 443                                 clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
 444                                 status = "disabled";
 445                         };
 446
 447                         wdog3: watchdog@302a0000 {
 448                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 449                                 reg = <0x302a0000 0x10000>;
 450                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 451                                 clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
 452                                 status = "disabled";
 453                         };
 454
 455                         wdog4: watchdog@302b0000 {
 456                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 457                                 reg = <0x302b0000 0x10000>;
 458                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 459                                 clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
 460                                 status = "disabled";
 461                         };
 462
 463                         iomuxc_lpsr: pinctrl@302c0000 {
 464                                 compatible = "fsl,imx7d-iomuxc-lpsr";
 465                                 reg = <0x302c0000 0x10000>;
 466                                 fsl,input-sel = <&iomuxc>;
 467                         };
 468
 469                         gpt1: timer@302d0000 {
 470                                 compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 471                                 reg = <0x302d0000 0x10000>;
 472                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 473                                 clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
 474                                          <&clks IMX7D_GPT1_ROOT_CLK>;
 475                                 clock-names = "ipg", "per";
 476                         };
 477
 478                         gpt2: timer@302e0000 {
 479                                 compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 480                                 reg = <0x302e0000 0x10000>;
 481                                 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 482                                 clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
 483                                          <&clks IMX7D_GPT2_ROOT_CLK>;
 484                                 clock-names = "ipg", "per";
 485                                 status = "disabled";
 486                         };
 487
 488                         gpt3: timer@302f0000 {
 489                                 compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 490                                 reg = <0x302f0000 0x10000>;
 491                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 492                                 clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
 493                                          <&clks IMX7D_GPT3_ROOT_CLK>;
 494                                 clock-names = "ipg", "per";
 495                                 status = "disabled";
 496                         };
 497
 498                         gpt4: timer@30300000 {
 499                                 compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 500                                 reg = <0x30300000 0x10000>;
 501                                 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 502                                 clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
 503                                          <&clks IMX7D_GPT4_ROOT_CLK>;
 504                                 clock-names = "ipg", "per";
 505                                 status = "disabled";
 506                         };
 507
 508                         kpp: keypad@30320000 {
 509                                 compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
 510                                 reg = <0x30320000 0x10000>;
 511                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 512                                 clocks = <&clks IMX7D_KPP_ROOT_CLK>;
 513                                 status = "disabled";
 514                         };
 515
 516                         iomuxc: pinctrl@30330000 {
 517                                 compatible = "fsl,imx7d-iomuxc";
 518                                 reg = <0x30330000 0x10000>;
 519                         };
 520
 521                         gpr: iomuxc-gpr@30340000 {
 522                                 compatible = "fsl,imx7d-iomuxc-gpr",
 523                                         "fsl,imx6q-iomuxc-gpr", "syscon",
 524                                         "simple-mfd";
 525                                 reg = <0x30340000 0x10000>;
 526
 527                                 mux: mux-controller {
 528                                         compatible = "mmio-mux";
 529                                         #mux-control-cells = <1>;
 530                                         mux-reg-masks = <0x14 0x00000010>;
 531                                 };
 532
 533                                 video_mux: csi-mux {
 534                                         compatible = "video-mux";
 535                                         mux-controls = <&mux 0>;
 536                                         #address-cells = <1>;
 537                                         #size-cells = <0>;
 538                                         status = "disabled";
 539
 540                                         port@0 {
 541                                                 reg = <0>;
 542                                         };
 543
 544                                         port@1 {
 545                                                 reg = <1>;
 546
 547                                                 csi_mux_from_mipi_vc0: endpoint {
 548                                                         remote-endpoint = <&mipi_vc0_to_csi_mux>;
 549                                                 };
 550                                         };
 551
 552                                         port@2 {
 553                                                 reg = <2>;
 554
 555                                                 csi_mux_to_csi: endpoint {
 556                                                         remote-endpoint = <&csi_from_csi_mux>;
 557                                                 };
 558                                         };
 559                                 };
 560                         };
 561
 562                         ocotp: efuse@30350000 {
 563                                 #address-cells = <1>;
 564                                 #size-cells = <1>;
 565                                 compatible = "fsl,imx7d-ocotp", "syscon";
 566                                 reg = <0x30350000 0x10000>;
 567                                 clocks = <&clks IMX7D_OCOTP_CLK>;
 568
 569                                 tempmon_calib: calib@3c {
 570                                         reg = <0x3c 0x4>;
 571                                 };
 572
 573                                 fuse_grade: fuse-grade@10 {
 574                                         reg = <0x10 0x4>;
 575                                 };
 576                         };
 577
 578                         anatop: anatop@30360000 {
 579                                 compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
 580                                         "syscon", "simple-mfd";
 581                                 reg = <0x30360000 0x10000>;
 582                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 583                                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 584
 585                                 reg_1p0d: regulator-vdd1p0d {
 586                                         compatible = "fsl,anatop-regulator";
 587                                         regulator-name = "vdd1p0d";
 588                                         regulator-min-microvolt = <800000>;
 589                                         regulator-max-microvolt = <1200000>;
 590                                         anatop-reg-offset = <0x210>;
 591                                         anatop-vol-bit-shift = <8>;
 592                                         anatop-vol-bit-width = <5>;
 593                                         anatop-min-bit-val = <8>;
 594                                         anatop-min-voltage = <800000>;
 595                                         anatop-max-voltage = <1200000>;
 596                                         anatop-enable-bit = <0>;
 597                                 };
 598
 599                                 reg_1p2: regulator-vdd1p2 {
 600                                         compatible = "fsl,anatop-regulator";
 601                                         regulator-name = "vdd1p2";
 602                                         regulator-min-microvolt = <1100000>;
 603                                         regulator-max-microvolt = <1300000>;
 604                                         anatop-reg-offset = <0x220>;
 605                                         anatop-vol-bit-shift = <8>;
 606                                         anatop-vol-bit-width = <5>;
 607                                         anatop-min-bit-val = <0x14>;
 608                                         anatop-min-voltage = <1100000>;
 609                                         anatop-max-voltage = <1300000>;
 610                                         anatop-enable-bit = <0>;
 611                                 };
 612
 613                                 tempmon: tempmon {
 614                                         compatible = "fsl,imx7d-tempmon";
 615                                         interrupt-parent = <&gpc>;
 616                                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 617                                         fsl,tempmon = <&anatop>;
 618                                         nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
 619                                         nvmem-cell-names = "calib", "temp_grade";
 620                                         clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
 621                                         #thermal-sensor-cells = <0>;
 622                                 };
 623                         };
 624
 625                         snvs: snvs@30370000 {
 626                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 627                                 reg = <0x30370000 0x10000>;
 628
 629                                 snvs_rtc: snvs-rtc-lp {
 630                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 631                                         regmap = <&snvs>;
 632                                         offset = <0x34>;
 633                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 634                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 635                                         clocks = <&clks IMX7D_SNVS_CLK>;
 636                                         clock-names = "snvs-rtc";
 637                                 };
 638
 639                                 snvs_pwrkey: snvs-powerkey {
 640                                         compatible = "fsl,sec-v4.0-pwrkey";
 641                                         regmap = <&snvs>;
 642                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 643                                         clocks = <&clks IMX7D_SNVS_CLK>;
 644                                         clock-names = "snvs-pwrkey";
 645                                         linux,keycode = <KEY_POWER>;
 646                                         wakeup-source;
 647                                         status = "disabled";
 648                                 };
 649                         };
 650
 651                         clks: clock-controller@30380000 {
 652                                 compatible = "fsl,imx7d-ccm";
 653                                 reg = <0x30380000 0x10000>;
 654                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 655                                              <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 656                                 #clock-cells = <1>;
 657                                 clocks = <&ckil>, <&osc>;
 658                                 clock-names = "ckil", "osc";
 659                         };
 660
 661                         src: reset-controller@30390000 {
 662                                 compatible = "fsl,imx7d-src", "syscon";
 663                                 reg = <0x30390000 0x10000>;
 664                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 665                                 #reset-cells = <1>;
 666                         };
 667
 668                         gpc: gpc@303a0000 {
 669                                 compatible = "fsl,imx7d-gpc";
 670                                 reg = <0x303a0000 0x10000>;
 671                                 interrupt-controller;
 672                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 673                                 #interrupt-cells = <3>;
 674                                 interrupt-parent = <&intc>;
 675
 676                                 pgc {
 677                                         #address-cells = <1>;
 678                                         #size-cells = <0>;
 679
 680                                         pgc_mipi_phy: power-domain@0 {
 681                                                 #power-domain-cells = <0>;
 682                                                 reg = <0>;
 683                                                 power-supply = <&reg_1p0d>;
 684                                         };
 685
 686                                         pgc_pcie_phy: power-domain@1 {
 687                                                 #power-domain-cells = <0>;
 688                                                 reg = <1>;
 689                                                 power-supply = <&reg_1p0d>;
 690                                         };
 691
 692                                         pgc_hsic_phy: power-domain@2 {
 693                                                 #power-domain-cells = <0>;
 694                                                 reg = <2>;
 695                                                 power-supply = <&reg_1p2>;
 696                                         };
 697                                 };
 698                         };
 699                 };
 700
 701                 aips2: bus@30400000 {
 702                         compatible = "fsl,aips-bus", "simple-bus";
 703                         #address-cells = <1>;
 704                         #size-cells = <1>;
 705                         reg = <0x30400000 0x400000>;
 706                         ranges;
 707
 708                         adc1: adc@30610000 {
 709                                 compatible = "fsl,imx7d-adc";
 710                                 reg = <0x30610000 0x10000>;
 711                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 712                                 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
 713                                 clock-names = "adc";
 714                                 #io-channel-cells = <1>;
 715                                 status = "disabled";
 716                         };
 717
 718                         adc2: adc@30620000 {
 719                                 compatible = "fsl,imx7d-adc";
 720                                 reg = <0x30620000 0x10000>;
 721                                 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 722                                 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
 723                                 clock-names = "adc";
 724                                 #io-channel-cells = <1>;
 725                                 status = "disabled";
 726                         };
 727
 728                         ecspi4: spi@30630000 {
 729                                 #address-cells = <1>;
 730                                 #size-cells = <0>;
 731                                 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 732                                 reg = <0x30630000 0x10000>;
 733                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 734                                 clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 735                                         <&clks IMX7D_ECSPI4_ROOT_CLK>;
 736                                 clock-names = "ipg", "per";
 737                                 dma-names = "rx", "tx";
 738                                 dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 739                                 status = "disabled";
 740                         };
 741
 742                         ftm1: pwm@30640000 {
 743                                 compatible = "fsl,vf610-ftm-pwm";
 744                                 reg = <0x30640000 0x10000>;
 745                                 #pwm-cells = <3>;
 746                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 747                                 clock-names = "ftm_sys", "ftm_ext",
 748                                 "ftm_fix", "ftm_cnt_clk_en";
 749                                 clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
 750                                         <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
 751                                         <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
 752                                         <&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
 753                                 status = "disabled";
 754                         };
 755
 756                         ftm2: pwm@30650000 {
 757                                 compatible = "fsl,vf610-ftm-pwm";
 758                                 reg = <0x30650000 0x10000>;
 759                                 #pwm-cells = <3>;
 760                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 761                                 clock-names = "ftm_sys", "ftm_ext",
 762                                 "ftm_fix", "ftm_cnt_clk_en";
 763                                 clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
 764                                         <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
 765                                         <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
 766                                         <&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
 767                                 status = "disabled";
 768                         };
 769
 770                         pwm1: pwm@30660000 {
 771                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 772                                 reg = <0x30660000 0x10000>;
 773                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 774                                 clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
 775                                          <&clks IMX7D_PWM1_ROOT_CLK>;
 776                                 clock-names = "ipg", "per";
 777                                 #pwm-cells = <3>;
 778                                 status = "disabled";
 779                         };
 780
 781                         pwm2: pwm@30670000 {
 782                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 783                                 reg = <0x30670000 0x10000>;
 784                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 785                                 clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
 786                                          <&clks IMX7D_PWM2_ROOT_CLK>;
 787                                 clock-names = "ipg", "per";
 788                                 #pwm-cells = <3>;
 789                                 status = "disabled";
 790                         };
 791
 792                         pwm3: pwm@30680000 {
 793                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 794                                 reg = <0x30680000 0x10000>;
 795                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 796                                 clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
 797                                          <&clks IMX7D_PWM3_ROOT_CLK>;
 798                                 clock-names = "ipg", "per";
 799                                 #pwm-cells = <3>;
 800                                 status = "disabled";
 801                         };
 802
 803                         pwm4: pwm@30690000 {
 804                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 805                                 reg = <0x30690000 0x10000>;
 806                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 807                                 clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
 808                                          <&clks IMX7D_PWM4_ROOT_CLK>;
 809                                 clock-names = "ipg", "per";
 810                                 #pwm-cells = <3>;
 811                                 status = "disabled";
 812                         };
 813
 814                         csi: csi@30710000 {
 815                                 compatible = "fsl,imx7-csi";
 816                                 reg = <0x30710000 0x10000>;
 817                                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 818                                 clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
 819                                 clock-names = "mclk";
 820                                 status = "disabled";
 821
 822                                 port {
 823                                         csi_from_csi_mux: endpoint {
 824                                                 remote-endpoint = <&csi_mux_to_csi>;
 825                                         };
 826                                 };
 827                         };
 828
 829                         lcdif: lcdif@30730000 {
 830                                 compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 831                                 reg = <0x30730000 0x10000>;
 832                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 833                                 clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
 834                                         <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
 835                                 clock-names = "pix", "axi";
 836                                 status = "disabled";
 837                         };
 838
 839                         mipi_csi: mipi-csi@30750000 {
 840                                 compatible = "fsl,imx7-mipi-csi2";
 841                                 reg = <0x30750000 0x10000>;
 842                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 843                                 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
 844                                          <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
 845                                          <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
 846                                 clock-names = "pclk", "wrap", "phy";
 847                                 power-domains = <&pgc_mipi_phy>;
 848                                 phy-supply = <&reg_1p0d>;
 849                                 resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
 850                                 status = "disabled";
 851
 852                                 ports {
 853                                         #address-cells = <1>;
 854                                         #size-cells = <0>;
 855
 856                                         port@0 {
 857                                                 reg = <0>;
 858                                         };
 859
 860                                         port@1 {
 861                                                 reg = <1>;
 862
 863                                                 mipi_vc0_to_csi_mux: endpoint {
 864                                                         remote-endpoint = <&csi_mux_from_mipi_vc0>;
 865                                                 };
 866                                         };
 867                                 };
 868                         };
 869
 870                         mipi_dsi: dsi@30760000 {
 871                                 compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
 872                                 #address-cells = <1>;
 873                                 #size-cells = <0>;
 874                                 reg = <0x30760000 0x400>;
 875                                 clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
 876                                          <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
 877                                 clock-names = "bus_clk", "sclk_mipi";
 878                                 assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
 879                                                   <&clks IMX7D_PLL_SYS_PFD5_CLK>;
 880                                 assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
 881                                 assigned-clock-rates = <0>, <333000000>;
 882                                 power-domains = <&pgc_mipi_phy>;
 883                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 884                                 samsung,burst-clock-frequency = <891000000>;
 885                                 samsung,esc-clock-frequency = <20000000>;
 886                                 samsung,pll-clock-frequency = <24000000>;
 887                                 status = "disabled";
 888                         };
 889                 };
 890
 891                 aips3: bus@30800000 {
 892                         compatible = "fsl,aips-bus", "simple-bus";
 893                         #address-cells = <1>;
 894                         #size-cells = <1>;
 895                         reg = <0x30800000 0x400000>;
 896                         ranges;
 897
 898                         spba-bus@30800000 {
 899                                 compatible = "fsl,spba-bus", "simple-bus";
 900                                 #address-cells = <1>;
 901                                 #size-cells = <1>;
 902                                 reg = <0x30800000 0x100000>;
 903                                 ranges;
 904
 905                                 ecspi1: spi@30820000 {
 906                                         #address-cells = <1>;
 907                                         #size-cells = <0>;
 908                                         compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 909                                         reg = <0x30820000 0x10000>;
 910                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 911                                         clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 912                                                 <&clks IMX7D_ECSPI1_ROOT_CLK>;
 913                                         clock-names = "ipg", "per";
 914                                         dma-names = "rx", "tx";
 915                                         dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 916                                         status = "disabled";
 917                                 };
 918
 919                                 ecspi2: spi@30830000 {
 920                                         #address-cells = <1>;
 921                                         #size-cells = <0>;
 922                                         compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 923                                         reg = <0x30830000 0x10000>;
 924                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 925                                         clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 926                                                 <&clks IMX7D_ECSPI2_ROOT_CLK>;
 927                                         clock-names = "ipg", "per";
 928                                         dma-names = "rx", "tx";
 929                                         dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 930                                         status = "disabled";
 931                                 };
 932
 933                                 ecspi3: spi@30840000 {
 934                                         #address-cells = <1>;
 935                                         #size-cells = <0>;
 936                                         compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 937                                         reg = <0x30840000 0x10000>;
 938                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 939                                         clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 940                                                 <&clks IMX7D_ECSPI3_ROOT_CLK>;
 941                                         clock-names = "ipg", "per";
 942                                         dma-names = "rx", "tx";
 943                                         dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 944                                         status = "disabled";
 945                                 };
 946
 947                                 uart1: serial@30860000 {
 948                                         compatible = "fsl,imx7d-uart",
 949                                                      "fsl,imx6q-uart";
 950                                         reg = <0x30860000 0x10000>;
 951                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 952                                         clocks = <&clks IMX7D_UART1_ROOT_CLK>,
 953                                                 <&clks IMX7D_UART1_ROOT_CLK>;
 954                                         clock-names = "ipg", "per";
 955                                         status = "disabled";
 956                                 };
 957
 958                                 uart2: serial@30890000 {
 959                                         compatible = "fsl,imx7d-uart",
 960                                                      "fsl,imx6q-uart";
 961                                         reg = <0x30890000 0x10000>;
 962                                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 963                                         clocks = <&clks IMX7D_UART2_ROOT_CLK>,
 964                                                 <&clks IMX7D_UART2_ROOT_CLK>;
 965                                         clock-names = "ipg", "per";
 966                                         status = "disabled";
 967                                 };
 968
 969                                 uart3: serial@30880000 {
 970                                         compatible = "fsl,imx7d-uart",
 971                                                      "fsl,imx6q-uart";
 972                                         reg = <0x30880000 0x10000>;
 973                                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 974                                         clocks = <&clks IMX7D_UART3_ROOT_CLK>,
 975                                                 <&clks IMX7D_UART3_ROOT_CLK>;
 976                                         clock-names = "ipg", "per";
 977                                         status = "disabled";
 978                                 };
 979
 980                                 sai1: sai@308a0000 {
 981                                         #sound-dai-cells = <0>;
 982                                         compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
 983                                         reg = <0x308a0000 0x10000>;
 984                                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 985                                         clocks = <&clks IMX7D_SAI1_IPG_CLK>,
 986                                                  <&clks IMX7D_SAI1_ROOT_CLK>,
 987                                                  <&clks IMX7D_CLK_DUMMY>,
 988                                                  <&clks IMX7D_CLK_DUMMY>;
 989                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 990                                         dma-names = "rx", "tx";
 991                                         dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
 992                                         status = "disabled";
 993                                 };
 994
 995                                 sai2: sai@308b0000 {
 996                                         #sound-dai-cells = <0>;
 997                                         compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
 998                                         reg = <0x308b0000 0x10000>;
 999                                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1000                                         clocks = <&clks IMX7D_SAI2_IPG_CLK>,
1001                                                  <&clks IMX7D_SAI2_ROOT_CLK>,
1002                                                  <&clks IMX7D_CLK_DUMMY>,
1003                                                  <&clks IMX7D_CLK_DUMMY>;
1004                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
1005                                         dma-names = "rx", "tx";
1006                                         dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
1007                                         status = "disabled";
1008                                 };
1009
1010                                 sai3: sai@308c0000 {
1011                                         #sound-dai-cells = <0>;
1012                                         compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
1013                                         reg = <0x308c0000 0x10000>;
1014                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
1015                                         clocks = <&clks IMX7D_SAI3_IPG_CLK>,
1016                                                  <&clks IMX7D_SAI3_ROOT_CLK>,
1017                                                  <&clks IMX7D_CLK_DUMMY>,
1018                                                  <&clks IMX7D_CLK_DUMMY>;
1019                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
1020                                         dma-names = "rx", "tx";
1021                                         dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
1022                                         status = "disabled";
1023                                 };
1024                         };
1025
1026                         crypto: crypto@30900000 {
1027                                 compatible = "fsl,sec-v4.0";
1028                                 #address-cells = <1>;
1029                                 #size-cells = <1>;
1030                                 reg = <0x30900000 0x40000>;
1031                                 ranges = <0 0x30900000 0x40000>;
1032                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1033                                 clocks = <&clks IMX7D_CAAM_CLK>,
1034                                          <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
1035                                 clock-names = "ipg", "aclk";
1036
1037                                 sec_jr0: jr@1000 {
1038                                         compatible = "fsl,sec-v4.0-job-ring";
1039                                         reg = <0x1000 0x1000>;
1040                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1041                                 };
1042
1043                                 sec_jr1: jr@2000 {
1044                                         compatible = "fsl,sec-v4.0-job-ring";
1045                                         reg = <0x2000 0x1000>;
1046                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1047                                 };
1048
1049                                 sec_jr2: jr@3000 {
1050                                         compatible = "fsl,sec-v4.0-job-ring";
1051                                         reg = <0x3000 0x1000>;
1052                                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1053                                 };
1054                         };
1055
1056                         flexcan1: can@30a00000 {
1057                                 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
1058                                 reg = <0x30a00000 0x10000>;
1059                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
1060                                 clocks = <&clks IMX7D_CLK_DUMMY>,
1061                                         <&clks IMX7D_CAN1_ROOT_CLK>;
1062                                 clock-names = "ipg", "per";
1063                                 fsl,stop-mode = <&gpr 0x10 1>;
1064                                 status = "disabled";
1065                         };
1066
1067                         flexcan2: can@30a10000 {
1068                                 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
1069                                 reg = <0x30a10000 0x10000>;
1070                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
1071                                 clocks = <&clks IMX7D_CLK_DUMMY>,
1072                                         <&clks IMX7D_CAN2_ROOT_CLK>;
1073                                 clock-names = "ipg", "per";
1074                                 fsl,stop-mode = <&gpr 0x10 2>;
1075                                 status = "disabled";
1076                         };
1077
1078                         i2c1: i2c@30a20000 {
1079                                 #address-cells = <1>;
1080                                 #size-cells = <0>;
1081                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1082                                 reg = <0x30a20000 0x10000>;
1083                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1084                                 clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
1085                                 status = "disabled";
1086                         };
1087
1088                         i2c2: i2c@30a30000 {
1089                                 #address-cells = <1>;
1090                                 #size-cells = <0>;
1091                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1092                                 reg = <0x30a30000 0x10000>;
1093                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1094                                 clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
1095                                 status = "disabled";
1096                         };
1097
1098                         i2c3: i2c@30a40000 {
1099                                 #address-cells = <1>;
1100                                 #size-cells = <0>;
1101                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1102                                 reg = <0x30a40000 0x10000>;
1103                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1104                                 clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
1105                                 status = "disabled";
1106                         };
1107
1108                         i2c4: i2c@30a50000 {
1109                                 #address-cells = <1>;
1110                                 #size-cells = <0>;
1111                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
1112                                 reg = <0x30a50000 0x10000>;
1113                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1114                                 clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
1115                                 status = "disabled";
1116                         };
1117
1118                         uart4: serial@30a60000 {
1119                                 compatible = "fsl,imx7d-uart",
1120                                              "fsl,imx6q-uart";
1121                                 reg = <0x30a60000 0x10000>;
1122                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1123                                 clocks = <&clks IMX7D_UART4_ROOT_CLK>,
1124                                         <&clks IMX7D_UART4_ROOT_CLK>;
1125                                 clock-names = "ipg", "per";
1126                                 status = "disabled";
1127                         };
1128
1129                         uart5: serial@30a70000 {
1130                                 compatible = "fsl,imx7d-uart",
1131                                              "fsl,imx6q-uart";
1132                                 reg = <0x30a70000 0x10000>;
1133                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1134                                 clocks = <&clks IMX7D_UART5_ROOT_CLK>,
1135                                         <&clks IMX7D_UART5_ROOT_CLK>;
1136                                 clock-names = "ipg", "per";
1137                                 status = "disabled";
1138                         };
1139
1140                         uart6: serial@30a80000 {
1141                                 compatible = "fsl,imx7d-uart",
1142                                              "fsl,imx6q-uart";
1143                                 reg = <0x30a80000 0x10000>;
1144                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1145                                 clocks = <&clks IMX7D_UART6_ROOT_CLK>,
1146                                         <&clks IMX7D_UART6_ROOT_CLK>;
1147                                 clock-names = "ipg", "per";
1148                                 status = "disabled";
1149                         };
1150
1151                         uart7: serial@30a90000 {
1152                                 compatible = "fsl,imx7d-uart",
1153                                              "fsl,imx6q-uart";
1154                                 reg = <0x30a90000 0x10000>;
1155                                 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
1156                                 clocks = <&clks IMX7D_UART7_ROOT_CLK>,
1157                                         <&clks IMX7D_UART7_ROOT_CLK>;
1158                                 clock-names = "ipg", "per";
1159                                 status = "disabled";
1160                         };
1161
1162                         mu0a: mailbox@30aa0000 {
1163                                 compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
1164                                 reg = <0x30aa0000 0x10000>;
1165                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1166                                 clocks = <&clks IMX7D_MU_ROOT_CLK>;
1167                                 #mbox-cells = <2>;
1168                                 status = "disabled";
1169                         };
1170
1171                         mu0b: mailbox@30ab0000 {
1172                                 compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
1173                                 reg = <0x30ab0000 0x10000>;
1174                                 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1175                                 clocks = <&clks IMX7D_MU_ROOT_CLK>;
1176                                 #mbox-cells = <2>;
1177                                 fsl,mu-side-b;
1178                                 status = "disabled";
1179                         };
1180
1181                         usbotg1: usb@30b10000 {
1182                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
1183                                 reg = <0x30b10000 0x200>;
1184                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1185                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
1186                                 fsl,usbphy = <&usbphynop1>;
1187                                 fsl,usbmisc = <&usbmisc1 0>;
1188                                 phy-clkgate-delay-us = <400>;
1189                                 status = "disabled";
1190                         };
1191
1192                         usbh: usb@30b30000 {
1193                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
1194                                 reg = <0x30b30000 0x200>;
1195                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1196                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
1197                                 fsl,usbphy = <&usbphynop3>;
1198                                 fsl,usbmisc = <&usbmisc3 0>;
1199                                 phy_type = "hsic";
1200                                 dr_mode = "host";
1201                                 phy-clkgate-delay-us = <400>;
1202                                 status = "disabled";
1203                         };
1204
1205                         usbmisc1: usbmisc@30b10200 {
1206                                 #index-cells = <1>;
1207                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
1208                                 reg = <0x30b10200 0x200>;
1209                         };
1210
1211                         usbmisc3: usbmisc@30b30200 {
1212                                 #index-cells = <1>;
1213                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
1214                                 reg = <0x30b30200 0x200>;
1215                         };
1216
1217                         usdhc1: mmc@30b40000 {
1218                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1219                                 reg = <0x30b40000 0x10000>;
1220                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1221                                 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1222                                         <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1223                                         <&clks IMX7D_USDHC1_ROOT_CLK>;
1224                                 clock-names = "ipg", "ahb", "per";
1225                                 bus-width = <4>;
1226                                 fsl,tuning-step = <2>;
1227                                 fsl,tuning-start-tap = <20>;
1228                                 status = "disabled";
1229                         };
1230
1231                         usdhc2: mmc@30b50000 {
1232                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1233                                 reg = <0x30b50000 0x10000>;
1234                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1235                                 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1236                                         <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1237                                         <&clks IMX7D_USDHC2_ROOT_CLK>;
1238                                 clock-names = "ipg", "ahb", "per";
1239                                 bus-width = <4>;
1240                                 fsl,tuning-step = <2>;
1241                                 fsl,tuning-start-tap = <20>;
1242                                 status = "disabled";
1243                         };
1244
1245                         usdhc3: mmc@30b60000 {
1246                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
1247                                 reg = <0x30b60000 0x10000>;
1248                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1249                                 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1250                                         <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
1251                                         <&clks IMX7D_USDHC3_ROOT_CLK>;
1252                                 clock-names = "ipg", "ahb", "per";
1253                                 bus-width = <4>;
1254                                 fsl,tuning-step = <2>;
1255                                 fsl,tuning-start-tap = <20>;
1256                                 status = "disabled";
1257                         };
1258
1259                         qspi: spi@30bb0000 {
1260                                 compatible = "fsl,imx7d-qspi";
1261                                 reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
1262                                 reg-names = "QuadSPI", "QuadSPI-memory";
1263                                 #address-cells = <1>;
1264                                 #size-cells = <0>;
1265                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1266                                 clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
1267                                         <&clks IMX7D_QSPI_ROOT_CLK>;
1268                                 clock-names = "qspi_en", "qspi";
1269                                 status = "disabled";
1270                         };
1271
1272                         sdma: dma-controller@30bd0000 {
1273                                 compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
1274                                 reg = <0x30bd0000 0x10000>;
1275                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1276                                 clocks = <&clks IMX7D_IPG_ROOT_CLK>,
1277                                          <&clks IMX7D_SDMA_CORE_CLK>;
1278                                 clock-names = "ipg", "ahb";
1279                                 #dma-cells = <3>;
1280                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1281                         };
1282
1283                         fec1: ethernet@30be0000 {
1284                                 compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
1285                                 reg = <0x30be0000 0x10000>;
1286                                 interrupt-names = "int0", "int1", "int2", "pps";
1287                                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1288                                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1289                                         <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1290                                         <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1291                                 clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
1292                                         <&clks IMX7D_ENET_AXI_ROOT_CLK>,
1293                                         <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
1294                                         <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
1295                                         <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
1296                                 clock-names = "ipg", "ahb", "ptp",
1297                                         "enet_clk_ref", "enet_out";
1298                                 fsl,num-tx-queues = <3>;
1299                                 fsl,num-rx-queues = <3>;
1300                                 fsl,stop-mode = <&gpr 0x10 3>;
1301                                 status = "disabled";
1302                         };
1303                 };
1304
1305                 dma_apbh: dma-controller@33000000 {
1306                         compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1307                         reg = <0x33000000 0x2000>;
1308                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1309                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1310                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1311                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1312                         #dma-cells = <1>;
1313                         dma-channels = <4>;
1314                         clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
1315                 };
1316
1317                 gpmi: nand-controller@33002000 {
1318                         compatible = "fsl,imx7d-gpmi-nand";
1319                         #address-cells = <1>;
1320                         #size-cells = <0>;
1321                         reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1322                         reg-names = "gpmi-nand", "bch";
1323                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1324                         interrupt-names = "bch";
1325                         clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
1326                                 <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
1327                         clock-names = "gpmi_io", "gpmi_bch_apb";
1328                         dmas = <&dma_apbh 0>;
1329                         dma-names = "rx-tx";
1330                         status = "disabled";
1331                         assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
1332                         assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
1333                 };
1334         };
1335 };