2 * Copyright 2014-2017 Toradex AG
3 * Copyright 2012 Freescale Semiconductor, Inc.
4 * Copyright 2011 Linaro Ltd.
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * version 2 as published by the Free Software Foundation.
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
46 #include <dt-bindings/gpio/gpio.h>
47 #include <dt-bindings/input/input.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
50 #include "imx6qdl-apalis.dtsi"
53 model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
54 compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
66 compatible = "gpio-keys";
67 pinctrl-names = "default";
68 pinctrl-0 = <&pinctrl_gpio_keys>;
72 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_WAKEUP>;
74 debounce-interval = <10>;
79 lcd_display: display@di0 {
80 compatible = "fsl,imx-parallel-display";
83 interface-pix-fmt = "rgb24";
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_ipu1_lcdif>;
91 lcd_display_in: endpoint {
92 remote-endpoint = <&ipu1_di1_disp1>;
99 lcd_display_out: endpoint {
100 remote-endpoint = <&lcd_panel_in>;
107 * edt,et057090dhu: EDT 5.7" LCD TFT
108 * edt,et070080dh6: EDT 7.0" LCD TFT
110 compatible = "edt,et057090dhu";
111 backlight = <&backlight>;
114 lcd_panel_in: endpoint {
115 remote-endpoint = <&lcd_display_out>;
120 reg_pcie_switch: regulator-pcie-switch {
121 compatible = "regulator-fixed";
122 regulator-name = "pcie_switch";
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <1800000>;
125 gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
126 startup-delay-us = <100000>;
133 brightness-levels = <0 127 191 223 239 247 251 255>;
134 default-brightness-level = <1>;
150 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
155 compatible = "plx,pex8605";
159 /* M41T0M6 real time clock on carrier board */
161 compatible = "st,m41t00";
167 * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
175 remote-endpoint = <&lcd_display_in>;
183 /* active-high meaning opposite of regular PERST# active-low polarity */
184 reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
185 reset-gpio-active-high;
186 vpcie-supply = <®_pcie_switch>;
243 vbus-supply = <®_usb_host_vbus>;
248 vbus-supply = <®_usb_otg_vbus>;
254 pinctrl-names = "default";
255 pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
256 cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
262 pinctrl-names = "default";
263 pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
264 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
270 * Mux the Apalis GPIOs
272 pinctrl-names = "default";
273 pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
274 &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
275 &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
276 &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8