arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 i2c0 = &i2c1;
  23                 i2c1 = &i2c2;
  24                 i2c2 = &i2c3;
  25                 serial0 = &uart1;
  26                 serial1 = &uart2;
  27                 serial2 = &uart3;
  28                 serial3 = &uart4;
  29                 serial4 = &uart5;
  30                 spi0 = &spi1;
  31                 spi1 = &spi2;
  32                 spi2 = &spi3;
  33                 usb0 = &usbotg;
  34                 usb1 = &usbhost1;
  35         };
  36
  37         cpus {
  38                 #address-cells = <0>;
  39                 #size-cells = <0>;
  40
  41                 cpu {
  42                         compatible = "arm,arm926ej-s";
  43                         device_type = "cpu";
  44                 };
  45         };
  46
  47         asic: asic-interrupt-controller@68000000 {
  48                 compatible = "fsl,imx25-asic", "fsl,avic";
  49                 interrupt-controller;
  50                 #interrupt-cells = <1>;
  51                 reg = <0x68000000 0x8000000>;
  52         };
  53
  54         clocks {
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57
  58                 osc {
  59                         compatible = "fsl,imx-osc", "fixed-clock";
  60                         #clock-cells = <0>;
  61                         clock-frequency = <24000000>;
  62                 };
  63         };
  64
  65         soc {
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68                 compatible = "simple-bus";
  69                 interrupt-parent = <&asic>;
  70                 ranges;
  71
  72                 aips@43f00000 { /* AIPS1 */
  73                         compatible = "fsl,aips-bus", "simple-bus";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76                         reg = <0x43f00000 0x100000>;
  77                         ranges;
  78
  79                         i2c1: i2c@43f80000 {
  80                                 #address-cells = <1>;
  81                                 #size-cells = <0>;
  82                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  83                                 reg = <0x43f80000 0x4000>;
  84                                 clocks = <&clks 48>;
  85                                 clock-names = "";
  86                                 interrupts = <3>;
  87                                 status = "disabled";
  88                         };
  89
  90                         i2c3: i2c@43f84000 {
  91                                 #address-cells = <1>;
  92                                 #size-cells = <0>;
  93                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  94                                 reg = <0x43f84000 0x4000>;
  95                                 clocks = <&clks 48>;
  96                                 clock-names = "";
  97                                 interrupts = <10>;
  98                                 status = "disabled";
  99                         };
 100
 101                         can1: can@43f88000 {
 102                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 103                                 reg = <0x43f88000 0x4000>;
 104                                 interrupts = <43>;
 105                                 clocks = <&clks 75>, <&clks 75>;
 106                                 clock-names = "ipg", "per";
 107                                 status = "disabled";
 108                         };
 109
 110                         can2: can@43f8c000 {
 111                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 112                                 reg = <0x43f8c000 0x4000>;
 113                                 interrupts = <44>;
 114                                 clocks = <&clks 76>, <&clks 76>;
 115                                 clock-names = "ipg", "per";
 116                                 status = "disabled";
 117                         };
 118
 119                         uart1: serial@43f90000 {
 120                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 121                                 reg = <0x43f90000 0x4000>;
 122                                 interrupts = <45>;
 123                                 clocks = <&clks 120>, <&clks 57>;
 124                                 clock-names = "ipg", "per";
 125                                 status = "disabled";
 126                         };
 127
 128                         uart2: serial@43f94000 {
 129                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 130                                 reg = <0x43f94000 0x4000>;
 131                                 interrupts = <32>;
 132                                 clocks = <&clks 121>, <&clks 57>;
 133                                 clock-names = "ipg", "per";
 134                                 status = "disabled";
 135                         };
 136
 137                         i2c2: i2c@43f98000 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 141                                 reg = <0x43f98000 0x4000>;
 142                                 clocks = <&clks 48>;
 143                                 clock-names = "";
 144                                 interrupts = <4>;
 145                                 status = "disabled";
 146                         };
 147
 148                         owire@43f9c000 {
 149                                 #address-cells = <1>;
 150                                 #size-cells = <0>;
 151                                 reg = <0x43f9c000 0x4000>;
 152                                 clocks = <&clks 51>;
 153                                 clock-names = "";
 154                                 interrupts = <2>;
 155                                 status = "disabled";
 156                         };
 157
 158                         spi1: cspi@43fa4000 {
 159                                 #address-cells = <1>;
 160                                 #size-cells = <0>;
 161                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 162                                 reg = <0x43fa4000 0x4000>;
 163                                 clocks = <&clks 62>, <&clks 62>;
 164                                 clock-names = "ipg", "per";
 165                                 interrupts = <14>;
 166                                 status = "disabled";
 167                         };
 168
 169                         kpp@43fa8000 {
 170                                 #address-cells = <1>;
 171                                 #size-cells = <0>;
 172                                 reg = <0x43fa8000 0x4000>;
 173                                 clocks = <&clks 102>;
 174                                 clock-names = "";
 175                                 interrupts = <24>;
 176                                 status = "disabled";
 177                         };
 178
 179                         iomuxc: iomuxc@43fac000 {
 180                                 compatible = "fsl,imx25-iomuxc";
 181                                 reg = <0x43fac000 0x4000>;
 182                         };
 183
 184                         audmux: audmux@43fb0000 {
 185                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 186                                 reg = <0x43fb0000 0x4000>;
 187                                 status = "disabled";
 188                         };
 189                 };
 190
 191                 spba@50000000 {
 192                         compatible = "fsl,spba-bus", "simple-bus";
 193                         #address-cells = <1>;
 194                         #size-cells = <1>;
 195                         reg = <0x50000000 0x40000>;
 196                         ranges;
 197
 198                         spi3: cspi@50004000 {
 199                                 #address-cells = <1>;
 200                                 #size-cells = <0>;
 201                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 202                                 reg = <0x50004000 0x4000>;
 203                                 interrupts = <0>;
 204                                 clocks = <&clks 80>, <&clks 80>;
 205                                 clock-names = "ipg", "per";
 206                                 status = "disabled";
 207                         };
 208
 209                         uart4: serial@50008000 {
 210                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 211                                 reg = <0x50008000 0x4000>;
 212                                 interrupts = <5>;
 213                                 clocks = <&clks 123>, <&clks 57>;
 214                                 clock-names = "ipg", "per";
 215                                 status = "disabled";
 216                         };
 217
 218                         uart3: serial@5000c000 {
 219                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 220                                 reg = <0x5000c000 0x4000>;
 221                                 interrupts = <18>;
 222                                 clocks = <&clks 122>, <&clks 57>;
 223                                 clock-names = "ipg", "per";
 224                                 status = "disabled";
 225                         };
 226
 227                         spi2: cspi@50010000 {
 228                                 #address-cells = <1>;
 229                                 #size-cells = <0>;
 230                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 231                                 reg = <0x50010000 0x4000>;
 232                                 clocks = <&clks 79>, <&clks 79>;
 233                                 clock-names = "ipg", "per";
 234                                 interrupts = <13>;
 235                                 status = "disabled";
 236                         };
 237
 238                         ssi2: ssi@50014000 {
 239                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 240                                 reg = <0x50014000 0x4000>;
 241                                 interrupts = <11>;
 242                                 clocks = <&clks 118>;
 243                                 clock-names = "ipg";
 244                                 dmas = <&sdma 24 1 0>,
 245                                        <&sdma 25 1 0>;
 246                                 dma-names = "rx", "tx";
 247                                 status = "disabled";
 248                         };
 249
 250                         esai@50018000 {
 251                                 reg = <0x50018000 0x4000>;
 252                                 interrupts = <7>;
 253                         };
 254
 255                         uart5: serial@5002c000 {
 256                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 257                                 reg = <0x5002c000 0x4000>;
 258                                 interrupts = <40>;
 259                                 clocks = <&clks 124>, <&clks 57>;
 260                                 clock-names = "ipg", "per";
 261                                 status = "disabled";
 262                         };
 263
 264                         tsc: tsc@50030000 {
 265                                 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
 266                                 reg = <0x50030000 0x4000>;
 267                                 interrupts = <46>;
 268                                 clocks = <&clks 119>;
 269                                 clock-names = "ipg";
 270                                 status = "disabled";
 271                         };
 272
 273                         ssi1: ssi@50034000 {
 274                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 275                                 reg = <0x50034000 0x4000>;
 276                                 interrupts = <12>;
 277                                 clocks = <&clks 117>;
 278                                 clock-names = "ipg";
 279                                 dmas = <&sdma 28 1 0>,
 280                                        <&sdma 29 1 0>;
 281                                 dma-names = "rx", "tx";
 282                                 status = "disabled";
 283                         };
 284
 285                         fec: ethernet@50038000 {
 286                                 compatible = "fsl,imx25-fec";
 287                                 reg = <0x50038000 0x4000>;
 288                                 interrupts = <57>;
 289                                 clocks = <&clks 88>, <&clks 65>;
 290                                 clock-names = "ipg", "ahb";
 291                                 status = "disabled";
 292                         };
 293                 };
 294
 295                 aips@53f00000 { /* AIPS2 */
 296                         compatible = "fsl,aips-bus", "simple-bus";
 297                         #address-cells = <1>;
 298                         #size-cells = <1>;
 299                         reg = <0x53f00000 0x100000>;
 300                         ranges;
 301
 302                         clks: ccm@53f80000 {
 303                                 compatible = "fsl,imx25-ccm";
 304                                 reg = <0x53f80000 0x4000>;
 305                                 interrupts = <31>;
 306                                 #clock-cells = <1>;
 307                         };
 308
 309                         gpt4: timer@53f84000 {
 310                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 311                                 reg = <0x53f84000 0x4000>;
 312                                 clocks = <&clks 9>, <&clks 45>;
 313                                 clock-names = "ipg", "per";
 314                                 interrupts = <1>;
 315                         };
 316
 317                         gpt3: timer@53f88000 {
 318                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 319                                 reg = <0x53f88000 0x4000>;
 320                                 clocks = <&clks 9>, <&clks 47>;
 321                                 clock-names = "ipg", "per";
 322                                 interrupts = <29>;
 323                         };
 324
 325                         gpt2: timer@53f8c000 {
 326                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 327                                 reg = <0x53f8c000 0x4000>;
 328                                 clocks = <&clks 9>, <&clks 47>;
 329                                 clock-names = "ipg", "per";
 330                                 interrupts = <53>;
 331                         };
 332
 333                         gpt1: timer@53f90000 {
 334                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 335                                 reg = <0x53f90000 0x4000>;
 336                                 clocks = <&clks 9>, <&clks 47>;
 337                                 clock-names = "ipg", "per";
 338                                 interrupts = <54>;
 339                         };
 340
 341                         epit1: timer@53f94000 {
 342                                 compatible = "fsl,imx25-epit";
 343                                 reg = <0x53f94000 0x4000>;
 344                                 interrupts = <28>;
 345                         };
 346
 347                         epit2: timer@53f98000 {
 348                                 compatible = "fsl,imx25-epit";
 349                                 reg = <0x53f98000 0x4000>;
 350                                 interrupts = <27>;
 351                         };
 352
 353                         gpio4: gpio@53f9c000 {
 354                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 355                                 reg = <0x53f9c000 0x4000>;
 356                                 interrupts = <23>;
 357                                 gpio-controller;
 358                                 #gpio-cells = <2>;
 359                                 interrupt-controller;
 360                                 #interrupt-cells = <2>;
 361                         };
 362
 363                         pwm2: pwm@53fa0000 {
 364                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 365                                 #pwm-cells = <2>;
 366                                 reg = <0x53fa0000 0x4000>;
 367                                 clocks = <&clks 106>, <&clks 36>;
 368                                 clock-names = "ipg", "per";
 369                                 interrupts = <36>;
 370                         };
 371
 372                         gpio3: gpio@53fa4000 {
 373                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 374                                 reg = <0x53fa4000 0x4000>;
 375                                 interrupts = <16>;
 376                                 gpio-controller;
 377                                 #gpio-cells = <2>;
 378                                 interrupt-controller;
 379                                 #interrupt-cells = <2>;
 380                         };
 381
 382                         pwm3: pwm@53fa8000 {
 383                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 384                                 #pwm-cells = <2>;
 385                                 reg = <0x53fa8000 0x4000>;
 386                                 clocks = <&clks 107>, <&clks 36>;
 387                                 clock-names = "ipg", "per";
 388                                 interrupts = <41>;
 389                         };
 390
 391                         esdhc1: esdhc@53fb4000 {
 392                                 compatible = "fsl,imx25-esdhc";
 393                                 reg = <0x53fb4000 0x4000>;
 394                                 interrupts = <9>;
 395                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 396                                 clock-names = "ipg", "ahb", "per";
 397                                 status = "disabled";
 398                         };
 399
 400                         esdhc2: esdhc@53fb8000 {
 401                                 compatible = "fsl,imx25-esdhc";
 402                                 reg = <0x53fb8000 0x4000>;
 403                                 interrupts = <8>;
 404                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 405                                 clock-names = "ipg", "ahb", "per";
 406                                 status = "disabled";
 407                         };
 408
 409                         lcdc: lcdc@53fbc000 {
 410                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 411                                 reg = <0x53fbc000 0x4000>;
 412                                 interrupts = <39>;
 413                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 414                                 clock-names = "ipg", "ahb", "per";
 415                                 status = "disabled";
 416                         };
 417
 418                         slcdc@53fc0000 {
 419                                 reg = <0x53fc0000 0x4000>;
 420                                 interrupts = <38>;
 421                                 status = "disabled";
 422                         };
 423
 424                         pwm4: pwm@53fc8000 {
 425                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 426                                 reg = <0x53fc8000 0x4000>;
 427                                 clocks = <&clks 108>, <&clks 36>;
 428                                 clock-names = "ipg", "per";
 429                                 interrupts = <42>;
 430                         };
 431
 432                         gpio1: gpio@53fcc000 {
 433                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 434                                 reg = <0x53fcc000 0x4000>;
 435                                 interrupts = <52>;
 436                                 gpio-controller;
 437                                 #gpio-cells = <2>;
 438                                 interrupt-controller;
 439                                 #interrupt-cells = <2>;
 440                         };
 441
 442                         gpio2: gpio@53fd0000 {
 443                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 444                                 reg = <0x53fd0000 0x4000>;
 445                                 interrupts = <51>;
 446                                 gpio-controller;
 447                                 #gpio-cells = <2>;
 448                                 interrupt-controller;
 449                                 #interrupt-cells = <2>;
 450                         };
 451
 452                         sdma: sdma@53fd4000 {
 453                                 compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
 454                                 reg = <0x53fd4000 0x4000>;
 455                                 clocks = <&clks 112>, <&clks 68>;
 456                                 clock-names = "ipg", "ahb";
 457                                 #dma-cells = <3>;
 458                                 interrupts = <34>;
 459                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 460                         };
 461
 462                         wdog@53fdc000 {
 463                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 464                                 reg = <0x53fdc000 0x4000>;
 465                                 clocks = <&clks 126>;
 466                                 clock-names = "";
 467                                 interrupts = <55>;
 468                         };
 469
 470                         pwm1: pwm@53fe0000 {
 471                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 472                                 #pwm-cells = <2>;
 473                                 reg = <0x53fe0000 0x4000>;
 474                                 clocks = <&clks 105>, <&clks 36>;
 475                                 clock-names = "ipg", "per";
 476                                 interrupts = <26>;
 477                         };
 478
 479                         iim: iim@53ff0000 {
 480                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 481                                 reg = <0x53ff0000 0x4000>;
 482                                 interrupts = <19>;
 483                                 clocks = <&clks 99>;
 484                         };
 485
 486                         usbphy1: usbphy@1 {
 487                                 compatible = "nop-usbphy";
 488                                 status = "disabled";
 489                         };
 490
 491                         usbphy2: usbphy@2 {
 492                                 compatible = "nop-usbphy";
 493                                 status = "disabled";
 494                         };
 495
 496                         usbotg: usb@53ff4000 {
 497                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 498                                 reg = <0x53ff4000 0x0200>;
 499                                 interrupts = <37>;
 500                                 clocks = <&clks 70>;
 501                                 fsl,usbmisc = <&usbmisc 0>;
 502                                 status = "disabled";
 503                         };
 504
 505                         usbhost1: usb@53ff4400 {
 506                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 507                                 reg = <0x53ff4400 0x0200>;
 508                                 interrupts = <35>;
 509                                 clocks = <&clks 70>;
 510                                 fsl,usbmisc = <&usbmisc 1>;
 511                                 status = "disabled";
 512                         };
 513
 514                         usbmisc: usbmisc@53ff4600 {
 515                                 #index-cells = <1>;
 516                                 compatible = "fsl,imx25-usbmisc";
 517                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 518                                 clock-names = "ipg", "ahb", "per";
 519                                 reg = <0x53ff4600 0x00f>;
 520                                 status = "disabled";
 521                         };
 522
 523                         dryice@53ffc000 {
 524                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 525                                 reg = <0x53ffc000 0x4000>;
 526                                 clocks = <&clks 81>;
 527                                 clock-names = "ipg";
 528                                 interrupts = <25>;
 529                         };
 530                 };
 531
 532                 emi@80000000 {
 533                         compatible = "fsl,emi-bus", "simple-bus";
 534                         #address-cells = <1>;
 535                         #size-cells = <1>;
 536                         reg = <0x80000000 0x3b002000>;
 537                         ranges;
 538
 539                         nfc: nand@bb000000 {
 540                                 #address-cells = <1>;
 541                                 #size-cells = <1>;
 542
 543                                 compatible = "fsl,imx25-nand";
 544                                 reg = <0xbb000000 0x2000>;
 545                                 clocks = <&clks 50>;
 546                                 clock-names = "";
 547                                 interrupts = <33>;
 548                                 status = "disabled";
 549                         };
 550                 };
 551         };
 552 };