4 select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
5 select ARCH_HAS_ELF_RANDOMIZE
6 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
7 select ARCH_HAVE_CUSTOM_GPIO_H
8 select ARCH_HAS_GCOV_PROFILE_ALL
9 select ARCH_MIGHT_HAVE_PC_PARPORT
10 select ARCH_SUPPORTS_ATOMIC_RMW
11 select ARCH_USE_BUILTIN_BSWAP
12 select ARCH_USE_CMPXCHG_LOCKREF
13 select ARCH_WANT_IPC_PARSE_VERSION
14 select BUILDTIME_EXTABLE_SORT if MMU
15 select CLONE_BACKWARDS
16 select CPU_PM if (SUSPEND || CPU_IDLE)
17 select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
18 select GENERIC_ALLOCATOR
19 select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
20 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
21 select GENERIC_IDLE_POLL_SETUP
22 select GENERIC_IRQ_PROBE
23 select GENERIC_IRQ_SHOW
24 select GENERIC_IRQ_SHOW_LEVEL
25 select GENERIC_PCI_IOMAP
26 select GENERIC_SCHED_CLOCK
27 select GENERIC_SMP_IDLE_THREAD
28 select GENERIC_STRNCPY_FROM_USER
29 select GENERIC_STRNLEN_USER
30 select HANDLE_DOMAIN_IRQ
31 select HARDIRQS_SW_RESEND
32 select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
33 select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
34 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
36 select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
37 select HAVE_ARCH_TRACEHOOK
39 select HAVE_CC_STACKPROTECTOR
40 select HAVE_CONTEXT_TRACKING
41 select HAVE_C_RECORDMCOUNT
42 select HAVE_DEBUG_KMEMLEAK
43 select HAVE_DMA_API_DEBUG
45 select HAVE_DMA_CONTIGUOUS if MMU
46 select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
47 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
48 select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
49 select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
50 select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
51 select HAVE_GENERIC_DMA_COHERENT
52 select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
53 select HAVE_IDE if PCI || ISA || PCMCIA
54 select HAVE_IRQ_TIME_ACCOUNTING
55 select HAVE_KERNEL_GZIP
56 select HAVE_KERNEL_LZ4
57 select HAVE_KERNEL_LZMA
58 select HAVE_KERNEL_LZO
60 select HAVE_KPROBES if !XIP_KERNEL
61 select HAVE_KRETPROBES if (HAVE_KPROBES)
63 select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
64 select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
65 select HAVE_OPTPROBES if !THUMB2_KERNEL
66 select HAVE_PERF_EVENTS
68 select HAVE_PERF_USER_STACK_DUMP
69 select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
70 select HAVE_REGS_AND_STACK_ACCESS_API
71 select HAVE_SYSCALL_TRACEPOINTS
73 select HAVE_VIRT_CPU_ACCOUNTING_GEN
74 select IRQ_FORCED_THREADING
75 select MODULES_USE_ELF_REL
78 select OLD_SIGSUSPEND3
79 select PERF_USE_VMALLOC
81 select SYS_SUPPORTS_APM_EMULATION
82 # Above selects are sorted alphabetically; please add new ones
83 # according to that. Thanks.
85 The ARM series is a line of low-power-consumption RISC chip designs
86 licensed by ARM Ltd and targeted at embedded applications and
87 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
88 manufactured, but legacy ARM-based PC hardware remains popular in
89 Europe. There is an ARM Linux project with a web page at
90 <http://www.arm.linux.org.uk/>.
92 config ARM_HAS_SG_CHAIN
93 select ARCH_HAS_SG_CHAIN
96 config NEED_SG_DMA_LENGTH
99 config ARM_DMA_USE_IOMMU
101 select ARM_HAS_SG_CHAIN
102 select NEED_SG_DMA_LENGTH
106 config ARM_DMA_IOMMU_ALIGNMENT
107 int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
111 DMA mapping framework by default aligns all buffers to the smallest
112 PAGE_SIZE order which is greater than or equal to the requested buffer
113 size. This works well for buffers up to a few hundreds kilobytes, but
114 for larger buffers it just a waste of address space. Drivers which has
115 relatively small addressing window (like 64Mib) might run out of
116 virtual space with just a few allocations.
118 With this parameter you can specify the maximum PAGE_SIZE order for
119 DMA IOMMU buffers. Larger buffers will be aligned only to this
120 specified order. The order is expressed as a power of two multiplied
125 config MIGHT_HAVE_PCI
128 config SYS_SUPPORTS_APM_EMULATION
133 select GENERIC_ALLOCATOR
144 The Extended Industry Standard Architecture (EISA) bus was
145 developed as an open alternative to the IBM MicroChannel bus.
147 The EISA bus provided some of the features of the IBM MicroChannel
148 bus while maintaining backward compatibility with cards made for
149 the older ISA bus. The EISA bus saw limited use between 1988 and
150 1995 when it was made obsolete by the PCI bus.
152 Say Y here if you are building a kernel for an EISA-based machine.
159 config STACKTRACE_SUPPORT
163 config HAVE_LATENCYTOP_SUPPORT
168 config LOCKDEP_SUPPORT
172 config TRACE_IRQFLAGS_SUPPORT
176 config RWSEM_XCHGADD_ALGORITHM
180 config ARCH_HAS_ILOG2_U32
183 config ARCH_HAS_ILOG2_U64
186 config ARCH_HAS_BANDGAP
189 config GENERIC_HWEIGHT
193 config GENERIC_CALIBRATE_DELAY
197 config ARCH_MAY_HAVE_PC_FDC
203 config NEED_DMA_MAP_STATE
206 config ARCH_SUPPORTS_UPROBES
209 config ARCH_HAS_DMA_SET_COHERENT_MASK
212 config GENERIC_ISA_DMA
218 config NEED_RET_TO_USER
226 default 0xffff0000 if MMU || CPU_HIGH_VECTOR
227 default DRAM_BASE if REMAP_VECTORS_TO_RAM
230 The base address of exception vectors. This must be two pages
233 config ARM_PATCH_PHYS_VIRT
234 bool "Patch physical to virtual translations at runtime" if EMBEDDED
236 depends on !XIP_KERNEL && MMU
237 depends on !ARCH_REALVIEW || !SPARSEMEM
239 Patch phys-to-virt and virt-to-phys translation functions at
240 boot and module load time according to the position of the
241 kernel in system memory.
243 This can only be used with non-XIP MMU kernels where the base
244 of physical memory is at a 16MB boundary.
246 Only disable this option if you know that you do not require
247 this feature (eg, building a kernel for a single machine) and
248 you need to shrink the kernel to the minimal size.
250 config NEED_MACH_IO_H
253 Select this when mach/io.h is required to provide special
254 definitions for this platform. The need for mach/io.h should
255 be avoided when possible.
257 config NEED_MACH_MEMORY_H
260 Select this when mach/memory.h is required to provide special
261 definitions for this platform. The need for mach/memory.h should
262 be avoided when possible.
265 hex "Physical address of main memory" if MMU
266 depends on !ARM_PATCH_PHYS_VIRT
267 default DRAM_BASE if !MMU
268 default 0x00000000 if ARCH_EBSA110 || \
269 EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
274 (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
275 default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
276 default 0x20000000 if ARCH_S5PV210
277 default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
278 default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
279 default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
280 default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
281 default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
283 Please provide the physical address corresponding to the
284 location of main memory in your system.
290 config PGTABLE_LEVELS
292 default 3 if ARM_LPAE
295 source "init/Kconfig"
297 source "kernel/Kconfig.freezer"
302 bool "MMU-based Paged Memory Management Support"
305 Select if you want MMU-based virtualised addressing space
306 support by paged memory management. If unsure, say 'Y'.
309 # The "ARM system type" choice list is ordered alphabetically by option
310 # text. Please add new entries in the option alphabetic order.
313 prompt "ARM system type"
314 default ARCH_VERSATILE if !MMU
315 default ARCH_MULTIPLATFORM if MMU
317 config ARCH_MULTIPLATFORM
318 bool "Allow multiple platforms to be selected"
320 select ARCH_WANT_OPTIONAL_GPIOLIB
321 select ARM_HAS_SG_CHAIN
322 select ARM_PATCH_PHYS_VIRT
326 select GENERIC_CLOCKEVENTS
327 select MIGHT_HAVE_PCI
328 select MULTI_IRQ_HANDLER
332 config ARM_SINGLE_ARMV7M
333 bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
335 select ARCH_WANT_OPTIONAL_GPIOLIB
341 select GENERIC_CLOCKEVENTS
347 bool "ARM Ltd. RealView family"
348 select ARCH_WANT_OPTIONAL_GPIOLIB
350 select ARM_TIMER_SP804
352 select COMMON_CLK_VERSATILE
353 select GENERIC_CLOCKEVENTS
354 select GPIO_PL061 if GPIOLIB
356 select NEED_MACH_MEMORY_H
357 select PLAT_VERSATILE
358 select PLAT_VERSATILE_SCHED_CLOCK
360 This enables support for ARM Ltd RealView boards.
362 config ARCH_VERSATILE
363 bool "ARM Ltd. Versatile family"
364 select ARCH_WANT_OPTIONAL_GPIOLIB
366 select ARM_TIMER_SP804
369 select GENERIC_CLOCKEVENTS
370 select HAVE_MACH_CLKDEV
372 select PLAT_VERSATILE
373 select PLAT_VERSATILE_CLOCK
374 select PLAT_VERSATILE_SCHED_CLOCK
375 select VERSATILE_FPGA_IRQ
377 This enables support for ARM Ltd Versatile board.
380 bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
381 select ARCH_REQUIRE_GPIOLIB
386 select GENERIC_CLOCKEVENTS
390 Support for Cirrus Logic 711x/721x/731x based boards.
393 bool "Cortina Systems Gemini"
394 select ARCH_REQUIRE_GPIOLIB
397 select GENERIC_CLOCKEVENTS
399 Support for the Cortina Systems Gemini family SoCs
403 select ARCH_USES_GETTIMEOFFSET
406 select NEED_MACH_IO_H
407 select NEED_MACH_MEMORY_H
410 This is an evaluation board for the StrongARM processor available
411 from Digital. It has limited hardware on-board, including an
412 Ethernet interface, two PCMCIA sockets, two serial ports and a
417 select ARCH_HAS_HOLES_MEMORYMODEL
418 select ARCH_REQUIRE_GPIOLIB
419 select ARCH_USES_GETTIMEOFFSET
425 This enables support for the Cirrus EP93xx series of CPUs.
427 config ARCH_FOOTBRIDGE
431 select GENERIC_CLOCKEVENTS
433 select NEED_MACH_IO_H if !MMU
434 select NEED_MACH_MEMORY_H
436 Support for systems based on the DC21285 companion chip
437 ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
440 bool "Hilscher NetX based"
444 select GENERIC_CLOCKEVENTS
446 This enables support for systems based on the Hilscher NetX Soc
452 select NEED_MACH_MEMORY_H
453 select NEED_RET_TO_USER
459 Support for Intel's IOP13XX (XScale) family of processors.
464 select ARCH_REQUIRE_GPIOLIB
467 select NEED_RET_TO_USER
471 Support for Intel's 80219 and IOP32X (XScale) family of
477 select ARCH_REQUIRE_GPIOLIB
480 select NEED_RET_TO_USER
484 Support for Intel's IOP33X (XScale) family of processors.
489 select ARCH_HAS_DMA_SET_COHERENT_MASK
490 select ARCH_REQUIRE_GPIOLIB
491 select ARCH_SUPPORTS_BIG_ENDIAN
494 select DMABOUNCE if PCI
495 select GENERIC_CLOCKEVENTS
496 select MIGHT_HAVE_PCI
497 select NEED_MACH_IO_H
498 select USB_EHCI_BIG_ENDIAN_DESC
499 select USB_EHCI_BIG_ENDIAN_MMIO
501 Support for Intel's IXP4XX (XScale) family of processors.
505 select ARCH_REQUIRE_GPIOLIB
507 select GENERIC_CLOCKEVENTS
508 select MIGHT_HAVE_PCI
512 select PLAT_ORION_LEGACY
514 Support for the Marvell Dove SoC 88AP510
517 bool "Marvell MV78xx0"
518 select ARCH_REQUIRE_GPIOLIB
520 select GENERIC_CLOCKEVENTS
523 select PLAT_ORION_LEGACY
525 Support for the following Marvell MV78xx0 series SoCs:
531 select ARCH_REQUIRE_GPIOLIB
533 select GENERIC_CLOCKEVENTS
536 select PLAT_ORION_LEGACY
538 Support for the following Marvell Orion 5x series SoCs:
539 Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
540 Orion-2 (5281), Orion-1-90 (6183).
543 bool "Marvell PXA168/910/MMP2"
545 select ARCH_REQUIRE_GPIOLIB
547 select GENERIC_ALLOCATOR
548 select GENERIC_CLOCKEVENTS
551 select MULTI_IRQ_HANDLER
556 Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
559 bool "Micrel/Kendin KS8695"
560 select ARCH_REQUIRE_GPIOLIB
563 select GENERIC_CLOCKEVENTS
564 select NEED_MACH_MEMORY_H
566 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
567 System-on-Chip devices.
570 bool "Nuvoton W90X900 CPU"
571 select ARCH_REQUIRE_GPIOLIB
575 select GENERIC_CLOCKEVENTS
577 Support for Nuvoton (Winbond logic dept.) ARM9 processor,
578 At present, the w90x900 has been renamed nuc900, regarding
579 the ARM series product line, you can login the following
580 link address to know more.
582 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
583 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
587 select ARCH_REQUIRE_GPIOLIB
592 select GENERIC_CLOCKEVENTS
596 Support for the NXP LPC32XX family of processors
599 bool "PXA2xx/PXA3xx-based"
602 select ARCH_REQUIRE_GPIOLIB
603 select ARM_CPU_SUSPEND if PM
609 select GENERIC_CLOCKEVENTS
613 select MULTI_IRQ_HANDLER
617 Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
619 config ARCH_SHMOBILE_LEGACY
620 bool "Renesas ARM SoCs (non-multiplatform)"
622 select ARM_PATCH_PHYS_VIRT if MMU
625 select GENERIC_CLOCKEVENTS
626 select HAVE_ARM_SCU if SMP
627 select HAVE_ARM_TWD if SMP
629 select MIGHT_HAVE_CACHE_L2X0
630 select MULTI_IRQ_HANDLER
633 select PM_GENERIC_DOMAINS if PM
637 Support for Renesas ARM SoC platforms using a non-multiplatform
638 kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
644 select ARCH_MAY_HAVE_PC_FDC
645 select ARCH_SPARSEMEM_ENABLE
646 select ARCH_USES_GETTIMEOFFSET
650 select HAVE_PATA_PLATFORM
652 select NEED_MACH_IO_H
653 select NEED_MACH_MEMORY_H
657 On the Acorn Risc-PC, Linux can support the internal IDE disk and
658 CD-ROM interface, serial and parallel port, and the floppy drive.
663 select ARCH_REQUIRE_GPIOLIB
664 select ARCH_SPARSEMEM_ENABLE
669 select GENERIC_CLOCKEVENTS
673 select MULTI_IRQ_HANDLER
674 select NEED_MACH_MEMORY_H
677 Support for StrongARM 11x0 based boards.
680 bool "Samsung S3C24XX SoCs"
681 select ARCH_REQUIRE_GPIOLIB
684 select CLKSRC_SAMSUNG_PWM
685 select GENERIC_CLOCKEVENTS
687 select HAVE_S3C2410_I2C if I2C
688 select HAVE_S3C2410_WATCHDOG if WATCHDOG
689 select HAVE_S3C_RTC if RTC_CLASS
690 select MULTI_IRQ_HANDLER
691 select NEED_MACH_IO_H
694 Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
695 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
696 (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
697 Samsung SMDK2410 development board (and derivatives).
700 bool "Samsung S3C64XX"
701 select ARCH_REQUIRE_GPIOLIB
706 select CLKSRC_SAMSUNG_PWM
707 select COMMON_CLK_SAMSUNG
709 select GENERIC_CLOCKEVENTS
711 select HAVE_S3C2410_I2C if I2C
712 select HAVE_S3C2410_WATCHDOG if WATCHDOG
716 select PM_GENERIC_DOMAINS if PM
718 select S3C_GPIO_TRACK
720 select SAMSUNG_WAKEMASK
721 select SAMSUNG_WDT_RESET
723 Samsung S3C64XX series based systems
727 select ARCH_HAS_HOLES_MEMORYMODEL
728 select ARCH_REQUIRE_GPIOLIB
730 select GENERIC_ALLOCATOR
731 select GENERIC_CLOCKEVENTS
732 select GENERIC_IRQ_CHIP
738 Support for TI's DaVinci platform.
743 select ARCH_HAS_HOLES_MEMORYMODEL
745 select ARCH_REQUIRE_GPIOLIB
748 select GENERIC_CLOCKEVENTS
749 select GENERIC_IRQ_CHIP
752 select MULTI_IRQ_HANDLER
753 select NEED_MACH_IO_H if PCCARD
754 select NEED_MACH_MEMORY_H
757 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
761 menu "Multiple platform selection"
762 depends on ARCH_MULTIPLATFORM
764 comment "CPU Core family selection"
767 bool "ARMv4 based platforms (FA526)"
768 depends on !ARCH_MULTI_V6_V7
769 select ARCH_MULTI_V4_V5
772 config ARCH_MULTI_V4T
773 bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
774 depends on !ARCH_MULTI_V6_V7
775 select ARCH_MULTI_V4_V5
776 select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
777 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
778 CPU_ARM925T || CPU_ARM940T)
781 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
782 depends on !ARCH_MULTI_V6_V7
783 select ARCH_MULTI_V4_V5
784 select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
785 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
786 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
788 config ARCH_MULTI_V4_V5
792 bool "ARMv6 based platforms (ARM11)"
793 select ARCH_MULTI_V6_V7
797 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
799 select ARCH_MULTI_V6_V7
803 config ARCH_MULTI_V6_V7
805 select MIGHT_HAVE_CACHE_L2X0
807 config ARCH_MULTI_CPU_AUTO
808 def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
814 bool "Dummy Virtual Machine" if ARCH_MULTI_V7
818 select HAVE_ARM_ARCH_TIMER
821 # This is sorted alphabetically by mach-* pathname. However, plat-*
822 # Kconfigs may be included either alphabetically (according to the
823 # plat- suffix) or along side the corresponding mach-* source.
825 source "arch/arm/mach-mvebu/Kconfig"
827 source "arch/arm/mach-alpine/Kconfig"
829 source "arch/arm/mach-asm9260/Kconfig"
831 source "arch/arm/mach-at91/Kconfig"
833 source "arch/arm/mach-axxia/Kconfig"
835 source "arch/arm/mach-bcm/Kconfig"
837 source "arch/arm/mach-berlin/Kconfig"
839 source "arch/arm/mach-clps711x/Kconfig"
841 source "arch/arm/mach-cns3xxx/Kconfig"
843 source "arch/arm/mach-davinci/Kconfig"
845 source "arch/arm/mach-digicolor/Kconfig"
847 source "arch/arm/mach-dove/Kconfig"
849 source "arch/arm/mach-ep93xx/Kconfig"
851 source "arch/arm/mach-footbridge/Kconfig"
853 source "arch/arm/mach-gemini/Kconfig"
855 source "arch/arm/mach-highbank/Kconfig"
857 source "arch/arm/mach-hisi/Kconfig"
859 source "arch/arm/mach-integrator/Kconfig"
861 source "arch/arm/mach-iop32x/Kconfig"
863 source "arch/arm/mach-iop33x/Kconfig"
865 source "arch/arm/mach-iop13xx/Kconfig"
867 source "arch/arm/mach-ixp4xx/Kconfig"
869 source "arch/arm/mach-keystone/Kconfig"
871 source "arch/arm/mach-ks8695/Kconfig"
873 source "arch/arm/mach-meson/Kconfig"
875 source "arch/arm/mach-moxart/Kconfig"
877 source "arch/arm/mach-mv78xx0/Kconfig"
879 source "arch/arm/mach-imx/Kconfig"
881 source "arch/arm/mach-mediatek/Kconfig"
883 source "arch/arm/mach-mxs/Kconfig"
885 source "arch/arm/mach-netx/Kconfig"
887 source "arch/arm/mach-nomadik/Kconfig"
889 source "arch/arm/mach-nspire/Kconfig"
891 source "arch/arm/plat-omap/Kconfig"
893 source "arch/arm/mach-omap1/Kconfig"
895 source "arch/arm/mach-omap2/Kconfig"
897 source "arch/arm/mach-orion5x/Kconfig"
899 source "arch/arm/mach-picoxcell/Kconfig"
901 source "arch/arm/mach-pxa/Kconfig"
902 source "arch/arm/plat-pxa/Kconfig"
904 source "arch/arm/mach-mmp/Kconfig"
906 source "arch/arm/mach-qcom/Kconfig"
908 source "arch/arm/mach-realview/Kconfig"
910 source "arch/arm/mach-rockchip/Kconfig"
912 source "arch/arm/mach-sa1100/Kconfig"
914 source "arch/arm/mach-socfpga/Kconfig"
916 source "arch/arm/mach-spear/Kconfig"
918 source "arch/arm/mach-sti/Kconfig"
920 source "arch/arm/mach-s3c24xx/Kconfig"
922 source "arch/arm/mach-s3c64xx/Kconfig"
924 source "arch/arm/mach-s5pv210/Kconfig"
926 source "arch/arm/mach-exynos/Kconfig"
927 source "arch/arm/plat-samsung/Kconfig"
929 source "arch/arm/mach-shmobile/Kconfig"
931 source "arch/arm/mach-sunxi/Kconfig"
933 source "arch/arm/mach-prima2/Kconfig"
935 source "arch/arm/mach-tegra/Kconfig"
937 source "arch/arm/mach-u300/Kconfig"
939 source "arch/arm/mach-uniphier/Kconfig"
941 source "arch/arm/mach-ux500/Kconfig"
943 source "arch/arm/mach-versatile/Kconfig"
945 source "arch/arm/mach-vexpress/Kconfig"
946 source "arch/arm/plat-versatile/Kconfig"
948 source "arch/arm/mach-vt8500/Kconfig"
950 source "arch/arm/mach-w90x900/Kconfig"
952 source "arch/arm/mach-zx/Kconfig"
954 source "arch/arm/mach-zynq/Kconfig"
956 # ARMv7-M architecture
958 bool "Energy Micro efm32"
959 depends on ARM_SINGLE_ARMV7M
960 select ARCH_REQUIRE_GPIOLIB
962 Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
966 bool "NXP LPC18xx/LPC43xx"
967 depends on ARM_SINGLE_ARMV7M
968 select ARCH_HAS_RESET_CONTROLLER
970 select CLKSRC_LPC32XX
973 Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
974 high performance microcontrollers.
977 bool "STMicrolectronics STM32"
978 depends on ARM_SINGLE_ARMV7M
979 select ARCH_HAS_RESET_CONTROLLER
980 select ARMV7M_SYSTICK
982 select RESET_CONTROLLER
984 Support for STMicroelectronics STM32 processors.
986 # Definitions to make life easier
992 select GENERIC_CLOCKEVENTS
998 select GENERIC_IRQ_CHIP
1001 config PLAT_ORION_LEGACY
1008 config PLAT_VERSATILE
1011 config ARM_TIMER_SP804
1014 select CLKSRC_OF if OF
1016 source "arch/arm/firmware/Kconfig"
1018 source arch/arm/mm/Kconfig
1021 bool "Enable iWMMXt support"
1022 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
1023 default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
1025 Enable support for iWMMXt context switching at run time if
1026 running on a CPU that supports it.
1028 config MULTI_IRQ_HANDLER
1031 Allow each machine to specify it's own IRQ handler at run time.
1034 source "arch/arm/Kconfig-nommu"
1037 config PJ4B_ERRATA_4742
1038 bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
1039 depends on CPU_PJ4B && MACH_ARMADA_370
1042 When coming out of either a Wait for Interrupt (WFI) or a Wait for
1043 Event (WFE) IDLE states, a specific timing sensitivity exists between
1044 the retiring WFI/WFE instructions and the newly issued subsequent
1045 instructions. This sensitivity can result in a CPU hang scenario.
1047 The software must insert either a Data Synchronization Barrier (DSB)
1048 or Data Memory Barrier (DMB) command immediately after the WFI/WFE
1051 config ARM_ERRATA_326103
1052 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
1055 Executing a SWP instruction to read-only memory does not set bit 11
1056 of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
1057 treat the access as a read, preventing a COW from occurring and
1058 causing the faulting task to livelock.
1060 config ARM_ERRATA_411920
1061 bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
1062 depends on CPU_V6 || CPU_V6K
1064 Invalidation of the Instruction Cache operation can
1065 fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
1066 It does not affect the MPCore. This option enables the ARM Ltd.
1067 recommended workaround.
1069 config ARM_ERRATA_430973
1070 bool "ARM errata: Stale prediction on replaced interworking branch"
1073 This option enables the workaround for the 430973 Cortex-A8
1074 r1p* erratum. If a code sequence containing an ARM/Thumb
1075 interworking branch is replaced with another code sequence at the
1076 same virtual address, whether due to self-modifying code or virtual
1077 to physical address re-mapping, Cortex-A8 does not recover from the
1078 stale interworking branch prediction. This results in Cortex-A8
1079 executing the new code sequence in the incorrect ARM or Thumb state.
1080 The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
1081 and also flushes the branch target cache at every context switch.
1082 Note that setting specific bits in the ACTLR register may not be
1083 available in non-secure mode.
1085 config ARM_ERRATA_458693
1086 bool "ARM errata: Processor deadlock when a false hazard is created"
1088 depends on !ARCH_MULTIPLATFORM
1090 This option enables the workaround for the 458693 Cortex-A8 (r2p0)
1091 erratum. For very specific sequences of memory operations, it is
1092 possible for a hazard condition intended for a cache line to instead
1093 be incorrectly associated with a different cache line. This false
1094 hazard might then cause a processor deadlock. The workaround enables
1095 the L1 caching of the NEON accesses and disables the PLD instruction
1096 in the ACTLR register. Note that setting specific bits in the ACTLR
1097 register may not be available in non-secure mode.
1099 config ARM_ERRATA_460075
1100 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1102 depends on !ARCH_MULTIPLATFORM
1104 This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1105 erratum. Any asynchronous access to the L2 cache may encounter a
1106 situation in which recent store transactions to the L2 cache are lost
1107 and overwritten with stale memory contents from external memory. The
1108 workaround disables the write-allocate mode for the L2 cache via the
1109 ACTLR register. Note that setting specific bits in the ACTLR register
1110 may not be available in non-secure mode.
1112 config ARM_ERRATA_742230
1113 bool "ARM errata: DMB operation may be faulty"
1114 depends on CPU_V7 && SMP
1115 depends on !ARCH_MULTIPLATFORM
1117 This option enables the workaround for the 742230 Cortex-A9
1118 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1119 between two write operations may not ensure the correct visibility
1120 ordering of the two writes. This workaround sets a specific bit in
1121 the diagnostic register of the Cortex-A9 which causes the DMB
1122 instruction to behave as a DSB, ensuring the correct behaviour of
1125 config ARM_ERRATA_742231
1126 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1127 depends on CPU_V7 && SMP
1128 depends on !ARCH_MULTIPLATFORM
1130 This option enables the workaround for the 742231 Cortex-A9
1131 (r2p0..r2p2) erratum. Under certain conditions, specific to the
1132 Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1133 accessing some data located in the same cache line, may get corrupted
1134 data due to bad handling of the address hazard when the line gets
1135 replaced from one of the CPUs at the same time as another CPU is
1136 accessing it. This workaround sets specific bits in the diagnostic
1137 register of the Cortex-A9 which reduces the linefill issuing
1138 capabilities of the processor.
1140 config ARM_ERRATA_643719
1141 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1142 depends on CPU_V7 && SMP
1145 This option enables the workaround for the 643719 Cortex-A9 (prior to
1146 r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1147 register returns zero when it should return one. The workaround
1148 corrects this value, ensuring cache maintenance operations which use
1149 it behave as intended and avoiding data corruption.
1151 config ARM_ERRATA_720789
1152 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1155 This option enables the workaround for the 720789 Cortex-A9 (prior to
1156 r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1157 broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1158 As a consequence of this erratum, some TLB entries which should be
1159 invalidated are not, resulting in an incoherency in the system page
1160 tables. The workaround changes the TLB flushing routines to invalidate
1161 entries regardless of the ASID.
1163 config ARM_ERRATA_743622
1164 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1166 depends on !ARCH_MULTIPLATFORM
1168 This option enables the workaround for the 743622 Cortex-A9
1169 (r2p*) erratum. Under very rare conditions, a faulty
1170 optimisation in the Cortex-A9 Store Buffer may lead to data
1171 corruption. This workaround sets a specific bit in the diagnostic
1172 register of the Cortex-A9 which disables the Store Buffer
1173 optimisation, preventing the defect from occurring. This has no
1174 visible impact on the overall performance or power consumption of the
1177 config ARM_ERRATA_751472
1178 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1180 depends on !ARCH_MULTIPLATFORM
1182 This option enables the workaround for the 751472 Cortex-A9 (prior
1183 to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1184 completion of a following broadcasted operation if the second
1185 operation is received by a CPU before the ICIALLUIS has completed,
1186 potentially leading to corrupted entries in the cache or TLB.
1188 config ARM_ERRATA_754322
1189 bool "ARM errata: possible faulty MMU translations following an ASID switch"
1192 This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1193 r3p*) erratum. A speculative memory access may cause a page table walk
1194 which starts prior to an ASID switch but completes afterwards. This
1195 can populate the micro-TLB with a stale entry which may be hit with
1196 the new ASID. This workaround places two dsb instructions in the mm
1197 switching code so that no page table walks can cross the ASID switch.
1199 config ARM_ERRATA_754327
1200 bool "ARM errata: no automatic Store Buffer drain"
1201 depends on CPU_V7 && SMP
1203 This option enables the workaround for the 754327 Cortex-A9 (prior to
1204 r2p0) erratum. The Store Buffer does not have any automatic draining
1205 mechanism and therefore a livelock may occur if an external agent
1206 continuously polls a memory location waiting to observe an update.
1207 This workaround defines cpu_relax() as smp_mb(), preventing correctly
1208 written polling loops from denying visibility of updates to memory.
1210 config ARM_ERRATA_364296
1211 bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1214 This options enables the workaround for the 364296 ARM1136
1215 r0p2 erratum (possible cache data corruption with
1216 hit-under-miss enabled). It sets the undocumented bit 31 in
1217 the auxiliary control register and the FI bit in the control
1218 register, thus disabling hit-under-miss without putting the
1219 processor into full low interrupt latency mode. ARM11MPCore
1222 config ARM_ERRATA_764369
1223 bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1224 depends on CPU_V7 && SMP
1226 This option enables the workaround for erratum 764369
1227 affecting Cortex-A9 MPCore with two or more processors (all
1228 current revisions). Under certain timing circumstances, a data
1229 cache line maintenance operation by MVA targeting an Inner
1230 Shareable memory region may fail to proceed up to either the
1231 Point of Coherency or to the Point of Unification of the
1232 system. This workaround adds a DSB instruction before the
1233 relevant cache maintenance functions and sets a specific bit
1234 in the diagnostic control register of the SCU.
1236 config ARM_ERRATA_775420
1237 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1240 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1241 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1242 operation aborts with MMU exception, it might cause the processor
1243 to deadlock. This workaround puts DSB before executing ISB if
1244 an abort may occur on cache maintenance.
1246 config ARM_ERRATA_798181
1247 bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1248 depends on CPU_V7 && SMP
1250 On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1251 adequately shooting down all use of the old entries. This
1252 option enables the Linux kernel workaround for this erratum
1253 which sends an IPI to the CPUs that are running the same ASID
1254 as the one being invalidated.
1256 config ARM_ERRATA_773022
1257 bool "ARM errata: incorrect instructions may be executed from loop buffer"
1260 This option enables the workaround for the 773022 Cortex-A15
1261 (up to r0p4) erratum. In certain rare sequences of code, the
1262 loop buffer may deliver incorrect instructions. This
1263 workaround disables the loop buffer to avoid the erratum.
1267 source "arch/arm/common/Kconfig"
1274 Find out whether you have ISA slots on your motherboard. ISA is the
1275 name of a bus system, i.e. the way the CPU talks to the other stuff
1276 inside your box. Other bus systems are PCI, EISA, MicroChannel
1277 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1278 newer boards don't support it. If you have ISA, say Y, otherwise N.
1280 # Select ISA DMA controller support
1285 # Select ISA DMA interface
1290 bool "PCI support" if MIGHT_HAVE_PCI
1292 Find out whether you have a PCI motherboard. PCI is the name of a
1293 bus system, i.e. the way the CPU talks to the other stuff inside
1294 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1295 VESA. If you have PCI, say Y, otherwise N.
1301 config PCI_DOMAINS_GENERIC
1302 def_bool PCI_DOMAINS
1304 config PCI_NANOENGINE
1305 bool "BSE nanoEngine PCI support"
1306 depends on SA1100_NANOENGINE
1308 Enable PCI on the BSE nanoEngine board.
1313 config PCI_HOST_ITE8152
1315 depends on PCI && MACH_ARMCORE
1319 source "drivers/pci/Kconfig"
1320 source "drivers/pci/pcie/Kconfig"
1322 source "drivers/pcmcia/Kconfig"
1326 menu "Kernel Features"
1331 This option should be selected by machines which have an SMP-
1334 The only effect of this option is to make the SMP-related
1335 options available to the user for configuration.
1338 bool "Symmetric Multi-Processing"
1339 depends on CPU_V6K || CPU_V7
1340 depends on GENERIC_CLOCKEVENTS
1342 depends on MMU || ARM_MPU
1344 This enables support for systems with more than one CPU. If you have
1345 a system with only one CPU, say N. If you have a system with more
1346 than one CPU, say Y.
1348 If you say N here, the kernel will run on uni- and multiprocessor
1349 machines, but will use only one CPU of a multiprocessor machine. If
1350 you say Y here, the kernel will run on many, but not all,
1351 uniprocessor machines. On a uniprocessor machine, the kernel
1352 will run faster if you say N here.
1354 See also <file:Documentation/x86/i386/IO-APIC.txt>,
1355 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1356 <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1358 If you don't know what to do here, say N.
1361 bool "Allow booting SMP kernel on uniprocessor systems"
1362 depends on SMP && !XIP_KERNEL && MMU
1365 SMP kernels contain instructions which fail on non-SMP processors.
1366 Enabling this option allows the kernel to modify itself to make
1367 these instructions safe. Disabling it allows about 1K of space
1370 If you don't know what to do here, say Y.
1372 config ARM_CPU_TOPOLOGY
1373 bool "Support cpu topology definition"
1374 depends on SMP && CPU_V7
1377 Support ARM cpu topology definition. The MPIDR register defines
1378 affinity between processors which is then used to describe the cpu
1379 topology of an ARM System.
1382 bool "Multi-core scheduler support"
1383 depends on ARM_CPU_TOPOLOGY
1385 Multi-core scheduler support improves the CPU scheduler's decision
1386 making when dealing with multi-core CPU chips at a cost of slightly
1387 increased overhead in some places. If unsure say N here.
1390 bool "SMT scheduler support"
1391 depends on ARM_CPU_TOPOLOGY
1393 Improves the CPU scheduler's decision making when dealing with
1394 MultiThreading at a cost of slightly increased overhead in some
1395 places. If unsure say N here.
1400 This option enables support for the ARM system coherency unit
1402 config HAVE_ARM_ARCH_TIMER
1403 bool "Architected timer support"
1405 select ARM_ARCH_TIMER
1406 select GENERIC_CLOCKEVENTS
1408 This option enables support for the ARM architected timer
1413 select CLKSRC_OF if OF
1415 This options enables support for the ARM timer and watchdog unit
1418 bool "Multi-Cluster Power Management"
1419 depends on CPU_V7 && SMP
1421 This option provides the common power management infrastructure
1422 for (multi-)cluster based systems, such as big.LITTLE based
1425 config MCPM_QUAD_CLUSTER
1429 To avoid wasting resources unnecessarily, MCPM only supports up
1430 to 2 clusters by default.
1431 Platforms with 3 or 4 clusters that use MCPM must select this
1432 option to allow the additional clusters to be managed.
1435 bool "big.LITTLE support (Experimental)"
1436 depends on CPU_V7 && SMP
1439 This option enables support selections for the big.LITTLE
1440 system architecture.
1443 bool "big.LITTLE switcher support"
1444 depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
1445 select ARM_CPU_SUSPEND
1448 The big.LITTLE "switcher" provides the core functionality to
1449 transparently handle transition between a cluster of A15's
1450 and a cluster of A7's in a big.LITTLE system.
1452 config BL_SWITCHER_DUMMY_IF
1453 tristate "Simple big.LITTLE switcher user interface"
1454 depends on BL_SWITCHER && DEBUG_KERNEL
1456 This is a simple and dummy char dev interface to control
1457 the big.LITTLE switcher core code. It is meant for
1458 debugging purposes only.
1461 prompt "Memory split"
1465 Select the desired split between kernel and user memory.
1467 If you are not absolutely sure what you are doing, leave this
1471 bool "3G/1G user/kernel split"
1473 bool "2G/2G user/kernel split"
1475 bool "1G/3G user/kernel split"
1480 default PHYS_OFFSET if !MMU
1481 default 0x40000000 if VMSPLIT_1G
1482 default 0x80000000 if VMSPLIT_2G
1486 int "Maximum number of CPUs (2-32)"
1492 bool "Support for hot-pluggable CPUs"
1495 Say Y here to experiment with turning CPUs off and on. CPUs
1496 can be controlled through /sys/devices/system/cpu.
1499 bool "Support for the ARM Power State Coordination Interface (PSCI)"
1502 Say Y here if you want Linux to communicate with system firmware
1503 implementing the PSCI specification for CPU-centric power
1504 management operations described in ARM document number ARM DEN
1505 0022A ("Power State Coordination Interface System Software on
1508 # The GPIO number here must be sorted by descending number. In case of
1509 # a multiplatform kernel, we just want the highest value required by the
1510 # selected platforms.
1513 default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
1515 default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1516 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1517 default 416 if ARCH_SUNXI
1518 default 392 if ARCH_U8500
1519 default 352 if ARCH_VT8500
1520 default 288 if ARCH_ROCKCHIP
1521 default 264 if MACH_H4700
1524 Maximum number of GPIOs in the system.
1526 If unsure, leave the default value.
1528 source kernel/Kconfig.preempt
1532 default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
1533 ARCH_S5PV210 || ARCH_EXYNOS4
1534 default 128 if SOC_AT91RM9200
1535 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
1539 depends on HZ_FIXED = 0
1540 prompt "Timer frequency"
1564 default HZ_FIXED if HZ_FIXED != 0
1565 default 100 if HZ_100
1566 default 200 if HZ_200
1567 default 250 if HZ_250
1568 default 300 if HZ_300
1569 default 500 if HZ_500
1573 def_bool HIGH_RES_TIMERS
1575 config THUMB2_KERNEL
1576 bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1577 depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1578 default y if CPU_THUMBONLY
1580 select ARM_ASM_UNIFIED
1583 By enabling this option, the kernel will be compiled in
1584 Thumb-2 mode. A compiler/assembler that understand the unified
1585 ARM-Thumb syntax is needed.
1589 config THUMB2_AVOID_R_ARM_THM_JUMP11
1590 bool "Work around buggy Thumb-2 short branch relocations in gas"
1591 depends on THUMB2_KERNEL && MODULES
1594 Various binutils versions can resolve Thumb-2 branches to
1595 locally-defined, preemptible global symbols as short-range "b.n"
1596 branch instructions.
1598 This is a problem, because there's no guarantee the final
1599 destination of the symbol, or any candidate locations for a
1600 trampoline, are within range of the branch. For this reason, the
1601 kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1602 relocation in modules at all, and it makes little sense to add
1605 The symptom is that the kernel fails with an "unsupported
1606 relocation" error when loading some modules.
1608 Until fixed tools are available, passing
1609 -fno-optimize-sibling-calls to gcc should prevent gcc generating
1610 code which hits this problem, at the cost of a bit of extra runtime
1611 stack usage in some cases.
1613 The problem is described in more detail at:
1614 https://bugs.launchpad.net/binutils-linaro/+bug/725126
1616 Only Thumb-2 kernels are affected.
1618 Unless you are sure your tools don't have this problem, say Y.
1620 config ARM_ASM_UNIFIED
1624 bool "Use the ARM EABI to compile the kernel"
1626 This option allows for the kernel to be compiled using the latest
1627 ARM ABI (aka EABI). This is only useful if you are using a user
1628 space environment that is also compiled with EABI.
1630 Since there are major incompatibilities between the legacy ABI and
1631 EABI, especially with regard to structure member alignment, this
1632 option also changes the kernel syscall calling convention to
1633 disambiguate both ABIs and allow for backward compatibility support
1634 (selected with CONFIG_OABI_COMPAT).
1636 To use this you need GCC version 4.0.0 or later.
1639 bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1640 depends on AEABI && !THUMB2_KERNEL
1642 This option preserves the old syscall interface along with the
1643 new (ARM EABI) one. It also provides a compatibility layer to
1644 intercept syscalls that have structure arguments which layout
1645 in memory differs between the legacy ABI and the new ARM EABI
1646 (only for non "thumb" binaries). This option adds a tiny
1647 overhead to all syscalls and produces a slightly larger kernel.
1649 The seccomp filter system will not be available when this is
1650 selected, since there is no way yet to sensibly distinguish
1651 between calling conventions during filtering.
1653 If you know you'll be using only pure EABI user space then you
1654 can say N here. If this option is not selected and you attempt
1655 to execute a legacy ABI binary then the result will be
1656 UNPREDICTABLE (in fact it can be predicted that it won't work
1657 at all). If in doubt say N.
1659 config ARCH_HAS_HOLES_MEMORYMODEL
1662 config ARCH_SPARSEMEM_ENABLE
1665 config ARCH_SPARSEMEM_DEFAULT
1666 def_bool ARCH_SPARSEMEM_ENABLE
1668 config ARCH_SELECT_MEMORY_MODEL
1669 def_bool ARCH_SPARSEMEM_ENABLE
1671 config HAVE_ARCH_PFN_VALID
1672 def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1674 config HAVE_GENERIC_RCU_GUP
1679 bool "High Memory Support"
1682 The address space of ARM processors is only 4 Gigabytes large
1683 and it has to accommodate user address space, kernel address
1684 space as well as some memory mapped IO. That means that, if you
1685 have a large amount of physical memory and/or IO, not all of the
1686 memory can be "permanently mapped" by the kernel. The physical
1687 memory that is not permanently mapped is called "high memory".
1689 Depending on the selected kernel/user memory split, minimum
1690 vmalloc space and actual amount of RAM, you may not need this
1691 option which should result in a slightly faster kernel.
1696 bool "Allocate 2nd-level pagetables from highmem"
1699 config HW_PERF_EVENTS
1700 bool "Enable hardware performance counter support for perf events"
1701 depends on PERF_EVENTS
1704 Enable hardware performance counter support for perf events. If
1705 disabled, perf events will use software events only.
1707 config SYS_SUPPORTS_HUGETLBFS
1711 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1715 config ARCH_WANT_GENERAL_HUGETLB
1720 config FORCE_MAX_ZONEORDER
1721 int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
1722 range 11 64 if ARCH_SHMOBILE_LEGACY
1723 default "12" if SOC_AM33XX
1724 default "9" if SA1111 || ARCH_EFM32
1727 The kernel memory allocator divides physically contiguous memory
1728 blocks into "zones", where each zone is a power of two number of
1729 pages. This option selects the largest power of two that the kernel
1730 keeps in the memory allocator. If you need to allocate very large
1731 blocks of physically contiguous memory, then you may need to
1732 increase this value.
1734 This config option is actually maximum order plus one. For example,
1735 a value of 11 means that the largest free memory block is 2^10 pages.
1737 config ALIGNMENT_TRAP
1739 depends on CPU_CP15_MMU
1740 default y if !ARCH_EBSA110
1741 select HAVE_PROC_CPU if PROC_FS
1743 ARM processors cannot fetch/store information which is not
1744 naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1745 address divisible by 4. On 32-bit ARM processors, these non-aligned
1746 fetch/store instructions will be emulated in software if you say
1747 here, which has a severe performance impact. This is necessary for
1748 correct operation of some network protocols. With an IP-only
1749 configuration it is safe to say N, otherwise say Y.
1751 config UACCESS_WITH_MEMCPY
1752 bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1754 default y if CPU_FEROCEON
1756 Implement faster copy_to_user and clear_user methods for CPU
1757 cores where a 8-word STM instruction give significantly higher
1758 memory write throughput than a sequence of individual 32bit stores.
1760 A possible side effect is a slight increase in scheduling latency
1761 between threads sharing the same address space if they invoke
1762 such copy operations with large buffers.
1764 However, if the CPU data cache is using a write-allocate mode,
1765 this option is unlikely to provide any performance gain.
1769 prompt "Enable seccomp to safely compute untrusted bytecode"
1771 This kernel feature is useful for number crunching applications
1772 that may need to compute untrusted bytecode during their
1773 execution. By using pipes or other transports made available to
1774 the process as file descriptors supporting the read/write
1775 syscalls, it's possible to isolate those applications in
1776 their own address space using seccomp. Once seccomp is
1777 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1778 and the task is only allowed to execute a few safe syscalls
1779 defined by each seccomp mode.
1792 bool "Xen guest support on ARM"
1793 depends on ARM && AEABI && OF
1794 depends on CPU_V7 && !CPU_V6
1795 depends on !GENERIC_ATOMIC64
1797 select ARCH_DMA_ADDR_T_64BIT
1801 Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1808 bool "Flattened Device Tree support"
1811 select OF_EARLY_FLATTREE
1812 select OF_RESERVED_MEM
1814 Include support for flattened device tree machine descriptions.
1817 bool "Support for the traditional ATAGS boot data passing" if USE_OF
1820 This is the traditional way of passing data to the kernel at boot
1821 time. If you are solely relying on the flattened device tree (or
1822 the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1823 to remove ATAGS support from your kernel binary. If unsure,
1826 config DEPRECATED_PARAM_STRUCT
1827 bool "Provide old way to pass kernel parameters"
1830 This was deprecated in 2001 and announced to live on for 5 years.
1831 Some old boot loaders still use this way.
1833 # Compressed boot loader in ROM. Yes, we really want to ask about
1834 # TEXT and BSS so we preserve their values in the config files.
1835 config ZBOOT_ROM_TEXT
1836 hex "Compressed ROM boot loader base address"
1839 The physical address at which the ROM-able zImage is to be
1840 placed in the target. Platforms which normally make use of
1841 ROM-able zImage formats normally set this to a suitable
1842 value in their defconfig file.
1844 If ZBOOT_ROM is not enabled, this has no effect.
1846 config ZBOOT_ROM_BSS
1847 hex "Compressed ROM boot loader BSS address"
1850 The base address of an area of read/write memory in the target
1851 for the ROM-able zImage which must be available while the
1852 decompressor is running. It must be large enough to hold the
1853 entire decompressed kernel plus an additional 128 KiB.
1854 Platforms which normally make use of ROM-able zImage formats
1855 normally set this to a suitable value in their defconfig file.
1857 If ZBOOT_ROM is not enabled, this has no effect.
1860 bool "Compressed boot loader in ROM/flash"
1861 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1862 depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1864 Say Y here if you intend to execute your compressed kernel image
1865 (zImage) directly from ROM or flash. If unsure, say N.
1867 config ARM_APPENDED_DTB
1868 bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1871 With this option, the boot code will look for a device tree binary
1872 (DTB) appended to zImage
1873 (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1875 This is meant as a backward compatibility convenience for those
1876 systems with a bootloader that can't be upgraded to accommodate
1877 the documented boot protocol using a device tree.
1879 Beware that there is very little in terms of protection against
1880 this option being confused by leftover garbage in memory that might
1881 look like a DTB header after a reboot if no actual DTB is appended
1882 to zImage. Do not leave this option active in a production kernel
1883 if you don't intend to always append a DTB. Proper passing of the
1884 location into r2 of a bootloader provided DTB is always preferable
1887 config ARM_ATAG_DTB_COMPAT
1888 bool "Supplement the appended DTB with traditional ATAG information"
1889 depends on ARM_APPENDED_DTB
1891 Some old bootloaders can't be updated to a DTB capable one, yet
1892 they provide ATAGs with memory configuration, the ramdisk address,
1893 the kernel cmdline string, etc. Such information is dynamically
1894 provided by the bootloader and can't always be stored in a static
1895 DTB. To allow a device tree enabled kernel to be used with such
1896 bootloaders, this option allows zImage to extract the information
1897 from the ATAG list and store it at run time into the appended DTB.
1900 prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1901 default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1903 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1904 bool "Use bootloader kernel arguments if available"
1906 Uses the command-line options passed by the boot loader instead of
1907 the device tree bootargs property. If the boot loader doesn't provide
1908 any, the device tree bootargs property will be used.
1910 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1911 bool "Extend with bootloader kernel arguments"
1913 The command-line arguments provided by the boot loader will be
1914 appended to the the device tree bootargs property.
1919 string "Default kernel command string"
1922 On some architectures (EBSA110 and CATS), there is currently no way
1923 for the boot loader to pass arguments to the kernel. For these
1924 architectures, you should supply some command-line options at build
1925 time by entering them here. As a minimum, you should specify the
1926 memory size and the root device (e.g., mem=64M root=/dev/nfs).
1929 prompt "Kernel command line type" if CMDLINE != ""
1930 default CMDLINE_FROM_BOOTLOADER
1933 config CMDLINE_FROM_BOOTLOADER
1934 bool "Use bootloader kernel arguments if available"
1936 Uses the command-line options passed by the boot loader. If
1937 the boot loader doesn't provide any, the default kernel command
1938 string provided in CMDLINE will be used.
1940 config CMDLINE_EXTEND
1941 bool "Extend bootloader kernel arguments"
1943 The command-line arguments provided by the boot loader will be
1944 appended to the default kernel command string.
1946 config CMDLINE_FORCE
1947 bool "Always use the default kernel command string"
1949 Always use the default kernel command string, even if the boot
1950 loader passes other arguments to the kernel.
1951 This is useful if you cannot or don't want to change the
1952 command-line options your boot loader passes to the kernel.
1956 bool "Kernel Execute-In-Place from ROM"
1957 depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
1959 Execute-In-Place allows the kernel to run from non-volatile storage
1960 directly addressable by the CPU, such as NOR flash. This saves RAM
1961 space since the text section of the kernel is not loaded from flash
1962 to RAM. Read-write sections, such as the data section and stack,
1963 are still copied to RAM. The XIP kernel is not compressed since
1964 it has to run directly from flash, so it will take more space to
1965 store it. The flash address used to link the kernel object files,
1966 and for storing it, is configuration dependent. Therefore, if you
1967 say Y here, you must know the proper physical address where to
1968 store the kernel image depending on your own flash memory usage.
1970 Also note that the make target becomes "make xipImage" rather than
1971 "make zImage" or "make Image". The final kernel binary to put in
1972 ROM memory will be arch/arm/boot/xipImage.
1976 config XIP_PHYS_ADDR
1977 hex "XIP Kernel Physical Location"
1978 depends on XIP_KERNEL
1979 default "0x00080000"
1981 This is the physical address in your flash memory the kernel will
1982 be linked for and stored to. This address is dependent on your
1986 bool "Kexec system call (EXPERIMENTAL)"
1987 depends on (!SMP || PM_SLEEP_SMP)
1989 kexec is a system call that implements the ability to shutdown your
1990 current kernel, and to start another kernel. It is like a reboot
1991 but it is independent of the system firmware. And like a reboot
1992 you can start any kernel with it, not just Linux.
1994 It is an ongoing process to be certain the hardware in a machine
1995 is properly shutdown, so do not be surprised if this code does not
1996 initially work for you.
1999 bool "Export atags in procfs"
2000 depends on ATAGS && KEXEC
2003 Should the atags used to boot the kernel be exported in an "atags"
2004 file in procfs. Useful with kexec.
2007 bool "Build kdump crash kernel (EXPERIMENTAL)"
2009 Generate crash dump after being started by kexec. This should
2010 be normally only set in special crash dump kernels which are
2011 loaded in the main kernel with kexec-tools into a specially
2012 reserved region and then later executed after a crash by
2013 kdump/kexec. The crash dump kernel must be compiled to a
2014 memory address not used by the main kernel
2016 For more details see Documentation/kdump/kdump.txt
2018 config AUTO_ZRELADDR
2019 bool "Auto calculation of the decompressed kernel image address"
2021 ZRELADDR is the physical address where the decompressed kernel
2022 image will be placed. If AUTO_ZRELADDR is selected, the address
2023 will be determined at run-time by masking the current IP with
2024 0xf8000000. This assumes the zImage being placed in the first 128MB
2025 from start of memory.
2029 menu "CPU Power Management"
2031 source "drivers/cpufreq/Kconfig"
2033 source "drivers/cpuidle/Kconfig"
2037 menu "Floating point emulation"
2039 comment "At least one emulation must be selected"
2042 bool "NWFPE math emulation"
2043 depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2045 Say Y to include the NWFPE floating point emulator in the kernel.
2046 This is necessary to run most binaries. Linux does not currently
2047 support floating point hardware so you need to say Y here even if
2048 your machine has an FPA or floating point co-processor podule.
2050 You may say N here if you are going to load the Acorn FPEmulator
2051 early in the bootup.
2054 bool "Support extended precision"
2055 depends on FPE_NWFPE
2057 Say Y to include 80-bit support in the kernel floating-point
2058 emulator. Otherwise, only 32 and 64-bit support is compiled in.
2059 Note that gcc does not generate 80-bit operations by default,
2060 so in most cases this option only enlarges the size of the
2061 floating point emulator without any good reason.
2063 You almost surely want to say N here.
2066 bool "FastFPE math emulation (EXPERIMENTAL)"
2067 depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2069 Say Y here to include the FAST floating point emulator in the kernel.
2070 This is an experimental much faster emulator which now also has full
2071 precision for the mantissa. It does not support any exceptions.
2072 It is very simple, and approximately 3-6 times faster than NWFPE.
2074 It should be sufficient for most programs. It may be not suitable
2075 for scientific calculations, but you have to check this for yourself.
2076 If you do not feel you need a faster FP emulation you should better
2080 bool "VFP-format floating point maths"
2081 depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2083 Say Y to include VFP support code in the kernel. This is needed
2084 if your hardware includes a VFP unit.
2086 Please see <file:Documentation/arm/VFP/release-notes.txt> for
2087 release notes and additional status information.
2089 Say N if your target does not have VFP hardware.
2097 bool "Advanced SIMD (NEON) Extension support"
2098 depends on VFPv3 && CPU_V7
2100 Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2103 config KERNEL_MODE_NEON
2104 bool "Support for NEON in kernel mode"
2105 depends on NEON && AEABI
2107 Say Y to include support for NEON in kernel mode.
2111 menu "Userspace binary formats"
2113 source "fs/Kconfig.binfmt"
2117 menu "Power management options"
2119 source "kernel/power/Kconfig"
2121 config ARCH_SUSPEND_POSSIBLE
2122 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2123 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2126 config ARM_CPU_SUSPEND
2129 config ARCH_HIBERNATION_POSSIBLE
2132 default y if ARCH_SUSPEND_POSSIBLE
2136 source "net/Kconfig"
2138 source "drivers/Kconfig"
2140 source "drivers/firmware/Kconfig"
2144 source "arch/arm/Kconfig.debug"
2146 source "security/Kconfig"
2148 source "crypto/Kconfig"
2150 source "arch/arm/crypto/Kconfig"
2153 source "lib/Kconfig"
2155 source "arch/arm/kvm/Kconfig"