1 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
4 - compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
5 - reg: address and length of the register set for the device.
6 - interrupts: interrupt for the device
7 - phy: See ethernet.txt file in the same directory.
8 - phy-mode: See ethernet.txt file in the same directory
9 - clocks: List of clocks for this device. At least one clock is
10 mandatory for the core clock. If several clocks are given, then the
11 clock-names property must be used to identify them.
14 - tx-csum-limit: maximum mtu supported by port that allow TX checksum.
15 Value is presented in bytes. If not used, by default 1600B is set for
16 "marvell,armada-370-neta" and 9800B for others.
17 - clock-names: List of names corresponding to clocks property; shall be
18 "core" for core clock and "bus" for the optional bus clock.
24 compatible = "marvell,armada-370-neta";
25 reg = <0xd0070000 0x2500>;
27 clocks = <&gate_clk 4>;
28 tx-csum-limit = <9800>
31 phy-mode = "rgmii-id";