1 * Clock bindings for Freescale i.MX6 Quad
4 - compatible: Should be "fsl,imx6q-ccm"
5 - reg: Address and length of the register set
6 - interrupts: Should contain CCM interrupt
7 - #clock-cells: Should be <1>
10 - fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
12 Use this property if the SoC should be powered off by external power
13 management IC (PMIC) triggered via PMIC_STBY_REQ signal.
14 Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
15 be using "syscon-poweroff" driver instead.
17 The clock consumer should specify the desired clock by having the clock
18 ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
19 for the full list of i.MX6 Quad and DualLite clock IDs.
23 #include <dt-bindings/clock/imx6qdl-clock.h>
26 compatible = "fsl,imx6q-ccm";
27 reg = <0x020c4000 0x4000>;
28 interrupts = <0 87 0x04 0 88 0x04>;
32 uart1: serial@2020000 {
33 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
34 reg = <0x02020000 0x4000>;
35 interrupts = <0 26 0x04>;
36 clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
37 clock-names = "ipg", "per";