| 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | # |
| 3 | # ACPI Configuration |
| 4 | # |
| 5 | |
| 6 | config ARCH_SUPPORTS_ACPI |
| 7 | bool |
| 8 | |
| 9 | menuconfig ACPI |
| 10 | bool "ACPI (Advanced Configuration and Power Interface) Support" |
| 11 | depends on ARCH_SUPPORTS_ACPI |
| 12 | select PNP |
| 13 | select NLS |
| 14 | select CRC32 |
| 15 | default y if X86 |
| 16 | help |
| 17 | Advanced Configuration and Power Interface (ACPI) support for |
| 18 | Linux requires an ACPI-compliant platform (hardware/firmware), |
| 19 | and assumes the presence of OS-directed configuration and power |
| 20 | management (OSPM) software. This option will enlarge your |
| 21 | kernel by about 70K. |
| 22 | |
| 23 | Linux ACPI provides a robust functional replacement for several |
| 24 | legacy configuration and power management interfaces, including |
| 25 | the Plug-and-Play BIOS specification (PnP BIOS), the |
| 26 | MultiProcessor Specification (MPS), and the Advanced Power |
| 27 | Management (APM) specification. If both ACPI and APM support |
| 28 | are configured, ACPI is used. |
| 29 | |
| 30 | The project home page for the Linux ACPI subsystem is here: |
| 31 | <https://01.org/linux-acpi> |
| 32 | |
| 33 | Linux support for ACPI is based on Intel Corporation's ACPI |
| 34 | Component Architecture (ACPI CA). For more information on the |
| 35 | ACPI CA, see: |
| 36 | <https://acpica.org/> |
| 37 | |
| 38 | ACPI is an open industry specification originally co-developed by |
| 39 | Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba. Currently, |
| 40 | it is developed by the ACPI Specification Working Group (ASWG) under |
| 41 | the UEFI Forum and any UEFI member can join the ASWG and contribute |
| 42 | to the ACPI specification. |
| 43 | The specification is available at: |
| 44 | <https://uefi.org/specifications> |
| 45 | |
| 46 | if ACPI |
| 47 | |
| 48 | config ACPI_LEGACY_TABLES_LOOKUP |
| 49 | bool |
| 50 | |
| 51 | config ARCH_MIGHT_HAVE_ACPI_PDC |
| 52 | bool |
| 53 | |
| 54 | config ACPI_GENERIC_GSI |
| 55 | bool |
| 56 | |
| 57 | config ACPI_SYSTEM_POWER_STATES_SUPPORT |
| 58 | bool |
| 59 | |
| 60 | config ACPI_CCA_REQUIRED |
| 61 | bool |
| 62 | |
| 63 | config ACPI_TABLE_LIB |
| 64 | bool |
| 65 | |
| 66 | config ACPI_DEBUGGER |
| 67 | bool "AML debugger interface" |
| 68 | select ACPI_DEBUG |
| 69 | help |
| 70 | Enable in-kernel debugging of AML facilities: statistics, |
| 71 | internal object dump, single step control method execution. |
| 72 | This is still under development, currently enabling this only |
| 73 | results in the compilation of the ACPICA debugger files. |
| 74 | |
| 75 | if ACPI_DEBUGGER |
| 76 | |
| 77 | config ACPI_DEBUGGER_USER |
| 78 | tristate "Userspace debugger accessibility" |
| 79 | depends on DEBUG_FS |
| 80 | help |
| 81 | Export /sys/kernel/debug/acpi/acpidbg for userspace utilities |
| 82 | to access the debugger functionalities. |
| 83 | |
| 84 | endif |
| 85 | |
| 86 | config ACPI_SPCR_TABLE |
| 87 | bool "ACPI Serial Port Console Redirection Support" |
| 88 | default y if X86 |
| 89 | help |
| 90 | Enable support for Serial Port Console Redirection (SPCR) Table. |
| 91 | This table provides information about the configuration of the |
| 92 | earlycon console. |
| 93 | |
| 94 | config ACPI_FPDT |
| 95 | bool "ACPI Firmware Performance Data Table (FPDT) support" |
| 96 | depends on X86_64 |
| 97 | help |
| 98 | Enable support for the Firmware Performance Data Table (FPDT). |
| 99 | This table provides information on the timing of the system |
| 100 | boot, S3 suspend and S3 resume firmware code paths. |
| 101 | |
| 102 | config ACPI_LPIT |
| 103 | bool |
| 104 | depends on X86_64 |
| 105 | default y |
| 106 | |
| 107 | config ACPI_SLEEP |
| 108 | bool |
| 109 | depends on SUSPEND || HIBERNATION |
| 110 | depends on ACPI_SYSTEM_POWER_STATES_SUPPORT |
| 111 | default y |
| 112 | |
| 113 | config ACPI_REV_OVERRIDE_POSSIBLE |
| 114 | bool "Allow supported ACPI revision to be overridden" |
| 115 | depends on X86 |
| 116 | default y |
| 117 | help |
| 118 | The platform firmware on some systems expects Linux to return "5" as |
| 119 | the supported ACPI revision which makes it expose system configuration |
| 120 | information in a special way. |
| 121 | |
| 122 | For example, based on what ACPI exports as the supported revision, |
| 123 | Dell XPS 13 (2015) configures its audio device to either work in HDA |
| 124 | mode or in I2S mode, where the former is supposed to be used on Linux |
| 125 | until the latter is fully supported (in the kernel as well as in user |
| 126 | space). |
| 127 | |
| 128 | This option enables a DMI-based quirk for the above Dell machine (so |
| 129 | that HDA audio is exposed by the platform firmware to the kernel) and |
| 130 | makes it possible to force the kernel to return "5" as the supported |
| 131 | ACPI revision via the "acpi_rev_override" command line switch. |
| 132 | |
| 133 | config ACPI_EC_DEBUGFS |
| 134 | tristate "EC read/write access through /sys/kernel/debug/ec" |
| 135 | help |
| 136 | Say N to disable Embedded Controller /sys/kernel/debug interface |
| 137 | |
| 138 | Be aware that using this interface can confuse your Embedded |
| 139 | Controller in a way that a normal reboot is not enough. You then |
| 140 | have to power off your system, and remove the laptop battery for |
| 141 | some seconds. |
| 142 | An Embedded Controller typically is available on laptops and reads |
| 143 | sensor values like battery state and temperature. |
| 144 | The kernel accesses the EC through ACPI parsed code provided by BIOS |
| 145 | tables. This option allows to access the EC directly without ACPI |
| 146 | code being involved. |
| 147 | Thus this option is a debug option that helps to write ACPI drivers |
| 148 | and can be used to identify ACPI code or EC firmware bugs. |
| 149 | |
| 150 | config ACPI_AC |
| 151 | tristate "AC Adapter" |
| 152 | select POWER_SUPPLY |
| 153 | default y |
| 154 | help |
| 155 | This driver supports the AC Adapter object, which indicates |
| 156 | whether a system is on AC or not. If you have a system that can |
| 157 | switch between A/C and battery, say Y. |
| 158 | |
| 159 | To compile this driver as a module, choose M here: |
| 160 | the module will be called ac. |
| 161 | |
| 162 | config ACPI_BATTERY |
| 163 | tristate "Battery" |
| 164 | select POWER_SUPPLY |
| 165 | default y |
| 166 | help |
| 167 | This driver adds support for battery information through |
| 168 | /proc/acpi/battery. If you have a mobile system with a battery, |
| 169 | say Y. |
| 170 | |
| 171 | To compile this driver as a module, choose M here: |
| 172 | the module will be called battery. |
| 173 | |
| 174 | config ACPI_BUTTON |
| 175 | tristate "Button" |
| 176 | depends on INPUT |
| 177 | default y |
| 178 | help |
| 179 | This driver handles events on the power, sleep, and lid buttons. |
| 180 | A daemon reads events from input devices or via netlink and |
| 181 | performs user-defined actions such as shutting down the system. |
| 182 | This is necessary for software-controlled poweroff. |
| 183 | |
| 184 | To compile this driver as a module, choose M here: |
| 185 | the module will be called button. |
| 186 | |
| 187 | config ACPI_TINY_POWER_BUTTON |
| 188 | tristate "Tiny Power Button Driver" |
| 189 | depends on !ACPI_BUTTON |
| 190 | help |
| 191 | This driver provides a tiny alternative to the ACPI Button driver. |
| 192 | The tiny power button driver only handles the power button. Rather |
| 193 | than notifying userspace via the input layer or a netlink event, this |
| 194 | driver directly signals the init process to shut down. |
| 195 | |
| 196 | This driver is particularly suitable for cloud and VM environments, |
| 197 | which use a simulated power button to initiate a controlled poweroff, |
| 198 | but which may not want to run a separate userspace daemon to process |
| 199 | input events. |
| 200 | |
| 201 | config ACPI_TINY_POWER_BUTTON_SIGNAL |
| 202 | int "Tiny Power Button Signal" |
| 203 | depends on ACPI_TINY_POWER_BUTTON |
| 204 | default 38 |
| 205 | help |
| 206 | Default signal to send to init in response to the power button. |
| 207 | |
| 208 | Likely values here include 38 (SIGRTMIN+4) to power off, or 2 |
| 209 | (SIGINT) to simulate Ctrl+Alt+Del. |
| 210 | |
| 211 | config ACPI_VIDEO |
| 212 | tristate "Video" |
| 213 | depends on BACKLIGHT_CLASS_DEVICE |
| 214 | depends on INPUT |
| 215 | select THERMAL |
| 216 | help |
| 217 | This driver implements the ACPI Extensions For Display Adapters |
| 218 | for integrated graphics devices on motherboard, as specified in |
| 219 | ACPI 2.0 Specification, Appendix B. This supports basic operations |
| 220 | such as defining the video POST device, retrieving EDID information, |
| 221 | and setting up a video output. |
| 222 | |
| 223 | To compile this driver as a module, choose M here: |
| 224 | the module will be called video. |
| 225 | |
| 226 | config ACPI_FAN |
| 227 | tristate "Fan" |
| 228 | depends on THERMAL |
| 229 | default y |
| 230 | help |
| 231 | This driver supports ACPI fan devices, allowing user-mode |
| 232 | applications to perform basic fan control (on, off, status). |
| 233 | |
| 234 | To compile this driver as a module, choose M here: |
| 235 | the module will be called fan. |
| 236 | |
| 237 | config ACPI_TAD |
| 238 | tristate "ACPI Time and Alarm (TAD) Device Support" |
| 239 | depends on SYSFS && PM_SLEEP |
| 240 | help |
| 241 | The ACPI Time and Alarm (TAD) device is an alternative to the Real |
| 242 | Time Clock (RTC). Its wake timers allow the system to transition from |
| 243 | the S3 (or optionally S4/S5) state to S0 state after a time period |
| 244 | elapses. In comparison with the RTC Alarm, the TAD provides a larger |
| 245 | scale of flexibility in the wake timers. The time capabilities of the |
| 246 | TAD maintain the time of day information across platform power |
| 247 | transitions, and keep track of time even when the platform is turned |
| 248 | off. |
| 249 | |
| 250 | config ACPI_DOCK |
| 251 | bool "Dock" |
| 252 | help |
| 253 | This driver supports ACPI-controlled docking stations and removable |
| 254 | drive bays such as the IBM Ultrabay and the Dell Module Bay. |
| 255 | |
| 256 | config ACPI_CPU_FREQ_PSS |
| 257 | bool |
| 258 | |
| 259 | config ACPI_PROCESSOR_CSTATE |
| 260 | def_bool y |
| 261 | depends on ACPI_PROCESSOR |
| 262 | depends on IA64 || X86 |
| 263 | |
| 264 | config ACPI_PROCESSOR_IDLE |
| 265 | bool |
| 266 | select CPU_IDLE |
| 267 | |
| 268 | config ACPI_MCFG |
| 269 | bool |
| 270 | |
| 271 | config ACPI_CPPC_LIB |
| 272 | bool |
| 273 | depends on ACPI_PROCESSOR |
| 274 | select MAILBOX |
| 275 | select PCC |
| 276 | help |
| 277 | If this option is enabled, this file implements common functionality |
| 278 | to parse CPPC tables as described in the ACPI 5.1+ spec. The |
| 279 | routines implemented are meant to be used by other |
| 280 | drivers to control CPU performance using CPPC semantics. |
| 281 | If your platform does not support CPPC in firmware, |
| 282 | leave this option disabled. |
| 283 | |
| 284 | config ACPI_PROCESSOR |
| 285 | tristate "Processor" |
| 286 | depends on X86 || IA64 || ARM64 || LOONGARCH |
| 287 | select ACPI_PROCESSOR_IDLE |
| 288 | select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH |
| 289 | select THERMAL |
| 290 | default y |
| 291 | help |
| 292 | This driver adds support for the ACPI Processor package. It is required |
| 293 | by several flavors of cpufreq performance-state, thermal, throttling and |
| 294 | idle drivers. |
| 295 | |
| 296 | To compile this driver as a module, choose M here: |
| 297 | the module will be called processor. |
| 298 | |
| 299 | config ACPI_IPMI |
| 300 | tristate "IPMI" |
| 301 | depends on IPMI_HANDLER |
| 302 | help |
| 303 | This driver enables the ACPI to access the BMC controller. And it |
| 304 | uses the IPMI request/response message to communicate with BMC |
| 305 | controller, which can be found on the server. |
| 306 | |
| 307 | To compile this driver as a module, choose M here: |
| 308 | the module will be called as acpi_ipmi. |
| 309 | |
| 310 | config ACPI_HOTPLUG_CPU |
| 311 | bool |
| 312 | depends on ACPI_PROCESSOR && HOTPLUG_CPU |
| 313 | select ACPI_CONTAINER |
| 314 | default y |
| 315 | |
| 316 | config ACPI_PROCESSOR_AGGREGATOR |
| 317 | tristate "Processor Aggregator" |
| 318 | depends on ACPI_PROCESSOR |
| 319 | depends on X86 |
| 320 | help |
| 321 | ACPI 4.0 defines processor Aggregator, which enables OS to perform |
| 322 | specific processor configuration and control that applies to all |
| 323 | processors in the platform. Currently only logical processor idling |
| 324 | is defined, which is to reduce power consumption. This driver |
| 325 | supports the new device. |
| 326 | |
| 327 | config ACPI_THERMAL |
| 328 | tristate "Thermal Zone" |
| 329 | depends on ACPI_PROCESSOR |
| 330 | select THERMAL |
| 331 | default y |
| 332 | help |
| 333 | This driver supports ACPI thermal zones. Most mobile and |
| 334 | some desktop systems support ACPI thermal zones. It is HIGHLY |
| 335 | recommended that this option be enabled, as your processor(s) |
| 336 | may be damaged without it. |
| 337 | |
| 338 | To compile this driver as a module, choose M here: |
| 339 | the module will be called thermal. |
| 340 | |
| 341 | config ACPI_PLATFORM_PROFILE |
| 342 | tristate |
| 343 | |
| 344 | config ACPI_CUSTOM_DSDT_FILE |
| 345 | string "Custom DSDT Table file to include" |
| 346 | default "" |
| 347 | depends on !STANDALONE |
| 348 | help |
| 349 | This option supports a custom DSDT by linking it into the kernel. |
| 350 | See Documentation/admin-guide/acpi/dsdt-override.rst |
| 351 | |
| 352 | Enter the full path name to the file which includes the AmlCode |
| 353 | or dsdt_aml_code declaration. |
| 354 | |
| 355 | If unsure, don't enter a file name. |
| 356 | |
| 357 | config ACPI_CUSTOM_DSDT |
| 358 | bool |
| 359 | default ACPI_CUSTOM_DSDT_FILE != "" |
| 360 | |
| 361 | config ARCH_HAS_ACPI_TABLE_UPGRADE |
| 362 | def_bool n |
| 363 | |
| 364 | config ACPI_TABLE_UPGRADE |
| 365 | bool "Allow upgrading ACPI tables via initrd" |
| 366 | depends on BLK_DEV_INITRD && ARCH_HAS_ACPI_TABLE_UPGRADE |
| 367 | default y |
| 368 | help |
| 369 | This option provides functionality to upgrade arbitrary ACPI tables |
| 370 | via initrd. No functional change if no ACPI tables are passed via |
| 371 | initrd, therefore it's safe to say Y. |
| 372 | See Documentation/admin-guide/acpi/initrd_table_override.rst for details |
| 373 | |
| 374 | config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD |
| 375 | bool "Override ACPI tables from built-in initrd" |
| 376 | depends on ACPI_TABLE_UPGRADE |
| 377 | depends on INITRAMFS_SOURCE!="" && INITRAMFS_COMPRESSION_NONE |
| 378 | help |
| 379 | This option provides functionality to override arbitrary ACPI tables |
| 380 | from built-in uncompressed initrd. |
| 381 | |
| 382 | See Documentation/admin-guide/acpi/initrd_table_override.rst for details |
| 383 | |
| 384 | config ACPI_DEBUG |
| 385 | bool "Debug Statements" |
| 386 | help |
| 387 | The ACPI subsystem can produce debug output. Saying Y enables this |
| 388 | output and increases the kernel size by around 50K. |
| 389 | |
| 390 | Use the acpi.debug_layer and acpi.debug_level kernel command-line |
| 391 | parameters documented in Documentation/firmware-guide/acpi/debug.rst and |
| 392 | Documentation/admin-guide/kernel-parameters.rst to control the type and |
| 393 | amount of debug output. |
| 394 | |
| 395 | config ACPI_PCI_SLOT |
| 396 | bool "PCI slot detection driver" |
| 397 | depends on SYSFS && PCI |
| 398 | help |
| 399 | This driver creates entries in /sys/bus/pci/slots/ for all PCI |
| 400 | slots in the system. This can help correlate PCI bus addresses, |
| 401 | i.e., segment/bus/device/function tuples, with physical slots in |
| 402 | the system. If you are unsure, say N. |
| 403 | |
| 404 | config ACPI_CONTAINER |
| 405 | bool "Container and Module Devices" |
| 406 | default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU) |
| 407 | help |
| 408 | This driver supports ACPI Container and Module devices (IDs |
| 409 | ACPI0004, PNP0A05, and PNP0A06). |
| 410 | |
| 411 | This helps support hotplug of nodes, CPUs, and memory. |
| 412 | |
| 413 | config ACPI_HOTPLUG_MEMORY |
| 414 | bool "Memory Hotplug" |
| 415 | depends on MEMORY_HOTPLUG |
| 416 | help |
| 417 | This driver supports ACPI memory hotplug. The driver |
| 418 | fields notifications on ACPI memory devices (PNP0C80), |
| 419 | which represent memory ranges that may be onlined or |
| 420 | offlined during runtime. |
| 421 | |
| 422 | If your hardware and firmware do not support adding or |
| 423 | removing memory devices at runtime, you need not enable |
| 424 | this driver. |
| 425 | |
| 426 | config ACPI_HOTPLUG_IOAPIC |
| 427 | bool |
| 428 | depends on PCI |
| 429 | depends on X86_IO_APIC |
| 430 | default y |
| 431 | |
| 432 | config ACPI_SBS |
| 433 | tristate "Smart Battery System" |
| 434 | depends on X86 |
| 435 | select POWER_SUPPLY |
| 436 | help |
| 437 | This driver supports the Smart Battery System, another |
| 438 | type of access to battery information, found on some laptops. |
| 439 | |
| 440 | To compile this driver as a module, choose M here: |
| 441 | the modules will be called sbs and sbshc. |
| 442 | |
| 443 | config ACPI_HED |
| 444 | tristate "Hardware Error Device" |
| 445 | help |
| 446 | This driver supports the Hardware Error Device (PNP0C33), |
| 447 | which is used to report some hardware errors notified via |
| 448 | SCI, mainly the corrected errors. |
| 449 | |
| 450 | config ACPI_CUSTOM_METHOD |
| 451 | tristate "Allow ACPI methods to be inserted/replaced at run time" |
| 452 | depends on DEBUG_FS |
| 453 | help |
| 454 | This debug facility allows ACPI AML methods to be inserted and/or |
| 455 | replaced without rebooting the system. For details refer to: |
| 456 | Documentation/firmware-guide/acpi/method-customizing.rst. |
| 457 | |
| 458 | NOTE: This option is security sensitive, because it allows arbitrary |
| 459 | kernel memory to be written to by root (uid=0) users, allowing them |
| 460 | to bypass certain security measures (e.g. if root is not allowed to |
| 461 | load additional kernel modules after boot, this feature may be used |
| 462 | to override that restriction). |
| 463 | |
| 464 | config ACPI_BGRT |
| 465 | bool "Boottime Graphics Resource Table support" |
| 466 | depends on EFI && (X86 || ARM64) |
| 467 | help |
| 468 | This driver adds support for exposing the ACPI Boottime Graphics |
| 469 | Resource Table, which allows the operating system to obtain |
| 470 | data from the firmware boot splash. It will appear under |
| 471 | /sys/firmware/acpi/bgrt/ . |
| 472 | |
| 473 | config ACPI_REDUCED_HARDWARE_ONLY |
| 474 | bool "Hardware-reduced ACPI support only" if EXPERT |
| 475 | def_bool n |
| 476 | help |
| 477 | This config item changes the way the ACPI code is built. When this |
| 478 | option is selected, the kernel will use a specialized version of |
| 479 | ACPICA that ONLY supports the ACPI "reduced hardware" mode. The |
| 480 | resulting kernel will be smaller but it will also be restricted to |
| 481 | running in ACPI reduced hardware mode ONLY. |
| 482 | |
| 483 | If you are unsure what to do, do not enable this option. |
| 484 | |
| 485 | source "drivers/acpi/nfit/Kconfig" |
| 486 | source "drivers/acpi/numa/Kconfig" |
| 487 | source "drivers/acpi/apei/Kconfig" |
| 488 | source "drivers/acpi/dptf/Kconfig" |
| 489 | |
| 490 | config ACPI_WATCHDOG |
| 491 | bool |
| 492 | |
| 493 | config ACPI_EXTLOG |
| 494 | tristate "Extended Error Log support" |
| 495 | depends on X86_MCE && X86_LOCAL_APIC && EDAC |
| 496 | select UEFI_CPER |
| 497 | help |
| 498 | Certain usages such as Predictive Failure Analysis (PFA) require |
| 499 | more information about the error than what can be described in |
| 500 | processor machine check banks. Most server processors log |
| 501 | additional information about the error in processor uncore |
| 502 | registers. Since the addresses and layout of these registers vary |
| 503 | widely from one processor to another, system software cannot |
| 504 | readily make use of them. To complicate matters further, some of |
| 505 | the additional error information cannot be constructed without |
| 506 | detailed knowledge about platform topology. |
| 507 | |
| 508 | Enhanced MCA Logging allows firmware to provide additional error |
| 509 | information to system software, synchronous with MCE or CMCI. This |
| 510 | driver adds support for that functionality with corresponding |
| 511 | tracepoint which carries that information to userspace. |
| 512 | |
| 513 | config ACPI_ADXL |
| 514 | bool |
| 515 | |
| 516 | config ACPI_CONFIGFS |
| 517 | tristate "ACPI configfs support" |
| 518 | select CONFIGFS_FS |
| 519 | help |
| 520 | Select this option to enable support for ACPI configuration from |
| 521 | userspace. The configurable ACPI groups will be visible under |
| 522 | /config/acpi, assuming configfs is mounted under /config. |
| 523 | |
| 524 | config ACPI_PFRUT |
| 525 | tristate "ACPI Platform Firmware Runtime Update and Telemetry" |
| 526 | depends on 64BIT |
| 527 | help |
| 528 | This mechanism allows certain pieces of the platform firmware |
| 529 | to be updated on the fly while the system is running (runtime) |
| 530 | without the need to restart it, which is key in the cases when |
| 531 | the system needs to be available 100% of the time and it cannot |
| 532 | afford the downtime related to restarting it, or when the work |
| 533 | carried out by the system is particularly important, so it cannot |
| 534 | be interrupted, and it is not practical to wait until it is complete. |
| 535 | |
| 536 | The existing firmware code can be modified (driver update) or |
| 537 | extended by adding new code to the firmware (code injection). |
| 538 | |
| 539 | Besides, the telemetry driver allows user space to fetch telemetry |
| 540 | data from the firmware with the help of the Platform Firmware Runtime |
| 541 | Telemetry interface. |
| 542 | |
| 543 | To compile the drivers as modules, choose M here: |
| 544 | the modules will be called pfr_update and pfr_telemetry. |
| 545 | |
| 546 | if ARM64 |
| 547 | source "drivers/acpi/arm64/Kconfig" |
| 548 | |
| 549 | config ACPI_PPTT |
| 550 | bool |
| 551 | endif |
| 552 | |
| 553 | config ACPI_PCC |
| 554 | bool "ACPI PCC Address Space" |
| 555 | depends on PCC |
| 556 | default y |
| 557 | help |
| 558 | The PCC Address Space also referred as PCC Operation Region pertains |
| 559 | to the region of PCC subspace that succeeds the PCC signature. |
| 560 | |
| 561 | The PCC Operation Region works in conjunction with the PCC Table |
| 562 | (Platform Communications Channel Table). PCC subspaces that are |
| 563 | marked for use as PCC Operation Regions must not be used as PCC |
| 564 | subspaces for the standard ACPI features such as CPPC, RASF, PDTT and |
| 565 | MPST. These standard features must always use the PCC Table instead. |
| 566 | |
| 567 | Enable this feature if you want to set up and install the PCC Address |
| 568 | Space handler to handle PCC OpRegion in the firmware. |
| 569 | |
| 570 | source "drivers/acpi/pmic/Kconfig" |
| 571 | |
| 572 | config ACPI_VIOT |
| 573 | bool |
| 574 | |
| 575 | config ACPI_PRMT |
| 576 | bool "Platform Runtime Mechanism Support" |
| 577 | depends on EFI && (X86_64 || ARM64) |
| 578 | default y |
| 579 | help |
| 580 | Platform Runtime Mechanism (PRM) is a firmware interface exposing a |
| 581 | set of binary executables that can be called from the AML interpreter |
| 582 | or directly from device drivers. |
| 583 | |
| 584 | Say Y to enable the AML interpreter to execute the PRM code. |
| 585 | |
| 586 | While this feature is optional in principle, leaving it out may |
| 587 | substantially increase computational overhead related to the |
| 588 | initialization of some server systems. |
| 589 | |
| 590 | endif # ACPI |
| 591 | |
| 592 | config X86_PM_TIMER |
| 593 | bool "Power Management Timer Support" if EXPERT |
| 594 | depends on X86 && (ACPI || JAILHOUSE_GUEST) |
| 595 | default y |
| 596 | help |
| 597 | The Power Management Timer is available on all ACPI-capable, |
| 598 | in most cases even if ACPI is unusable or blacklisted. |
| 599 | |
| 600 | This timing source is not affected by power management features |
| 601 | like aggressive processor idling, throttling, frequency and/or |
| 602 | voltage scaling, unlike the commonly used Time Stamp Counter |
| 603 | (TSC) timing source. |
| 604 | |
| 605 | You should nearly always say Y here because many modern |
| 606 | systems require this timer. |