[linux-2.6-block.git] / arch / x86 / xen / setup.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Machine specific setup for xen
 *
 * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
 */

#include <linux/init.h>
#include <linux/iscsi_ibft.h>
#include <linux/sched.h>
#include <linux/kstrtox.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/memblock.h>
#include <linux/cpuidle.h>
#include <linux/cpufreq.h>
#include <linux/memory_hotplug.h>
#include <linux/acpi.h>

#include <asm/elf.h>
#include <asm/vdso.h>
#include <asm/e820/api.h>
#include <asm/setup.h>
#include <asm/numa.h>
#include <asm/idtentry.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>

#include <xen/xen.h>
#include <xen/page.h>
#include <xen/interface/callback.h>
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
#include <xen/features.h>
#include <xen/hvc-console.h>
#include "xen-ops.h"

#define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024)

/* Memory map would allow PCI passthrough. */
bool xen_pv_pci_possible;

/* E820 map used during setting up memory. */
static struct e820_table xen_e820_table __initdata;

/* Number of initially usable memory pages. */
static unsigned long ini_nr_pages __initdata;

/*
 * Buffer used to remap identity mapped pages. We only need the virtual space.
 * The physical page behind this address is remapped as needed to different
 * buffer pages.
 */
#define REMAP_SIZE	(P2M_PER_PAGE - 3)
static struct {
	unsigned long	next_area_mfn;
	unsigned long	target_pfn;
	unsigned long	size;
	unsigned long	mfns[REMAP_SIZE];
} xen_remap_buf __initdata __aligned(PAGE_SIZE);
static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY;

static bool xen_512gb_limit __initdata = IS_ENABLED(CONFIG_XEN_512GB);

static void __init xen_parse_512gb(void)
{
	bool val = false;
	char *arg;

	arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit");
	if (!arg)
		return;

	arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit=");
	if (!arg)
		val = true;
	else if (kstrtobool(arg + strlen("xen_512gb_limit="), &val))
		return;

	xen_512gb_limit = val;
}

static void __init xen_del_extra_mem(unsigned long start_pfn,
				     unsigned long n_pfns)
{
	int i;
	unsigned long start_r, size_r;

	for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
		start_r = xen_extra_mem[i].start_pfn;
		size_r = xen_extra_mem[i].n_pfns;

		/* Start of region. */
		if (start_r == start_pfn) {
			BUG_ON(n_pfns > size_r);
			xen_extra_mem[i].start_pfn += n_pfns;
			xen_extra_mem[i].n_pfns -= n_pfns;
			break;
		}
		/* End of region. */
		if (start_r + size_r == start_pfn + n_pfns) {
			BUG_ON(n_pfns > size_r);
			xen_extra_mem[i].n_pfns -= n_pfns;
			break;
		}
		/* Mid of region. */
		if (start_pfn > start_r && start_pfn < start_r + size_r) {
			BUG_ON(start_pfn + n_pfns > start_r + size_r);
			xen_extra_mem[i].n_pfns = start_pfn - start_r;
			/* Calling memblock_reserve() again is okay. */
			xen_add_extra_mem(start_pfn + n_pfns, start_r + size_r -
					  (start_pfn + n_pfns));
			break;
		}
	}
	memblock_phys_free(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns));
}

/*
 * Called during boot before the p2m list can take entries beyond the
 * hypervisor supplied p2m list. Entries in extra mem are to be regarded as
 * invalid.
 */
unsigned long __ref xen_chk_extra_mem(unsigned long pfn)
{
	int i;

	for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
		if (pfn >= xen_extra_mem[i].start_pfn &&
		    pfn < xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns)
			return INVALID_P2M_ENTRY;
	}

	return IDENTITY_FRAME(pfn);
}

/*
 * Mark all pfns of extra mem as invalid in p2m list.
 */
void __init xen_inv_extra_mem(void)
{
	unsigned long pfn, pfn_s, pfn_e;
	int i;

	for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
		if (!xen_extra_mem[i].n_pfns)
			continue;
		pfn_s = xen_extra_mem[i].start_pfn;
		pfn_e = pfn_s + xen_extra_mem[i].n_pfns;
		for (pfn = pfn_s; pfn < pfn_e; pfn++)
			set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
	}
}

/*
 * Finds the next RAM pfn available in the E820 map after min_pfn.
 * This function updates min_pfn with the pfn found and returns
 * the size of that range or zero if not found.
 */
static unsigned long __init xen_find_pfn_range(unsigned long *min_pfn)
{
	const struct e820_entry *entry = xen_e820_table.entries;
	unsigned int i;
	unsigned long done = 0;

	for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
		unsigned long s_pfn;
		unsigned long e_pfn;

		if (entry->type != E820_TYPE_RAM)
			continue;

		e_pfn = PFN_DOWN(entry->addr + entry->size);

		/* We only care about E820 after this */
		if (e_pfn <= *min_pfn)
			continue;

		s_pfn = PFN_UP(entry->addr);

		/* If min_pfn falls within the E820 entry, we want to start
		 * at the min_pfn PFN.
		 */
		if (s_pfn <= *min_pfn) {
			done = e_pfn - *min_pfn;
		} else {
			done = e_pfn - s_pfn;
			*min_pfn = s_pfn;
		}
		break;
	}

	return done;
}

static int __init xen_free_mfn(unsigned long mfn)
{
	struct xen_memory_reservation reservation = {
		.address_bits = 0,
		.extent_order = 0,
		.domid        = DOMID_SELF
	};

	set_xen_guest_handle(reservation.extent_start, &mfn);
	reservation.nr_extents = 1;

	return HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation);
}

/*
 * This releases a chunk of memory and then does the identity map. It's used
 * as a fallback if the remapping fails.
 */
static void __init xen_set_identity_and_release_chunk(unsigned long start_pfn,
						      unsigned long end_pfn)
{
	unsigned long pfn, end;
	int ret;

	WARN_ON(start_pfn > end_pfn);

	/* Release pages first. */
	end = min(end_pfn, ini_nr_pages);
	for (pfn = start_pfn; pfn < end; pfn++) {
		unsigned long mfn = pfn_to_mfn(pfn);

		/* Make sure pfn exists to start with */
		if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
			continue;

		ret = xen_free_mfn(mfn);
		WARN(ret != 1, "Failed to release pfn %lx err=%d\n", pfn, ret);

		if (ret == 1) {
			xen_released_pages++;
			if (!__set_phys_to_machine(pfn, INVALID_P2M_ENTRY))
				break;
		} else
			break;
	}

	set_phys_range_identity(start_pfn, end_pfn);
}

/*
 * Helper function to update the p2m and m2p tables and kernel mapping.
 */
static void __init xen_update_mem_tables(unsigned long pfn, unsigned long mfn)
{
	struct mmu_update update = {
		.ptr = ((uint64_t)mfn << PAGE_SHIFT) | MMU_MACHPHYS_UPDATE,
		.val = pfn
	};

	/* Update p2m */
	if (!set_phys_to_machine(pfn, mfn)) {
		WARN(1, "Failed to set p2m mapping for pfn=%ld mfn=%ld\n",
		     pfn, mfn);
		BUG();
	}

	/* Update m2p */
	if (HYPERVISOR_mmu_update(&update, 1, NULL, DOMID_SELF) < 0) {
		WARN(1, "Failed to set m2p mapping for mfn=%ld pfn=%ld\n",
		     mfn, pfn);
		BUG();
	}

	if (HYPERVISOR_update_va_mapping((unsigned long)__va(pfn << PAGE_SHIFT),
					 mfn_pte(mfn, PAGE_KERNEL), 0)) {
		WARN(1, "Failed to update kernel mapping for mfn=%ld pfn=%ld\n",
		      mfn, pfn);
		BUG();
	}
}

/*
 * This function updates the p2m and m2p tables with an identity map from
 * start_pfn to start_pfn+size and prepares remapping the underlying RAM of the
 * original allocation at remap_pfn. The information needed for remapping is
 * saved in the memory itself to avoid the need for allocating buffers. The
 * complete remap information is contained in a list of MFNs each containing
 * up to REMAP_SIZE MFNs and the start target PFN for doing the remap.
 * This enables us to preserve the original mfn sequence while doing the
 * remapping at a time when the memory management is capable of allocating
 * virtual and physical memory in arbitrary amounts, see 'xen_remap_memory' and
 * its callers.
 */
static void __init xen_do_set_identity_and_remap_chunk(
        unsigned long start_pfn, unsigned long size, unsigned long remap_pfn)
{
	unsigned long buf = (unsigned long)&xen_remap_buf;
	unsigned long mfn_save, mfn;
	unsigned long ident_pfn_iter, remap_pfn_iter;
	unsigned long ident_end_pfn = start_pfn + size;
	unsigned long left = size;
	unsigned int i, chunk;

	WARN_ON(size == 0);

	mfn_save = virt_to_mfn((void *)buf);

	for (ident_pfn_iter = start_pfn, remap_pfn_iter = remap_pfn;
	     ident_pfn_iter < ident_end_pfn;
	     ident_pfn_iter += REMAP_SIZE, remap_pfn_iter += REMAP_SIZE) {
		chunk = (left < REMAP_SIZE) ? left : REMAP_SIZE;

		/* Map first pfn to xen_remap_buf */
		mfn = pfn_to_mfn(ident_pfn_iter);
		set_pte_mfn(buf, mfn, PAGE_KERNEL);

		/* Save mapping information in page */
		xen_remap_buf.next_area_mfn = xen_remap_mfn;
		xen_remap_buf.target_pfn = remap_pfn_iter;
		xen_remap_buf.size = chunk;
		for (i = 0; i < chunk; i++)
			xen_remap_buf.mfns[i] = pfn_to_mfn(ident_pfn_iter + i);

		/* Put remap buf into list. */
		xen_remap_mfn = mfn;

		/* Set identity map */
		set_phys_range_identity(ident_pfn_iter, ident_pfn_iter + chunk);

		left -= chunk;
	}

	/* Restore old xen_remap_buf mapping */
	set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
}

/*
 * This function takes a contiguous pfn range that needs to be identity mapped
 * and:
 *
 *  1) Finds a new range of pfns to use to remap based on E820 and remap_pfn.
 *  2) Calls the do_ function to actually do the mapping/remapping work.
 *
 * The goal is to not allocate additional memory but to remap the existing
 * pages. In the case of an error the underlying memory is simply released back
 * to Xen and not remapped.
 */
static unsigned long __init xen_set_identity_and_remap_chunk(
	unsigned long start_pfn, unsigned long end_pfn, unsigned long remap_pfn)
{
	unsigned long pfn;
	unsigned long i = 0;
	unsigned long n = end_pfn - start_pfn;

	if (remap_pfn == 0)
		remap_pfn = ini_nr_pages;

	while (i < n) {
		unsigned long cur_pfn = start_pfn + i;
		unsigned long left = n - i;
		unsigned long size = left;
		unsigned long remap_range_size;

		/* Do not remap pages beyond the current allocation */
		if (cur_pfn >= ini_nr_pages) {
			/* Identity map remaining pages */
			set_phys_range_identity(cur_pfn, cur_pfn + size);
			break;
		}
		if (cur_pfn + size > ini_nr_pages)
			size = ini_nr_pages - cur_pfn;

		remap_range_size = xen_find_pfn_range(&remap_pfn);
		if (!remap_range_size) {
			pr_warn("Unable to find available pfn range, not remapping identity pages\n");
			xen_set_identity_and_release_chunk(cur_pfn,
							   cur_pfn + left);
			break;
		}
		/* Adjust size to fit in current e820 RAM region */
		if (size > remap_range_size)
			size = remap_range_size;

		xen_do_set_identity_and_remap_chunk(cur_pfn, size, remap_pfn);

		/* Update variables to reflect new mappings. */
		i += size;
		remap_pfn += size;
	}

	/*
	 * If the PFNs are currently mapped, their VA mappings need to be
	 * zapped.
	 */
	for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
		(void)HYPERVISOR_update_va_mapping(
			(unsigned long)__va(pfn << PAGE_SHIFT),
			native_make_pte(0), 0);

	return remap_pfn;
}

static unsigned long __init xen_count_remap_pages(
	unsigned long start_pfn, unsigned long end_pfn,
	unsigned long remap_pages)
{
	if (start_pfn >= ini_nr_pages)
		return remap_pages;

	return remap_pages + min(end_pfn, ini_nr_pages) - start_pfn;
}

static unsigned long __init xen_foreach_remap_area(
	unsigned long (*func)(unsigned long start_pfn, unsigned long end_pfn,
			      unsigned long last_val))
{
	phys_addr_t start = 0;
	unsigned long ret_val = 0;
	const struct e820_entry *entry = xen_e820_table.entries;
	int i;

	/*
	 * Combine non-RAM regions and gaps until a RAM region (or the
	 * end of the map) is reached, then call the provided function
	 * to perform its duty on the non-RAM region.
	 *
	 * The combined non-RAM regions are rounded to a whole number
	 * of pages so any partial pages are accessible via the 1:1
	 * mapping.  This is needed for some BIOSes that put (for
	 * example) the DMI tables in a reserved region that begins on
	 * a non-page boundary.
	 */
	for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
		phys_addr_t end = entry->addr + entry->size;
		if (entry->type == E820_TYPE_RAM || i == xen_e820_table.nr_entries - 1) {
			unsigned long start_pfn = PFN_DOWN(start);
			unsigned long end_pfn = PFN_UP(end);

			if (entry->type == E820_TYPE_RAM)
				end_pfn = PFN_UP(entry->addr);

			if (start_pfn < end_pfn)
				ret_val = func(start_pfn, end_pfn, ret_val);
			start = end;
		}
	}

	return ret_val;
}

/*
 * Remap the memory prepared in xen_do_set_identity_and_remap_chunk().
 * The remap information (which mfn remap to which pfn) is contained in the
 * to be remapped memory itself in a linked list anchored at xen_remap_mfn.
 * This scheme allows to remap the different chunks in arbitrary order while
 * the resulting mapping will be independent from the order.
 */
void __init xen_remap_memory(void)
{
	unsigned long buf = (unsigned long)&xen_remap_buf;
	unsigned long mfn_save, pfn;
	unsigned long remapped = 0;
	unsigned int i;
	unsigned long pfn_s = ~0UL;
	unsigned long len = 0;

	mfn_save = virt_to_mfn((void *)buf);

	while (xen_remap_mfn != INVALID_P2M_ENTRY) {
		/* Map the remap information */
		set_pte_mfn(buf, xen_remap_mfn, PAGE_KERNEL);

		BUG_ON(xen_remap_mfn != xen_remap_buf.mfns[0]);

		pfn = xen_remap_buf.target_pfn;
		for (i = 0; i < xen_remap_buf.size; i++) {
			xen_update_mem_tables(pfn, xen_remap_buf.mfns[i]);
			remapped++;
			pfn++;
		}
		if (pfn_s == ~0UL || pfn == pfn_s) {
			pfn_s = xen_remap_buf.target_pfn;
			len += xen_remap_buf.size;
		} else if (pfn_s + len == xen_remap_buf.target_pfn) {
			len += xen_remap_buf.size;
		} else {
			xen_del_extra_mem(pfn_s, len);
			pfn_s = xen_remap_buf.target_pfn;
			len = xen_remap_buf.size;
		}
		xen_remap_mfn = xen_remap_buf.next_area_mfn;
	}

	if (pfn_s != ~0UL && len)
		xen_del_extra_mem(pfn_s, len);

	set_pte_mfn(buf, mfn_save, PAGE_KERNEL);

	pr_info("Remapped %ld page(s)\n", remapped);

	xen_do_remap_nonram();
}

static unsigned long __init xen_get_pages_limit(void)
{
	unsigned long limit;

	limit = MAXMEM / PAGE_SIZE;
	if (!xen_initial_domain() && xen_512gb_limit)
		limit = GB(512) / PAGE_SIZE;

	return limit;
}

static unsigned long __init xen_get_max_pages(void)
{
	unsigned long max_pages, limit;
	domid_t domid = DOMID_SELF;
	long ret;

	limit = xen_get_pages_limit();
	max_pages = limit;

	/*
	 * For the initial domain we use the maximum reservation as
	 * the maximum page.
	 *
	 * For guest domains the current maximum reservation reflects
	 * the current maximum rather than the static maximum. In this
	 * case the e820 map provided to us will cover the static
	 * maximum region.
	 */
	if (xen_initial_domain()) {
		ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
		if (ret > 0)
			max_pages = ret;
	}

	return min(max_pages, limit);
}

static void __init xen_align_and_add_e820_region(phys_addr_t start,
						 phys_addr_t size, int type)
{
	phys_addr_t end = start + size;

	/* Align RAM regions to page boundaries. */
	if (type == E820_TYPE_RAM) {
		start = PAGE_ALIGN(start);
		end &= ~((phys_addr_t)PAGE_SIZE - 1);
#ifdef CONFIG_MEMORY_HOTPLUG
		/*
		 * Don't allow adding memory not in E820 map while booting the
		 * system. Once the balloon driver is up it will remove that
		 * restriction again.
		 */
		max_mem_size = end;
#endif
	}

	e820__range_add(start, end - start, type);
}

static void __init xen_ignore_unusable(void)
{
	struct e820_entry *entry = xen_e820_table.entries;
	unsigned int i;

	for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
		if (entry->type == E820_TYPE_UNUSABLE)
			entry->type = E820_TYPE_RAM;
	}
}

static bool __init xen_is_e820_reserved(phys_addr_t start, phys_addr_t size)
{
	struct e820_entry *entry;
	unsigned mapcnt;
	phys_addr_t end;

	if (!size)
		return false;

	end = start + size;
	entry = xen_e820_table.entries;

	for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++) {
		if (entry->type == E820_TYPE_RAM && entry->addr <= start &&
		    (entry->addr + entry->size) >= end)
			return false;

		entry++;
	}

	return true;
}

/*
 * Find a free area in physical memory not yet reserved and compliant with
 * E820 map.
 * Used to relocate pre-allocated areas like initrd or p2m list which are in
 * conflict with the to be used E820 map.
 * In case no area is found, return 0. Otherwise return the physical address
 * of the area which is already reserved for convenience.
 */
phys_addr_t __init xen_find_free_area(phys_addr_t size)
{
	unsigned mapcnt;
	phys_addr_t addr, start;
	struct e820_entry *entry = xen_e820_table.entries;

	for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++, entry++) {
		if (entry->type != E820_TYPE_RAM || entry->size < size)
			continue;
		start = entry->addr;
		for (addr = start; addr < start + size; addr += PAGE_SIZE) {
			if (!memblock_is_reserved(addr))
				continue;
			start = addr + PAGE_SIZE;
			if (start + size > entry->addr + entry->size)
				break;
		}
		if (addr >= start + size) {
			memblock_reserve(start, size);
			return start;
		}
	}

	return 0;
}

/*
 * Swap a non-RAM E820 map entry with RAM above ini_nr_pages.
 * Note that the E820 map is modified accordingly, but the P2M map isn't yet.
 * The adaption of the P2M must be deferred until page allocation is possible.
 */
static void __init xen_e820_swap_entry_with_ram(struct e820_entry *swap_entry)
{
	struct e820_entry *entry;
	unsigned int mapcnt;
	phys_addr_t mem_end = PFN_PHYS(ini_nr_pages);
	phys_addr_t swap_addr, swap_size, entry_end;

	swap_addr = PAGE_ALIGN_DOWN(swap_entry->addr);
	swap_size = PAGE_ALIGN(swap_entry->addr - swap_addr + swap_entry->size);
	entry = xen_e820_table.entries;

	for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++) {
		entry_end = entry->addr + entry->size;
		if (entry->type == E820_TYPE_RAM && entry->size >= swap_size &&
		    entry_end - swap_size >= mem_end) {
			/* Reduce RAM entry by needed space (whole pages). */
			entry->size -= swap_size;

			/* Add new entry at the end of E820 map. */
			entry = xen_e820_table.entries +
				xen_e820_table.nr_entries;
			xen_e820_table.nr_entries++;

			/* Fill new entry (keep size and page offset). */
			entry->type = swap_entry->type;
			entry->addr = entry_end - swap_size +
				      swap_addr - swap_entry->addr;
			entry->size = swap_entry->size;

			/* Convert old entry to RAM, align to pages. */
			swap_entry->type = E820_TYPE_RAM;
			swap_entry->addr = swap_addr;
			swap_entry->size = swap_size;

			/* Remember PFN<->MFN relation for P2M update. */
			xen_add_remap_nonram(swap_addr, entry_end - swap_size,
					     swap_size);

			/* Order E820 table and merge entries. */
			e820__update_table(&xen_e820_table);

			return;
		}

		entry++;
	}

	xen_raw_console_write("No suitable area found for required E820 entry remapping action\n");
	BUG();
}

/*
 * Look for non-RAM memory types in a specific guest physical area and move
 * those away if possible (ACPI NVS only for now).
 */
static void __init xen_e820_resolve_conflicts(phys_addr_t start,
					      phys_addr_t size)
{
	struct e820_entry *entry;
	unsigned int mapcnt;
	phys_addr_t end;

	if (!size)
		return;

	end = start + size;
	entry = xen_e820_table.entries;

	for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++) {
		if (entry->addr >= end)
			return;

		if (entry->addr + entry->size > start &&
		    entry->type == E820_TYPE_NVS)
			xen_e820_swap_entry_with_ram(entry);

		entry++;
	}
}

/*
 * Check for an area in physical memory to be usable for non-movable purposes.
 * An area is considered to usable if the used E820 map lists it to be RAM or
 * some other type which can be moved to higher PFNs while keeping the MFNs.
 * In case the area is not usable, crash the system with an error message.
 */
void __init xen_chk_is_e820_usable(phys_addr_t start, phys_addr_t size,
				   const char *component)
{
	xen_e820_resolve_conflicts(start, size);

	if (!xen_is_e820_reserved(start, size))
		return;

	xen_raw_console_write("Xen hypervisor allocated ");
	xen_raw_console_write(component);
	xen_raw_console_write(" memory conflicts with E820 map\n");
	BUG();
}

/*
 * Like memcpy, but with physical addresses for dest and src.
 */
static void __init xen_phys_memcpy(phys_addr_t dest, phys_addr_t src,
				   phys_addr_t n)
{
	phys_addr_t dest_off, src_off, dest_len, src_len, len;
	void *from, *to;

	while (n) {
		dest_off = dest & ~PAGE_MASK;
		src_off = src & ~PAGE_MASK;
		dest_len = n;
		if (dest_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off)
			dest_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off;
		src_len = n;
		if (src_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off)
			src_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off;
		len = min(dest_len, src_len);
		to = early_memremap(dest - dest_off, dest_len + dest_off);
		from = early_memremap(src - src_off, src_len + src_off);
		memcpy(to, from, len);
		early_memunmap(to, dest_len + dest_off);
		early_memunmap(from, src_len + src_off);
		n -= len;
		dest += len;
		src += len;
	}
}

/*
 * Reserve Xen mfn_list.
 */
static void __init xen_reserve_xen_mfnlist(void)
{
	phys_addr_t start, size;

	if (xen_start_info->mfn_list >= __START_KERNEL_map) {
		start = __pa(xen_start_info->mfn_list);
		size = PFN_ALIGN(xen_start_info->nr_pages *
				 sizeof(unsigned long));
	} else {
		start = PFN_PHYS(xen_start_info->first_p2m_pfn);
		size = PFN_PHYS(xen_start_info->nr_p2m_frames);
	}

	memblock_reserve(start, size);
	if (!xen_is_e820_reserved(start, size))
		return;

	xen_relocate_p2m();
	memblock_phys_free(start, size);
}

/**
 * xen_memory_setup - Hook for machine specific memory setup.
 **/
char * __init xen_memory_setup(void)
{
	unsigned long pfn_s, n_pfns;
	phys_addr_t mem_end, addr, size, chunk_size;
	u32 type;
	int rc;
	struct xen_memory_map memmap;
	unsigned long max_pages;
	unsigned long extra_pages = 0;
	unsigned long maxmem_pages;
	int i;
	int op;

	xen_parse_512gb();
	ini_nr_pages = min(xen_get_pages_limit(), xen_start_info->nr_pages);
	mem_end = PFN_PHYS(ini_nr_pages);

	memmap.nr_entries = ARRAY_SIZE(xen_e820_table.entries);
	set_xen_guest_handle(memmap.buffer, xen_e820_table.entries);

#if defined(CONFIG_MEMORY_HOTPLUG) && defined(CONFIG_XEN_BALLOON)
	xen_saved_max_mem_size = max_mem_size;
#endif

	op = xen_initial_domain() ?
		XENMEM_machine_memory_map :
		XENMEM_memory_map;
	rc = HYPERVISOR_memory_op(op, &memmap);
	if (rc == -ENOSYS) {
		BUG_ON(xen_initial_domain());
		memmap.nr_entries = 1;
		xen_e820_table.entries[0].addr = 0ULL;
		xen_e820_table.entries[0].size = mem_end;
		/* 8MB slack (to balance backend allocations). */
		xen_e820_table.entries[0].size += 8ULL << 20;
		xen_e820_table.entries[0].type = E820_TYPE_RAM;
		rc = 0;
	}
	BUG_ON(rc);
	BUG_ON(memmap.nr_entries == 0);
	xen_e820_table.nr_entries = memmap.nr_entries;

	if (xen_initial_domain()) {
		/*
		 * Xen won't allow a 1:1 mapping to be created to UNUSABLE
		 * regions, so if we're using the machine memory map leave the
		 * region as RAM as it is in the pseudo-physical map.
		 *
		 * UNUSABLE regions in domUs are not handled and will need
		 * a patch in the future.
		 */
		xen_ignore_unusable();

#ifdef CONFIG_ISCSI_IBFT_FIND
		/* Reserve 0.5 MiB to 1 MiB region so iBFT can be found */
		xen_e820_table.entries[xen_e820_table.nr_entries].addr = IBFT_START;
		xen_e820_table.entries[xen_e820_table.nr_entries].size = IBFT_END - IBFT_START;
		xen_e820_table.entries[xen_e820_table.nr_entries].type = E820_TYPE_RESERVED;
		xen_e820_table.nr_entries++;
#endif
	}

	/* Make sure the Xen-supplied memory map is well-ordered. */
	e820__update_table(&xen_e820_table);

	/*
	 * Check whether the kernel itself conflicts with the target E820 map.
	 * Failing now is better than running into weird problems later due
	 * to relocating (and even reusing) pages with kernel text or data.
	 */
	xen_chk_is_e820_usable(__pa_symbol(_text),
			       __pa_symbol(_end) - __pa_symbol(_text),
			       "kernel");

	/*
	 * Check for a conflict of the xen_start_info memory with the target
	 * E820 map.
	 */
	xen_chk_is_e820_usable(__pa(xen_start_info), sizeof(*xen_start_info),
			       "xen_start_info");

	/*
	 * Check for a conflict of the hypervisor supplied page tables with
	 * the target E820 map.
	 */
	xen_pt_check_e820();

	max_pages = xen_get_max_pages();

	/* How many extra pages do we need due to remapping? */
	max_pages += xen_foreach_remap_area(xen_count_remap_pages);

	if (max_pages > ini_nr_pages)
		extra_pages += max_pages - ini_nr_pages;

	/*
	 * Clamp the amount of extra memory to a EXTRA_MEM_RATIO
	 * factor the base size.
	 *
	 * Make sure we have no memory above max_pages, as this area
	 * isn't handled by the p2m management.
	 */
	maxmem_pages = EXTRA_MEM_RATIO * min(ini_nr_pages, PFN_DOWN(MAXMEM));
	extra_pages = min3(maxmem_pages, extra_pages, max_pages - ini_nr_pages);
	i = 0;
	addr = xen_e820_table.entries[0].addr;
	size = xen_e820_table.entries[0].size;
	while (i < xen_e820_table.nr_entries) {
		bool discard = false;

		chunk_size = size;
		type = xen_e820_table.entries[i].type;

		if (type == E820_TYPE_RESERVED)
			xen_pv_pci_possible = true;

		if (type == E820_TYPE_RAM) {
			if (addr < mem_end) {
				chunk_size = min(size, mem_end - addr);
			} else if (extra_pages) {
				chunk_size = min(size, PFN_PHYS(extra_pages));
				pfn_s = PFN_UP(addr);
				n_pfns = PFN_DOWN(addr + chunk_size) - pfn_s;
				extra_pages -= n_pfns;
				xen_add_extra_mem(pfn_s, n_pfns);
				xen_max_p2m_pfn = pfn_s + n_pfns;
			} else
				discard = true;
		}

		if (!discard)
			xen_align_and_add_e820_region(addr, chunk_size, type);

		addr += chunk_size;
		size -= chunk_size;
		if (size == 0) {
			i++;
			if (i < xen_e820_table.nr_entries) {
				addr = xen_e820_table.entries[i].addr;
				size = xen_e820_table.entries[i].size;
			}
		}
	}

	/*
	 * Set the rest as identity mapped, in case PCI BARs are
	 * located here.
	 */
	set_phys_range_identity(addr / PAGE_SIZE, ~0ul);

	/*
	 * In domU, the ISA region is normal, usable memory, but we
	 * reserve ISA memory anyway because too many things poke
	 * about in there.
	 */
	e820__range_add(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS, E820_TYPE_RESERVED);

	e820__update_table(e820_table);

	xen_reserve_xen_mfnlist();

	/* Check for a conflict of the initrd with the target E820 map. */
	if (xen_is_e820_reserved(boot_params.hdr.ramdisk_image,
				 boot_params.hdr.ramdisk_size)) {
		phys_addr_t new_area, start, size;

		new_area = xen_find_free_area(boot_params.hdr.ramdisk_size);
		if (!new_area) {
			xen_raw_console_write("Can't find new memory area for initrd needed due to E820 map conflict\n");
			BUG();
		}

		start = boot_params.hdr.ramdisk_image;
		size = boot_params.hdr.ramdisk_size;
		xen_phys_memcpy(new_area, start, size);
		pr_info("initrd moved from [mem %#010llx-%#010llx] to [mem %#010llx-%#010llx]\n",
			start, start + size, new_area, new_area + size);
		memblock_phys_free(start, size);
		boot_params.hdr.ramdisk_image = new_area;
		boot_params.ext_ramdisk_image = new_area >> 32;
	}

	/*
	 * Set identity map on non-RAM pages and prepare remapping the
	 * underlying RAM.
	 */
	xen_foreach_remap_area(xen_set_identity_and_remap_chunk);

	pr_info("Released %ld page(s)\n", xen_released_pages);

	return "Xen";
}

static int register_callback(unsigned type, const void *func)
{
	struct callback_register callback = {
		.type = type,
		.address = XEN_CALLBACK(__KERNEL_CS, func),
		.flags = CALLBACKF_mask_events,
	};

	return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
}

void xen_enable_sysenter(void)
{
	if (cpu_feature_enabled(X86_FEATURE_SYSENTER32) &&
	    register_callback(CALLBACKTYPE_sysenter, xen_entry_SYSENTER_compat))
		setup_clear_cpu_cap(X86_FEATURE_SYSENTER32);
}

void xen_enable_syscall(void)
{
	int ret;

	ret = register_callback(CALLBACKTYPE_syscall, xen_entry_SYSCALL_64);
	if (ret != 0) {
		printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
		/* Pretty fatal; 64-bit userspace has no other
		   mechanism for syscalls. */
	}

	if (cpu_feature_enabled(X86_FEATURE_SYSCALL32) &&
	    register_callback(CALLBACKTYPE_syscall32, xen_entry_SYSCALL_compat))
		setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
}

static void __init xen_pvmmu_arch_setup(void)
{
	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);

	if (register_callback(CALLBACKTYPE_event,
			      xen_asm_exc_xen_hypervisor_callback) ||
	    register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
		BUG();

	xen_enable_sysenter();
	xen_enable_syscall();
}

/* This function is not called for HVM domains */
void __init xen_arch_setup(void)
{
	xen_panic_handler_init();
	xen_pvmmu_arch_setup();

#ifdef CONFIG_ACPI
	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
		disable_acpi();
	}
#endif

	memcpy(boot_command_line, xen_start_info->cmd_line,
	       MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
	       COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);

	/* Set up idle, making sure it calls safe_halt() pvop */
	disable_cpuidle();
	disable_cpufreq();
	WARN_ON(xen_set_default_idle());
#ifdef CONFIG_NUMA
	numa_off = 1;
#endif
}