[linux-2.6-block.git] / arch / arm / mach-omap2 / Makefile

#
# Makefile for the linux kernel.
#

# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
	 common.o gpio.o dma.o wd_timer.o

omap-2-3-common				= irq.o sdrc.o
hwmod-common				= omap_hwmod.o \
					  omap_hwmod_common_data.o
clock-common				= clock.o clock_common_data.o \
					  clkt_dpll.o clkt_clksel.o

obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)

obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

obj-$(CONFIG_TWL4030_CORE) += omap_twl.o

# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o

plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)

# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o

AFLAGS_sram242x.o			:=-Wa,-march=armv6
AFLAGS_sram243x.o			:=-Wa,-march=armv6
AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a

# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o

# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o

# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
obj-y					+= opp.o
obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
endif

# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
					   cpuidle34xx.o
obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o
obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o

AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)

ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o				+= -DDEBUG
endif

endif

# PRCM
obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
					   vc3xxx_data.o vp3xxx_data.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
					   cm44xx.o prcm_mpu44xx.o \
					   prminst44xx.o vc44xx_data.o \
					   vp44xx_data.o

# OMAP voltage domains
ifeq ($(CONFIG_PM),y)
voltagedomain-common			:= voltage.o
obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common) \
					   voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common) \
					   voltagedomains44xx_data.o
endif

# OMAP powerdomain framework
powerdomain-common			+= powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains2xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains3xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
					   powerdomain44xx.o \
					   powerdomains44xx_data.o

# PRCM clockdomain control
obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
					   clockdomain2xxx_3xxx.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
					   clockdomain2xxx_3xxx.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
					   clockdomain44xx.o \
					   clockdomains44xx_data.o

# Clock framework
obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
					   clkt2xxx_sys.o \
					   clkt2xxx_dpllcore.o \
					   clkt2xxx_virt_prcm_set.o \
					   clkt2xxx_apll.o clkt2xxx_osc.o \
					   clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
					   clock34xx.o clkt34xx_dpll3m2.o \
					   clock3517.o clock36xx.o \
					   dpll3xxx.o clock3xxx_data.o \
					   clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
					   dpll3xxx.o dpll44xx.o

# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o

# hwmod data
obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o \
					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
					   omap_hwmod_2xxx_interconnect_data.o \
					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
					   omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o \
					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
					   omap_hwmod_2xxx_interconnect_data.o \
					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
					   omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o \
					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
					   omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o

# EMU peripherals
obj-$(CONFIG_OMAP3_EMU)			+= emu.o

# L3 interconnect
obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o

obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
mailbox_mach-objs			:= mailbox.o

obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o

iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
obj-y					+= $(iommu-m) $(iommu-y)

i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
obj-y					+= $(i2c-omap-m) $(i2c-omap-y)

ifneq ($(CONFIG_TIDSPBRIDGE),)
obj-y					+= dsp.o
endif

# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
					   hsmmc.o
obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                           hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
					   hsmmc.o \
					   board-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
					   sdram-nokia.o \
					   hsmmc.o
obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
					   sdram-nokia.o \
					   board-rx51-peripherals.o \
					   board-rx51-video.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
					   hsmmc.o

obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o

obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o

obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
					   hsmmc.o
obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
# Platform specific device init code
usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
obj-y					+= $(usbfs-m) $(usbfs-y)
obj-y					+= usb-musb.o
obj-y					+= omap_phy_internal.o

obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
obj-y					+= usb-host.o

onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
obj-y					+= $(onenand-m) $(onenand-y)

nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
obj-y					+= $(nand-m) $(nand-y)

smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
obj-y					+= $(smc91x-m) $(smc91x-y)

smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
obj-y					+= $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o

disp-$(CONFIG_OMAP2_DSS)		:= display.o
obj-y					+= $(disp-m) $(disp-y)

obj-y					+= common-board-devices.o twl-common.o
Commit	Line	Data
	1	#
	2	# Makefile for the linux kernel.
	3	#
	4
	5	# Common support
	6	obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
	7	common.o gpio.o dma.o wd_timer.o
	8
	9	omap-2-3-common = irq.o sdrc.o
	10	hwmod-common = omap_hwmod.o \
	11	omap_hwmod_common_data.o
	12	clock-common = clock.o clock_common_data.o \
	13	clkt_dpll.o clkt_clksel.o
	14
	15	obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
	16	obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
	17	obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
	18
	19	obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
	20
	21	obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
	22
	23	# SMP support ONLY available for OMAP4
	24	obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
	25	obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
	26	obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
	27	obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
	28
	29	plus_sec := $(call as-instr,.arch_extension sec,+sec)
	30	AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
	31	AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
	32
	33	# Functions loaded to SRAM
	34	obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
	35	obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
	36	obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
	37
	38	AFLAGS_sram242x.o :=-Wa,-march=armv6
	39	AFLAGS_sram243x.o :=-Wa,-march=armv6
	40	AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
	41
	42	# Pin multiplexing
	43	obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
	44	obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
	45	obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
	46	obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
	47
	48	# SMS/SDRC
	49	obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
	50	# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
	51
	52	# OPP table initialization
	53	ifeq ($(CONFIG_PM_OPP),y)
	54	obj-y += opp.o
	55	obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
	56	obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
	57	endif
	58
	59	# Power Management
	60	ifeq ($(CONFIG_PM),y)
	61	obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
	62	obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
	63	obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
	64	cpuidle34xx.o
	65	obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
	66	obj-$(CONFIG_PM_DEBUG) += pm-debug.o
	67	obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
	68	obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
	69
	70	AFLAGS_sleep24xx.o :=-Wa,-march=armv6
	71	AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
	72
	73	ifeq ($(CONFIG_PM_VERBOSE),y)
	74	CFLAGS_pm_bus.o += -DDEBUG
	75	endif
	76
	77	endif
	78
	79	# PRCM
	80	obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	81	obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
	82	vc3xxx_data.o vp3xxx_data.o
	83	# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
	84	# will be removed once the OMAP4 part of the codebase is converted to
	85	# use OMAP4-specific PRCM functions.
	86	obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
	87	cm44xx.o prcm_mpu44xx.o \
	88	prminst44xx.o vc44xx_data.o \
	89	vp44xx_data.o
	90
	91	# OMAP voltage domains
	92	ifeq ($(CONFIG_PM),y)
	93	voltagedomain-common := voltage.o
	94	obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
	95	obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
	96	voltagedomains3xxx_data.o
	97	obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
	98	voltagedomains44xx_data.o
	99	endif
	100
	101	# OMAP powerdomain framework
	102	powerdomain-common += powerdomain.o powerdomain-common.o
	103	obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
	104	powerdomain2xxx_3xxx.o \
	105	powerdomains2xxx_data.o \
	106	powerdomains2xxx_3xxx_data.o
	107	obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
	108	powerdomain2xxx_3xxx.o \
	109	powerdomains3xxx_data.o \
	110	powerdomains2xxx_3xxx_data.o
	111	obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
	112	powerdomain44xx.o \
	113	powerdomains44xx_data.o
	114
	115	# PRCM clockdomain control
	116	obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
	117	clockdomain2xxx_3xxx.o \
	118	clockdomains2xxx_3xxx_data.o
	119	obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
	120	clockdomain2xxx_3xxx.o \
	121	clockdomains2xxx_3xxx_data.o
	122	obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
	123	clockdomain44xx.o \
	124	clockdomains44xx_data.o
	125
	126	# Clock framework
	127	obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
	128	clkt2xxx_sys.o \
	129	clkt2xxx_dpllcore.o \
	130	clkt2xxx_virt_prcm_set.o \
	131	clkt2xxx_apll.o clkt2xxx_osc.o \
	132	clkt2xxx_dpll.o clkt_iclk.o
	133	obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
	134	obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
	135	obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
	136	clock34xx.o clkt34xx_dpll3m2.o \
	137	clock3517.o clock36xx.o \
	138	dpll3xxx.o clock3xxx_data.o \
	139	clkt_iclk.o
	140	obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
	141	dpll3xxx.o dpll44xx.o
	142
	143	# OMAP2 clock rate set data (old "OPP" data)
	144	obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
	145	obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
	146
	147	# hwmod data
	148	obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
	149	omap_hwmod_2xxx_3xxx_ipblock_data.o \
	150	omap_hwmod_2xxx_interconnect_data.o \
	151	omap_hwmod_2xxx_3xxx_interconnect_data.o \
	152	omap_hwmod_2420_data.o
	153	obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
	154	omap_hwmod_2xxx_3xxx_ipblock_data.o \
	155	omap_hwmod_2xxx_interconnect_data.o \
	156	omap_hwmod_2xxx_3xxx_interconnect_data.o \
	157	omap_hwmod_2430_data.o
	158	obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
	159	omap_hwmod_2xxx_3xxx_interconnect_data.o \
	160	omap_hwmod_3xxx_data.o
	161	obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
	162
	163	# EMU peripherals
	164	obj-$(CONFIG_OMAP3_EMU) += emu.o
	165
	166	# L3 interconnect
	167	obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
	168	obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
	169
	170	obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
	171	mailbox_mach-objs := mailbox.o
	172
	173	obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
	174
	175	iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
	176	obj-y += $(iommu-m) $(iommu-y)
	177
	178	i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
	179	obj-y += $(i2c-omap-m) $(i2c-omap-y)
	180
	181	ifneq ($(CONFIG_TIDSPBRIDGE),)
	182	obj-y += dsp.o
	183	endif
	184
	185	# Specific board support
	186	obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
	187	obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
	188	obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
	189	hsmmc.o
	190	obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
	191	obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
	192	hsmmc.o
	193	obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
	194	hsmmc.o
	195	obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
	196	board-flash.o \
	197	hsmmc.o
	198	obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
	199	hsmmc.o
	200	obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
	201	hsmmc.o
	202	obj-$(CONFIG_MACH_OVERO) += board-overo.o \
	203	hsmmc.o
	204	obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
	205	hsmmc.o
	206	obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
	207	hsmmc.o
	208	obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
	209	hsmmc.o \
	210	board-flash.o
	211	obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
	212	obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
	213	sdram-nokia.o \
	214	hsmmc.o
	215	obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
	216	sdram-nokia.o \
	217	board-rx51-peripherals.o \
	218	board-rx51-video.o \
	219	hsmmc.o
	220	obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
	221	board-zoom-peripherals.o \
	222	board-zoom-display.o \
	223	board-flash.o \
	224	hsmmc.o \
	225	board-zoom-debugboard.o
	226	obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
	227	board-zoom-peripherals.o \
	228	board-zoom-display.o \
	229	board-flash.o \
	230	hsmmc.o \
	231	board-zoom-debugboard.o
	232	obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
	233	board-zoom-peripherals.o \
	234	board-zoom-display.o \
	235	board-flash.o \
	236	hsmmc.o
	237	obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
	238	hsmmc.o
	239	obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
	240	obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
	241	hsmmc.o
	242	obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
	243	hsmmc.o
	244	obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
	245	hsmmc.o
	246	obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
	247	hsmmc.o
	248
	249	obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
	250
	251	obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
	252
	253	obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
	254	hsmmc.o
	255	obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
	256	# Platform specific device init code
	257	usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
	258	obj-y += $(usbfs-m) $(usbfs-y)
	259	obj-y += usb-musb.o
	260	obj-y += omap_phy_internal.o
	261
	262	obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
	263	obj-y += usb-host.o
	264
	265	onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
	266	obj-y += $(onenand-m) $(onenand-y)
	267
	268	nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
	269	obj-y += $(nand-m) $(nand-y)
	270
	271	smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
	272	obj-y += $(smc91x-m) $(smc91x-y)
	273
	274	smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
	275	obj-y += $(smsc911x-m) $(smsc911x-y)
	276	obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
	277
	278	disp-$(CONFIG_OMAP2_DSS) := display.o
	279	obj-y += $(disp-m) $(disp-y)
	280
	281	obj-y += common-board-devices.o twl-common.o