| 1 | Broadcom BCM3380-style Level 1 / Level 2 interrupt controller |
| 2 | |
| 3 | This interrupt controller shows up in various forms on many BCM338x/BCM63xx |
| 4 | chipsets. It has the following properties: |
| 5 | |
| 6 | - outputs a single interrupt signal to its interrupt controller parent |
| 7 | |
| 8 | - contains one or more enable/status word pairs, which often appear at |
| 9 | different offsets in different blocks |
| 10 | |
| 11 | - no atomic set/clear operations |
| 12 | |
| 13 | Required properties: |
| 14 | |
| 15 | - compatible: should be "brcm,bcm3380-l2-intc" |
| 16 | - reg: specifies one or more enable/status pairs, in the following format: |
| 17 | <enable_reg 0x4 status_reg 0x4>... |
| 18 | - interrupt-controller: identifies the node as an interrupt controller |
| 19 | - #interrupt-cells: specifies the number of cells needed to encode an interrupt |
| 20 | source, should be 1. |
| 21 | - interrupt-parent: specifies the phandle to the parent interrupt controller |
| 22 | this one is cascaded from |
| 23 | - interrupts: specifies the interrupt line in the interrupt-parent controller |
| 24 | node, valid values depend on the type of parent interrupt controller |
| 25 | |
| 26 | Optional properties: |
| 27 | |
| 28 | - brcm,irq-can-wake: if present, this means the L2 controller can be used as a |
| 29 | wakeup source for system suspend/resume. |
| 30 | |
| 31 | Example: |
| 32 | |
| 33 | irq0_intc: interrupt-controller@10000020 { |
| 34 | compatible = "brcm,bcm3380-l2-intc"; |
| 35 | reg = <0x10000024 0x4 0x1000002c 0x4>, |
| 36 | <0x10000020 0x4 0x10000028 0x4>; |
| 37 | interrupt-controller; |
| 38 | #interrupt-cells = <1>; |
| 39 | interrupt-parent = <&cpu_intc>; |
| 40 | interrupts = <2>; |
| 41 | }; |